summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/hpet.c
diff options
context:
space:
mode:
authorAndreas Herrmann <andreas.herrmann3@amd.com>2009-04-21 20:00:37 +0200
committerIngo Molnar <mingo@elte.hu>2009-04-22 15:53:40 +0200
commit7a6f9cbb37120c745fc187083fb5c3de4dca4f97 (patch)
treeb943ff6c61085506cde9d92bfb5b859b5b3c6872 /arch/x86/kernel/hpet.c
parent3568b71d46bea87da1936902b6fbb2a3b1154b3d (diff)
downloadop-kernel-dev-7a6f9cbb37120c745fc187083fb5c3de4dca4f97.zip
op-kernel-dev-7a6f9cbb37120c745fc187083fb5c3de4dca4f97.tar.gz
x86: hpet: fix periodic mode programming on AMD 81xx
(See http://bugzilla.kernel.org/show_bug.cgi?id=12961) It partially reverts commit c23e253e67c9d8a91a0ffa33c1f571a17f0a2403 (x86: hpet: stop HPET_COUNTER when programming periodic mode) HPET on AMD 81xx chipset needs a second write (with HPET_TN_SETVAL cleared) to T0_CMP register to set the period in periodic mode. With this patch HPET_COUNTER is still stopped but not reset when HPET is programmed in periodic mode. This should help to avoid races when HPET is programmed in periodic mode and fixes a boot time hang that I've observed on a machine when using 1000HZ. [ Impact: fix boot time hang on machines with AMD 81xx chipset ] Reported-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Tested-by: Jeff Mahoney <jeffm@suse.com> LKML-Reference: <20090421180037.GA2763@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/x86/kernel/hpet.c')
-rw-r--r--arch/x86/kernel/hpet.c18
1 files changed, 17 insertions, 1 deletions
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 3f0019e..81408b9 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -236,6 +236,10 @@ static void hpet_stop_counter(void)
unsigned long cfg = hpet_readl(HPET_CFG);
cfg &= ~HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
+}
+
+static void hpet_reset_counter(void)
+{
hpet_writel(0, HPET_COUNTER);
hpet_writel(0, HPET_COUNTER + 4);
}
@@ -250,6 +254,7 @@ static void hpet_start_counter(void)
static void hpet_restart_counter(void)
{
hpet_stop_counter();
+ hpet_reset_counter();
hpet_start_counter();
}
@@ -309,7 +314,7 @@ static int hpet_setup_msi_irq(unsigned int irq);
static void hpet_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt, int timer)
{
- unsigned long cfg;
+ unsigned long cfg, cmp, now;
uint64_t delta;
switch (mode) {
@@ -317,12 +322,23 @@ static void hpet_set_mode(enum clock_event_mode mode,
hpet_stop_counter();
delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
delta >>= evt->shift;
+ now = hpet_readl(HPET_COUNTER);
+ cmp = now + (unsigned long) delta;
cfg = hpet_readl(HPET_Tn_CFG(timer));
/* Make sure we use edge triggered interrupts */
cfg &= ~HPET_TN_LEVEL;
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_Tn_CFG(timer));
+ hpet_writel(cmp, HPET_Tn_CMP(timer));
+ udelay(1);
+ /*
+ * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL
+ * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL
+ * bit is automatically cleared after the first write.
+ * (See AMD-8111 HyperTransport I/O Hub Data Sheet,
+ * Publication # 24674)
+ */
hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
hpet_start_counter();
hpet_print_config();
OpenPOWER on IntegriCloud