Merge branch 'linus' into x86/mm

Merge reason: refresh the topic: there's been 290 non-merges commits upstream
              to arch/x86 alone.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

20 files changed, 1027 insertions, 764 deletions

diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig
index 65792c2..52c8398 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig
+++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
@@ -87,30 +87,15 @@ config X86_POWERNOW_K7_ACPI
 config X86_POWERNOW_K8
 	tristate "AMD Opteron/Athlon64 PowerNow!"
 	select CPU_FREQ_TABLE
+	depends on ACPI && ACPI_PROCESSOR
 	help
-	  This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
+	  This adds the CPUFreq driver for K8/K10 Opteron/Athlon64 processors.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called powernow-k8.
 
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
-	  If in doubt, say N.
-
-config X86_POWERNOW_K8_ACPI
-	bool
-	prompt "ACPI Support" if X86_32
-	depends on ACPI && X86_POWERNOW_K8 && ACPI_PROCESSOR
-	depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
-	default y
-	help
-	  This provides access to the K8s Processor Performance States via ACPI.
-	  This driver is probably required for CPUFreq to work with multi-socket and
-	  SMP systems.  It is not required on at least some single-socket yet
-	  multi-core systems, even if SMP is enabled.
-
-	  It is safe to say Y here.
-
 config X86_GX_SUSPMOD
 	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
 	depends on X86_32 && PCI
diff --git a/arch/x86/kernel/cpu/cpufreq/Makefile b/arch/x86/kernel/cpu/cpufreq/Makefile
index 560f776..509296d 100644
--- a/arch/x86/kernel/cpu/cpufreq/Makefile
+++ b/arch/x86/kernel/cpu/cpufreq/Makefile
@@ -1,6 +1,11 @@
+# Link order matters. K8 is preferred to ACPI because of firmware bugs in early
+# K8 systems. ACPI is preferred to all other hardware-specific drivers.
+# speedstep-* is preferred over p4-clockmod.
+
+obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
+obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o
 obj-$(CONFIG_X86_POWERNOW_K6)		+= powernow-k6.o
 obj-$(CONFIG_X86_POWERNOW_K7)		+= powernow-k7.o
-obj-$(CONFIG_X86_POWERNOW_K8)		+= powernow-k8.o
 obj-$(CONFIG_X86_LONGHAUL)		+= longhaul.o
 obj-$(CONFIG_X86_E_POWERSAVER)		+= e_powersaver.o
 obj-$(CONFIG_ELAN_CPUFREQ)		+= elanfreq.o
@@ -10,7 +15,6 @@ obj-$(CONFIG_X86_GX_SUSPMOD)		+= gx-suspmod.o
 obj-$(CONFIG_X86_SPEEDSTEP_ICH)		+= speedstep-ich.o
 obj-$(CONFIG_X86_SPEEDSTEP_LIB)		+= speedstep-lib.o
 obj-$(CONFIG_X86_SPEEDSTEP_SMI)		+= speedstep-smi.o
-obj-$(CONFIG_X86_ACPI_CPUFREQ)		+= acpi-cpufreq.o
 obj-$(CONFIG_X86_SPEEDSTEP_CENTRINO)	+= speedstep-centrino.o
 obj-$(CONFIG_X86_P4_CLOCKMOD)		+= p4-clockmod.o
 obj-$(CONFIG_X86_CPUFREQ_NFORCE2)	+= cpufreq-nforce2.o
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 22590cf..ecdb682 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -1,5 +1,5 @@
 /*
- * acpi-cpufreq.c - ACPI Processor P-States Driver ($Revision: 1.4 $)
+ * acpi-cpufreq.c - ACPI Processor P-States Driver
  *
  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
@@ -33,19 +33,21 @@
 #include <linux/cpufreq.h>
 #include <linux/compiler.h>
 #include <linux/dmi.h>
-#include <linux/ftrace.h>
+#include <trace/power.h>
 
 #include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+
 #include <acpi/processor.h>
 
-#include <asm/io.h>
 #include <asm/msr.h>
 #include <asm/processor.h>
 #include <asm/cpufeature.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"acpi-cpufreq", msg)
 
 MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
 MODULE_DESCRIPTION("ACPI Processor P-States Driver");
@@ -66,10 +68,13 @@ struct acpi_cpufreq_data {
 	unsigned int max_freq;
 	unsigned int resume;
 	unsigned int cpu_feature;
+	u64 saved_aperf, saved_mperf;
 };
 
 static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data);
 
+DEFINE_TRACE(power_mark);
+
 /* acpi_perf_data is a pointer to percpu data. */
 static struct acpi_processor_performance *acpi_perf_data;
 
@@ -95,7 +100,7 @@ static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
 
 	perf = data->acpi_data;
 
-	for (i=0; i<perf->state_count; i++) {
+	for (i = 0; i < perf->state_count; i++) {
 		if (value == perf->states[i].status)
 			return data->freq_table[i].frequency;
 	}
@@ -110,7 +115,7 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
 	msr &= INTEL_MSR_RANGE;
 	perf = data->acpi_data;
 
-	for (i=0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+	for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
 		if (msr == perf->states[data->freq_table[i].index].status)
 			return data->freq_table[i].frequency;
 	}
@@ -138,19 +143,18 @@ struct io_addr {
 	u8 bit_width;
 };
 
-typedef union {
-	struct msr_addr msr;
-	struct io_addr io;
-} drv_addr_union;
-
 struct drv_cmd {
 	unsigned int type;
 	const struct cpumask *mask;
-	drv_addr_union addr;
+	union {
+		struct msr_addr msr;
+		struct io_addr io;
+	} addr;
 	u32 val;
 };
 
-static long do_drv_read(void *_cmd)
+/* Called via smp_call_function_single(), on the target CPU */
+static void do_drv_read(void *_cmd)
 {
 	struct drv_cmd *cmd = _cmd;
 	u32 h;
@@ -167,10 +171,10 @@ static long do_drv_read(void *_cmd)
 	default:
 		break;
 	}
-	return 0;
 }
 
-static long do_drv_write(void *_cmd)
+/* Called via smp_call_function_many(), on the target CPUs */
+static void do_drv_write(void *_cmd)
 {
 	struct drv_cmd *cmd = _cmd;
 	u32 lo, hi;
@@ -189,23 +193,24 @@ static long do_drv_write(void *_cmd)
 	default:
 		break;
 	}
-	return 0;
 }
 
 static void drv_read(struct drv_cmd *cmd)
 {
 	cmd->val = 0;
 
-	work_on_cpu(cpumask_any(cmd->mask), do_drv_read, cmd);
+	smp_call_function_single(cpumask_any(cmd->mask), do_drv_read, cmd, 1);
 }
 
 static void drv_write(struct drv_cmd *cmd)
 {
-	unsigned int i;
+	int this_cpu;
 
-	for_each_cpu(i, cmd->mask) {
-		work_on_cpu(i, do_drv_write, cmd);
-	}
+	this_cpu = get_cpu();
+	if (cpumask_test_cpu(this_cpu, cmd->mask))
+		do_drv_write(cmd);
+	smp_call_function_many(cmd->mask, do_drv_write, cmd, 1);
+	put_cpu();
 }
 
 static u32 get_cur_val(const struct cpumask *mask)
@@ -239,28 +244,23 @@ static u32 get_cur_val(const struct cpumask *mask)
 	return cmd.val;
 }
 
-struct perf_cur {
+struct perf_pair {
 	union {
 		struct {
 			u32 lo;
 			u32 hi;
 		} split;
 		u64 whole;
-	} aperf_cur, mperf_cur;
+	} aperf, mperf;
 };
 
-
-static long read_measured_perf_ctrs(void *_cur)
+/* Called via smp_call_function_single(), on the target CPU */
+static void read_measured_perf_ctrs(void *_cur)
 {
-	struct perf_cur *cur = _cur;
-
-	rdmsr(MSR_IA32_APERF, cur->aperf_cur.split.lo, cur->aperf_cur.split.hi);
-	rdmsr(MSR_IA32_MPERF, cur->mperf_cur.split.lo, cur->mperf_cur.split.hi);
+	struct perf_pair *cur = _cur;
 
-	wrmsr(MSR_IA32_APERF, 0, 0);
-	wrmsr(MSR_IA32_MPERF, 0, 0);
-
-	return 0;
+	rdmsr(MSR_IA32_APERF, cur->aperf.split.lo, cur->aperf.split.hi);
+	rdmsr(MSR_IA32_MPERF, cur->mperf.split.lo, cur->mperf.split.hi);
 }
 
 /*
@@ -279,52 +279,57 @@ static long read_measured_perf_ctrs(void *_cur)
 static unsigned int get_measured_perf(struct cpufreq_policy *policy,
 				      unsigned int cpu)
 {
-	struct perf_cur cur;
+	struct perf_pair readin, cur;
 	unsigned int perf_percent;
 	unsigned int retval;
 
-	if (!work_on_cpu(cpu, read_measured_perf_ctrs, &cur))
+	if (smp_call_function_single(cpu, read_measured_perf_ctrs, &readin, 1))
 		return 0;
 
+	cur.aperf.whole = readin.aperf.whole -
+				per_cpu(drv_data, cpu)->saved_aperf;
+	cur.mperf.whole = readin.mperf.whole -
+				per_cpu(drv_data, cpu)->saved_mperf;
+	per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole;
+	per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole;
+
 #ifdef __i386__
 	/*
 	 * We dont want to do 64 bit divide with 32 bit kernel
 	 * Get an approximate value. Return failure in case we cannot get
 	 * an approximate value.
 	 */
-	if (unlikely(cur.aperf_cur.split.hi || cur.mperf_cur.split.hi)) {
+	if (unlikely(cur.aperf.split.hi || cur.mperf.split.hi)) {
 		int shift_count;
 		u32 h;
 
-		h = max_t(u32, cur.aperf_cur.split.hi, cur.mperf_cur.split.hi);
+		h = max_t(u32, cur.aperf.split.hi, cur.mperf.split.hi);
 		shift_count = fls(h);
 
-		cur.aperf_cur.whole >>= shift_count;
-		cur.mperf_cur.whole >>= shift_count;
+		cur.aperf.whole >>= shift_count;
+		cur.mperf.whole >>= shift_count;
 	}
 
-	if (((unsigned long)(-1) / 100) < cur.aperf_cur.split.lo) {
+	if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) {
 		int shift_count = 7;
-		cur.aperf_cur.split.lo >>= shift_count;
-		cur.mperf_cur.split.lo >>= shift_count;
+		cur.aperf.split.lo >>= shift_count;
+		cur.mperf.split.lo >>= shift_count;
 	}
 
-	if (cur.aperf_cur.split.lo && cur.mperf_cur.split.lo)
-		perf_percent = (cur.aperf_cur.split.lo * 100) /
-				cur.mperf_cur.split.lo;
+	if (cur.aperf.split.lo && cur.mperf.split.lo)
+		perf_percent = (cur.aperf.split.lo * 100) / cur.mperf.split.lo;
 	else
 		perf_percent = 0;
 
 #else
-	if (unlikely(((unsigned long)(-1) / 100) < cur.aperf_cur.whole)) {
+	if (unlikely(((unsigned long)(-1) / 100) < cur.aperf.whole)) {
 		int shift_count = 7;
-		cur.aperf_cur.whole >>= shift_count;
-		cur.mperf_cur.whole >>= shift_count;
+		cur.aperf.whole >>= shift_count;
+		cur.mperf.whole >>= shift_count;
 	}
 
-	if (cur.aperf_cur.whole && cur.mperf_cur.whole)
-		perf_percent = (cur.aperf_cur.whole * 100) /
-				cur.mperf_cur.whole;
+	if (cur.aperf.whole && cur.mperf.whole)
+		perf_percent = (cur.aperf.whole * 100) / cur.mperf.whole;
 	else
 		perf_percent = 0;
 
@@ -369,7 +374,7 @@ static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
 	unsigned int cur_freq;
 	unsigned int i;
 
-	for (i=0; i<100; i++) {
+	for (i = 0; i < 100; i++) {
 		cur_freq = extract_freq(get_cur_val(mask), data);
 		if (cur_freq == freq)
 			return 1;
@@ -494,7 +499,7 @@ acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu)
 		unsigned long freq;
 		unsigned long freqn = perf->states[0].core_frequency * 1000;
 
-		for (i=0; i<(perf->state_count-1); i++) {
+		for (i = 0; i < (perf->state_count-1); i++) {
 			freq = freqn;
 			freqn = perf->states[i+1].core_frequency * 1000;
 			if ((2 * cpu_khz) > (freqn + freq)) {
@@ -673,17 +678,29 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	/* detect transition latency */
 	policy->cpuinfo.transition_latency = 0;
-	for (i=0; i<perf->state_count; i++) {
+	for (i = 0; i < perf->state_count; i++) {
 		if ((perf->states[i].transition_latency * 1000) >
 		    policy->cpuinfo.transition_latency)
 			policy->cpuinfo.transition_latency =
 			    perf->states[i].transition_latency * 1000;
 	}
 
+	/* Check for high latency (>20uS) from buggy BIOSes, like on T42 */
+	if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
+	    policy->cpuinfo.transition_latency > 20 * 1000) {
+		static int print_once;
+		policy->cpuinfo.transition_latency = 20 * 1000;
+		if (!print_once) {
+			print_once = 1;
+			printk(KERN_INFO "Capping off P-state tranision latency"
+				" at 20 uS\n");
+		}
+	}
+
 	data->max_freq = perf->states[0].core_frequency * 1000;
 	/* table init */
-	for (i=0; i<perf->state_count; i++) {
-		if (i>0 && perf->states[i].core_frequency >=
+	for (i = 0; i < perf->state_count; i++) {
+		if (i > 0 && perf->states[i].core_frequency >=
 		    data->freq_table[valid_states-1].frequency / 1000)
 			continue;
 
diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
index 965ea52..733093d 100644
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -32,7 +32,7 @@
  * nforce2_chipset:
  * FSB is changed using the chipset
  */
-static struct pci_dev *nforce2_chipset_dev;
+static struct pci_dev *nforce2_dev;
 
 /* fid:
  * multiplier * 10
@@ -56,7 +56,9 @@ MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
 MODULE_PARM_DESC(min_fsb,
 		"Minimum FSB to use, if not defined: current FSB - 50");
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg)
+#define PFX "cpufreq-nforce2: "
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"cpufreq-nforce2", msg)
 
 /**
  * nforce2_calc_fsb - calculate FSB
@@ -118,11 +120,11 @@ static void nforce2_write_pll(int pll)
 	int temp;
 
 	/* Set the pll addr. to 0x00 */
-	pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLADR, 0);
+	pci_write_config_dword(nforce2_dev, NFORCE2_PLLADR, 0);
 
 	/* Now write the value in all 64 registers */
 	for (temp = 0; temp <= 0x3f; temp++)
-		pci_write_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, pll);
+		pci_write_config_dword(nforce2_dev, NFORCE2_PLLREG, pll);
 
 	return;
 }
@@ -139,8 +141,8 @@ static unsigned int nforce2_fsb_read(int bootfsb)
 	u32 fsb, temp = 0;
 
 	/* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
-	nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
-						0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL);
+	nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA, 0x01EF,
+				PCI_ANY_ID, PCI_ANY_ID, NULL);
 	if (!nforce2_sub5)
 		return 0;
 
@@ -148,13 +150,13 @@ static unsigned int nforce2_fsb_read(int bootfsb)
 	fsb /= 1000000;
 
 	/* Check if PLL register is already set */
-	pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
+	pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
 
 	if (bootfsb || !temp)
 		return fsb;
 
 	/* Use PLL register FSB value */
-	pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp);
+	pci_read_config_dword(nforce2_dev, NFORCE2_PLLREG, &temp);
 	fsb = nforce2_calc_fsb(temp);
 
 	return fsb;
@@ -174,18 +176,18 @@ static int nforce2_set_fsb(unsigned int fsb)
 	int pll = 0;
 
 	if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
-		printk(KERN_ERR "cpufreq: FSB %d is out of range!\n", fsb);
+		printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb);
 		return -EINVAL;
 	}
 
 	tfsb = nforce2_fsb_read(0);
 	if (!tfsb) {
-		printk(KERN_ERR "cpufreq: Error while reading the FSB\n");
+		printk(KERN_ERR PFX "Error while reading the FSB\n");
 		return -EINVAL;
 	}
 
 	/* First write? Then set actual value */
-	pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
+	pci_read_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
 	if (!temp) {
 		pll = nforce2_calc_pll(tfsb);
 
@@ -197,7 +199,7 @@ static int nforce2_set_fsb(unsigned int fsb)
 
 	/* Enable write access */
 	temp = 0x01;
-	pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8)temp);
+	pci_write_config_byte(nforce2_dev, NFORCE2_PLLENABLE, (u8)temp);
 
 	diff = tfsb - fsb;
 
@@ -222,7 +224,7 @@ static int nforce2_set_fsb(unsigned int fsb)
 	}
 
 	temp = 0x40;
-	pci_write_config_byte(nforce2_chipset_dev, NFORCE2_PLLADR, (u8)temp);
+	pci_write_config_byte(nforce2_dev, NFORCE2_PLLADR, (u8)temp);
 
 	return 0;
 }
@@ -244,7 +246,8 @@ static unsigned int nforce2_get(unsigned int cpu)
  * nforce2_target - set a new CPUFreq policy
  * @policy: new policy
  * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ * @relation: how that frequency relates to achieved frequency
+ *  (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
  *
  * Sets a new CPUFreq policy.
  */
@@ -276,7 +279,7 @@ static int nforce2_target(struct cpufreq_policy *policy,
 	/* local_irq_save(flags); */
 
 	if (nforce2_set_fsb(target_fsb) < 0)
-		printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n",
+		printk(KERN_ERR PFX "Changing FSB to %d failed\n",
 			target_fsb);
 	else
 		dprintk("Changed FSB successfully to %d\n",
@@ -327,8 +330,8 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 	/* FIX: Get FID from CPU */
 	if (!fid) {
 		if (!cpu_khz) {
-			printk(KERN_WARNING
-			       "cpufreq: cpu_khz not set, can't calculate multiplier!\n");
+			printk(KERN_WARNING PFX
+			"cpu_khz not set, can't calculate multiplier!\n");
 			return -ENODEV;
 		}
 
@@ -343,7 +346,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 		}
 	}
 
-	printk(KERN_INFO "cpufreq: FSB currently at %i MHz, FID %d.%d\n", fsb,
+	printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb,
 	       fid / 10, fid % 10);
 
 	/* Set maximum FSB to FSB at boot time */
@@ -392,17 +395,18 @@ static struct cpufreq_driver nforce2_driver = {
  */
 static unsigned int nforce2_detect_chipset(void)
 {
-	nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
+	nforce2_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
 					PCI_DEVICE_ID_NVIDIA_NFORCE2,
 					PCI_ANY_ID, PCI_ANY_ID, NULL);
 
-	if (nforce2_chipset_dev == NULL)
+	if (nforce2_dev == NULL)
 		return -ENODEV;
 
-	printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n",
-	       nforce2_chipset_dev->revision);
-	printk(KERN_INFO
-	       "cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n");
+	printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n",
+	       nforce2_dev->revision);
+	printk(KERN_INFO PFX
+	       "FSB changing is maybe unstable and can lead to "
+	       "crashes and data loss.\n");
 
 	return 0;
 }
@@ -420,7 +424,7 @@ static int __init nforce2_init(void)
 
 	/* detect chipset */
 	if (nforce2_detect_chipset()) {
-		printk(KERN_ERR "cpufreq: No nForce2 chipset.\n");
+		printk(KERN_INFO PFX "No nForce2 chipset.\n");
 		return -ENODEV;
 	}
 
diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
index 41ab3f0..35a257d 100644
--- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
+++ b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
@@ -12,12 +12,12 @@
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+#include <linux/delay.h>
 
 #include <asm/msr.h>
 #include <asm/tsc.h>
-#include <asm/timex.h>
-#include <asm/io.h>
-#include <asm/delay.h>
 
 #define EPS_BRAND_C7M	0
 #define EPS_BRAND_C7	1
@@ -184,7 +184,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 		break;
 	}
 
-	switch(brand) {
+	switch (brand) {
 	case EPS_BRAND_C7M:
 		printk(KERN_CONT "C7-M\n");
 		break;
@@ -218,17 +218,20 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 	/* Print voltage and multiplier */
 	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
 	current_voltage = lo & 0xff;
-	printk(KERN_INFO "eps: Current voltage = %dmV\n", current_voltage * 16 + 700);
+	printk(KERN_INFO "eps: Current voltage = %dmV\n",
+			current_voltage * 16 + 700);
 	current_multiplier = (lo >> 8) & 0xff;
 	printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier);
 
 	/* Print limits */
 	max_voltage = hi & 0xff;
-	printk(KERN_INFO "eps: Highest voltage = %dmV\n", max_voltage * 16 + 700);
+	printk(KERN_INFO "eps: Highest voltage = %dmV\n",
+			max_voltage * 16 + 700);
 	max_multiplier = (hi >> 8) & 0xff;
 	printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier);
 	min_voltage = (hi >> 16) & 0xff;
-	printk(KERN_INFO "eps: Lowest voltage = %dmV\n", min_voltage * 16 + 700);
+	printk(KERN_INFO "eps: Lowest voltage = %dmV\n",
+			min_voltage * 16 + 700);
 	min_multiplier = (hi >> 24) & 0xff;
 	printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier);
 
@@ -318,7 +321,7 @@ static int eps_cpu_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct freq_attr* eps_attr[] = {
+static struct freq_attr *eps_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -356,7 +359,7 @@ static void __exit eps_exit(void)
 	cpufreq_unregister_driver(&eps_driver);
 }
 
-MODULE_AUTHOR("Rafał Bilski <rafalbilski@interia.pl>");
+MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>");
 MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
 MODULE_LICENSE("GPL");
 
diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
index fe613c9..006b278 100644
--- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c
@@ -184,7 +184,8 @@ static int elanfreq_target(struct cpufreq_policy *policy,
 {
 	unsigned int newstate = 0;
 
-	if (cpufreq_frequency_table_target(policy, &elanfreq_table[0], target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, &elanfreq_table[0],
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	elanfreq_set_cpu_state(newstate);
@@ -301,7 +302,8 @@ static void __exit elanfreq_exit(void)
 module_param(max_freq, int, 0444);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>");
+MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, "
+		"Sven Geggus <sven@geggus.net>");
 MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
 
 module_init(elanfreq_init);
diff --git a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
index 9d9eae8..ac27ec2 100644
--- a/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/gx-suspmod.c
@@ -79,8 +79,9 @@
 #include <linux/smp.h>
 #include <linux/cpufreq.h>
 #include <linux/pci.h>
+#include <linux/errno.h>
+
 #include <asm/processor-cyrix.h>
-#include <asm/errno.h>
 
 /* PCI config registers, all at F0 */
 #define PCI_PMER1	0x80	/* power management enable register 1 */
@@ -122,8 +123,8 @@ static struct gxfreq_params *gx_params;
 static int stock_freq;
 
 /* PCI bus clock - defaults to 30.000 if cpu_khz is not available */
-static int pci_busclk = 0;
-module_param (pci_busclk, int, 0444);
+static int pci_busclk;
+module_param(pci_busclk, int, 0444);
 
 /* maximum duration for which the cpu may be suspended
  * (32us * MAX_DURATION). If no parameter is given, this defaults
@@ -132,7 +133,7 @@ module_param (pci_busclk, int, 0444);
  * is suspended -- processing power is just 0.39% of what it used to be,
  * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */
 static int max_duration = 255;
-module_param (max_duration, int, 0444);
+module_param(max_duration, int, 0444);
 
 /* For the default policy, we want at least some processing power
  * - let's say 5%. (min = maxfreq / POLICY_MIN_DIV)
@@ -140,7 +141,8 @@ module_param (max_duration, int, 0444);
 #define POLICY_MIN_DIV 20
 
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"gx-suspmod", msg)
 
 /**
  * we can detect a core multipiler from dir0_lsb
@@ -166,12 +168,20 @@ static int gx_freq_mult[16] = {
  *	Low Level chipset interface				*
  ****************************************************************/
 static struct pci_device_id gx_chipset_tbl[] __initdata = {
-	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID },
-	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID },
+	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520,
+		PCI_ANY_ID, PCI_ANY_ID },
+	{ PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510,
+		PCI_ANY_ID, PCI_ANY_ID },
 	{ 0, },
 };
 
+static void gx_write_byte(int reg, int value)
+{
+	pci_write_config_byte(gx_params->cs55x0, reg, value);
+}
+
 /**
  * gx_detect_chipset:
  *
@@ -200,7 +210,8 @@ static __init struct pci_dev *gx_detect_chipset(void)
 /**
  * gx_get_cpuspeed:
  *
- * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs.
+ * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi
+ * Geode CPU runs.
  */
 static unsigned int gx_get_cpuspeed(unsigned int cpu)
 {
@@ -217,17 +228,18 @@ static unsigned int gx_get_cpuspeed(unsigned int cpu)
  *
  **/
 
-static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration)
+static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration,
+		u8 *off_duration)
 {
 	unsigned int i;
 	u8 tmp_on, tmp_off;
 	int old_tmp_freq = stock_freq;
 	int tmp_freq;
 
-	*off_duration=1;
-	*on_duration=0;
+	*off_duration = 1;
+	*on_duration = 0;
 
-	for (i=max_duration; i>0; i--) {
+	for (i = max_duration; i > 0; i--) {
 		tmp_off = ((khz * i) / stock_freq) & 0xff;
 		tmp_on = i - tmp_off;
 		tmp_freq = (stock_freq * tmp_off) / i;
@@ -259,26 +271,34 @@ static void gx_set_cpuspeed(unsigned int khz)
 	freqs.cpu = 0;
 	freqs.old = gx_get_cpuspeed(0);
 
-	new_khz = gx_validate_speed(khz, &gx_params->on_duration, &gx_params->off_duration);
+	new_khz = gx_validate_speed(khz, &gx_params->on_duration,
+			&gx_params->off_duration);
 
 	freqs.new = new_khz;
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	local_irq_save(flags);
 
-	if (new_khz != stock_freq) {  /* if new khz == 100% of CPU speed, it is special case */
+
+
+	if (new_khz != stock_freq) {
+		/* if new khz == 100% of CPU speed, it is special case */
 		switch (gx_params->cs55x0->device) {
 		case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
 			pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP;
 			/* FIXME: need to test other values -- Zwane,Miura */
-			pci_write_config_byte(gx_params->cs55x0, PCI_IRQTC, 4); /* typical 2 to 4ms */
-			pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */
-			pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1);
-
-			if (gx_params->cs55x0->revision < 0x10) {   /* CS5530(rev 1.2, 1.3) */
-				suscfg = gx_params->pci_suscfg | SUSMOD;
-			} else {                           /* CS5530A,B.. */
-				suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE;
+			/* typical 2 to 4ms */
+			gx_write_byte(PCI_IRQTC, 4);
+			/* typical 50 to 100ms */
+			gx_write_byte(PCI_VIDTC, 100);
+			gx_write_byte(PCI_PMER1, pmer1);
+
+			if (gx_params->cs55x0->revision < 0x10) {
+				/* CS5530(rev 1.2, 1.3) */
+				suscfg = gx_params->pci_suscfg|SUSMOD;
+			} else {
+				/* CS5530A,B.. */
+				suscfg = gx_params->pci_suscfg|SUSMOD|PWRSVE;
 			}
 			break;
 		case PCI_DEVICE_ID_CYRIX_5520:
@@ -294,13 +314,13 @@ static void gx_set_cpuspeed(unsigned int khz)
 		suscfg = gx_params->pci_suscfg & ~(SUSMOD);
 		gx_params->off_duration = 0;
 		gx_params->on_duration = 0;
-		dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n");
+		dprintk("suspend modulation disabled: cpu runs 100%% speed.\n");
 	}
 
-	pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration);
-	pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration);
+	gx_write_byte(PCI_MODOFF, gx_params->off_duration);
+	gx_write_byte(PCI_MODON, gx_params->on_duration);
 
-	pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg);
+	gx_write_byte(PCI_SUSCFG, suscfg);
 	pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg);
 
 	local_irq_restore(flags);
@@ -334,7 +354,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
 		return -EINVAL;
 
 	policy->cpu = 0;
-	cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
+	cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
+			stock_freq);
 
 	/* it needs to be assured that at least one supported frequency is
 	 * within policy->min and policy->max. If it is not, policy->max
@@ -354,7 +375,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy)
 	policy->max = tmp_freq;
 	if (policy->max < policy->min)
 		policy->max = policy->min;
-	cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq);
+	cpufreq_verify_within_limits(policy, (stock_freq / max_duration),
+			stock_freq);
 
 	return 0;
 }
@@ -398,18 +420,18 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy)
 		return -ENODEV;
 
 	/* determine maximum frequency */
-	if (pci_busclk) {
+	if (pci_busclk)
 		maxfreq = pci_busclk * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
-	} else if (cpu_khz) {
+	else if (cpu_khz)
 		maxfreq = cpu_khz;
-	} else {
+	else
 		maxfreq = 30000 * gx_freq_mult[getCx86(CX86_DIR1) & 0x0f];
-	}
+
 	stock_freq = maxfreq;
 	curfreq = gx_get_cpuspeed(0);
 
 	dprintk("cpu max frequency is %d.\n", maxfreq);
-	dprintk("cpu current frequency is %dkHz.\n",curfreq);
+	dprintk("cpu current frequency is %dkHz.\n", curfreq);
 
 	/* setup basic struct for cpufreq API */
 	policy->cpu = 0;
@@ -447,7 +469,8 @@ static int __init cpufreq_gx_init(void)
 	struct pci_dev *gx_pci;
 
 	/* Test if we have the right hardware */
-	if ((gx_pci = gx_detect_chipset()) == NULL)
+	gx_pci = gx_detect_chipset();
+	if (gx_pci == NULL)
 		return -ENODEV;
 
 	/* check whether module parameters are sane */
@@ -468,9 +491,11 @@ static int __init cpufreq_gx_init(void)
 	pci_read_config_byte(params->cs55x0, PCI_PMER1, &(params->pci_pmer1));
 	pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
 	pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
-	pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
+	pci_read_config_byte(params->cs55x0, PCI_MODOFF,
+			&(params->off_duration));
 
-	if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
+	ret = cpufreq_register_driver(&gx_suspmod_driver);
+	if (ret) {
 		kfree(params);
 		return ret;                   /* register error! */
 	}
@@ -485,9 +510,9 @@ static void __exit cpufreq_gx_exit(void)
 	kfree(gx_params);
 }
 
-MODULE_AUTHOR ("Hiroshi Miura <miura@da-cha.org>");
-MODULE_DESCRIPTION ("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Hiroshi Miura <miura@da-cha.org>");
+MODULE_DESCRIPTION("Cpufreq driver for Cyrix MediaGX and NatSemi Geode");
+MODULE_LICENSE("GPL");
 
 module_init(cpufreq_gx_init);
 module_exit(cpufreq_gx_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c
index a4cff5d..ce2ed3e 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c
@@ -30,12 +30,11 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/delay.h>
+#include <linux/timex.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
 
 #include <asm/msr.h>
-#include <asm/timex.h>
-#include <asm/io.h>
-#include <asm/acpi.h>
-#include <linux/acpi.h>
 #include <acpi/processor.h>
 
 #include "longhaul.h"
@@ -58,7 +57,7 @@
 #define USE_NORTHBRIDGE		(1 << 2)
 
 static int cpu_model;
-static unsigned int numscales=16;
+static unsigned int numscales = 16;
 static unsigned int fsb;
 
 static const struct mV_pos *vrm_mV_table;
@@ -67,8 +66,8 @@ static const unsigned char *mV_vrm_table;
 static unsigned int highest_speed, lowest_speed; /* kHz */
 static unsigned int minmult, maxmult;
 static int can_scale_voltage;
-static struct acpi_processor *pr = NULL;
-static struct acpi_processor_cx *cx = NULL;
+static struct acpi_processor *pr;
+static struct acpi_processor_cx *cx;
 static u32 acpi_regs_addr;
 static u8 longhaul_flags;
 static unsigned int longhaul_index;
@@ -78,12 +77,13 @@ static int scale_voltage;
 static int disable_acpi_c3;
 static int revid_errata;
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"longhaul", msg)
 
 
 /* Clock ratios multiplied by 10 */
-static int clock_ratio[32];
-static int eblcr_table[32];
+static int mults[32];
+static int eblcr[32];
 static int longhaul_version;
 static struct cpufreq_frequency_table *longhaul_table;
 
@@ -93,7 +93,7 @@ static char speedbuffer[8];
 static char *print_speed(int speed)
 {
 	if (speed < 1000) {
-		snprintf(speedbuffer, sizeof(speedbuffer),"%dMHz", speed);
+		snprintf(speedbuffer, sizeof(speedbuffer), "%dMHz", speed);
 		return speedbuffer;
 	}
 
@@ -122,27 +122,28 @@ static unsigned int calc_speed(int mult)
 
 static int longhaul_get_cpu_mult(void)
 {
-	unsigned long invalue=0,lo, hi;
+	unsigned long invalue = 0, lo, hi;
 
-	rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
-	invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22;
-	if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) {
+	rdmsr(MSR_IA32_EBL_CR_POWERON, lo, hi);
+	invalue = (lo & (1<<22|1<<23|1<<24|1<<25))>>22;
+	if (longhaul_version == TYPE_LONGHAUL_V2 ||
+	    longhaul_version == TYPE_POWERSAVER) {
 		if (lo & (1<<27))
-			invalue+=16;
+			invalue += 16;
 	}
-	return eblcr_table[invalue];
+	return eblcr[invalue];
 }
 
 /* For processor with BCR2 MSR */
 
-static void do_longhaul1(unsigned int clock_ratio_index)
+static void do_longhaul1(unsigned int mults_index)
 {
 	union msr_bcr2 bcr2;
 
 	rdmsrl(MSR_VIA_BCR2, bcr2.val);
 	/* Enable software clock multiplier */
 	bcr2.bits.ESOFTBF = 1;
-	bcr2.bits.CLOCKMUL = clock_ratio_index & 0xff;
+	bcr2.bits.CLOCKMUL = mults_index & 0xff;
 
 	/* Sync to timer tick */
 	safe_halt();
@@ -161,7 +162,7 @@ static void do_longhaul1(unsigned int clock_ratio_index)
 
 /* For processor with Longhaul MSR */
 
-static void do_powersaver(int cx_address, unsigned int clock_ratio_index,
+static void do_powersaver(int cx_address, unsigned int mults_index,
 			  unsigned int dir)
 {
 	union msr_longhaul longhaul;
@@ -173,11 +174,11 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index,
 		longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
 	else
 		longhaul.bits.RevisionKey = 0;
-	longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf;
-	longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
+	longhaul.bits.SoftBusRatio = mults_index & 0xf;
+	longhaul.bits.SoftBusRatio4 = (mults_index & 0x10) >> 4;
 	/* Setup new voltage */
 	if (can_scale_voltage)
-		longhaul.bits.SoftVID = (clock_ratio_index >> 8) & 0x1f;
+		longhaul.bits.SoftVID = (mults_index >> 8) & 0x1f;
 	/* Sync to timer tick */
 	safe_halt();
 	/* Raise voltage if necessary */
@@ -240,14 +241,14 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index,
 
 /**
  * longhaul_set_cpu_frequency()
- * @clock_ratio_index : bitpattern of the new multiplier.
+ * @mults_index : bitpattern of the new multiplier.
  *
  * Sets a new clock ratio.
  */
 
 static void longhaul_setstate(unsigned int table_index)
 {
-	unsigned int clock_ratio_index;
+	unsigned int mults_index;
 	int speed, mult;
 	struct cpufreq_freqs freqs;
 	unsigned long flags;
@@ -256,9 +257,9 @@ static void longhaul_setstate(unsigned int table_index)
 	u32 bm_timeout = 1000;
 	unsigned int dir = 0;
 
-	clock_ratio_index = longhaul_table[table_index].index;
+	mults_index = longhaul_table[table_index].index;
 	/* Safety precautions */
-	mult = clock_ratio[clock_ratio_index & 0x1f];
+	mult = mults[mults_index & 0x1f];
 	if (mult == -1)
 		return;
 	speed = calc_speed(mult);
@@ -274,7 +275,7 @@ static void longhaul_setstate(unsigned int table_index)
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
-	dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
+	dprintk("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
 			fsb, mult/10, mult%10, print_speed(speed/1000));
 retry_loop:
 	preempt_disable();
@@ -282,8 +283,8 @@ retry_loop:
 
 	pic2_mask = inb(0xA1);
 	pic1_mask = inb(0x21);	/* works on C3. save mask. */
-	outb(0xFF,0xA1);	/* Overkill */
-	outb(0xFE,0x21);	/* TMR0 only */
+	outb(0xFF, 0xA1);	/* Overkill */
+	outb(0xFE, 0x21);	/* TMR0 only */
 
 	/* Wait while PCI bus is busy. */
 	if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE
@@ -303,7 +304,7 @@ retry_loop:
 		outb(3, 0x22);
 	} else if ((pr != NULL) && pr->flags.bm_control) {
 		/* Disable bus master arbitration */
-		acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
+		acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
 	}
 	switch (longhaul_version) {
 
@@ -312,7 +313,7 @@ retry_loop:
 	 * Software controlled multipliers only.
 	 */
 	case TYPE_LONGHAUL_V1:
-		do_longhaul1(clock_ratio_index);
+		do_longhaul1(mults_index);
 		break;
 
 	/*
@@ -326,10 +327,10 @@ retry_loop:
 	case TYPE_POWERSAVER:
 		if (longhaul_flags & USE_ACPI_C3) {
 			/* Don't allow wakeup */
-			acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
-			do_powersaver(cx->address, clock_ratio_index, dir);
+			acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
+			do_powersaver(cx->address, mults_index, dir);
 		} else {
-			do_powersaver(0, clock_ratio_index, dir);
+			do_powersaver(0, mults_index, dir);
 		}
 		break;
 	}
@@ -339,10 +340,10 @@ retry_loop:
 		outb(0, 0x22);
 	} else if ((pr != NULL) && pr->flags.bm_control) {
 		/* Enable bus master arbitration */
-		acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
+		acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
 	}
-	outb(pic2_mask,0xA1);	/* restore mask */
-	outb(pic1_mask,0x21);
+	outb(pic2_mask, 0xA1);	/* restore mask */
+	outb(pic1_mask, 0x21);
 
 	local_irq_restore(flags);
 	preempt_enable();
@@ -392,7 +393,8 @@ retry_loop:
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	if (!bm_timeout)
-		printk(KERN_INFO PFX "Warning: Timeout while waiting for idle PCI bus.\n");
+		printk(KERN_INFO PFX "Warning: Timeout while waiting for "
+				"idle PCI bus.\n");
 }
 
 /*
@@ -458,31 +460,32 @@ static int __init longhaul_get_ranges(void)
 		break;
 	}
 
-	dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n",
+	dprintk("MinMult:%d.%dx MaxMult:%d.%dx\n",
 		 minmult/10, minmult%10, maxmult/10, maxmult%10);
 
 	highest_speed = calc_speed(maxmult);
 	lowest_speed = calc_speed(minmult);
-	dprintk ("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
+	dprintk("FSB:%dMHz  Lowest speed: %s   Highest speed:%s\n", fsb,
 		 print_speed(lowest_speed/1000),
 		 print_speed(highest_speed/1000));
 
 	if (lowest_speed == highest_speed) {
-		printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n");
+		printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n");
 		return -EINVAL;
 	}
 	if (lowest_speed > highest_speed) {
-		printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
+		printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
 			lowest_speed, highest_speed);
 		return -EINVAL;
 	}
 
-	longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL);
-	if(!longhaul_table)
+	longhaul_table = kmalloc((numscales + 1) * sizeof(*longhaul_table),
+			GFP_KERNEL);
+	if (!longhaul_table)
 		return -ENOMEM;
 
 	for (j = 0; j < numscales; j++) {
-		ratio = clock_ratio[j];
+		ratio = mults[j];
 		if (ratio == -1)
 			continue;
 		if (ratio > maxmult || ratio < minmult)
@@ -507,13 +510,10 @@ static int __init longhaul_get_ranges(void)
 			}
 		}
 		if (min_i != j) {
-			unsigned int temp;
-			temp = longhaul_table[j].frequency;
-			longhaul_table[j].frequency = longhaul_table[min_i].frequency;
-			longhaul_table[min_i].frequency = temp;
-			temp = longhaul_table[j].index;
-			longhaul_table[j].index = longhaul_table[min_i].index;
-			longhaul_table[min_i].index = temp;
+			swap(longhaul_table[j].frequency,
+			     longhaul_table[min_i].frequency);
+			swap(longhaul_table[j].index,
+			     longhaul_table[min_i].index);
 		}
 	}
 
@@ -521,7 +521,7 @@ static int __init longhaul_get_ranges(void)
 
 	/* Find index we are running on */
 	for (j = 0; j < k; j++) {
-		if (clock_ratio[longhaul_table[j].index & 0x1f] == mult) {
+		if (mults[longhaul_table[j].index & 0x1f] == mult) {
 			longhaul_index = j;
 			break;
 		}
@@ -559,20 +559,22 @@ static void __init longhaul_setup_voltagescaling(void)
 	maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
 
 	if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
-		printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
+		printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
 					"Voltage scaling disabled.\n",
-					minvid.mV/1000, minvid.mV%1000, maxvid.mV/1000, maxvid.mV%1000);
+					minvid.mV/1000, minvid.mV%1000,
+					maxvid.mV/1000, maxvid.mV%1000);
 		return;
 	}
 
 	if (minvid.mV == maxvid.mV) {
-		printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are "
-				"both %d.%03d. Voltage scaling disabled\n",
+		printk(KERN_INFO PFX "Claims to support voltage scaling but "
+				"min & max are both %d.%03d. "
+				"Voltage scaling disabled\n",
 				maxvid.mV/1000, maxvid.mV%1000);
 		return;
 	}
 
-	/* How many voltage steps */
+	/* How many voltage steps*/
 	numvscales = maxvid.pos - minvid.pos + 1;
 	printk(KERN_INFO PFX
 		"Max VID=%d.%03d  "
@@ -586,7 +588,7 @@ static void __init longhaul_setup_voltagescaling(void)
 	j = longhaul.bits.MinMHzBR;
 	if (longhaul.bits.MinMHzBR4)
 		j += 16;
-	min_vid_speed = eblcr_table[j];
+	min_vid_speed = eblcr[j];
 	if (min_vid_speed == -1)
 		return;
 	switch (longhaul.bits.MinMHzFSB) {
@@ -617,7 +619,8 @@ static void __init longhaul_setup_voltagescaling(void)
 			pos = minvid.pos;
 		longhaul_table[j].index |= mV_vrm_table[pos] << 8;
 		vid = vrm_mV_table[mV_vrm_table[pos]];
-		printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV);
+		printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
+				speed, j, vid.mV);
 		j++;
 	}
 
@@ -640,7 +643,8 @@ static int longhaul_target(struct cpufreq_policy *policy,
 	unsigned int dir = 0;
 	u8 vid, current_vid;
 
-	if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index))
+	if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq,
+				relation, &table_index))
 		return -EINVAL;
 
 	/* Don't set same frequency again */
@@ -656,7 +660,8 @@ static int longhaul_target(struct cpufreq_policy *policy,
 		 * this in hardware, C3 is old and we need to do this
 		 * in software. */
 		i = longhaul_index;
-		current_vid = (longhaul_table[longhaul_index].index >> 8) & 0x1f;
+		current_vid = (longhaul_table[longhaul_index].index >> 8);
+		current_vid &= 0x1f;
 		if (table_index > longhaul_index)
 			dir = 1;
 		while (i != table_index) {
@@ -691,9 +696,9 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
 {
 	struct acpi_device *d;
 
-	if ( acpi_bus_get_device(obj_handle, &d) ) {
+	if (acpi_bus_get_device(obj_handle, &d))
 		return 0;
-	}
+
 	*return_value = acpi_driver_data(d);
 	return 1;
 }
@@ -750,7 +755,7 @@ static int longhaul_setup_southbridge(void)
 	/* Find VT8235 southbridge */
 	dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
 	if (dev == NULL)
-	/* Find VT8237 southbridge */
+		/* Find VT8237 southbridge */
 		dev = pci_get_device(PCI_VENDOR_ID_VIA,
 				     PCI_DEVICE_ID_VIA_8237, NULL);
 	if (dev != NULL) {
@@ -769,7 +774,8 @@ static int longhaul_setup_southbridge(void)
 		if (pci_cmd & 1 << 7) {
 			pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
 			acpi_regs_addr &= 0xff00;
-			printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", acpi_regs_addr);
+			printk(KERN_INFO PFX "ACPI I/O at 0x%x\n",
+					acpi_regs_addr);
 		}
 
 		pci_dev_put(dev);
@@ -781,7 +787,7 @@ static int longhaul_setup_southbridge(void)
 static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);
-	char *cpuname=NULL;
+	char *cpuname = NULL;
 	int ret;
 	u32 lo, hi;
 
@@ -791,8 +797,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 		cpu_model = CPU_SAMUEL;
 		cpuname = "C3 'Samuel' [C5A]";
 		longhaul_version = TYPE_LONGHAUL_V1;
-		memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
-		memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr));
+		memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
+		memcpy(eblcr, samuel1_eblcr, sizeof(samuel1_eblcr));
 		break;
 
 	case 7:
@@ -803,10 +809,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 			cpuname = "C3 'Samuel 2' [C5B]";
 			/* Note, this is not a typo, early Samuel2's had
 			 * Samuel1 ratios. */
-			memcpy(clock_ratio, samuel1_clock_ratio,
-				sizeof(samuel1_clock_ratio));
-			memcpy(eblcr_table, samuel2_eblcr,
-				sizeof(samuel2_eblcr));
+			memcpy(mults, samuel1_mults, sizeof(samuel1_mults));
+			memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr));
 			break;
 		case 1 ... 15:
 			longhaul_version = TYPE_LONGHAUL_V1;
@@ -817,10 +821,8 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 				cpu_model = CPU_EZRA;
 				cpuname = "C3 'Ezra' [C5C]";
 			}
-			memcpy(clock_ratio, ezra_clock_ratio,
-				sizeof(ezra_clock_ratio));
-			memcpy(eblcr_table, ezra_eblcr,
-				sizeof(ezra_eblcr));
+			memcpy(mults, ezra_mults, sizeof(ezra_mults));
+			memcpy(eblcr, ezra_eblcr, sizeof(ezra_eblcr));
 			break;
 		}
 		break;
@@ -829,18 +831,16 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 		cpu_model = CPU_EZRA_T;
 		cpuname = "C3 'Ezra-T' [C5M]";
 		longhaul_version = TYPE_POWERSAVER;
-		numscales=32;
-		memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio));
-		memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr));
+		numscales = 32;
+		memcpy(mults, ezrat_mults, sizeof(ezrat_mults));
+		memcpy(eblcr, ezrat_eblcr, sizeof(ezrat_eblcr));
 		break;
 
 	case 9:
 		longhaul_version = TYPE_POWERSAVER;
 		numscales = 32;
-		memcpy(clock_ratio,
-		       nehemiah_clock_ratio,
-		       sizeof(nehemiah_clock_ratio));
-		memcpy(eblcr_table, nehemiah_eblcr, sizeof(nehemiah_eblcr));
+		memcpy(mults, nehemiah_mults, sizeof(nehemiah_mults));
+		memcpy(eblcr, nehemiah_eblcr, sizeof(nehemiah_eblcr));
 		switch (c->x86_mask) {
 		case 0 ... 1:
 			cpu_model = CPU_NEHEMIAH;
@@ -869,14 +869,14 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
 			longhaul_version = TYPE_LONGHAUL_V1;
 	}
 
-	printk (KERN_INFO PFX "VIA %s CPU detected.  ", cpuname);
+	printk(KERN_INFO PFX "VIA %s CPU detected.  ", cpuname);
 	switch (longhaul_version) {
 	case TYPE_LONGHAUL_V1:
 	case TYPE_LONGHAUL_V2:
-		printk ("Longhaul v%d supported.\n", longhaul_version);
+		printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version);
 		break;
 	case TYPE_POWERSAVER:
-		printk ("Powersaver supported.\n");
+		printk(KERN_CONT "Powersaver supported.\n");
 		break;
 	};
 
@@ -940,7 +940,7 @@ static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct freq_attr* longhaul_attr[] = {
+static struct freq_attr *longhaul_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -966,13 +966,15 @@ static int __init longhaul_init(void)
 
 #ifdef CONFIG_SMP
 	if (num_online_cpus() > 1) {
-		printk(KERN_ERR PFX "More than 1 CPU detected, longhaul disabled.\n");
+		printk(KERN_ERR PFX "More than 1 CPU detected, "
+				"longhaul disabled.\n");
 		return -ENODEV;
 	}
 #endif
 #ifdef CONFIG_X86_IO_APIC
 	if (cpu_has_apic) {
-		printk(KERN_ERR PFX "APIC detected. Longhaul is currently broken in this configuration.\n");
+		printk(KERN_ERR PFX "APIC detected. Longhaul is currently "
+				"broken in this configuration.\n");
 		return -ENODEV;
 	}
 #endif
@@ -993,8 +995,8 @@ static void __exit longhaul_exit(void)
 {
 	int i;
 
-	for (i=0; i < numscales; i++) {
-		if (clock_ratio[i] == maxmult) {
+	for (i = 0; i < numscales; i++) {
+		if (mults[i] == maxmult) {
 			longhaul_setstate(i);
 			break;
 		}
@@ -1007,11 +1009,11 @@ static void __exit longhaul_exit(void)
 /* Even if BIOS is exporting ACPI C3 state, and it is used
  * with success when CPU is idle, this state doesn't
  * trigger frequency transition in some cases. */
-module_param (disable_acpi_c3, int, 0644);
+module_param(disable_acpi_c3, int, 0644);
 MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support");
 /* Change CPU voltage with frequency. Very usefull to save
  * power, but most VIA C3 processors aren't supporting it. */
-module_param (scale_voltage, int, 0644);
+module_param(scale_voltage, int, 0644);
 MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
 /* Force revision key to 0 for processors which doesn't
  * support voltage scaling, but are introducing itself as
@@ -1019,9 +1021,9 @@ MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
 module_param(revid_errata, int, 0644);
 MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID");
 
-MODULE_AUTHOR ("Dave Jones <davej@redhat.com>");
-MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
+MODULE_DESCRIPTION("Longhaul driver for VIA Cyrix processors.");
+MODULE_LICENSE("GPL");
 
 late_initcall(longhaul_init);
 module_exit(longhaul_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.h b/arch/x86/kernel/cpu/cpufreq/longhaul.h
index 4fcc320..e2360a4 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.h
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.h
@@ -49,14 +49,14 @@ union msr_longhaul {
 
 /*
  * Clock ratio tables. Div/Mod by 10 to get ratio.
- * The eblcr ones specify the ratio read from the CPU.
- * The clock_ratio ones specify what to write to the CPU.
+ * The eblcr values specify the ratio read from the CPU.
+ * The mults values specify what to write to the CPU.
  */
 
 /*
  * VIA C3 Samuel 1  & Samuel 2 (stepping 0)
  */
-static const int __initdata samuel1_clock_ratio[16] = {
+static const int __initdata samuel1_mults[16] = {
 	-1, /* 0000 -> RESERVED */
 	30, /* 0001 ->  3.0x */
 	40, /* 0010 ->  4.0x */
@@ -119,7 +119,7 @@ static const int __initdata samuel2_eblcr[16] = {
 /*
  * VIA C3 Ezra
  */
-static const int __initdata ezra_clock_ratio[16] = {
+static const int __initdata ezra_mults[16] = {
 	100, /* 0000 -> 10.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -160,7 +160,7 @@ static const int __initdata ezra_eblcr[16] = {
 /*
  * VIA C3 (Ezra-T) [C5M].
  */
-static const int __initdata ezrat_clock_ratio[32] = {
+static const int __initdata ezrat_mults[32] = {
 	100, /* 0000 -> 10.0x */
 	30,  /* 0001 ->  3.0x */
 	40,  /* 0010 ->  4.0x */
@@ -235,7 +235,7 @@ static const int __initdata ezrat_eblcr[32] = {
 /*
  * VIA C3 Nehemiah */
 
-static const int __initdata  nehemiah_clock_ratio[32] = {
+static const int __initdata  nehemiah_mults[32] = {
 	100, /* 0000 -> 10.0x */
 	-1, /* 0001 -> 16.0x */
 	40,  /* 0010 ->  4.0x */
diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c
index 777a7ff..da5f70f 100644
--- a/arch/x86/kernel/cpu/cpufreq/longrun.c
+++ b/arch/x86/kernel/cpu/cpufreq/longrun.c
@@ -11,12 +11,13 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
+#include <linux/timex.h>
 
 #include <asm/msr.h>
 #include <asm/processor.h>
-#include <asm/timex.h>
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longrun", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"longrun", msg)
 
 static struct cpufreq_driver	longrun_driver;
 
@@ -51,7 +52,7 @@ static void __init longrun_get_policy(struct cpufreq_policy *policy)
 	msr_lo &= 0x0000007F;
 	msr_hi &= 0x0000007F;
 
-	if ( longrun_high_freq <= longrun_low_freq ) {
+	if (longrun_high_freq <= longrun_low_freq) {
 		/* Assume degenerate Longrun table */
 		policy->min = policy->max = longrun_high_freq;
 	} else {
@@ -79,7 +80,7 @@ static int longrun_set_policy(struct cpufreq_policy *policy)
 	if (!policy)
 		return -EINVAL;
 
-	if ( longrun_high_freq <= longrun_low_freq ) {
+	if (longrun_high_freq <= longrun_low_freq) {
 		/* Assume degenerate Longrun table */
 		pctg_lo = pctg_hi = 100;
 	} else {
@@ -152,7 +153,7 @@ static unsigned int longrun_get(unsigned int cpu)
 	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
 	dprintk("cpuid eax is %u\n", eax);
 
-	return (eax * 1000);
+	return eax * 1000;
 }
 
 /**
@@ -196,7 +197,8 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
 		rdmsr(MSR_TMTA_LRTI_VOLT_MHZ, msr_lo, msr_hi);
 		*high_freq = msr_lo * 1000; /* to kHz */
 
-		dprintk("longrun table interface told %u - %u kHz\n", *low_freq, *high_freq);
+		dprintk("longrun table interface told %u - %u kHz\n",
+				*low_freq, *high_freq);
 
 		if (*low_freq > *high_freq)
 			*low_freq = *high_freq;
@@ -219,7 +221,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
 	cpuid(0x80860007, &eax, &ebx, &ecx, &edx);
 	/* try decreasing in 10% steps, some processors react only
 	 * on some barrier values */
-	for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -=10) {
+	for (try_hi = 80; try_hi > 0 && ecx > 90; try_hi -= 10) {
 		/* set to 0 to try_hi perf_pctg */
 		msr_lo &= 0xFFFFFF80;
 		msr_hi &= 0xFFFFFF80;
@@ -236,7 +238,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq,
 
 	/* performance_pctg = (current_freq - low_freq)/(high_freq - low_freq)
 	 * eqals
-	 * low_freq * ( 1 - perf_pctg) = (cur_freq - high_freq * perf_pctg)
+	 * low_freq * (1 - perf_pctg) = (cur_freq - high_freq * perf_pctg)
 	 *
 	 * high_freq * perf_pctg is stored tempoarily into "ebx".
 	 */
@@ -317,9 +319,10 @@ static void __exit longrun_exit(void)
 }
 
 
-MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("LongRun driver for Transmeta Crusoe and Efficeon processors.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("LongRun driver for Transmeta Crusoe and "
+		"Efficeon processors.");
+MODULE_LICENSE("GPL");
 
 module_init(longrun_init);
 module_exit(longrun_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 3178c3a..6ac55bd 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -27,15 +27,17 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/cpumask.h>
+#include <linux/timex.h>
 
 #include <asm/processor.h>
 #include <asm/msr.h>
-#include <asm/timex.h>
+#include <asm/timer.h>
 
 #include "speedstep-lib.h"
 
 #define PFX	"p4-clockmod: "
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"p4-clockmod", msg)
 
 /*
  * Duty Cycle (3bits), note DC_DISABLE is not specified in
@@ -58,7 +60,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
 {
 	u32 l, h;
 
-	if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV))
+	if (!cpu_online(cpu) ||
+	    (newstate > DC_DISABLE) || (newstate == DC_RESV))
 		return -EINVAL;
 
 	rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
@@ -66,7 +69,8 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
 	if (l & 0x01)
 		dprintk("CPU#%d currently thermal throttled\n", cpu);
 
-	if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
+	if (has_N44_O17_errata[cpu] &&
+	    (newstate == DC_25PT || newstate == DC_DFLT))
 		newstate = DC_38PT;
 
 	rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
@@ -112,7 +116,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 	struct cpufreq_freqs freqs;
 	int i;
 
-	if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0],
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	freqs.old = cpufreq_p4_get(policy->cpu);
@@ -127,7 +132,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
 
-	/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
+	/* run on each logical CPU,
+	 * see section 13.15.3 of IA32 Intel Architecture Software
 	 * Developer's Manual, Volume 3
 	 */
 	for_each_cpu(i, policy->cpus)
@@ -153,28 +159,30 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 {
 	if (c->x86 == 0x06) {
 		if (cpu_has(c, X86_FEATURE_EST))
-			printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. "
-			       "The acpi-cpufreq module offers voltage scaling"
-			       " in addition of frequency scaling. You should use "
-			       "that instead of p4-clockmod, if possible.\n");
+			printk(KERN_WARNING PFX "Warning: EST-capable CPU "
+			       "detected. The acpi-cpufreq module offers "
+			       "voltage scaling in addition of frequency "
+			       "scaling. You should use that instead of "
+			       "p4-clockmod, if possible.\n");
 		switch (c->x86_model) {
 		case 0x0E: /* Core */
 		case 0x0F: /* Core Duo */
 		case 0x16: /* Celeron Core */
 			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
-			return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE);
+			return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
 		case 0x0D: /* Pentium M (Dothan) */
 			p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
 			/* fall through */
 		case 0x09: /* Pentium M (Banias) */
-			return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+			return speedstep_get_frequency(SPEEDSTEP_CPU_PM);
 		}
 	}
 
 	if (c->x86 != 0xF) {
 		if (!cpu_has(c, X86_FEATURE_EST))
-			printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. "
-				"Please send an e-mail to <cpufreq@vger.kernel.org>\n");
+			printk(KERN_WARNING PFX "Unknown CPU. "
+				"Please send an e-mail to "
+				"<cpufreq@vger.kernel.org>\n");
 		return 0;
 	}
 
@@ -182,16 +190,16 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
 	 * throttling is active or not. */
 	p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
 
-	if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) {
+	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
 		printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
 		       "The speedstep-ich or acpi cpufreq modules offer "
 		       "voltage scaling in addition of frequency scaling. "
 		       "You should use either one instead of p4-clockmod, "
 		       "if possible.\n");
-		return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M);
+		return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
 	}
 
-	return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D);
+	return speedstep_get_frequency(SPEEDSTEP_CPU_P4D);
 }
 
 
@@ -203,7 +211,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
 	unsigned int i;
 
 #ifdef CONFIG_SMP
-	cpumask_copy(policy->cpus, &per_cpu(cpu_sibling_map, policy->cpu));
+	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
 #endif
 
 	/* Errata workaround */
@@ -217,14 +225,20 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
 		dprintk("has errata -- disabling low frequencies\n");
 	}
 
+	if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D &&
+	    c->x86_model < 2) {
+		/* switch to maximum frequency and measure result */
+		cpufreq_p4_setdc(policy->cpu, DC_DISABLE);
+		recalibrate_cpu_khz();
+	}
 	/* get max frequency */
 	stock_freq = cpufreq_p4_get_frequency(c);
 	if (!stock_freq)
 		return -EINVAL;
 
 	/* table init */
-	for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
-		if ((i<2) && (has_N44_O17_errata[policy->cpu]))
+	for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+		if ((i < 2) && (has_N44_O17_errata[policy->cpu]))
 			p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
 		else
 			p4clockmod_table[i].frequency = (stock_freq * i)/8;
@@ -232,7 +246,10 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
 	cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
 
 	/* cpuinfo and default policy values */
-	policy->cpuinfo.transition_latency = 1000000; /* assumed */
+
+	/* the transition latency is set to be 1 higher than the maximum
+	 * transition latency of the ondemand governor */
+	policy->cpuinfo.transition_latency = 10000001;
 	policy->cur = stock_freq;
 
 	return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]);
@@ -258,12 +275,12 @@ static unsigned int cpufreq_p4_get(unsigned int cpu)
 		l = DC_DISABLE;
 
 	if (l != DC_DISABLE)
-		return (stock_freq * l / 8);
+		return stock_freq * l / 8;
 
 	return stock_freq;
 }
 
-static struct freq_attr* p4clockmod_attr[] = {
+static struct freq_attr *p4clockmod_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -298,9 +315,10 @@ static int __init cpufreq_p4_init(void)
 
 	ret = cpufreq_register_driver(&p4clockmod_driver);
 	if (!ret)
-		printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
+		printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock "
+				"Modulation available\n");
 
-	return (ret);
+	return ret;
 }
 
 
@@ -310,9 +328,9 @@ static void __exit cpufreq_p4_exit(void)
 }
 
 
-MODULE_AUTHOR ("Zwane Mwaikambo <zwane@commfireservices.com>");
-MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Zwane Mwaikambo <zwane@commfireservices.com>");
+MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
+MODULE_LICENSE("GPL");
 
 late_initcall(cpufreq_p4_init);
 module_exit(cpufreq_p4_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
index c1ac579..f10dea4 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
@@ -1,6 +1,7 @@
 /*
  *  This file was based upon code in Powertweak Linux (http://powertweak.sf.net)
- *  (C) 2000-2003  Dave Jones, Arjan van de Ven, Janne Pänkälä, Dominik Brodowski.
+ *  (C) 2000-2003  Dave Jones, Arjan van de Ven, Janne Pänkälä,
+ *                 Dominik Brodowski.
  *
  *  Licensed under the terms of the GNU GPL License version 2.
  *
@@ -13,14 +14,15 @@
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
-
-#include <asm/msr.h>
 #include <linux/timex.h>
 #include <linux/io.h>
 
+#include <asm/msr.h>
+
 #define POWERNOW_IOPORT 0xfff0          /* it doesn't matter where, as long
 					   as it is unused */
 
+#define PFX "powernow-k6: "
 static unsigned int                     busfreq;   /* FSB, in 10 kHz */
 static unsigned int                     max_multiplier;
 
@@ -47,8 +49,8 @@ static struct cpufreq_frequency_table clock_ratio[] = {
  */
 static int powernow_k6_get_cpu_multiplier(void)
 {
-	u64             invalue = 0;
-	u32             msrval;
+	u64 invalue = 0;
+	u32 msrval;
 
 	msrval = POWERNOW_IOPORT + 0x1;
 	wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */
@@ -68,12 +70,12 @@ static int powernow_k6_get_cpu_multiplier(void)
  */
 static void powernow_k6_set_state(unsigned int best_i)
 {
-	unsigned long           outvalue = 0, invalue = 0;
-	unsigned long           msrval;
-	struct cpufreq_freqs    freqs;
+	unsigned long outvalue = 0, invalue = 0;
+	unsigned long msrval;
+	struct cpufreq_freqs freqs;
 
 	if (clock_ratio[best_i].index > max_multiplier) {
-		printk(KERN_ERR "cpufreq: invalid target frequency\n");
+		printk(KERN_ERR PFX "invalid target frequency\n");
 		return;
 	}
 
@@ -119,7 +121,8 @@ static int powernow_k6_verify(struct cpufreq_policy *policy)
  * powernow_k6_setpolicy - sets a new CPUFreq policy
  * @policy: new policy
  * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ * @relation: how that frequency relates to achieved frequency
+ *  (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
  *
  * sets a new CPUFreq policy
  */
@@ -127,9 +130,10 @@ static int powernow_k6_target(struct cpufreq_policy *policy,
 			       unsigned int target_freq,
 			       unsigned int relation)
 {
-	unsigned int    newstate = 0;
+	unsigned int newstate = 0;
 
-	if (cpufreq_frequency_table_target(policy, &clock_ratio[0], target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, &clock_ratio[0],
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	powernow_k6_set_state(newstate);
@@ -140,7 +144,7 @@ static int powernow_k6_target(struct cpufreq_policy *policy,
 
 static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 {
-	unsigned int i;
+	unsigned int i, f;
 	int result;
 
 	if (policy->cpu != 0)
@@ -152,10 +156,11 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 
 	/* table init */
 	for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
-		if (clock_ratio[i].index > max_multiplier)
+		f = clock_ratio[i].index;
+		if (f > max_multiplier)
 			clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
 		else
-			clock_ratio[i].frequency = busfreq * clock_ratio[i].index;
+			clock_ratio[i].frequency = busfreq * f;
 	}
 
 	/* cpuinfo and default policy values */
@@ -185,7 +190,9 @@ static int powernow_k6_cpu_exit(struct cpufreq_policy *policy)
 
 static unsigned int powernow_k6_get(unsigned int cpu)
 {
-	return busfreq * powernow_k6_get_cpu_multiplier();
+	unsigned int ret;
+	ret = (busfreq * powernow_k6_get_cpu_multiplier());
+	return ret;
 }
 
 static struct freq_attr *powernow_k6_attr[] = {
@@ -221,7 +228,7 @@ static int __init powernow_k6_init(void)
 		return -ENODEV;
 
 	if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
-		printk("cpufreq: PowerNow IOPORT region already used.\n");
+		printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n");
 		return -EIO;
 	}
 
@@ -246,7 +253,8 @@ static void __exit powernow_k6_exit(void)
 }
 
 
-MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, Dominik Brodowski <linux@brodo.de>");
+MODULE_AUTHOR("Arjan van de Ven, Dave Jones <davej@redhat.com>, "
+		"Dominik Brodowski <linux@brodo.de>");
 MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors.");
 MODULE_LICENSE("GPL");
 
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
index 1b446d7..3c28ccd 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c
@@ -6,10 +6,12 @@
  *  Licensed under the terms of the GNU GPL License version 2.
  *  Based upon datasheets & sample CPUs kindly provided by AMD.
  *
- * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt.
- * - We cli/sti on stepping A0 CPUs around the FID/VID transition.
- * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect.
- * - We disable half multipliers if ACPI is used on A0 stepping CPUs.
+ * Errata 5:
+ *  CPU may fail to execute a FID/VID change in presence of interrupt.
+ *  - We cli/sti on stepping A0 CPUs around the FID/VID transition.
+ * Errata 15:
+ *  CPU with half frequency multipliers may hang upon wakeup from disconnect.
+ *  - We disable half multipliers if ACPI is used on A0 stepping CPUs.
  */
 
 #include <linux/kernel.h>
@@ -20,11 +22,11 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/dmi.h>
+#include <linux/timex.h>
+#include <linux/io.h>
 
+#include <asm/timer.h>		/* Needed for recalibrate_cpu_khz() */
 #include <asm/msr.h>
-#include <asm/timer.h>
-#include <asm/timex.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
@@ -58,9 +60,9 @@ struct pst_s {
 union powernow_acpi_control_t {
 	struct {
 		unsigned long fid:5,
-		vid:5,
-		sgtc:20,
-		res1:2;
+			vid:5,
+			sgtc:20,
+			res1:2;
 	} bits;
 	unsigned long val;
 };
@@ -94,14 +96,15 @@ static struct cpufreq_frequency_table *powernow_table;
 
 static unsigned int can_scale_bus;
 static unsigned int can_scale_vid;
-static unsigned int minimum_speed=-1;
+static unsigned int minimum_speed = -1;
 static unsigned int maximum_speed;
 static unsigned int number_scales;
 static unsigned int fsb;
 static unsigned int latency;
 static char have_a0;
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "powernow-k7", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"powernow-k7", msg)
 
 static int check_fsb(unsigned int fsbspeed)
 {
@@ -109,7 +112,7 @@ static int check_fsb(unsigned int fsbspeed)
 	unsigned int f = fsb / 1000;
 
 	delta = (fsbspeed > f) ? fsbspeed - f : f - fsbspeed;
-	return (delta < 5);
+	return delta < 5;
 }
 
 static int check_powernow(void)
@@ -117,24 +120,26 @@ static int check_powernow(void)
 	struct cpuinfo_x86 *c = &cpu_data(0);
 	unsigned int maxei, eax, ebx, ecx, edx;
 
-	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) {
+	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) {
 #ifdef MODULE
-		printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n");
+		printk(KERN_INFO PFX "This module only works with "
+				"AMD K7 CPUs\n");
 #endif
 		return 0;
 	}
 
 	/* Get maximum capabilities */
-	maxei = cpuid_eax (0x80000000);
+	maxei = cpuid_eax(0x80000000);
 	if (maxei < 0x80000007) {	/* Any powernow info ? */
 #ifdef MODULE
-		printk (KERN_INFO PFX "No powernow capabilities detected\n");
+		printk(KERN_INFO PFX "No powernow capabilities detected\n");
 #endif
 		return 0;
 	}
 
 	if ((c->x86_model == 6) && (c->x86_mask == 0)) {
-		printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n");
+		printk(KERN_INFO PFX "K7 660[A0] core detected, "
+				"enabling errata workarounds\n");
 		have_a0 = 1;
 	}
 
@@ -144,37 +149,42 @@ static int check_powernow(void)
 	if (!(edx & (1 << 1 | 1 << 2)))
 		return 0;
 
-	printk (KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
+	printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
 
 	if (edx & 1 << 1) {
-		printk ("frequency");
-		can_scale_bus=1;
+		printk("frequency");
+		can_scale_bus = 1;
 	}
 
 	if ((edx & (1 << 1 | 1 << 2)) == 0x6)
-		printk (" and ");
+		printk(" and ");
 
 	if (edx & 1 << 2) {
-		printk ("voltage");
-		can_scale_vid=1;
+		printk("voltage");
+		can_scale_vid = 1;
 	}
 
-	printk (".\n");
+	printk(".\n");
 	return 1;
 }
 
+static void invalidate_entry(unsigned int entry)
+{
+	powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
+}
 
-static int get_ranges (unsigned char *pst)
+static int get_ranges(unsigned char *pst)
 {
 	unsigned int j;
 	unsigned int speed;
 	u8 fid, vid;
 
-	powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) * (number_scales + 1)), GFP_KERNEL);
+	powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) *
+				(number_scales + 1)), GFP_KERNEL);
 	if (!powernow_table)
 		return -ENOMEM;
 
-	for (j=0 ; j < number_scales; j++) {
+	for (j = 0 ; j < number_scales; j++) {
 		fid = *pst++;
 
 		powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10;
@@ -182,10 +192,10 @@ static int get_ranges (unsigned char *pst)
 
 		speed = powernow_table[j].frequency;
 
-		if ((fid_codes[fid] % 10)==5) {
+		if ((fid_codes[fid] % 10) == 5) {
 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
 			if (have_a0 == 1)
-				powernow_table[j].frequency = CPUFREQ_ENTRY_INVALID;
+				invalidate_entry(j);
 #endif
 		}
 
@@ -197,7 +207,7 @@ static int get_ranges (unsigned char *pst)
 		vid = *pst++;
 		powernow_table[j].index |= (vid << 8); /* upper 8 bits */
 
-		dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
+		dprintk("   FID: 0x%x (%d.%dx [%dMHz])  "
 			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
 			 fid_codes[fid] % 10, speed/1000, vid,
 			 mobile_vid_table[vid]/1000,
@@ -214,13 +224,13 @@ static void change_FID(int fid)
 {
 	union msr_fidvidctl fidvidctl;
 
-	rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+	rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
 	if (fidvidctl.bits.FID != fid) {
 		fidvidctl.bits.SGTC = latency;
 		fidvidctl.bits.FID = fid;
 		fidvidctl.bits.VIDC = 0;
 		fidvidctl.bits.FIDC = 1;
-		wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+		wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
 	}
 }
 
@@ -229,18 +239,18 @@ static void change_VID(int vid)
 {
 	union msr_fidvidctl fidvidctl;
 
-	rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+	rdmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
 	if (fidvidctl.bits.VID != vid) {
 		fidvidctl.bits.SGTC = latency;
 		fidvidctl.bits.VID = vid;
 		fidvidctl.bits.FIDC = 0;
 		fidvidctl.bits.VIDC = 1;
-		wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
+		wrmsrl(MSR_K7_FID_VID_CTL, fidvidctl.val);
 	}
 }
 
 
-static void change_speed (unsigned int index)
+static void change_speed(unsigned int index)
 {
 	u8 fid, vid;
 	struct cpufreq_freqs freqs;
@@ -257,7 +267,7 @@ static void change_speed (unsigned int index)
 
 	freqs.cpu = 0;
 
-	rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
 	cfid = fidvidstatus.bits.CFID;
 	freqs.old = fsb * fid_codes[cfid] / 10;
 
@@ -321,12 +331,14 @@ static int powernow_acpi_init(void)
 		goto err1;
 	}
 
-	if (acpi_processor_perf->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
+	if (acpi_processor_perf->control_register.space_id !=
+			ACPI_ADR_SPACE_FIXED_HARDWARE) {
 		retval = -ENODEV;
 		goto err2;
 	}
 
-	if (acpi_processor_perf->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) {
+	if (acpi_processor_perf->status_register.space_id !=
+			ACPI_ADR_SPACE_FIXED_HARDWARE) {
 		retval = -ENODEV;
 		goto err2;
 	}
@@ -338,7 +350,8 @@ static int powernow_acpi_init(void)
 		goto err2;
 	}
 
-	powernow_table = kzalloc((number_scales + 1) * (sizeof(struct cpufreq_frequency_table)), GFP_KERNEL);
+	powernow_table = kzalloc((sizeof(struct cpufreq_frequency_table) *
+				(number_scales + 1)), GFP_KERNEL);
 	if (!powernow_table) {
 		retval = -ENOMEM;
 		goto err2;
@@ -352,7 +365,7 @@ static int powernow_acpi_init(void)
 		unsigned int speed, speed_mhz;
 
 		pc.val = (unsigned long) state->control;
-		dprintk ("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
+		dprintk("acpi:  P%d: %d MHz %d mW %d uS control %08x SGTC %d\n",
 			 i,
 			 (u32) state->core_frequency,
 			 (u32) state->power,
@@ -381,12 +394,12 @@ static int powernow_acpi_init(void)
 		if (speed % 1000 > 0)
 			speed_mhz++;
 
-		if ((fid_codes[fid] % 10)==5) {
+		if ((fid_codes[fid] % 10) == 5) {
 			if (have_a0 == 1)
-				powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+				invalidate_entry(i);
 		}
 
-		dprintk ("   FID: 0x%x (%d.%dx [%dMHz])  "
+		dprintk("   FID: 0x%x (%d.%dx [%dMHz])  "
 			 "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10,
 			 fid_codes[fid] % 10, speed_mhz, vid,
 			 mobile_vid_table[vid]/1000,
@@ -422,7 +435,8 @@ err1:
 err05:
 	kfree(acpi_processor_perf);
 err0:
-	printk(KERN_WARNING PFX "ACPI perflib can not be used in this platform\n");
+	printk(KERN_WARNING PFX "ACPI perflib can not be used on "
+			"this platform\n");
 	acpi_processor_perf = NULL;
 	return retval;
 }
@@ -435,7 +449,14 @@ static int powernow_acpi_init(void)
 }
 #endif
 
-static int powernow_decode_bios (int maxfid, int startvid)
+static void print_pst_entry(struct pst_s *pst, unsigned int j)
+{
+	dprintk("PST:%d (@%p)\n", j, pst);
+	dprintk(" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n",
+		pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
+}
+
+static int powernow_decode_bios(int maxfid, int startvid)
 {
 	struct psb_s *psb;
 	struct pst_s *pst;
@@ -446,61 +467,67 @@ static int powernow_decode_bios (int maxfid, int startvid)
 
 	etuple = cpuid_eax(0x80000001);
 
-	for (i=0xC0000; i < 0xffff0 ; i+=16) {
+	for (i = 0xC0000; i < 0xffff0 ; i += 16) {
 
 		p = phys_to_virt(i);
 
-		if (memcmp(p, "AMDK7PNOW!",  10) == 0){
-			dprintk ("Found PSB header at %p\n", p);
+		if (memcmp(p, "AMDK7PNOW!",  10) == 0) {
+			dprintk("Found PSB header at %p\n", p);
 			psb = (struct psb_s *) p;
-			dprintk ("Table version: 0x%x\n", psb->tableversion);
+			dprintk("Table version: 0x%x\n", psb->tableversion);
 			if (psb->tableversion != 0x12) {
-				printk (KERN_INFO PFX "Sorry, only v1.2 tables supported right now\n");
+				printk(KERN_INFO PFX "Sorry, only v1.2 tables"
+						" supported right now\n");
 				return -ENODEV;
 			}
 
-			dprintk ("Flags: 0x%x\n", psb->flags);
-			if ((psb->flags & 1)==0) {
-				dprintk ("Mobile voltage regulator\n");
-			} else {
-				dprintk ("Desktop voltage regulator\n");
-			}
+			dprintk("Flags: 0x%x\n", psb->flags);
+			if ((psb->flags & 1) == 0)
+				dprintk("Mobile voltage regulator\n");
+			else
+				dprintk("Desktop voltage regulator\n");
 
 			latency = psb->settlingtime;
 			if (latency < 100) {
-				printk(KERN_INFO PFX "BIOS set settling time to %d microseconds. "
-						"Should be at least 100. Correcting.\n", latency);
+				printk(KERN_INFO PFX "BIOS set settling time "
+						"to %d microseconds. "
+						"Should be at least 100. "
+						"Correcting.\n", latency);
 				latency = 100;
 			}
-			dprintk ("Settling Time: %d microseconds.\n", psb->settlingtime);
-			dprintk ("Has %d PST tables. (Only dumping ones relevant to this CPU).\n", psb->numpst);
+			dprintk("Settling Time: %d microseconds.\n",
+					psb->settlingtime);
+			dprintk("Has %d PST tables. (Only dumping ones "
+					"relevant to this CPU).\n",
+					psb->numpst);
 
-			p += sizeof (struct psb_s);
+			p += sizeof(struct psb_s);
 
 			pst = (struct pst_s *) p;
 
-			for (j=0; j<psb->numpst; j++) {
+			for (j = 0; j < psb->numpst; j++) {
 				pst = (struct pst_s *) p;
 				number_scales = pst->numpstates;
 
-				if ((etuple == pst->cpuid) && check_fsb(pst->fsbspeed) &&
-				    (maxfid==pst->maxfid) && (startvid==pst->startvid))
-				{
-					dprintk ("PST:%d (@%p)\n", j, pst);
-					dprintk (" cpuid: 0x%x  fsb: %d  maxFID: 0x%x  startvid: 0x%x\n",
-						 pst->cpuid, pst->fsbspeed, pst->maxfid, pst->startvid);
-
-					ret = get_ranges ((char *) pst + sizeof (struct pst_s));
+				if ((etuple == pst->cpuid) &&
+				    check_fsb(pst->fsbspeed) &&
+				    (maxfid == pst->maxfid) &&
+				    (startvid == pst->startvid)) {
+					print_pst_entry(pst, j);
+					p = (char *)pst + sizeof(struct pst_s);
+					ret = get_ranges(p);
 					return ret;
 				} else {
 					unsigned int k;
-					p = (char *) pst + sizeof (struct pst_s);
-					for (k=0; k<number_scales; k++)
-						p+=2;
+					p = (char *)pst + sizeof(struct pst_s);
+					for (k = 0; k < number_scales; k++)
+						p += 2;
 				}
 			}
-			printk (KERN_INFO PFX "No PST tables match this cpuid (0x%x)\n", etuple);
-			printk (KERN_INFO PFX "This is indicative of a broken BIOS.\n");
+			printk(KERN_INFO PFX "No PST tables match this cpuid "
+					"(0x%x)\n", etuple);
+			printk(KERN_INFO PFX "This is indicative of a broken "
+					"BIOS.\n");
 
 			return -EINVAL;
 		}
@@ -511,13 +538,14 @@ static int powernow_decode_bios (int maxfid, int startvid)
 }
 
 
-static int powernow_target (struct cpufreq_policy *policy,
+static int powernow_target(struct cpufreq_policy *policy,
 			    unsigned int target_freq,
 			    unsigned int relation)
 {
 	unsigned int newstate;
 
-	if (cpufreq_frequency_table_target(policy, powernow_table, target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, powernow_table, target_freq,
+				relation, &newstate))
 		return -EINVAL;
 
 	change_speed(newstate);
@@ -526,7 +554,7 @@ static int powernow_target (struct cpufreq_policy *policy,
 }
 
 
-static int powernow_verify (struct cpufreq_policy *policy)
+static int powernow_verify(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, powernow_table);
 }
@@ -566,18 +594,23 @@ static unsigned int powernow_get(unsigned int cpu)
 
 	if (cpu)
 		return 0;
-	rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
 	cfid = fidvidstatus.bits.CFID;
 
-	return (fsb * fid_codes[cfid] / 10);
+	return fsb * fid_codes[cfid] / 10;
 }
 
 
 static int __init acer_cpufreq_pst(const struct dmi_system_id *d)
 {
-	printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident);
-	printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");
-	printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n");
+	printk(KERN_WARNING PFX
+		"%s laptop with broken PST tables in BIOS detected.\n",
+		d->ident);
+	printk(KERN_WARNING PFX
+		"You need to downgrade to 3A21 (09/09/2002), or try a newer "
+		"BIOS than 3A71 (01/20/2003)\n");
+	printk(KERN_WARNING PFX
+		"cpufreq scaling has been disabled as a result of this.\n");
 	return 0;
 }
 
@@ -598,7 +631,7 @@ static struct dmi_system_id __initdata powernow_dmi_table[] = {
 	{ }
 };
 
-static int __init powernow_cpu_init (struct cpufreq_policy *policy)
+static int __init powernow_cpu_init(struct cpufreq_policy *policy)
 {
 	union msr_fidvidstatus fidvidstatus;
 	int result;
@@ -606,7 +639,7 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
 	if (policy->cpu != 0)
 		return -ENODEV;
 
-	rdmsrl (MSR_K7_FID_VID_STATUS, fidvidstatus.val);
+	rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val);
 
 	recalibrate_cpu_khz();
 
@@ -618,19 +651,21 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
 	dprintk("FSB: %3dMHz\n", fsb/1000);
 
 	if (dmi_check_system(powernow_dmi_table) || acpi_force) {
-		printk (KERN_INFO PFX "PSB/PST known to be broken.  Trying ACPI instead\n");
+		printk(KERN_INFO PFX "PSB/PST known to be broken.  "
+				"Trying ACPI instead\n");
 		result = powernow_acpi_init();
 	} else {
-		result = powernow_decode_bios(fidvidstatus.bits.MFID, fidvidstatus.bits.SVID);
+		result = powernow_decode_bios(fidvidstatus.bits.MFID,
+				fidvidstatus.bits.SVID);
 		if (result) {
-			printk (KERN_INFO PFX "Trying ACPI perflib\n");
+			printk(KERN_INFO PFX "Trying ACPI perflib\n");
 			maximum_speed = 0;
 			minimum_speed = -1;
 			latency = 0;
 			result = powernow_acpi_init();
 			if (result) {
-				printk (KERN_INFO PFX "ACPI and legacy methods failed\n");
-				printk (KERN_INFO PFX "See http://www.codemonkey.org.uk/projects/cpufreq/powernow-k7.html\n");
+				printk(KERN_INFO PFX
+					"ACPI and legacy methods failed\n");
 			}
 		} else {
 			/* SGTC use the bus clock as timer */
@@ -642,10 +677,11 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
 	if (result)
 		return result;
 
-	printk (KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
+	printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
 				minimum_speed/1000, maximum_speed/1000);
 
-	policy->cpuinfo.transition_latency = cpufreq_scale(2000000UL, fsb, latency);
+	policy->cpuinfo.transition_latency =
+		cpufreq_scale(2000000UL, fsb, latency);
 
 	policy->cur = powernow_get(0);
 
@@ -654,7 +690,8 @@ static int __init powernow_cpu_init (struct cpufreq_policy *policy)
 	return cpufreq_frequency_table_cpuinfo(policy, powernow_table);
 }
 
-static int powernow_cpu_exit (struct cpufreq_policy *policy) {
+static int powernow_cpu_exit(struct cpufreq_policy *policy)
+{
 	cpufreq_frequency_table_put_attr(policy->cpu);
 
 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
@@ -669,7 +706,7 @@ static int powernow_cpu_exit (struct cpufreq_policy *policy) {
 	return 0;
 }
 
-static struct freq_attr* powernow_table_attr[] = {
+static struct freq_attr *powernow_table_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -685,15 +722,15 @@ static struct cpufreq_driver powernow_driver = {
 	.attr	= powernow_table_attr,
 };
 
-static int __init powernow_init (void)
+static int __init powernow_init(void)
 {
-	if (check_powernow()==0)
+	if (check_powernow() == 0)
 		return -ENODEV;
 	return cpufreq_register_driver(&powernow_driver);
 }
 
 
-static void __exit powernow_exit (void)
+static void __exit powernow_exit(void)
 {
 	cpufreq_unregister_driver(&powernow_driver);
 }
@@ -701,9 +738,9 @@ static void __exit powernow_exit (void)
 module_param(acpi_force,  int, 0444);
 MODULE_PARM_DESC(acpi_force, "Force ACPI to be used.");
 
-MODULE_AUTHOR ("Dave Jones <davej@redhat.com>");
-MODULE_DESCRIPTION ("Powernow driver for AMD K7 processors.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dave Jones <davej@redhat.com>");
+MODULE_DESCRIPTION("Powernow driver for AMD K7 processors.");
+MODULE_LICENSE("GPL");
 
 late_initcall(powernow_init);
 module_exit(powernow_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 6428aa1..4709ead 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -33,16 +33,14 @@
 #include <linux/string.h>
 #include <linux/cpumask.h>
 #include <linux/sched.h>	/* for current / set_cpus_allowed() */
+#include <linux/io.h>
+#include <linux/delay.h>
 
 #include <asm/msr.h>
-#include <asm/io.h>
-#include <asm/delay.h>
 
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
 #include <linux/acpi.h>
 #include <linux/mutex.h>
 #include <acpi/processor.h>
-#endif
 
 #define PFX "powernow-k8: "
 #define VERSION "version 2.20.00"
@@ -56,7 +54,10 @@ static DEFINE_PER_CPU(struct powernow_k8_data *, powernow_data);
 static int cpu_family = CPU_OPTERON;
 
 #ifndef CONFIG_SMP
-DEFINE_PER_CPU(cpumask_t, cpu_core_map);
+static inline const struct cpumask *cpu_core_mask(int cpu)
+{
+	return cpumask_of(0);
+}
 #endif
 
 /* Return a frequency in MHz, given an input fid */
@@ -71,7 +72,8 @@ static u32 find_khz_freq_from_fid(u32 fid)
 	return 1000 * find_freq_from_fid(fid);
 }
 
-static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 pstate)
+static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data,
+		u32 pstate)
 {
 	return data[pstate].frequency;
 }
@@ -186,7 +188,9 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 		return 1;
 	}
 
-	lo = fid | (data->currvid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID;
+	lo = fid;
+	lo |= (data->currvid << MSR_C_LO_VID_SHIFT);
+	lo |= MSR_C_LO_INIT_FID_VID;
 
 	dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
 		fid, lo, data->plllock * PLL_LOCK_CONVERSION);
@@ -194,7 +198,9 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 	do {
 		wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
 		if (i++ > 100) {
-			printk(KERN_ERR PFX "Hardware error - pending bit very stuck - no further pstate changes possible\n");
+			printk(KERN_ERR PFX
+				"Hardware error - pending bit very stuck - "
+				"no further pstate changes possible\n");
 			return 1;
 		}
 	} while (query_current_values_with_pending_wait(data));
@@ -202,14 +208,16 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 	count_off_irt(data);
 
 	if (savevid != data->currvid) {
-		printk(KERN_ERR PFX "vid change on fid trans, old 0x%x, new 0x%x\n",
-		       savevid, data->currvid);
+		printk(KERN_ERR PFX
+			"vid change on fid trans, old 0x%x, new 0x%x\n",
+			savevid, data->currvid);
 		return 1;
 	}
 
 	if (fid != data->currfid) {
-		printk(KERN_ERR PFX "fid trans failed, fid 0x%x, curr 0x%x\n", fid,
-		        data->currfid);
+		printk(KERN_ERR PFX
+			"fid trans failed, fid 0x%x, curr 0x%x\n", fid,
+			data->currfid);
 		return 1;
 	}
 
@@ -228,7 +236,9 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
 		return 1;
 	}
 
-	lo = data->currfid | (vid << MSR_C_LO_VID_SHIFT) | MSR_C_LO_INIT_FID_VID;
+	lo = data->currfid;
+	lo |= (vid << MSR_C_LO_VID_SHIFT);
+	lo |= MSR_C_LO_INIT_FID_VID;
 
 	dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
 		vid, lo, STOP_GRANT_5NS);
@@ -236,20 +246,24 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
 	do {
 		wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
 		if (i++ > 100) {
-			printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+			printk(KERN_ERR PFX "internal error - pending bit "
+					"very stuck - no further pstate "
+					"changes possible\n");
 			return 1;
 		}
 	} while (query_current_values_with_pending_wait(data));
 
 	if (savefid != data->currfid) {
-		printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n",
+		printk(KERN_ERR PFX "fid changed on vid trans, old "
+			"0x%x new 0x%x\n",
 		       savefid, data->currfid);
 		return 1;
 	}
 
 	if (vid != data->currvid) {
-		printk(KERN_ERR PFX "vid trans failed, vid 0x%x, curr 0x%x\n", vid,
-				data->currvid);
+		printk(KERN_ERR PFX "vid trans failed, vid 0x%x, "
+				"curr 0x%x\n",
+				vid, data->currvid);
 		return 1;
 	}
 
@@ -261,7 +275,8 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
  * Decreasing vid codes represent increasing voltages:
  * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off.
  */
-static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step)
+static int decrease_vid_code_by_step(struct powernow_k8_data *data,
+		u32 reqvid, u32 step)
 {
 	if ((data->currvid - reqvid) > step)
 		reqvid = data->currvid - step;
@@ -283,7 +298,8 @@ static int transition_pstate(struct powernow_k8_data *data, u32 pstate)
 }
 
 /* Change Opteron/Athlon64 fid and vid, by the 3 phases. */
-static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 reqvid)
+static int transition_fid_vid(struct powernow_k8_data *data,
+		u32 reqfid, u32 reqvid)
 {
 	if (core_voltage_pre_transition(data, reqvid))
 		return 1;
@@ -298,7 +314,8 @@ static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 req
 		return 1;
 
 	if ((reqfid != data->currfid) || (reqvid != data->currvid)) {
-		printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n",
+		printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, "
+				"curr 0x%x 0x%x\n",
 				smp_processor_id(),
 				reqfid, reqvid, data->currfid, data->currvid);
 		return 1;
@@ -311,13 +328,15 @@ static int transition_fid_vid(struct powernow_k8_data *data, u32 reqfid, u32 req
 }
 
 /* Phase 1 - core voltage transition ... setup voltage */
-static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid)
+static int core_voltage_pre_transition(struct powernow_k8_data *data,
+		u32 reqvid)
 {
 	u32 rvosteps = data->rvo;
 	u32 savefid = data->currfid;
 	u32 maxvid, lo;
 
-	dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x, rvo 0x%x\n",
+	dprintk("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
+		"reqvid 0x%x, rvo 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid, reqvid, data->rvo);
 
@@ -340,7 +359,7 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
 		} else {
 			dprintk("ph1: changing vid for rvo, req 0x%x\n",
 				data->currvid - 1);
-			if (decrease_vid_code_by_step(data, data->currvid - 1, 1))
+			if (decrease_vid_code_by_step(data, data->currvid-1, 1))
 				return 1;
 			rvosteps--;
 		}
@@ -350,7 +369,8 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
 		return 1;
 
 	if (savefid != data->currfid) {
-		printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n", data->currfid);
+		printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n",
+				data->currfid);
 		return 1;
 	}
 
@@ -363,20 +383,24 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
 /* Phase 2 - core frequency transition */
 static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 {
-	u32 vcoreqfid, vcocurrfid, vcofiddiff, fid_interval, savevid = data->currvid;
+	u32 vcoreqfid, vcocurrfid, vcofiddiff;
+	u32 fid_interval, savevid = data->currvid;
 
-	if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
-		printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n",
-			reqfid, data->currfid);
+	if ((reqfid < HI_FID_TABLE_BOTTOM) &&
+	    (data->currfid < HI_FID_TABLE_BOTTOM)) {
+		printk(KERN_ERR PFX "ph2: illegal lo-lo transition "
+				"0x%x 0x%x\n", reqfid, data->currfid);
 		return 1;
 	}
 
 	if (data->currfid == reqfid) {
-		printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n", data->currfid);
+		printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
+				data->currfid);
 		return 0;
 	}
 
-	dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid 0x%x\n",
+	dprintk("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, "
+		"reqfid 0x%x\n",
 		smp_processor_id(),
 		data->currfid, data->currvid, reqfid);
 
@@ -390,14 +414,14 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 
 		if (reqfid > data->currfid) {
 			if (data->currfid > LO_FID_TABLE_TOP) {
-				if (write_new_fid(data, data->currfid + fid_interval)) {
+				if (write_new_fid(data,
+						data->currfid + fid_interval))
 					return 1;
-				}
 			} else {
 				if (write_new_fid
-				    (data, 2 + convert_fid_to_vco_fid(data->currfid))) {
+				    (data,
+				     2 + convert_fid_to_vco_fid(data->currfid)))
 					return 1;
-				}
 			}
 		} else {
 			if (write_new_fid(data, data->currfid - fid_interval))
@@ -417,7 +441,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 
 	if (data->currfid != reqfid) {
 		printk(KERN_ERR PFX
-			"ph2: mismatch, failed fid transition, curr 0x%x, req 0x%x\n",
+			"ph2: mismatch, failed fid transition, "
+			"curr 0x%x, req 0x%x\n",
 			data->currfid, reqfid);
 		return 1;
 	}
@@ -435,7 +460,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 }
 
 /* Phase 3 - core voltage transition flow ... jump to the final vid. */
-static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvid)
+static int core_voltage_post_transition(struct powernow_k8_data *data,
+		u32 reqvid)
 {
 	u32 savefid = data->currfid;
 	u32 savereqvid = reqvid;
@@ -457,7 +483,8 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi
 
 		if (data->currvid != reqvid) {
 			printk(KERN_ERR PFX
-			       "ph3: failed vid transition\n, req 0x%x, curr 0x%x",
+			       "ph3: failed vid transition\n, "
+			       "req 0x%x, curr 0x%x",
 			       reqvid, data->currvid);
 			return 1;
 		}
@@ -508,7 +535,8 @@ static int check_supported_cpu(unsigned int cpu)
 	if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
 		if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
 		    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) {
-			printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
+			printk(KERN_INFO PFX
+				"Processor cpuid %x not supported\n", eax);
 			goto out;
 		}
 
@@ -520,8 +548,10 @@ static int check_supported_cpu(unsigned int cpu)
 		}
 
 		cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
-		if ((edx & P_STATE_TRANSITION_CAPABLE) != P_STATE_TRANSITION_CAPABLE) {
-			printk(KERN_INFO PFX "Power state transitions not supported\n");
+		if ((edx & P_STATE_TRANSITION_CAPABLE)
+			!= P_STATE_TRANSITION_CAPABLE) {
+			printk(KERN_INFO PFX
+				"Power state transitions not supported\n");
 			goto out;
 		}
 	} else { /* must be a HW Pstate capable processor */
@@ -539,7 +569,8 @@ out:
 	return rc;
 }
 
-static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
+static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst,
+		u8 maxvid)
 {
 	unsigned int j;
 	u8 lastfid = 0xff;
@@ -550,12 +581,14 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8
 			       j, pst[j].vid);
 			return -EINVAL;
 		}
-		if (pst[j].vid < data->rvo) {	/* vid + rvo >= 0 */
+		if (pst[j].vid < data->rvo) {
+			/* vid + rvo >= 0 */
 			printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate"
 			       " %d\n", j);
 			return -ENODEV;
 		}
-		if (pst[j].vid < maxvid + data->rvo) {	/* vid + rvo >= maxvid */
+		if (pst[j].vid < maxvid + data->rvo) {
+			/* vid + rvo >= maxvid */
 			printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate"
 			       " %d\n", j);
 			return -ENODEV;
@@ -579,23 +612,31 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8
 		return -EINVAL;
 	}
 	if (lastfid > LO_FID_TABLE_TOP)
-		printk(KERN_INFO FW_BUG PFX  "first fid not from lo freq table\n");
+		printk(KERN_INFO FW_BUG PFX
+			"first fid not from lo freq table\n");
 
 	return 0;
 }
 
+static void invalidate_entry(struct powernow_k8_data *data, unsigned int entry)
+{
+	data->powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
+}
+
 static void print_basics(struct powernow_k8_data *data)
 {
 	int j;
 	for (j = 0; j < data->numps; j++) {
-		if (data->powernow_table[j].frequency != CPUFREQ_ENTRY_INVALID) {
+		if (data->powernow_table[j].frequency !=
+				CPUFREQ_ENTRY_INVALID) {
 			if (cpu_family == CPU_HW_PSTATE) {
-				printk(KERN_INFO PFX "   %d : pstate %d (%d MHz)\n",
-					j,
+				printk(KERN_INFO PFX
+					"   %d : pstate %d (%d MHz)\n", j,
 					data->powernow_table[j].index,
 					data->powernow_table[j].frequency/1000);
 			} else {
-				printk(KERN_INFO PFX "   %d : fid 0x%x (%d MHz), vid 0x%x\n",
+				printk(KERN_INFO PFX
+					"   %d : fid 0x%x (%d MHz), vid 0x%x\n",
 					j,
 					data->powernow_table[j].index & 0xff,
 					data->powernow_table[j].frequency/1000,
@@ -604,20 +645,25 @@ static void print_basics(struct powernow_k8_data *data)
 		}
 	}
 	if (data->batps)
-		printk(KERN_INFO PFX "Only %d pstates on battery\n", data->batps);
+		printk(KERN_INFO PFX "Only %d pstates on battery\n",
+				data->batps);
 }
 
-static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid)
+static int fill_powernow_table(struct powernow_k8_data *data,
+		struct pst_s *pst, u8 maxvid)
 {
 	struct cpufreq_frequency_table *powernow_table;
 	unsigned int j;
 
-	if (data->batps) {    /* use ACPI support to get full speed on mains power */
-		printk(KERN_WARNING PFX "Only %d pstates usable (use ACPI driver for full range\n", data->batps);
+	if (data->batps) {
+		/* use ACPI support to get full speed on mains power */
+		printk(KERN_WARNING PFX
+			"Only %d pstates usable (use ACPI driver for full "
+			"range\n", data->batps);
 		data->numps = data->batps;
 	}
 
-	for ( j=1; j<data->numps; j++ ) {
+	for (j = 1; j < data->numps; j++) {
 		if (pst[j-1].fid >= pst[j].fid) {
 			printk(KERN_ERR PFX "PST out of sequence\n");
 			return -EINVAL;
@@ -640,9 +686,11 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst,
 	}
 
 	for (j = 0; j < data->numps; j++) {
+		int freq;
 		powernow_table[j].index = pst[j].fid; /* lower 8 bits */
 		powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */
-		powernow_table[j].frequency = find_khz_freq_from_fid(pst[j].fid);
+		freq = find_khz_freq_from_fid(pst[j].fid);
+		powernow_table[j].frequency = freq;
 	}
 	powernow_table[data->numps].frequency = CPUFREQ_TABLE_END;
 	powernow_table[data->numps].index = 0;
@@ -654,11 +702,12 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst,
 
 	dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
 	data->powernow_table = powernow_table;
-	if (first_cpu(per_cpu(cpu_core_map, data->cpu)) == data->cpu)
+	if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
 		print_basics(data);
 
 	for (j = 0; j < data->numps; j++)
-		if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid))
+		if ((pst[j].fid == data->currfid) &&
+		    (pst[j].vid == data->currvid))
 			return 0;
 
 	dprintk("currfid/vid do not match PST, ignoring\n");
@@ -698,7 +747,8 @@ static int find_psb_table(struct powernow_k8_data *data)
 		}
 
 		data->vstable = psb->vstable;
-		dprintk("voltage stabilization time: %d(*20us)\n", data->vstable);
+		dprintk("voltage stabilization time: %d(*20us)\n",
+				data->vstable);
 
 		dprintk("flags2: 0x%x\n", psb->flags2);
 		data->rvo = psb->flags2 & 3;
@@ -713,11 +763,12 @@ static int find_psb_table(struct powernow_k8_data *data)
 
 		dprintk("numpst: 0x%x\n", psb->num_tables);
 		cpst = psb->num_tables;
-		if ((psb->cpuid == 0x00000fc0) || (psb->cpuid == 0x00000fe0) ){
+		if ((psb->cpuid == 0x00000fc0) ||
+		    (psb->cpuid == 0x00000fe0)) {
 			thiscpuid = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
-			if ((thiscpuid == 0x00000fc0) || (thiscpuid == 0x00000fe0) ) {
+			if ((thiscpuid == 0x00000fc0) ||
+			    (thiscpuid == 0x00000fe0))
 				cpst = 1;
-			}
 		}
 		if (cpst != 1) {
 			printk(KERN_ERR FW_BUG PFX "numpst must be 1\n");
@@ -732,7 +783,8 @@ static int find_psb_table(struct powernow_k8_data *data)
 
 		data->numps = psb->numps;
 		dprintk("numpstates: 0x%x\n", data->numps);
-		return fill_powernow_table(data, (struct pst_s *)(psb+1), maxvid);
+		return fill_powernow_table(data,
+				(struct pst_s *)(psb+1), maxvid);
 	}
 	/*
 	 * If you see this message, complain to BIOS manufacturer. If
@@ -745,28 +797,31 @@ static int find_psb_table(struct powernow_k8_data *data)
 	 * BIOS and Kernel Developer's Guide, which is available on
 	 * www.amd.com
 	 */
-	printk(KERN_ERR PFX "BIOS error - no PSB or ACPI _PSS objects\n");
+	printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n");
 	return -ENODEV;
 }
 
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
-static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index)
+static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
+		unsigned int index)
 {
+	acpi_integer control;
+
 	if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE))
 		return;
 
-	data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
-	data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
-	data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
-	data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
-	data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
-	data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
-}
+	control = data->acpi_data.states[index].control; data->irt = (control
+			>> IRT_SHIFT) & IRT_MASK; data->rvo = (control >>
+				RVO_SHIFT) & RVO_MASK; data->exttype = (control
+					>> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
+	data->plllock = (control >> PLL_L_SHIFT) & PLL_L_MASK; data->vidmvs = 1
+		<< ((control >> MVS_SHIFT) & MVS_MASK); data->vstable =
+		(control >> VST_SHIFT) & VST_MASK; }
 
 static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 {
 	struct cpufreq_frequency_table *powernow_table;
 	int ret_val = -ENODEV;
+	acpi_integer space_id;
 
 	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
 		dprintk("register performance failed: bad ACPI data\n");
@@ -779,11 +834,12 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 		goto err_out;
 	}
 
-	if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
-		(data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+	space_id = data->acpi_data.control_register.space_id;
+	if ((space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+		(space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
 		dprintk("Invalid control/status registers (%x - %x)\n",
 			data->acpi_data.control_register.space_id,
-			data->acpi_data.status_register.space_id);
+			space_id);
 		goto err_out;
 	}
 
@@ -802,13 +858,14 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 	if (ret_val)
 		goto err_out_mem;
 
-	powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
+	powernow_table[data->acpi_data.state_count].frequency =
+		CPUFREQ_TABLE_END;
 	powernow_table[data->acpi_data.state_count].index = 0;
 	data->powernow_table = powernow_table;
 
 	/* fill in data */
 	data->numps = data->acpi_data.state_count;
-	if (first_cpu(per_cpu(cpu_core_map, data->cpu)) == data->cpu)
+	if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
 		print_basics(data);
 	powernow_k8_acpi_pst_values(data, 0);
 
@@ -830,13 +887,15 @@ err_out_mem:
 err_out:
 	acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
 
-	/* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
+	/* data->acpi_data.state_count informs us at ->exit()
+	 * whether ACPI was used */
 	data->acpi_data.state_count = 0;
 
 	return ret_val;
 }
 
-static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table)
+static int fill_powernow_table_pstate(struct powernow_k8_data *data,
+		struct cpufreq_frequency_table *powernow_table)
 {
 	int i;
 	u32 hi = 0, lo = 0;
@@ -848,84 +907,101 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpuf
 
 		index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
 		if (index > data->max_hw_pstate) {
-			printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index);
-			printk(KERN_ERR PFX "Please report to BIOS manufacturer\n");
-			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			printk(KERN_ERR PFX "invalid pstate %d - "
+					"bad value %d.\n", i, index);
+			printk(KERN_ERR PFX "Please report to BIOS "
+					"manufacturer\n");
+			invalidate_entry(data, i);
 			continue;
 		}
 		rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
 		if (!(hi & HW_PSTATE_VALID_MASK)) {
 			dprintk("invalid pstate %d, ignoring\n", index);
-			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			invalidate_entry(data, i);
 			continue;
 		}
 
 		powernow_table[i].index = index;
 
-		powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000;
+		powernow_table[i].frequency =
+			data->acpi_data.states[i].core_frequency * 1000;
 	}
 	return 0;
 }
 
-static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table)
+static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
+		struct cpufreq_frequency_table *powernow_table)
 {
 	int i;
 	int cntlofreq = 0;
+
 	for (i = 0; i < data->acpi_data.state_count; i++) {
 		u32 fid;
 		u32 vid;
+		u32 freq, index;
+		acpi_integer status, control;
 
 		if (data->exttype) {
-			fid = data->acpi_data.states[i].status & EXT_FID_MASK;
-			vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK;
+			status =  data->acpi_data.states[i].status;
+			fid = status & EXT_FID_MASK;
+			vid = (status >> VID_SHIFT) & EXT_VID_MASK;
 		} else {
-			fid = data->acpi_data.states[i].control & FID_MASK;
-			vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+			control =  data->acpi_data.states[i].control;
+			fid = control & FID_MASK;
+			vid = (control >> VID_SHIFT) & VID_MASK;
 		}
 
 		dprintk("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
 
-		powernow_table[i].index = fid; /* lower 8 bits */
-		powernow_table[i].index |= (vid << 8); /* upper 8 bits */
-		powernow_table[i].frequency = find_khz_freq_from_fid(fid);
+		index = fid | (vid<<8);
+		powernow_table[i].index = index;
+
+		freq = find_khz_freq_from_fid(fid);
+		powernow_table[i].frequency = freq;
 
 		/* verify frequency is OK */
-		if ((powernow_table[i].frequency > (MAX_FREQ * 1000)) ||
-			(powernow_table[i].frequency < (MIN_FREQ * 1000))) {
-			dprintk("invalid freq %u kHz, ignoring\n", powernow_table[i].frequency);
-			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+		if ((freq > (MAX_FREQ * 1000)) || (freq < (MIN_FREQ * 1000))) {
+			dprintk("invalid freq %u kHz, ignoring\n", freq);
+			invalidate_entry(data, i);
 			continue;
 		}
 
-		/* verify voltage is OK - BIOSs are using "off" to indicate invalid */
+		/* verify voltage is OK -
+		 * BIOSs are using "off" to indicate invalid */
 		if (vid == VID_OFF) {
 			dprintk("invalid vid %u, ignoring\n", vid);
-			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			invalidate_entry(data, i);
 			continue;
 		}
 
 		/* verify only 1 entry from the lo frequency table */
 		if (fid < HI_FID_TABLE_BOTTOM) {
 			if (cntlofreq) {
-				/* if both entries are the same, ignore this one ... */
-				if ((powernow_table[i].frequency != powernow_table[cntlofreq].frequency) ||
-				    (powernow_table[i].index != powernow_table[cntlofreq].index)) {
-					printk(KERN_ERR PFX "Too many lo freq table entries\n");
+				/* if both entries are the same,
+				 * ignore this one ... */
+				if ((freq != powernow_table[cntlofreq].frequency) ||
+				    (index != powernow_table[cntlofreq].index)) {
+					printk(KERN_ERR PFX
+						"Too many lo freq table "
+						"entries\n");
 					return 1;
 				}
 
-				dprintk("double low frequency table entry, ignoring it.\n");
-				powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+				dprintk("double low frequency table entry, "
+						"ignoring it.\n");
+				invalidate_entry(data, i);
 				continue;
 			} else
 				cntlofreq = i;
 		}
 
-		if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
-			printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
-				powernow_table[i].frequency,
-				(unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
-			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+		if (freq != (data->acpi_data.states[i].core_frequency * 1000)) {
+			printk(KERN_INFO PFX "invalid freq entries "
+				"%u kHz vs. %u kHz\n", freq,
+				(unsigned int)
+				(data->acpi_data.states[i].core_frequency
+				 * 1000));
+			invalidate_entry(data, i);
 			continue;
 		}
 	}
@@ -935,7 +1011,8 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpuf
 static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
 {
 	if (data->acpi_data.state_count)
-		acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
+		acpi_processor_unregister_performance(&data->acpi_data,
+				data->cpu);
 	free_cpumask_var(data->acpi_data.shared_cpu_map);
 }
 
@@ -953,15 +1030,9 @@ static int get_transition_latency(struct powernow_k8_data *data)
 	return 1000 * max_latency;
 }
 
-#else
-static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; }
-static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; }
-static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
-static int get_transition_latency(struct powernow_k8_data *data) { return 0; }
-#endif /* CONFIG_X86_POWERNOW_K8_ACPI */
-
 /* Take a frequency, and issue the fid/vid transition command */
-static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned int index)
+static int transition_frequency_fidvid(struct powernow_k8_data *data,
+		unsigned int index)
 {
 	u32 fid = 0;
 	u32 vid = 0;
@@ -989,7 +1060,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 		return 0;
 	}
 
-	if ((fid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
+	if ((fid < HI_FID_TABLE_BOTTOM) &&
+	    (data->currfid < HI_FID_TABLE_BOTTOM)) {
 		printk(KERN_ERR PFX
 		       "ignoring illegal change in lo freq table-%x to 0x%x\n",
 		       data->currfid, fid);
@@ -1017,7 +1089,8 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 }
 
 /* Take a frequency, and issue the hardware pstate transition command */
-static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index)
+static int transition_frequency_pstate(struct powernow_k8_data *data,
+		unsigned int index)
 {
 	u32 pstate = 0;
 	int res, i;
@@ -1029,7 +1102,8 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 	pstate = index & HW_PSTATE_MASK;
 	if (pstate > data->max_hw_pstate)
 		return 0;
-	freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
+	freqs.old = find_khz_freq_from_pstate(data->powernow_table,
+			data->currpstate);
 	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
 	for_each_cpu_mask_nr(i, *(data->available_cores)) {
@@ -1048,7 +1122,8 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 }
 
 /* Driver entry point to switch to the target frequency */
-static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
+static int powernowk8_target(struct cpufreq_policy *pol,
+		unsigned targfreq, unsigned relation)
 {
 	cpumask_t oldmask;
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
@@ -1087,14 +1162,18 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 		dprintk("targ: curr fid 0x%x, vid 0x%x\n",
 		data->currfid, data->currvid);
 
-		if ((checkvid != data->currvid) || (checkfid != data->currfid)) {
+		if ((checkvid != data->currvid) ||
+		    (checkfid != data->currfid)) {
 			printk(KERN_INFO PFX
-				"error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
-				checkfid, data->currfid, checkvid, data->currvid);
+				"error - out of sync, fix 0x%x 0x%x, "
+				"vid 0x%x 0x%x\n",
+				checkfid, data->currfid,
+				checkvid, data->currvid);
 		}
 	}
 
-	if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate))
+	if (cpufreq_frequency_table_target(pol, data->powernow_table,
+				targfreq, relation, &newstate))
 		goto err_out;
 
 	mutex_lock(&fidvid_mutex);
@@ -1114,7 +1193,8 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 	mutex_unlock(&fidvid_mutex);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		pol->cur = find_khz_freq_from_pstate(data->powernow_table, newstate);
+		pol->cur = find_khz_freq_from_pstate(data->powernow_table,
+				newstate);
 	else
 		pol->cur = find_khz_freq_from_fid(data->currfid);
 	ret = 0;
@@ -1141,6 +1221,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	struct powernow_k8_data *data;
 	cpumask_t oldmask;
 	int rc;
+	static int print_once;
 
 	if (!cpu_online(pol->cpu))
 		return -ENODEV;
@@ -1163,33 +1244,31 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		 * an UP version, and is deprecated by AMD.
 		 */
 		if (num_online_cpus() != 1) {
-#ifndef CONFIG_ACPI_PROCESSOR
-			printk(KERN_ERR PFX "ACPI Processor support is required "
-			       "for SMP systems but is absent. Please load the "
-			       "ACPI Processor module before starting this "
-			       "driver.\n");
-#else
-			printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide"
-			       " ACPI _PSS objects in a way that Linux "
-			       "understands. Please report this to the Linux "
-			       "ACPI maintainers and complain to your BIOS "
-			       "vendor.\n");
-#endif
-			kfree(data);
-			return -ENODEV;
+			/*
+			 * Replace this one with print_once as soon as such a
+			 * thing gets introduced
+			 */
+			if (!print_once) {
+				WARN_ONCE(1, KERN_ERR FW_BUG PFX "Your BIOS "
+					"does not provide ACPI _PSS objects "
+					"in a way that Linux understands. "
+					"Please report this to the Linux ACPI"
+					" maintainers and complain to your "
+					"BIOS vendor.\n");
+				print_once++;
+			}
+			goto err_out;
 		}
 		if (pol->cpu != 0) {
 			printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
 			       "CPU other than CPU0. Complain to your BIOS "
 			       "vendor.\n");
-			kfree(data);
-			return -ENODEV;
+			goto err_out;
 		}
 		rc = find_psb_table(data);
-		if (rc) {
-			kfree(data);
-			return -ENODEV;
-		}
+		if (rc)
+			goto err_out;
+
 		/* Take a crude guess here.
 		 * That guess was in microseconds, so multiply with 1000 */
 		pol->cpuinfo.transition_latency = (
@@ -1204,16 +1283,16 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
-		goto err_out;
+		goto err_out_unmask;
 	}
 
 	if (pending_bit_stuck()) {
 		printk(KERN_ERR PFX "failing init, change pending bit set\n");
-		goto err_out;
+		goto err_out_unmask;
 	}
 
 	if (query_current_values_with_pending_wait(data))
-		goto err_out;
+		goto err_out_unmask;
 
 	if (cpu_family == CPU_OPTERON)
 		fidvid_msr_init();
@@ -1224,11 +1303,12 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	if (cpu_family == CPU_HW_PSTATE)
 		cpumask_copy(pol->cpus, cpumask_of(pol->cpu));
 	else
-		cpumask_copy(pol->cpus, &per_cpu(cpu_core_map, pol->cpu));
+		cpumask_copy(pol->cpus, cpu_core_mask(pol->cpu));
 	data->available_cores = pol->cpus;
 
 	if (cpu_family == CPU_HW_PSTATE)
-		pol->cur = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
+		pol->cur = find_khz_freq_from_pstate(data->powernow_table,
+				data->currpstate);
 	else
 		pol->cur = find_khz_freq_from_fid(data->currfid);
 	dprintk("policy current frequency %d kHz\n", pol->cur);
@@ -1245,7 +1325,8 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		dprintk("cpu_init done, current pstate 0x%x\n", data->currpstate);
+		dprintk("cpu_init done, current pstate 0x%x\n",
+				data->currpstate);
 	else
 		dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n",
 			data->currfid, data->currvid);
@@ -1254,15 +1335,16 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	return 0;
 
-err_out:
+err_out_unmask:
 	set_cpus_allowed_ptr(current, &oldmask);
 	powernow_k8_cpu_exit_acpi(data);
 
+err_out:
 	kfree(data);
 	return -ENODEV;
 }
 
-static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol)
+static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 
@@ -1279,14 +1361,14 @@ static int __devexit powernowk8_cpu_exit (struct cpufreq_policy *pol)
 	return 0;
 }
 
-static unsigned int powernowk8_get (unsigned int cpu)
+static unsigned int powernowk8_get(unsigned int cpu)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask = current->cpus_allowed;
 	unsigned int khz = 0;
 	unsigned int first;
 
-	first = first_cpu(per_cpu(cpu_core_map, cpu));
+	first = cpumask_first(cpu_core_mask(cpu));
 	data = per_cpu(powernow_data, first);
 
 	if (!data)
@@ -1315,7 +1397,7 @@ out:
 	return khz;
 }
 
-static struct freq_attr* powernow_k8_attr[] = {
+static struct freq_attr *powernow_k8_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -1360,7 +1442,8 @@ static void __exit powernowk8_exit(void)
 	cpufreq_unregister_driver(&cpufreq_amd64_driver);
 }
 
-MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>");
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and "
+		"Mark Langsdorf <mark.langsdorf@amd.com>");
 MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
 MODULE_LICENSE("GPL");
 
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index 8ecc75b..6c6698f 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -45,11 +45,10 @@ struct powernow_k8_data {
 	 * frequency is in kHz */
 	struct cpufreq_frequency_table  *powernow_table;
 
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
 	/* the acpi table needs to be kept. it's only available if ACPI was
 	 * used to determine valid frequency/vid/fid states */
 	struct acpi_processor_performance acpi_data;
-#endif
+
 	/* we need to keep track of associated cores, but let cpufreq
 	 * handle hotplug events - so just point at cpufreq pol->cpus
 	 * structure */
@@ -222,10 +221,8 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
 
 static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
 
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
 static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
 static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
-#endif
 
 #ifdef CONFIG_SMP
 static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])
diff --git a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c
index 42da9bd..435a996 100644
--- a/arch/x86/kernel/cpu/cpufreq/sc520_freq.c
+++ b/arch/x86/kernel/cpu/cpufreq/sc520_freq.c
@@ -19,17 +19,19 @@
 
 #include <linux/delay.h>
 #include <linux/cpufreq.h>
+#include <linux/timex.h>
+#include <linux/io.h>
 
 #include <asm/msr.h>
-#include <asm/timex.h>
-#include <asm/io.h>
 
 #define MMCR_BASE	0xfffef000	/* The default base address */
 #define OFFS_CPUCTL	0x2   /* CPU Control Register */
 
 static __u8 __iomem *cpuctl;
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "sc520_freq", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"sc520_freq", msg)
+#define PFX "sc520_freq: "
 
 static struct cpufreq_frequency_table sc520_freq_table[] = {
 	{0x01,	100000},
@@ -43,7 +45,8 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
 
 	switch (clockspeed_reg & 0x03) {
 	default:
-		printk(KERN_ERR "sc520_freq: error: cpuctl register has unexpected value %02x\n", clockspeed_reg);
+		printk(KERN_ERR PFX "error: cpuctl register has unexpected "
+				"value %02x\n", clockspeed_reg);
 	case 0x01:
 		return 100000;
 	case 0x02:
@@ -51,7 +54,7 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
 	}
 }
 
-static void sc520_freq_set_cpu_state (unsigned int state)
+static void sc520_freq_set_cpu_state(unsigned int state)
 {
 
 	struct cpufreq_freqs	freqs;
@@ -76,18 +79,19 @@ static void sc520_freq_set_cpu_state (unsigned int state)
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 };
 
-static int sc520_freq_verify (struct cpufreq_policy *policy)
+static int sc520_freq_verify(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, &sc520_freq_table[0]);
 }
 
-static int sc520_freq_target (struct cpufreq_policy *policy,
+static int sc520_freq_target(struct cpufreq_policy *policy,
 			    unsigned int target_freq,
 			    unsigned int relation)
 {
 	unsigned int newstate = 0;
 
-	if (cpufreq_frequency_table_target(policy, sc520_freq_table, target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, sc520_freq_table,
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	sc520_freq_set_cpu_state(newstate);
@@ -116,7 +120,7 @@ static int sc520_freq_cpu_init(struct cpufreq_policy *policy)
 
 	result = cpufreq_frequency_table_cpuinfo(policy, sc520_freq_table);
 	if (result)
-		return (result);
+		return result;
 
 	cpufreq_frequency_table_get_attr(sc520_freq_table, policy->cpu);
 
@@ -131,7 +135,7 @@ static int sc520_freq_cpu_exit(struct cpufreq_policy *policy)
 }
 
 
-static struct freq_attr* sc520_freq_attr[] = {
+static struct freq_attr *sc520_freq_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -155,13 +159,13 @@ static int __init sc520_freq_init(void)
 	int err;
 
 	/* Test if we have the right hardware */
-	if(c->x86_vendor != X86_VENDOR_AMD ||
-				c->x86 != 4 || c->x86_model != 9) {
+	if (c->x86_vendor != X86_VENDOR_AMD ||
+	    c->x86 != 4 || c->x86_model != 9) {
 		dprintk("no Elan SC520 processor found!\n");
 		return -ENODEV;
 	}
 	cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
-	if(!cpuctl) {
+	if (!cpuctl) {
 		printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
 		return -ENOMEM;
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index dedc1e9..016c1a4 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -39,7 +39,7 @@ static struct pci_dev *speedstep_chipset_dev;
 
 /* speedstep_processor
  */
-static unsigned int speedstep_processor = 0;
+static unsigned int speedstep_processor;
 
 static u32 pmbase;
 
@@ -54,7 +54,8 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
 };
 
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-ich", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"speedstep-ich", msg)
 
 
 /**
@@ -62,7 +63,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
  *
  * Returns: -ENODEV if no register could be found
  */
-static int speedstep_find_register (void)
+static int speedstep_find_register(void)
 {
 	if (!speedstep_chipset_dev)
 		return -ENODEV;
@@ -90,7 +91,7 @@ static int speedstep_find_register (void)
  *
  *   Tries to change the SpeedStep state.
  */
-static void speedstep_set_state (unsigned int state)
+static void speedstep_set_state(unsigned int state)
 {
 	u8 pm2_blk;
 	u8 value;
@@ -133,11 +134,11 @@ static void speedstep_set_state (unsigned int state)
 
 	dprintk("read at pmbase 0x%x + 0x50 returned 0x%x\n", pmbase, value);
 
-	if (state == (value & 0x1)) {
-		dprintk("change to %u MHz succeeded\n", (speedstep_get_processor_frequency(speedstep_processor) / 1000));
-	} else {
-		printk (KERN_ERR "cpufreq: change failed - I/O error\n");
-	}
+	if (state == (value & 0x1))
+		dprintk("change to %u MHz succeeded\n",
+			speedstep_get_frequency(speedstep_processor) / 1000);
+	else
+		printk(KERN_ERR "cpufreq: change failed - I/O error\n");
 
 	return;
 }
@@ -149,7 +150,7 @@ static void speedstep_set_state (unsigned int state)
  *   Tries to activate the SpeedStep status and control registers.
  * Returns -EINVAL on an unsupported chipset, and zero on success.
  */
-static int speedstep_activate (void)
+static int speedstep_activate(void)
 {
 	u16 value = 0;
 
@@ -175,20 +176,18 @@ static int speedstep_activate (void)
  * functions. Returns the SPEEDSTEP_CHIPSET_-number for the detected
  * chipset, or zero on failure.
  */
-static unsigned int speedstep_detect_chipset (void)
+static unsigned int speedstep_detect_chipset(void)
 {
 	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82801DB_12,
-			      PCI_ANY_ID,
-			      PCI_ANY_ID,
+			      PCI_ANY_ID, PCI_ANY_ID,
 			      NULL);
 	if (speedstep_chipset_dev)
 		return 4; /* 4-M */
 
 	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82801CA_12,
-			      PCI_ANY_ID,
-			      PCI_ANY_ID,
+			      PCI_ANY_ID, PCI_ANY_ID,
 			      NULL);
 	if (speedstep_chipset_dev)
 		return 3; /* 3-M */
@@ -196,8 +195,7 @@ static unsigned int speedstep_detect_chipset (void)
 
 	speedstep_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82801BA_10,
-			      PCI_ANY_ID,
-			      PCI_ANY_ID,
+			      PCI_ANY_ID, PCI_ANY_ID,
 			      NULL);
 	if (speedstep_chipset_dev) {
 		/* speedstep.c causes lockups on Dell Inspirons 8000 and
@@ -208,8 +206,7 @@ static unsigned int speedstep_detect_chipset (void)
 
 		hostbridge  = pci_get_subsys(PCI_VENDOR_ID_INTEL,
 			      PCI_DEVICE_ID_INTEL_82815_MC,
-			      PCI_ANY_ID,
-			      PCI_ANY_ID,
+			      PCI_ANY_ID, PCI_ANY_ID,
 			      NULL);
 
 		if (!hostbridge)
@@ -236,7 +233,7 @@ static unsigned int _speedstep_get(const struct cpumask *cpus)
 
 	cpus_allowed = current->cpus_allowed;
 	set_cpus_allowed_ptr(current, cpus);
-	speed = speedstep_get_processor_frequency(speedstep_processor);
+	speed = speedstep_get_frequency(speedstep_processor);
 	set_cpus_allowed_ptr(current, &cpus_allowed);
 	dprintk("detected %u kHz as current frequency\n", speed);
 	return speed;
@@ -251,11 +248,12 @@ static unsigned int speedstep_get(unsigned int cpu)
  * speedstep_target - set a new CPUFreq policy
  * @policy: new policy
  * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ * @relation: how that frequency relates to achieved frequency
+ *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
  *
  * Sets a new CPUFreq policy.
  */
-static int speedstep_target (struct cpufreq_policy *policy,
+static int speedstep_target(struct cpufreq_policy *policy,
 			     unsigned int target_freq,
 			     unsigned int relation)
 {
@@ -264,7 +262,8 @@ static int speedstep_target (struct cpufreq_policy *policy,
 	cpumask_t cpus_allowed;
 	int i;
 
-	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	freqs.old = _speedstep_get(policy->cpus);
@@ -308,7 +307,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
  * Limit must be within speedstep_low_freq and speedstep_high_freq, with
  * at least one border included.
  */
-static int speedstep_verify (struct cpufreq_policy *policy)
+static int speedstep_verify(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
 }
@@ -322,7 +321,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 
 	/* only run on CPU to be set, or on its sibling */
 #ifdef CONFIG_SMP
-	cpumask_copy(policy->cpus, &per_cpu(cpu_sibling_map, policy->cpu));
+	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
 #endif
 
 	cpus_allowed = current->cpus_allowed;
@@ -344,7 +343,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 		return -EIO;
 
 	dprintk("currently at %s speed setting - %i MHz\n",
-		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
+		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
+		? "low" : "high",
 		(speed / 1000));
 
 	/* cpuinfo and default policy values */
@@ -352,9 +352,9 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 
 	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
 	if (result)
-		return (result);
+		return result;
 
-        cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
+	cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
 
 	return 0;
 }
@@ -366,7 +366,7 @@ static int speedstep_cpu_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct freq_attr* speedstep_attr[] = {
+static struct freq_attr *speedstep_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -396,13 +396,15 @@ static int __init speedstep_init(void)
 	/* detect processor */
 	speedstep_processor = speedstep_detect_processor();
 	if (!speedstep_processor) {
-		dprintk("Intel(R) SpeedStep(TM) capable processor not found\n");
+		dprintk("Intel(R) SpeedStep(TM) capable processor "
+				"not found\n");
 		return -ENODEV;
 	}
 
 	/* detect chipset */
 	if (!speedstep_detect_chipset()) {
-		dprintk("Intel(R) SpeedStep(TM) for this chipset not (yet) available.\n");
+		dprintk("Intel(R) SpeedStep(TM) for this chipset not "
+				"(yet) available.\n");
 		return -ENODEV;
 	}
 
@@ -431,9 +433,11 @@ static void __exit speedstep_exit(void)
 }
 
 
-MODULE_AUTHOR ("Dave Jones <davej@redhat.com>, Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("Speedstep driver for Intel mobile processors on chipsets with ICH-M southbridges.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dave Jones <davej@redhat.com>, "
+		"Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Speedstep driver for Intel mobile processors on chipsets "
+		"with ICH-M southbridges.");
+MODULE_LICENSE("GPL");
 
 module_init(speedstep_init);
 module_exit(speedstep_exit);
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
index cdac7d6..2e3c686 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c
@@ -16,12 +16,16 @@
 #include <linux/slab.h>
 
 #include <asm/msr.h>
+#include <asm/tsc.h>
 #include "speedstep-lib.h"
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-lib", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"speedstep-lib", msg)
+
+#define PFX "speedstep-lib: "
 
 #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
-static int relaxed_check = 0;
+static int relaxed_check;
 #else
 #define relaxed_check 0
 #endif
@@ -30,14 +34,14 @@ static int relaxed_check = 0;
  *                   GET PROCESSOR CORE SPEED IN KHZ                 *
  *********************************************************************/
 
-static unsigned int pentium3_get_frequency (unsigned int processor)
+static unsigned int pentium3_get_frequency(unsigned int processor)
 {
-        /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
+	/* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */
 	struct {
 		unsigned int ratio;	/* Frequency Multiplier (x10) */
 		u8 bitmap;		/* power on configuration bits
 					[27, 25:22] (in MSR 0x2a) */
-	} msr_decode_mult [] = {
+	} msr_decode_mult[] = {
 		{ 30, 0x01 },
 		{ 35, 0x05 },
 		{ 40, 0x02 },
@@ -52,7 +56,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
 		{ 85, 0x26 },
 		{ 90, 0x20 },
 		{ 100, 0x2b },
-		{ 0, 0xff }     /* error or unknown value */
+		{ 0, 0xff }	/* error or unknown value */
 	};
 
 	/* PIII(-M) FSB settings: see table b1-b of 24547206.pdf */
@@ -60,7 +64,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
 		unsigned int value;	/* Front Side Bus speed in MHz */
 		u8 bitmap;		/* power on configuration bits [18: 19]
 					(in MSR 0x2a) */
-	} msr_decode_fsb [] = {
+	} msr_decode_fsb[] = {
 		{  66, 0x0 },
 		{ 100, 0x2 },
 		{ 133, 0x1 },
@@ -85,7 +89,7 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
 	}
 
 	/* decode the multiplier */
-	if (processor == SPEEDSTEP_PROCESSOR_PIII_C_EARLY) {
+	if (processor == SPEEDSTEP_CPU_PIII_C_EARLY) {
 		dprintk("workaround for early PIIIs\n");
 		msr_lo &= 0x03c00000;
 	} else
@@ -97,9 +101,10 @@ static unsigned int pentium3_get_frequency (unsigned int processor)
 		j++;
 	}
 
-	dprintk("speed is %u\n", (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
+	dprintk("speed is %u\n",
+		(msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100));
 
-	return (msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100);
+	return msr_decode_mult[j].ratio * msr_decode_fsb[i].value * 100;
 }
 
 
@@ -112,20 +117,23 @@ static unsigned int pentiumM_get_frequency(void)
 
 	/* see table B-2 of 24547212.pdf */
 	if (msr_lo & 0x00040000) {
-		printk(KERN_DEBUG "speedstep-lib: PM - invalid FSB: 0x%x 0x%x\n", msr_lo, msr_tmp);
+		printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
+				msr_lo, msr_tmp);
 		return 0;
 	}
 
 	msr_tmp = (msr_lo >> 22) & 0x1f;
-	dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * 100 * 1000));
+	dprintk("bits 22-26 are 0x%x, speed is %u\n",
+			msr_tmp, (msr_tmp * 100 * 1000));
 
-	return (msr_tmp * 100 * 1000);
+	return msr_tmp * 100 * 1000;
 }
 
 static unsigned int pentium_core_get_frequency(void)
 {
 	u32 fsb = 0;
 	u32 msr_lo, msr_tmp;
+	int ret;
 
 	rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
 	/* see table B-2 of 25366920.pdf */
@@ -153,12 +161,15 @@ static unsigned int pentium_core_get_frequency(void)
 	}
 
 	rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
-	dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
+	dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n",
+			msr_lo, msr_tmp);
 
 	msr_tmp = (msr_lo >> 22) & 0x1f;
-	dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * fsb));
+	dprintk("bits 22-26 are 0x%x, speed is %u\n",
+			msr_tmp, (msr_tmp * fsb));
 
-	return (msr_tmp * fsb);
+	ret = (msr_tmp * fsb);
+	return ret;
 }
 
 
@@ -167,6 +178,16 @@ static unsigned int pentium4_get_frequency(void)
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 	u32 msr_lo, msr_hi, mult;
 	unsigned int fsb = 0;
+	unsigned int ret;
+	u8 fsb_code;
+
+	/* Pentium 4 Model 0 and 1 do not have the Core Clock Frequency
+	 * to System Bus Frequency Ratio Field in the Processor Frequency
+	 * Configuration Register of the MSR. Therefore the current
+	 * frequency cannot be calculated and has to be measured.
+	 */
+	if (c->x86_model < 2)
+		return cpu_khz;
 
 	rdmsr(0x2c, msr_lo, msr_hi);
 
@@ -177,62 +198,61 @@ static unsigned int pentium4_get_frequency(void)
 	 * revision #12 in Table B-1: MSRs in the Pentium 4 and
 	 * Intel Xeon Processors, on page B-4 and B-5.
 	 */
-	if (c->x86_model < 2)
+	fsb_code = (msr_lo >> 16) & 0x7;
+	switch (fsb_code) {
+	case 0:
 		fsb = 100 * 1000;
-	else {
-		u8 fsb_code = (msr_lo >> 16) & 0x7;
-		switch (fsb_code) {
-		case 0:
-			fsb = 100 * 1000;
-			break;
-		case 1:
-			fsb = 13333 * 10;
-			break;
-		case 2:
-			fsb = 200 * 1000;
-			break;
-		}
+		break;
+	case 1:
+		fsb = 13333 * 10;
+		break;
+	case 2:
+		fsb = 200 * 1000;
+		break;
 	}
 
 	if (!fsb)
-		printk(KERN_DEBUG "speedstep-lib: couldn't detect FSB speed. Please send an e-mail to <linux@brodo.de>\n");
+		printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
+				"Please send an e-mail to <linux@brodo.de>\n");
 
 	/* Multiplier. */
 	mult = msr_lo >> 24;
 
-	dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", fsb, mult, (fsb * mult));
+	dprintk("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n",
+			fsb, mult, (fsb * mult));
 
-	return (fsb * mult);
+	ret = (fsb * mult);
+	return ret;
 }
 
 
-unsigned int speedstep_get_processor_frequency(unsigned int processor)
+unsigned int speedstep_get_frequency(unsigned int processor)
 {
 	switch (processor) {
-	case SPEEDSTEP_PROCESSOR_PCORE:
+	case SPEEDSTEP_CPU_PCORE:
 		return pentium_core_get_frequency();
-	case SPEEDSTEP_PROCESSOR_PM:
+	case SPEEDSTEP_CPU_PM:
 		return pentiumM_get_frequency();
-	case SPEEDSTEP_PROCESSOR_P4D:
-	case SPEEDSTEP_PROCESSOR_P4M:
+	case SPEEDSTEP_CPU_P4D:
+	case SPEEDSTEP_CPU_P4M:
 		return pentium4_get_frequency();
-	case SPEEDSTEP_PROCESSOR_PIII_T:
-	case SPEEDSTEP_PROCESSOR_PIII_C:
-	case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
+	case SPEEDSTEP_CPU_PIII_T:
+	case SPEEDSTEP_CPU_PIII_C:
+	case SPEEDSTEP_CPU_PIII_C_EARLY:
 		return pentium3_get_frequency(processor);
 	default:
 		return 0;
 	};
 	return 0;
 }
-EXPORT_SYMBOL_GPL(speedstep_get_processor_frequency);
+EXPORT_SYMBOL_GPL(speedstep_get_frequency);
 
 
 /*********************************************************************
  *                 DETECT SPEEDSTEP-CAPABLE PROCESSOR                *
  *********************************************************************/
 
-unsigned int speedstep_detect_processor (void)
+unsigned int speedstep_detect_processor(void)
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);
 	u32 ebx, msr_lo, msr_hi;
@@ -261,7 +281,7 @@ unsigned int speedstep_detect_processor (void)
 			 * sample has ebx = 0x0f, production has 0x0e.
 			 */
 			if ((ebx == 0x0e) || (ebx == 0x0f))
-				return SPEEDSTEP_PROCESSOR_P4M;
+				return SPEEDSTEP_CPU_P4M;
 			break;
 		case 7:
 			/*
@@ -272,7 +292,7 @@ unsigned int speedstep_detect_processor (void)
 			 * samples are only of B-stepping...
 			 */
 			if (ebx == 0x0e)
-				return SPEEDSTEP_PROCESSOR_P4M;
+				return SPEEDSTEP_CPU_P4M;
 			break;
 		case 9:
 			/*
@@ -288,10 +308,13 @@ unsigned int speedstep_detect_processor (void)
 			 * M-P4-Ms may have either ebx=0xe or 0xf [see above]
 			 * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
 			 * also, M-P4M HTs have ebx=0x8, too
-			 * For now, they are distinguished by the model_id string
+			 * For now, they are distinguished by the model_id
+			 * string
 			 */
-			if ((ebx == 0x0e) || (strstr(c->x86_model_id,"Mobile Intel(R) Pentium(R) 4") != NULL))
-				return SPEEDSTEP_PROCESSOR_P4M;
+			if ((ebx == 0x0e) ||
+				(strstr(c->x86_model_id,
+				    "Mobile Intel(R) Pentium(R) 4") != NULL))
+				return SPEEDSTEP_CPU_P4M;
 			break;
 		default:
 			break;
@@ -301,7 +324,8 @@ unsigned int speedstep_detect_processor (void)
 
 	switch (c->x86_model) {
 	case 0x0B: /* Intel PIII [Tualatin] */
-		/* cpuid_ebx(1) is 0x04 for desktop PIII, 0x06 for mobile PIII-M */
+		/* cpuid_ebx(1) is 0x04 for desktop PIII,
+		 * 0x06 for mobile PIII-M */
 		ebx = cpuid_ebx(0x00000001);
 		dprintk("ebx is %x\n", ebx);
 
@@ -313,14 +337,15 @@ unsigned int speedstep_detect_processor (void)
 		/* So far all PIII-M processors support SpeedStep. See
 		 * Intel's 24540640.pdf of June 2003
 		 */
-		return SPEEDSTEP_PROCESSOR_PIII_T;
+		return SPEEDSTEP_CPU_PIII_T;
 
 	case 0x08: /* Intel PIII [Coppermine] */
 
 		/* all mobile PIII Coppermines have FSB 100 MHz
 		 * ==> sort out a few desktop PIIIs. */
 		rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_hi);
-		dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n", msr_lo, msr_hi);
+		dprintk("Coppermine: MSR_IA32_EBL_CR_POWERON is 0x%x, 0x%x\n",
+				msr_lo, msr_hi);
 		msr_lo &= 0x00c0000;
 		if (msr_lo != 0x0080000)
 			return 0;
@@ -332,13 +357,15 @@ unsigned int speedstep_detect_processor (void)
 		 * bit 56 or 57 is set
 		 */
 		rdmsr(MSR_IA32_PLATFORM_ID, msr_lo, msr_hi);
-		dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n", msr_lo, msr_hi);
-		if ((msr_hi & (1<<18)) && (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
+		dprintk("Coppermine: MSR_IA32_PLATFORM ID is 0x%x, 0x%x\n",
+				msr_lo, msr_hi);
+		if ((msr_hi & (1<<18)) &&
+		    (relaxed_check ? 1 : (msr_hi & (3<<24)))) {
 			if (c->x86_mask == 0x01) {
 				dprintk("early PIII version\n");
-				return SPEEDSTEP_PROCESSOR_PIII_C_EARLY;
+				return SPEEDSTEP_CPU_PIII_C_EARLY;
 			} else
-				return SPEEDSTEP_PROCESSOR_PIII_C;
+				return SPEEDSTEP_CPU_PIII_C;
 		}
 
 	default:
@@ -369,7 +396,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 	dprintk("trying to determine both speeds\n");
 
 	/* get current speed */
-	prev_speed = speedstep_get_processor_frequency(processor);
+	prev_speed = speedstep_get_frequency(processor);
 	if (!prev_speed)
 		return -EIO;
 
@@ -379,7 +406,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 
 	/* switch to low state */
 	set_state(SPEEDSTEP_LOW);
-	*low_speed = speedstep_get_processor_frequency(processor);
+	*low_speed = speedstep_get_frequency(processor);
 	if (!*low_speed) {
 		ret = -EIO;
 		goto out;
@@ -398,7 +425,7 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 	if (transition_latency)
 		do_gettimeofday(&tv2);
 
-	*high_speed = speedstep_get_processor_frequency(processor);
+	*high_speed = speedstep_get_frequency(processor);
 	if (!*high_speed) {
 		ret = -EIO;
 		goto out;
@@ -426,9 +453,12 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 		/* check if the latency measurement is too high or too low
 		 * and set it to a safe value (500uSec) in that case
 		 */
-		if (*transition_latency > 10000000 || *transition_latency < 50000) {
-			printk (KERN_WARNING "speedstep: frequency transition measured seems out of "
-					"range (%u nSec), falling back to a safe one of %u nSec.\n",
+		if (*transition_latency > 10000000 ||
+		    *transition_latency < 50000) {
+			printk(KERN_WARNING PFX "frequency transition "
+					"measured seems out of range (%u "
+					"nSec), falling back to a safe one of"
+					"%u nSec.\n",
 					*transition_latency, 500000);
 			*transition_latency = 500000;
 		}
@@ -436,15 +466,16 @@ unsigned int speedstep_get_freqs(unsigned int processor,
 
 out:
 	local_irq_restore(flags);
-	return (ret);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(speedstep_get_freqs);
 
 #ifdef CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK
 module_param(relaxed_check, int, 0444);
-MODULE_PARM_DESC(relaxed_check, "Don't do all checks for speedstep capability.");
+MODULE_PARM_DESC(relaxed_check,
+		"Don't do all checks for speedstep capability.");
 #endif
 
-MODULE_AUTHOR ("Dominik Brodowski <linux@brodo.de>");
-MODULE_DESCRIPTION ("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
+MODULE_DESCRIPTION("Library for Intel SpeedStep 1 or 2 cpufreq drivers.");
+MODULE_LICENSE("GPL");
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
index b11bcc6..2b6c04e 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h
@@ -12,17 +12,17 @@
 
 /* processors */
 
-#define SPEEDSTEP_PROCESSOR_PIII_C_EARLY	0x00000001  /* Coppermine core */
-#define SPEEDSTEP_PROCESSOR_PIII_C		0x00000002  /* Coppermine core */
-#define SPEEDSTEP_PROCESSOR_PIII_T		0x00000003  /* Tualatin core */
-#define SPEEDSTEP_PROCESSOR_P4M			0x00000004  /* P4-M  */
+#define SPEEDSTEP_CPU_PIII_C_EARLY	0x00000001  /* Coppermine core */
+#define SPEEDSTEP_CPU_PIII_C		0x00000002  /* Coppermine core */
+#define SPEEDSTEP_CPU_PIII_T		0x00000003  /* Tualatin core */
+#define SPEEDSTEP_CPU_P4M		0x00000004  /* P4-M  */
 
 /* the following processors are not speedstep-capable and are not auto-detected
  * in speedstep_detect_processor(). However, their speed can be detected using
- * the speedstep_get_processor_frequency() call. */
-#define SPEEDSTEP_PROCESSOR_PM			0xFFFFFF03  /* Pentium M  */
-#define SPEEDSTEP_PROCESSOR_P4D			0xFFFFFF04  /* desktop P4  */
-#define SPEEDSTEP_PROCESSOR_PCORE		0xFFFFFF05  /* Core */
+ * the speedstep_get_frequency() call. */
+#define SPEEDSTEP_CPU_PM		0xFFFFFF03  /* Pentium M  */
+#define SPEEDSTEP_CPU_P4D		0xFFFFFF04  /* desktop P4  */
+#define SPEEDSTEP_CPU_PCORE		0xFFFFFF05  /* Core */
 
 /* speedstep states -- only two of them */
 
@@ -34,7 +34,7 @@
 extern unsigned int speedstep_detect_processor (void);
 
 /* detect the current speed (in khz) of the processor */
-extern unsigned int speedstep_get_processor_frequency(unsigned int processor);
+extern unsigned int speedstep_get_frequency(unsigned int processor);
 
 
 /* detect the low and high speeds of the processor. The callback
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
index 8a85c93..befea08 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
@@ -19,8 +19,8 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/io.h>
 #include <asm/ist.h>
-#include <asm/io.h>
 
 #include "speedstep-lib.h"
 
@@ -30,12 +30,12 @@
  * If user gives it, these are used.
  *
  */
-static int smi_port = 0;
-static int smi_cmd = 0;
-static unsigned int smi_sig = 0;
+static int smi_port;
+static int smi_cmd;
+static unsigned int smi_sig;
 
 /* info about the processor */
-static unsigned int speedstep_processor = 0;
+static unsigned int speedstep_processor;
 
 /*
  * There are only two frequency states for each processor. Values
@@ -56,12 +56,13 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
  * of DMA activity going on? */
 #define SMI_TRIES 5
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-smi", msg)
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+		"speedstep-smi", msg)
 
 /**
  * speedstep_smi_ownership
  */
-static int speedstep_smi_ownership (void)
+static int speedstep_smi_ownership(void)
 {
 	u32 command, result, magic, dummy;
 	u32 function = GET_SPEEDSTEP_OWNER;
@@ -70,16 +71,18 @@ static int speedstep_smi_ownership (void)
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 	magic = virt_to_phys(magic_data);
 
-	dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
+	dprintk("trying to obtain ownership with command %x at port %x\n",
+			command, smi_port);
 
 	__asm__ __volatile__(
 		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
 		"pop %%ebp\n"
-		: "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
-			"=S" (dummy)
+		: "=D" (result),
+		  "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
+		  "=S" (dummy)
 		: "a" (command), "b" (function), "c" (0), "d" (smi_port),
-			"D" (0), "S" (magic)
+		  "D" (0), "S" (magic)
 		: "memory"
 	);
 
@@ -97,10 +100,10 @@ static int speedstep_smi_ownership (void)
  * even hangs [cf. bugme.osdl.org # 1422] on earlier systems. Empirical testing
  * shows that the latter occurs if !(ist_info.event & 0xFFFF).
  */
-static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
+static int speedstep_smi_get_freqs(unsigned int *low, unsigned int *high)
 {
 	u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
-	u32 state=0;
+	u32 state = 0;
 	u32 function = GET_SPEEDSTEP_FREQS;
 
 	if (!(ist_info.event & 0xFFFF)) {
@@ -110,17 +113,25 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 
-	dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
+	dprintk("trying to determine frequencies with command %x at port %x\n",
+			command, smi_port);
 
 	__asm__ __volatile__(
 		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
 		"pop %%ebp"
-		: "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy)
-		: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
+		: "=a" (result),
+		  "=b" (high_mhz),
+		  "=c" (low_mhz),
+		  "=d" (state), "=D" (edi), "=S" (dummy)
+		: "a" (command),
+		  "b" (function),
+		  "c" (state),
+		  "d" (smi_port), "S" (0), "D" (0)
 	);
 
-	dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
+	dprintk("result %x, low_freq %u, high_freq %u\n",
+			result, low_mhz, high_mhz);
 
 	/* abort if results are obviously incorrect... */
 	if ((high_mhz + low_mhz) < 600)
@@ -137,26 +148,30 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
  * @state: processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
  *
  */
-static int speedstep_get_state (void)
+static int speedstep_get_state(void)
 {
-	u32 function=GET_SPEEDSTEP_STATE;
+	u32 function = GET_SPEEDSTEP_STATE;
 	u32 result, state, edi, command, dummy;
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 
-	dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
+	dprintk("trying to determine current setting with command %x "
+		"at port %x\n", command, smi_port);
 
 	__asm__ __volatile__(
 		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
 		"pop %%ebp\n"
-		: "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy)
-		: "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0)
+		: "=a" (result),
+		  "=b" (state), "=D" (edi),
+		  "=c" (dummy), "=d" (dummy), "=S" (dummy)
+		: "a" (command), "b" (function), "c" (0),
+		  "d" (smi_port), "S" (0), "D" (0)
 	);
 
 	dprintk("state is %x, result is %x\n", state, result);
 
-	return (state & 1);
+	return state & 1;
 }
 
 
@@ -165,11 +180,11 @@ static int speedstep_get_state (void)
  * @state: new processor frequency state (SPEEDSTEP_LOW or SPEEDSTEP_HIGH)
  *
  */
-static void speedstep_set_state (unsigned int state)
+static void speedstep_set_state(unsigned int state)
 {
 	unsigned int result = 0, command, new_state, dummy;
 	unsigned long flags;
-	unsigned int function=SET_SPEEDSTEP_STATE;
+	unsigned int function = SET_SPEEDSTEP_STATE;
 	unsigned int retry = 0;
 
 	if (state > 0x1)
@@ -180,11 +195,14 @@ static void speedstep_set_state (unsigned int state)
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 
-	dprintk("trying to set frequency to state %u with command %x at port %x\n", state, command, smi_port);
+	dprintk("trying to set frequency to state %u "
+		"with command %x at port %x\n",
+		state, command, smi_port);
 
 	do {
 		if (retry) {
-			dprintk("retry %u, previous result %u, waiting...\n", retry, result);
+			dprintk("retry %u, previous result %u, waiting...\n",
+					retry, result);
 			mdelay(retry * 50);
 		}
 		retry++;
@@ -192,20 +210,26 @@ static void speedstep_set_state (unsigned int state)
 			"push %%ebp\n"
 			"out %%al, (%%dx)\n"
 			"pop %%ebp"
-			: "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy),
-				"=d" (dummy), "=S" (dummy)
-			: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
+			: "=b" (new_state), "=D" (result),
+			  "=c" (dummy), "=a" (dummy),
+			  "=d" (dummy), "=S" (dummy)
+			: "a" (command), "b" (function), "c" (state),
+			  "d" (smi_port), "S" (0), "D" (0)
 			);
 	} while ((new_state != state) && (retry <= SMI_TRIES));
 
 	/* enable IRQs */
 	local_irq_restore(flags);
 
-	if (new_state == state) {
-		dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
-	} else {
-		printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result);
-	}
+	if (new_state == state)
+		dprintk("change to %u MHz succeeded after %u tries "
+			"with result %u\n",
+			(speedstep_freqs[new_state].frequency / 1000),
+			retry, result);
+	else
+		printk(KERN_ERR "cpufreq: change to state %u "
+			"failed with new_state %u and result %u\n",
+			state, new_state, result);
 
 	return;
 }
@@ -219,13 +243,14 @@ static void speedstep_set_state (unsigned int state)
  *
  * Sets a new CPUFreq policy/freq.
  */
-static int speedstep_target (struct cpufreq_policy *policy,
+static int speedstep_target(struct cpufreq_policy *policy,
 			unsigned int target_freq, unsigned int relation)
 {
 	unsigned int newstate = 0;
 	struct cpufreq_freqs freqs;
 
-	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
+	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0],
+				target_freq, relation, &newstate))
 		return -EINVAL;
 
 	freqs.old = speedstep_freqs[speedstep_get_state()].frequency;
@@ -250,7 +275,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
  * Limit must be within speedstep_low_freq and speedstep_high_freq, with
  * at least one border included.
  */
-static int speedstep_verify (struct cpufreq_policy *policy)
+static int speedstep_verify(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, &speedstep_freqs[0]);
 }
@@ -259,7 +284,8 @@ static int speedstep_verify (struct cpufreq_policy *policy)
 static int speedstep_cpu_init(struct cpufreq_policy *policy)
 {
 	int result;
-	unsigned int speed,state;
+	unsigned int speed, state;
+	unsigned int *low, *high;
 
 	/* capability check */
 	if (policy->cpu != 0)
@@ -272,19 +298,23 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	/* detect low and high frequency */
-	result = speedstep_smi_get_freqs(&speedstep_freqs[SPEEDSTEP_LOW].frequency,
-				&speedstep_freqs[SPEEDSTEP_HIGH].frequency);
+	low = &speedstep_freqs[SPEEDSTEP_LOW].frequency;
+	high = &speedstep_freqs[SPEEDSTEP_HIGH].frequency;
+
+	result = speedstep_smi_get_freqs(low, high);
 	if (result) {
-		/* fall back to speedstep_lib.c dection mechanism: try both states out */
-		dprintk("could not detect low and high frequencies by SMI call.\n");
+		/* fall back to speedstep_lib.c dection mechanism:
+		 * try both states out */
+		dprintk("could not detect low and high frequencies "
+				"by SMI call.\n");
 		result = speedstep_get_freqs(speedstep_processor,
-				&speedstep_freqs[SPEEDSTEP_LOW].frequency,
-				&speedstep_freqs[SPEEDSTEP_HIGH].frequency,
+				low, high,
 				NULL,
 				&speedstep_set_state);
 
 		if (result) {
-			dprintk("could not detect two different speeds -- aborting.\n");
+			dprintk("could not detect two different speeds"
+					" -- aborting.\n");
 			return result;
 		} else
 			dprintk("workaround worked.\n");
@@ -295,7 +325,8 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 	speed = speedstep_freqs[state].frequency;
 
 	dprintk("currently at %s speed setting - %i MHz\n",
-		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency) ? "low" : "high",
+		(speed == speedstep_freqs[SPEEDSTEP_LOW].frequency)
+		? "low" : "high",
 		(speed / 1000));
 
 	/* cpuinfo and default policy values */
@@ -304,7 +335,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 
 	result = cpufreq_frequency_table_cpuinfo(policy, speedstep_freqs);
 	if (result)
-		return (result);
+		return result;
 
 	cpufreq_frequency_table_get_attr(speedstep_freqs, policy->cpu);
 
@@ -321,7 +352,7 @@ static unsigned int speedstep_get(unsigned int cpu)
 {
 	if (cpu)
 		return -ENODEV;
-	return speedstep_get_processor_frequency(speedstep_processor);
+	return speedstep_get_frequency(speedstep_processor);
 }
 
 
@@ -335,7 +366,7 @@ static int speedstep_resume(struct cpufreq_policy *policy)
 	return result;
 }
 
-static struct freq_attr* speedstep_attr[] = {
+static struct freq_attr *speedstep_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
@@ -364,21 +395,23 @@ static int __init speedstep_init(void)
 	speedstep_processor = speedstep_detect_processor();
 
 	switch (speedstep_processor) {
-	case SPEEDSTEP_PROCESSOR_PIII_T:
-	case SPEEDSTEP_PROCESSOR_PIII_C:
-	case SPEEDSTEP_PROCESSOR_PIII_C_EARLY:
+	case SPEEDSTEP_CPU_PIII_T:
+	case SPEEDSTEP_CPU_PIII_C:
+	case SPEEDSTEP_CPU_PIII_C_EARLY:
 		break;
 	default:
 		speedstep_processor = 0;
 	}
 
 	if (!speedstep_processor) {
-		dprintk ("No supported Intel CPU detected.\n");
+		dprintk("No supported Intel CPU detected.\n");
 		return -ENODEV;
 	}
 
-	dprintk("signature:0x%.8lx, command:0x%.8lx, event:0x%.8lx, perf_level:0x%.8lx.\n",
-		ist_info.signature, ist_info.command, ist_info.event, ist_info.perf_level);
+	dprintk("signature:0x%.8lx, command:0x%.8lx, "
+		"event:0x%.8lx, perf_level:0x%.8lx.\n",
+		ist_info.signature, ist_info.command,
+		ist_info.event, ist_info.perf_level);
 
 	/* Error if no IST-SMI BIOS or no PARM
 		 sig= 'ISGE' aka 'Intel Speedstep Gate E' */
@@ -416,17 +449,20 @@ static void __exit speedstep_exit(void)
 	cpufreq_unregister_driver(&speedstep_driver);
 }
 
-module_param(smi_port,  int, 0444);
-module_param(smi_cmd,   int, 0444);
-module_param(smi_sig,  uint, 0444);
+module_param(smi_port, int, 0444);
+module_param(smi_cmd,  int, 0444);
+module_param(smi_sig, uint, 0444);
 
-MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value -- Intel's default setting is 0xb2");
-MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value -- Intel's default setting is 0x82");
-MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the SMI interface.");
+MODULE_PARM_DESC(smi_port, "Override the BIOS-given IST port with this value "
+		"-- Intel's default setting is 0xb2");
+MODULE_PARM_DESC(smi_cmd, "Override the BIOS-given IST command with this value "
+		"-- Intel's default setting is 0x82");
+MODULE_PARM_DESC(smi_sig, "Set to 1 to fake the IST signature when using the "
+		"SMI interface.");
 
-MODULE_AUTHOR ("Hiroshi Miura");
-MODULE_DESCRIPTION ("Speedstep driver for IST applet SMI interface.");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Hiroshi Miura");
+MODULE_DESCRIPTION("Speedstep driver for IST applet SMI interface.");
+MODULE_LICENSE("GPL");
 
 module_init(speedstep_init);
 module_exit(speedstep_exit);