Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 core updates from Ingo Molnar:
 "There were so many changes in the x86/asm, x86/apic and x86/mm topics
  in this cycle that the topical separation of -tip broke down somewhat -
  so the result is a more traditional architecture pull request,
  collected into the 'x86/core' topic.

  The topics were still maintained separately as far as possible, so
  bisectability and conceptual separation should still be pretty good -
  but there were a handful of merge points to avoid excessive
  dependencies (and conflicts) that would have been poorly tested in the
  end.

  The next cycle will hopefully be much more quiet (or at least will
  have fewer dependencies).

  The main changes in this cycle were:

   * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
     Gleixner)

     - This is the second and most intrusive part of changes to the x86
       interrupt handling - full conversion to hierarchical interrupt
       domains:

          [IOAPIC domain]   -----
                                 |
          [MSI domain]      --------[Remapping domain] ----- [ Vector domain ]
                                 |   (optional)          |
          [HPET MSI domain] -----                        |
                                                         |
          [DMAR domain]     -----------------------------
                                                         |
          [Legacy domain]   -----------------------------

       This now reflects the actual hardware and allowed us to distangle
       the domain specific code from the underlying parent domain, which
       can be optional in the case of interrupt remapping.  It's a clear
       separation of functionality and removes quite some duct tape
       constructs which plugged the remap code between ioapic/msi/hpet
       and the vector management.

     - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
       injection into guests (Feng Wu)

   * x86/asm changes:

     - Tons of cleanups and small speedups, micro-optimizations.  This
       is in preparation to move a good chunk of the low level entry
       code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
       Brian Gerst)

     - Moved all system entry related code to a new home under
       arch/x86/entry/ (Ingo Molnar)

     - Removal of the fragile and ugly CFI dwarf debuginfo annotations.
       Conversion to C will reintroduce many of them - but meanwhile
       they are only getting in the way, and the upstream kernel does
       not rely on them (Ingo Molnar)

     - NOP handling refinements. (Borislav Petkov)

   * x86/mm changes:

     - Big PAT and MTRR rework: making the code more robust and
       preparing to phase out exposing direct MTRR interfaces to drivers -
       in favor of using PAT driven interfaces (Toshi Kani, Luis R
       Rodriguez, Borislav Petkov)

     - New ioremap_wt()/set_memory_wt() interfaces to support
       Write-Through cached memory mappings.  This is especially
       important for good performance on NVDIMM hardware (Toshi Kani)

   * x86/ras changes:

     - Add support for deferred errors on AMD (Aravind Gopalakrishnan)

       This is an important RAS feature which adds hardware support for
       poisoned data.  That means roughly that the hardware marks data
       which it has detected as corrupted but wasn't able to correct, as
       poisoned data and raises an APIC interrupt to signal that in the
       form of a deferred error.  It is the OS's responsibility then to
       take proper recovery action and thus prolonge system lifetime as
       far as possible.

     - Add support for Intel "Local MCE"s: upcoming CPUs will support
       CPU-local MCE interrupts, as opposed to the traditional system-
       wide broadcasted MCE interrupts (Ashok Raj)

     - Misc cleanups (Borislav Petkov)

   * x86/platform changes:

     - Intel Atom SoC updates

  ... and lots of other cleanups, fixlets and other changes - see the
  shortlog and the Git log for details"

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
  x86/hpet: Use proper hpet device number for MSI allocation
  x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
  x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
  x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
  x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  iommu, x86: Properly handle posted interrupts for IOMMU hotplug
  iommu, x86: Provide irq_remapping_cap() interface
  iommu, x86: Setup Posted-Interrupts capability for Intel iommu
  iommu, x86: Add cap_pi_support() to detect VT-d PI capability
  iommu, x86: Avoid migrating VT-d posted interrupts
  iommu, x86: Save the mode (posted or remapped) of an IRTE
  iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
  iommu: dmar: Provide helper to copy shared irte fields
  iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
  iommu: Add new member capability to struct irq_remap_ops
  x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
  x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
  x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
  ...

1 files changed, 597 insertions, 706 deletions

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index f4dc246..845dc0d 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -18,6 +18,16 @@
  *					and Rolf G. Tews
  *					for testing these extensively
  *	Paul Diefenbaugh	:	Added full ACPI support
+ *
+ * Historical information which is worth to be preserved:
+ *
+ * - SiS APIC rmw bug:
+ *
+ *	We used to have a workaround for a bug in SiS chips which
+ *	required to rewrite the index register for a read-modify-write
+ *	operation as the chip lost the index information which was
+ *	setup for the read already. We cache the data now, so that
+ *	workaround has been removed.
  */
 
 #include <linux/mm.h>
@@ -31,13 +41,13 @@
 #include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/syscore_ops.h>
-#include <linux/irqdomain.h>
 #include <linux/freezer.h>
 #include <linux/kthread.h>
 #include <linux/jiffies.h>	/* time_after() */
 #include <linux/slab.h>
 #include <linux/bootmem.h>
 
+#include <asm/irqdomain.h>
 #include <asm/idle.h>
 #include <asm/io.h>
 #include <asm/smp.h>
@@ -63,27 +73,31 @@
 #define	for_each_ioapic_pin(idx, pin)	\
 	for_each_ioapic((idx))		\
 		for_each_pin((idx), (pin))
-
 #define for_each_irq_pin(entry, head) \
 	list_for_each_entry(entry, &head, list)
 
-/*
- *      Is the SiS APIC rmw bug present ?
- *      -1 = don't know, 0 = no, 1 = yes
- */
-int sis_apic_bug = -1;
-
 static DEFINE_RAW_SPINLOCK(ioapic_lock);
 static DEFINE_MUTEX(ioapic_mutex);
 static unsigned int ioapic_dynirq_base;
 static int ioapic_initialized;
 
-struct mp_pin_info {
+struct irq_pin_list {
+	struct list_head list;
+	int apic, pin;
+};
+
+struct mp_chip_data {
+	struct list_head irq_2_pin;
+	struct IO_APIC_route_entry entry;
 	int trigger;
 	int polarity;
-	int node;
-	int set;
 	u32 count;
+	bool isa_irq;
+};
+
+struct mp_ioapic_gsi {
+	u32 gsi_base;
+	u32 gsi_end;
 };
 
 static struct ioapic {
@@ -101,7 +115,6 @@ static struct ioapic {
 	struct mp_ioapic_gsi  gsi_config;
 	struct ioapic_domain_cfg irqdomain_cfg;
 	struct irq_domain *irqdomain;
-	struct mp_pin_info *pin_info;
 	struct resource *iomem_res;
 } ioapics[MAX_IO_APICS];
 
@@ -117,7 +130,7 @@ unsigned int mpc_ioapic_addr(int ioapic_idx)
 	return ioapics[ioapic_idx].mp_config.apicaddr;
 }
 
-struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx)
+static inline struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx)
 {
 	return &ioapics[ioapic_idx].gsi_config;
 }
@@ -129,11 +142,16 @@ static inline int mp_ioapic_pin_count(int ioapic)
 	return gsi_cfg->gsi_end - gsi_cfg->gsi_base + 1;
 }
 
-u32 mp_pin_to_gsi(int ioapic, int pin)
+static inline u32 mp_pin_to_gsi(int ioapic, int pin)
 {
 	return mp_ioapic_gsi_routing(ioapic)->gsi_base + pin;
 }
 
+static inline bool mp_is_legacy_irq(int irq)
+{
+	return irq >= 0 && irq < nr_legacy_irqs();
+}
+
 /*
  * Initialize all legacy IRQs and all pins on the first IOAPIC
  * if we have legacy interrupt controller. Kernel boot option "pirq="
@@ -144,12 +162,7 @@ static inline int mp_init_irq_at_boot(int ioapic, int irq)
 	if (!nr_legacy_irqs())
 		return 0;
 
-	return ioapic == 0 || (irq >= 0 && irq < nr_legacy_irqs());
-}
-
-static inline struct mp_pin_info *mp_pin_info(int ioapic_idx, int pin)
-{
-	return ioapics[ioapic_idx].pin_info + pin;
+	return ioapic == 0 || mp_is_legacy_irq(irq);
 }
 
 static inline struct irq_domain *mp_ioapic_irqdomain(int ioapic)
@@ -216,16 +229,6 @@ void mp_save_irq(struct mpc_intsrc *m)
 		panic("Max # of irq sources exceeded!!\n");
 }
 
-struct irq_pin_list {
-	struct list_head list;
-	int apic, pin;
-};
-
-static struct irq_pin_list *alloc_irq_pin_list(int node)
-{
-	return kzalloc_node(sizeof(struct irq_pin_list), GFP_KERNEL, node);
-}
-
 static void alloc_ioapic_saved_registers(int idx)
 {
 	size_t size;
@@ -247,8 +250,7 @@ static void free_ioapic_saved_registers(int idx)
 
 int __init arch_early_ioapic_init(void)
 {
-	struct irq_cfg *cfg;
-	int i, node = cpu_to_node(0);
+	int i;
 
 	if (!nr_legacy_irqs())
 		io_apic_irqs = ~0UL;
@@ -256,16 +258,6 @@ int __init arch_early_ioapic_init(void)
 	for_each_ioapic(i)
 		alloc_ioapic_saved_registers(i);
 
-	/*
-	 * For legacy IRQ's, start with assigning irq0 to irq15 to
-	 * IRQ0_VECTOR to IRQ15_VECTOR for all cpu's.
-	 */
-	for (i = 0; i < nr_legacy_irqs(); i++) {
-		cfg = alloc_irq_and_cfg_at(i, node);
-		cfg->vector = IRQ0_VECTOR + i;
-		cpumask_setall(cfg->domain);
-	}
-
 	return 0;
 }
 
@@ -283,7 +275,7 @@ static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx)
 		+ (mpc_ioapic_addr(idx) & ~PAGE_MASK);
 }
 
-void io_apic_eoi(unsigned int apic, unsigned int vector)
+static inline void io_apic_eoi(unsigned int apic, unsigned int vector)
 {
 	struct io_apic __iomem *io_apic = io_apic_base(apic);
 	writel(vector, &io_apic->eoi);
@@ -296,7 +288,8 @@ unsigned int native_io_apic_read(unsigned int apic, unsigned int reg)
 	return readl(&io_apic->data);
 }
 
-void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+static void io_apic_write(unsigned int apic, unsigned int reg,
+			  unsigned int value)
 {
 	struct io_apic __iomem *io_apic = io_apic_base(apic);
 
@@ -304,21 +297,6 @@ void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int valu
 	writel(value, &io_apic->data);
 }
 
-/*
- * Re-write a value: to be used for read-modify-write
- * cycles where the read already set up the index register.
- *
- * Older SiS APIC requires we rewrite the index register
- */
-void native_io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	struct io_apic __iomem *io_apic = io_apic_base(apic);
-
-	if (sis_apic_bug)
-		writel(reg, &io_apic->index);
-	writel(value, &io_apic->data);
-}
-
 union entry_union {
 	struct { u32 w1, w2; };
 	struct IO_APIC_route_entry entry;
@@ -378,7 +356,7 @@ static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
 static void ioapic_mask_entry(int apic, int pin)
 {
 	unsigned long flags;
-	union entry_union eu = { .entry.mask = 1 };
+	union entry_union eu = { .entry.mask = IOAPIC_MASKED };
 
 	raw_spin_lock_irqsave(&ioapic_lock, flags);
 	io_apic_write(apic, 0x10 + 2*pin, eu.w1);
@@ -391,16 +369,17 @@ static void ioapic_mask_entry(int apic, int pin)
  * shared ISA-space IRQs, so we have to support them. We are super
  * fast in the common case, and fast for shared ISA-space IRQs.
  */
-static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+static int __add_pin_to_irq_node(struct mp_chip_data *data,
+				 int node, int apic, int pin)
 {
 	struct irq_pin_list *entry;
 
 	/* don't allow duplicates */
-	for_each_irq_pin(entry, cfg->irq_2_pin)
+	for_each_irq_pin(entry, data->irq_2_pin)
 		if (entry->apic == apic && entry->pin == pin)
 			return 0;
 
-	entry = alloc_irq_pin_list(node);
+	entry = kzalloc_node(sizeof(struct irq_pin_list), GFP_ATOMIC, node);
 	if (!entry) {
 		pr_err("can not alloc irq_pin_list (%d,%d,%d)\n",
 		       node, apic, pin);
@@ -408,16 +387,16 @@ static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pi
 	}
 	entry->apic = apic;
 	entry->pin = pin;
+	list_add_tail(&entry->list, &data->irq_2_pin);
 
-	list_add_tail(&entry->list, &cfg->irq_2_pin);
 	return 0;
 }
 
-static void __remove_pin_from_irq(struct irq_cfg *cfg, int apic, int pin)
+static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin)
 {
 	struct irq_pin_list *tmp, *entry;
 
-	list_for_each_entry_safe(entry, tmp, &cfg->irq_2_pin, list)
+	list_for_each_entry_safe(entry, tmp, &data->irq_2_pin, list)
 		if (entry->apic == apic && entry->pin == pin) {
 			list_del(&entry->list);
 			kfree(entry);
@@ -425,22 +404,23 @@ static void __remove_pin_from_irq(struct irq_cfg *cfg, int apic, int pin)
 		}
 }
 
-static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+static void add_pin_to_irq_node(struct mp_chip_data *data,
+				int node, int apic, int pin)
 {
-	if (__add_pin_to_irq_node(cfg, node, apic, pin))
+	if (__add_pin_to_irq_node(data, node, apic, pin))
 		panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
 }
 
 /*
  * Reroute an IRQ to a different pin.
  */
-static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
+static void __init replace_pin_at_irq_node(struct mp_chip_data *data, int node,
 					   int oldapic, int oldpin,
 					   int newapic, int newpin)
 {
 	struct irq_pin_list *entry;
 
-	for_each_irq_pin(entry, cfg->irq_2_pin) {
+	for_each_irq_pin(entry, data->irq_2_pin) {
 		if (entry->apic == oldapic && entry->pin == oldpin) {
 			entry->apic = newapic;
 			entry->pin = newpin;
@@ -450,32 +430,26 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
 	}
 
 	/* old apic/pin didn't exist, so just add new ones */
-	add_pin_to_irq_node(cfg, node, newapic, newpin);
-}
-
-static void __io_apic_modify_irq(struct irq_pin_list *entry,
-				 int mask_and, int mask_or,
-				 void (*final)(struct irq_pin_list *entry))
-{
-	unsigned int reg, pin;
-
-	pin = entry->pin;
-	reg = io_apic_read(entry->apic, 0x10 + pin * 2);
-	reg &= mask_and;
-	reg |= mask_or;
-	io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
-	if (final)
-		final(entry);
+	add_pin_to_irq_node(data, node, newapic, newpin);
 }
 
-static void io_apic_modify_irq(struct irq_cfg *cfg,
+static void io_apic_modify_irq(struct mp_chip_data *data,
 			       int mask_and, int mask_or,
 			       void (*final)(struct irq_pin_list *entry))
 {
+	union entry_union eu;
 	struct irq_pin_list *entry;
 
-	for_each_irq_pin(entry, cfg->irq_2_pin)
-		__io_apic_modify_irq(entry, mask_and, mask_or, final);
+	eu.entry = data->entry;
+	eu.w1 &= mask_and;
+	eu.w1 |= mask_or;
+	data->entry = eu.entry;
+
+	for_each_irq_pin(entry, data->irq_2_pin) {
+		io_apic_write(entry->apic, 0x10 + 2 * entry->pin, eu.w1);
+		if (final)
+			final(entry);
+	}
 }
 
 static void io_apic_sync(struct irq_pin_list *entry)
@@ -490,39 +464,31 @@ static void io_apic_sync(struct irq_pin_list *entry)
 	readl(&io_apic->data);
 }
 
-static void mask_ioapic(struct irq_cfg *cfg)
+static void mask_ioapic_irq(struct irq_data *irq_data)
 {
+	struct mp_chip_data *data = irq_data->chip_data;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
+	io_apic_modify_irq(data, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
-static void mask_ioapic_irq(struct irq_data *data)
+static void __unmask_ioapic(struct mp_chip_data *data)
 {
-	mask_ioapic(irqd_cfg(data));
+	io_apic_modify_irq(data, ~IO_APIC_REDIR_MASKED, 0, NULL);
 }
 
-static void __unmask_ioapic(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL);
-}
-
-static void unmask_ioapic(struct irq_cfg *cfg)
+static void unmask_ioapic_irq(struct irq_data *irq_data)
 {
+	struct mp_chip_data *data = irq_data->chip_data;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&ioapic_lock, flags);
-	__unmask_ioapic(cfg);
+	__unmask_ioapic(data);
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
-static void unmask_ioapic_irq(struct irq_data *data)
-{
-	unmask_ioapic(irqd_cfg(data));
-}
-
 /*
  * IO-APIC versions below 0x20 don't support EOI register.
  * For the record, here is the information about various versions:
@@ -539,7 +505,7 @@ static void unmask_ioapic_irq(struct irq_data *data)
  * Otherwise, we simulate the EOI message manually by changing the trigger
  * mode to edge and then back to level, with RTE being masked during this.
  */
-void native_eoi_ioapic_pin(int apic, int pin, int vector)
+static void __eoi_ioapic_pin(int apic, int pin, int vector)
 {
 	if (mpc_ioapic_ver(apic) >= 0x20) {
 		io_apic_eoi(apic, vector);
@@ -551,7 +517,7 @@ void native_eoi_ioapic_pin(int apic, int pin, int vector)
 		/*
 		 * Mask the entry and change the trigger mode to edge.
 		 */
-		entry1.mask = 1;
+		entry1.mask = IOAPIC_MASKED;
 		entry1.trigger = IOAPIC_EDGE;
 
 		__ioapic_write_entry(apic, pin, entry1);
@@ -563,15 +529,14 @@ void native_eoi_ioapic_pin(int apic, int pin, int vector)
 	}
 }
 
-void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+void eoi_ioapic_pin(int vector, struct mp_chip_data *data)
 {
-	struct irq_pin_list *entry;
 	unsigned long flags;
+	struct irq_pin_list *entry;
 
 	raw_spin_lock_irqsave(&ioapic_lock, flags);
-	for_each_irq_pin(entry, cfg->irq_2_pin)
-		x86_io_apic_ops.eoi_ioapic_pin(entry->apic, entry->pin,
-					       cfg->vector);
+	for_each_irq_pin(entry, data->irq_2_pin)
+		__eoi_ioapic_pin(entry->apic, entry->pin, vector);
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
@@ -588,8 +553,8 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 	 * Make sure the entry is masked and re-read the contents to check
 	 * if it is a level triggered pin and if the remote-IRR is set.
 	 */
-	if (!entry.mask) {
-		entry.mask = 1;
+	if (entry.mask == IOAPIC_UNMASKED) {
+		entry.mask = IOAPIC_MASKED;
 		ioapic_write_entry(apic, pin, entry);
 		entry = ioapic_read_entry(apic, pin);
 	}
@@ -602,13 +567,12 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 		 * doesn't clear the remote-IRR if the trigger mode is not
 		 * set to level.
 		 */
-		if (!entry.trigger) {
+		if (entry.trigger == IOAPIC_EDGE) {
 			entry.trigger = IOAPIC_LEVEL;
 			ioapic_write_entry(apic, pin, entry);
 		}
-
 		raw_spin_lock_irqsave(&ioapic_lock, flags);
-		x86_io_apic_ops.eoi_ioapic_pin(apic, pin, entry.vector);
+		__eoi_ioapic_pin(apic, pin, entry.vector);
 		raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 	}
 
@@ -706,8 +670,8 @@ void mask_ioapic_entries(void)
 			struct IO_APIC_route_entry entry;
 
 			entry = ioapics[apic].saved_registers[pin];
-			if (!entry.mask) {
-				entry.mask = 1;
+			if (entry.mask == IOAPIC_UNMASKED) {
+				entry.mask = IOAPIC_MASKED;
 				ioapic_write_entry(apic, pin, entry);
 			}
 		}
@@ -809,11 +773,11 @@ static int EISA_ELCR(unsigned int irq)
 
 #endif
 
-/* ISA interrupts are always polarity zero edge triggered,
+/* ISA interrupts are always active high edge triggered,
  * when listed as conforming in the MP table. */
 
-#define default_ISA_trigger(idx)	(0)
-#define default_ISA_polarity(idx)	(0)
+#define default_ISA_trigger(idx)	(IOAPIC_EDGE)
+#define default_ISA_polarity(idx)	(IOAPIC_POL_HIGH)
 
 /* EISA interrupts are always polarity zero and can be edge or level
  * trigger depending on the ELCR value.  If an interrupt is listed as
@@ -823,53 +787,55 @@ static int EISA_ELCR(unsigned int irq)
 #define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].srcbusirq))
 #define default_EISA_polarity(idx)	default_ISA_polarity(idx)
 
-/* PCI interrupts are always polarity one level triggered,
+/* PCI interrupts are always active low level triggered,
  * when listed as conforming in the MP table. */
 
-#define default_PCI_trigger(idx)	(1)
-#define default_PCI_polarity(idx)	(1)
+#define default_PCI_trigger(idx)	(IOAPIC_LEVEL)
+#define default_PCI_polarity(idx)	(IOAPIC_POL_LOW)
 
 static int irq_polarity(int idx)
 {
 	int bus = mp_irqs[idx].srcbus;
-	int polarity;
 
 	/*
 	 * Determine IRQ line polarity (high active or low active):
 	 */
-	switch (mp_irqs[idx].irqflag & 3)
-	{
-		case 0: /* conforms, ie. bus-type dependent polarity */
-			if (test_bit(bus, mp_bus_not_pci))
-				polarity = default_ISA_polarity(idx);
-			else
-				polarity = default_PCI_polarity(idx);
-			break;
-		case 1: /* high active */
-		{
-			polarity = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			pr_warn("broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
-		case 3: /* low active */
-		{
-			polarity = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			pr_warn("broken BIOS!!\n");
-			polarity = 1;
-			break;
-		}
+	switch (mp_irqs[idx].irqflag & 0x03) {
+	case 0:
+		/* conforms to spec, ie. bus-type dependent polarity */
+		if (test_bit(bus, mp_bus_not_pci))
+			return default_ISA_polarity(idx);
+		else
+			return default_PCI_polarity(idx);
+	case 1:
+		return IOAPIC_POL_HIGH;
+	case 2:
+		pr_warn("IOAPIC: Invalid polarity: 2, defaulting to low\n");
+	case 3:
+	default: /* Pointless default required due to do gcc stupidity */
+		return IOAPIC_POL_LOW;
+	}
+}
+
+#ifdef CONFIG_EISA
+static int eisa_irq_trigger(int idx, int bus, int trigger)
+{
+	switch (mp_bus_id_to_type[bus]) {
+	case MP_BUS_PCI:
+	case MP_BUS_ISA:
+		return trigger;
+	case MP_BUS_EISA:
+		return default_EISA_trigger(idx);
 	}
-	return polarity;
+	pr_warn("IOAPIC: Invalid srcbus: %d defaulting to level\n", bus);
+	return IOAPIC_LEVEL;
 }
+#else
+static inline int eisa_irq_trigger(int idx, int bus, int trigger)
+{
+	return trigger;
+}
+#endif
 
 static int irq_trigger(int idx)
 {
@@ -879,153 +845,227 @@ static int irq_trigger(int idx)
 	/*
 	 * Determine IRQ trigger mode (edge or level sensitive):
 	 */
-	switch ((mp_irqs[idx].irqflag>>2) & 3)
-	{
-		case 0: /* conforms, ie. bus-type dependent */
-			if (test_bit(bus, mp_bus_not_pci))
-				trigger = default_ISA_trigger(idx);
-			else
-				trigger = default_PCI_trigger(idx);
-#ifdef CONFIG_EISA
-			switch (mp_bus_id_to_type[bus]) {
-				case MP_BUS_ISA: /* ISA pin */
-				{
-					/* set before the switch */
-					break;
-				}
-				case MP_BUS_EISA: /* EISA pin */
-				{
-					trigger = default_EISA_trigger(idx);
-					break;
-				}
-				case MP_BUS_PCI: /* PCI pin */
-				{
-					/* set before the switch */
-					break;
-				}
-				default:
-				{
-					pr_warn("broken BIOS!!\n");
-					trigger = 1;
-					break;
-				}
-			}
+	switch ((mp_irqs[idx].irqflag >> 2) & 0x03) {
+	case 0:
+		/* conforms to spec, ie. bus-type dependent trigger mode */
+		if (test_bit(bus, mp_bus_not_pci))
+			trigger = default_ISA_trigger(idx);
+		else
+			trigger = default_PCI_trigger(idx);
+		/* Take EISA into account */
+		return eisa_irq_trigger(idx, bus, trigger);
+	case 1:
+		return IOAPIC_EDGE;
+	case 2:
+		pr_warn("IOAPIC: Invalid trigger mode 2 defaulting to level\n");
+	case 3:
+	default: /* Pointless default required due to do gcc stupidity */
+		return IOAPIC_LEVEL;
+	}
+}
+
+void ioapic_set_alloc_attr(struct irq_alloc_info *info, int node,
+			   int trigger, int polarity)
+{
+	init_irq_alloc_info(info, NULL);
+	info->type = X86_IRQ_ALLOC_TYPE_IOAPIC;
+	info->ioapic_node = node;
+	info->ioapic_trigger = trigger;
+	info->ioapic_polarity = polarity;
+	info->ioapic_valid = 1;
+}
+
+#ifndef CONFIG_ACPI
+int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity);
 #endif
-			break;
-		case 1: /* edge */
-		{
-			trigger = 0;
-			break;
-		}
-		case 2: /* reserved */
-		{
-			pr_warn("broken BIOS!!\n");
-			trigger = 1;
-			break;
-		}
-		case 3: /* level */
-		{
-			trigger = 1;
-			break;
-		}
-		default: /* invalid */
-		{
-			pr_warn("broken BIOS!!\n");
-			trigger = 0;
-			break;
+
+static void ioapic_copy_alloc_attr(struct irq_alloc_info *dst,
+				   struct irq_alloc_info *src,
+				   u32 gsi, int ioapic_idx, int pin)
+{
+	int trigger, polarity;
+
+	copy_irq_alloc_info(dst, src);
+	dst->type = X86_IRQ_ALLOC_TYPE_IOAPIC;
+	dst->ioapic_id = mpc_ioapic_id(ioapic_idx);
+	dst->ioapic_pin = pin;
+	dst->ioapic_valid = 1;
+	if (src && src->ioapic_valid) {
+		dst->ioapic_node = src->ioapic_node;
+		dst->ioapic_trigger = src->ioapic_trigger;
+		dst->ioapic_polarity = src->ioapic_polarity;
+	} else {
+		dst->ioapic_node = NUMA_NO_NODE;
+		if (acpi_get_override_irq(gsi, &trigger, &polarity) >= 0) {
+			dst->ioapic_trigger = trigger;
+			dst->ioapic_polarity = polarity;
+		} else {
+			/*
+			 * PCI interrupts are always active low level
+			 * triggered.
+			 */
+			dst->ioapic_trigger = IOAPIC_LEVEL;
+			dst->ioapic_polarity = IOAPIC_POL_LOW;
 		}
 	}
-	return trigger;
 }
 
-static int alloc_irq_from_domain(struct irq_domain *domain, u32 gsi, int pin)
+static int ioapic_alloc_attr_node(struct irq_alloc_info *info)
+{
+	return (info && info->ioapic_valid) ? info->ioapic_node : NUMA_NO_NODE;
+}
+
+static void mp_register_handler(unsigned int irq, unsigned long trigger)
+{
+	irq_flow_handler_t hdl;
+	bool fasteoi;
+
+	if (trigger) {
+		irq_set_status_flags(irq, IRQ_LEVEL);
+		fasteoi = true;
+	} else {
+		irq_clear_status_flags(irq, IRQ_LEVEL);
+		fasteoi = false;
+	}
+
+	hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq;
+	__irq_set_handler(irq, hdl, 0, fasteoi ? "fasteoi" : "edge");
+}
+
+static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info)
 {
+	struct mp_chip_data *data = irq_get_chip_data(irq);
+
+	/*
+	 * setup_IO_APIC_irqs() programs all legacy IRQs with default trigger
+	 * and polarity attirbutes. So allow the first user to reprogram the
+	 * pin with real trigger and polarity attributes.
+	 */
+	if (irq < nr_legacy_irqs() && data->count == 1) {
+		if (info->ioapic_trigger != data->trigger)
+			mp_register_handler(irq, data->trigger);
+		data->entry.trigger = data->trigger = info->ioapic_trigger;
+		data->entry.polarity = data->polarity = info->ioapic_polarity;
+	}
+
+	return data->trigger == info->ioapic_trigger &&
+	       data->polarity == info->ioapic_polarity;
+}
+
+static int alloc_irq_from_domain(struct irq_domain *domain, int ioapic, u32 gsi,
+				 struct irq_alloc_info *info)
+{
+	bool legacy = false;
 	int irq = -1;
-	int ioapic = (int)(long)domain->host_data;
 	int type = ioapics[ioapic].irqdomain_cfg.type;
 
 	switch (type) {
 	case IOAPIC_DOMAIN_LEGACY:
 		/*
-		 * Dynamically allocate IRQ number for non-ISA IRQs in the first 16
-		 * GSIs on some weird platforms.
+		 * Dynamically allocate IRQ number for non-ISA IRQs in the first
+		 * 16 GSIs on some weird platforms.
 		 */
-		if (gsi < nr_legacy_irqs())
-			irq = irq_create_mapping(domain, pin);
-		else if (irq_create_strict_mappings(domain, gsi, pin, 1) == 0)
+		if (!ioapic_initialized || gsi >= nr_legacy_irqs())
 			irq = gsi;
+		legacy = mp_is_legacy_irq(irq);
 		break;
 	case IOAPIC_DOMAIN_STRICT:
-		if (irq_create_strict_mappings(domain, gsi, pin, 1) == 0)
-			irq = gsi;
+		irq = gsi;
 		break;
 	case IOAPIC_DOMAIN_DYNAMIC:
-		irq = irq_create_mapping(domain, pin);
 		break;
 	default:
 		WARN(1, "ioapic: unknown irqdomain type %d\n", type);
-		break;
+		return -1;
+	}
+
+	return __irq_domain_alloc_irqs(domain, irq, 1,
+				       ioapic_alloc_attr_node(info),
+				       info, legacy);
+}
+
+/*
+ * Need special handling for ISA IRQs because there may be multiple IOAPIC pins
+ * sharing the same ISA IRQ number and irqdomain only supports 1:1 mapping
+ * between IOAPIC pin and IRQ number. A typical IOAPIC has 24 pins, pin 0-15 are
+ * used for legacy IRQs and pin 16-23 are used for PCI IRQs (PIRQ A-H).
+ * When ACPI is disabled, only legacy IRQ numbers (IRQ0-15) are available, and
+ * some BIOSes may use MP Interrupt Source records to override IRQ numbers for
+ * PIRQs instead of reprogramming the interrupt routing logic. Thus there may be
+ * multiple pins sharing the same legacy IRQ number when ACPI is disabled.
+ */
+static int alloc_isa_irq_from_domain(struct irq_domain *domain,
+				     int irq, int ioapic, int pin,
+				     struct irq_alloc_info *info)
+{
+	struct mp_chip_data *data;
+	struct irq_data *irq_data = irq_get_irq_data(irq);
+	int node = ioapic_alloc_attr_node(info);
+
+	/*
+	 * Legacy ISA IRQ has already been allocated, just add pin to
+	 * the pin list assoicated with this IRQ and program the IOAPIC
+	 * entry. The IOAPIC entry
+	 */
+	if (irq_data && irq_data->parent_data) {
+		if (!mp_check_pin_attr(irq, info))
+			return -EBUSY;
+		if (__add_pin_to_irq_node(irq_data->chip_data, node, ioapic,
+					  info->ioapic_pin))
+			return -ENOMEM;
+	} else {
+		irq = __irq_domain_alloc_irqs(domain, irq, 1, node, info, true);
+		if (irq >= 0) {
+			irq_data = irq_domain_get_irq_data(domain, irq);
+			data = irq_data->chip_data;
+			data->isa_irq = true;
+		}
 	}
 
-	return irq > 0 ? irq : -1;
+	return irq;
 }
 
 static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin,
-			     unsigned int flags)
+			     unsigned int flags, struct irq_alloc_info *info)
 {
 	int irq;
+	bool legacy = false;
+	struct irq_alloc_info tmp;
+	struct mp_chip_data *data;
 	struct irq_domain *domain = mp_ioapic_irqdomain(ioapic);
-	struct mp_pin_info *info = mp_pin_info(ioapic, pin);
 
 	if (!domain)
-		return -1;
+		return -ENOSYS;
 
-	mutex_lock(&ioapic_mutex);
-
-	/*
-	 * Don't use irqdomain to manage ISA IRQs because there may be
-	 * multiple IOAPIC pins sharing the same ISA IRQ number and
-	 * irqdomain only supports 1:1 mapping between IOAPIC pin and
-	 * IRQ number. A typical IOAPIC has 24 pins, pin 0-15 are used
-	 * for legacy IRQs and pin 16-23 are used for PCI IRQs (PIRQ A-H).
-	 * When ACPI is disabled, only legacy IRQ numbers (IRQ0-15) are
-	 * available, and some BIOSes may use MP Interrupt Source records
-	 * to override IRQ numbers for PIRQs instead of reprogramming
-	 * the interrupt routing logic. Thus there may be multiple pins
-	 * sharing the same legacy IRQ number when ACPI is disabled.
-	 */
 	if (idx >= 0 && test_bit(mp_irqs[idx].srcbus, mp_bus_not_pci)) {
 		irq = mp_irqs[idx].srcbusirq;
-		if (flags & IOAPIC_MAP_ALLOC) {
-			if (info->count == 0 &&
-			    mp_irqdomain_map(domain, irq, pin) != 0)
-				irq = -1;
+		legacy = mp_is_legacy_irq(irq);
+	}
 
-			/* special handling for timer IRQ0 */
+	mutex_lock(&ioapic_mutex);
+	if (!(flags & IOAPIC_MAP_ALLOC)) {
+		if (!legacy) {
+			irq = irq_find_mapping(domain, pin);
 			if (irq == 0)
-				info->count++;
+				irq = -ENOENT;
 		}
 	} else {
-		irq = irq_find_mapping(domain, pin);
-		if (irq <= 0 && (flags & IOAPIC_MAP_ALLOC))
-			irq = alloc_irq_from_domain(domain, gsi, pin);
-	}
-
-	if (flags & IOAPIC_MAP_ALLOC) {
-		/* special handling for legacy IRQs */
-		if (irq < nr_legacy_irqs() && info->count == 1 &&
-		    mp_irqdomain_map(domain, irq, pin) != 0)
-			irq = -1;
-
-		if (irq > 0)
-			info->count++;
-		else if (info->count == 0)
-			info->set = 0;
+		ioapic_copy_alloc_attr(&tmp, info, gsi, ioapic, pin);
+		if (legacy)
+			irq = alloc_isa_irq_from_domain(domain, irq,
+							ioapic, pin, &tmp);
+		else if ((irq = irq_find_mapping(domain, pin)) == 0)
+			irq = alloc_irq_from_domain(domain, ioapic, gsi, &tmp);
+		else if (!mp_check_pin_attr(irq, &tmp))
+			irq = -EBUSY;
+		if (irq >= 0) {
+			data = irq_get_chip_data(irq);
+			data->count++;
+		}
 	}
-
 	mutex_unlock(&ioapic_mutex);
 
-	return irq > 0 ? irq : -1;
+	return irq;
 }
 
 static int pin_2_irq(int idx, int ioapic, int pin, unsigned int flags)
@@ -1058,10 +1098,10 @@ static int pin_2_irq(int idx, int ioapic, int pin, unsigned int flags)
 	}
 #endif
 
-	return  mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags);
+	return  mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, NULL);
 }
 
-int mp_map_gsi_to_irq(u32 gsi, unsigned int flags)
+int mp_map_gsi_to_irq(u32 gsi, unsigned int flags, struct irq_alloc_info *info)
 {
 	int ioapic, pin, idx;
 
@@ -1074,31 +1114,24 @@ int mp_map_gsi_to_irq(u32 gsi, unsigned int flags)
 	if ((flags & IOAPIC_MAP_CHECK) && idx < 0)
 		return -1;
 
-	return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags);
+	return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, info);
 }
 
 void mp_unmap_irq(int irq)
 {
-	struct irq_data *data = irq_get_irq_data(irq);
-	struct mp_pin_info *info;
-	int ioapic, pin;
+	struct irq_data *irq_data = irq_get_irq_data(irq);
+	struct mp_chip_data *data;
 
-	if (!data || !data->domain)
+	if (!irq_data || !irq_data->domain)
 		return;
 
-	ioapic = (int)(long)data->domain->host_data;
-	pin = (int)data->hwirq;
-	info = mp_pin_info(ioapic, pin);
+	data = irq_data->chip_data;
+	if (!data || data->isa_irq)
+		return;
 
 	mutex_lock(&ioapic_mutex);
-	if (--info->count == 0) {
-		info->set = 0;
-		if (irq < nr_legacy_irqs() &&
-		    ioapics[ioapic].irqdomain_cfg.type == IOAPIC_DOMAIN_LEGACY)
-			mp_irqdomain_unmap(data->domain, irq);
-		else
-			irq_dispose_mapping(irq);
-	}
+	if (--data->count == 0)
+		irq_domain_free_irqs(irq, 1);
 	mutex_unlock(&ioapic_mutex);
 }
 
@@ -1165,7 +1198,7 @@ out:
 }
 EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
 
-static struct irq_chip ioapic_chip;
+static struct irq_chip ioapic_chip, ioapic_ir_chip;
 
 #ifdef CONFIG_X86_32
 static inline int IO_APIC_irq_trigger(int irq)
@@ -1189,96 +1222,6 @@ static inline int IO_APIC_irq_trigger(int irq)
 }
 #endif
 
-static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg,
-				 unsigned long trigger)
-{
-	struct irq_chip *chip = &ioapic_chip;
-	irq_flow_handler_t hdl;
-	bool fasteoi;
-
-	if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
-	    trigger == IOAPIC_LEVEL) {
-		irq_set_status_flags(irq, IRQ_LEVEL);
-		fasteoi = true;
-	} else {
-		irq_clear_status_flags(irq, IRQ_LEVEL);
-		fasteoi = false;
-	}
-
-	if (setup_remapped_irq(irq, cfg, chip))
-		fasteoi = trigger != 0;
-
-	hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq;
-	irq_set_chip_and_handler_name(irq, chip, hdl,
-				      fasteoi ? "fasteoi" : "edge");
-}
-
-int native_setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry,
-			      unsigned int destination, int vector,
-			      struct io_apic_irq_attr *attr)
-{
-	memset(entry, 0, sizeof(*entry));
-
-	entry->delivery_mode = apic->irq_delivery_mode;
-	entry->dest_mode     = apic->irq_dest_mode;
-	entry->dest	     = destination;
-	entry->vector	     = vector;
-	entry->mask	     = 0;			/* enable IRQ */
-	entry->trigger	     = attr->trigger;
-	entry->polarity	     = attr->polarity;
-
-	/*
-	 * Mask level triggered irqs.
-	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
-	 */
-	if (attr->trigger)
-		entry->mask = 1;
-
-	return 0;
-}
-
-static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg,
-				struct io_apic_irq_attr *attr)
-{
-	struct IO_APIC_route_entry entry;
-	unsigned int dest;
-
-	if (!IO_APIC_IRQ(irq))
-		return;
-
-	if (assign_irq_vector(irq, cfg, apic->target_cpus()))
-		return;
-
-	if (apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus(),
-					 &dest)) {
-		pr_warn("Failed to obtain apicid for ioapic %d, pin %d\n",
-			mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
-		clear_irq_vector(irq, cfg);
-
-		return;
-	}
-
-	apic_printk(APIC_VERBOSE,KERN_DEBUG
-		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> "
-		    "IRQ %d Mode:%i Active:%i Dest:%d)\n",
-		    attr->ioapic, mpc_ioapic_id(attr->ioapic), attr->ioapic_pin,
-		    cfg->vector, irq, attr->trigger, attr->polarity, dest);
-
-	if (x86_io_apic_ops.setup_entry(irq, &entry, dest, cfg->vector, attr)) {
-		pr_warn("Failed to setup ioapic entry for ioapic  %d, pin %d\n",
-			mpc_ioapic_id(attr->ioapic), attr->ioapic_pin);
-		clear_irq_vector(irq, cfg);
-
-		return;
-	}
-
-	ioapic_register_intr(irq, cfg, attr->trigger);
-	if (irq < nr_legacy_irqs())
-		legacy_pic->mask(irq);
-
-	ioapic_write_entry(attr->ioapic, attr->ioapic_pin, entry);
-}
-
 static void __init setup_IO_APIC_irqs(void)
 {
 	unsigned int ioapic, pin;
@@ -1298,106 +1241,41 @@ static void __init setup_IO_APIC_irqs(void)
 	}
 }
 
-/*
- * Set up the timer pin, possibly with the 8259A-master behind.
- */
-static void __init setup_timer_IRQ0_pin(unsigned int ioapic_idx,
-					unsigned int pin, int vector)
-{
-	struct IO_APIC_route_entry entry;
-	unsigned int dest;
-
-	memset(&entry, 0, sizeof(entry));
-
-	/*
-	 * We use logical delivery to get the timer IRQ
-	 * to the first CPU.
-	 */
-	if (unlikely(apic->cpu_mask_to_apicid_and(apic->target_cpus(),
-						  apic->target_cpus(), &dest)))
-		dest = BAD_APICID;
-
-	entry.dest_mode = apic->irq_dest_mode;
-	entry.mask = 0;			/* don't mask IRQ for edge */
-	entry.dest = dest;
-	entry.delivery_mode = apic->irq_delivery_mode;
-	entry.polarity = 0;
-	entry.trigger = 0;
-	entry.vector = vector;
-
-	/*
-	 * The timer IRQ doesn't have to know that behind the
-	 * scene we may have a 8259A-master in AEOI mode ...
-	 */
-	irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq,
-				      "edge");
-
-	/*
-	 * Add it to the IO-APIC irq-routing table:
-	 */
-	ioapic_write_entry(ioapic_idx, pin, entry);
-}
-
-void native_io_apic_print_entries(unsigned int apic, unsigned int nr_entries)
+void ioapic_zap_locks(void)
 {
-	int i;
-
-	pr_debug(" NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:\n");
-
-	for (i = 0; i <= nr_entries; i++) {
-		struct IO_APIC_route_entry entry;
-
-		entry = ioapic_read_entry(apic, i);
-
-		pr_debug(" %02x %02X  ", i, entry.dest);
-		pr_cont("%1d    %1d    %1d   %1d   %1d    "
-			"%1d    %1d    %02X\n",
-			entry.mask,
-			entry.trigger,
-			entry.irr,
-			entry.polarity,
-			entry.delivery_status,
-			entry.dest_mode,
-			entry.delivery_mode,
-			entry.vector);
-	}
+	raw_spin_lock_init(&ioapic_lock);
 }
 
-void intel_ir_io_apic_print_entries(unsigned int apic,
-				    unsigned int nr_entries)
+static void io_apic_print_entries(unsigned int apic, unsigned int nr_entries)
 {
 	int i;
+	char buf[256];
+	struct IO_APIC_route_entry entry;
+	struct IR_IO_APIC_route_entry *ir_entry = (void *)&entry;
 
-	pr_debug(" NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect:\n");
-
+	printk(KERN_DEBUG "IOAPIC %d:\n", apic);
 	for (i = 0; i <= nr_entries; i++) {
-		struct IR_IO_APIC_route_entry *ir_entry;
-		struct IO_APIC_route_entry entry;
-
 		entry = ioapic_read_entry(apic, i);
-
-		ir_entry = (struct IR_IO_APIC_route_entry *)&entry;
-
-		pr_debug(" %02x %04X ", i, ir_entry->index);
-		pr_cont("%1d   %1d    %1d    %1d   %1d   "
-			"%1d    %1d     %X    %02X\n",
-			ir_entry->format,
-			ir_entry->mask,
-			ir_entry->trigger,
-			ir_entry->irr,
-			ir_entry->polarity,
-			ir_entry->delivery_status,
-			ir_entry->index2,
-			ir_entry->zero,
-			ir_entry->vector);
+		snprintf(buf, sizeof(buf),
+			 " pin%02x, %s, %s, %s, V(%02X), IRR(%1d), S(%1d)",
+			 i,
+			 entry.mask == IOAPIC_MASKED ? "disabled" : "enabled ",
+			 entry.trigger == IOAPIC_LEVEL ? "level" : "edge ",
+			 entry.polarity == IOAPIC_POL_LOW ? "low " : "high",
+			 entry.vector, entry.irr, entry.delivery_status);
+		if (ir_entry->format)
+			printk(KERN_DEBUG "%s, remapped, I(%04X),  Z(%X)\n",
+			       buf, (ir_entry->index << 15) | ir_entry->index,
+			       ir_entry->zero);
+		else
+			printk(KERN_DEBUG "%s, %s, D(%02X), M(%1d)\n",
+			       buf,
+			       entry.dest_mode == IOAPIC_DEST_MODE_LOGICAL ?
+			       "logical " : "physical",
+			       entry.dest, entry.delivery_mode);
 	}
 }
 
-void ioapic_zap_locks(void)
-{
-	raw_spin_lock_init(&ioapic_lock);
-}
-
 static void __init print_IO_APIC(int ioapic_idx)
 {
 	union IO_APIC_reg_00 reg_00;
@@ -1451,16 +1329,13 @@ static void __init print_IO_APIC(int ioapic_idx)
 	}
 
 	printk(KERN_DEBUG ".... IRQ redirection table:\n");
-
-	x86_io_apic_ops.print_entries(ioapic_idx, reg_01.bits.entries);
+	io_apic_print_entries(ioapic_idx, reg_01.bits.entries);
 }
 
 void __init print_IO_APICs(void)
 {
 	int ioapic_idx;
-	struct irq_cfg *cfg;
 	unsigned int irq;
-	struct irq_chip *chip;
 
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for_each_ioapic(ioapic_idx)
@@ -1480,18 +1355,20 @@ void __init print_IO_APICs(void)
 	printk(KERN_DEBUG "IRQ to pin mappings:\n");
 	for_each_active_irq(irq) {
 		struct irq_pin_list *entry;
+		struct irq_chip *chip;
+		struct mp_chip_data *data;
 
 		chip = irq_get_chip(irq);
-		if (chip != &ioapic_chip)
+		if (chip != &ioapic_chip && chip != &ioapic_ir_chip)
 			continue;
-
-		cfg = irq_cfg(irq);
-		if (!cfg)
+		data = irq_get_chip_data(irq);
+		if (!data)
 			continue;
-		if (list_empty(&cfg->irq_2_pin))
+		if (list_empty(&data->irq_2_pin))
 			continue;
+
 		printk(KERN_DEBUG "IRQ%d ", irq);
-		for_each_irq_pin(entry, cfg->irq_2_pin)
+		for_each_irq_pin(entry, data->irq_2_pin)
 			pr_cont("-> %d:%d", entry->apic, entry->pin);
 		pr_cont("\n");
 	}
@@ -1564,15 +1441,12 @@ void native_disable_io_apic(void)
 		struct IO_APIC_route_entry entry;
 
 		memset(&entry, 0, sizeof(entry));
-		entry.mask            = 0; /* Enabled */
-		entry.trigger         = 0; /* Edge */
-		entry.irr             = 0;
-		entry.polarity        = 0; /* High */
-		entry.delivery_status = 0;
-		entry.dest_mode       = 0; /* Physical */
-		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
-		entry.vector          = 0;
-		entry.dest            = read_apic_id();
+		entry.mask		= IOAPIC_UNMASKED;
+		entry.trigger		= IOAPIC_EDGE;
+		entry.polarity		= IOAPIC_POL_HIGH;
+		entry.dest_mode		= IOAPIC_DEST_MODE_PHYSICAL;
+		entry.delivery_mode	= dest_ExtINT;
+		entry.dest		= read_apic_id();
 
 		/*
 		 * Add it to the IO-APIC irq-routing table:
@@ -1582,7 +1456,6 @@ void native_disable_io_apic(void)
 
 	if (cpu_has_apic || apic_from_smp_config())
 		disconnect_bsp_APIC(ioapic_i8259.pin != -1);
-
 }
 
 /*
@@ -1792,7 +1665,6 @@ static int __init timer_irq_works(void)
  * This is not complete - we should be able to fake
  * an edge even if it isn't on the 8259A...
  */
-
 static unsigned int startup_ioapic_irq(struct irq_data *data)
 {
 	int was_pending = 0, irq = data->irq;
@@ -1804,74 +1676,22 @@ static unsigned int startup_ioapic_irq(struct irq_data *data)
 		if (legacy_pic->irq_pending(irq))
 			was_pending = 1;
 	}
-	__unmask_ioapic(irqd_cfg(data));
+	__unmask_ioapic(data->chip_data);
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	return was_pending;
 }
 
-/*
- * Level and edge triggered IO-APIC interrupts need different handling,
- * so we use two separate IRQ descriptors. Edge triggered IRQs can be
- * handled with the level-triggered descriptor, but that one has slightly
- * more overhead. Level-triggered interrupts cannot be handled with the
- * edge-triggered handler, without risking IRQ storms and other ugly
- * races.
- */
-
-static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
-{
-	int apic, pin;
-	struct irq_pin_list *entry;
-	u8 vector = cfg->vector;
-
-	for_each_irq_pin(entry, cfg->irq_2_pin) {
-		unsigned int reg;
-
-		apic = entry->apic;
-		pin = entry->pin;
-
-		io_apic_write(apic, 0x11 + pin*2, dest);
-		reg = io_apic_read(apic, 0x10 + pin*2);
-		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
-		reg |= vector;
-		io_apic_modify(apic, 0x10 + pin*2, reg);
-	}
-}
-
-int native_ioapic_set_affinity(struct irq_data *data,
-			       const struct cpumask *mask,
-			       bool force)
-{
-	unsigned int dest, irq = data->irq;
-	unsigned long flags;
-	int ret;
-
-	if (!config_enabled(CONFIG_SMP))
-		return -EPERM;
-
-	raw_spin_lock_irqsave(&ioapic_lock, flags);
-	ret = apic_set_affinity(data, mask, &dest);
-	if (!ret) {
-		/* Only the high 8 bits are valid. */
-		dest = SET_APIC_LOGICAL_ID(dest);
-		__target_IO_APIC_irq(irq, dest, irqd_cfg(data));
-		ret = IRQ_SET_MASK_OK_NOCOPY;
-	}
-	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
-	return ret;
-}
-
 atomic_t irq_mis_count;
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
-static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
+static bool io_apic_level_ack_pending(struct mp_chip_data *data)
 {
 	struct irq_pin_list *entry;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&ioapic_lock, flags);
-	for_each_irq_pin(entry, cfg->irq_2_pin) {
+	for_each_irq_pin(entry, data->irq_2_pin) {
 		unsigned int reg;
 		int pin;
 
@@ -1888,18 +1708,17 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
 	return false;
 }
 
-static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg)
+static inline bool ioapic_irqd_mask(struct irq_data *data)
 {
 	/* If we are moving the irq we need to mask it */
 	if (unlikely(irqd_is_setaffinity_pending(data))) {
-		mask_ioapic(cfg);
+		mask_ioapic_irq(data);
 		return true;
 	}
 	return false;
 }
 
-static inline void ioapic_irqd_unmask(struct irq_data *data,
-				      struct irq_cfg *cfg, bool masked)
+static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked)
 {
 	if (unlikely(masked)) {
 		/* Only migrate the irq if the ack has been received.
@@ -1928,31 +1747,30 @@ static inline void ioapic_irqd_unmask(struct irq_data *data,
 		 * accurate and is causing problems then it is a hardware bug
 		 * and you can go talk to the chipset vendor about it.
 		 */
-		if (!io_apic_level_ack_pending(cfg))
+		if (!io_apic_level_ack_pending(data->chip_data))
 			irq_move_masked_irq(data);
-		unmask_ioapic(cfg);
+		unmask_ioapic_irq(data);
 	}
 }
 #else
-static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg)
+static inline bool ioapic_irqd_mask(struct irq_data *data)
 {
 	return false;
 }
-static inline void ioapic_irqd_unmask(struct irq_data *data,
-				      struct irq_cfg *cfg, bool masked)
+static inline void ioapic_irqd_unmask(struct irq_data *data, bool masked)
 {
 }
 #endif
 
-static void ack_ioapic_level(struct irq_data *data)
+static void ioapic_ack_level(struct irq_data *irq_data)
 {
-	struct irq_cfg *cfg = irqd_cfg(data);
-	int i, irq = data->irq;
+	struct irq_cfg *cfg = irqd_cfg(irq_data);
 	unsigned long v;
 	bool masked;
+	int i;
 
 	irq_complete_move(cfg);
-	masked = ioapic_irqd_mask(data, cfg);
+	masked = ioapic_irqd_mask(irq_data);
 
 	/*
 	 * It appears there is an erratum which affects at least version 0x11
@@ -2004,11 +1822,49 @@ static void ack_ioapic_level(struct irq_data *data)
 	 */
 	if (!(v & (1 << (i & 0x1f)))) {
 		atomic_inc(&irq_mis_count);
+		eoi_ioapic_pin(cfg->vector, irq_data->chip_data);
+	}
+
+	ioapic_irqd_unmask(irq_data, masked);
+}
+
+static void ioapic_ir_ack_level(struct irq_data *irq_data)
+{
+	struct mp_chip_data *data = irq_data->chip_data;
+
+	/*
+	 * Intr-remapping uses pin number as the virtual vector
+	 * in the RTE. Actual vector is programmed in
+	 * intr-remapping table entry. Hence for the io-apic
+	 * EOI we use the pin number.
+	 */
+	ack_APIC_irq();
+	eoi_ioapic_pin(data->entry.vector, data);
+}
 
-		eoi_ioapic_irq(irq, cfg);
+static int ioapic_set_affinity(struct irq_data *irq_data,
+			       const struct cpumask *mask, bool force)
+{
+	struct irq_data *parent = irq_data->parent_data;
+	struct mp_chip_data *data = irq_data->chip_data;
+	struct irq_pin_list *entry;
+	struct irq_cfg *cfg;
+	unsigned long flags;
+	int ret;
+
+	ret = parent->chip->irq_set_affinity(parent, mask, force);
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
+	if (ret >= 0 && ret != IRQ_SET_MASK_OK_DONE) {
+		cfg = irqd_cfg(irq_data);
+		data->entry.dest = cfg->dest_apicid;
+		data->entry.vector = cfg->vector;
+		for_each_irq_pin(entry, data->irq_2_pin)
+			__ioapic_write_entry(entry->apic, entry->pin,
+					     data->entry);
 	}
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
-	ioapic_irqd_unmask(data, cfg, masked);
+	return ret;
 }
 
 static struct irq_chip ioapic_chip __read_mostly = {
@@ -2016,10 +1872,20 @@ static struct irq_chip ioapic_chip __read_mostly = {
 	.irq_startup		= startup_ioapic_irq,
 	.irq_mask		= mask_ioapic_irq,
 	.irq_unmask		= unmask_ioapic_irq,
-	.irq_ack		= apic_ack_edge,
-	.irq_eoi		= ack_ioapic_level,
-	.irq_set_affinity	= native_ioapic_set_affinity,
-	.irq_retrigger		= apic_retrigger_irq,
+	.irq_ack		= irq_chip_ack_parent,
+	.irq_eoi		= ioapic_ack_level,
+	.irq_set_affinity	= ioapic_set_affinity,
+	.flags			= IRQCHIP_SKIP_SET_WAKE,
+};
+
+static struct irq_chip ioapic_ir_chip __read_mostly = {
+	.name			= "IR-IO-APIC",
+	.irq_startup		= startup_ioapic_irq,
+	.irq_mask		= mask_ioapic_irq,
+	.irq_unmask		= unmask_ioapic_irq,
+	.irq_ack		= irq_chip_ack_parent,
+	.irq_eoi		= ioapic_ir_ack_level,
+	.irq_set_affinity	= ioapic_set_affinity,
 	.flags			= IRQCHIP_SKIP_SET_WAKE,
 };
 
@@ -2113,12 +1979,12 @@ static inline void __init unlock_ExtINT_logic(void)
 
 	memset(&entry1, 0, sizeof(entry1));
 
-	entry1.dest_mode = 0;			/* physical delivery */
-	entry1.mask = 0;			/* unmask IRQ now */
+	entry1.dest_mode = IOAPIC_DEST_MODE_PHYSICAL;
+	entry1.mask = IOAPIC_UNMASKED;
 	entry1.dest = hard_smp_processor_id();
 	entry1.delivery_mode = dest_ExtINT;
 	entry1.polarity = entry0.polarity;
-	entry1.trigger = 0;
+	entry1.trigger = IOAPIC_EDGE;
 	entry1.vector = 0;
 
 	ioapic_write_entry(apic, pin, entry1);
@@ -2152,6 +2018,25 @@ static int __init disable_timer_pin_setup(char *arg)
 }
 early_param("disable_timer_pin_1", disable_timer_pin_setup);
 
+static int mp_alloc_timer_irq(int ioapic, int pin)
+{
+	int irq = -1;
+	struct irq_domain *domain = mp_ioapic_irqdomain(ioapic);
+
+	if (domain) {
+		struct irq_alloc_info info;
+
+		ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 0, 0);
+		info.ioapic_id = mpc_ioapic_id(ioapic);
+		info.ioapic_pin = pin;
+		mutex_lock(&ioapic_mutex);
+		irq = alloc_isa_irq_from_domain(domain, 0, ioapic, pin, &info);
+		mutex_unlock(&ioapic_mutex);
+	}
+
+	return irq;
+}
+
 /*
  * This code may look a bit paranoid, but it's supposed to cooperate with
  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
@@ -2162,7 +2047,9 @@ early_param("disable_timer_pin_1", disable_timer_pin_setup);
  */
 static inline void __init check_timer(void)
 {
-	struct irq_cfg *cfg = irq_cfg(0);
+	struct irq_data *irq_data = irq_get_irq_data(0);
+	struct mp_chip_data *data = irq_data->chip_data;
+	struct irq_cfg *cfg = irqd_cfg(irq_data);
 	int node = cpu_to_node(0);
 	int apic1, pin1, apic2, pin2;
 	unsigned long flags;
@@ -2174,7 +2061,6 @@ static inline void __init check_timer(void)
 	 * get/set the timer IRQ vector:
 	 */
 	legacy_pic->mask(0);
-	assign_irq_vector(0, cfg, apic->target_cpus());
 
 	/*
 	 * As IRQ0 is to be enabled in the 8259A, the virtual
@@ -2215,23 +2101,21 @@ static inline void __init check_timer(void)
 	}
 
 	if (pin1 != -1) {
-		/*
-		 * Ok, does IRQ0 through the IOAPIC work?
-		 */
+		/* Ok, does IRQ0 through the IOAPIC work? */
 		if (no_pin1) {
-			add_pin_to_irq_node(cfg, node, apic1, pin1);
-			setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
+			mp_alloc_timer_irq(apic1, pin1);
 		} else {
-			/* for edge trigger, setup_ioapic_irq already
-			 * leave it unmasked.
+			/*
+			 * for edge trigger, it's already unmasked,
 			 * so only need to unmask if it is level-trigger
 			 * do we really have level trigger timer?
 			 */
 			int idx;
 			idx = find_irq_entry(apic1, pin1, mp_INT);
 			if (idx != -1 && irq_trigger(idx))
-				unmask_ioapic(cfg);
+				unmask_ioapic_irq(irq_get_chip_data(0));
 		}
+		irq_domain_activate_irq(irq_data);
 		if (timer_irq_works()) {
 			if (disable_timer_pin_1 > 0)
 				clear_IO_APIC_pin(0, pin1);
@@ -2251,8 +2135,8 @@ static inline void __init check_timer(void)
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
-		replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2);
-		setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
+		replace_pin_at_irq_node(data, node, apic1, pin1, apic2, pin2);
+		irq_domain_activate_irq(irq_data);
 		legacy_pic->unmask(0);
 		if (timer_irq_works()) {
 			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
@@ -2329,36 +2213,35 @@ out:
 
 static int mp_irqdomain_create(int ioapic)
 {
-	size_t size;
+	struct irq_alloc_info info;
+	struct irq_domain *parent;
 	int hwirqs = mp_ioapic_pin_count(ioapic);
 	struct ioapic *ip = &ioapics[ioapic];
 	struct ioapic_domain_cfg *cfg = &ip->irqdomain_cfg;
 	struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic);
 
-	size = sizeof(struct mp_pin_info) * mp_ioapic_pin_count(ioapic);
-	ip->pin_info = kzalloc(size, GFP_KERNEL);
-	if (!ip->pin_info)
-		return -ENOMEM;
-
 	if (cfg->type == IOAPIC_DOMAIN_INVALID)
 		return 0;
 
+	init_irq_alloc_info(&info, NULL);
+	info.type = X86_IRQ_ALLOC_TYPE_IOAPIC;
+	info.ioapic_id = mpc_ioapic_id(ioapic);
+	parent = irq_remapping_get_ir_irq_domain(&info);
+	if (!parent)
+		parent = x86_vector_domain;
+
 	ip->irqdomain = irq_domain_add_linear(cfg->dev, hwirqs, cfg->ops,
 					      (void *)(long)ioapic);
-	if(!ip->irqdomain) {
-		kfree(ip->pin_info);
-		ip->pin_info = NULL;
+	if (!ip->irqdomain)
 		return -ENOMEM;
-	}
+
+	ip->irqdomain->parent = parent;
 
 	if (cfg->type == IOAPIC_DOMAIN_LEGACY ||
 	    cfg->type == IOAPIC_DOMAIN_STRICT)
 		ioapic_dynirq_base = max(ioapic_dynirq_base,
 					 gsi_cfg->gsi_end + 1);
 
-	if (gsi_cfg->gsi_base == 0)
-		irq_set_default_host(ip->irqdomain);
-
 	return 0;
 }
 
@@ -2368,8 +2251,6 @@ static void ioapic_destroy_irqdomain(int idx)
 		irq_domain_remove(ioapics[idx].irqdomain);
 		ioapics[idx].irqdomain = NULL;
 	}
-	kfree(ioapics[idx].pin_info);
-	ioapics[idx].pin_info = NULL;
 }
 
 void __init setup_IO_APIC(void)
@@ -2399,20 +2280,6 @@ void __init setup_IO_APIC(void)
 	ioapic_initialized = 1;
 }
 
-/*
- *      Called after all the initialization is done. If we didn't find any
- *      APIC bugs then we can allow the modify fast path
- */
-
-static int __init io_apic_bug_finalize(void)
-{
-	if (sis_apic_bug == -1)
-		sis_apic_bug = 0;
-	return 0;
-}
-
-late_initcall(io_apic_bug_finalize);
-
 static void resume_ioapic_id(int ioapic_idx)
 {
 	unsigned long flags;
@@ -2451,20 +2318,6 @@ static int __init ioapic_init_ops(void)
 
 device_initcall(ioapic_init_ops);
 
-static int
-io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr)
-{
-	struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node);
-	int ret;
-
-	if (!cfg)
-		return -EINVAL;
-	ret = __add_pin_to_irq_node(cfg, node, attr->ioapic, attr->ioapic_pin);
-	if (!ret)
-		setup_ioapic_irq(irq, cfg, attr);
-	return ret;
-}
-
 static int io_apic_get_redir_entries(int ioapic)
 {
 	union IO_APIC_reg_01	reg_01;
@@ -2692,7 +2545,7 @@ void __init setup_ioapic_dest(void)
 		else
 			mask = apic->target_cpus();
 
-		x86_io_apic_ops.set_affinity(idata, mask, false);
+		irq_set_affinity(irq, mask);
 	}
 
 }
@@ -2737,7 +2590,7 @@ static struct resource * __init ioapic_setup_resources(void)
 	return res;
 }
 
-void __init native_io_apic_init_mappings(void)
+void __init io_apic_init_mappings(void)
 {
 	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
 	struct resource *ioapic_res;
@@ -2962,7 +2815,6 @@ int mp_unregister_ioapic(u32 gsi_base)
 {
 	int ioapic, pin;
 	int found = 0;
-	struct mp_pin_info *pin_info;
 
 	for_each_ioapic(ioapic)
 		if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) {
@@ -2975,11 +2827,17 @@ int mp_unregister_ioapic(u32 gsi_base)
 	}
 
 	for_each_pin(ioapic, pin) {
-		pin_info = mp_pin_info(ioapic, pin);
-		if (pin_info->count) {
-			pr_warn("pin%d on IOAPIC%d is still in use.\n",
-				pin, ioapic);
-			return -EBUSY;
+		u32 gsi = mp_pin_to_gsi(ioapic, pin);
+		int irq = mp_map_gsi_to_irq(gsi, 0, NULL);
+		struct mp_chip_data *data;
+
+		if (irq >= 0) {
+			data = irq_get_chip_data(irq);
+			if (data && data->count) {
+				pr_warn("pin%d on IOAPIC%d is still in use.\n",
+					pin, ioapic);
+				return -EBUSY;
+			}
 		}
 	}
 
@@ -3006,108 +2864,141 @@ int mp_ioapic_registered(u32 gsi_base)
 	return 0;
 }
 
-static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
-					int ioapic, int ioapic_pin,
-					int trigger, int polarity)
+static void mp_irqdomain_get_attr(u32 gsi, struct mp_chip_data *data,
+				  struct irq_alloc_info *info)
 {
-	irq_attr->ioapic	= ioapic;
-	irq_attr->ioapic_pin	= ioapic_pin;
-	irq_attr->trigger	= trigger;
-	irq_attr->polarity	= polarity;
+	if (info && info->ioapic_valid) {
+		data->trigger = info->ioapic_trigger;
+		data->polarity = info->ioapic_polarity;
+	} else if (acpi_get_override_irq(gsi, &data->trigger,
+					 &data->polarity) < 0) {
+		/* PCI interrupts are always active low level triggered. */
+		data->trigger = IOAPIC_LEVEL;
+		data->polarity = IOAPIC_POL_LOW;
+	}
 }
 
-int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq,
-		     irq_hw_number_t hwirq)
+static void mp_setup_entry(struct irq_cfg *cfg, struct mp_chip_data *data,
+			   struct IO_APIC_route_entry *entry)
 {
-	int ioapic = (int)(long)domain->host_data;
-	struct mp_pin_info *info = mp_pin_info(ioapic, hwirq);
-	struct io_apic_irq_attr attr;
+	memset(entry, 0, sizeof(*entry));
+	entry->delivery_mode = apic->irq_delivery_mode;
+	entry->dest_mode     = apic->irq_dest_mode;
+	entry->dest	     = cfg->dest_apicid;
+	entry->vector	     = cfg->vector;
+	entry->trigger	     = data->trigger;
+	entry->polarity	     = data->polarity;
+	/*
+	 * Mask level triggered irqs. Edge triggered irqs are masked
+	 * by the irq core code in case they fire.
+	 */
+	if (data->trigger == IOAPIC_LEVEL)
+		entry->mask = IOAPIC_MASKED;
+	else
+		entry->mask = IOAPIC_UNMASKED;
+}
 
-	/* Get default attribute if not set by caller yet */
-	if (!info->set) {
-		u32 gsi = mp_pin_to_gsi(ioapic, hwirq);
+int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
+		       unsigned int nr_irqs, void *arg)
+{
+	int ret, ioapic, pin;
+	struct irq_cfg *cfg;
+	struct irq_data *irq_data;
+	struct mp_chip_data *data;
+	struct irq_alloc_info *info = arg;
 
-		if (acpi_get_override_irq(gsi, &info->trigger,
-					  &info->polarity) < 0) {
-			/*
-			 * PCI interrupts are always polarity one level
-			 * triggered.
-			 */
-			info->trigger = 1;
-			info->polarity = 1;
-		}
-		info->node = NUMA_NO_NODE;
+	if (!info || nr_irqs > 1)
+		return -EINVAL;
+	irq_data = irq_domain_get_irq_data(domain, virq);
+	if (!irq_data)
+		return -EINVAL;
 
-		/*
-		 * setup_IO_APIC_irqs() programs all legacy IRQs with default
-		 * trigger and polarity attributes. Don't set the flag for that
-		 * case so the first legacy IRQ user could reprogram the pin
-		 * with real trigger and polarity attributes.
-		 */
-		if (virq >= nr_legacy_irqs() || info->count)
-			info->set = 1;
-	}
-	set_io_apic_irq_attr(&attr, ioapic, hwirq, info->trigger,
-			     info->polarity);
+	ioapic = mp_irqdomain_ioapic_idx(domain);
+	pin = info->ioapic_pin;
+	if (irq_find_mapping(domain, (irq_hw_number_t)pin) > 0)
+		return -EEXIST;
 
-	return io_apic_setup_irq_pin(virq, info->node, &attr);
-}
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
 
-void mp_irqdomain_unmap(struct irq_domain *domain, unsigned int virq)
-{
-	struct irq_data *data = irq_get_irq_data(virq);
-	struct irq_cfg *cfg = irq_cfg(virq);
-	int ioapic = (int)(long)domain->host_data;
-	int pin = (int)data->hwirq;
+	info->ioapic_entry = &data->entry;
+	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, info);
+	if (ret < 0) {
+		kfree(data);
+		return ret;
+	}
+
+	INIT_LIST_HEAD(&data->irq_2_pin);
+	irq_data->hwirq = info->ioapic_pin;
+	irq_data->chip = (domain->parent == x86_vector_domain) ?
+			  &ioapic_chip : &ioapic_ir_chip;
+	irq_data->chip_data = data;
+	mp_irqdomain_get_attr(mp_pin_to_gsi(ioapic, pin), data, info);
+
+	cfg = irqd_cfg(irq_data);
+	add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin);
+	if (info->ioapic_entry)
+		mp_setup_entry(cfg, data, info->ioapic_entry);
+	mp_register_handler(virq, data->trigger);
+	if (virq < nr_legacy_irqs())
+		legacy_pic->mask(virq);
+
+	apic_printk(APIC_VERBOSE, KERN_DEBUG
+		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i Dest:%d)\n",
+		    ioapic, mpc_ioapic_id(ioapic), pin, cfg->vector,
+		    virq, data->trigger, data->polarity, cfg->dest_apicid);
 
-	ioapic_mask_entry(ioapic, pin);
-	__remove_pin_from_irq(cfg, ioapic, pin);
-	WARN_ON(!list_empty(&cfg->irq_2_pin));
-	arch_teardown_hwirq(virq);
+	return 0;
 }
 
-int mp_set_gsi_attr(u32 gsi, int trigger, int polarity, int node)
+void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
+		       unsigned int nr_irqs)
 {
-	int ret = 0;
-	int ioapic, pin;
-	struct mp_pin_info *info;
+	struct irq_data *irq_data;
+	struct mp_chip_data *data;
 
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0)
-		return -ENODEV;
-
-	pin = mp_find_ioapic_pin(ioapic, gsi);
-	info = mp_pin_info(ioapic, pin);
-	trigger = trigger ? 1 : 0;
-	polarity = polarity ? 1 : 0;
-
-	mutex_lock(&ioapic_mutex);
-	if (!info->set) {
-		info->trigger = trigger;
-		info->polarity = polarity;
-		info->node = node;
-		info->set = 1;
-	} else if (info->trigger != trigger || info->polarity != polarity) {
-		ret = -EBUSY;
+	BUG_ON(nr_irqs != 1);
+	irq_data = irq_domain_get_irq_data(domain, virq);
+	if (irq_data && irq_data->chip_data) {
+		data = irq_data->chip_data;
+		__remove_pin_from_irq(data, mp_irqdomain_ioapic_idx(domain),
+				      (int)irq_data->hwirq);
+		WARN_ON(!list_empty(&data->irq_2_pin));
+		kfree(irq_data->chip_data);
 	}
-	mutex_unlock(&ioapic_mutex);
-
-	return ret;
+	irq_domain_free_irqs_top(domain, virq, nr_irqs);
 }
 
-/* Enable IOAPIC early just for system timer */
-void __init pre_init_apic_IRQ0(void)
+void mp_irqdomain_activate(struct irq_domain *domain,
+			   struct irq_data *irq_data)
 {
-	struct io_apic_irq_attr attr = { 0, 0, 0, 0 };
+	unsigned long flags;
+	struct irq_pin_list *entry;
+	struct mp_chip_data *data = irq_data->chip_data;
 
-	printk(KERN_INFO "Early APIC setup for system timer0\n");
-#ifndef CONFIG_SMP
-	physid_set_mask_of_physid(boot_cpu_physical_apicid,
-					 &phys_cpu_present_map);
-#endif
-	setup_local_APIC();
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
+	for_each_irq_pin(entry, data->irq_2_pin)
+		__ioapic_write_entry(entry->apic, entry->pin, data->entry);
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+}
 
-	io_apic_setup_irq_pin(0, 0, &attr);
-	irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq,
-				      "edge");
+void mp_irqdomain_deactivate(struct irq_domain *domain,
+			     struct irq_data *irq_data)
+{
+	/* It won't be called for IRQ with multiple IOAPIC pins associated */
+	ioapic_mask_entry(mp_irqdomain_ioapic_idx(domain),
+			  (int)irq_data->hwirq);
+}
+
+int mp_irqdomain_ioapic_idx(struct irq_domain *domain)
+{
+	return (int)(long)domain->host_data;
 }
+
+const struct irq_domain_ops mp_ioapic_irqdomain_ops = {
+	.alloc		= mp_irqdomain_alloc,
+	.free		= mp_irqdomain_free,
+	.activate	= mp_irqdomain_activate,
+	.deactivate	= mp_irqdomain_deactivate,
+};