summaryrefslogtreecommitdiffstats
path: root/arch/x86/pci
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2007-10-11 11:17:12 +0200
committerThomas Gleixner <tglx@linutronix.de>2007-10-11 11:17:12 +0200
commitf68c065491ceda1ad00f8dc493e274a79b8c2ba4 (patch)
treecff56e1483deb0f96d3a001845e8db3f0f2d6b0b /arch/x86/pci
parent7648b1330c335601b7c09c25f77a03cda128fcab (diff)
downloadop-kernel-dev-f68c065491ceda1ad00f8dc493e274a79b8c2ba4.zip
op-kernel-dev-f68c065491ceda1ad00f8dc493e274a79b8c2ba4.tar.gz
x86_64: move pci
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/x86/pci')
-rw-r--r--arch/x86/pci/Makefile2
-rw-r--r--arch/x86/pci/Makefile_6417
-rw-r--r--arch/x86/pci/k8-bus_64.c83
-rw-r--r--arch/x86/pci/mmconfig_64.c157
4 files changed, 258 insertions, 1 deletions
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index b3e54c4..c5c8e48 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -1,5 +1,5 @@
ifeq ($(CONFIG_X86_32),y)
include ${srctree}/arch/x86/pci/Makefile_32
else
-include ${srctree}/arch/x86_64/pci/Makefile_64
+include ${srctree}/arch/x86/pci/Makefile_64
endif
diff --git a/arch/x86/pci/Makefile_64 b/arch/x86/pci/Makefile_64
new file mode 100644
index 0000000..7d8c467
--- /dev/null
+++ b/arch/x86/pci/Makefile_64
@@ -0,0 +1,17 @@
+#
+# Makefile for X86_64 specific PCI routines
+#
+# Reuse the i386 PCI subsystem
+#
+EXTRA_CFLAGS += -Iarch/x86/pci
+
+obj-y := i386.o
+obj-$(CONFIG_PCI_DIRECT)+= direct.o
+obj-y += fixup.o init.o
+obj-$(CONFIG_ACPI) += acpi.o
+obj-y += legacy.o irq.o common.o early.o
+# mmconfig has a 64bit special
+obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o
+
+obj-$(CONFIG_NUMA) += k8-bus_64.o
+
diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/k8-bus_64.c
new file mode 100644
index 0000000..9cc813e
--- /dev/null
+++ b/arch/x86/pci/k8-bus_64.c
@@ -0,0 +1,83 @@
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/mpspec.h>
+#include <linux/cpumask.h>
+
+/*
+ * This discovers the pcibus <-> node mapping on AMD K8.
+ *
+ * RED-PEN need to call this again on PCI hotplug
+ * RED-PEN empty cpus get reported wrong
+ */
+
+#define NODE_ID_REGISTER 0x60
+#define NODE_ID(dword) (dword & 0x07)
+#define LDT_BUS_NUMBER_REGISTER_0 0x94
+#define LDT_BUS_NUMBER_REGISTER_1 0xB4
+#define LDT_BUS_NUMBER_REGISTER_2 0xD4
+#define NR_LDT_BUS_NUMBER_REGISTERS 3
+#define SECONDARY_LDT_BUS_NUMBER(dword) ((dword >> 8) & 0xFF)
+#define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF)
+#define PCI_DEVICE_ID_K8HTCONFIG 0x1100
+
+/**
+ * fill_mp_bus_to_cpumask()
+ * fills the mp_bus_to_cpumask array based according to the LDT Bus Number
+ * Registers found in the K8 northbridge
+ */
+__init static int
+fill_mp_bus_to_cpumask(void)
+{
+ struct pci_dev *nb_dev = NULL;
+ int i, j;
+ u32 ldtbus, nid;
+ static int lbnr[3] = {
+ LDT_BUS_NUMBER_REGISTER_0,
+ LDT_BUS_NUMBER_REGISTER_1,
+ LDT_BUS_NUMBER_REGISTER_2
+ };
+
+ while ((nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ PCI_DEVICE_ID_K8HTCONFIG, nb_dev))) {
+ pci_read_config_dword(nb_dev, NODE_ID_REGISTER, &nid);
+
+ for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) {
+ pci_read_config_dword(nb_dev, lbnr[i], &ldtbus);
+ /*
+ * if there are no busses hanging off of the current
+ * ldt link then both the secondary and subordinate
+ * bus number fields are set to 0.
+ *
+ * RED-PEN
+ * This is slightly broken because it assumes
+ * HT node IDs == Linux node ids, which is not always
+ * true. However it is probably mostly true.
+ */
+ if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0
+ && SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) {
+ for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus);
+ j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus);
+ j++) {
+ struct pci_bus *bus;
+ struct pci_sysdata *sd;
+
+ long node = NODE_ID(nid);
+ /* Algorithm a bit dumb, but
+ it shouldn't matter here */
+ bus = pci_find_bus(0, j);
+ if (!bus)
+ continue;
+ if (!node_online(node))
+ node = 0;
+
+ sd = bus->sysdata;
+ sd->node = node;
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+fs_initcall(fill_mp_bus_to_cpumask);
diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c
new file mode 100644
index 0000000..4095e4d
--- /dev/null
+++ b/arch/x86/pci/mmconfig_64.c
@@ -0,0 +1,157 @@
+/*
+ * mmconfig.c - Low-level direct PCI config space access via MMCONFIG
+ *
+ * This is an 64bit optimized version that always keeps the full mmconfig
+ * space mapped. This allows lockless config space operation.
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/bitmap.h>
+#include <asm/e820.h>
+
+#include "pci.h"
+
+/* Static virtual mapping of the MMCONFIG aperture */
+struct mmcfg_virt {
+ struct acpi_mcfg_allocation *cfg;
+ char __iomem *virt;
+};
+static struct mmcfg_virt *pci_mmcfg_virt;
+
+static char __iomem *get_virt(unsigned int seg, unsigned bus)
+{
+ struct acpi_mcfg_allocation *cfg;
+ int cfg_num;
+
+ for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) {
+ cfg = pci_mmcfg_virt[cfg_num].cfg;
+ if (cfg->pci_segment == seg &&
+ (cfg->start_bus_number <= bus) &&
+ (cfg->end_bus_number >= bus))
+ return pci_mmcfg_virt[cfg_num].virt;
+ }
+
+ /* Fall back to type 0 */
+ return NULL;
+}
+
+static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
+{
+ char __iomem *addr;
+ if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS &&
+ test_bit(32*bus + PCI_SLOT(devfn), pci_mmcfg_fallback_slots))
+ return NULL;
+ addr = get_virt(seg, bus);
+ if (!addr)
+ return NULL;
+ return addr + ((bus << 20) | (devfn << 12));
+}
+
+static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 *value)
+{
+ char __iomem *addr;
+
+ /* Why do we have this when nobody checks it. How about a BUG()!? -AK */
+ if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) {
+ *value = -1;
+ return -EINVAL;
+ }
+
+ addr = pci_dev_base(seg, bus, devfn);
+ if (!addr)
+ return pci_conf1_read(seg,bus,devfn,reg,len,value);
+
+ switch (len) {
+ case 1:
+ *value = mmio_config_readb(addr + reg);
+ break;
+ case 2:
+ *value = mmio_config_readw(addr + reg);
+ break;
+ case 4:
+ *value = mmio_config_readl(addr + reg);
+ break;
+ }
+
+ return 0;
+}
+
+static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 value)
+{
+ char __iomem *addr;
+
+ /* Why do we have this when nobody checks it. How about a BUG()!? -AK */
+ if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
+ return -EINVAL;
+
+ addr = pci_dev_base(seg, bus, devfn);
+ if (!addr)
+ return pci_conf1_write(seg,bus,devfn,reg,len,value);
+
+ switch (len) {
+ case 1:
+ mmio_config_writeb(addr + reg, value);
+ break;
+ case 2:
+ mmio_config_writew(addr + reg, value);
+ break;
+ case 4:
+ mmio_config_writel(addr + reg, value);
+ break;
+ }
+
+ return 0;
+}
+
+static struct pci_raw_ops pci_mmcfg = {
+ .read = pci_mmcfg_read,
+ .write = pci_mmcfg_write,
+};
+
+static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg)
+{
+ void __iomem *addr;
+ u32 size;
+
+ size = (cfg->end_bus_number + 1) << 20;
+ addr = ioremap_nocache(cfg->address, size);
+ if (addr) {
+ printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n",
+ cfg->address, cfg->address + size - 1);
+ }
+ return addr;
+}
+
+int __init pci_mmcfg_arch_reachable(unsigned int seg, unsigned int bus,
+ unsigned int devfn)
+{
+ return pci_dev_base(seg, bus, devfn) != NULL;
+}
+
+int __init pci_mmcfg_arch_init(void)
+{
+ int i;
+ pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) *
+ pci_mmcfg_config_num, GFP_KERNEL);
+ if (pci_mmcfg_virt == NULL) {
+ printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
+ return 0;
+ }
+
+ for (i = 0; i < pci_mmcfg_config_num; ++i) {
+ pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
+ pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]);
+ if (!pci_mmcfg_virt[i].virt) {
+ printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
+ "segment %d\n",
+ pci_mmcfg_config[i].pci_segment);
+ return 0;
+ }
+ }
+ raw_pci_ops = &pci_mmcfg;
+ return 1;
+}
OpenPOWER on IntegriCloud