[CPUFREQ] Move x86 drivers to drivers/cpufreq/

Signed-off-by: Dave Jones <davej@redhat.com>

1 files changed, 0 insertions, 633 deletions

diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
deleted file mode 100644
index 6ea3455..0000000
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ /dev/null
@@ -1,633 +0,0 @@
-/*
- * cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium
- * M (part of the Centrino chipset).
- *
- * Since the original Pentium M, most new Intel CPUs support Enhanced
- * SpeedStep.
- *
- * Despite the "SpeedStep" in the name, this is almost entirely unlike
- * traditional SpeedStep.
- *
- * Modelled on speedstep.c
- *
- * Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/sched.h>	/* current */
-#include <linux/delay.h>
-#include <linux/compiler.h>
-#include <linux/gfp.h>
-
-#include <asm/msr.h>
-#include <asm/processor.h>
-#include <asm/cpufeature.h>
-
-#define PFX		"speedstep-centrino: "
-#define MAINTAINER	"cpufreq@vger.kernel.org"
-
-#define INTEL_MSR_RANGE	(0xffff)
-
-struct cpu_id
-{
-	__u8	x86;            /* CPU family */
-	__u8	x86_model;	/* model */
-	__u8	x86_mask;	/* stepping */
-};
-
-enum {
-	CPU_BANIAS,
-	CPU_DOTHAN_A1,
-	CPU_DOTHAN_A2,
-	CPU_DOTHAN_B0,
-	CPU_MP4HT_D0,
-	CPU_MP4HT_E0,
-};
-
-static const struct cpu_id cpu_ids[] = {
-	[CPU_BANIAS]	= { 6,  9, 5 },
-	[CPU_DOTHAN_A1]	= { 6, 13, 1 },
-	[CPU_DOTHAN_A2]	= { 6, 13, 2 },
-	[CPU_DOTHAN_B0]	= { 6, 13, 6 },
-	[CPU_MP4HT_D0]	= {15,  3, 4 },
-	[CPU_MP4HT_E0]	= {15,  4, 1 },
-};
-#define N_IDS	ARRAY_SIZE(cpu_ids)
-
-struct cpu_model
-{
-	const struct cpu_id *cpu_id;
-	const char	*model_name;
-	unsigned	max_freq; /* max clock in kHz */
-
-	struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
-};
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
-				  const struct cpu_id *x);
-
-/* Operating points for current CPU */
-static DEFINE_PER_CPU(struct cpu_model *, centrino_model);
-static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu);
-
-static struct cpufreq_driver centrino_driver;
-
-#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE
-
-/* Computes the correct form for IA32_PERF_CTL MSR for a particular
-   frequency/voltage operating point; frequency in MHz, volts in mV.
-   This is stored as "index" in the structure. */
-#define OP(mhz, mv)							\
-	{								\
-		.frequency = (mhz) * 1000,				\
-		.index = (((mhz)/100) << 8) | ((mv - 700) / 16)		\
-	}
-
-/*
- * These voltage tables were derived from the Intel Pentium M
- * datasheet, document 25261202.pdf, Table 5.  I have verified they
- * are consistent with my IBM ThinkPad X31, which has a 1.3GHz Pentium
- * M.
- */
-
-/* Ultra Low Voltage Intel Pentium M processor 900MHz (Banias) */
-static struct cpufreq_frequency_table banias_900[] =
-{
-	OP(600,  844),
-	OP(800,  988),
-	OP(900, 1004),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Ultra Low Voltage Intel Pentium M processor 1000MHz (Banias) */
-static struct cpufreq_frequency_table banias_1000[] =
-{
-	OP(600,   844),
-	OP(800,   972),
-	OP(900,   988),
-	OP(1000, 1004),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Low Voltage Intel Pentium M processor 1.10GHz (Banias) */
-static struct cpufreq_frequency_table banias_1100[] =
-{
-	OP( 600,  956),
-	OP( 800, 1020),
-	OP( 900, 1100),
-	OP(1000, 1164),
-	OP(1100, 1180),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-
-/* Low Voltage Intel Pentium M processor 1.20GHz (Banias) */
-static struct cpufreq_frequency_table banias_1200[] =
-{
-	OP( 600,  956),
-	OP( 800, 1004),
-	OP( 900, 1020),
-	OP(1000, 1100),
-	OP(1100, 1164),
-	OP(1200, 1180),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Intel Pentium M processor 1.30GHz (Banias) */
-static struct cpufreq_frequency_table banias_1300[] =
-{
-	OP( 600,  956),
-	OP( 800, 1260),
-	OP(1000, 1292),
-	OP(1200, 1356),
-	OP(1300, 1388),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Intel Pentium M processor 1.40GHz (Banias) */
-static struct cpufreq_frequency_table banias_1400[] =
-{
-	OP( 600,  956),
-	OP( 800, 1180),
-	OP(1000, 1308),
-	OP(1200, 1436),
-	OP(1400, 1484),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Intel Pentium M processor 1.50GHz (Banias) */
-static struct cpufreq_frequency_table banias_1500[] =
-{
-	OP( 600,  956),
-	OP( 800, 1116),
-	OP(1000, 1228),
-	OP(1200, 1356),
-	OP(1400, 1452),
-	OP(1500, 1484),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Intel Pentium M processor 1.60GHz (Banias) */
-static struct cpufreq_frequency_table banias_1600[] =
-{
-	OP( 600,  956),
-	OP( 800, 1036),
-	OP(1000, 1164),
-	OP(1200, 1276),
-	OP(1400, 1420),
-	OP(1600, 1484),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-
-/* Intel Pentium M processor 1.70GHz (Banias) */
-static struct cpufreq_frequency_table banias_1700[] =
-{
-	OP( 600,  956),
-	OP( 800, 1004),
-	OP(1000, 1116),
-	OP(1200, 1228),
-	OP(1400, 1308),
-	OP(1700, 1484),
-	{ .frequency = CPUFREQ_TABLE_END }
-};
-#undef OP
-
-#define _BANIAS(cpuid, max, name)	\
-{	.cpu_id		= cpuid,	\
-	.model_name	= "Intel(R) Pentium(R) M processor " name "MHz", \
-	.max_freq	= (max)*1000,	\
-	.op_points	= banias_##max,	\
-}
-#define BANIAS(max)	_BANIAS(&cpu_ids[CPU_BANIAS], max, #max)
-
-/* CPU models, their operating frequency range, and freq/voltage
-   operating points */
-static struct cpu_model models[] =
-{
-	_BANIAS(&cpu_ids[CPU_BANIAS], 900, " 900"),
-	BANIAS(1000),
-	BANIAS(1100),
-	BANIAS(1200),
-	BANIAS(1300),
-	BANIAS(1400),
-	BANIAS(1500),
-	BANIAS(1600),
-	BANIAS(1700),
-
-	/* NULL model_name is a wildcard */
-	{ &cpu_ids[CPU_DOTHAN_A1], NULL, 0, NULL },
-	{ &cpu_ids[CPU_DOTHAN_A2], NULL, 0, NULL },
-	{ &cpu_ids[CPU_DOTHAN_B0], NULL, 0, NULL },
-	{ &cpu_ids[CPU_MP4HT_D0], NULL, 0, NULL },
-	{ &cpu_ids[CPU_MP4HT_E0], NULL, 0, NULL },
-
-	{ NULL, }
-};
-#undef _BANIAS
-#undef BANIAS
-
-static int centrino_cpu_init_table(struct cpufreq_policy *policy)
-{
-	struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
-	struct cpu_model *model;
-
-	for(model = models; model->cpu_id != NULL; model++)
-		if (centrino_verify_cpu_id(cpu, model->cpu_id) &&
-		    (model->model_name == NULL ||
-		     strcmp(cpu->x86_model_id, model->model_name) == 0))
-			break;
-
-	if (model->cpu_id == NULL) {
-		/* No match at all */
-		pr_debug("no support for CPU model \"%s\": "
-		       "send /proc/cpuinfo to " MAINTAINER "\n",
-		       cpu->x86_model_id);
-		return -ENOENT;
-	}
-
-	if (model->op_points == NULL) {
-		/* Matched a non-match */
-		pr_debug("no table support for CPU model \"%s\"\n",
-		       cpu->x86_model_id);
-		pr_debug("try using the acpi-cpufreq driver\n");
-		return -ENOENT;
-	}
-
-	per_cpu(centrino_model, policy->cpu) = model;
-
-	pr_debug("found \"%s\": max frequency: %dkHz\n",
-	       model->model_name, model->max_freq);
-
-	return 0;
-}
-
-#else
-static inline int centrino_cpu_init_table(struct cpufreq_policy *policy)
-{
-	return -ENODEV;
-}
-#endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
-
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
-				  const struct cpu_id *x)
-{
-	if ((c->x86 == x->x86) &&
-	    (c->x86_model == x->x86_model) &&
-	    (c->x86_mask == x->x86_mask))
-		return 1;
-	return 0;
-}
-
-/* To be called only after centrino_model is initialized */
-static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
-{
-	int i;
-
-	/*
-	 * Extract clock in kHz from PERF_CTL value
-	 * for centrino, as some DSDTs are buggy.
-	 * Ideally, this can be done using the acpi_data structure.
-	 */
-	if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) ||
-	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) ||
-	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) {
-		msr = (msr >> 8) & 0xff;
-		return msr * 100000;
-	}
-
-	if ((!per_cpu(centrino_model, cpu)) ||
-	    (!per_cpu(centrino_model, cpu)->op_points))
-		return 0;
-
-	msr &= 0xffff;
-	for (i = 0;
-		per_cpu(centrino_model, cpu)->op_points[i].frequency
-							!= CPUFREQ_TABLE_END;
-	     i++) {
-		if (msr == per_cpu(centrino_model, cpu)->op_points[i].index)
-			return per_cpu(centrino_model, cpu)->
-							op_points[i].frequency;
-	}
-	if (failsafe)
-		return per_cpu(centrino_model, cpu)->op_points[i-1].frequency;
-	else
-		return 0;
-}
-
-/* Return the current CPU frequency in kHz */
-static unsigned int get_cur_freq(unsigned int cpu)
-{
-	unsigned l, h;
-	unsigned clock_freq;
-
-	rdmsr_on_cpu(cpu, MSR_IA32_PERF_STATUS, &l, &h);
-	clock_freq = extract_clock(l, cpu, 0);
-
-	if (unlikely(clock_freq == 0)) {
-		/*
-		 * On some CPUs, we can see transient MSR values (which are
-		 * not present in _PSS), while CPU is doing some automatic
-		 * P-state transition (like TM2). Get the last freq set 
-		 * in PERF_CTL.
-		 */
-		rdmsr_on_cpu(cpu, MSR_IA32_PERF_CTL, &l, &h);
-		clock_freq = extract_clock(l, cpu, 1);
-	}
-	return clock_freq;
-}
-
-
-static int centrino_cpu_init(struct cpufreq_policy *policy)
-{
-	struct cpuinfo_x86 *cpu = &cpu_data(policy->cpu);
-	unsigned freq;
-	unsigned l, h;
-	int ret;
-	int i;
-
-	/* Only Intel makes Enhanced Speedstep-capable CPUs */
-	if (cpu->x86_vendor != X86_VENDOR_INTEL ||
-	    !cpu_has(cpu, X86_FEATURE_EST))
-		return -ENODEV;
-
-	if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
-		centrino_driver.flags |= CPUFREQ_CONST_LOOPS;
-
-	if (policy->cpu != 0)
-		return -ENODEV;
-
-	for (i = 0; i < N_IDS; i++)
-		if (centrino_verify_cpu_id(cpu, &cpu_ids[i]))
-			break;
-
-	if (i != N_IDS)
-		per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
-
-	if (!per_cpu(centrino_cpu, policy->cpu)) {
-		pr_debug("found unsupported CPU with "
-		"Enhanced SpeedStep: send /proc/cpuinfo to "
-		MAINTAINER "\n");
-		return -ENODEV;
-	}
-
-	if (centrino_cpu_init_table(policy)) {
-		return -ENODEV;
-	}
-
-	/* Check to see if Enhanced SpeedStep is enabled, and try to
-	   enable it if not. */
-	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-
-	if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
-		l |= MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP;
-		pr_debug("trying to enable Enhanced SpeedStep (%x)\n", l);
-		wrmsr(MSR_IA32_MISC_ENABLE, l, h);
-
-		/* check to see if it stuck */
-		rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-		if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
-			printk(KERN_INFO PFX
-				"couldn't enable Enhanced SpeedStep\n");
-			return -ENODEV;
-		}
-	}
-
-	freq = get_cur_freq(policy->cpu);
-	policy->cpuinfo.transition_latency = 10000;
-						/* 10uS transition latency */
-	policy->cur = freq;
-
-	pr_debug("centrino_cpu_init: cur=%dkHz\n", policy->cur);
-
-	ret = cpufreq_frequency_table_cpuinfo(policy,
-		per_cpu(centrino_model, policy->cpu)->op_points);
-	if (ret)
-		return (ret);
-
-	cpufreq_frequency_table_get_attr(
-		per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu);
-
-	return 0;
-}
-
-static int centrino_cpu_exit(struct cpufreq_policy *policy)
-{
-	unsigned int cpu = policy->cpu;
-
-	if (!per_cpu(centrino_model, cpu))
-		return -ENODEV;
-
-	cpufreq_frequency_table_put_attr(cpu);
-
-	per_cpu(centrino_model, cpu) = NULL;
-
-	return 0;
-}
-
-/**
- * centrino_verify - verifies a new CPUFreq policy
- * @policy: new policy
- *
- * Limit must be within this model's frequency range at least one
- * border included.
- */
-static int centrino_verify (struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy,
-			per_cpu(centrino_model, policy->cpu)->op_points);
-}
-
-/**
- * centrino_setpolicy - set a new CPUFreq policy
- * @policy: new policy
- * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency
- *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
- *
- * Sets a new CPUFreq policy.
- */
-static int centrino_target (struct cpufreq_policy *policy,
-			    unsigned int target_freq,
-			    unsigned int relation)
-{
-	unsigned int    newstate = 0;
-	unsigned int	msr, oldmsr = 0, h = 0, cpu = policy->cpu;
-	struct cpufreq_freqs	freqs;
-	int			retval = 0;
-	unsigned int		j, k, first_cpu, tmp;
-	cpumask_var_t covered_cpus;
-
-	if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL)))
-		return -ENOMEM;
-
-	if (unlikely(per_cpu(centrino_model, cpu) == NULL)) {
-		retval = -ENODEV;
-		goto out;
-	}
-
-	if (unlikely(cpufreq_frequency_table_target(policy,
-			per_cpu(centrino_model, cpu)->op_points,
-			target_freq,
-			relation,
-			&newstate))) {
-		retval = -EINVAL;
-		goto out;
-	}
-
-	first_cpu = 1;
-	for_each_cpu(j, policy->cpus) {
-		int good_cpu;
-
-		/* cpufreq holds the hotplug lock, so we are safe here */
-		if (!cpu_online(j))
-			continue;
-
-		/*
-		 * Support for SMP systems.
-		 * Make sure we are running on CPU that wants to change freq
-		 */
-		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
-			good_cpu = cpumask_any_and(policy->cpus,
-						   cpu_online_mask);
-		else
-			good_cpu = j;
-
-		if (good_cpu >= nr_cpu_ids) {
-			pr_debug("couldn't limit to CPUs in this domain\n");
-			retval = -EAGAIN;
-			if (first_cpu) {
-				/* We haven't started the transition yet. */
-				goto out;
-			}
-			break;
-		}
-
-		msr = per_cpu(centrino_model, cpu)->op_points[newstate].index;
-
-		if (first_cpu) {
-			rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h);
-			if (msr == (oldmsr & 0xffff)) {
-				pr_debug("no change needed - msr was and needs "
-					"to be %x\n", oldmsr);
-				retval = 0;
-				goto out;
-			}
-
-			freqs.old = extract_clock(oldmsr, cpu, 0);
-			freqs.new = extract_clock(msr, cpu, 0);
-
-			pr_debug("target=%dkHz old=%d new=%d msr=%04x\n",
-				target_freq, freqs.old, freqs.new, msr);
-
-			for_each_cpu(k, policy->cpus) {
-				if (!cpu_online(k))
-					continue;
-				freqs.cpu = k;
-				cpufreq_notify_transition(&freqs,
-					CPUFREQ_PRECHANGE);
-			}
-
-			first_cpu = 0;
-			/* all but 16 LSB are reserved, treat them with care */
-			oldmsr &= ~0xffff;
-			msr &= 0xffff;
-			oldmsr |= msr;
-		}
-
-		wrmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, oldmsr, h);
-		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
-			break;
-
-		cpumask_set_cpu(j, covered_cpus);
-	}
-
-	for_each_cpu(k, policy->cpus) {
-		if (!cpu_online(k))
-			continue;
-		freqs.cpu = k;
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	}
-
-	if (unlikely(retval)) {
-		/*
-		 * We have failed halfway through the frequency change.
-		 * We have sent callbacks to policy->cpus and
-		 * MSRs have already been written on coverd_cpus.
-		 * Best effort undo..
-		 */
-
-		for_each_cpu(j, covered_cpus)
-			wrmsr_on_cpu(j, MSR_IA32_PERF_CTL, oldmsr, h);
-
-		tmp = freqs.new;
-		freqs.new = freqs.old;
-		freqs.old = tmp;
-		for_each_cpu(j, policy->cpus) {
-			if (!cpu_online(j))
-				continue;
-			cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-			cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-		}
-	}
-	retval = 0;
-
-out:
-	free_cpumask_var(covered_cpus);
-	return retval;
-}
-
-static struct freq_attr* centrino_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static struct cpufreq_driver centrino_driver = {
-	.name		= "centrino", /* should be speedstep-centrino,
-					 but there's a 16 char limit */
-	.init		= centrino_cpu_init,
-	.exit		= centrino_cpu_exit,
-	.verify		= centrino_verify,
-	.target		= centrino_target,
-	.get		= get_cur_freq,
-	.attr           = centrino_attr,
-	.owner		= THIS_MODULE,
-};
-
-
-/**
- * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
- *
- * Initializes the Enhanced SpeedStep support. Returns -ENODEV on
- * unsupported devices, -ENOENT if there's no voltage table for this
- * particular CPU model, -EINVAL on problems during initiatization,
- * and zero on success.
- *
- * This is quite picky.  Not only does the CPU have to advertise the
- * "est" flag in the cpuid capability flags, we look for a specific
- * CPU model and stepping, and we need to have the exact model name in
- * our voltage tables.  That is, be paranoid about not releasing
- * someone's valuable magic smoke.
- */
-static int __init centrino_init(void)
-{
-	struct cpuinfo_x86 *cpu = &cpu_data(0);
-
-	if (!cpu_has(cpu, X86_FEATURE_EST))
-		return -ENODEV;
-
-	return cpufreq_register_driver(&centrino_driver);
-}
-
-static void __exit centrino_exit(void)
-{
-	cpufreq_unregister_driver(&centrino_driver);
-}
-
-MODULE_AUTHOR ("Jeremy Fitzhardinge <jeremy@goop.org>");
-MODULE_DESCRIPTION ("Enhanced SpeedStep driver for Intel Pentium M processors.");
-MODULE_LICENSE ("GPL");
-
-late_initcall(centrino_init);
-module_exit(centrino_exit);