Merge branch 'pm-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus

9 files changed, 86 insertions, 28 deletions

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 9e13763..1e99475 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -45,6 +45,7 @@ obj-y			+= pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
 obj-y			+= alternative.o i8253.o pci-nommu.o hw_breakpoint.o
 obj-y			+= tsc.o io_delay.o rtc.o
 obj-y			+= pci-iommu_table.o
+obj-y			+= resource.o
 
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
 obj-y				+= process.o
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 3f838d5..7821813 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1389,6 +1389,14 @@ void __cpuinit end_local_APIC_setup(void)
 
 	setup_apic_nmi_watchdog(NULL);
 	apic_pm_activate();
+
+	/*
+	 * Now that local APIC setup is completed for BP, configure the fault
+	 * handling for interrupt remapping.
+	 */
+	if (!smp_processor_id() && intr_remapping_enabled)
+		enable_drhd_fault_handling();
+
 }
 
 #ifdef CONFIG_X86_X2APIC
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 7cc0a72..fadcd74 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2430,13 +2430,12 @@ static void ack_apic_level(struct irq_data *data)
 {
 	struct irq_cfg *cfg = data->chip_data;
 	int i, do_unmask_irq = 0, irq = data->irq;
-	struct irq_desc *desc = irq_to_desc(irq);
 	unsigned long v;
 
 	irq_complete_move(cfg);
 #ifdef CONFIG_GENERIC_PENDING_IRQ
 	/* If we are moving the irq we need to mask it */
-	if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
+	if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) {
 		do_unmask_irq = 1;
 		mask_ioapic(cfg);
 	}
@@ -3413,6 +3412,7 @@ dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
 	msg.data |= MSI_DATA_VECTOR(cfg->vector);
 	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
 	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+	msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest);
 
 	dmar_msi_write(irq, &msg);
 
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index f9e4e6a..d8c4a6f 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -79,13 +79,6 @@ void __init default_setup_apic_routing(void)
 		/* need to update phys_pkg_id */
 		apic->phys_pkg_id = apicid_phys_pkg_id;
 	}
-
-	/*
-	 * Now that apic routing model is selected, configure the
-	 * fault handling for intr remapping.
-	 */
-	if (intr_remapping_enabled)
-		enable_drhd_fault_handling();
 }
 
 /* Same for both flat and physical. */
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index bcece91..c0dbd9a 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -60,16 +60,18 @@
 #define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
 #endif
 
+/* Number of possible pages in the lowmem region */
+LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT)
+	
 /* Enough space to fit pagetables for the low memory linear map */
-MAPPING_BEYOND_END = \
-	PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
+MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT
 
 /*
  * Worst-case size of the kernel mapping we need to make:
- * the worst-case size of the kernel itself, plus the extra we need
- * to map for the linear map.
+ * a relocatable kernel can live anywhere in lowmem, so we need to be able
+ * to map all of lowmem.
  */
-KERNEL_PAGES = (KERNEL_IMAGE_SIZE + MAPPING_BEYOND_END)>>PAGE_SHIFT
+KERNEL_PAGES = LOWMEM_PAGES
 
 INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE_asm
 RESERVE_BRK(pagetables, INIT_MAP_SIZE)
@@ -620,13 +622,13 @@ ENTRY(initial_code)
 __PAGE_ALIGNED_BSS
 	.align PAGE_SIZE_asm
 #ifdef CONFIG_X86_PAE
-initial_pg_pmd:
+ENTRY(initial_pg_pmd)
 	.fill 1024*KPMDS,4,0
 #else
 ENTRY(initial_page_table)
 	.fill 1024,4,0
 #endif
-initial_pg_fixmap:
+ENTRY(initial_pg_fixmap)
 	.fill 1024,4,0
 ENTRY(empty_zero_page)
 	.fill 4096,1,0
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ae03cab..4ff5968 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -27,6 +27,9 @@
 #define HPET_DEV_FSB_CAP		0x1000
 #define HPET_DEV_PERI_CAP		0x2000
 
+#define HPET_MIN_CYCLES			128
+#define HPET_MIN_PROG_DELTA		(HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
+
 #define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
 
 /*
@@ -299,8 +302,9 @@ static void hpet_legacy_clockevent_register(void)
 	/* Calculate the min / max delta */
 	hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
 							   &hpet_clockevent);
-	/* 5 usec minimum reprogramming delta. */
-	hpet_clockevent.min_delta_ns = 5000;
+	/* Setup minimum reprogramming delta. */
+	hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA,
+							   &hpet_clockevent);
 
 	/*
 	 * Start hpet with the boot cpu mask and make it
@@ -393,22 +397,24 @@ static int hpet_next_event(unsigned long delta,
 	 * the wraparound into account) nor a simple count down event
 	 * mode. Further the write to the comparator register is
 	 * delayed internally up to two HPET clock cycles in certain
-	 * chipsets (ATI, ICH9,10). We worked around that by reading
-	 * back the compare register, but that required another
-	 * workaround for ICH9,10 chips where the first readout after
-	 * write can return the old stale value. We already have a
-	 * minimum delta of 5us enforced, but a NMI or SMI hitting
+	 * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even
+	 * longer delays. We worked around that by reading back the
+	 * compare register, but that required another workaround for
+	 * ICH9,10 chips where the first readout after write can
+	 * return the old stale value. We already had a minimum
+	 * programming delta of 5us enforced, but a NMI or SMI hitting
 	 * between the counter readout and the comparator write can
 	 * move us behind that point easily. Now instead of reading
 	 * the compare register back several times, we make the ETIME
 	 * decision based on the following: Return ETIME if the
-	 * counter value after the write is less than 8 HPET cycles
+	 * counter value after the write is less than HPET_MIN_CYCLES
 	 * away from the event or if the counter is already ahead of
-	 * the event.
+	 * the event. The minimum programming delta for the generic
+	 * clockevents code is set to 1.5 * HPET_MIN_CYCLES.
 	 */
 	res = (s32)(cnt - hpet_readl(HPET_COUNTER));
 
-	return res < 8 ? -ETIME : 0;
+	return res < HPET_MIN_CYCLES ? -ETIME : 0;
 }
 
 static void hpet_legacy_set_mode(enum clock_event_mode mode,
diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c
new file mode 100644
index 0000000..2a26819
--- /dev/null
+++ b/arch/x86/kernel/resource.c
@@ -0,0 +1,48 @@
+#include <linux/ioport.h>
+#include <asm/e820.h>
+
+static void resource_clip(struct resource *res, resource_size_t start,
+			  resource_size_t end)
+{
+	resource_size_t low = 0, high = 0;
+
+	if (res->end < start || res->start > end)
+		return;		/* no conflict */
+
+	if (res->start < start)
+		low = start - res->start;
+
+	if (res->end > end)
+		high = res->end - end;
+
+	/* Keep the area above or below the conflict, whichever is larger */
+	if (low > high)
+		res->end = start - 1;
+	else
+		res->start = end + 1;
+}
+
+static void remove_e820_regions(struct resource *avail)
+{
+	int i;
+	struct e820entry *entry;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		entry = &e820.map[i];
+
+		resource_clip(avail, entry->addr,
+			      entry->addr + entry->size - 1);
+	}
+}
+
+void arch_remove_reservations(struct resource *avail)
+{
+	/* Trim out BIOS areas (low 1MB and high 2MB) and E820 regions */
+	if (avail->flags & IORESOURCE_MEM) {
+		if (avail->start < BIOS_END)
+			avail->start = BIOS_END;
+		resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END);
+
+		remove_e820_regions(avail);
+	}
+}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 21c6746..85268f8 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -769,7 +769,6 @@ void __init setup_arch(char **cmdline_p)
 
 	x86_init.oem.arch_setup();
 
-	resource_alloc_from_bottom = 0;
 	iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
 	setup_memory_map();
 	parse_setup_data();
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 9c253bd..5471285 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -394,7 +394,8 @@ static void __init setup_xstate_init(void)
 	 * Setup init_xstate_buf to represent the init state of
 	 * all the features managed by the xsave
 	 */
-	init_xstate_buf = alloc_bootmem(xstate_size);
+	init_xstate_buf = alloc_bootmem_align(xstate_size,
+					      __alignof__(struct xsave_struct));
 	init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
 
 	clts();