Merge branch 'linus' into sfi-release

Conflicts:
	arch/x86/kernel/setup.c
	drivers/acpi/power.c
	init/main.c

Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 35 insertions, 56 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4c92c91..1c9a181 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -38,7 +38,7 @@ config X86
 	select HAVE_FUNCTION_GRAPH_FP_TEST
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
-	select HAVE_FTRACE_SYSCALLS
+	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_KVM
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
@@ -150,7 +150,10 @@ config ARCH_HAS_CACHE_LINE_SIZE
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y
 
-config HAVE_DYNAMIC_PER_CPU_AREA
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+	def_bool y
+
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
 	def_bool y
 
 config HAVE_CPUMASK_OF_CPU_MAP
@@ -179,6 +182,10 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
+config HAVE_INTEL_TXT
+	def_bool y
+	depends on EXPERIMENTAL && DMAR && ACPI
+
 # Use the generic interrupt handling code in kernel/irq/:
 config GENERIC_HARDIRQS
 	bool
@@ -318,6 +325,7 @@ config X86_EXTENDED_PLATFORM
 		SGI 320/540 (Visual Workstation)
 		Summit/EXA (IBM x440)
 		Unisys ES7000 IA32 series
+		Moorestown MID devices
 
 	  If you have one of these systems, or if you want to build a
 	  generic distribution kernel, say Y here - otherwise say N.
@@ -377,6 +385,18 @@ config X86_ELAN
 
 	  If unsure, choose "PC-compatible" instead.
 
+config X86_MRST
+       bool "Moorestown MID platform"
+	depends on X86_32
+	depends on X86_EXTENDED_PLATFORM
+	---help---
+	  Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
+	  Internet Device(MID) platform. Moorestown consists of two chips:
+	  Lincroft (CPU core, graphics, and memory controller) and Langwell IOH.
+	  Unlike standard x86 PCs, Moorestown does not have many legacy devices
+	  nor standard legacy replacement devices/features. e.g. Moorestown does
+	  not contain i8259, i8254, HPET, legacy BIOS, most of the io ports.
+
 config X86_RDC321X
 	bool "RDC R-321x SoC"
 	depends on X86_32
@@ -586,7 +606,6 @@ config GART_IOMMU
 	bool "GART IOMMU support" if EMBEDDED
 	default y
 	select SWIOTLB
-	select AGP
 	depends on X86_64 && PCI
 	---help---
 	  Support for full DMA access of devices with 32bit memory access only
@@ -777,41 +796,17 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	  increased on these systems.
 
 config X86_MCE
-	bool "Machine Check Exception"
+	bool "Machine Check / overheating reporting"
 	---help---
-	  Machine Check Exception support allows the processor to notify the
-	  kernel if it detects a problem (e.g. overheating, component failure).
+	  Machine Check support allows the processor to notify the
+	  kernel if it detects a problem (e.g. overheating, data corruption).
 	  The action the kernel takes depends on the severity of the problem,
-	  ranging from a warning message on the console, to halting the machine.
-	  Your processor must be a Pentium or newer to support this - check the
-	  flags in /proc/cpuinfo for mce.  Note that some older Pentium systems
-	  have a design flaw which leads to false MCE events - hence MCE is
-	  disabled on all P5 processors, unless explicitly enabled with "mce"
-	  as a boot argument.  Similarly, if MCE is built in and creates a
-	  problem on some new non-standard machine, you can boot with "nomce"
-	  to disable it.  MCE support simply ignores non-MCE processors like
-	  the 386 and 486, so nearly everyone can say Y here.
-
-config X86_OLD_MCE
-	depends on X86_32 && X86_MCE
-	bool "Use legacy machine check code (will go away)"
-	default n
-	select X86_ANCIENT_MCE
-	---help---
-	  Use the old i386 machine check code. This is merely intended for
-	  testing in a transition period. Try this if you run into any machine
-	  check related software problems, but report the problem to
-	  linux-kernel.  When in doubt say no.
-
-config X86_NEW_MCE
-	depends on X86_MCE
-	bool
-	default y if (!X86_OLD_MCE && X86_32) || X86_64
+	  ranging from warning messages to halting the machine.
 
 config X86_MCE_INTEL
 	def_bool y
 	prompt "Intel MCE features"
-	depends on X86_NEW_MCE && X86_LOCAL_APIC
+	depends on X86_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for intel specific MCE features such as
 	   the thermal monitor.
@@ -819,14 +814,14 @@ config X86_MCE_INTEL
 config X86_MCE_AMD
 	def_bool y
 	prompt "AMD MCE features"
-	depends on X86_NEW_MCE && X86_LOCAL_APIC
+	depends on X86_MCE && X86_LOCAL_APIC
 	---help---
 	   Additional support for AMD specific MCE features such as
 	   the DRAM Error Threshold.
 
 config X86_ANCIENT_MCE
 	def_bool n
-	depends on X86_32
+	depends on X86_32 && X86_MCE
 	prompt "Support for old Pentium 5 / WinChip machine checks"
 	---help---
 	  Include support for machine check handling on old Pentium 5 or WinChip
@@ -839,36 +834,16 @@ config X86_MCE_THRESHOLD
 	default y
 
 config X86_MCE_INJECT
-	depends on X86_NEW_MCE
+	depends on X86_MCE
 	tristate "Machine check injector support"
 	---help---
 	  Provide support for injecting machine checks for testing purposes.
 	  If you don't know what a machine check is and you don't do kernel
 	  QA it is safe to say n.
 
-config X86_MCE_NONFATAL
-	tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
-	depends on X86_OLD_MCE
-	---help---
-	  Enabling this feature starts a timer that triggers every 5 seconds which
-	  will look at the machine check registers to see if anything happened.
-	  Non-fatal problems automatically get corrected (but still logged).
-	  Disable this if you don't want to see these messages.
-	  Seeing the messages this option prints out may be indicative of dying
-	  or out-of-spec (ie, overclocked) hardware.
-	  This option only does something on certain CPUs.
-	  (AMD Athlon/Duron and Intel Pentium 4)
-
-config X86_MCE_P4THERMAL
-	bool "check for P4 thermal throttling interrupt."
-	depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP)
-	---help---
-	  Enabling this feature will cause a message to be printed when the P4
-	  enters thermal throttling.
-
 config X86_THERMAL_VECTOR
 	def_bool y
-	depends on X86_MCE_P4THERMAL || X86_MCE_INTEL
+	depends on X86_MCE_INTEL
 
 config VM86
 	bool "Enable VM86 support" if EMBEDDED
@@ -1414,6 +1389,10 @@ config X86_PAT
 
 	  If unsure, say Y.
 
+config ARCH_USES_PG_UNCACHED
+	def_bool y
+	depends on X86_PAT
+
 config EFI
 	bool "EFI runtime service support"
 	depends on ACPI