diff options
author | Thomas Gleixner <tglx@linutronix.de> | 2009-08-27 16:42:07 +0200 |
---|---|---|
committer | Thomas Gleixner <tglx@linutronix.de> | 2009-08-27 16:42:32 +0200 |
commit | 6effcd92454ca5d7021b74f89fcac75209e146f9 (patch) | |
tree | 6a3ebef5074ca4721f8f36fe85b9287a16ba2a01 /arch/x86/include | |
parent | 10f02d1168585edf66229bb2ec90a42f32667a78 (diff) | |
parent | ac5672f82c39ff2f8dce81bf3e68b1dfc41f366f (diff) | |
download | op-kernel-dev-6effcd92454ca5d7021b74f89fcac75209e146f9.zip op-kernel-dev-6effcd92454ca5d7021b74f89fcac75209e146f9.tar.gz |
Merge branch 'x86/paravirt' into x86/cleanups
Reason: The setup cleanups conflict with the paravirt cleanups. Avoid
a rather large merge conflict
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'arch/x86/include')
-rw-r--r-- | arch/x86/include/asm/paravirt.h | 711 | ||||
-rw-r--r-- | arch/x86/include/asm/paravirt_types.h | 720 |
2 files changed, 721 insertions, 710 deletions
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 4fb37c8..6a07af4 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -7,689 +7,11 @@ #include <asm/pgtable_types.h> #include <asm/asm.h> -/* Bitmask of what can be clobbered: usually at least eax. */ -#define CLBR_NONE 0 -#define CLBR_EAX (1 << 0) -#define CLBR_ECX (1 << 1) -#define CLBR_EDX (1 << 2) -#define CLBR_EDI (1 << 3) - -#ifdef CONFIG_X86_32 -/* CLBR_ANY should match all regs platform has. For i386, that's just it */ -#define CLBR_ANY ((1 << 4) - 1) - -#define CLBR_ARG_REGS (CLBR_EAX | CLBR_EDX | CLBR_ECX) -#define CLBR_RET_REG (CLBR_EAX | CLBR_EDX) -#define CLBR_SCRATCH (0) -#else -#define CLBR_RAX CLBR_EAX -#define CLBR_RCX CLBR_ECX -#define CLBR_RDX CLBR_EDX -#define CLBR_RDI CLBR_EDI -#define CLBR_RSI (1 << 4) -#define CLBR_R8 (1 << 5) -#define CLBR_R9 (1 << 6) -#define CLBR_R10 (1 << 7) -#define CLBR_R11 (1 << 8) - -#define CLBR_ANY ((1 << 9) - 1) - -#define CLBR_ARG_REGS (CLBR_RDI | CLBR_RSI | CLBR_RDX | \ - CLBR_RCX | CLBR_R8 | CLBR_R9) -#define CLBR_RET_REG (CLBR_RAX) -#define CLBR_SCRATCH (CLBR_R10 | CLBR_R11) - -#include <asm/desc_defs.h> -#endif /* X86_64 */ - -#define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG) +#include <asm/paravirt_types.h> #ifndef __ASSEMBLY__ #include <linux/types.h> #include <linux/cpumask.h> -#include <asm/kmap_types.h> -#include <asm/desc_defs.h> - -struct page; -struct thread_struct; -struct desc_ptr; -struct tss_struct; -struct mm_struct; -struct desc_struct; -struct task_struct; - -/* - * Wrapper type for pointers to code which uses the non-standard - * calling convention. See PV_CALL_SAVE_REGS_THUNK below. - */ -struct paravirt_callee_save { - void *func; -}; - -/* general info */ -struct pv_info { - unsigned int kernel_rpl; - int shared_kernel_pmd; - int paravirt_enabled; - const char *name; -}; - -struct pv_init_ops { - /* - * Patch may replace one of the defined code sequences with - * arbitrary code, subject to the same register constraints. - * This generally means the code is not free to clobber any - * registers other than EAX. The patch function should return - * the number of bytes of code generated, as we nop pad the - * rest in generic code. - */ - unsigned (*patch)(u8 type, u16 clobber, void *insnbuf, - unsigned long addr, unsigned len); - - /* Basic arch-specific setup */ - void (*arch_setup)(void); - char *(*memory_setup)(void); - void (*post_allocator_init)(void); - - /* Print a banner to identify the environment */ - void (*banner)(void); -}; - - -struct pv_lazy_ops { - /* Set deferred update mode, used for batching operations. */ - void (*enter)(void); - void (*leave)(void); -}; - -struct pv_time_ops { - void (*time_init)(void); - - /* Set and set time of day */ - unsigned long (*get_wallclock)(void); - int (*set_wallclock)(unsigned long); - - unsigned long long (*sched_clock)(void); - unsigned long (*get_tsc_khz)(void); -}; - -struct pv_cpu_ops { - /* hooks for various privileged instructions */ - unsigned long (*get_debugreg)(int regno); - void (*set_debugreg)(int regno, unsigned long value); - - void (*clts)(void); - - unsigned long (*read_cr0)(void); - void (*write_cr0)(unsigned long); - - unsigned long (*read_cr4_safe)(void); - unsigned long (*read_cr4)(void); - void (*write_cr4)(unsigned long); - -#ifdef CONFIG_X86_64 - unsigned long (*read_cr8)(void); - void (*write_cr8)(unsigned long); -#endif - - /* Segment descriptor handling */ - void (*load_tr_desc)(void); - void (*load_gdt)(const struct desc_ptr *); - void (*load_idt)(const struct desc_ptr *); - void (*store_gdt)(struct desc_ptr *); - void (*store_idt)(struct desc_ptr *); - void (*set_ldt)(const void *desc, unsigned entries); - unsigned long (*store_tr)(void); - void (*load_tls)(struct thread_struct *t, unsigned int cpu); -#ifdef CONFIG_X86_64 - void (*load_gs_index)(unsigned int idx); -#endif - void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum, - const void *desc); - void (*write_gdt_entry)(struct desc_struct *, - int entrynum, const void *desc, int size); - void (*write_idt_entry)(gate_desc *, - int entrynum, const gate_desc *gate); - void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries); - void (*free_ldt)(struct desc_struct *ldt, unsigned entries); - - void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t); - - void (*set_iopl_mask)(unsigned mask); - - void (*wbinvd)(void); - void (*io_delay)(void); - - /* cpuid emulation, mostly so that caps bits can be disabled */ - void (*cpuid)(unsigned int *eax, unsigned int *ebx, - unsigned int *ecx, unsigned int *edx); - - /* MSR, PMC and TSR operations. - err = 0/-EFAULT. wrmsr returns 0/-EFAULT. */ - u64 (*read_msr_amd)(unsigned int msr, int *err); - u64 (*read_msr)(unsigned int msr, int *err); - int (*write_msr)(unsigned int msr, unsigned low, unsigned high); - - u64 (*read_tsc)(void); - u64 (*read_pmc)(int counter); - unsigned long long (*read_tscp)(unsigned int *aux); - - /* - * Atomically enable interrupts and return to userspace. This - * is only ever used to return to 32-bit processes; in a - * 64-bit kernel, it's used for 32-on-64 compat processes, but - * never native 64-bit processes. (Jump, not call.) - */ - void (*irq_enable_sysexit)(void); - - /* - * Switch to usermode gs and return to 64-bit usermode using - * sysret. Only used in 64-bit kernels to return to 64-bit - * processes. Usermode register state, including %rsp, must - * already be restored. - */ - void (*usergs_sysret64)(void); - - /* - * Switch to usermode gs and return to 32-bit usermode using - * sysret. Used to return to 32-on-64 compat processes. - * Other usermode register state, including %esp, must already - * be restored. - */ - void (*usergs_sysret32)(void); - - /* Normal iret. Jump to this with the standard iret stack - frame set up. */ - void (*iret)(void); - - void (*swapgs)(void); - - void (*start_context_switch)(struct task_struct *prev); - void (*end_context_switch)(struct task_struct *next); -}; - -struct pv_irq_ops { - void (*init_IRQ)(void); - - /* - * Get/set interrupt state. save_fl and restore_fl are only - * expected to use X86_EFLAGS_IF; all other bits - * returned from save_fl are undefined, and may be ignored by - * restore_fl. - * - * NOTE: These functions callers expect the callee to preserve - * more registers than the standard C calling convention. - */ - struct paravirt_callee_save save_fl; - struct paravirt_callee_save restore_fl; - struct paravirt_callee_save irq_disable; - struct paravirt_callee_save irq_enable; - - void (*safe_halt)(void); - void (*halt)(void); - -#ifdef CONFIG_X86_64 - void (*adjust_exception_frame)(void); -#endif -}; - -struct pv_apic_ops { -#ifdef CONFIG_X86_LOCAL_APIC - void (*setup_boot_clock)(void); - void (*setup_secondary_clock)(void); - - void (*startup_ipi_hook)(int phys_apicid, - unsigned long start_eip, - unsigned long start_esp); -#endif -}; - -struct pv_mmu_ops { - /* - * Called before/after init_mm pagetable setup. setup_start - * may reset %cr3, and may pre-install parts of the pagetable; - * pagetable setup is expected to preserve any existing - * mapping. - */ - void (*pagetable_setup_start)(pgd_t *pgd_base); - void (*pagetable_setup_done)(pgd_t *pgd_base); - - unsigned long (*read_cr2)(void); - void (*write_cr2)(unsigned long); - - unsigned long (*read_cr3)(void); - void (*write_cr3)(unsigned long); - - /* - * Hooks for intercepting the creation/use/destruction of an - * mm_struct. - */ - void (*activate_mm)(struct mm_struct *prev, - struct mm_struct *next); - void (*dup_mmap)(struct mm_struct *oldmm, - struct mm_struct *mm); - void (*exit_mmap)(struct mm_struct *mm); - - - /* TLB operations */ - void (*flush_tlb_user)(void); - void (*flush_tlb_kernel)(void); - void (*flush_tlb_single)(unsigned long addr); - void (*flush_tlb_others)(const struct cpumask *cpus, - struct mm_struct *mm, - unsigned long va); - - /* Hooks for allocating and freeing a pagetable top-level */ - int (*pgd_alloc)(struct mm_struct *mm); - void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd); - - /* - * Hooks for allocating/releasing pagetable pages when they're - * attached to a pagetable - */ - void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn); - void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn); - void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count); - void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn); - void (*release_pte)(unsigned long pfn); - void (*release_pmd)(unsigned long pfn); - void (*release_pud)(unsigned long pfn); - - /* Pagetable manipulation functions */ - void (*set_pte)(pte_t *ptep, pte_t pteval); - void (*set_pte_at)(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval); - void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval); - void (*pte_update)(struct mm_struct *mm, unsigned long addr, - pte_t *ptep); - void (*pte_update_defer)(struct mm_struct *mm, - unsigned long addr, pte_t *ptep); - - pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr, - pte_t *ptep); - void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte); - - struct paravirt_callee_save pte_val; - struct paravirt_callee_save make_pte; - - struct paravirt_callee_save pgd_val; - struct paravirt_callee_save make_pgd; - -#if PAGETABLE_LEVELS >= 3 -#ifdef CONFIG_X86_PAE - void (*set_pte_atomic)(pte_t *ptep, pte_t pteval); - void (*pte_clear)(struct mm_struct *mm, unsigned long addr, - pte_t *ptep); - void (*pmd_clear)(pmd_t *pmdp); - -#endif /* CONFIG_X86_PAE */ - - void (*set_pud)(pud_t *pudp, pud_t pudval); - - struct paravirt_callee_save pmd_val; - struct paravirt_callee_save make_pmd; - -#if PAGETABLE_LEVELS == 4 - struct paravirt_callee_save pud_val; - struct paravirt_callee_save make_pud; - - void (*set_pgd)(pgd_t *pudp, pgd_t pgdval); -#endif /* PAGETABLE_LEVELS == 4 */ -#endif /* PAGETABLE_LEVELS >= 3 */ - -#ifdef CONFIG_HIGHPTE - void *(*kmap_atomic_pte)(struct page *page, enum km_type type); -#endif - - struct pv_lazy_ops lazy_mode; - - /* dom0 ops */ - - /* Sometimes the physical address is a pfn, and sometimes its - an mfn. We can tell which is which from the index. */ - void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx, - phys_addr_t phys, pgprot_t flags); -}; - -struct raw_spinlock; -struct pv_lock_ops { - int (*spin_is_locked)(struct raw_spinlock *lock); - int (*spin_is_contended)(struct raw_spinlock *lock); - void (*spin_lock)(struct raw_spinlock *lock); - void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags); - int (*spin_trylock)(struct raw_spinlock *lock); - void (*spin_unlock)(struct raw_spinlock *lock); -}; - -/* This contains all the paravirt structures: we get a convenient - * number for each function using the offset which we use to indicate - * what to patch. */ -struct paravirt_patch_template { - struct pv_init_ops pv_init_ops; - struct pv_time_ops pv_time_ops; - struct pv_cpu_ops pv_cpu_ops; - struct pv_irq_ops pv_irq_ops; - struct pv_apic_ops pv_apic_ops; - struct pv_mmu_ops pv_mmu_ops; - struct pv_lock_ops pv_lock_ops; -}; - -extern struct pv_info pv_info; -extern struct pv_init_ops pv_init_ops; -extern struct pv_time_ops pv_time_ops; -extern struct pv_cpu_ops pv_cpu_ops; -extern struct pv_irq_ops pv_irq_ops; -extern struct pv_apic_ops pv_apic_ops; -extern struct pv_mmu_ops pv_mmu_ops; -extern struct pv_lock_ops pv_lock_ops; - -#define PARAVIRT_PATCH(x) \ - (offsetof(struct paravirt_patch_template, x) / sizeof(void *)) - -#define paravirt_type(op) \ - [paravirt_typenum] "i" (PARAVIRT_PATCH(op)), \ - [paravirt_opptr] "i" (&(op)) -#define paravirt_clobber(clobber) \ - [paravirt_clobber] "i" (clobber) - -/* - * Generate some code, and mark it as patchable by the - * apply_paravirt() alternate instruction patcher. - */ -#define _paravirt_alt(insn_string, type, clobber) \ - "771:\n\t" insn_string "\n" "772:\n" \ - ".pushsection .parainstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ - _ASM_PTR " 771b\n" \ - " .byte " type "\n" \ - " .byte 772b-771b\n" \ - " .short " clobber "\n" \ - ".popsection\n" - -/* Generate patchable code, with the default asm parameters. */ -#define paravirt_alt(insn_string) \ - _paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]") - -/* Simple instruction patching code. */ -#define DEF_NATIVE(ops, name, code) \ - extern const char start_##ops##_##name[], end_##ops##_##name[]; \ - asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":") - -unsigned paravirt_patch_nop(void); -unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len); -unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len); -unsigned paravirt_patch_ignore(unsigned len); -unsigned paravirt_patch_call(void *insnbuf, - const void *target, u16 tgt_clobbers, - unsigned long addr, u16 site_clobbers, - unsigned len); -unsigned paravirt_patch_jmp(void *insnbuf, const void *target, - unsigned long addr, unsigned len); -unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf, - unsigned long addr, unsigned len); - -unsigned paravirt_patch_insns(void *insnbuf, unsigned len, - const char *start, const char *end); - -unsigned native_patch(u8 type, u16 clobbers, void *ibuf, - unsigned long addr, unsigned len); - -int paravirt_disable_iospace(void); - -/* - * This generates an indirect call based on the operation type number. - * The type number, computed in PARAVIRT_PATCH, is derived from the - * offset into the paravirt_patch_template structure, and can therefore be - * freely converted back into a structure offset. - */ -#define PARAVIRT_CALL "call *%c[paravirt_opptr];" - -/* - * These macros are intended to wrap calls through one of the paravirt - * ops structs, so that they can be later identified and patched at - * runtime. - * - * Normally, a call to a pv_op function is a simple indirect call: - * (pv_op_struct.operations)(args...). - * - * Unfortunately, this is a relatively slow operation for modern CPUs, - * because it cannot necessarily determine what the destination - * address is. In this case, the address is a runtime constant, so at - * the very least we can patch the call to e a simple direct call, or - * ideally, patch an inline implementation into the callsite. (Direct - * calls are essentially free, because the call and return addresses - * are completely predictable.) - * - * For i386, these macros rely on the standard gcc "regparm(3)" calling - * convention, in which the first three arguments are placed in %eax, - * %edx, %ecx (in that order), and the remaining arguments are placed - * on the stack. All caller-save registers (eax,edx,ecx) are expected - * to be modified (either clobbered or used for return values). - * X86_64, on the other hand, already specifies a register-based calling - * conventions, returning at %rax, with parameteres going on %rdi, %rsi, - * %rdx, and %rcx. Note that for this reason, x86_64 does not need any - * special handling for dealing with 4 arguments, unlike i386. - * However, x86_64 also have to clobber all caller saved registers, which - * unfortunately, are quite a bit (r8 - r11) - * - * The call instruction itself is marked by placing its start address - * and size into the .parainstructions section, so that - * apply_paravirt() in arch/i386/kernel/alternative.c can do the - * appropriate patching under the control of the backend pv_init_ops - * implementation. - * - * Unfortunately there's no way to get gcc to generate the args setup - * for the call, and then allow the call itself to be generated by an - * inline asm. Because of this, we must do the complete arg setup and - * return value handling from within these macros. This is fairly - * cumbersome. - * - * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments. - * It could be extended to more arguments, but there would be little - * to be gained from that. For each number of arguments, there are - * the two VCALL and CALL variants for void and non-void functions. - * - * When there is a return value, the invoker of the macro must specify - * the return type. The macro then uses sizeof() on that type to - * determine whether its a 32 or 64 bit value, and places the return - * in the right register(s) (just %eax for 32-bit, and %edx:%eax for - * 64-bit). For x86_64 machines, it just returns at %rax regardless of - * the return value size. - * - * 64-bit arguments are passed as a pair of adjacent 32-bit arguments - * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments - * in low,high order - * - * Small structures are passed and returned in registers. The macro - * calling convention can't directly deal with this, so the wrapper - * functions must do this. - * - * These PVOP_* macros are only defined within this header. This - * means that all uses must be wrapped in inline functions. This also - * makes sure the incoming and outgoing types are always correct. - */ -#ifdef CONFIG_X86_32 -#define PVOP_VCALL_ARGS \ - unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx -#define PVOP_CALL_ARGS PVOP_VCALL_ARGS - -#define PVOP_CALL_ARG1(x) "a" ((unsigned long)(x)) -#define PVOP_CALL_ARG2(x) "d" ((unsigned long)(x)) -#define PVOP_CALL_ARG3(x) "c" ((unsigned long)(x)) - -#define PVOP_VCALL_CLOBBERS "=a" (__eax), "=d" (__edx), \ - "=c" (__ecx) -#define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS - -#define PVOP_VCALLEE_CLOBBERS "=a" (__eax), "=d" (__edx) -#define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS - -#define EXTRA_CLOBBERS -#define VEXTRA_CLOBBERS -#else /* CONFIG_X86_64 */ -#define PVOP_VCALL_ARGS \ - unsigned long __edi = __edi, __esi = __esi, \ - __edx = __edx, __ecx = __ecx -#define PVOP_CALL_ARGS PVOP_VCALL_ARGS, __eax - -#define PVOP_CALL_ARG1(x) "D" ((unsigned long)(x)) -#define PVOP_CALL_ARG2(x) "S" ((unsigned long)(x)) -#define PVOP_CALL_ARG3(x) "d" ((unsigned long)(x)) -#define PVOP_CALL_ARG4(x) "c" ((unsigned long)(x)) - -#define PVOP_VCALL_CLOBBERS "=D" (__edi), \ - "=S" (__esi), "=d" (__edx), \ - "=c" (__ecx) -#define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS, "=a" (__eax) - -#define PVOP_VCALLEE_CLOBBERS "=a" (__eax) -#define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS - -#define EXTRA_CLOBBERS , "r8", "r9", "r10", "r11" -#define VEXTRA_CLOBBERS , "rax", "r8", "r9", "r10", "r11" -#endif /* CONFIG_X86_32 */ - -#ifdef CONFIG_PARAVIRT_DEBUG -#define PVOP_TEST_NULL(op) BUG_ON(op == NULL) -#else -#define PVOP_TEST_NULL(op) ((void)op) -#endif - -#define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr, \ - pre, post, ...) \ - ({ \ - rettype __ret; \ - PVOP_CALL_ARGS; \ - PVOP_TEST_NULL(op); \ - /* This is 32-bit specific, but is okay in 64-bit */ \ - /* since this condition will never hold */ \ - if (sizeof(rettype) > sizeof(unsigned long)) { \ - asm volatile(pre \ - paravirt_alt(PARAVIRT_CALL) \ - post \ - : call_clbr \ - : paravirt_type(op), \ - paravirt_clobber(clbr), \ - ##__VA_ARGS__ \ - : "memory", "cc" extra_clbr); \ - __ret = (rettype)((((u64)__edx) << 32) | __eax); \ - } else { \ - asm volatile(pre \ - paravirt_alt(PARAVIRT_CALL) \ - post \ - : call_clbr \ - : paravirt_type(op), \ - paravirt_clobber(clbr), \ - ##__VA_ARGS__ \ - : "memory", "cc" extra_clbr); \ - __ret = (rettype)__eax; \ - } \ - __ret; \ - }) - -#define __PVOP_CALL(rettype, op, pre, post, ...) \ - ____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS, \ - EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__) - -#define __PVOP_CALLEESAVE(rettype, op, pre, post, ...) \ - ____PVOP_CALL(rettype, op.func, CLBR_RET_REG, \ - PVOP_CALLEE_CLOBBERS, , \ - pre, post, ##__VA_ARGS__) - - -#define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...) \ - ({ \ - PVOP_VCALL_ARGS; \ - PVOP_TEST_NULL(op); \ - asm volatile(pre \ - paravirt_alt(PARAVIRT_CALL) \ - post \ - : call_clbr \ - : paravirt_type(op), \ - paravirt_clobber(clbr), \ - ##__VA_ARGS__ \ - : "memory", "cc" extra_clbr); \ - }) - -#define __PVOP_VCALL(op, pre, post, ...) \ - ____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS, \ - VEXTRA_CLOBBERS, \ - pre, post, ##__VA_ARGS__) - -#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...) \ - ____PVOP_CALL(rettype, op.func, CLBR_RET_REG, \ - PVOP_VCALLEE_CLOBBERS, , \ - pre, post, ##__VA_ARGS__) - - - -#define PVOP_CALL0(rettype, op) \ - __PVOP_CALL(rettype, op, "", "") -#define PVOP_VCALL0(op) \ - __PVOP_VCALL(op, "", "") - -#define PVOP_CALLEE0(rettype, op) \ - __PVOP_CALLEESAVE(rettype, op, "", "") -#define PVOP_VCALLEE0(op) \ - __PVOP_VCALLEESAVE(op, "", "") - - -#define PVOP_CALL1(rettype, op, arg1) \ - __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1)) -#define PVOP_VCALL1(op, arg1) \ - __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1)) - -#define PVOP_CALLEE1(rettype, op, arg1) \ - __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1)) -#define PVOP_VCALLEE1(op, arg1) \ - __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1)) - - -#define PVOP_CALL2(rettype, op, arg1, arg2) \ - __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \ - PVOP_CALL_ARG2(arg2)) -#define PVOP_VCALL2(op, arg1, arg2) \ - __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1), \ - PVOP_CALL_ARG2(arg2)) - -#define PVOP_CALLEE2(rettype, op, arg1, arg2) \ - __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \ - PVOP_CALL_ARG2(arg2)) -#define PVOP_VCALLEE2(op, arg1, arg2) \ - __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1), \ - PVOP_CALL_ARG2(arg2)) - - -#define PVOP_CALL3(rettype, op, arg1, arg2, arg3) \ - __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \ - PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3)) -#define PVOP_VCALL3(op, arg1, arg2, arg3) \ - __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1), \ - PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3)) - -/* This is the only difference in x86_64. We can make it much simpler */ -#ifdef CONFIG_X86_32 -#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4) \ - __PVOP_CALL(rettype, op, \ - "push %[_arg4];", "lea 4(%%esp),%%esp;", \ - PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \ - PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4))) -#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4) \ - __PVOP_VCALL(op, \ - "push %[_arg4];", "lea 4(%%esp),%%esp;", \ - "0" ((u32)(arg1)), "1" ((u32)(arg2)), \ - "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4))) -#else -#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4) \ - __PVOP_CALL(rettype, op, "", "", \ - PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \ - PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4)) -#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4) \ - __PVOP_VCALL(op, "", "", \ - PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \ - PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4)) -#endif static inline int paravirt_enabled(void) { @@ -1393,20 +715,6 @@ static inline void pmd_clear(pmd_t *pmdp) } #endif /* CONFIG_X86_PAE */ -/* Lazy mode for batching updates / context switch */ -enum paravirt_lazy_mode { - PARAVIRT_LAZY_NONE, - PARAVIRT_LAZY_MMU, - PARAVIRT_LAZY_CPU, -}; - -enum paravirt_lazy_mode paravirt_get_lazy_mode(void); -void paravirt_start_context_switch(struct task_struct *prev); -void paravirt_end_context_switch(struct task_struct *next); - -void paravirt_enter_lazy_mmu(void); -void paravirt_leave_lazy_mmu(void); - #define __HAVE_ARCH_START_CONTEXT_SWITCH static inline void arch_start_context_switch(struct task_struct *prev) { @@ -1437,12 +745,6 @@ static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx, pv_mmu_ops.set_fixmap(idx, phys, flags); } -void _paravirt_nop(void); -u32 _paravirt_ident_32(u32); -u64 _paravirt_ident_64(u64); - -#define paravirt_nop ((void *)_paravirt_nop) - #if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS) static inline int __raw_spin_is_locked(struct raw_spinlock *lock) @@ -1479,17 +781,6 @@ static __always_inline void __raw_spin_unlock(struct raw_spinlock *lock) #endif -/* These all sit in the .parainstructions section to tell us what to patch. */ -struct paravirt_patch_site { - u8 *instr; /* original instructions */ - u8 instrtype; /* type of this instruction */ - u8 len; /* length of original instruction */ - u16 clobbers; /* what registers you may clobber */ -}; - -extern struct paravirt_patch_site __parainstructions[], - __parainstructions_end[]; - #ifdef CONFIG_X86_32 #define PV_SAVE_REGS "pushl %ecx; pushl %edx;" #define PV_RESTORE_REGS "popl %edx; popl %ecx;" diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h new file mode 100644 index 0000000..2b3371b --- /dev/null +++ b/arch/x86/include/asm/paravirt_types.h @@ -0,0 +1,720 @@ +#ifndef _ASM_X86_PARAVIRT_TYPES_H +#define _ASM_X86_PARAVIRT_TYPES_H + +/* Bitmask of what can be clobbered: usually at least eax. */ +#define CLBR_NONE 0 +#define CLBR_EAX (1 << 0) +#define CLBR_ECX (1 << 1) +#define CLBR_EDX (1 << 2) +#define CLBR_EDI (1 << 3) + +#ifdef CONFIG_X86_32 +/* CLBR_ANY should match all regs platform has. For i386, that's just it */ +#define CLBR_ANY ((1 << 4) - 1) + +#define CLBR_ARG_REGS (CLBR_EAX | CLBR_EDX | CLBR_ECX) +#define CLBR_RET_REG (CLBR_EAX | CLBR_EDX) +#define CLBR_SCRATCH (0) +#else +#define CLBR_RAX CLBR_EAX +#define CLBR_RCX CLBR_ECX +#define CLBR_RDX CLBR_EDX +#define CLBR_RDI CLBR_EDI +#define CLBR_RSI (1 << 4) +#define CLBR_R8 (1 << 5) +#define CLBR_R9 (1 << 6) +#define CLBR_R10 (1 << 7) +#define CLBR_R11 (1 << 8) + +#define CLBR_ANY ((1 << 9) - 1) + +#define CLBR_ARG_REGS (CLBR_RDI | CLBR_RSI | CLBR_RDX | \ + CLBR_RCX | CLBR_R8 | CLBR_R9) +#define CLBR_RET_REG (CLBR_RAX) +#define CLBR_SCRATCH (CLBR_R10 | CLBR_R11) + +#endif /* X86_64 */ + +#define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG) + +#ifndef __ASSEMBLY__ + +#include <asm/desc_defs.h> +#include <asm/kmap_types.h> + +struct page; +struct thread_struct; +struct desc_ptr; +struct tss_struct; +struct mm_struct; +struct desc_struct; +struct task_struct; +struct cpumask; + +/* + * Wrapper type for pointers to code which uses the non-standard + * calling convention. See PV_CALL_SAVE_REGS_THUNK below. + */ +struct paravirt_callee_save { + void *func; +}; + +/* general info */ +struct pv_info { + unsigned int kernel_rpl; + int shared_kernel_pmd; + int paravirt_enabled; + const char *name; +}; + +struct pv_init_ops { + /* + * Patch may replace one of the defined code sequences with + * arbitrary code, subject to the same register constraints. + * This generally means the code is not free to clobber any + * registers other than EAX. The patch function should return + * the number of bytes of code generated, as we nop pad the + * rest in generic code. + */ + unsigned (*patch)(u8 type, u16 clobber, void *insnbuf, + unsigned long addr, unsigned len); + + /* Basic arch-specific setup */ + void (*arch_setup)(void); + char *(*memory_setup)(void); + void (*post_allocator_init)(void); + + /* Print a banner to identify the environment */ + void (*banner)(void); +}; + + +struct pv_lazy_ops { + /* Set deferred update mode, used for batching operations. */ + void (*enter)(void); + void (*leave)(void); +}; + +struct pv_time_ops { + void (*time_init)(void); + + /* Set and set time of day */ + unsigned long (*get_wallclock)(void); + int (*set_wallclock)(unsigned long); + + unsigned long long (*sched_clock)(void); + unsigned long (*get_tsc_khz)(void); +}; + +struct pv_cpu_ops { + /* hooks for various privileged instructions */ + unsigned long (*get_debugreg)(int regno); + void (*set_debugreg)(int regno, unsigned long value); + + void (*clts)(void); + + unsigned long (*read_cr0)(void); + void (*write_cr0)(unsigned long); + + unsigned long (*read_cr4_safe)(void); + unsigned long (*read_cr4)(void); + void (*write_cr4)(unsigned long); + +#ifdef CONFIG_X86_64 + unsigned long (*read_cr8)(void); + void (*write_cr8)(unsigned long); +#endif + + /* Segment descriptor handling */ + void (*load_tr_desc)(void); + void (*load_gdt)(const struct desc_ptr *); + void (*load_idt)(const struct desc_ptr *); + void (*store_gdt)(struct desc_ptr *); + void (*store_idt)(struct desc_ptr *); + void (*set_ldt)(const void *desc, unsigned entries); + unsigned long (*store_tr)(void); + void (*load_tls)(struct thread_struct *t, unsigned int cpu); +#ifdef CONFIG_X86_64 + void (*load_gs_index)(unsigned int idx); +#endif + void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum, + const void *desc); + void (*write_gdt_entry)(struct desc_struct *, + int entrynum, const void *desc, int size); + void (*write_idt_entry)(gate_desc *, + int entrynum, const gate_desc *gate); + void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries); + void (*free_ldt)(struct desc_struct *ldt, unsigned entries); + + void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t); + + void (*set_iopl_mask)(unsigned mask); + + void (*wbinvd)(void); + void (*io_delay)(void); + + /* cpuid emulation, mostly so that caps bits can be disabled */ + void (*cpuid)(unsigned int *eax, unsigned int *ebx, + unsigned int *ecx, unsigned int *edx); + + /* MSR, PMC and TSR operations. + err = 0/-EFAULT. wrmsr returns 0/-EFAULT. */ + u64 (*read_msr_amd)(unsigned int msr, int *err); + u64 (*read_msr)(unsigned int msr, int *err); + int (*write_msr)(unsigned int msr, unsigned low, unsigned high); + + u64 (*read_tsc)(void); + u64 (*read_pmc)(int counter); + unsigned long long (*read_tscp)(unsigned int *aux); + + /* + * Atomically enable interrupts and return to userspace. This + * is only ever used to return to 32-bit processes; in a + * 64-bit kernel, it's used for 32-on-64 compat processes, but + * never native 64-bit processes. (Jump, not call.) + */ + void (*irq_enable_sysexit)(void); + + /* + * Switch to usermode gs and return to 64-bit usermode using + * sysret. Only used in 64-bit kernels to return to 64-bit + * processes. Usermode register state, including %rsp, must + * already be restored. + */ + void (*usergs_sysret64)(void); + + /* + * Switch to usermode gs and return to 32-bit usermode using + * sysret. Used to return to 32-on-64 compat processes. + * Other usermode register state, including %esp, must already + * be restored. + */ + void (*usergs_sysret32)(void); + + /* Normal iret. Jump to this with the standard iret stack + frame set up. */ + void (*iret)(void); + + void (*swapgs)(void); + + void (*start_context_switch)(struct task_struct *prev); + void (*end_context_switch)(struct task_struct *next); +}; + +struct pv_irq_ops { + void (*init_IRQ)(void); + + /* + * Get/set interrupt state. save_fl and restore_fl are only + * expected to use X86_EFLAGS_IF; all other bits + * returned from save_fl are undefined, and may be ignored by + * restore_fl. + * + * NOTE: These functions callers expect the callee to preserve + * more registers than the standard C calling convention. + */ + struct paravirt_callee_save save_fl; + struct paravirt_callee_save restore_fl; + struct paravirt_callee_save irq_disable; + struct paravirt_callee_save irq_enable; + + void (*safe_halt)(void); + void (*halt)(void); + +#ifdef CONFIG_X86_64 + void (*adjust_exception_frame)(void); +#endif +}; + +struct pv_apic_ops { +#ifdef CONFIG_X86_LOCAL_APIC + void (*setup_boot_clock)(void); + void (*setup_secondary_clock)(void); + + void (*startup_ipi_hook)(int phys_apicid, + unsigned long start_eip, + unsigned long start_esp); +#endif +}; + +struct pv_mmu_ops { + /* + * Called before/after init_mm pagetable setup. setup_start + * may reset %cr3, and may pre-install parts of the pagetable; + * pagetable setup is expected to preserve any existing + * mapping. + */ + void (*pagetable_setup_start)(pgd_t *pgd_base); + void (*pagetable_setup_done)(pgd_t *pgd_base); + + unsigned long (*read_cr2)(void); + void (*write_cr2)(unsigned long); + + unsigned long (*read_cr3)(void); + void (*write_cr3)(unsigned long); + + /* + * Hooks for intercepting the creation/use/destruction of an + * mm_struct. + */ + void (*activate_mm)(struct mm_struct *prev, + struct mm_struct *next); + void (*dup_mmap)(struct mm_struct *oldmm, + struct mm_struct *mm); + void (*exit_mmap)(struct mm_struct *mm); + + + /* TLB operations */ + void (*flush_tlb_user)(void); + void (*flush_tlb_kernel)(void); + void (*flush_tlb_single)(unsigned long addr); + void (*flush_tlb_others)(const struct cpumask *cpus, + struct mm_struct *mm, + unsigned long va); + + /* Hooks for allocating and freeing a pagetable top-level */ + int (*pgd_alloc)(struct mm_struct *mm); + void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd); + + /* + * Hooks for allocating/releasing pagetable pages when they're + * attached to a pagetable + */ + void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn); + void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn); + void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count); + void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn); + void (*release_pte)(unsigned long pfn); + void (*release_pmd)(unsigned long pfn); + void (*release_pud)(unsigned long pfn); + + /* Pagetable manipulation functions */ + void (*set_pte)(pte_t *ptep, pte_t pteval); + void (*set_pte_at)(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pteval); + void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval); + void (*pte_update)(struct mm_struct *mm, unsigned long addr, + pte_t *ptep); + void (*pte_update_defer)(struct mm_struct *mm, + unsigned long addr, pte_t *ptep); + + pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr, + pte_t *ptep); + void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte); + + struct paravirt_callee_save pte_val; + struct paravirt_callee_save make_pte; + + struct paravirt_callee_save pgd_val; + struct paravirt_callee_save make_pgd; + +#if PAGETABLE_LEVELS >= 3 +#ifdef CONFIG_X86_PAE + void (*set_pte_atomic)(pte_t *ptep, pte_t pteval); + void (*pte_clear)(struct mm_struct *mm, unsigned long addr, + pte_t *ptep); + void (*pmd_clear)(pmd_t *pmdp); + +#endif /* CONFIG_X86_PAE */ + + void (*set_pud)(pud_t *pudp, pud_t pudval); + + struct paravirt_callee_save pmd_val; + struct paravirt_callee_save make_pmd; + +#if PAGETABLE_LEVELS == 4 + struct paravirt_callee_save pud_val; + struct paravirt_callee_save make_pud; + + void (*set_pgd)(pgd_t *pudp, pgd_t pgdval); +#endif /* PAGETABLE_LEVELS == 4 */ +#endif /* PAGETABLE_LEVELS >= 3 */ + +#ifdef CONFIG_HIGHPTE + void *(*kmap_atomic_pte)(struct page *page, enum km_type type); +#endif + + struct pv_lazy_ops lazy_mode; + + /* dom0 ops */ + + /* Sometimes the physical address is a pfn, and sometimes its + an mfn. We can tell which is which from the index. */ + void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx, + phys_addr_t phys, pgprot_t flags); +}; + +struct raw_spinlock; +struct pv_lock_ops { + int (*spin_is_locked)(struct raw_spinlock *lock); + int (*spin_is_contended)(struct raw_spinlock *lock); + void (*spin_lock)(struct raw_spinlock *lock); + void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags); + int (*spin_trylock)(struct raw_spinlock *lock); + void (*spin_unlock)(struct raw_spinlock *lock); +}; + +/* This contains all the paravirt structures: we get a convenient + * number for each function using the offset which we use to indicate + * what to patch. */ +struct paravirt_patch_template { + struct pv_init_ops pv_init_ops; + struct pv_time_ops pv_time_ops; + struct pv_cpu_ops pv_cpu_ops; + struct pv_irq_ops pv_irq_ops; + struct pv_apic_ops pv_apic_ops; + struct pv_mmu_ops pv_mmu_ops; + struct pv_lock_ops pv_lock_ops; +}; + +extern struct pv_info pv_info; +extern struct pv_init_ops pv_init_ops; +extern struct pv_time_ops pv_time_ops; +extern struct pv_cpu_ops pv_cpu_ops; +extern struct pv_irq_ops pv_irq_ops; +extern struct pv_apic_ops pv_apic_ops; +extern struct pv_mmu_ops pv_mmu_ops; +extern struct pv_lock_ops pv_lock_ops; + +#define PARAVIRT_PATCH(x) \ + (offsetof(struct paravirt_patch_template, x) / sizeof(void *)) + +#define paravirt_type(op) \ + [paravirt_typenum] "i" (PARAVIRT_PATCH(op)), \ + [paravirt_opptr] "i" (&(op)) +#define paravirt_clobber(clobber) \ + [paravirt_clobber] "i" (clobber) + +/* + * Generate some code, and mark it as patchable by the + * apply_paravirt() alternate instruction patcher. + */ +#define _paravirt_alt(insn_string, type, clobber) \ + "771:\n\t" insn_string "\n" "772:\n" \ + ".pushsection .parainstructions,\"a\"\n" \ + _ASM_ALIGN "\n" \ + _ASM_PTR " 771b\n" \ + " .byte " type "\n" \ + " .byte 772b-771b\n" \ + " .short " clobber "\n" \ + ".popsection\n" + +/* Generate patchable code, with the default asm parameters. */ +#define paravirt_alt(insn_string) \ + _paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]") + +/* Simple instruction patching code. */ +#define DEF_NATIVE(ops, name, code) \ + extern const char start_##ops##_##name[], end_##ops##_##name[]; \ + asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":") + +unsigned paravirt_patch_nop(void); +unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len); +unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len); +unsigned paravirt_patch_ignore(unsigned len); +unsigned paravirt_patch_call(void *insnbuf, + const void *target, u16 tgt_clobbers, + unsigned long addr, u16 site_clobbers, + unsigned len); +unsigned paravirt_patch_jmp(void *insnbuf, const void *target, + unsigned long addr, unsigned len); +unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf, + unsigned long addr, unsigned len); + +unsigned paravirt_patch_insns(void *insnbuf, unsigned len, + const char *start, const char *end); + +unsigned native_patch(u8 type, u16 clobbers, void *ibuf, + unsigned long addr, unsigned len); + +int paravirt_disable_iospace(void); + +/* + * This generates an indirect call based on the operation type number. + * The type number, computed in PARAVIRT_PATCH, is derived from the + * offset into the paravirt_patch_template structure, and can therefore be + * freely converted back into a structure offset. + */ +#define PARAVIRT_CALL "call *%c[paravirt_opptr];" + +/* + * These macros are intended to wrap calls through one of the paravirt + * ops structs, so that they can be later identified and patched at + * runtime. + * + * Normally, a call to a pv_op function is a simple indirect call: + * (pv_op_struct.operations)(args...). + * + * Unfortunately, this is a relatively slow operation for modern CPUs, + * because it cannot necessarily determine what the destination + * address is. In this case, the address is a runtime constant, so at + * the very least we can patch the call to e a simple direct call, or + * ideally, patch an inline implementation into the callsite. (Direct + * calls are essentially free, because the call and return addresses + * are completely predictable.) + * + * For i386, these macros rely on the standard gcc "regparm(3)" calling + * convention, in which the first three arguments are placed in %eax, + * %edx, %ecx (in that order), and the remaining arguments are placed + * on the stack. All caller-save registers (eax,edx,ecx) are expected + * to be modified (either clobbered or used for return values). + * X86_64, on the other hand, already specifies a register-based calling + * conventions, returning at %rax, with parameteres going on %rdi, %rsi, + * %rdx, and %rcx. Note that for this reason, x86_64 does not need any + * special handling for dealing with 4 arguments, unlike i386. + * However, x86_64 also have to clobber all caller saved registers, which + * unfortunately, are quite a bit (r8 - r11) + * + * The call instruction itself is marked by placing its start address + * and size into the .parainstructions section, so that + * apply_paravirt() in arch/i386/kernel/alternative.c can do the + * appropriate patching under the control of the backend pv_init_ops + * implementation. + * + * Unfortunately there's no way to get gcc to generate the args setup + * for the call, and then allow the call itself to be generated by an + * inline asm. Because of this, we must do the complete arg setup and + * return value handling from within these macros. This is fairly + * cumbersome. + * + * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments. + * It could be extended to more arguments, but there would be little + * to be gained from that. For each number of arguments, there are + * the two VCALL and CALL variants for void and non-void functions. + * + * When there is a return value, the invoker of the macro must specify + * the return type. The macro then uses sizeof() on that type to + * determine whether its a 32 or 64 bit value, and places the return + * in the right register(s) (just %eax for 32-bit, and %edx:%eax for + * 64-bit). For x86_64 machines, it just returns at %rax regardless of + * the return value size. + * + * 64-bit arguments are passed as a pair of adjacent 32-bit arguments + * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments + * in low,high order + * + * Small structures are passed and returned in registers. The macro + * calling convention can't directly deal with this, so the wrapper + * functions must do this. + * + * These PVOP_* macros are only defined within this header. This + * means that all uses must be wrapped in inline functions. This also + * makes sure the incoming and outgoing types are always correct. + */ +#ifdef CONFIG_X86_32 +#define PVOP_VCALL_ARGS \ + unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx +#define PVOP_CALL_ARGS PVOP_VCALL_ARGS + +#define PVOP_CALL_ARG1(x) "a" ((unsigned long)(x)) +#define PVOP_CALL_ARG2(x) "d" ((unsigned long)(x)) +#define PVOP_CALL_ARG3(x) "c" ((unsigned long)(x)) + +#define PVOP_VCALL_CLOBBERS "=a" (__eax), "=d" (__edx), \ + "=c" (__ecx) +#define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS + +#define PVOP_VCALLEE_CLOBBERS "=a" (__eax), "=d" (__edx) +#define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS + +#define EXTRA_CLOBBERS +#define VEXTRA_CLOBBERS +#else /* CONFIG_X86_64 */ +#define PVOP_VCALL_ARGS \ + unsigned long __edi = __edi, __esi = __esi, \ + __edx = __edx, __ecx = __ecx +#define PVOP_CALL_ARGS PVOP_VCALL_ARGS, __eax + +#define PVOP_CALL_ARG1(x) "D" ((unsigned long)(x)) +#define PVOP_CALL_ARG2(x) "S" ((unsigned long)(x)) +#define PVOP_CALL_ARG3(x) "d" ((unsigned long)(x)) +#define PVOP_CALL_ARG4(x) "c" ((unsigned long)(x)) + +#define PVOP_VCALL_CLOBBERS "=D" (__edi), \ + "=S" (__esi), "=d" (__edx), \ + "=c" (__ecx) +#define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS, "=a" (__eax) + +#define PVOP_VCALLEE_CLOBBERS "=a" (__eax) +#define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS + +#define EXTRA_CLOBBERS , "r8", "r9", "r10", "r11" +#define VEXTRA_CLOBBERS , "rax", "r8", "r9", "r10", "r11" +#endif /* CONFIG_X86_32 */ + +#ifdef CONFIG_PARAVIRT_DEBUG +#define PVOP_TEST_NULL(op) BUG_ON(op == NULL) +#else +#define PVOP_TEST_NULL(op) ((void)op) +#endif + +#define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr, \ + pre, post, ...) \ + ({ \ + rettype __ret; \ + PVOP_CALL_ARGS; \ + PVOP_TEST_NULL(op); \ + /* This is 32-bit specific, but is okay in 64-bit */ \ + /* since this condition will never hold */ \ + if (sizeof(rettype) > sizeof(unsigned long)) { \ + asm volatile(pre \ + paravirt_alt(PARAVIRT_CALL) \ + post \ + : call_clbr \ + : paravirt_type(op), \ + paravirt_clobber(clbr), \ + ##__VA_ARGS__ \ + : "memory", "cc" extra_clbr); \ + __ret = (rettype)((((u64)__edx) << 32) | __eax); \ + } else { \ + asm volatile(pre \ + paravirt_alt(PARAVIRT_CALL) \ + post \ + : call_clbr \ + : paravirt_type(op), \ + paravirt_clobber(clbr), \ + ##__VA_ARGS__ \ + : "memory", "cc" extra_clbr); \ + __ret = (rettype)__eax; \ + } \ + __ret; \ + }) + +#define __PVOP_CALL(rettype, op, pre, post, ...) \ + ____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS, \ + EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__) + +#define __PVOP_CALLEESAVE(rettype, op, pre, post, ...) \ + ____PVOP_CALL(rettype, op.func, CLBR_RET_REG, \ + PVOP_CALLEE_CLOBBERS, , \ + pre, post, ##__VA_ARGS__) + + +#define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...) \ + ({ \ + PVOP_VCALL_ARGS; \ + PVOP_TEST_NULL(op); \ + asm volatile(pre \ + paravirt_alt(PARAVIRT_CALL) \ + post \ + : call_clbr \ + : paravirt_type(op), \ + paravirt_clobber(clbr), \ + ##__VA_ARGS__ \ + : "memory", "cc" extra_clbr); \ + }) + +#define __PVOP_VCALL(op, pre, post, ...) \ + ____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS, \ + VEXTRA_CLOBBERS, \ + pre, post, ##__VA_ARGS__) + +#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...) \ + ____PVOP_CALL(rettype, op.func, CLBR_RET_REG, \ + PVOP_VCALLEE_CLOBBERS, , \ + pre, post, ##__VA_ARGS__) + + + +#define PVOP_CALL0(rettype, op) \ + __PVOP_CALL(rettype, op, "", "") +#define PVOP_VCALL0(op) \ + __PVOP_VCALL(op, "", "") + +#define PVOP_CALLEE0(rettype, op) \ + __PVOP_CALLEESAVE(rettype, op, "", "") +#define PVOP_VCALLEE0(op) \ + __PVOP_VCALLEESAVE(op, "", "") + + +#define PVOP_CALL1(rettype, op, arg1) \ + __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1)) +#define PVOP_VCALL1(op, arg1) \ + __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1)) + +#define PVOP_CALLEE1(rettype, op, arg1) \ + __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1)) +#define PVOP_VCALLEE1(op, arg1) \ + __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1)) + + +#define PVOP_CALL2(rettype, op, arg1, arg2) \ + __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \ + PVOP_CALL_ARG2(arg2)) +#define PVOP_VCALL2(op, arg1, arg2) \ + __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1), \ + PVOP_CALL_ARG2(arg2)) + +#define PVOP_CALLEE2(rettype, op, arg1, arg2) \ + __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \ + PVOP_CALL_ARG2(arg2)) +#define PVOP_VCALLEE2(op, arg1, arg2) \ + __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1), \ + PVOP_CALL_ARG2(arg2)) + + +#define PVOP_CALL3(rettype, op, arg1, arg2, arg3) \ + __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1), \ + PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3)) +#define PVOP_VCALL3(op, arg1, arg2, arg3) \ + __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1), \ + PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3)) + +/* This is the only difference in x86_64. We can make it much simpler */ +#ifdef CONFIG_X86_32 +#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4) \ + __PVOP_CALL(rettype, op, \ + "push %[_arg4];", "lea 4(%%esp),%%esp;", \ + PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \ + PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4))) +#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4) \ + __PVOP_VCALL(op, \ + "push %[_arg4];", "lea 4(%%esp),%%esp;", \ + "0" ((u32)(arg1)), "1" ((u32)(arg2)), \ + "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4))) +#else +#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4) \ + __PVOP_CALL(rettype, op, "", "", \ + PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \ + PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4)) +#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4) \ + __PVOP_VCALL(op, "", "", \ + PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2), \ + PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4)) +#endif + +/* Lazy mode for batching updates / context switch */ +enum paravirt_lazy_mode { + PARAVIRT_LAZY_NONE, + PARAVIRT_LAZY_MMU, + PARAVIRT_LAZY_CPU, +}; + +enum paravirt_lazy_mode paravirt_get_lazy_mode(void); +void paravirt_start_context_switch(struct task_struct *prev); +void paravirt_end_context_switch(struct task_struct *next); + +void paravirt_enter_lazy_mmu(void); +void paravirt_leave_lazy_mmu(void); + +void _paravirt_nop(void); +u32 _paravirt_ident_32(u32); +u64 _paravirt_ident_64(u64); + +#define paravirt_nop ((void *)_paravirt_nop) + +/* These all sit in the .parainstructions section to tell us what to patch. */ +struct paravirt_patch_site { + u8 *instr; /* original instructions */ + u8 instrtype; /* type of this instruction */ + u8 len; /* length of original instruction */ + u16 clobbers; /* what registers you may clobber */ +}; + +extern struct paravirt_patch_site __parainstructions[], + __parainstructions_end[]; + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_X86_PARAVIRT_TYPES_H */ |