summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/hpet.c
diff options
context:
space:
mode:
authorJan Beulich <JBeulich@suse.com>2012-04-02 15:15:55 +0100
committerIngo Molnar <mingo@kernel.org>2012-05-07 15:06:27 +0200
commit396e2c6fed4ff13b53ce0e573105531cf53b0cad (patch)
tree77449d826523f8bbe62fa7f733095e6544547cfe /arch/x86/kernel/hpet.c
parentfebb72a6e4cc6c8cffcc1ea649a3fb364f1ea432 (diff)
downloadop-kernel-dev-396e2c6fed4ff13b53ce0e573105531cf53b0cad.zip
op-kernel-dev-396e2c6fed4ff13b53ce0e573105531cf53b0cad.tar.gz
x86: Clear HPET configuration registers on startup
While Linux itself has been calling hpet_disable() for quite a while, having e.g. a secondary (kexec) kernel depend on such behavior of the primary (crashed) environment is fragile. It particularly broke until very recently when the primary environment was Xen based, as that hypervisor did not clear any of the HPET settings it may have used. Rather than blindly (and incompletely) clearing certain HPET settings in hpet_disable(), latch the config register settings during boot and restore then here. (Note on the hpet_set_mode() change: Now that we're clearing the level bit upon initialization, there's no need anymore to do so here.) Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/4F79D0BB020000780007C02D@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Diffstat (limited to 'arch/x86/kernel/hpet.c')
-rw-r--r--arch/x86/kernel/hpet.c59
1 files changed, 51 insertions, 8 deletions
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ad0de0c..70bce5d 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -319,8 +319,6 @@ static void hpet_set_mode(enum clock_event_mode mode,
now = hpet_readl(HPET_COUNTER);
cmp = now + (unsigned int) delta;
cfg = hpet_readl(HPET_Tn_CFG(timer));
- /* Make sure we use edge triggered interrupts */
- cfg &= ~HPET_TN_LEVEL;
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_Tn_CFG(timer));
@@ -787,15 +785,16 @@ static int hpet_clocksource_register(void)
return 0;
}
+static u32 *hpet_boot_cfg;
+
/**
* hpet_enable - Try to setup the HPET timer. Returns 1 on success.
*/
int __init hpet_enable(void)
{
- unsigned long hpet_period;
- unsigned int id;
+ u32 hpet_period, cfg, id;
u64 freq;
- int i;
+ unsigned int i, last;
if (!is_hpet_capable())
return 0;
@@ -847,15 +846,45 @@ int __init hpet_enable(void)
id = hpet_readl(HPET_ID);
hpet_print_config();
+ last = (id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT;
+
#ifdef CONFIG_HPET_EMULATE_RTC
/*
* The legacy routing mode needs at least two channels, tick timer
* and the rtc emulation channel.
*/
- if (!(id & HPET_ID_NUMBER))
+ if (!last)
goto out_nohpet;
#endif
+ cfg = hpet_readl(HPET_CFG);
+ hpet_boot_cfg = kmalloc((last + 2) * sizeof(*hpet_boot_cfg),
+ GFP_KERNEL);
+ if (hpet_boot_cfg)
+ *hpet_boot_cfg = cfg;
+ else
+ pr_warn("HPET initial state will not be saved\n");
+ cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY);
+ hpet_writel(cfg, HPET_Tn_CFG(i));
+ if (cfg)
+ pr_warn("HPET: Unrecognized bits %#x set in global cfg\n",
+ cfg);
+
+ for (i = 0; i <= last; ++i) {
+ cfg = hpet_readl(HPET_Tn_CFG(i));
+ if (hpet_boot_cfg)
+ hpet_boot_cfg[i + 1] = cfg;
+ cfg &= ~(HPET_TN_ENABLE | HPET_TN_LEVEL | HPET_TN_FSB);
+ hpet_writel(cfg, HPET_Tn_CFG(i));
+ cfg &= ~(HPET_TN_PERIODIC | HPET_TN_PERIODIC_CAP
+ | HPET_TN_64BIT_CAP | HPET_TN_32BIT | HPET_TN_ROUTE
+ | HPET_TN_FSB | HPET_TN_FSB_CAP);
+ if (cfg)
+ pr_warn("HPET: Unrecognized bits %#x set in cfg#%u\n",
+ cfg, i);
+ }
+ hpet_print_config();
+
if (hpet_clocksource_register())
goto out_nohpet;
@@ -923,14 +952,28 @@ fs_initcall(hpet_late_init);
void hpet_disable(void)
{
if (is_hpet_capable() && hpet_virt_address) {
- unsigned int cfg = hpet_readl(HPET_CFG);
+ unsigned int cfg = hpet_readl(HPET_CFG), id, last;
- if (hpet_legacy_int_enabled) {
+ if (hpet_boot_cfg)
+ cfg = *hpet_boot_cfg;
+ else if (hpet_legacy_int_enabled) {
cfg &= ~HPET_CFG_LEGACY;
hpet_legacy_int_enabled = 0;
}
cfg &= ~HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
+
+ if (!hpet_boot_cfg)
+ return;
+
+ id = hpet_readl(HPET_ID);
+ last = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT);
+
+ for (id = 0; id <= last; ++id)
+ hpet_writel(hpet_boot_cfg[id + 1], HPET_Tn_CFG(id));
+
+ if (*hpet_boot_cfg & HPET_CFG_ENABLE)
+ hpet_writel(*hpet_boot_cfg, HPET_CFG);
}
}
OpenPOWER on IntegriCloud