Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 core updates from Ingo Molnar:
 "There were so many changes in the x86/asm, x86/apic and x86/mm topics
  in this cycle that the topical separation of -tip broke down somewhat -
  so the result is a more traditional architecture pull request,
  collected into the 'x86/core' topic.

  The topics were still maintained separately as far as possible, so
  bisectability and conceptual separation should still be pretty good -
  but there were a handful of merge points to avoid excessive
  dependencies (and conflicts) that would have been poorly tested in the
  end.

  The next cycle will hopefully be much more quiet (or at least will
  have fewer dependencies).

  The main changes in this cycle were:

   * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
     Gleixner)

     - This is the second and most intrusive part of changes to the x86
       interrupt handling - full conversion to hierarchical interrupt
       domains:

          [IOAPIC domain]   -----
                                 |
          [MSI domain]      --------[Remapping domain] ----- [ Vector domain ]
                                 |   (optional)          |
          [HPET MSI domain] -----                        |
                                                         |
          [DMAR domain]     -----------------------------
                                                         |
          [Legacy domain]   -----------------------------

       This now reflects the actual hardware and allowed us to distangle
       the domain specific code from the underlying parent domain, which
       can be optional in the case of interrupt remapping.  It's a clear
       separation of functionality and removes quite some duct tape
       constructs which plugged the remap code between ioapic/msi/hpet
       and the vector management.

     - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
       injection into guests (Feng Wu)

   * x86/asm changes:

     - Tons of cleanups and small speedups, micro-optimizations.  This
       is in preparation to move a good chunk of the low level entry
       code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
       Brian Gerst)

     - Moved all system entry related code to a new home under
       arch/x86/entry/ (Ingo Molnar)

     - Removal of the fragile and ugly CFI dwarf debuginfo annotations.
       Conversion to C will reintroduce many of them - but meanwhile
       they are only getting in the way, and the upstream kernel does
       not rely on them (Ingo Molnar)

     - NOP handling refinements. (Borislav Petkov)

   * x86/mm changes:

     - Big PAT and MTRR rework: making the code more robust and
       preparing to phase out exposing direct MTRR interfaces to drivers -
       in favor of using PAT driven interfaces (Toshi Kani, Luis R
       Rodriguez, Borislav Petkov)

     - New ioremap_wt()/set_memory_wt() interfaces to support
       Write-Through cached memory mappings.  This is especially
       important for good performance on NVDIMM hardware (Toshi Kani)

   * x86/ras changes:

     - Add support for deferred errors on AMD (Aravind Gopalakrishnan)

       This is an important RAS feature which adds hardware support for
       poisoned data.  That means roughly that the hardware marks data
       which it has detected as corrupted but wasn't able to correct, as
       poisoned data and raises an APIC interrupt to signal that in the
       form of a deferred error.  It is the OS's responsibility then to
       take proper recovery action and thus prolonge system lifetime as
       far as possible.

     - Add support for Intel "Local MCE"s: upcoming CPUs will support
       CPU-local MCE interrupts, as opposed to the traditional system-
       wide broadcasted MCE interrupts (Ashok Raj)

     - Misc cleanups (Borislav Petkov)

   * x86/platform changes:

     - Intel Atom SoC updates

  ... and lots of other cleanups, fixlets and other changes - see the
  shortlog and the Git log for details"

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
  x86/hpet: Use proper hpet device number for MSI allocation
  x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
  x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
  x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
  x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  iommu, x86: Properly handle posted interrupts for IOMMU hotplug
  iommu, x86: Provide irq_remapping_cap() interface
  iommu, x86: Setup Posted-Interrupts capability for Intel iommu
  iommu, x86: Add cap_pi_support() to detect VT-d PI capability
  iommu, x86: Avoid migrating VT-d posted interrupts
  iommu, x86: Save the mode (posted or remapped) of an IRTE
  iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
  iommu: dmar: Provide helper to copy shared irte fields
  iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
  iommu: Add new member capability to struct irq_remap_ops
  x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
  x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
  x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
  ...

1 files changed, 0 insertions, 170 deletions

diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
deleted file mode 100644
index de1cdaf..0000000
--- a/arch/x86/include/asm/dwarf2.h
+++ /dev/null
@@ -1,170 +0,0 @@
-#ifndef _ASM_X86_DWARF2_H
-#define _ASM_X86_DWARF2_H
-
-#ifndef __ASSEMBLY__
-#warning "asm/dwarf2.h should be only included in pure assembly files"
-#endif
-
-/*
- * Macros for dwarf2 CFI unwind table entries.
- * See "as.info" for details on these pseudo ops. Unfortunately
- * they are only supported in very new binutils, so define them
- * away for older version.
- */
-
-#ifdef CONFIG_AS_CFI
-
-#define CFI_STARTPROC		.cfi_startproc
-#define CFI_ENDPROC		.cfi_endproc
-#define CFI_DEF_CFA		.cfi_def_cfa
-#define CFI_DEF_CFA_REGISTER	.cfi_def_cfa_register
-#define CFI_DEF_CFA_OFFSET	.cfi_def_cfa_offset
-#define CFI_ADJUST_CFA_OFFSET	.cfi_adjust_cfa_offset
-#define CFI_OFFSET		.cfi_offset
-#define CFI_REL_OFFSET		.cfi_rel_offset
-#define CFI_REGISTER		.cfi_register
-#define CFI_RESTORE		.cfi_restore
-#define CFI_REMEMBER_STATE	.cfi_remember_state
-#define CFI_RESTORE_STATE	.cfi_restore_state
-#define CFI_UNDEFINED		.cfi_undefined
-#define CFI_ESCAPE		.cfi_escape
-
-#ifdef CONFIG_AS_CFI_SIGNAL_FRAME
-#define CFI_SIGNAL_FRAME	.cfi_signal_frame
-#else
-#define CFI_SIGNAL_FRAME
-#endif
-
-#if defined(CONFIG_AS_CFI_SECTIONS) && defined(__ASSEMBLY__)
-	/*
-	 * Emit CFI data in .debug_frame sections, not .eh_frame sections.
-	 * The latter we currently just discard since we don't do DWARF
-	 * unwinding at runtime.  So only the offline DWARF information is
-	 * useful to anyone.  Note we should not use this directive if this
-	 * file is used in the vDSO assembly, or if vmlinux.lds.S gets
-	 * changed so it doesn't discard .eh_frame.
-	 */
-	.cfi_sections .debug_frame
-#endif
-
-#else
-
-/*
- * Due to the structure of pre-exisiting code, don't use assembler line
- * comment character # to ignore the arguments. Instead, use a dummy macro.
- */
-.macro cfi_ignore a=0, b=0, c=0, d=0
-.endm
-
-#define CFI_STARTPROC		cfi_ignore
-#define CFI_ENDPROC		cfi_ignore
-#define CFI_DEF_CFA		cfi_ignore
-#define CFI_DEF_CFA_REGISTER	cfi_ignore
-#define CFI_DEF_CFA_OFFSET	cfi_ignore
-#define CFI_ADJUST_CFA_OFFSET	cfi_ignore
-#define CFI_OFFSET		cfi_ignore
-#define CFI_REL_OFFSET		cfi_ignore
-#define CFI_REGISTER		cfi_ignore
-#define CFI_RESTORE		cfi_ignore
-#define CFI_REMEMBER_STATE	cfi_ignore
-#define CFI_RESTORE_STATE	cfi_ignore
-#define CFI_UNDEFINED		cfi_ignore
-#define CFI_ESCAPE		cfi_ignore
-#define CFI_SIGNAL_FRAME	cfi_ignore
-
-#endif
-
-/*
- * An attempt to make CFI annotations more or less
- * correct and shorter. It is implied that you know
- * what you're doing if you use them.
- */
-#ifdef __ASSEMBLY__
-#ifdef CONFIG_X86_64
-	.macro pushq_cfi reg
-	pushq \reg
-	CFI_ADJUST_CFA_OFFSET 8
-	.endm
-
-	.macro pushq_cfi_reg reg
-	pushq %\reg
-	CFI_ADJUST_CFA_OFFSET 8
-	CFI_REL_OFFSET \reg, 0
-	.endm
-
-	.macro popq_cfi reg
-	popq \reg
-	CFI_ADJUST_CFA_OFFSET -8
-	.endm
-
-	.macro popq_cfi_reg reg
-	popq %\reg
-	CFI_ADJUST_CFA_OFFSET -8
-	CFI_RESTORE \reg
-	.endm
-
-	.macro pushfq_cfi
-	pushfq
-	CFI_ADJUST_CFA_OFFSET 8
-	.endm
-
-	.macro popfq_cfi
-	popfq
-	CFI_ADJUST_CFA_OFFSET -8
-	.endm
-
-	.macro movq_cfi reg offset=0
-	movq %\reg, \offset(%rsp)
-	CFI_REL_OFFSET \reg, \offset
-	.endm
-
-	.macro movq_cfi_restore offset reg
-	movq \offset(%rsp), %\reg
-	CFI_RESTORE \reg
-	.endm
-#else /*!CONFIG_X86_64*/
-	.macro pushl_cfi reg
-	pushl \reg
-	CFI_ADJUST_CFA_OFFSET 4
-	.endm
-
-	.macro pushl_cfi_reg reg
-	pushl %\reg
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET \reg, 0
-	.endm
-
-	.macro popl_cfi reg
-	popl \reg
-	CFI_ADJUST_CFA_OFFSET -4
-	.endm
-
-	.macro popl_cfi_reg reg
-	popl %\reg
-	CFI_ADJUST_CFA_OFFSET -4
-	CFI_RESTORE \reg
-	.endm
-
-	.macro pushfl_cfi
-	pushfl
-	CFI_ADJUST_CFA_OFFSET 4
-	.endm
-
-	.macro popfl_cfi
-	popfl
-	CFI_ADJUST_CFA_OFFSET -4
-	.endm
-
-	.macro movl_cfi reg offset=0
-	movl %\reg, \offset(%esp)
-	CFI_REL_OFFSET \reg, \offset
-	.endm
-
-	.macro movl_cfi_restore offset reg
-	movl \offset(%esp), %\reg
-	CFI_RESTORE \reg
-	.endm
-#endif /*!CONFIG_X86_64*/
-#endif /*__ASSEMBLY__*/
-
-#endif /* _ASM_X86_DWARF2_H */