Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 core updates from Ingo Molnar:
 "There were so many changes in the x86/asm, x86/apic and x86/mm topics
  in this cycle that the topical separation of -tip broke down somewhat -
  so the result is a more traditional architecture pull request,
  collected into the 'x86/core' topic.

  The topics were still maintained separately as far as possible, so
  bisectability and conceptual separation should still be pretty good -
  but there were a handful of merge points to avoid excessive
  dependencies (and conflicts) that would have been poorly tested in the
  end.

  The next cycle will hopefully be much more quiet (or at least will
  have fewer dependencies).

  The main changes in this cycle were:

   * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
     Gleixner)

     - This is the second and most intrusive part of changes to the x86
       interrupt handling - full conversion to hierarchical interrupt
       domains:

          [IOAPIC domain]   -----
                                 |
          [MSI domain]      --------[Remapping domain] ----- [ Vector domain ]
                                 |   (optional)          |
          [HPET MSI domain] -----                        |
                                                         |
          [DMAR domain]     -----------------------------
                                                         |
          [Legacy domain]   -----------------------------

       This now reflects the actual hardware and allowed us to distangle
       the domain specific code from the underlying parent domain, which
       can be optional in the case of interrupt remapping.  It's a clear
       separation of functionality and removes quite some duct tape
       constructs which plugged the remap code between ioapic/msi/hpet
       and the vector management.

     - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
       injection into guests (Feng Wu)

   * x86/asm changes:

     - Tons of cleanups and small speedups, micro-optimizations.  This
       is in preparation to move a good chunk of the low level entry
       code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
       Brian Gerst)

     - Moved all system entry related code to a new home under
       arch/x86/entry/ (Ingo Molnar)

     - Removal of the fragile and ugly CFI dwarf debuginfo annotations.
       Conversion to C will reintroduce many of them - but meanwhile
       they are only getting in the way, and the upstream kernel does
       not rely on them (Ingo Molnar)

     - NOP handling refinements. (Borislav Petkov)

   * x86/mm changes:

     - Big PAT and MTRR rework: making the code more robust and
       preparing to phase out exposing direct MTRR interfaces to drivers -
       in favor of using PAT driven interfaces (Toshi Kani, Luis R
       Rodriguez, Borislav Petkov)

     - New ioremap_wt()/set_memory_wt() interfaces to support
       Write-Through cached memory mappings.  This is especially
       important for good performance on NVDIMM hardware (Toshi Kani)

   * x86/ras changes:

     - Add support for deferred errors on AMD (Aravind Gopalakrishnan)

       This is an important RAS feature which adds hardware support for
       poisoned data.  That means roughly that the hardware marks data
       which it has detected as corrupted but wasn't able to correct, as
       poisoned data and raises an APIC interrupt to signal that in the
       form of a deferred error.  It is the OS's responsibility then to
       take proper recovery action and thus prolonge system lifetime as
       far as possible.

     - Add support for Intel "Local MCE"s: upcoming CPUs will support
       CPU-local MCE interrupts, as opposed to the traditional system-
       wide broadcasted MCE interrupts (Ashok Raj)

     - Misc cleanups (Borislav Petkov)

   * x86/platform changes:

     - Intel Atom SoC updates

  ... and lots of other cleanups, fixlets and other changes - see the
  shortlog and the Git log for details"

* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
  x86/hpet: Use proper hpet device number for MSI allocation
  x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
  x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
  x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
  x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
  genirq: Prevent crash in irq_move_irq()
  genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
  iommu, x86: Properly handle posted interrupts for IOMMU hotplug
  iommu, x86: Provide irq_remapping_cap() interface
  iommu, x86: Setup Posted-Interrupts capability for Intel iommu
  iommu, x86: Add cap_pi_support() to detect VT-d PI capability
  iommu, x86: Avoid migrating VT-d posted interrupts
  iommu, x86: Save the mode (posted or remapped) of an IRTE
  iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
  iommu: dmar: Provide helper to copy shared irte fields
  iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
  iommu: Add new member capability to struct irq_remap_ops
  x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
  x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
  x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
  ...

1 files changed, 253 insertions, 0 deletions

diff --git a/arch/x86/entry/vdso/vdso2c.c b/arch/x86/entry/vdso/vdso2c.c
new file mode 100644
index 0000000..8627db2
--- /dev/null
+++ b/arch/x86/entry/vdso/vdso2c.c
@@ -0,0 +1,253 @@
+/*
+ * vdso2c - A vdso image preparation tool
+ * Copyright (c) 2014 Andy Lutomirski and others
+ * Licensed under the GPL v2
+ *
+ * vdso2c requires stripped and unstripped input.  It would be trivial
+ * to fully strip the input in here, but, for reasons described below,
+ * we need to write a section table.  Doing this is more or less
+ * equivalent to dropping all non-allocatable sections, but it's
+ * easier to let objcopy handle that instead of doing it ourselves.
+ * If we ever need to do something fancier than what objcopy provides,
+ * it would be straightforward to add here.
+ *
+ * We're keep a section table for a few reasons:
+ *
+ * The Go runtime had a couple of bugs: it would read the section
+ * table to try to figure out how many dynamic symbols there were (it
+ * shouldn't have looked at the section table at all) and, if there
+ * were no SHT_SYNDYM section table entry, it would use an
+ * uninitialized value for the number of symbols.  An empty DYNSYM
+ * table would work, but I see no reason not to write a valid one (and
+ * keep full performance for old Go programs).  This hack is only
+ * needed on x86_64.
+ *
+ * The bug was introduced on 2012-08-31 by:
+ * https://code.google.com/p/go/source/detail?r=56ea40aac72b
+ * and was fixed on 2014-06-13 by:
+ * https://code.google.com/p/go/source/detail?r=fc1cd5e12595
+ *
+ * Binutils has issues debugging the vDSO: it reads the section table to
+ * find SHT_NOTE; it won't look at PT_NOTE for the in-memory vDSO, which
+ * would break build-id if we removed the section table.  Binutils
+ * also requires that shstrndx != 0.  See:
+ * https://sourceware.org/bugzilla/show_bug.cgi?id=17064
+ *
+ * elfutils might not look for PT_NOTE if there is a section table at
+ * all.  I don't know whether this matters for any practical purpose.
+ *
+ * For simplicity, rather than hacking up a partial section table, we
+ * just write a mostly complete one.  We omit non-dynamic symbols,
+ * though, since they're rather large.
+ *
+ * Once binutils gets fixed, we might be able to drop this for all but
+ * the 64-bit vdso, since build-id only works in kernel RPMs, and
+ * systems that update to new enough kernel RPMs will likely update
+ * binutils in sync.  build-id has never worked for home-built kernel
+ * RPMs without manual symlinking, and I suspect that no one ever does
+ * that.
+ */
+
+#include <inttypes.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <fcntl.h>
+#include <err.h>
+
+#include <sys/mman.h>
+#include <sys/types.h>
+
+#include <tools/le_byteshift.h>
+
+#include <linux/elf.h>
+#include <linux/types.h>
+
+const char *outfilename;
+
+/* Symbols that we need in vdso2c. */
+enum {
+	sym_vvar_start,
+	sym_vvar_page,
+	sym_hpet_page,
+	sym_VDSO_FAKE_SECTION_TABLE_START,
+	sym_VDSO_FAKE_SECTION_TABLE_END,
+};
+
+const int special_pages[] = {
+	sym_vvar_page,
+	sym_hpet_page,
+};
+
+struct vdso_sym {
+	const char *name;
+	bool export;
+};
+
+struct vdso_sym required_syms[] = {
+	[sym_vvar_start] = {"vvar_start", true},
+	[sym_vvar_page] = {"vvar_page", true},
+	[sym_hpet_page] = {"hpet_page", true},
+	[sym_VDSO_FAKE_SECTION_TABLE_START] = {
+		"VDSO_FAKE_SECTION_TABLE_START", false
+	},
+	[sym_VDSO_FAKE_SECTION_TABLE_END] = {
+		"VDSO_FAKE_SECTION_TABLE_END", false
+	},
+	{"VDSO32_NOTE_MASK", true},
+	{"VDSO32_SYSENTER_RETURN", true},
+	{"__kernel_vsyscall", true},
+	{"__kernel_sigreturn", true},
+	{"__kernel_rt_sigreturn", true},
+};
+
+__attribute__((format(printf, 1, 2))) __attribute__((noreturn))
+static void fail(const char *format, ...)
+{
+	va_list ap;
+	va_start(ap, format);
+	fprintf(stderr, "Error: ");
+	vfprintf(stderr, format, ap);
+	if (outfilename)
+		unlink(outfilename);
+	exit(1);
+	va_end(ap);
+}
+
+/*
+ * Evil macros for little-endian reads and writes
+ */
+#define GLE(x, bits, ifnot)						\
+	__builtin_choose_expr(						\
+		(sizeof(*(x)) == bits/8),				\
+		(__typeof__(*(x)))get_unaligned_le##bits(x), ifnot)
+
+extern void bad_get_le(void);
+#define LAST_GLE(x)							\
+	__builtin_choose_expr(sizeof(*(x)) == 1, *(x), bad_get_le())
+
+#define GET_LE(x)							\
+	GLE(x, 64, GLE(x, 32, GLE(x, 16, LAST_GLE(x))))
+
+#define PLE(x, val, bits, ifnot)					\
+	__builtin_choose_expr(						\
+		(sizeof(*(x)) == bits/8),				\
+		put_unaligned_le##bits((val), (x)), ifnot)
+
+extern void bad_put_le(void);
+#define LAST_PLE(x, val)						\
+	__builtin_choose_expr(sizeof(*(x)) == 1, *(x) = (val), bad_put_le())
+
+#define PUT_LE(x, val)					\
+	PLE(x, val, 64, PLE(x, val, 32, PLE(x, val, 16, LAST_PLE(x, val))))
+
+
+#define NSYMS (sizeof(required_syms) / sizeof(required_syms[0]))
+
+#define BITSFUNC3(name, bits, suffix) name##bits##suffix
+#define BITSFUNC2(name, bits, suffix) BITSFUNC3(name, bits, suffix)
+#define BITSFUNC(name) BITSFUNC2(name, ELF_BITS, )
+
+#define INT_BITS BITSFUNC2(int, ELF_BITS, _t)
+
+#define ELF_BITS_XFORM2(bits, x) Elf##bits##_##x
+#define ELF_BITS_XFORM(bits, x) ELF_BITS_XFORM2(bits, x)
+#define ELF(x) ELF_BITS_XFORM(ELF_BITS, x)
+
+#define ELF_BITS 64
+#include "vdso2c.h"
+#undef ELF_BITS
+
+#define ELF_BITS 32
+#include "vdso2c.h"
+#undef ELF_BITS
+
+static void go(void *raw_addr, size_t raw_len,
+	       void *stripped_addr, size_t stripped_len,
+	       FILE *outfile, const char *name)
+{
+	Elf64_Ehdr *hdr = (Elf64_Ehdr *)raw_addr;
+
+	if (hdr->e_ident[EI_CLASS] == ELFCLASS64) {
+		go64(raw_addr, raw_len, stripped_addr, stripped_len,
+		     outfile, name);
+	} else if (hdr->e_ident[EI_CLASS] == ELFCLASS32) {
+		go32(raw_addr, raw_len, stripped_addr, stripped_len,
+		     outfile, name);
+	} else {
+		fail("unknown ELF class\n");
+	}
+}
+
+static void map_input(const char *name, void **addr, size_t *len, int prot)
+{
+	off_t tmp_len;
+
+	int fd = open(name, O_RDONLY);
+	if (fd == -1)
+		err(1, "%s", name);
+
+	tmp_len = lseek(fd, 0, SEEK_END);
+	if (tmp_len == (off_t)-1)
+		err(1, "lseek");
+	*len = (size_t)tmp_len;
+
+	*addr = mmap(NULL, tmp_len, prot, MAP_PRIVATE, fd, 0);
+	if (*addr == MAP_FAILED)
+		err(1, "mmap");
+
+	close(fd);
+}
+
+int main(int argc, char **argv)
+{
+	size_t raw_len, stripped_len;
+	void *raw_addr, *stripped_addr;
+	FILE *outfile;
+	char *name, *tmp;
+	int namelen;
+
+	if (argc != 4) {
+		printf("Usage: vdso2c RAW_INPUT STRIPPED_INPUT OUTPUT\n");
+		return 1;
+	}
+
+	/*
+	 * Figure out the struct name.  If we're writing to a .so file,
+	 * generate raw output insted.
+	 */
+	name = strdup(argv[3]);
+	namelen = strlen(name);
+	if (namelen >= 3 && !strcmp(name + namelen - 3, ".so")) {
+		name = NULL;
+	} else {
+		tmp = strrchr(name, '/');
+		if (tmp)
+			name = tmp + 1;
+		tmp = strchr(name, '.');
+		if (tmp)
+			*tmp = '\0';
+		for (tmp = name; *tmp; tmp++)
+			if (*tmp == '-')
+				*tmp = '_';
+	}
+
+	map_input(argv[1], &raw_addr, &raw_len, PROT_READ);
+	map_input(argv[2], &stripped_addr, &stripped_len, PROT_READ);
+
+	outfilename = argv[3];
+	outfile = fopen(outfilename, "w");
+	if (!outfile)
+		err(1, "%s", argv[2]);
+
+	go(raw_addr, raw_len, stripped_addr, stripped_len, outfile, name);
+
+	munmap(raw_addr, raw_len);
+	munmap(stripped_addr, stripped_len);
+	fclose(outfile);
+
+	return 0;
+}