diff options
author | Ingo Molnar <mingo@elte.hu> | 2009-03-28 22:27:45 +0100 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2009-03-28 22:27:45 +0100 |
commit | 3fab191002b184e4390aa07c7149c6cc7b638ec7 (patch) | |
tree | 821382d49e47c19531bfc3bb9e1f8922486374d4 /arch/x86/kernel | |
parent | 93394a761d78503f11d05b1a7b23d5a9ccc8dad2 (diff) | |
parent | 7c730ccdc1188b97f5c8cb690906242c7ed75c22 (diff) | |
download | op-kernel-dev-3fab191002b184e4390aa07c7149c6cc7b638ec7.zip op-kernel-dev-3fab191002b184e4390aa07c7149c6cc7b638ec7.tar.gz |
Merge branch 'linus' into x86/core
Diffstat (limited to 'arch/x86/kernel')
24 files changed, 1036 insertions, 739 deletions
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig index 65792c2..52c8398 100644 --- a/arch/x86/kernel/cpu/cpufreq/Kconfig +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig @@ -87,30 +87,15 @@ config X86_POWERNOW_K7_ACPI config X86_POWERNOW_K8 tristate "AMD Opteron/Athlon64 PowerNow!" select CPU_FREQ_TABLE + depends on ACPI && ACPI_PROCESSOR help - This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors. + This adds the CPUFreq driver for K8/K10 Opteron/Athlon64 processors. To compile this driver as a module, choose M here: the module will be called powernow-k8. For details, take a look at <file:Documentation/cpu-freq/>. - If in doubt, say N. - -config X86_POWERNOW_K8_ACPI - bool - prompt "ACPI Support" if X86_32 - depends on ACPI && X86_POWERNOW_K8 && ACPI_PROCESSOR - depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m) - default y - help - This provides access to the K8s Processor Performance States via ACPI. - This driver is probably required for CPUFreq to work with multi-socket and - SMP systems. It is not required on at least some single-socket yet - multi-core systems, even if SMP is enabled. - - It is safe to say Y here. - config X86_GX_SUSPMOD tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation" depends on X86_32 && PCI diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile index 560f776..509296d 100644 --- a/arch/x86/kernel/cpu/cpufreq/Makefile +++ b/arch/x86/kernel/cpu/cpufreq/Makefile @@ -1,6 +1,11 @@ +# Link order matters. K8 is preferred to ACPI because of firmware bugs in early +# K8 systems. ACPI is preferred to all other hardware-specific drivers. +# speedstep-* is preferred over p4-clockmod. + +obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o +obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o obj-$(CONFIG_X86_POWERNOW_K6) += powernow-k6.o obj-$(CONFIG_X86_POWERNOW_K7) += powernow-k7.o -obj-$(CONFIG_X86_POWERNOW_K8) += powernow-k8.o obj-$(CONFIG_X86_LONGHAUL) += longhaul.o obj-$(CONFIG_X86_E_POWERSAVER) += e_powersaver.o obj-$(CONFIG_ELAN_CPUFREQ) += elanfreq.o @@ -10,7 +15,6 @@ obj-$(CONFIG_X86_GX_SUSPMOD) += gx-suspmod.o obj-$(CONFIG_X86_SPEEDSTEP_ICH) += speedstep-ich.o obj-$(CONFIG_X86_SPEEDSTEP_LIB) += speedstep-lib.o obj-$(CONFIG_X86_SPEEDSTEP_SMI) += speedstep-smi.o -obj-$(CONFIG_X86_ACPI_CPUFREQ) += acpi-cpufreq.o obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO) += speedstep-centrino.o obj-$(CONFIG_X86_P4_CLOCKMOD) += p4-clockmod.o obj-$(CONFIG_X86_CPUFREQ_NFORCE2) += cpufreq-nforce2.o diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 22590cf..23da96e 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -1,5 +1,5 @@ /* - * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.4 $) + * acpi-cpufreq.c - ACPI Processor P-States Driver * * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> @@ -36,16 +36,18 @@ #include <linux/ftrace.h> #include <linux/acpi.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/uaccess.h> + #include <acpi/processor.h> -#include <asm/io.h> #include <asm/msr.h> #include <asm/processor.h> #include <asm/cpufeature.h> -#include <asm/delay.h> -#include <asm/uaccess.h> -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "acpi-cpufreq", msg) MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski"); MODULE_DESCRIPTION("ACPI Processor P-States Driver"); @@ -95,7 +97,7 @@ static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data) perf = data->acpi_data; - for (i=0; i<perf->state_count; i++) { + for (i = 0; i < perf->state_count; i++) { if (value == perf->states[i].status) return data->freq_table[i].frequency; } @@ -110,7 +112,7 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data) msr &= INTEL_MSR_RANGE; perf = data->acpi_data; - for (i=0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { + for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { if (msr == perf->states[data->freq_table[i].index].status) return data->freq_table[i].frequency; } @@ -138,15 +140,13 @@ struct io_addr { u8 bit_width; }; -typedef union { - struct msr_addr msr; - struct io_addr io; -} drv_addr_union; - struct drv_cmd { unsigned int type; const struct cpumask *mask; - drv_addr_union addr; + union { + struct msr_addr msr; + struct io_addr io; + } addr; u32 val; }; @@ -369,7 +369,7 @@ static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq, unsigned int cur_freq; unsigned int i; - for (i=0; i<100; i++) { + for (i = 0; i < 100; i++) { cur_freq = extract_freq(get_cur_val(mask), data); if (cur_freq == freq) return 1; @@ -494,7 +494,7 @@ acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu) unsigned long freq; unsigned long freqn = perf->states[0].core_frequency * 1000; - for (i=0; i<(perf->state_count-1); i++) { + for (i = 0; i < (perf->state_count-1); i++) { freq = freqn; freqn = perf->states[i+1].core_frequency * 1000; if ((2 * cpu_khz) > (freqn + freq)) { @@ -673,7 +673,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) /* detect transition latency */ policy->cpuinfo.transition_latency = 0; - for (i=0; i<perf->state_count; i++) { + for (i = 0; i < perf->state_count; i++) { if ((perf->states[i].transition_latency * 1000) > policy->cpuinfo.transition_latency) policy->cpuinfo.transition_latency = @@ -682,8 +682,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) data->max_freq = perf->states[0].core_frequency * 1000; /* table init */ - for (i=0; i<perf->state_count; i++) { - if (i>0 && perf->states[i].core_frequency >= + for (i = 0; i < perf->state_count; i++) { + if (i > 0 && perf->states[i].core_frequency >= data->freq_table[valid_states-1].frequency / 1000) continue; diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c index 965ea52..733093d 100644 --- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c +++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c @@ -32,7 +32,7 @@ * nforce2_chipset: * FSB is changed using the chipset */ -static struct pci_dev *nforce2_chipset_dev; +static struct pci_dev *nforce2_dev; /* fid: * multiplier * 10 @@ -56,7 +56,9 @@ MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)"); MODULE_PARM_DESC(min_fsb, "Minimum FSB to use, if not defined: current FSB - 50"); -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg) +#define PFX "cpufreq-nforce2: " +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "cpufreq-nforce2", msg) /** * nforce2_calc_fsb - calculate FSB @@ -118,11 +120,11 @@ static void nforce2_write_pll(int pll) int temp; /* Set the pll addr. to 0x00 */ - pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, 0); + pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0); /* Now write the value in all 64 registers */ for (temp = 0; temp <= 0x3f; temp++) - pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, pll); + pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll); return; } @@ -139,8 +141,8 @@ static unsigned int nforce2_fsb_read(int bootfsb) u32 fsb, temp = 0; /* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */ - nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, - 0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL); + nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (!nforce2_sub5) return 0; @@ -148,13 +150,13 @@ static unsigned int nforce2_fsb_read(int bootfsb) fsb /= 1000000; /* Check if PLL register is already set */ - pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); if (bootfsb || !temp) return fsb; /* Use PLL register FSB value */ - pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp); + pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp); fsb = nforce2_calc_fsb(temp); return fsb; @@ -174,18 +176,18 @@ static int nforce2_set_fsb(unsigned int fsb) int pll = 0; if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) { - printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb); + printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb); return -EINVAL; } tfsb = nforce2_fsb_read(0); if (!tfsb) { - printk(KERN_ERR "cpufreq: Error while reading the FSB\n"); + printk(KERN_ERR PFX "Error while reading the FSB\n"); return -EINVAL; } /* First write? Then set actual value */ - pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp); + pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp); if (!temp) { pll = nforce2_calc_pll(tfsb); @@ -197,7 +199,7 @@ static int nforce2_set_fsb(unsigned int fsb) /* Enable write access */ temp = 0x01; - pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8)temp); + pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp); diff = tfsb - fsb; @@ -222,7 +224,7 @@ static int nforce2_set_fsb(unsigned int fsb) } temp = 0x40; - pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLADR, (u8)temp); + pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp); return 0; } @@ -244,7 +246,8 @@ static unsigned int nforce2_get(unsigned int cpu) * nforce2_target - set a new CPUFreq policy * @policy: new policy * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @relation: how that frequency relates to achieved frequency + * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) * * Sets a new CPUFreq policy. */ @@ -276,7 +279,7 @@ static int nforce2_target(struct cpufreq_policy *policy, /* local_irq_save(flags); */ if (nforce2_set_fsb(target_fsb) < 0) - printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n", + printk(KERN_ERR PFX "Changing FSB to %d failed\n", target_fsb); else dprintk("Changed FSB successfully to %d\n", @@ -327,8 +330,8 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) /* FIX: Get FID from CPU */ if (!fid) { if (!cpu_khz) { - printk(KERN_WARNING - "cpufreq: cpu_khz not set, can't calculate multiplier!\n"); + printk(KERN_WARNING PFX + "cpu_khz not set, can't calculate multiplier!\n"); return -ENODEV; } @@ -343,7 +346,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy) } } - printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb, + printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb, fid / 10, fid % 10); /* Set maximum FSB to FSB at boot time */ @@ -392,17 +395,18 @@ static struct cpufreq_driver nforce2_driver = { */ static unsigned int nforce2_detect_chipset(void) { - nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, + nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, PCI_ANY_ID, PCI_ANY_ID, NULL); - if (nforce2_chipset_dev == NULL) + if (nforce2_dev == NULL) return -ENODEV; - printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n", - nforce2_chipset_dev->revision); - printk(KERN_INFO - "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n"); + printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n", + nforce2_dev->revision); + printk(KERN_INFO PFX + "FSB changing is maybe unstable and can lead to " + "crashes and data loss.\n"); return 0; } @@ -420,7 +424,7 @@ static int __init nforce2_init(void) /* detect chipset */ if (nforce2_detect_chipset()) { - printk(KERN_ERR "cpufreq: No nForce2 chipset.\n"); + printk(KERN_INFO PFX "No nForce2 chipset.\n"); return -ENODEV; } diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c index 41ab3f0..35a257d 100644 --- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c +++ b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c @@ -12,12 +12,12 @@ #include <linux/cpufreq.h> #include <linux/ioport.h> #include <linux/slab.h> +#include <linux/timex.h> +#include <linux/io.h> +#include <linux/delay.h> #include <asm/msr.h> #include <asm/tsc.h> -#include <asm/timex.h> -#include <asm/io.h> -#include <asm/delay.h> #define EPS_BRAND_C7M 0 #define EPS_BRAND_C7 1 @@ -184,7 +184,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) break; } - switch(brand) { + switch (brand) { case EPS_BRAND_C7M: printk(KERN_CONT "C7-M\n"); break; @@ -218,17 +218,20 @@ static int eps_cpu_init(struct cpufreq_policy *policy) /* Print voltage and multiplier */ rdmsr(MSR_IA32_PERF_STATUS, lo, hi); current_voltage = lo & 0xff; - printk(KERN_INFO "eps: Current voltage = %dmV\n", current_voltage * 16 + 700); + printk(KERN_INFO "eps: Current voltage = %dmV\n", + current_voltage * 16 + 700); current_multiplier = (lo >> 8) & 0xff; printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier); /* Print limits */ max_voltage = hi & 0xff; - printk(KERN_INFO "eps: Highest voltage = %dmV\n", max_voltage * 16 + 700); + printk(KERN_INFO "eps: Highest voltage = %dmV\n", + max_voltage * 16 + 700); max_multiplier = (hi >> 8) & 0xff; printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier); min_voltage = (hi >> 16) & 0xff; - printk(KERN_INFO "eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700); + printk(KERN_INFO "eps: Lowest voltage = %dmV\n", + min_voltage * 16 + 700); min_multiplier = (hi >> 24) & 0xff; printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier); @@ -318,7 +321,7 @@ static int eps_cpu_exit(struct cpufreq_policy *policy) return 0; } -static struct freq_attr* eps_attr[] = { +static struct freq_attr *eps_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -356,7 +359,7 @@ static void __exit eps_exit(void) cpufreq_unregister_driver(&eps_driver); } -MODULE_AUTHOR("Rafał Bilski <rafalbilski@interia.pl>"); +MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>"); MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's."); MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c index fe613c9..006b278 100644 --- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c +++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c @@ -184,7 +184,8 @@ static int elanfreq_target(struct cpufreq_policy *policy, { unsigned int newstate = 0; - if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], + target_freq, relation, &newstate)) return -EINVAL; elanfreq_set_cpu_state(newstate); @@ -301,7 +302,8 @@ static void __exit elanfreq_exit(void) module_param(max_freq, int, 0444); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>"); +MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, " + "Sven Geggus <sven@geggus.net>"); MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); module_init(elanfreq_init); diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c index 9d9eae8..ac27ec2 100644 --- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c @@ -79,8 +79,9 @@ #include <linux/smp.h> #include <linux/cpufreq.h> #include <linux/pci.h> +#include <linux/errno.h> + #include <asm/processor-cyrix.h> -#include <asm/errno.h> /* PCI config registers, all at F0 */ #define PCI_PMER1 0x80 /* power management enable register 1 */ @@ -122,8 +123,8 @@ static struct gxfreq_params *gx_params; static int stock_freq; /* PCI bus clock - defaults to 30.000 if cpu_khz is not available */ -static int pci_busclk = 0; -module_param (pci_busclk, int, 0444); +static int pci_busclk; +module_param(pci_busclk, int, 0444); /* maximum duration for which the cpu may be suspended * (32us * MAX_DURATION). If no parameter is given, this defaults @@ -132,7 +133,7 @@ module_param (pci_busclk, int, 0444); * is suspended -- processing power is just 0.39% of what it used to be, * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ static int max_duration = 255; -module_param (max_duration, int, 0444); +module_param(max_duration, int, 0444); /* For the default policy, we want at least some processing power * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV) @@ -140,7 +141,8 @@ module_param (max_duration, int, 0444); #define POLICY_MIN_DIV 20 -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "gx-suspmod", msg) /** * we can detect a core multipiler from dir0_lsb @@ -166,12 +168,20 @@ static int gx_freq_mult[16] = { * Low Level chipset interface * ****************************************************************/ static struct pci_device_id gx_chipset_tbl[] __initdata = { - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, + PCI_ANY_ID, PCI_ANY_ID }, { 0, }, }; +static void gx_write_byte(int reg, int value) +{ + pci_write_config_byte(gx_params->cs55x0, reg, value); +} + /** * gx_detect_chipset: * @@ -200,7 +210,8 @@ static __init struct pci_dev *gx_detect_chipset(void) /** * gx_get_cpuspeed: * - * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs. + * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi + * Geode CPU runs. */ static unsigned int gx_get_cpuspeed(unsigned int cpu) { @@ -217,17 +228,18 @@ static unsigned int gx_get_cpuspeed(unsigned int cpu) * **/ -static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration) +static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, + u8 *off_duration) { unsigned int i; u8 tmp_on, tmp_off; int old_tmp_freq = stock_freq; int tmp_freq; - *off_duration=1; - *on_duration=0; + *off_duration = 1; + *on_duration = 0; - for (i=max_duration; i>0; i--) { + for (i = max_duration; i > 0; i--) { tmp_off = ((khz * i) / stock_freq) & 0xff; tmp_on = i - tmp_off; tmp_freq = (stock_freq * tmp_off) / i; @@ -259,26 +271,34 @@ static void gx_set_cpuspeed(unsigned int khz) freqs.cpu = 0; freqs.old = gx_get_cpuspeed(0); - new_khz = gx_validate_speed(khz, &gx_params->on_duration, &gx_params->off_duration); + new_khz = gx_validate_speed(khz, &gx_params->on_duration, + &gx_params->off_duration); freqs.new = new_khz; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); local_irq_save(flags); - if (new_khz != stock_freq) { /* if new khz == 100% of CPU speed, it is special case */ + + + if (new_khz != stock_freq) { + /* if new khz == 100% of CPU speed, it is special case */ switch (gx_params->cs55x0->device) { case PCI_DEVICE_ID_CYRIX_5530_LEGACY: pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP; /* FIXME: need to test other values -- Zwane,Miura */ - pci_write_config_byte(gx_params->cs55x0, PCI_IRQTC, 4); /* typical 2 to 4ms */ - pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */ - pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1); - - if (gx_params->cs55x0->revision < 0x10) { /* CS5530(rev 1.2, 1.3) */ - suscfg = gx_params->pci_suscfg | SUSMOD; - } else { /* CS5530A,B.. */ - suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE; + /* typical 2 to 4ms */ + gx_write_byte(PCI_IRQTC, 4); + /* typical 50 to 100ms */ + gx_write_byte(PCI_VIDTC, 100); + gx_write_byte(PCI_PMER1, pmer1); + + if (gx_params->cs55x0->revision < 0x10) { + /* CS5530(rev 1.2, 1.3) */ + suscfg = gx_params->pci_suscfg|SUSMOD; + } else { + /* CS5530A,B.. */ + suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE; } break; case PCI_DEVICE_ID_CYRIX_5520: @@ -294,13 +314,13 @@ static void gx_set_cpuspeed(unsigned int khz) suscfg = gx_params->pci_suscfg & ~(SUSMOD); gx_params->off_duration = 0; gx_params->on_duration = 0; - dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n"); + dprintk("suspend modulation disabled: cpu runs 100%% speed.\n"); } - pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration); - pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration); + gx_write_byte(PCI_MODOFF, gx_params->off_duration); + gx_write_byte(PCI_MODON, gx_params->on_duration); - pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); + gx_write_byte(PCI_SUSCFG, suscfg); pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); local_irq_restore(flags); @@ -334,7 +354,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) return -EINVAL; policy->cpu = 0; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); + cpufreq_verify_within_limits(policy, (stock_freq / max_duration), + stock_freq); /* it needs to be assured that at least one supported frequency is * within policy->min and policy->max. If it is not, policy->max @@ -354,7 +375,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) policy->max = tmp_freq; if (policy->max < policy->min) policy->max = policy->min; - cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); + cpufreq_verify_within_limits(policy, (stock_freq / max_duration), + stock_freq); return 0; } @@ -398,18 +420,18 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) return -ENODEV; /* determine maximum frequency */ - if (pci_busclk) { + if (pci_busclk) maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - } else if (cpu_khz) { + else if (cpu_khz) maxfreq = cpu_khz; - } else { + else maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f]; - } + stock_freq = maxfreq; curfreq = gx_get_cpuspeed(0); dprintk("cpu max frequency is %d.\n", maxfreq); - dprintk("cpu current frequency is %dkHz.\n",curfreq); + dprintk("cpu current frequency is %dkHz.\n", curfreq); /* setup basic struct for cpufreq API */ policy->cpu = 0; @@ -447,7 +469,8 @@ static int __init cpufreq_gx_init(void) struct pci_dev *gx_pci; /* Test if we have the right hardware */ - if ((gx_pci = gx_detect_chipset()) == NULL) + gx_pci = gx_detect_chipset(); + if (gx_pci == NULL) return -ENODEV; /* check whether module parameters are sane */ @@ -468,9 +491,11 @@ static int __init cpufreq_gx_init(void) pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1)); pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2)); pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration)); - pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration)); + pci_read_config_byte(params->cs55x0, PCI_MODOFF, + &(params->off_duration)); - if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { + ret = cpufreq_register_driver(&gx_suspmod_driver); + if (ret) { kfree(params); return ret; /* register error! */ } @@ -485,9 +510,9 @@ static void __exit cpufreq_gx_exit(void) kfree(gx_params); } -MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>"); -MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>"); +MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode"); +MODULE_LICENSE("GPL"); module_init(cpufreq_gx_init); module_exit(cpufreq_gx_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c index a4cff5d..f1c51ae 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -30,12 +30,12 @@ #include <linux/slab.h> #include <linux/string.h> #include <linux/delay.h> +#include <linux/timex.h> +#include <linux/io.h> +#include <linux/acpi.h> +#include <linux/kernel.h> #include <asm/msr.h> -#include <asm/timex.h> -#include <asm/io.h> -#include <asm/acpi.h> -#include <linux/acpi.h> #include <acpi/processor.h> #include "longhaul.h" @@ -58,7 +58,7 @@ #define USE_NORTHBRIDGE (1 << 2) static int cpu_model; -static unsigned int numscales=16; +static unsigned int numscales = 16; static unsigned int fsb; static const struct mV_pos *vrm_mV_table; @@ -67,8 +67,8 @@ static const unsigned char *mV_vrm_table; static unsigned int highest_speed, lowest_speed; /* kHz */ static unsigned int minmult, maxmult; static int can_scale_voltage; -static struct acpi_processor *pr = NULL; -static struct acpi_processor_cx *cx = NULL; +static struct acpi_processor *pr; +static struct acpi_processor_cx *cx; static u32 acpi_regs_addr; static u8 longhaul_flags; static unsigned int longhaul_index; @@ -78,12 +78,13 @@ static int scale_voltage; static int disable_acpi_c3; static int revid_errata; -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "longhaul", msg) /* Clock ratios multiplied by 10 */ -static int clock_ratio[32]; -static int eblcr_table[32]; +static int mults[32]; +static int eblcr[32]; static int longhaul_version; static struct cpufreq_frequency_table *longhaul_table; @@ -93,7 +94,7 @@ static char speedbuffer[8]; static char *print_speed(int speed) { if (speed < 1000) { - snprintf(speedbuffer, sizeof(speedbuffer),"%dMHz", speed); + snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed); return speedbuffer; } @@ -122,27 +123,28 @@ static unsigned int calc_speed(int mult) static int longhaul_get_cpu_mult(void) { - unsigned long invalue=0,lo, hi; + unsigned long invalue = 0, lo, hi; - rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi); - invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22; - if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) { + rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi); + invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22; + if (longhaul_version == TYPE_LONGHAUL_V2 || + longhaul_version == TYPE_POWERSAVER) { if (lo & (1<<27)) - invalue+=16; + invalue += 16; } - return eblcr_table[invalue]; + return eblcr[invalue]; } /* For processor with BCR2 MSR */ -static void do_longhaul1(unsigned int clock_ratio_index) +static void do_longhaul1(unsigned int mults_index) { union msr_bcr2 bcr2; rdmsrl(MSR_VIA_BCR2, bcr2.val); /* Enable software clock multiplier */ bcr2.bits.ESOFTBF = 1; - bcr2.bits.CLOCKMUL = clock_ratio_index & 0xff; + bcr2.bits.CLOCKMUL = mults_index & 0xff; /* Sync to timer tick */ safe_halt(); @@ -161,7 +163,7 @@ static void do_longhaul1(unsigned int clock_ratio_index) /* For processor with Longhaul MSR */ -static void do_powersaver(int cx_address, unsigned int clock_ratio_index, +static void do_powersaver(int cx_address, unsigned int mults_index, unsigned int dir) { union msr_longhaul longhaul; @@ -173,11 +175,11 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index, longhaul.bits.RevisionKey = longhaul.bits.RevisionID; else longhaul.bits.RevisionKey = 0; - longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf; - longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4; + longhaul.bits.SoftBusRatio = mults_index & 0xf; + longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4; /* Setup new voltage */ if (can_scale_voltage) - longhaul.bits.SoftVID = (clock_ratio_index >> 8) & 0x1f; + longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f; /* Sync to timer tick */ safe_halt(); /* Raise voltage if necessary */ @@ -240,14 +242,14 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index, /** * longhaul_set_cpu_frequency() - * @clock_ratio_index : bitpattern of the new multiplier. + * @mults_index : bitpattern of the new multiplier. * * Sets a new clock ratio. */ static void longhaul_setstate(unsigned int table_index) { - unsigned int clock_ratio_index; + unsigned int mults_index; int speed, mult; struct cpufreq_freqs freqs; unsigned long flags; @@ -256,9 +258,9 @@ static void longhaul_setstate(unsigned int table_index) u32 bm_timeout = 1000; unsigned int dir = 0; - clock_ratio_index = longhaul_table[table_index].index; + mults_index = longhaul_table[table_index].index; /* Safety precautions */ - mult = clock_ratio[clock_ratio_index & 0x1f]; + mult = mults[mults_index & 0x1f]; if (mult == -1) return; speed = calc_speed(mult); @@ -274,7 +276,7 @@ static void longhaul_setstate(unsigned int table_index) cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", + dprintk("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n", fsb, mult/10, mult%10, print_speed(speed/1000)); retry_loop: preempt_disable(); @@ -282,8 +284,8 @@ retry_loop: pic2_mask = inb(0xA1); pic1_mask = inb(0x21); /* works on C3. save mask. */ - outb(0xFF,0xA1); /* Overkill */ - outb(0xFE,0x21); /* TMR0 only */ + outb(0xFF, 0xA1); /* Overkill */ + outb(0xFE, 0x21); /* TMR0 only */ /* Wait while PCI bus is busy. */ if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE @@ -312,7 +314,7 @@ retry_loop: * Software controlled multipliers only. */ case TYPE_LONGHAUL_V1: - do_longhaul1(clock_ratio_index); + do_longhaul1(mults_index); break; /* @@ -327,9 +329,9 @@ retry_loop: if (longhaul_flags & USE_ACPI_C3) { /* Don't allow wakeup */ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0); - do_powersaver(cx->address, clock_ratio_index, dir); + do_powersaver(cx->address, mults_index, dir); } else { - do_powersaver(0, clock_ratio_index, dir); + do_powersaver(0, mults_index, dir); } break; } @@ -341,8 +343,8 @@ retry_loop: /* Enable bus master arbitration */ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0); } - outb(pic2_mask,0xA1); /* restore mask */ - outb(pic1_mask,0x21); + outb(pic2_mask, 0xA1); /* restore mask */ + outb(pic1_mask, 0x21); local_irq_restore(flags); preempt_enable(); @@ -392,7 +394,8 @@ retry_loop: cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); if (!bm_timeout) - printk(KERN_INFO PFX "Warning: Timeout while waiting for idle PCI bus.\n"); + printk(KERN_INFO PFX "Warning: Timeout while waiting for " + "idle PCI bus.\n"); } /* @@ -458,31 +461,32 @@ static int __init longhaul_get_ranges(void) break; } - dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n", + dprintk("MinMult:%d.%dx MaxMult:%d.%dx\n", minmult/10, minmult%10, maxmult/10, maxmult%10); highest_speed = calc_speed(maxmult); lowest_speed = calc_speed(minmult); - dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, + dprintk("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb, print_speed(lowest_speed/1000), print_speed(highest_speed/1000)); if (lowest_speed == highest_speed) { - printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n"); + printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n"); return -EINVAL; } if (lowest_speed > highest_speed) { - printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", + printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n", lowest_speed, highest_speed); return -EINVAL; } - longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL); - if(!longhaul_table) + longhaul_table = kmalloc((numscales + 1) * sizeof(*longhaul_table), + GFP_KERNEL); + if (!longhaul_table) return -ENOMEM; for (j = 0; j < numscales; j++) { - ratio = clock_ratio[j]; + ratio = mults[j]; if (ratio == -1) continue; if (ratio > maxmult || ratio < minmult) @@ -507,13 +511,10 @@ static int __init longhaul_get_ranges(void) } } if (min_i != j) { - unsigned int temp; - temp = longhaul_table[j].frequency; - longhaul_table[j].frequency = longhaul_table[min_i].frequency; - longhaul_table[min_i].frequency = temp; - temp = longhaul_table[j].index; - longhaul_table[j].index = longhaul_table[min_i].index; - longhaul_table[min_i].index = temp; + swap(longhaul_table[j].frequency, + longhaul_table[min_i].frequency); + swap(longhaul_table[j].index, + longhaul_table[min_i].index); } } @@ -521,7 +522,7 @@ static int __init longhaul_get_ranges(void) /* Find index we are running on */ for (j = 0; j < k; j++) { - if (clock_ratio[longhaul_table[j].index & 0x1f] == mult) { + if (mults[longhaul_table[j].index & 0x1f] == mult) { longhaul_index = j; break; } @@ -559,20 +560,22 @@ static void __init longhaul_setup_voltagescaling(void) maxvid = vrm_mV_table[longhaul.bits.MaximumVID]; if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) { - printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " + printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. " "Voltage scaling disabled.\n", - minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000); + minvid.mV/1000, minvid.mV%1000, + maxvid.mV/1000, maxvid.mV%1000); return; } if (minvid.mV == maxvid.mV) { - printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are " - "both %d.%03d. Voltage scaling disabled\n", + printk(KERN_INFO PFX "Claims to support voltage scaling but " + "min & max are both %d.%03d. " + "Voltage scaling disabled\n", maxvid.mV/1000, maxvid.mV%1000); return; } - /* How many voltage steps */ + /* How many voltage steps*/ numvscales = maxvid.pos - minvid.pos + 1; printk(KERN_INFO PFX "Max VID=%d.%03d " @@ -586,7 +589,7 @@ static void __init longhaul_setup_voltagescaling(void) j = longhaul.bits.MinMHzBR; if (longhaul.bits.MinMHzBR4) j += 16; - min_vid_speed = eblcr_table[j]; + min_vid_speed = eblcr[j]; if (min_vid_speed == -1) return; switch (longhaul.bits.MinMHzFSB) { @@ -617,7 +620,8 @@ static void __init longhaul_setup_voltagescaling(void) pos = minvid.pos; longhaul_table[j].index |= mV_vrm_table[pos] << 8; vid = vrm_mV_table[mV_vrm_table[pos]]; - printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV); + printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", + speed, j, vid.mV); j++; } @@ -640,7 +644,8 @@ static int longhaul_target(struct cpufreq_policy *policy, unsigned int dir = 0; u8 vid, current_vid; - if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index)) + if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, + relation, &table_index)) return -EINVAL; /* Don't set same frequency again */ @@ -656,7 +661,8 @@ static int longhaul_target(struct cpufreq_policy *policy, * this in hardware, C3 is old and we need to do this * in software. */ i = longhaul_index; - current_vid = (longhaul_table[longhaul_index].index >> 8) & 0x1f; + current_vid = (longhaul_table[longhaul_index].index >> 8); + current_vid &= 0x1f; if (table_index > longhaul_index) dir = 1; while (i != table_index) { @@ -691,9 +697,9 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle, { struct acpi_device *d; - if ( acpi_bus_get_device(obj_handle, &d) ) { + if (acpi_bus_get_device(obj_handle, &d)) return 0; - } + *return_value = acpi_driver_data(d); return 1; } @@ -750,7 +756,7 @@ static int longhaul_setup_southbridge(void) /* Find VT8235 southbridge */ dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL); if (dev == NULL) - /* Find VT8237 southbridge */ + /* Find VT8237 southbridge */ dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, NULL); if (dev != NULL) { @@ -769,7 +775,8 @@ static int longhaul_setup_southbridge(void) if (pci_cmd & 1 << 7) { pci_read_config_dword(dev, 0x88, &acpi_regs_addr); acpi_regs_addr &= 0xff00; - printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", acpi_regs_addr); + printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", + acpi_regs_addr); } pci_dev_put(dev); @@ -781,7 +788,7 @@ static int longhaul_setup_southbridge(void) static int __init longhaul_cpu_init(struct cpufreq_policy *policy) { struct cpuinfo_x86 *c = &cpu_data(0); - char *cpuname=NULL; + char *cpuname = NULL; int ret; u32 lo, hi; @@ -791,8 +798,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpu_model = CPU_SAMUEL; cpuname = "C3 'Samuel' [C5A]"; longhaul_version = TYPE_LONGHAUL_V1; - memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio)); - memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr)); + memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); + memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr)); break; case 7: @@ -803,10 +810,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpuname = "C3 'Samuel 2' [C5B]"; /* Note, this is not a typo, early Samuel2's had * Samuel1 ratios. */ - memcpy(clock_ratio, samuel1_clock_ratio, - sizeof(samuel1_clock_ratio)); - memcpy(eblcr_table, samuel2_eblcr, - sizeof(samuel2_eblcr)); + memcpy(mults, samuel1_mults, sizeof(samuel1_mults)); + memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr)); break; case 1 ... 15: longhaul_version = TYPE_LONGHAUL_V1; @@ -817,10 +822,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpu_model = CPU_EZRA; cpuname = "C3 'Ezra' [C5C]"; } - memcpy(clock_ratio, ezra_clock_ratio, - sizeof(ezra_clock_ratio)); - memcpy(eblcr_table, ezra_eblcr, - sizeof(ezra_eblcr)); + memcpy(mults, ezra_mults, sizeof(ezra_mults)); + memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr)); break; } break; @@ -829,18 +832,16 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) cpu_model = CPU_EZRA_T; cpuname = "C3 'Ezra-T' [C5M]"; longhaul_version = TYPE_POWERSAVER; - numscales=32; - memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio)); - memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr)); + numscales = 32; + memcpy(mults, ezrat_mults, sizeof(ezrat_mults)); + memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr)); break; case 9: longhaul_version = TYPE_POWERSAVER; numscales = 32; - memcpy(clock_ratio, - nehemiah_clock_ratio, - sizeof(nehemiah_clock_ratio)); - memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr)); + memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults)); + memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr)); switch (c->x86_mask) { case 0 ... 1: cpu_model = CPU_NEHEMIAH; @@ -869,14 +870,14 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) longhaul_version = TYPE_LONGHAUL_V1; } - printk (KERN_INFO PFX "VIA %s CPU detected. ", cpuname); + printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname); switch (longhaul_version) { case TYPE_LONGHAUL_V1: case TYPE_LONGHAUL_V2: - printk ("Longhaul v%d supported.\n", longhaul_version); + printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version); break; case TYPE_POWERSAVER: - printk ("Powersaver supported.\n"); + printk(KERN_CONT "Powersaver supported.\n"); break; }; @@ -940,7 +941,7 @@ static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy) return 0; } -static struct freq_attr* longhaul_attr[] = { +static struct freq_attr *longhaul_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -966,13 +967,15 @@ static int __init longhaul_init(void) #ifdef CONFIG_SMP if (num_online_cpus() > 1) { - printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n"); + printk(KERN_ERR PFX "More than 1 CPU detected, " + "longhaul disabled.\n"); return -ENODEV; } #endif #ifdef CONFIG_X86_IO_APIC if (cpu_has_apic) { - printk(KERN_ERR PFX "APIC detected. Longhaul is currently broken in this configuration.\n"); + printk(KERN_ERR PFX "APIC detected. Longhaul is currently " + "broken in this configuration.\n"); return -ENODEV; } #endif @@ -993,8 +996,8 @@ static void __exit longhaul_exit(void) { int i; - for (i=0; i < numscales; i++) { - if (clock_ratio[i] == maxmult) { + for (i = 0; i < numscales; i++) { + if (mults[i] == maxmult) { longhaul_setstate(i); break; } @@ -1007,11 +1010,11 @@ static void __exit longhaul_exit(void) /* Even if BIOS is exporting ACPI C3 state, and it is used * with success when CPU is idle, this state doesn't * trigger frequency transition in some cases. */ -module_param (disable_acpi_c3, int, 0644); +module_param(disable_acpi_c3, int, 0644); MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support"); /* Change CPU voltage with frequency. Very usefull to save * power, but most VIA C3 processors aren't supporting it. */ -module_param (scale_voltage, int, 0644); +module_param(scale_voltage, int, 0644); MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); /* Force revision key to 0 for processors which doesn't * support voltage scaling, but are introducing itself as @@ -1019,9 +1022,9 @@ MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor"); module_param(revid_errata, int, 0644); MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID"); -MODULE_AUTHOR ("Dave Jones <davej@redhat.com>"); -MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dave Jones <davej@redhat.com>"); +MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors."); +MODULE_LICENSE("GPL"); late_initcall(longhaul_init); module_exit(longhaul_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/arch/x86/kernel/cpu/cpufreq/longhaul.h index 4fcc320..e2360a4 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.h +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.h @@ -49,14 +49,14 @@ union msr_longhaul { /* * Clock ratio tables. Div/Mod by 10 to get ratio. - * The eblcr ones specify the ratio read from the CPU. - * The clock_ratio ones specify what to write to the CPU. + * The eblcr values specify the ratio read from the CPU. + * The mults values specify what to write to the CPU. */ /* * VIA C3 Samuel 1 & Samuel 2 (stepping 0) */ -static const int __initdata samuel1_clock_ratio[16] = { +static const int __initdata samuel1_mults[16] = { -1, /* 0000 -> RESERVED */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -119,7 +119,7 @@ static const int __initdata samuel2_eblcr[16] = { /* * VIA C3 Ezra */ -static const int __initdata ezra_clock_ratio[16] = { +static const int __initdata ezra_mults[16] = { 100, /* 0000 -> 10.0x */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -160,7 +160,7 @@ static const int __initdata ezra_eblcr[16] = { /* * VIA C3 (Ezra-T) [C5M]. */ -static const int __initdata ezrat_clock_ratio[32] = { +static const int __initdata ezrat_mults[32] = { 100, /* 0000 -> 10.0x */ 30, /* 0001 -> 3.0x */ 40, /* 0010 -> 4.0x */ @@ -235,7 +235,7 @@ static const int __initdata ezrat_eblcr[32] = { /* * VIA C3 Nehemiah */ -static const int __initdata nehemiah_clock_ratio[32] = { +static const int __initdata nehemiah_mults[32] = { 100, /* 0000 -> 10.0x */ -1, /* 0001 -> 16.0x */ 40, /* 0010 -> 4.0x */ diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c index 777a7ff..da5f70f 100644 --- a/arch/x86/kernel/cpu/cpufreq/longrun.c +++ b/arch/x86/kernel/cpu/cpufreq/longrun.c @@ -11,12 +11,13 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/cpufreq.h> +#include <linux/timex.h> #include <asm/msr.h> #include <asm/processor.h> -#include <asm/timex.h> -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longrun", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "longrun", msg) static struct cpufreq_driver longrun_driver; @@ -51,7 +52,7 @@ static void __init longrun_get_policy(struct cpufreq_policy *policy) msr_lo &= 0x0000007F; msr_hi &= 0x0000007F; - if ( longrun_high_freq <= longrun_low_freq ) { + if (longrun_high_freq <= longrun_low_freq) { /* Assume degenerate Longrun table */ policy->min = policy->max = longrun_high_freq; } else { @@ -79,7 +80,7 @@ static int longrun_set_policy(struct cpufreq_policy *policy) if (!policy) return -EINVAL; - if ( longrun_high_freq <= longrun_low_freq ) { + if (longrun_high_freq <= longrun_low_freq) { /* Assume degenerate Longrun table */ pctg_lo = pctg_hi = 100; } else { @@ -152,7 +153,7 @@ static unsigned int longrun_get(unsigned int cpu) cpuid(0x80860007, &eax, &ebx, &ecx, &edx); dprintk("cpuid eax is %u\n", eax); - return (eax * 1000); + return eax * 1000; } /** @@ -196,7 +197,8 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi); *high_freq = msr_lo * 1000; /* to kHz */ - dprintk("longrun table interface told %u - %u kHz\n", *low_freq, *high_freq); + dprintk("longrun table interface told %u - %u kHz\n", + *low_freq, *high_freq); if (*low_freq > *high_freq) *low_freq = *high_freq; @@ -219,7 +221,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, cpuid(0x80860007, &eax, &ebx, &ecx, &edx); /* try decreasing in 10% steps, some processors react only * on some barrier values */ - for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -=10) { + for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) { /* set to 0 to try_hi perf_pctg */ msr_lo &= 0xFFFFFF80; msr_hi &= 0xFFFFFF80; @@ -236,7 +238,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, /* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq) * eqals - * low_freq * ( 1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) + * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg) * * high_freq * perf_pctg is stored tempoarily into "ebx". */ @@ -317,9 +319,10 @@ static void __exit longrun_exit(void) } -MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION ("LongRun driver for Transmeta Crusoe and Efficeon processors."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and " + "Efficeon processors."); +MODULE_LICENSE("GPL"); module_init(longrun_init); module_exit(longrun_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index 3178c3a..41ed949 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -27,15 +27,17 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/cpumask.h> +#include <linux/timex.h> #include <asm/processor.h> #include <asm/msr.h> -#include <asm/timex.h> +#include <asm/timer.h> #include "speedstep-lib.h" #define PFX "p4-clockmod: " -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "p4-clockmod", msg) /* * Duty Cycle (3bits), note DC_DISABLE is not specified in @@ -58,7 +60,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) { u32 l, h; - if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV)) + if (!cpu_online(cpu) || + (newstate > DC_DISABLE) || (newstate == DC_RESV)) return -EINVAL; rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h); @@ -66,7 +69,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate) if (l & 0x01) dprintk("CPU#%d currently thermal throttled\n", cpu); - if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT)) + if (has_N44_O17_errata[cpu] && + (newstate == DC_25PT || newstate == DC_DFLT)) newstate = DC_38PT; rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h); @@ -112,7 +116,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, struct cpufreq_freqs freqs; int i; - if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], + target_freq, relation, &newstate)) return -EINVAL; freqs.old = cpufreq_p4_get(policy->cpu); @@ -127,7 +132,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy, cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); } - /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software + /* run on each logical CPU, + * see section 13.15.3 of IA32 Intel Architecture Software * Developer's Manual, Volume 3 */ for_each_cpu(i, policy->cpus) @@ -153,28 +159,30 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) { if (c->x86 == 0x06) { if (cpu_has(c, X86_FEATURE_EST)) - printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. " - "The acpi-cpufreq module offers voltage scaling" - " in addition of frequency scaling. You should use " - "that instead of p4-clockmod, if possible.\n"); + printk(KERN_WARNING PFX "Warning: EST-capable CPU " + "detected. The acpi-cpufreq module offers " + "voltage scaling in addition of frequency " + "scaling. You should use that instead of " + "p4-clockmod, if possible.\n"); switch (c->x86_model) { case 0x0E: /* Core */ case 0x0F: /* Core Duo */ case 0x16: /* Celeron Core */ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE); + return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); case 0x0D: /* Pentium M (Dothan) */ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; /* fall through */ case 0x09: /* Pentium M (Banias) */ - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM); + return speedstep_get_frequency(SPEEDSTEP_CPU_PM); } } if (c->x86 != 0xF) { if (!cpu_has(c, X86_FEATURE_EST)) - printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. " - "Please send an e-mail to <cpufreq@vger.kernel.org>\n"); + printk(KERN_WARNING PFX "Unknown CPU. " + "Please send an e-mail to " + "<cpufreq@vger.kernel.org>\n"); return 0; } @@ -182,16 +190,16 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) * throttling is active or not. */ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; - if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) { + if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) { printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. " "The speedstep-ich or acpi cpufreq modules offer " "voltage scaling in addition of frequency scaling. " "You should use either one instead of p4-clockmod, " "if possible.\n"); - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M); + return speedstep_get_frequency(SPEEDSTEP_CPU_P4M); } - return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D); + return speedstep_get_frequency(SPEEDSTEP_CPU_P4D); } @@ -217,14 +225,20 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) dprintk("has errata -- disabling low frequencies\n"); } + if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D && + c->x86_model < 2) { + /* switch to maximum frequency and measure result */ + cpufreq_p4_setdc(policy->cpu, DC_DISABLE); + recalibrate_cpu_khz(); + } /* get max frequency */ stock_freq = cpufreq_p4_get_frequency(c); if (!stock_freq) return -EINVAL; /* table init */ - for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { - if ((i<2) && (has_N44_O17_errata[policy->cpu])) + for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) { + if ((i < 2) && (has_N44_O17_errata[policy->cpu])) p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID; else p4clockmod_table[i].frequency = (stock_freq * i)/8; @@ -232,7 +246,10 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy) cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu); /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 1000000; /* assumed */ + + /* the transition latency is set to be 1 higher than the maximum + * transition latency of the ondemand governor */ + policy->cpuinfo.transition_latency = 10000001; policy->cur = stock_freq; return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]); @@ -258,12 +275,12 @@ static unsigned int cpufreq_p4_get(unsigned int cpu) l = DC_DISABLE; if (l != DC_DISABLE) - return (stock_freq * l / 8); + return stock_freq * l / 8; return stock_freq; } -static struct freq_attr* p4clockmod_attr[] = { +static struct freq_attr *p4clockmod_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -298,9 +315,10 @@ static int __init cpufreq_p4_init(void) ret = cpufreq_register_driver(&p4clockmod_driver); if (!ret) - printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n"); + printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock " + "Modulation available\n"); - return (ret); + return ret; } @@ -310,9 +328,9 @@ static void __exit cpufreq_p4_exit(void) } -MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>"); -MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>"); +MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)"); +MODULE_LICENSE("GPL"); late_initcall(cpufreq_p4_init); module_exit(cpufreq_p4_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c index c1ac579..f10dea4 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c @@ -1,6 +1,7 @@ /* * This file was based upon code in Powertweak Linux (http://powertweak.sf.net) - * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski. + * (C) 2000-2003 Dave Jones, Arjan van de Ven, Janne Pänkälä, + * Dominik Brodowski. * * Licensed under the terms of the GNU GPL License version 2. * @@ -13,14 +14,15 @@ #include <linux/cpufreq.h> #include <linux/ioport.h> #include <linux/slab.h> - -#include <asm/msr.h> #include <linux/timex.h> #include <linux/io.h> +#include <asm/msr.h> + #define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long as it is unused */ +#define PFX "powernow-k6: " static unsigned int busfreq; /* FSB, in 10 kHz */ static unsigned int max_multiplier; @@ -47,8 +49,8 @@ static struct cpufreq_frequency_table clock_ratio[] = { */ static int powernow_k6_get_cpu_multiplier(void) { - u64 invalue = 0; - u32 msrval; + u64 invalue = 0; + u32 msrval; msrval = POWERNOW_IOPORT + 0x1; wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ @@ -68,12 +70,12 @@ static int powernow_k6_get_cpu_multiplier(void) */ static void powernow_k6_set_state(unsigned int best_i) { - unsigned long outvalue = 0, invalue = 0; - unsigned long msrval; - struct cpufreq_freqs freqs; + unsigned long outvalue = 0, invalue = 0; + unsigned long msrval; + struct cpufreq_freqs freqs; if (clock_ratio[best_i].index > max_multiplier) { - printk(KERN_ERR "cpufreq: invalid target frequency\n"); + printk(KERN_ERR PFX "invalid target frequency\n"); return; } @@ -119,7 +121,8 @@ static int powernow_k6_verify(struct cpufreq_policy *policy) * powernow_k6_setpolicy - sets a new CPUFreq policy * @policy: new policy * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @relation: how that frequency relates to achieved frequency + * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) * * sets a new CPUFreq policy */ @@ -127,9 +130,10 @@ static int powernow_k6_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { - unsigned int newstate = 0; + unsigned int newstate = 0; - if (cpufreq_frequency_table_target(policy, &clock_ratio[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &clock_ratio[0], + target_freq, relation, &newstate)) return -EINVAL; powernow_k6_set_state(newstate); @@ -140,7 +144,7 @@ static int powernow_k6_target(struct cpufreq_policy *policy, static int powernow_k6_cpu_init(struct cpufreq_policy *policy) { - unsigned int i; + unsigned int i, f; int result; if (policy->cpu != 0) @@ -152,10 +156,11 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) /* table init */ for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { - if (clock_ratio[i].index > max_multiplier) + f = clock_ratio[i].index; + if (f > max_multiplier) clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; else - clock_ratio[i].frequency = busfreq * clock_ratio[i].index; + clock_ratio[i].frequency = busfreq * f; } /* cpuinfo and default policy values */ @@ -185,7 +190,9 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) static unsigned int powernow_k6_get(unsigned int cpu) { - return busfreq * powernow_k6_get_cpu_multiplier(); + unsigned int ret; + ret = (busfreq * powernow_k6_get_cpu_multiplier()); + return ret; } static struct freq_attr *powernow_k6_attr[] = { @@ -221,7 +228,7 @@ static int __init powernow_k6_init(void) return -ENODEV; if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) { - printk("cpufreq: PowerNow IOPORT region already used.\n"); + printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n"); return -EIO; } @@ -246,7 +253,8 @@ static void __exit powernow_k6_exit(void) } -MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, Dominik Brodowski <linux@brodo.de>"); +MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, " + "Dominik Brodowski <linux@brodo.de>"); MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c index 1b446d7..3c28ccd 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c @@ -6,10 +6,12 @@ * Licensed under the terms of the GNU GPL License version 2. * Based upon datasheets & sample CPUs kindly provided by AMD. * - * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt. - * - We cli/sti on stepping A0 CPUs around the FID/VID transition. - * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect. - * - We disable half multipliers if ACPI is used on A0 stepping CPUs. + * Errata 5: + * CPU may fail to execute a FID/VID change in presence of interrupt. + * - We cli/sti on stepping A0 CPUs around the FID/VID transition. + * Errata 15: + * CPU with half frequency multipliers may hang upon wakeup from disconnect. + * - We disable half multipliers if ACPI is used on A0 stepping CPUs. */ #include <linux/kernel.h> @@ -20,11 +22,11 @@ #include <linux/slab.h> #include <linux/string.h> #include <linux/dmi.h> +#include <linux/timex.h> +#include <linux/io.h> +#include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */ #include <asm/msr.h> -#include <asm/timer.h> -#include <asm/timex.h> -#include <asm/io.h> #include <asm/system.h> #ifdef CONFIG_X86_POWERNOW_K7_ACPI @@ -58,9 +60,9 @@ struct pst_s { union powernow_acpi_control_t { struct { unsigned long fid:5, - vid:5, - sgtc:20, - res1:2; + vid:5, + sgtc:20, + res1:2; } bits; unsigned long val; }; @@ -94,14 +96,15 @@ static struct cpufreq_frequency_table *powernow_table; static unsigned int can_scale_bus; static unsigned int can_scale_vid; -static unsigned int minimum_speed=-1; +static unsigned int minimum_speed = -1; static unsigned int maximum_speed; static unsigned int number_scales; static unsigned int fsb; static unsigned int latency; static char have_a0; -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "powernow-k7", msg) static int check_fsb(unsigned int fsbspeed) { @@ -109,7 +112,7 @@ static int check_fsb(unsigned int fsbspeed) unsigned int f = fsb / 1000; delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed; - return (delta < 5); + return delta < 5; } static int check_powernow(void) @@ -117,24 +120,26 @@ static int check_powernow(void) struct cpuinfo_x86 *c = &cpu_data(0); unsigned int maxei, eax, ebx, ecx, edx; - if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) { + if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) { #ifdef MODULE - printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n"); + printk(KERN_INFO PFX "This module only works with " + "AMD K7 CPUs\n"); #endif return 0; } /* Get maximum capabilities */ - maxei = cpuid_eax (0x80000000); + maxei = cpuid_eax(0x80000000); if (maxei < 0x80000007) { /* Any powernow info ? */ #ifdef MODULE - printk (KERN_INFO PFX "No powernow capabilities detected\n"); + printk(KERN_INFO PFX "No powernow capabilities detected\n"); #endif return 0; } if ((c->x86_model == 6) && (c->x86_mask == 0)) { - printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n"); + printk(KERN_INFO PFX "K7 660[A0] core detected, " + "enabling errata workarounds\n"); have_a0 = 1; } @@ -144,37 +149,42 @@ static int check_powernow(void) if (!(edx & (1 << 1 | 1 << 2))) return 0; - printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); + printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: "); if (edx & 1 << 1) { - printk ("frequency"); - can_scale_bus=1; + printk("frequency"); + can_scale_bus = 1; } if ((edx & (1 << 1 | 1 << 2)) == 0x6) - printk (" and "); + printk(" and "); if (edx & 1 << 2) { - printk ("voltage"); - can_scale_vid=1; + printk("voltage"); + can_scale_vid = 1; } - printk (".\n"); + printk(".\n"); return 1; } +static void invalidate_entry(unsigned int entry) +{ + powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; +} -static int get_ranges (unsigned char *pst) +static int get_ranges(unsigned char *pst) { unsigned int j; unsigned int speed; u8 fid, vid; - powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL); + powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * + (number_scales + 1)), GFP_KERNEL); if (!powernow_table) return -ENOMEM; - for (j=0 ; j < number_scales; j++) { + for (j = 0 ; j < number_scales; j++) { fid = *pst++; powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; @@ -182,10 +192,10 @@ static int get_ranges (unsigned char *pst) speed = powernow_table[j].frequency; - if ((fid_codes[fid] % 10)==5) { + if ((fid_codes[fid] % 10) == 5) { #ifdef CONFIG_X86_POWERNOW_K7_ACPI if (have_a0 == 1) - powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID; + invalidate_entry(j); #endif } @@ -197,7 +207,7 @@ static int get_ranges (unsigned char *pst) vid = *pst++; powernow_table[j].index |= (vid << 8); /* upper 8 bits */ - dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " + dprintk(" FID: 0x%x (%d.%dx [%dMHz]) " "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, fid_codes[fid] % 10, speed/1000, vid, mobile_vid_table[vid]/1000, @@ -214,13 +224,13 @@ static void change_FID(int fid) { union msr_fidvidctl fidvidctl; - rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); if (fidvidctl.bits.FID != fid) { fidvidctl.bits.SGTC = latency; fidvidctl.bits.FID = fid; fidvidctl.bits.VIDC = 0; fidvidctl.bits.FIDC = 1; - wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); } } @@ -229,18 +239,18 @@ static void change_VID(int vid) { union msr_fidvidctl fidvidctl; - rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); if (fidvidctl.bits.VID != vid) { fidvidctl.bits.SGTC = latency; fidvidctl.bits.VID = vid; fidvidctl.bits.FIDC = 0; fidvidctl.bits.VIDC = 1; - wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val); + wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val); } } -static void change_speed (unsigned int index) +static void change_speed(unsigned int index) { u8 fid, vid; struct cpufreq_freqs freqs; @@ -257,7 +267,7 @@ static void change_speed (unsigned int index) freqs.cpu = 0; - rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); cfid = fidvidstatus.bits.CFID; freqs.old = fsb * fid_codes[cfid] / 10; @@ -321,12 +331,14 @@ static int powernow_acpi_init(void) goto err1; } - if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) { + if (acpi_processor_perf->control_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) { retval = -ENODEV; goto err2; } - if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) { + if (acpi_processor_perf->status_register.space_id != + ACPI_ADR_SPACE_FIXED_HARDWARE) { retval = -ENODEV; goto err2; } @@ -338,7 +350,8 @@ static int powernow_acpi_init(void) goto err2; } - powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL); + powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * + (number_scales + 1)), GFP_KERNEL); if (!powernow_table) { retval = -ENOMEM; goto err2; @@ -352,7 +365,7 @@ static int powernow_acpi_init(void) unsigned int speed, speed_mhz; pc.val = (unsigned long) state->control; - dprintk ("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", + dprintk("acpi: P%d: %d MHz %d mW %d uS control %08x SGTC %d\n", i, (u32) state->core_frequency, (u32) state->power, @@ -381,12 +394,12 @@ static int powernow_acpi_init(void) if (speed % 1000 > 0) speed_mhz++; - if ((fid_codes[fid] % 10)==5) { + if ((fid_codes[fid] % 10) == 5) { if (have_a0 == 1) - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + invalidate_entry(i); } - dprintk (" FID: 0x%x (%d.%dx [%dMHz]) " + dprintk(" FID: 0x%x (%d.%dx [%dMHz]) " "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, fid_codes[fid] % 10, speed_mhz, vid, mobile_vid_table[vid]/1000, @@ -422,7 +435,8 @@ err1: err05: kfree(acpi_processor_perf); err0: - printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n"); + printk(KERN_WARNING PFX "ACPI perflib can not be used on " + "this platform\n"); acpi_processor_perf = NULL; return retval; } @@ -435,7 +449,14 @@ static int powernow_acpi_init(void) } #endif -static int powernow_decode_bios (int maxfid, int startvid) +static void print_pst_entry(struct pst_s *pst, unsigned int j) +{ + dprintk("PST:%d (@%p)\n", j, pst); + dprintk(" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", + pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); +} + +static int powernow_decode_bios(int maxfid, int startvid) { struct psb_s *psb; struct pst_s *pst; @@ -446,61 +467,67 @@ static int powernow_decode_bios (int maxfid, int startvid) etuple = cpuid_eax(0x80000001); - for (i=0xC0000; i < 0xffff0 ; i+=16) { + for (i = 0xC0000; i < 0xffff0 ; i += 16) { p = phys_to_virt(i); - if (memcmp(p, "AMDK7PNOW!", 10) == 0){ - dprintk ("Found PSB header at %p\n", p); + if (memcmp(p, "AMDK7PNOW!", 10) == 0) { + dprintk("Found PSB header at %p\n", p); psb = (struct psb_s *) p; - dprintk ("Table version: 0x%x\n", psb->tableversion); + dprintk("Table version: 0x%x\n", psb->tableversion); if (psb->tableversion != 0x12) { - printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n"); + printk(KERN_INFO PFX "Sorry, only v1.2 tables" + " supported right now\n"); return -ENODEV; } - dprintk ("Flags: 0x%x\n", psb->flags); - if ((psb->flags & 1)==0) { - dprintk ("Mobile voltage regulator\n"); - } else { - dprintk ("Desktop voltage regulator\n"); - } + dprintk("Flags: 0x%x\n", psb->flags); + if ((psb->flags & 1) == 0) + dprintk("Mobile voltage regulator\n"); + else + dprintk("Desktop voltage regulator\n"); latency = psb->settlingtime; if (latency < 100) { - printk(KERN_INFO PFX "BIOS set settling time to %d microseconds. " - "Should be at least 100. Correcting.\n", latency); + printk(KERN_INFO PFX "BIOS set settling time " + "to %d microseconds. " + "Should be at least 100. " + "Correcting.\n", latency); latency = 100; } - dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime); - dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst); + dprintk("Settling Time: %d microseconds.\n", + psb->settlingtime); + dprintk("Has %d PST tables. (Only dumping ones " + "relevant to this CPU).\n", + psb->numpst); - p += sizeof (struct psb_s); + p += sizeof(struct psb_s); pst = (struct pst_s *) p; - for (j=0; j<psb->numpst; j++) { + for (j = 0; j < psb->numpst; j++) { pst = (struct pst_s *) p; number_scales = pst->numpstates; - if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) && - (maxfid==pst->maxfid) && (startvid==pst->startvid)) - { - dprintk ("PST:%d (@%p)\n", j, pst); - dprintk (" cpuid: 0x%x fsb: %d maxFID: 0x%x startvid: 0x%x\n", - pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid); - - ret = get_ranges ((char *) pst + sizeof (struct pst_s)); + if ((etuple == pst->cpuid) && + check_fsb(pst->fsbspeed) && + (maxfid == pst->maxfid) && + (startvid == pst->startvid)) { + print_pst_entry(pst, j); + p = (char *)pst + sizeof(struct pst_s); + ret = get_ranges(p); return ret; } else { unsigned int k; - p = (char *) pst + sizeof (struct pst_s); - for (k=0; k<number_scales; k++) - p+=2; + p = (char *)pst + sizeof(struct pst_s); + for (k = 0; k < number_scales; k++) + p += 2; } } - printk (KERN_INFO PFX "No PST tables match this cpuid (0x%x)\n", etuple); - printk (KERN_INFO PFX "This is indicative of a broken BIOS.\n"); + printk(KERN_INFO PFX "No PST tables match this cpuid " + "(0x%x)\n", etuple); + printk(KERN_INFO PFX "This is indicative of a broken " + "BIOS.\n"); return -EINVAL; } @@ -511,13 +538,14 @@ static int powernow_decode_bios (int maxfid, int startvid) } -static int powernow_target (struct cpufreq_policy *policy, +static int powernow_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int newstate; - if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, + relation, &newstate)) return -EINVAL; change_speed(newstate); @@ -526,7 +554,7 @@ static int powernow_target (struct cpufreq_policy *policy, } -static int powernow_verify (struct cpufreq_policy *policy) +static int powernow_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, powernow_table); } @@ -566,18 +594,23 @@ static unsigned int powernow_get(unsigned int cpu) if (cpu) return 0; - rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); cfid = fidvidstatus.bits.CFID; - return (fsb * fid_codes[cfid] / 10); + return fsb * fid_codes[cfid] / 10; } static int __init acer_cpufreq_pst(const struct dmi_system_id *d) { - printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident); - printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n"); - printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n"); + printk(KERN_WARNING PFX + "%s laptop with broken PST tables in BIOS detected.\n", + d->ident); + printk(KERN_WARNING PFX + "You need to downgrade to 3A21 (09/09/2002), or try a newer " + "BIOS than 3A71 (01/20/2003)\n"); + printk(KERN_WARNING PFX + "cpufreq scaling has been disabled as a result of this.\n"); return 0; } @@ -598,7 +631,7 @@ static struct dmi_system_id __initdata powernow_dmi_table[] = { { } }; -static int __init powernow_cpu_init (struct cpufreq_policy *policy) +static int __init powernow_cpu_init(struct cpufreq_policy *policy) { union msr_fidvidstatus fidvidstatus; int result; @@ -606,7 +639,7 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) if (policy->cpu != 0) return -ENODEV; - rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val); + rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); recalibrate_cpu_khz(); @@ -618,19 +651,21 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) dprintk("FSB: %3dMHz\n", fsb/1000); if (dmi_check_system(powernow_dmi_table) || acpi_force) { - printk (KERN_INFO PFX "PSB/PST known to be broken. Trying ACPI instead\n"); + printk(KERN_INFO PFX "PSB/PST known to be broken. " + "Trying ACPI instead\n"); result = powernow_acpi_init(); } else { - result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID); + result = powernow_decode_bios(fidvidstatus.bits.MFID, + fidvidstatus.bits.SVID); if (result) { - printk (KERN_INFO PFX "Trying ACPI perflib\n"); + printk(KERN_INFO PFX "Trying ACPI perflib\n"); maximum_speed = 0; minimum_speed = -1; latency = 0; result = powernow_acpi_init(); if (result) { - printk (KERN_INFO PFX "ACPI and legacy methods failed\n"); - printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.html\n"); + printk(KERN_INFO PFX + "ACPI and legacy methods failed\n"); } } else { /* SGTC use the bus clock as timer */ @@ -642,10 +677,11 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) if (result) return result; - printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", + printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n", minimum_speed/1000, maximum_speed/1000); - policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency); + policy->cpuinfo.transition_latency = + cpufreq_scale(2000000UL, fsb, latency); policy->cur = powernow_get(0); @@ -654,7 +690,8 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy) return cpufreq_frequency_table_cpuinfo(policy, powernow_table); } -static int powernow_cpu_exit (struct cpufreq_policy *policy) { +static int powernow_cpu_exit(struct cpufreq_policy *policy) +{ cpufreq_frequency_table_put_attr(policy->cpu); #ifdef CONFIG_X86_POWERNOW_K7_ACPI @@ -669,7 +706,7 @@ static int powernow_cpu_exit (struct cpufreq_policy *policy) { return 0; } -static struct freq_attr* powernow_table_attr[] = { +static struct freq_attr *powernow_table_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -685,15 +722,15 @@ static struct cpufreq_driver powernow_driver = { .attr = powernow_table_attr, }; -static int __init powernow_init (void) +static int __init powernow_init(void) { - if (check_powernow()==0) + if (check_powernow() == 0) return -ENODEV; return cpufreq_register_driver(&powernow_driver); } -static void __exit powernow_exit (void) +static void __exit powernow_exit(void) { cpufreq_unregister_driver(&powernow_driver); } @@ -701,9 +738,9 @@ static void __exit powernow_exit (void) module_param(acpi_force, int, 0444); MODULE_PARM_DESC(acpi_force, "Force ACPI to be used."); -MODULE_AUTHOR ("Dave Jones <davej@redhat.com>"); -MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dave Jones <davej@redhat.com>"); +MODULE_DESCRIPTION("Powernow driver for AMD K7 processors."); +MODULE_LICENSE("GPL"); late_initcall(powernow_init); module_exit(powernow_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 6428aa1..a15ac94 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -33,16 +33,14 @@ #include <linux/string.h> #include <linux/cpumask.h> #include <linux/sched.h> /* for current / set_cpus_allowed() */ +#include <linux/io.h> +#include <linux/delay.h> #include <asm/msr.h> -#include <asm/io.h> -#include <asm/delay.h> -#ifdef CONFIG_X86_POWERNOW_K8_ACPI #include <linux/acpi.h> #include <linux/mutex.h> #include <acpi/processor.h> -#endif #define PFX "powernow-k8: " #define VERSION "version 2.20.00" @@ -71,7 +69,8 @@ static u32 find_khz_freq_from_fid(u32 fid) return 1000 * find_freq_from_fid(fid); } -static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 pstate) +static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, + u32 pstate) { return data[pstate].frequency; } @@ -186,7 +185,9 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid) return 1; } - lo = fid | (data->currvid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID; + lo = fid; + lo |= (data->currvid << MSR_C_LO_VID_SHIFT); + lo |= MSR_C_LO_INIT_FID_VID; dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n", fid, lo, data->plllock * PLL_LOCK_CONVERSION); @@ -194,7 +195,9 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid) do { wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION); if (i++ > 100) { - printk(KERN_ERR PFX "Hardware error - pending bit very stuck - no further pstate changes possible\n"); + printk(KERN_ERR PFX + "Hardware error - pending bit very stuck - " + "no further pstate changes possible\n"); return 1; } } while (query_current_values_with_pending_wait(data)); @@ -202,14 +205,16 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid) count_off_irt(data); if (savevid != data->currvid) { - printk(KERN_ERR PFX "vid change on fid trans, old 0x%x, new 0x%x\n", - savevid, data->currvid); + printk(KERN_ERR PFX + "vid change on fid trans, old 0x%x, new 0x%x\n", + savevid, data->currvid); return 1; } if (fid != data->currfid) { - printk(KERN_ERR PFX "fid trans failed, fid 0x%x, curr 0x%x\n", fid, - data->currfid); + printk(KERN_ERR PFX + "fid trans failed, fid 0x%x, curr 0x%x\n", fid, + data->currfid); return 1; } @@ -228,7 +233,9 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid) return 1; } - lo = data->currfid | (vid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID; + lo = data->currfid; + lo |= (vid << MSR_C_LO_VID_SHIFT); + lo |= MSR_C_LO_INIT_FID_VID; dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n", vid, lo, STOP_GRANT_5NS); @@ -236,20 +243,24 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid) do { wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS); if (i++ > 100) { - printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n"); + printk(KERN_ERR PFX "internal error - pending bit " + "very stuck - no further pstate " + "changes possible\n"); return 1; } } while (query_current_values_with_pending_wait(data)); if (savefid != data->currfid) { - printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n", + printk(KERN_ERR PFX "fid changed on vid trans, old " + "0x%x new 0x%x\n", savefid, data->currfid); return 1; } if (vid != data->currvid) { - printk(KERN_ERR PFX "vid trans failed, vid 0x%x, curr 0x%x\n", vid, - data->currvid); + printk(KERN_ERR PFX "vid trans failed, vid 0x%x, " + "curr 0x%x\n", + vid, data->currvid); return 1; } @@ -261,7 +272,8 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid) * Decreasing vid codes represent increasing voltages: * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off. */ -static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step) +static int decrease_vid_code_by_step(struct powernow_k8_data *data, + u32 reqvid, u32 step) { if ((data->currvid - reqvid) > step) reqvid = data->currvid - step; @@ -283,7 +295,8 @@ static int transition_pstate(struct powernow_k8_data *data, u32 pstate) } /* Change Opteron/Athlon64 fid and vid, by the 3 phases. */ -static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid) +static int transition_fid_vid(struct powernow_k8_data *data, + u32 reqfid, u32 reqvid) { if (core_voltage_pre_transition(data, reqvid)) return 1; @@ -298,7 +311,8 @@ static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 req return 1; if ((reqfid != data->currfid) || (reqvid != data->currvid)) { - printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n", + printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, " + "curr 0x%x 0x%x\n", smp_processor_id(), reqfid, reqvid, data->currfid, data->currvid); return 1; @@ -311,13 +325,15 @@ static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 req } /* Phase 1 - core voltage transition ... setup voltage */ -static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid) +static int core_voltage_pre_transition(struct powernow_k8_data *data, + u32 reqvid) { u32 rvosteps = data->rvo; u32 savefid = data->currfid; u32 maxvid, lo; - dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n", + dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, " + "reqvid 0x%x, rvo 0x%x\n", smp_processor_id(), data->currfid, data->currvid, reqvid, data->rvo); @@ -340,7 +356,7 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid } else { dprintk("ph1: changing vid for rvo, req 0x%x\n", data->currvid - 1); - if (decrease_vid_code_by_step(data, data->currvid - 1, 1)) + if (decrease_vid_code_by_step(data, data->currvid-1, 1)) return 1; rvosteps--; } @@ -350,7 +366,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid return 1; if (savefid != data->currfid) { - printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", data->currfid); + printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", + data->currfid); return 1; } @@ -363,20 +380,24 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid /* Phase 2 - core frequency transition */ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) { - u32 vcoreqfid, vcocurrfid, vcofiddiff, fid_interval, savevid = data->currvid; + u32 vcoreqfid, vcocurrfid, vcofiddiff; + u32 fid_interval, savevid = data->currvid; - if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { - printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n", - reqfid, data->currfid); + if ((reqfid < HI_FID_TABLE_BOTTOM) && + (data->currfid < HI_FID_TABLE_BOTTOM)) { + printk(KERN_ERR PFX "ph2: illegal lo-lo transition " + "0x%x 0x%x\n", reqfid, data->currfid); return 1; } if (data->currfid == reqfid) { - printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid); + printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", + data->currfid); return 0; } - dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n", + dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, " + "reqfid 0x%x\n", smp_processor_id(), data->currfid, data->currvid, reqfid); @@ -390,14 +411,14 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) if (reqfid > data->currfid) { if (data->currfid > LO_FID_TABLE_TOP) { - if (write_new_fid(data, data->currfid + fid_interval)) { + if (write_new_fid(data, + data->currfid + fid_interval)) return 1; - } } else { if (write_new_fid - (data, 2 + convert_fid_to_vco_fid(data->currfid))) { + (data, + 2 + convert_fid_to_vco_fid(data->currfid))) return 1; - } } } else { if (write_new_fid(data, data->currfid - fid_interval)) @@ -417,7 +438,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) if (data->currfid != reqfid) { printk(KERN_ERR PFX - "ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n", + "ph2: mismatch, failed fid transition, " + "curr 0x%x, req 0x%x\n", data->currfid, reqfid); return 1; } @@ -435,7 +457,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid) } /* Phase 3 - core voltage transition flow ... jump to the final vid. */ -static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid) +static int core_voltage_post_transition(struct powernow_k8_data *data, + u32 reqvid) { u32 savefid = data->currfid; u32 savereqvid = reqvid; @@ -457,7 +480,8 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi if (data->currvid != reqvid) { printk(KERN_ERR PFX - "ph3: failed vid transition\n, req 0x%x, curr 0x%x", + "ph3: failed vid transition\n, " + "req 0x%x, curr 0x%x", reqvid, data->currvid); return 1; } @@ -508,7 +532,8 @@ static int check_supported_cpu(unsigned int cpu) if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) { if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) || ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) { - printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax); + printk(KERN_INFO PFX + "Processor cpuid %x not supported\n", eax); goto out; } @@ -520,8 +545,10 @@ static int check_supported_cpu(unsigned int cpu) } cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx); - if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) { - printk(KERN_INFO PFX "Power state transitions not supported\n"); + if ((edx & P_STATE_TRANSITION_CAPABLE) + != P_STATE_TRANSITION_CAPABLE) { + printk(KERN_INFO PFX + "Power state transitions not supported\n"); goto out; } } else { /* must be a HW Pstate capable processor */ @@ -539,7 +566,8 @@ out: return rc; } -static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) +static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, + u8 maxvid) { unsigned int j; u8 lastfid = 0xff; @@ -550,12 +578,14 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 j, pst[j].vid); return -EINVAL; } - if (pst[j].vid < data->rvo) { /* vid + rvo >= 0 */ + if (pst[j].vid < data->rvo) { + /* vid + rvo >= 0 */ printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate" " %d\n", j); return -ENODEV; } - if (pst[j].vid < maxvid + data->rvo) { /* vid + rvo >= maxvid */ + if (pst[j].vid < maxvid + data->rvo) { + /* vid + rvo >= maxvid */ printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate" " %d\n", j); return -ENODEV; @@ -579,23 +609,31 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 return -EINVAL; } if (lastfid > LO_FID_TABLE_TOP) - printk(KERN_INFO FW_BUG PFX "first fid not from lo freq table\n"); + printk(KERN_INFO FW_BUG PFX + "first fid not from lo freq table\n"); return 0; } +static void invalidate_entry(struct powernow_k8_data *data, unsigned int entry) +{ + data->powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; +} + static void print_basics(struct powernow_k8_data *data) { int j; for (j = 0; j < data->numps; j++) { - if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) { + if (data->powernow_table[j].frequency != + CPUFREQ_ENTRY_INVALID) { if (cpu_family == CPU_HW_PSTATE) { - printk(KERN_INFO PFX " %d : pstate %d (%d MHz)\n", - j, + printk(KERN_INFO PFX + " %d : pstate %d (%d MHz)\n", j, data->powernow_table[j].index, data->powernow_table[j].frequency/1000); } else { - printk(KERN_INFO PFX " %d : fid 0x%x (%d MHz), vid 0x%x\n", + printk(KERN_INFO PFX + " %d : fid 0x%x (%d MHz), vid 0x%x\n", j, data->powernow_table[j].index & 0xff, data->powernow_table[j].frequency/1000, @@ -604,20 +642,25 @@ static void print_basics(struct powernow_k8_data *data) } } if (data->batps) - printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps); + printk(KERN_INFO PFX "Only %d pstates on battery\n", + data->batps); } -static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) +static int fill_powernow_table(struct powernow_k8_data *data, + struct pst_s *pst, u8 maxvid) { struct cpufreq_frequency_table *powernow_table; unsigned int j; - if (data->batps) { /* use ACPI support to get full speed on mains power */ - printk(KERN_WARNING PFX "Only %d pstates usable (use ACPI driver for full range\n", data->batps); + if (data->batps) { + /* use ACPI support to get full speed on mains power */ + printk(KERN_WARNING PFX + "Only %d pstates usable (use ACPI driver for full " + "range\n", data->batps); data->numps = data->batps; } - for ( j=1; j<data->numps; j++ ) { + for (j = 1; j < data->numps; j++) { if (pst[j-1].fid >= pst[j].fid) { printk(KERN_ERR PFX "PST out of sequence\n"); return -EINVAL; @@ -640,9 +683,11 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, } for (j = 0; j < data->numps; j++) { + int freq; powernow_table[j].index = pst[j].fid; /* lower 8 bits */ powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ - powernow_table[j].frequency = find_khz_freq_from_fid(pst[j].fid); + freq = find_khz_freq_from_fid(pst[j].fid); + powernow_table[j].frequency = freq; } powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; powernow_table[data->numps].index = 0; @@ -658,7 +703,8 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, print_basics(data); for (j = 0; j < data->numps; j++) - if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid)) + if ((pst[j].fid == data->currfid) && + (pst[j].vid == data->currvid)) return 0; dprintk("currfid/vid do not match PST, ignoring\n"); @@ -698,7 +744,8 @@ static int find_psb_table(struct powernow_k8_data *data) } data->vstable = psb->vstable; - dprintk("voltage stabilization time: %d(*20us)\n", data->vstable); + dprintk("voltage stabilization time: %d(*20us)\n", + data->vstable); dprintk("flags2: 0x%x\n", psb->flags2); data->rvo = psb->flags2 & 3; @@ -713,11 +760,12 @@ static int find_psb_table(struct powernow_k8_data *data) dprintk("numpst: 0x%x\n", psb->num_tables); cpst = psb->num_tables; - if ((psb->cpuid == 0x00000fc0) || (psb->cpuid == 0x00000fe0) ){ + if ((psb->cpuid == 0x00000fc0) || + (psb->cpuid == 0x00000fe0)) { thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - if ((thiscpuid == 0x00000fc0) || (thiscpuid == 0x00000fe0) ) { + if ((thiscpuid == 0x00000fc0) || + (thiscpuid == 0x00000fe0)) cpst = 1; - } } if (cpst != 1) { printk(KERN_ERR FW_BUG PFX "numpst must be 1\n"); @@ -732,7 +780,8 @@ static int find_psb_table(struct powernow_k8_data *data) data->numps = psb->numps; dprintk("numpstates: 0x%x\n", data->numps); - return fill_powernow_table(data, (struct pst_s *)(psb+1), maxvid); + return fill_powernow_table(data, + (struct pst_s *)(psb+1), maxvid); } /* * If you see this message, complain to BIOS manufacturer. If @@ -745,28 +794,31 @@ static int find_psb_table(struct powernow_k8_data *data) * BIOS and Kernel Developer's Guide, which is available on * www.amd.com */ - printk(KERN_ERR PFX "BIOS error - no PSB or ACPI _PSS objects\n"); + printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n"); return -ENODEV; } -#ifdef CONFIG_X86_POWERNOW_K8_ACPI -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) +static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, + unsigned int index) { + acpi_integer control; + if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE)) return; - data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK; - data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK; - data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; - data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK; - data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK); - data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK; -} + control = data->acpi_data.states[index].control; data->irt = (control + >> IRT_SHIFT) & IRT_MASK; data->rvo = (control >> + RVO_SHIFT) & RVO_MASK; data->exttype = (control + >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK; + data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; data->vidmvs = 1 + << ((control >> MVS_SHIFT) & MVS_MASK); data->vstable = + (control >> VST_SHIFT) & VST_MASK; } static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { struct cpufreq_frequency_table *powernow_table; int ret_val = -ENODEV; + acpi_integer space_id; if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { dprintk("register performance failed: bad ACPI data\n"); @@ -779,11 +831,12 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) goto err_out; } - if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { + space_id = data->acpi_data.control_register.space_id; + if ((space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || + (space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { dprintk("Invalid control/status registers (%x - %x)\n", data->acpi_data.control_register.space_id, - data->acpi_data.status_register.space_id); + space_id); goto err_out; } @@ -802,7 +855,8 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) if (ret_val) goto err_out_mem; - powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END; + powernow_table[data->acpi_data.state_count].frequency = + CPUFREQ_TABLE_END; powernow_table[data->acpi_data.state_count].index = 0; data->powernow_table = powernow_table; @@ -830,13 +884,15 @@ err_out_mem: err_out: acpi_processor_unregister_performance(&data->acpi_data, data->cpu); - /* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */ + /* data->acpi_data.state_count informs us at ->exit() + * whether ACPI was used */ data->acpi_data.state_count = 0; return ret_val; } -static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) +static int fill_powernow_table_pstate(struct powernow_k8_data *data, + struct cpufreq_frequency_table *powernow_table) { int i; u32 hi = 0, lo = 0; @@ -848,84 +904,101 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpuf index = data->acpi_data.states[i].control & HW_PSTATE_MASK; if (index > data->max_hw_pstate) { - printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index); - printk(KERN_ERR PFX "Please report to BIOS manufacturer\n"); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + printk(KERN_ERR PFX "invalid pstate %d - " + "bad value %d.\n", i, index); + printk(KERN_ERR PFX "Please report to BIOS " + "manufacturer\n"); + invalidate_entry(data, i); continue; } rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi); if (!(hi & HW_PSTATE_VALID_MASK)) { dprintk("invalid pstate %d, ignoring\n", index); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + invalidate_entry(data, i); continue; } powernow_table[i].index = index; - powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000; + powernow_table[i].frequency = + data->acpi_data.states[i].core_frequency * 1000; } return 0; } -static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table) +static int fill_powernow_table_fidvid(struct powernow_k8_data *data, + struct cpufreq_frequency_table *powernow_table) { int i; int cntlofreq = 0; + for (i = 0; i < data->acpi_data.state_count; i++) { u32 fid; u32 vid; + u32 freq, index; + acpi_integer status, control; if (data->exttype) { - fid = data->acpi_data.states[i].status & EXT_FID_MASK; - vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK; + status = data->acpi_data.states[i].status; + fid = status & EXT_FID_MASK; + vid = (status >> VID_SHIFT) & EXT_VID_MASK; } else { - fid = data->acpi_data.states[i].control & FID_MASK; - vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK; + control = data->acpi_data.states[i].control; + fid = control & FID_MASK; + vid = (control >> VID_SHIFT) & VID_MASK; } dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); - powernow_table[i].index = fid; /* lower 8 bits */ - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ - powernow_table[i].frequency = find_khz_freq_from_fid(fid); + index = fid | (vid<<8); + powernow_table[i].index = index; + + freq = find_khz_freq_from_fid(fid); + powernow_table[i].frequency = freq; /* verify frequency is OK */ - if ((powernow_table[i].frequency > (MAX_FREQ * 1000)) || - (powernow_table[i].frequency < (MIN_FREQ * 1000))) { - dprintk("invalid freq %u kHz, ignoring\n", powernow_table[i].frequency); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) { + dprintk("invalid freq %u kHz, ignoring\n", freq); + invalidate_entry(data, i); continue; } - /* verify voltage is OK - BIOSs are using "off" to indicate invalid */ + /* verify voltage is OK - + * BIOSs are using "off" to indicate invalid */ if (vid == VID_OFF) { dprintk("invalid vid %u, ignoring\n", vid); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + invalidate_entry(data, i); continue; } /* verify only 1 entry from the lo frequency table */ if (fid < HI_FID_TABLE_BOTTOM) { if (cntlofreq) { - /* if both entries are the same, ignore this one ... */ - if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) || - (powernow_table[i].index != powernow_table[cntlofreq].index)) { - printk(KERN_ERR PFX "Too many lo freq table entries\n"); + /* if both entries are the same, + * ignore this one ... */ + if ((freq != powernow_table[cntlofreq].frequency) || + (index != powernow_table[cntlofreq].index)) { + printk(KERN_ERR PFX + "Too many lo freq table " + "entries\n"); return 1; } - dprintk("double low frequency table entry, ignoring it.\n"); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + dprintk("double low frequency table entry, " + "ignoring it.\n"); + invalidate_entry(data, i); continue; } else cntlofreq = i; } - if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) { - printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n", - powernow_table[i].frequency, - (unsigned int) (data->acpi_data.states[i].core_frequency * 1000)); - powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID; + if (freq != (data->acpi_data.states[i].core_frequency * 1000)) { + printk(KERN_INFO PFX "invalid freq entries " + "%u kHz vs. %u kHz\n", freq, + (unsigned int) + (data->acpi_data.states[i].core_frequency + * 1000)); + invalidate_entry(data, i); continue; } } @@ -935,7 +1008,8 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpuf static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { if (data->acpi_data.state_count) - acpi_processor_unregister_performance(&data->acpi_data, data->cpu); + acpi_processor_unregister_performance(&data->acpi_data, + data->cpu); free_cpumask_var(data->acpi_data.shared_cpu_map); } @@ -953,15 +1027,9 @@ static int get_transition_latency(struct powernow_k8_data *data) return 1000 * max_latency; } -#else -static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; } -static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; } -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; } -static int get_transition_latency(struct powernow_k8_data *data) { return 0; } -#endif /* CONFIG_X86_POWERNOW_K8_ACPI */ - /* Take a frequency, and issue the fid/vid transition command */ -static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned int index) +static int transition_frequency_fidvid(struct powernow_k8_data *data, + unsigned int index) { u32 fid = 0; u32 vid = 0; @@ -989,7 +1057,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i return 0; } - if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) { + if ((fid < HI_FID_TABLE_BOTTOM) && + (data->currfid < HI_FID_TABLE_BOTTOM)) { printk(KERN_ERR PFX "ignoring illegal change in lo freq table-%x to 0x%x\n", data->currfid, fid); @@ -1017,7 +1086,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i } /* Take a frequency, and issue the hardware pstate transition command */ -static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index) +static int transition_frequency_pstate(struct powernow_k8_data *data, + unsigned int index) { u32 pstate = 0; int res, i; @@ -1029,7 +1099,8 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i pstate = index & HW_PSTATE_MASK; if (pstate > data->max_hw_pstate) return 0; - freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); + freqs.old = find_khz_freq_from_pstate(data->powernow_table, + data->currpstate); freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate); for_each_cpu_mask_nr(i, *(data->available_cores)) { @@ -1048,7 +1119,8 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i } /* Driver entry point to switch to the target frequency */ -static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation) +static int powernowk8_target(struct cpufreq_policy *pol, + unsigned targfreq, unsigned relation) { cpumask_t oldmask; struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); @@ -1087,14 +1159,18 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi dprintk("targ: curr fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); - if ((checkvid != data->currvid) || (checkfid != data->currfid)) { + if ((checkvid != data->currvid) || + (checkfid != data->currfid)) { printk(KERN_INFO PFX - "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n", - checkfid, data->currfid, checkvid, data->currvid); + "error - out of sync, fix 0x%x 0x%x, " + "vid 0x%x 0x%x\n", + checkfid, data->currfid, + checkvid, data->currvid); } } - if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) + if (cpufreq_frequency_table_target(pol, data->powernow_table, + targfreq, relation, &newstate)) goto err_out; mutex_lock(&fidvid_mutex); @@ -1114,7 +1190,8 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi mutex_unlock(&fidvid_mutex); if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, newstate); + pol->cur = find_khz_freq_from_pstate(data->powernow_table, + newstate); else pol->cur = find_khz_freq_from_fid(data->currfid); ret = 0; @@ -1141,6 +1218,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) struct powernow_k8_data *data; cpumask_t oldmask; int rc; + static int print_once; if (!cpu_online(pol->cpu)) return -ENODEV; @@ -1163,33 +1241,31 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) * an UP version, and is deprecated by AMD. */ if (num_online_cpus() != 1) { -#ifndef CONFIG_ACPI_PROCESSOR - printk(KERN_ERR PFX "ACPI Processor support is required " - "for SMP systems but is absent. Please load the " - "ACPI Processor module before starting this " - "driver.\n"); -#else - printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide" - " ACPI _PSS objects in a way that Linux " - "understands. Please report this to the Linux " - "ACPI maintainers and complain to your BIOS " - "vendor.\n"); -#endif - kfree(data); - return -ENODEV; + /* + * Replace this one with print_once as soon as such a + * thing gets introduced + */ + if (!print_once) { + WARN_ONCE(1, KERN_ERR FW_BUG PFX "Your BIOS " + "does not provide ACPI _PSS objects " + "in a way that Linux understands. " + "Please report this to the Linux ACPI" + " maintainers and complain to your " + "BIOS vendor.\n"); + print_once++; + } + goto err_out; } if (pol->cpu != 0) { printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for " "CPU other than CPU0. Complain to your BIOS " "vendor.\n"); - kfree(data); - return -ENODEV; + goto err_out; } rc = find_psb_table(data); - if (rc) { - kfree(data); - return -ENODEV; - } + if (rc) + goto err_out; + /* Take a crude guess here. * That guess was in microseconds, so multiply with 1000 */ pol->cpuinfo.transition_latency = ( @@ -1204,16 +1280,16 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) if (smp_processor_id() != pol->cpu) { printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); - goto err_out; + goto err_out_unmask; } if (pending_bit_stuck()) { printk(KERN_ERR PFX "failing init, change pending bit set\n"); - goto err_out; + goto err_out_unmask; } if (query_current_values_with_pending_wait(data)) - goto err_out; + goto err_out_unmask; if (cpu_family == CPU_OPTERON) fidvid_msr_init(); @@ -1228,7 +1304,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) data->available_cores = pol->cpus; if (cpu_family == CPU_HW_PSTATE) - pol->cur = find_khz_freq_from_pstate(data->powernow_table, data->currpstate); + pol->cur = find_khz_freq_from_pstate(data->powernow_table, + data->currpstate); else pol->cur = find_khz_freq_from_fid(data->currfid); dprintk("policy current frequency %d kHz\n", pol->cur); @@ -1245,7 +1322,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu); if (cpu_family == CPU_HW_PSTATE) - dprintk("cpu_init done, current pstate 0x%x\n", data->currpstate); + dprintk("cpu_init done, current pstate 0x%x\n", + data->currpstate); else dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n", data->currfid, data->currvid); @@ -1254,15 +1332,16 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) return 0; -err_out: +err_out_unmask: set_cpus_allowed_ptr(current, &oldmask); powernow_k8_cpu_exit_acpi(data); +err_out: kfree(data); return -ENODEV; } -static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol) +static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol) { struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); @@ -1279,7 +1358,7 @@ static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol) return 0; } -static unsigned int powernowk8_get (unsigned int cpu) +static unsigned int powernowk8_get(unsigned int cpu) { struct powernow_k8_data *data; cpumask_t oldmask = current->cpus_allowed; @@ -1315,7 +1394,7 @@ out: return khz; } -static struct freq_attr* powernow_k8_attr[] = { +static struct freq_attr *powernow_k8_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -1360,7 +1439,8 @@ static void __exit powernowk8_exit(void) cpufreq_unregister_driver(&cpufreq_amd64_driver); } -MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>"); +MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and " + "Mark Langsdorf <mark.langsdorf@amd.com>"); MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver."); MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index 8ecc75b..6c6698f 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -45,11 +45,10 @@ struct powernow_k8_data { * frequency is in kHz */ struct cpufreq_frequency_table *powernow_table; -#ifdef CONFIG_X86_POWERNOW_K8_ACPI /* the acpi table needs to be kept. it's only available if ACPI was * used to determine valid frequency/vid/fid states */ struct acpi_processor_performance acpi_data; -#endif + /* we need to keep track of associated cores, but let cpufreq * handle hotplug events - so just point at cpufreq pol->cpus * structure */ @@ -222,10 +221,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid); static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index); -#ifdef CONFIG_X86_POWERNOW_K8_ACPI static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table); -#endif #ifdef CONFIG_SMP static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[]) diff --git a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c index 42da9bd..435a996 100644 --- a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c +++ b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c @@ -19,17 +19,19 @@ #include <linux/delay.h> #include <linux/cpufreq.h> +#include <linux/timex.h> +#include <linux/io.h> #include <asm/msr.h> -#include <asm/timex.h> -#include <asm/io.h> #define MMCR_BASE 0xfffef000 /* The default base address */ #define OFFS_CPUCTL 0x2 /* CPU Control Register */ static __u8 __iomem *cpuctl; -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "sc520_freq", msg) +#define PFX "sc520_freq: " static struct cpufreq_frequency_table sc520_freq_table[] = { {0x01, 100000}, @@ -43,7 +45,8 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) switch (clockspeed_reg & 0x03) { default: - printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg); + printk(KERN_ERR PFX "error: cpuctl register has unexpected " + "value %02x\n", clockspeed_reg); case 0x01: return 100000; case 0x02: @@ -51,7 +54,7 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) } } -static void sc520_freq_set_cpu_state (unsigned int state) +static void sc520_freq_set_cpu_state(unsigned int state) { struct cpufreq_freqs freqs; @@ -76,18 +79,19 @@ static void sc520_freq_set_cpu_state (unsigned int state) cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); }; -static int sc520_freq_verify (struct cpufreq_policy *policy) +static int sc520_freq_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]); } -static int sc520_freq_target (struct cpufreq_policy *policy, +static int sc520_freq_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int newstate = 0; - if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, sc520_freq_table, + target_freq, relation, &newstate)) return -EINVAL; sc520_freq_set_cpu_state(newstate); @@ -116,7 +120,7 @@ static int sc520_freq_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table); if (result) - return (result); + return result; cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu); @@ -131,7 +135,7 @@ static int sc520_freq_cpu_exit(struct cpufreq_policy *policy) } -static struct freq_attr* sc520_freq_attr[] = { +static struct freq_attr *sc520_freq_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -155,13 +159,13 @@ static int __init sc520_freq_init(void) int err; /* Test if we have the right hardware */ - if(c->x86_vendor != X86_VENDOR_AMD || - c->x86 != 4 || c->x86_model != 9) { + if (c->x86_vendor != X86_VENDOR_AMD || + c->x86 != 4 || c->x86_model != 9) { dprintk("no Elan SC520 processor found!\n"); return -ENODEV; } cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1); - if(!cpuctl) { + if (!cpuctl) { printk(KERN_ERR "sc520_freq: error: failed to remap memory\n"); return -ENOMEM; } diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c index dedc1e9..8bbb11a 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c @@ -39,7 +39,7 @@ static struct pci_dev *speedstep_chipset_dev; /* speedstep_processor */ -static unsigned int speedstep_processor = 0; +static unsigned int speedstep_processor; static u32 pmbase; @@ -54,7 +54,8 @@ static struct cpufreq_frequency_table speedstep_freqs[] = { }; -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "speedstep-ich", msg) /** @@ -62,7 +63,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = { * * Returns: -ENODEV if no register could be found */ -static int speedstep_find_register (void) +static int speedstep_find_register(void) { if (!speedstep_chipset_dev) return -ENODEV; @@ -90,7 +91,7 @@ static int speedstep_find_register (void) * * Tries to change the SpeedStep state. */ -static void speedstep_set_state (unsigned int state) +static void speedstep_set_state(unsigned int state) { u8 pm2_blk; u8 value; @@ -133,11 +134,11 @@ static void speedstep_set_state (unsigned int state) dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value); - if (state == (value & 0x1)) { - dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000)); - } else { - printk (KERN_ERR "cpufreq: change failed - I/O error\n"); - } + if (state == (value & 0x1)) + dprintk("change to %u MHz succeeded\n", + speedstep_get_frequency(speedstep_processor) / 1000); + else + printk(KERN_ERR "cpufreq: change failed - I/O error\n"); return; } @@ -149,7 +150,7 @@ static void speedstep_set_state (unsigned int state) * Tries to activate the SpeedStep status and control registers. * Returns -EINVAL on an unsupported chipset, and zero on success. */ -static int speedstep_activate (void) +static int speedstep_activate(void) { u16 value = 0; @@ -175,20 +176,18 @@ static int speedstep_activate (void) * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected * chipset, or zero on failure. */ -static unsigned int speedstep_detect_chipset (void) +static unsigned int speedstep_detect_chipset(void) { speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, - PCI_ANY_ID, - PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (speedstep_chipset_dev) return 4; /* 4-M */ speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, - PCI_ANY_ID, - PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (speedstep_chipset_dev) return 3; /* 3-M */ @@ -196,8 +195,7 @@ static unsigned int speedstep_detect_chipset (void) speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, - PCI_ANY_ID, - PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (speedstep_chipset_dev) { /* speedstep.c causes lockups on Dell Inspirons 8000 and @@ -208,8 +206,7 @@ static unsigned int speedstep_detect_chipset (void) hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_MC, - PCI_ANY_ID, - PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, NULL); if (!hostbridge) @@ -236,7 +233,7 @@ static unsigned int _speedstep_get(const struct cpumask *cpus) cpus_allowed = current->cpus_allowed; set_cpus_allowed_ptr(current, cpus); - speed = speedstep_get_processor_frequency(speedstep_processor); + speed = speedstep_get_frequency(speedstep_processor); set_cpus_allowed_ptr(current, &cpus_allowed); dprintk("detected %u kHz as current frequency\n", speed); return speed; @@ -251,11 +248,12 @@ static unsigned int speedstep_get(unsigned int cpu) * speedstep_target - set a new CPUFreq policy * @policy: new policy * @target_freq: the target frequency - * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) + * @relation: how that frequency relates to achieved frequency + * (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H) * * Sets a new CPUFreq policy. */ -static int speedstep_target (struct cpufreq_policy *policy, +static int speedstep_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { @@ -264,7 +262,8 @@ static int speedstep_target (struct cpufreq_policy *policy, cpumask_t cpus_allowed; int i; - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], + target_freq, relation, &newstate)) return -EINVAL; freqs.old = _speedstep_get(policy->cpus); @@ -308,7 +307,7 @@ static int speedstep_target (struct cpufreq_policy *policy, * Limit must be within speedstep_low_freq and speedstep_high_freq, with * at least one border included. */ -static int speedstep_verify (struct cpufreq_policy *policy) +static int speedstep_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); } @@ -344,7 +343,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) return -EIO; dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", + (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) + ? "low" : "high", (speed / 1000)); /* cpuinfo and default policy values */ @@ -352,9 +352,9 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); if (result) - return (result); + return result; - cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); + cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); return 0; } @@ -366,7 +366,7 @@ static int speedstep_cpu_exit(struct cpufreq_policy *policy) return 0; } -static struct freq_attr* speedstep_attr[] = { +static struct freq_attr *speedstep_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -396,13 +396,15 @@ static int __init speedstep_init(void) /* detect processor */ speedstep_processor = speedstep_detect_processor(); if (!speedstep_processor) { - dprintk("Intel(R) SpeedStep(TM) capable processor not found\n"); + dprintk("Intel(R) SpeedStep(TM) capable processor " + "not found\n"); return -ENODEV; } /* detect chipset */ if (!speedstep_detect_chipset()) { - dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n"); + dprintk("Intel(R) SpeedStep(TM) for this chipset not " + "(yet) available.\n"); return -ENODEV; } @@ -431,9 +433,11 @@ static void __exit speedstep_exit(void) } -MODULE_AUTHOR ("Dave Jones <davej@redhat.com>, Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dave Jones <davej@redhat.com>, " + "Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets " + "with ICH-M southbridges."); +MODULE_LICENSE("GPL"); module_init(speedstep_init); module_exit(speedstep_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c index cdac7d6..2e3c686 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c @@ -16,12 +16,16 @@ #include <linux/slab.h> #include <asm/msr.h> +#include <asm/tsc.h> #include "speedstep-lib.h" -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-lib", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "speedstep-lib", msg) + +#define PFX "speedstep-lib: " #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK -static int relaxed_check = 0; +static int relaxed_check; #else #define relaxed_check 0 #endif @@ -30,14 +34,14 @@ static int relaxed_check = 0; * GET PROCESSOR CORE SPEED IN KHZ * *********************************************************************/ -static unsigned int pentium3_get_frequency (unsigned int processor) +static unsigned int pentium3_get_frequency(unsigned int processor) { - /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ + /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ struct { unsigned int ratio; /* Frequency Multiplier (x10) */ u8 bitmap; /* power on configuration bits [27, 25:22] (in MSR 0x2a) */ - } msr_decode_mult [] = { + } msr_decode_mult[] = { { 30, 0x01 }, { 35, 0x05 }, { 40, 0x02 }, @@ -52,7 +56,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) { 85, 0x26 }, { 90, 0x20 }, { 100, 0x2b }, - { 0, 0xff } /* error or unknown value */ + { 0, 0xff } /* error or unknown value */ }; /* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */ @@ -60,7 +64,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) unsigned int value; /* Front Side Bus speed in MHz */ u8 bitmap; /* power on configuration bits [18: 19] (in MSR 0x2a) */ - } msr_decode_fsb [] = { + } msr_decode_fsb[] = { { 66, 0x0 }, { 100, 0x2 }, { 133, 0x1 }, @@ -85,7 +89,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor) } /* decode the multiplier */ - if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) { + if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) { dprintk("workaround for early PIIIs\n"); msr_lo &= 0x03c00000; } else @@ -97,9 +101,10 @@ static unsigned int pentium3_get_frequency (unsigned int processor) j++; } - dprintk("speed is %u\n", (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); + dprintk("speed is %u\n", + (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100)); - return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100); + return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100; } @@ -112,20 +117,23 @@ static unsigned int pentiumM_get_frequency(void) /* see table B-2 of 24547212.pdf */ if (msr_lo & 0x00040000) { - printk(KERN_DEBUG "speedstep-lib: PM - invalid FSB: 0x%x 0x%x\n", msr_lo, msr_tmp); + printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n", + msr_lo, msr_tmp); return 0; } msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * 100 * 1000)); + dprintk("bits 22-26 are 0x%x, speed is %u\n", + msr_tmp, (msr_tmp * 100 * 1000)); - return (msr_tmp * 100 * 1000); + return msr_tmp * 100 * 1000; } static unsigned int pentium_core_get_frequency(void) { u32 fsb = 0; u32 msr_lo, msr_tmp; + int ret; rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp); /* see table B-2 of 25366920.pdf */ @@ -153,12 +161,15 @@ static unsigned int pentium_core_get_frequency(void) } rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp); - dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp); + dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", + msr_lo, msr_tmp); msr_tmp = (msr_lo >> 22) & 0x1f; - dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * fsb)); + dprintk("bits 22-26 are 0x%x, speed is %u\n", + msr_tmp, (msr_tmp * fsb)); - return (msr_tmp * fsb); + ret = (msr_tmp * fsb); + return ret; } @@ -167,6 +178,16 @@ static unsigned int pentium4_get_frequency(void) struct cpuinfo_x86 *c = &boot_cpu_data; u32 msr_lo, msr_hi, mult; unsigned int fsb = 0; + unsigned int ret; + u8 fsb_code; + + /* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency + * to System Bus Frequency Ratio Field in the Processor Frequency + * Configuration Register of the MSR. Therefore the current + * frequency cannot be calculated and has to be measured. + */ + if (c->x86_model < 2) + return cpu_khz; rdmsr(0x2c, msr_lo, msr_hi); @@ -177,62 +198,61 @@ static unsigned int pentium4_get_frequency(void) * revision #12 in Table B-1: MSRs in the Pentium 4 and * Intel Xeon Processors, on page B-4 and B-5. */ - if (c->x86_model < 2) + fsb_code = (msr_lo >> 16) & 0x7; + switch (fsb_code) { + case 0: fsb = 100 * 1000; - else { - u8 fsb_code = (msr_lo >> 16) & 0x7; - switch (fsb_code) { - case 0: - fsb = 100 * 1000; - break; - case 1: - fsb = 13333 * 10; - break; - case 2: - fsb = 200 * 1000; - break; - } + break; + case 1: + fsb = 13333 * 10; + break; + case 2: + fsb = 200 * 1000; + break; } if (!fsb) - printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to <linux@brodo.de>\n"); + printk(KERN_DEBUG PFX "couldn't detect FSB speed. " + "Please send an e-mail to <linux@brodo.de>\n"); /* Multiplier. */ mult = msr_lo >> 24; - dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult)); + dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", + fsb, mult, (fsb * mult)); - return (fsb * mult); + ret = (fsb * mult); + return ret; } -unsigned int speedstep_get_processor_frequency(unsigned int processor) +unsigned int speedstep_get_frequency(unsigned int processor) { switch (processor) { - case SPEEDSTEP_PROCESSOR_PCORE: + case SPEEDSTEP_CPU_PCORE: return pentium_core_get_frequency(); - case SPEEDSTEP_PROCESSOR_PM: + case SPEEDSTEP_CPU_PM: return pentiumM_get_frequency(); - case SPEEDSTEP_PROCESSOR_P4D: - case SPEEDSTEP_PROCESSOR_P4M: + case SPEEDSTEP_CPU_P4D: + case SPEEDSTEP_CPU_P4M: return pentium4_get_frequency(); - case SPEEDSTEP_PROCESSOR_PIII_T: - case SPEEDSTEP_PROCESSOR_PIII_C: - case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: + case SPEEDSTEP_CPU_PIII_T: + case SPEEDSTEP_CPU_PIII_C: + case SPEEDSTEP_CPU_PIII_C_EARLY: return pentium3_get_frequency(processor); default: return 0; }; return 0; } -EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency); +EXPORT_SYMBOL_GPL(speedstep_get_frequency); /********************************************************************* * DETECT SPEEDSTEP-CAPABLE PROCESSOR * *********************************************************************/ -unsigned int speedstep_detect_processor (void) +unsigned int speedstep_detect_processor(void) { struct cpuinfo_x86 *c = &cpu_data(0); u32 ebx, msr_lo, msr_hi; @@ -261,7 +281,7 @@ unsigned int speedstep_detect_processor (void) * sample has ebx = 0x0f, production has 0x0e. */ if ((ebx == 0x0e) || (ebx == 0x0f)) - return SPEEDSTEP_PROCESSOR_P4M; + return SPEEDSTEP_CPU_P4M; break; case 7: /* @@ -272,7 +292,7 @@ unsigned int speedstep_detect_processor (void) * samples are only of B-stepping... */ if (ebx == 0x0e) - return SPEEDSTEP_PROCESSOR_P4M; + return SPEEDSTEP_CPU_P4M; break; case 9: /* @@ -288,10 +308,13 @@ unsigned int speedstep_detect_processor (void) * M-P4-Ms may have either ebx=0xe or 0xf [see above] * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf] * also, M-P4M HTs have ebx=0x8, too - * For now, they are distinguished by the model_id string + * For now, they are distinguished by the model_id + * string */ - if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL)) - return SPEEDSTEP_PROCESSOR_P4M; + if ((ebx == 0x0e) || + (strstr(c->x86_model_id, + "Mobile Intel(R) Pentium(R) 4") != NULL)) + return SPEEDSTEP_CPU_P4M; break; default: break; @@ -301,7 +324,8 @@ unsigned int speedstep_detect_processor (void) switch (c->x86_model) { case 0x0B: /* Intel PIII [Tualatin] */ - /* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */ + /* cpuid_ebx(1) is 0x04 for desktop PIII, + * 0x06 for mobile PIII-M */ ebx = cpuid_ebx(0x00000001); dprintk("ebx is %x\n", ebx); @@ -313,14 +337,15 @@ unsigned int speedstep_detect_processor (void) /* So far all PIII-M processors support SpeedStep. See * Intel's 24540640.pdf of June 2003 */ - return SPEEDSTEP_PROCESSOR_PIII_T; + return SPEEDSTEP_CPU_PIII_T; case 0x08: /* Intel PIII [Coppermine] */ /* all mobile PIII Coppermines have FSB 100 MHz * ==> sort out a few desktop PIIIs. */ rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi); + dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", + msr_lo, msr_hi); msr_lo &= 0x00c0000; if (msr_lo != 0x0080000) return 0; @@ -332,13 +357,15 @@ unsigned int speedstep_detect_processor (void) * bit 56 or 57 is set */ rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi); - dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi); - if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) { + dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", + msr_lo, msr_hi); + if ((msr_hi & (1<<18)) && + (relaxed_check ? 1 : (msr_hi & (3<<24)))) { if (c->x86_mask == 0x01) { dprintk("early PIII version\n"); - return SPEEDSTEP_PROCESSOR_PIII_C_EARLY; + return SPEEDSTEP_CPU_PIII_C_EARLY; } else - return SPEEDSTEP_PROCESSOR_PIII_C; + return SPEEDSTEP_CPU_PIII_C; } default: @@ -369,7 +396,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, dprintk("trying to determine both speeds\n"); /* get current speed */ - prev_speed = speedstep_get_processor_frequency(processor); + prev_speed = speedstep_get_frequency(processor); if (!prev_speed) return -EIO; @@ -379,7 +406,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, /* switch to low state */ set_state(SPEEDSTEP_LOW); - *low_speed = speedstep_get_processor_frequency(processor); + *low_speed = speedstep_get_frequency(processor); if (!*low_speed) { ret = -EIO; goto out; @@ -398,7 +425,7 @@ unsigned int speedstep_get_freqs(unsigned int processor, if (transition_latency) do_gettimeofday(&tv2); - *high_speed = speedstep_get_processor_frequency(processor); + *high_speed = speedstep_get_frequency(processor); if (!*high_speed) { ret = -EIO; goto out; @@ -426,9 +453,12 @@ unsigned int speedstep_get_freqs(unsigned int processor, /* check if the latency measurement is too high or too low * and set it to a safe value (500uSec) in that case */ - if (*transition_latency > 10000000 || *transition_latency < 50000) { - printk (KERN_WARNING "speedstep: frequency transition measured seems out of " - "range (%u nSec), falling back to a safe one of %u nSec.\n", + if (*transition_latency > 10000000 || + *transition_latency < 50000) { + printk(KERN_WARNING PFX "frequency transition " + "measured seems out of range (%u " + "nSec), falling back to a safe one of" + "%u nSec.\n", *transition_latency, 500000); *transition_latency = 500000; } @@ -436,15 +466,16 @@ unsigned int speedstep_get_freqs(unsigned int processor, out: local_irq_restore(flags); - return (ret); + return ret; } EXPORT_SYMBOL_GPL(speedstep_get_freqs); #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK module_param(relaxed_check, int, 0444); -MODULE_PARM_DESC(relaxed_check, "Don't do all checks for speedstep capability."); +MODULE_PARM_DESC(relaxed_check, + "Don't do all checks for speedstep capability."); #endif -MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers."); +MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h index b11bcc6..2b6c04e 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h @@ -12,17 +12,17 @@ /* processors */ -#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY 0x00000001 /* Coppermine core */ -#define SPEEDSTEP_PROCESSOR_PIII_C 0x00000002 /* Coppermine core */ -#define SPEEDSTEP_PROCESSOR_PIII_T 0x00000003 /* Tualatin core */ -#define SPEEDSTEP_PROCESSOR_P4M 0x00000004 /* P4-M */ +#define SPEEDSTEP_CPU_PIII_C_EARLY 0x00000001 /* Coppermine core */ +#define SPEEDSTEP_CPU_PIII_C 0x00000002 /* Coppermine core */ +#define SPEEDSTEP_CPU_PIII_T 0x00000003 /* Tualatin core */ +#define SPEEDSTEP_CPU_P4M 0x00000004 /* P4-M */ /* the following processors are not speedstep-capable and are not auto-detected * in speedstep_detect_processor(). However, their speed can be detected using - * the speedstep_get_processor_frequency() call. */ -#define SPEEDSTEP_PROCESSOR_PM 0xFFFFFF03 /* Pentium M */ -#define SPEEDSTEP_PROCESSOR_P4D 0xFFFFFF04 /* desktop P4 */ -#define SPEEDSTEP_PROCESSOR_PCORE 0xFFFFFF05 /* Core */ + * the speedstep_get_frequency() call. */ +#define SPEEDSTEP_CPU_PM 0xFFFFFF03 /* Pentium M */ +#define SPEEDSTEP_CPU_P4D 0xFFFFFF04 /* desktop P4 */ +#define SPEEDSTEP_CPU_PCORE 0xFFFFFF05 /* Core */ /* speedstep states -- only two of them */ @@ -34,7 +34,7 @@ extern unsigned int speedstep_detect_processor (void); /* detect the current speed (in khz) of the processor */ -extern unsigned int speedstep_get_processor_frequency(unsigned int processor); +extern unsigned int speedstep_get_frequency(unsigned int processor); /* detect the low and high speeds of the processor. The callback diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c index 8a85c93..befea08 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c @@ -19,8 +19,8 @@ #include <linux/cpufreq.h> #include <linux/slab.h> #include <linux/delay.h> +#include <linux/io.h> #include <asm/ist.h> -#include <asm/io.h> #include "speedstep-lib.h" @@ -30,12 +30,12 @@ * If user gives it, these are used. * */ -static int smi_port = 0; -static int smi_cmd = 0; -static unsigned int smi_sig = 0; +static int smi_port; +static int smi_cmd; +static unsigned int smi_sig; /* info about the processor */ -static unsigned int speedstep_processor = 0; +static unsigned int speedstep_processor; /* * There are only two frequency states for each processor. Values @@ -56,12 +56,13 @@ static struct cpufreq_frequency_table speedstep_freqs[] = { * of DMA activity going on? */ #define SMI_TRIES 5 -#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-smi", msg) +#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \ + "speedstep-smi", msg) /** * speedstep_smi_ownership */ -static int speedstep_smi_ownership (void) +static int speedstep_smi_ownership(void) { u32 command, result, magic, dummy; u32 function = GET_SPEEDSTEP_OWNER; @@ -70,16 +71,18 @@ static int speedstep_smi_ownership (void) command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); magic = virt_to_phys(magic_data); - dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port); + dprintk("trying to obtain ownership with command %x at port %x\n", + command, smi_port); __asm__ __volatile__( "push %%ebp\n" "out %%al, (%%dx)\n" "pop %%ebp\n" - : "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy), - "=S" (dummy) + : "=D" (result), + "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy), + "=S" (dummy) : "a" (command), "b" (function), "c" (0), "d" (smi_port), - "D" (0), "S" (magic) + "D" (0), "S" (magic) : "memory" ); @@ -97,10 +100,10 @@ static int speedstep_smi_ownership (void) * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing * shows that the latter occurs if !(ist_info.event & 0xFFFF). */ -static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) +static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high) { u32 command, result = 0, edi, high_mhz, low_mhz, dummy; - u32 state=0; + u32 state = 0; u32 function = GET_SPEEDSTEP_FREQS; if (!(ist_info.event & 0xFFFF)) { @@ -110,17 +113,25 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port); + dprintk("trying to determine frequencies with command %x at port %x\n", + command, smi_port); __asm__ __volatile__( "push %%ebp\n" "out %%al, (%%dx)\n" "pop %%ebp" - : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy) - : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0) + : "=a" (result), + "=b" (high_mhz), + "=c" (low_mhz), + "=d" (state), "=D" (edi), "=S" (dummy) + : "a" (command), + "b" (function), + "c" (state), + "d" (smi_port), "S" (0), "D" (0) ); - dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz); + dprintk("result %x, low_freq %u, high_freq %u\n", + result, low_mhz, high_mhz); /* abort if results are obviously incorrect... */ if ((high_mhz + low_mhz) < 600) @@ -137,26 +148,30 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high) * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) * */ -static int speedstep_get_state (void) +static int speedstep_get_state(void) { - u32 function=GET_SPEEDSTEP_STATE; + u32 function = GET_SPEEDSTEP_STATE; u32 result, state, edi, command, dummy; command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port); + dprintk("trying to determine current setting with command %x " + "at port %x\n", command, smi_port); __asm__ __volatile__( "push %%ebp\n" "out %%al, (%%dx)\n" "pop %%ebp\n" - : "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy) - : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0) + : "=a" (result), + "=b" (state), "=D" (edi), + "=c" (dummy), "=d" (dummy), "=S" (dummy) + : "a" (command), "b" (function), "c" (0), + "d" (smi_port), "S" (0), "D" (0) ); dprintk("state is %x, result is %x\n", state, result); - return (state & 1); + return state & 1; } @@ -165,11 +180,11 @@ static int speedstep_get_state (void) * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH) * */ -static void speedstep_set_state (unsigned int state) +static void speedstep_set_state(unsigned int state) { unsigned int result = 0, command, new_state, dummy; unsigned long flags; - unsigned int function=SET_SPEEDSTEP_STATE; + unsigned int function = SET_SPEEDSTEP_STATE; unsigned int retry = 0; if (state > 0x1) @@ -180,11 +195,14 @@ static void speedstep_set_state (unsigned int state) command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff); - dprintk("trying to set frequency to state %u with command %x at port %x\n", state, command, smi_port); + dprintk("trying to set frequency to state %u " + "with command %x at port %x\n", + state, command, smi_port); do { if (retry) { - dprintk("retry %u, previous result %u, waiting...\n", retry, result); + dprintk("retry %u, previous result %u, waiting...\n", + retry, result); mdelay(retry * 50); } retry++; @@ -192,20 +210,26 @@ static void speedstep_set_state (unsigned int state) "push %%ebp\n" "out %%al, (%%dx)\n" "pop %%ebp" - : "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy), - "=d" (dummy), "=S" (dummy) - : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0) + : "=b" (new_state), "=D" (result), + "=c" (dummy), "=a" (dummy), + "=d" (dummy), "=S" (dummy) + : "a" (command), "b" (function), "c" (state), + "d" (smi_port), "S" (0), "D" (0) ); } while ((new_state != state) && (retry <= SMI_TRIES)); /* enable IRQs */ local_irq_restore(flags); - if (new_state == state) { - dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result); - } else { - printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result); - } + if (new_state == state) + dprintk("change to %u MHz succeeded after %u tries " + "with result %u\n", + (speedstep_freqs[new_state].frequency / 1000), + retry, result); + else + printk(KERN_ERR "cpufreq: change to state %u " + "failed with new_state %u and result %u\n", + state, new_state, result); return; } @@ -219,13 +243,14 @@ static void speedstep_set_state (unsigned int state) * * Sets a new CPUFreq policy/freq. */ -static int speedstep_target (struct cpufreq_policy *policy, +static int speedstep_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int newstate = 0; struct cpufreq_freqs freqs; - if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate)) + if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], + target_freq, relation, &newstate)) return -EINVAL; freqs.old = speedstep_freqs[speedstep_get_state()].frequency; @@ -250,7 +275,7 @@ static int speedstep_target (struct cpufreq_policy *policy, * Limit must be within speedstep_low_freq and speedstep_high_freq, with * at least one border included. */ -static int speedstep_verify (struct cpufreq_policy *policy) +static int speedstep_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]); } @@ -259,7 +284,8 @@ static int speedstep_verify (struct cpufreq_policy *policy) static int speedstep_cpu_init(struct cpufreq_policy *policy) { int result; - unsigned int speed,state; + unsigned int speed, state; + unsigned int *low, *high; /* capability check */ if (policy->cpu != 0) @@ -272,19 +298,23 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) } /* detect low and high frequency */ - result = speedstep_smi_get_freqs(&speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency); + low = &speedstep_freqs[SPEEDSTEP_LOW].frequency; + high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency; + + result = speedstep_smi_get_freqs(low, high); if (result) { - /* fall back to speedstep_lib.c dection mechanism: try both states out */ - dprintk("could not detect low and high frequencies by SMI call.\n"); + /* fall back to speedstep_lib.c dection mechanism: + * try both states out */ + dprintk("could not detect low and high frequencies " + "by SMI call.\n"); result = speedstep_get_freqs(speedstep_processor, - &speedstep_freqs[SPEEDSTEP_LOW].frequency, - &speedstep_freqs[SPEEDSTEP_HIGH].frequency, + low, high, NULL, &speedstep_set_state); if (result) { - dprintk("could not detect two different speeds -- aborting.\n"); + dprintk("could not detect two different speeds" + " -- aborting.\n"); return result; } else dprintk("workaround worked.\n"); @@ -295,7 +325,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) speed = speedstep_freqs[state].frequency; dprintk("currently at %s speed setting - %i MHz\n", - (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high", + (speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) + ? "low" : "high", (speed / 1000)); /* cpuinfo and default policy values */ @@ -304,7 +335,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs); if (result) - return (result); + return result; cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu); @@ -321,7 +352,7 @@ static unsigned int speedstep_get(unsigned int cpu) { if (cpu) return -ENODEV; - return speedstep_get_processor_frequency(speedstep_processor); + return speedstep_get_frequency(speedstep_processor); } @@ -335,7 +366,7 @@ static int speedstep_resume(struct cpufreq_policy *policy) return result; } -static struct freq_attr* speedstep_attr[] = { +static struct freq_attr *speedstep_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -364,21 +395,23 @@ static int __init speedstep_init(void) speedstep_processor = speedstep_detect_processor(); switch (speedstep_processor) { - case SPEEDSTEP_PROCESSOR_PIII_T: - case SPEEDSTEP_PROCESSOR_PIII_C: - case SPEEDSTEP_PROCESSOR_PIII_C_EARLY: + case SPEEDSTEP_CPU_PIII_T: + case SPEEDSTEP_CPU_PIII_C: + case SPEEDSTEP_CPU_PIII_C_EARLY: break; default: speedstep_processor = 0; } if (!speedstep_processor) { - dprintk ("No supported Intel CPU detected.\n"); + dprintk("No supported Intel CPU detected.\n"); return -ENODEV; } - dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n", - ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level); + dprintk("signature:0x%.8lx, command:0x%.8lx, " + "event:0x%.8lx, perf_level:0x%.8lx.\n", + ist_info.signature, ist_info.command, + ist_info.event, ist_info.perf_level); /* Error if no IST-SMI BIOS or no PARM sig= 'ISGE' aka 'Intel Speedstep Gate E' */ @@ -416,17 +449,20 @@ static void __exit speedstep_exit(void) cpufreq_unregister_driver(&speedstep_driver); } -module_param(smi_port, int, 0444); -module_param(smi_cmd, int, 0444); -module_param(smi_sig, uint, 0444); +module_param(smi_port, int, 0444); +module_param(smi_cmd, int, 0444); +module_param(smi_sig, uint, 0444); -MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value -- Intel's default setting is 0xb2"); -MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value -- Intel's default setting is 0x82"); -MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the SMI interface."); +MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value " + "-- Intel's default setting is 0xb2"); +MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value " + "-- Intel's default setting is 0x82"); +MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the " + "SMI interface."); -MODULE_AUTHOR ("Hiroshi Miura"); -MODULE_DESCRIPTION ("Speedstep driver for IST applet SMI interface."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Hiroshi Miura"); +MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface."); +MODULE_LICENSE("GPL"); module_init(speedstep_init); module_exit(speedstep_exit); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index b09d4eb..7437fa1 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -4,6 +4,7 @@ #include <linux/string.h> #include <linux/bitops.h> #include <linux/smp.h> +#include <linux/sched.h> #include <linux/thread_info.h> #include <linux/module.h> @@ -61,11 +62,16 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) /* * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate - * with P/T states and does not stop in deep C-states + * with P/T states and does not stop in deep C-states. + * + * It is also reliable across cores and sockets. (but not across + * cabinets - we turn it off in that case explicitly.) */ if (c->x86_power & (1 << 8)) { set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC); + set_cpu_cap(c, X86_FEATURE_TSC_RELIABLE); + sched_clock_stable = 1; } /* diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index a00545f..648b3a2 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -80,6 +80,7 @@ static inline void hpet_clear_mapping(void) */ static int boot_hpet_disable; int hpet_force_user; +static int hpet_verbose; static int __init hpet_setup(char *str) { @@ -88,6 +89,8 @@ static int __init hpet_setup(char *str) boot_hpet_disable = 1; if (!strncmp("force", str, 5)) hpet_force_user = 1; + if (!strncmp("verbose", str, 7)) + hpet_verbose = 1; } return 1; } @@ -119,6 +122,43 @@ int is_hpet_enabled(void) } EXPORT_SYMBOL_GPL(is_hpet_enabled); +static void _hpet_print_config(const char *function, int line) +{ + u32 i, timers, l, h; + printk(KERN_INFO "hpet: %s(%d):\n", function, line); + l = hpet_readl(HPET_ID); + h = hpet_readl(HPET_PERIOD); + timers = ((l & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1; + printk(KERN_INFO "hpet: ID: 0x%x, PERIOD: 0x%x\n", l, h); + l = hpet_readl(HPET_CFG); + h = hpet_readl(HPET_STATUS); + printk(KERN_INFO "hpet: CFG: 0x%x, STATUS: 0x%x\n", l, h); + l = hpet_readl(HPET_COUNTER); + h = hpet_readl(HPET_COUNTER+4); + printk(KERN_INFO "hpet: COUNTER_l: 0x%x, COUNTER_h: 0x%x\n", l, h); + + for (i = 0; i < timers; i++) { + l = hpet_readl(HPET_Tn_CFG(i)); + h = hpet_readl(HPET_Tn_CFG(i)+4); + printk(KERN_INFO "hpet: T%d: CFG_l: 0x%x, CFG_h: 0x%x\n", + i, l, h); + l = hpet_readl(HPET_Tn_CMP(i)); + h = hpet_readl(HPET_Tn_CMP(i)+4); + printk(KERN_INFO "hpet: T%d: CMP_l: 0x%x, CMP_h: 0x%x\n", + i, l, h); + l = hpet_readl(HPET_Tn_ROUTE(i)); + h = hpet_readl(HPET_Tn_ROUTE(i)+4); + printk(KERN_INFO "hpet: T%d ROUTE_l: 0x%x, ROUTE_h: 0x%x\n", + i, l, h); + } +} + +#define hpet_print_config() \ +do { \ + if (hpet_verbose) \ + _hpet_print_config(__FUNCTION__, __LINE__); \ +} while (0) + /* * When the hpet driver (/dev/hpet) is enabled, we need to reserve * timer 0 and timer 1 in case of RTC emulation. @@ -191,27 +231,37 @@ static struct clock_event_device hpet_clockevent = { .rating = 50, }; -static void hpet_start_counter(void) +static void hpet_stop_counter(void) { unsigned long cfg = hpet_readl(HPET_CFG); - cfg &= ~HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); hpet_writel(0, HPET_COUNTER); hpet_writel(0, HPET_COUNTER + 4); +} + +static void hpet_start_counter(void) +{ + unsigned long cfg = hpet_readl(HPET_CFG); cfg |= HPET_CFG_ENABLE; hpet_writel(cfg, HPET_CFG); } +static void hpet_restart_counter(void) +{ + hpet_stop_counter(); + hpet_start_counter(); +} + static void hpet_resume_device(void) { force_hpet_resume(); } -static void hpet_restart_counter(void) +static void hpet_resume_counter(void) { hpet_resume_device(); - hpet_start_counter(); + hpet_restart_counter(); } static void hpet_enable_legacy_int(void) @@ -259,29 +309,23 @@ static int hpet_setup_msi_irq(unsigned int irq); static void hpet_set_mode(enum clock_event_mode mode, struct clock_event_device *evt, int timer) { - unsigned long cfg, cmp, now; + unsigned long cfg; uint64_t delta; switch (mode) { case CLOCK_EVT_MODE_PERIODIC: + hpet_stop_counter(); delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult; delta >>= evt->shift; - now = hpet_readl(HPET_COUNTER); - cmp = now + (unsigned long) delta; cfg = hpet_readl(HPET_Tn_CFG(timer)); /* Make sure we use edge triggered interrupts */ cfg &= ~HPET_TN_LEVEL; cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL | HPET_TN_32BIT; hpet_writel(cfg, HPET_Tn_CFG(timer)); - /* - * The first write after writing TN_SETVAL to the - * config register sets the counter value, the second - * write sets the period. - */ - hpet_writel(cmp, HPET_Tn_CMP(timer)); - udelay(1); hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer)); + hpet_start_counter(); + hpet_print_config(); break; case CLOCK_EVT_MODE_ONESHOT: @@ -308,6 +352,7 @@ static void hpet_set_mode(enum clock_event_mode mode, irq_set_affinity(hdev->irq, cpumask_of(hdev->cpu)); enable_irq(hdev->irq); } + hpet_print_config(); break; } } @@ -526,6 +571,7 @@ static void hpet_msi_capability_lookup(unsigned int start_timer) num_timers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT); num_timers++; /* Value read out starts from 0 */ + hpet_print_config(); hpet_devs = kzalloc(sizeof(struct hpet_dev) * num_timers, GFP_KERNEL); if (!hpet_devs) @@ -695,7 +741,7 @@ static struct clocksource clocksource_hpet = { .mask = HPET_MASK, .shift = HPET_SHIFT, .flags = CLOCK_SOURCE_IS_CONTINUOUS, - .resume = hpet_restart_counter, + .resume = hpet_resume_counter, #ifdef CONFIG_X86_64 .vread = vread_hpet, #endif @@ -707,7 +753,7 @@ static int hpet_clocksource_register(void) cycle_t t1; /* Start the counter */ - hpet_start_counter(); + hpet_restart_counter(); /* Verify whether hpet counter works */ t1 = read_hpet(); @@ -793,6 +839,7 @@ int __init hpet_enable(void) * information and the number of channels */ id = hpet_readl(HPET_ID); + hpet_print_config(); #ifdef CONFIG_HPET_EMULATE_RTC /* @@ -845,6 +892,7 @@ static __init int hpet_late_init(void) return -ENODEV; hpet_reserve_platform_timers(hpet_readl(HPET_ID)); + hpet_print_config(); for_each_online_cpu(cpu) { hpet_cpuhp_notify(NULL, CPU_ONLINE, (void *)(long)cpu); diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 6a5a2970..e95022e 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -171,7 +171,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, ich_force_enable_hpet); - +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3a16, /* ICH10 */ + ich_force_enable_hpet); static struct pci_dev *cached_dev; diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 462b9ba..7a567eb 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -17,20 +17,21 @@ #include <asm/delay.h> #include <asm/hypervisor.h> -unsigned int cpu_khz; /* TSC clocks / usec, not used here */ +unsigned int __read_mostly cpu_khz; /* TSC clocks / usec, not used here */ EXPORT_SYMBOL(cpu_khz); -unsigned int tsc_khz; + +unsigned int __read_mostly tsc_khz; EXPORT_SYMBOL(tsc_khz); /* * TSC can be unstable due to cpufreq or due to unsynced TSCs */ -static int tsc_unstable; +static int __read_mostly tsc_unstable; /* native_sched_clock() is called before tsc_init(), so we must start with the TSC soft disabled to prevent erroneous rdtsc usage on !cpu_has_tsc processors */ -static int tsc_disabled = -1; +static int __read_mostly tsc_disabled = -1; static int tsc_clocksource_reliable; /* @@ -543,8 +544,6 @@ unsigned long native_calibrate_tsc(void) return tsc_pit_min; } -#ifdef CONFIG_X86_32 -/* Only called from the Powernow K7 cpu freq driver */ int recalibrate_cpu_khz(void) { #ifndef CONFIG_SMP @@ -566,7 +565,6 @@ int recalibrate_cpu_khz(void) EXPORT_SYMBOL(recalibrate_cpu_khz); -#endif /* CONFIG_X86_32 */ /* Accelerators for sched_clock() * convert from cycles(64bits) => nanoseconds (64bits) |