Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 core updates from Ingo Molnar:
 "There were so many changes in the x86/asm, x86/apic and x86/mm topics
  in this cycle that the topical separation of -tip broke down somewhat -
  so the result is a more traditional architecture pull request,
  collected into the 'x86/core' topic.

  The topics were still maintained separately as far as possible, so
  bisectability and conceptual separation should still be pretty good -
  but there were a handful of merge points to avoid excessive
  dependencies (and conflicts) that would have been poorly tested in the
  end.

  The next cycle will hopefully be much more quiet (or at least will
  have fewer dependencies).

  The main changes in this cycle were:

   * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
     Gleixner)

     - This is the second and most intrusive part of changes to the x86
       interrupt handling - full conversion to hierarchical interrupt
       domains:

          [IOAPIC domain]   -----
                                 |
          [MSI domain]      --------[Remapping domain] ----- [ Vector domain ]
                                 |   (optional)          |
          [HPET MSI domain] -----                        |
                                                         |
          [DMAR domain]     -----------------------------
                                                         |
          [Legacy domain]   -----------------------------

       This now reflects the actual hardware and allowed us to distangle
       the domain specific code from the underlying parent domain, which
       can be optional in the case of interrupt remapping.  It's a clear
       separation of functionality and removes quite some duct tape
       constructs which plugged the remap code between ioapic/msi/hpet
       and the vector management.

     - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
       injection into guests (Feng Wu)

   * x86/asm changes:

     - Tons of cleanups and small speedups, micro-optimizations.  This
       is in preparation to move a good chunk of the low level entry
       code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
       Brian Gerst)

     - Moved all system entry related code to a new home under
       arch/x86/entry/ (Ingo Molnar)

     - Removal of the fragile and ugly CFI dwarf debuginfo annotations.
       Conversion to C will reintroduce many of them - but meanwhile
       they are only getting in the way, and the upstream kernel does
       not rely on them (Ingo Molnar)

     - NOP handling refinements. (Borislav Petkov)

   * x86/mm changes:

     - Big PAT and MTRR rework: making the code more robust and
       preparing to phase out exposing direct MTRR interfaces to drivers -
       in favor of using PAT driven interfaces (Toshi Kani, Luis R
       Rodriguez, Borislav Petkov)

     - New ioremap_wt()/set_memory_wt() interfaces to support
       Write-Through cached memory mappings.  This is especially
       important for good performance on NVDIMM hardware (Toshi Kani)

   * x86/ras changes:

     - Add support for deferred errors on AMD (Aravind Gopalakrishnan)

       This is an important RAS feature which adds hardware support for
       poisoned data.  That means roughly that the hardware marks data
       which it has detected as corrupted but wasn't able to correct, as
       poisoned data and raises an APIC interrupt to signal that in the
       form of a deferred error.  It is the OS's responsibility then to
       take proper recovery action and thus prolonge system lifetime as
       far as possible.

     - Add support for Intel "Local MCE"s: upcoming CPUs will support
       CPU-local MCE interrupts, as opposed to the traditional system-
       wide broadcasted MCE interrupts (Ashok Raj)

     - Misc cleanups (Borislav Petkov)

   * x86/platform changes:

     - Intel Atom SoC updates

  ... and lots of other cleanups, fixlets and other changes - see the
  shortlog and the Git log for details"

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
  x86/hpet: Use proper hpet device number for MSI allocation
  x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
  x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
  x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
  x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  iommu, x86: Properly handle posted interrupts for IOMMU hotplug
  iommu, x86: Provide irq_remapping_cap() interface
  iommu, x86: Setup Posted-Interrupts capability for Intel iommu
  iommu, x86: Add cap_pi_support() to detect VT-d PI capability
  iommu, x86: Avoid migrating VT-d posted interrupts
  iommu, x86: Save the mode (posted or remapped) of an IRTE
  iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
  iommu: dmar: Provide helper to copy shared irte fields
  iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
  iommu: Add new member capability to struct irq_remap_ops
  x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
  x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
  x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
  ...

1 files changed, 121 insertions, 20 deletions

diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 55ad9b3..e99b150 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -1,19 +1,13 @@
 /*
- *  (c) 2005-2012 Advanced Micro Devices, Inc.
+ *  (c) 2005-2015 Advanced Micro Devices, Inc.
  *  Your use of this code is subject to the terms and conditions of the
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
  *
  *  Written by Jacob Shin - AMD, Inc.
- *
  *  Maintained by: Borislav Petkov <bp@alien8.de>
  *
- *  April 2006
- *     - added support for AMD Family 0x10 processors
- *  May 2012
- *     - major scrubbing
- *
- *  All MC4_MISCi registers are shared between multi-cores
+ *  All MC4_MISCi registers are shared between cores on a node.
  */
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
@@ -32,6 +26,7 @@
 #include <asm/idle.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
+#include <asm/trace/irq_vectors.h>
 
 #define NR_BLOCKS         9
 #define THRESHOLD_MAX     0xFFF
@@ -47,6 +42,13 @@
 #define MASK_BLKPTR_LO    0xFF000000
 #define MCG_XBLK_ADDR     0xC0000400
 
+/* Deferred error settings */
+#define MSR_CU_DEF_ERR		0xC0000410
+#define MASK_DEF_LVTOFF		0x000000F0
+#define MASK_DEF_INT_TYPE	0x00000006
+#define DEF_LVT_OFF		0x2
+#define DEF_INT_TYPE_APIC	0x2
+
 static const char * const th_names[] = {
 	"load_store",
 	"insn_fetch",
@@ -60,6 +62,13 @@ static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks);
 static DEFINE_PER_CPU(unsigned char, bank_map);	/* see which banks are on */
 
 static void amd_threshold_interrupt(void);
+static void amd_deferred_error_interrupt(void);
+
+static void default_deferred_error_interrupt(void)
+{
+	pr_err("Unexpected deferred interrupt at vector %x\n", DEFERRED_ERROR_VECTOR);
+}
+void (*deferred_error_int_vector)(void) = default_deferred_error_interrupt;
 
 /*
  * CPU Initialization
@@ -196,7 +205,7 @@ static void mce_threshold_block_init(struct threshold_block *b, int offset)
 	threshold_restart_bank(&tr);
 };
 
-static int setup_APIC_mce(int reserved, int new)
+static int setup_APIC_mce_threshold(int reserved, int new)
 {
 	if (reserved < 0 && !setup_APIC_eilvt(new, THRESHOLD_APIC_VECTOR,
 					      APIC_EILVT_MSG_FIX, 0))
@@ -205,6 +214,39 @@ static int setup_APIC_mce(int reserved, int new)
 	return reserved;
 }
 
+static int setup_APIC_deferred_error(int reserved, int new)
+{
+	if (reserved < 0 && !setup_APIC_eilvt(new, DEFERRED_ERROR_VECTOR,
+					      APIC_EILVT_MSG_FIX, 0))
+		return new;
+
+	return reserved;
+}
+
+static void deferred_error_interrupt_enable(struct cpuinfo_x86 *c)
+{
+	u32 low = 0, high = 0;
+	int def_offset = -1, def_new;
+
+	if (rdmsr_safe(MSR_CU_DEF_ERR, &low, &high))
+		return;
+
+	def_new = (low & MASK_DEF_LVTOFF) >> 4;
+	if (!(low & MASK_DEF_LVTOFF)) {
+		pr_err(FW_BUG "Your BIOS is not setting up LVT offset 0x2 for deferred error IRQs correctly.\n");
+		def_new = DEF_LVT_OFF;
+		low = (low & ~MASK_DEF_LVTOFF) | (DEF_LVT_OFF << 4);
+	}
+
+	def_offset = setup_APIC_deferred_error(def_offset, def_new);
+	if ((def_offset == def_new) &&
+	    (deferred_error_int_vector != amd_deferred_error_interrupt))
+		deferred_error_int_vector = amd_deferred_error_interrupt;
+
+	low = (low & ~MASK_DEF_INT_TYPE) | DEF_INT_TYPE_APIC;
+	wrmsr(MSR_CU_DEF_ERR, low, high);
+}
+
 /* cpu init entry point, called from mce.c with preempt off */
 void mce_amd_feature_init(struct cpuinfo_x86 *c)
 {
@@ -252,7 +294,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 
 			b.interrupt_enable = 1;
 			new	= (high & MASK_LVTOFF_HI) >> 20;
-			offset  = setup_APIC_mce(offset, new);
+			offset  = setup_APIC_mce_threshold(offset, new);
 
 			if ((offset == new) &&
 			    (mce_threshold_vector != amd_threshold_interrupt))
@@ -262,6 +304,73 @@ init:
 			mce_threshold_block_init(&b, offset);
 		}
 	}
+
+	if (mce_flags.succor)
+		deferred_error_interrupt_enable(c);
+}
+
+static void __log_error(unsigned int bank, bool threshold_err, u64 misc)
+{
+	struct mce m;
+	u64 status;
+
+	rdmsrl(MSR_IA32_MCx_STATUS(bank), status);
+	if (!(status & MCI_STATUS_VAL))
+		return;
+
+	mce_setup(&m);
+
+	m.status = status;
+	m.bank = bank;
+
+	if (threshold_err)
+		m.misc = misc;
+
+	if (m.status & MCI_STATUS_ADDRV)
+		rdmsrl(MSR_IA32_MCx_ADDR(bank), m.addr);
+
+	mce_log(&m);
+	wrmsrl(MSR_IA32_MCx_STATUS(bank), 0);
+}
+
+static inline void __smp_deferred_error_interrupt(void)
+{
+	inc_irq_stat(irq_deferred_error_count);
+	deferred_error_int_vector();
+}
+
+asmlinkage __visible void smp_deferred_error_interrupt(void)
+{
+	entering_irq();
+	__smp_deferred_error_interrupt();
+	exiting_ack_irq();
+}
+
+asmlinkage __visible void smp_trace_deferred_error_interrupt(void)
+{
+	entering_irq();
+	trace_deferred_error_apic_entry(DEFERRED_ERROR_VECTOR);
+	__smp_deferred_error_interrupt();
+	trace_deferred_error_apic_exit(DEFERRED_ERROR_VECTOR);
+	exiting_ack_irq();
+}
+
+/* APIC interrupt handler for deferred errors */
+static void amd_deferred_error_interrupt(void)
+{
+	u64 status;
+	unsigned int bank;
+
+	for (bank = 0; bank < mca_cfg.banks; ++bank) {
+		rdmsrl(MSR_IA32_MCx_STATUS(bank), status);
+
+		if (!(status & MCI_STATUS_VAL) ||
+		    !(status & MCI_STATUS_DEFERRED))
+			continue;
+
+		__log_error(bank, false, 0);
+		break;
+	}
 }
 
 /*
@@ -273,12 +382,12 @@ init:
  * the interrupt goes off when error_count reaches threshold_limit.
  * the handler will simply log mcelog w/ software defined bank number.
  */
+
 static void amd_threshold_interrupt(void)
 {
 	u32 low = 0, high = 0, address = 0;
 	int cpu = smp_processor_id();
 	unsigned int bank, block;
-	struct mce m;
 
 	/* assume first bank caused it */
 	for (bank = 0; bank < mca_cfg.banks; ++bank) {
@@ -321,15 +430,7 @@ static void amd_threshold_interrupt(void)
 	return;
 
 log:
-	mce_setup(&m);
-	rdmsrl(MSR_IA32_MCx_STATUS(bank), m.status);
-	if (!(m.status & MCI_STATUS_VAL))
-		return;
-	m.misc = ((u64)high << 32) | low;
-	m.bank = bank;
-	mce_log(&m);
-
-	wrmsrl(MSR_IA32_MCx_STATUS(bank), 0);
+	__log_error(bank, true, ((u64)high << 32) | low);
 }
 
 /*