x86,percpu: generalize lpage first chunk allocator

Generalize and move x86 setup_pcpu_lpage() into
pcpu_lpage_first_chunk().  setup_pcpu_lpage() now is a simple wrapper
around the generalized version.  Other than taking size parameters and
using arch supplied callbacks to allocate/free/map memory,
pcpu_lpage_first_chunk() is identical to the original implementation.

This simplifies arch code and will help converting more archs to
dynamic percpu allocator.

While at it, factor out pcpu_calc_fc_sizes() which is common to
pcpu_embed_first_chunk() and pcpu_lpage_first_chunk().

[ Impact: code reorganization and generalization ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>

1 files changed, 11 insertions, 158 deletions

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index ab896b3..4f2e0ac 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -137,44 +137,21 @@ static void __init pcpu_fc_free(void *ptr, size_t size)
 }
 
 /*
- * Large page remap allocator
- *
- * This allocator uses PMD page as unit.  A PMD page is allocated for
- * each cpu and each is remapped into vmalloc area using PMD mapping.
- * As PMD page is quite large, only part of it is used for the first
- * chunk.  Unused part is returned to the bootmem allocator.
- *
- * So, the PMD pages are mapped twice - once to the physical mapping
- * and to the vmalloc area for the first percpu chunk.  The double
- * mapping does add one more PMD TLB entry pressure but still is much
- * better than only using 4k mappings while still being NUMA friendly.
+ * Large page remapping allocator
  */
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-struct pcpul_ent {
-	unsigned int	cpu;
-	void		*ptr;
-};
-
-static size_t pcpul_size;
-static struct pcpul_ent *pcpul_map;
-static struct vm_struct pcpul_vm;
-
-static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
+static void __init pcpul_map(void *ptr, size_t size, void *addr)
 {
-	size_t off = (size_t)pageno << PAGE_SHIFT;
+	pmd_t *pmd, pmd_v;
 
-	if (off >= pcpul_size)
-		return NULL;
-
-	return virt_to_page(pcpul_map[cpu].ptr + off);
+	pmd = populate_extra_pmd((unsigned long)addr);
+	pmd_v = pfn_pmd(page_to_pfn(virt_to_page(ptr)), PAGE_KERNEL_LARGE);
+	set_pmd(pmd, pmd_v);
 }
 
 static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 {
-	size_t map_size, dyn_size;
-	unsigned int cpu;
-	int i, j;
-	ssize_t ret;
+	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 
 	if (!chosen) {
 		size_t vm_size = VMALLOC_END - VMALLOC_START;
@@ -198,134 +175,10 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 		return -EINVAL;
 	}
 
-	/*
-	 * Currently supports only single page.  Supporting multiple
-	 * pages won't be too difficult if it ever becomes necessary.
-	 */
-	pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
-			       PERCPU_DYNAMIC_RESERVE);
-	if (pcpul_size > PMD_SIZE) {
-		pr_warning("PERCPU: static data is larger than large page, "
-			   "can't use large page\n");
-		return -EINVAL;
-	}
-	dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
-
-	/* allocate pointer array and alloc large pages */
-	map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
-	pcpul_map = alloc_bootmem(map_size);
-
-	for_each_possible_cpu(cpu) {
-		pcpul_map[cpu].cpu = cpu;
-		pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
-							PMD_SIZE);
-		if (!pcpul_map[cpu].ptr) {
-			pr_warning("PERCPU: failed to allocate large page "
-				   "for cpu%u\n", cpu);
-			goto enomem;
-		}
-
-		/*
-		 * Only use pcpul_size bytes and give back the rest.
-		 *
-		 * Ingo: The 2MB up-rounding bootmem is needed to make
-		 * sure the partial 2MB page is still fully RAM - it's
-		 * not well-specified to have a PAT-incompatible area
-		 * (unmapped RAM, device memory, etc.) in that hole.
-		 */
-		free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size),
-			     PMD_SIZE - pcpul_size);
-
-		memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size);
-	}
-
-	/* allocate address and map */
-	pcpul_vm.flags = VM_ALLOC;
-	pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
-	vm_area_register_early(&pcpul_vm, PMD_SIZE);
-
-	for_each_possible_cpu(cpu) {
-		pmd_t *pmd, pmd_v;
-
-		pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr +
-					 cpu * PMD_SIZE);
-		pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)),
-				PAGE_KERNEL_LARGE);
-		set_pmd(pmd, pmd_v);
-	}
-
-	/* we're ready, commit */
-	pr_info("PERCPU: Remapped at %p with large pages, static data "
-		"%zu bytes\n", pcpul_vm.addr, static_size);
-
-	ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
-				     PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
-				     PMD_SIZE, pcpul_vm.addr, NULL);
-
-	/* sort pcpul_map array for pcpu_lpage_remapped() */
-	for (i = 0; i < num_possible_cpus() - 1; i++)
-		for (j = i + 1; j < num_possible_cpus(); j++)
-			if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
-				struct pcpul_ent tmp = pcpul_map[i];
-				pcpul_map[i] = pcpul_map[j];
-				pcpul_map[j] = tmp;
-			}
-
-	return ret;
-
-enomem:
-	for_each_possible_cpu(cpu)
-		if (pcpul_map[cpu].ptr)
-			free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size);
-	free_bootmem(__pa(pcpul_map), map_size);
-	return -ENOMEM;
-}
-
-/**
- * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area
- * @kaddr: the kernel address in question
- *
- * Determine whether @kaddr falls in the pcpul recycled area.  This is
- * used by pageattr to detect VM aliases and break up the pcpu PMD
- * mapping such that the same physical page is not mapped under
- * different attributes.
- *
- * The recycled area is always at the tail of a partially used PMD
- * page.
- *
- * RETURNS:
- * Address of corresponding remapped pcpu address if match is found;
- * otherwise, NULL.
- */
-void *pcpu_lpage_remapped(void *kaddr)
-{
-	void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
-	unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
-	int left = 0, right = num_possible_cpus() - 1;
-	int pos;
-
-	/* pcpul in use at all? */
-	if (!pcpul_map)
-		return NULL;
-
-	/* okay, perform binary search */
-	while (left <= right) {
-		pos = (left + right) / 2;
-
-		if (pcpul_map[pos].ptr < pmd_addr)
-			left = pos + 1;
-		else if (pcpul_map[pos].ptr > pmd_addr)
-			right = pos - 1;
-		else {
-			/* it shouldn't be in the area for the first chunk */
-			WARN_ON(offset < pcpul_size);
-
-			return pcpul_vm.addr +
-				pcpul_map[pos].cpu * PMD_SIZE + offset;
-		}
-	}
-
-	return NULL;
+	return pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+				      reserve - PERCPU_FIRST_CHUNK_RESERVE,
+				      PMD_SIZE,
+				      pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
 }
 #else
 static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)