summaryrefslogtreecommitdiffstats
path: root/arch/um
diff options
context:
space:
mode:
authorJeff Dike <jdike@addtoit.com>2006-01-06 00:18:57 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2006-01-06 08:33:46 -0800
commit165dc5911627a9c4752e909a0da661b96b6fd269 (patch)
tree7e8eb47b7e766a5296b9e15ef177f958dec16d93 /arch/um
parent1f80171e81ed0d08dcdb6efe239d7b929aef498f (diff)
downloadop-kernel-dev-165dc5911627a9c4752e909a0da661b96b6fd269.zip
op-kernel-dev-165dc5911627a9c4752e909a0da661b96b6fd269.tar.gz
[PATCH] uml: Simplify console opening/closing and irq registration
This patch simplifies the opening and closing of host console devices and the registration and deregistration of IRQs. The intent is to make it obvious that an IRQ can't exist without an open file descriptor. chan_enable will now open the channel, and when both opening and IRQ registration are desired, this should be used. Opening only is done for the initial console, so that interface still needs to exist. The free_irqs_later interface is now gone. It was intended to avoid freeing an IRQ while it was being processed. It did this, but it didn't eliminate the possiblity of free_irq being called from an interrupt, which is bad. In its place is a list of irqs to be freed, which is processed by the signal handler just before exiting. close_one_chan now disables irqs. When a host device disappears, it is just closed, and that disables IRQs. The device id registered with the IRQ is now the chan structure, not the tty. This is because the interrupt arrives on a descriptor associated with the channel. This caused equivalent changes in the arguments to line_timer_cb. line_disable is gone since it is not used any more. The count field in the line structure is gone. tty->count is used instead. The complicated logic in sigio_handler with freeing IRQs when necessary and making sure its idea of the next irq is correct is now much simpler. The irq list can't be rearranged underneath it, so it is now a simple list walk. Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'arch/um')
-rw-r--r--arch/um/drivers/chan_kern.c111
-rw-r--r--arch/um/drivers/line.c116
-rw-r--r--arch/um/include/chan_kern.h9
-rw-r--r--arch/um/include/irq_user.h13
-rw-r--r--arch/um/include/line.h6
-rw-r--r--arch/um/kernel/irq_user.c48
6 files changed, 137 insertions, 166 deletions
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index 31b69c4..1bb920c 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
@@ -240,20 +240,65 @@ void chan_enable_winch(struct list_head *chans, struct tty_struct *tty)
}
}
-void enable_chan(struct list_head *chans, struct tty_struct *tty)
+void enable_chan(struct line *line)
{
struct list_head *ele;
struct chan *chan;
- list_for_each(ele, chans){
+ list_for_each(ele, &line->chan_list){
chan = list_entry(ele, struct chan, list);
- if(!chan->opened) continue;
+ if(open_one_chan(chan))
+ continue;
+
+ if(chan->enabled)
+ continue;
+ line_setup_irq(chan->fd, chan->input, chan->output, line,
+ chan);
+ chan->enabled = 1;
+ }
+}
+
+static LIST_HEAD(irqs_to_free);
+
+void free_irqs(void)
+{
+ struct chan *chan;
+
+ while(!list_empty(&irqs_to_free)){
+ chan = list_entry(irqs_to_free.next, struct chan, free_list);
+ list_del(&chan->free_list);
+
+ if(chan->input)
+ free_irq(chan->line->driver->read_irq, chan);
+ if(chan->output)
+ free_irq(chan->line->driver->write_irq, chan);
+ chan->enabled = 0;
+ }
+}
+
+static void close_one_chan(struct chan *chan, int delay_free_irq)
+{
+ if(!chan->opened)
+ return;
- line_setup_irq(chan->fd, chan->input, chan->output, tty);
+ if(delay_free_irq){
+ list_add(&chan->free_list, &irqs_to_free);
+ }
+ else {
+ if(chan->input)
+ free_irq(chan->line->driver->read_irq, chan);
+ if(chan->output)
+ free_irq(chan->line->driver->write_irq, chan);
+ chan->enabled = 0;
}
+ if(chan->ops->close != NULL)
+ (*chan->ops->close)(chan->fd, chan->data);
+
+ chan->opened = 0;
+ chan->fd = -1;
}
-void close_chan(struct list_head *chans)
+void close_chan(struct list_head *chans, int delay_free_irq)
{
struct chan *chan;
@@ -263,11 +308,7 @@ void close_chan(struct list_head *chans)
* so it must be the last closed.
*/
list_for_each_entry_reverse(chan, chans, list) {
- if(!chan->opened) continue;
- if(chan->ops->close != NULL)
- (*chan->ops->close)(chan->fd, chan->data);
- chan->opened = 0;
- chan->fd = -1;
+ close_one_chan(chan, delay_free_irq);
}
}
@@ -339,24 +380,27 @@ int chan_window_size(struct list_head *chans, unsigned short *rows_out,
return 0;
}
-void free_one_chan(struct chan *chan)
+void free_one_chan(struct chan *chan, int delay_free_irq)
{
list_del(&chan->list);
+
+ close_one_chan(chan, delay_free_irq);
+
if(chan->ops->free != NULL)
(*chan->ops->free)(chan->data);
- free_irq_by_fd(chan->fd);
+
if(chan->primary && chan->output) ignore_sigio_fd(chan->fd);
kfree(chan);
}
-void free_chan(struct list_head *chans)
+void free_chan(struct list_head *chans, int delay_free_irq)
{
struct list_head *ele, *next;
struct chan *chan;
list_for_each_safe(ele, next, chans){
chan = list_entry(ele, struct chan, list);
- free_one_chan(chan);
+ free_one_chan(chan, delay_free_irq);
}
}
@@ -466,7 +510,8 @@ struct chan_type chan_table[] = {
#endif
};
-static struct chan *parse_chan(char *str, int device, struct chan_opts *opts)
+static struct chan *parse_chan(struct line *line, char *str, int device,
+ struct chan_opts *opts)
{
struct chan_type *entry;
struct chan_ops *ops;
@@ -499,25 +544,30 @@ static struct chan *parse_chan(char *str, int device, struct chan_opts *opts)
if(chan == NULL)
return NULL;
*chan = ((struct chan) { .list = LIST_HEAD_INIT(chan->list),
+ .free_list =
+ LIST_HEAD_INIT(chan->free_list),
+ .line = line,
.primary = 1,
.input = 0,
.output = 0,
.opened = 0,
+ .enabled = 0,
.fd = -1,
.ops = ops,
.data = data });
return chan;
}
-int parse_chan_pair(char *str, struct list_head *chans, int device,
+int parse_chan_pair(char *str, struct line *line, int device,
struct chan_opts *opts)
{
+ struct list_head *chans = &line->chan_list;
struct chan *new, *chan;
char *in, *out;
if(!list_empty(chans)){
chan = list_entry(chans->next, struct chan, list);
- free_chan(chans);
+ free_chan(chans, 0);
INIT_LIST_HEAD(chans);
}
@@ -526,14 +576,14 @@ int parse_chan_pair(char *str, struct list_head *chans, int device,
in = str;
*out = '\0';
out++;
- new = parse_chan(in, device, opts);
+ new = parse_chan(line, in, device, opts);
if(new == NULL)
return -1;
new->input = 1;
list_add(&new->list, chans);
- new = parse_chan(out, device, opts);
+ new = parse_chan(line, out, device, opts);
if(new == NULL)
return -1;
@@ -541,7 +591,7 @@ int parse_chan_pair(char *str, struct list_head *chans, int device,
new->output = 1;
}
else {
- new = parse_chan(str, device, opts);
+ new = parse_chan(line, str, device, opts);
if(new == NULL)
return -1;
@@ -592,27 +642,12 @@ void chan_interrupt(struct list_head *chans, struct work_struct *task,
if(chan->primary){
if(tty != NULL)
tty_hangup(tty);
- line_disable(tty, irq);
- close_chan(chans);
+ close_chan(chans, 1);
return;
}
- else {
- if(chan->ops->close != NULL)
- chan->ops->close(chan->fd, chan->data);
- }
+ else close_one_chan(chan, 1);
}
}
out:
if(tty) tty_flip_buffer_push(tty);
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index da81d22..851a7c8 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -1,4 +1,4 @@
-/*
+/*
* Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com)
* Licensed under the GPL
*/
@@ -23,8 +23,9 @@
static irqreturn_t line_interrupt(int irq, void *data, struct pt_regs *unused)
{
- struct tty_struct *tty = data;
- struct line *line = tty->driver_data;
+ struct chan *chan = data;
+ struct line *line = chan->line;
+ struct tty_struct *tty = line->tty;
if (line)
chan_interrupt(&line->chan_list, &line->task, tty, irq);
@@ -33,10 +34,10 @@ static irqreturn_t line_interrupt(int irq, void *data, struct pt_regs *unused)
static void line_timer_cb(void *arg)
{
- struct tty_struct *tty = arg;
- struct line *line = tty->driver_data;
+ struct line *line = arg;
- line_interrupt(line->driver->read_irq, arg, NULL);
+ chan_interrupt(&line->chan_list, &line->task, line->tty,
+ line->driver->read_irq);
}
/* Returns the free space inside the ring buffer of this line.
@@ -342,8 +343,9 @@ int line_ioctl(struct tty_struct *tty, struct file * file,
static irqreturn_t line_write_interrupt(int irq, void *data,
struct pt_regs *unused)
{
- struct tty_struct *tty = data;
- struct line *line = tty->driver_data;
+ struct chan *chan = data;
+ struct line *line = chan->line;
+ struct tty_struct *tty = line->tty;
int err;
/* Interrupts are enabled here because we registered the interrupt with
@@ -365,7 +367,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data,
if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) &&
(tty->ldisc.write_wakeup != NULL))
(tty->ldisc.write_wakeup)(tty);
-
+
/* BLOCKING mode
* In blocking mode, everything sleeps on tty->write_wait.
* Sleeping in the console driver would break non-blocking
@@ -377,52 +379,29 @@ static irqreturn_t line_write_interrupt(int irq, void *data,
return IRQ_HANDLED;
}
-int line_setup_irq(int fd, int input, int output, struct tty_struct *tty)
+int line_setup_irq(int fd, int input, int output, struct line *line, void *data)
{
- struct line *line = tty->driver_data;
struct line_driver *driver = line->driver;
int err = 0, flags = SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM;
if (input)
err = um_request_irq(driver->read_irq, fd, IRQ_READ,
line_interrupt, flags,
- driver->read_irq_name, tty);
+ driver->read_irq_name, data);
if (err)
return err;
if (output)
err = um_request_irq(driver->write_irq, fd, IRQ_WRITE,
line_write_interrupt, flags,
- driver->write_irq_name, tty);
+ driver->write_irq_name, data);
line->have_irq = 1;
return err;
}
-void line_disable(struct tty_struct *tty, int current_irq)
-{
- struct line *line = tty->driver_data;
-
- if(!line->have_irq)
- return;
-
- if(line->driver->read_irq == current_irq)
- free_irq_later(line->driver->read_irq, tty);
- else {
- free_irq(line->driver->read_irq, tty);
- }
-
- if(line->driver->write_irq == current_irq)
- free_irq_later(line->driver->write_irq, tty);
- else {
- free_irq(line->driver->write_irq, tty);
- }
-
- line->have_irq = 0;
-}
-
int line_open(struct line *lines, struct tty_struct *tty)
{
struct line *line;
- int err = 0;
+ int err = -ENODEV;
line = &lines[tty->index];
tty->driver_data = line;
@@ -430,29 +409,29 @@ int line_open(struct line *lines, struct tty_struct *tty)
/* The IRQ which takes this lock is not yet enabled and won't be run
* before the end, so we don't need to use spin_lock_irq.*/
spin_lock(&line->lock);
- if (tty->count == 1) {
- if (!line->valid) {
- err = -ENODEV;
- goto out;
- }
- err = open_chan(&line->chan_list);
- if(err)
- goto out;
-
- /* Here the interrupt is registered.*/
- enable_chan(&line->chan_list, tty);
- INIT_WORK(&line->task, line_timer_cb, tty);
- }
+ tty->driver_data = line;
+ line->tty = tty;
+ if(!line->valid)
+ goto out;
+
+ if(tty->count == 1){
+ /* Here the device is opened, if necessary, and interrupt
+ * is registered.
+ */
+ enable_chan(line);
+ INIT_WORK(&line->task, line_timer_cb, line);
+
+ if(!line->sigio){
+ chan_enable_winch(&line->chan_list, tty);
+ line->sigio = 1;
+ }
- if(!line->sigio){
- chan_enable_winch(&line->chan_list, tty);
- line->sigio = 1;
+ chan_window_size(&line->chan_list, &tty->winsize.ws_row,
+ &tty->winsize.ws_col);
}
- chan_window_size(&line->chan_list, &tty->winsize.ws_row,
- &tty->winsize.ws_col);
- line->count++;
+ err = 0;
out:
spin_unlock(&line->lock);
return err;
@@ -472,15 +451,14 @@ void line_close(struct tty_struct *tty, struct file * filp)
/* We ignore the error anyway! */
flush_buffer(line);
- line->count--;
- if (tty->count == 1) {
- line_disable(tty, -1);
+ if(tty->count == 1){
+ line->tty = NULL;
tty->driver_data = NULL;
- }
- if((line->count == 0) && line->sigio){
- unregister_winch(tty);
- line->sigio = 0;
+ if(line->sigio){
+ unregister_winch(tty);
+ line->sigio = 0;
+ }
}
spin_unlock_irq(&line->lock);
@@ -491,7 +469,7 @@ void close_lines(struct line *lines, int nlines)
int i;
for(i = 0; i < nlines; i++)
- close_chan(&lines[i].chan_list);
+ close_chan(&lines[i].chan_list, 0);
}
/* Common setup code for both startup command line and mconsole initialization.
@@ -526,7 +504,7 @@ int line_setup(struct line *lines, unsigned int num, char *init)
return 0;
}
else if (n >= 0){
- if (lines[n].count > 0) {
+ if (lines[n].tty != NULL) {
printk("line_setup - device %d is open\n", n);
return 0;
}
@@ -537,7 +515,7 @@ int line_setup(struct line *lines, unsigned int num, char *init)
else {
lines[n].init_str = init;
lines[n].valid = 1;
- }
+ }
}
}
else {
@@ -578,7 +556,7 @@ int line_config(struct line *lines, unsigned int num, char *str,
return 1;
line = &lines[n];
- return parse_chan_pair(line->init_str, &line->chan_list, n, opts);
+ return parse_chan_pair(line->init_str, line, n, opts);
}
int line_get_config(char *name, struct line *lines, unsigned int num, char *str,
@@ -604,7 +582,7 @@ int line_get_config(char *name, struct line *lines, unsigned int num, char *str,
spin_lock(&line->lock);
if(!line->valid)
CONFIG_CHUNK(str, size, n, "none", 1);
- else if(line->count == 0)
+ else if(line->tty == NULL)
CONFIG_CHUNK(str, size, n, line->init_str, 1);
else n = chan_config_string(&line->chan_list, str, size, error_out);
spin_unlock(&line->lock);
@@ -696,7 +674,7 @@ void lines_init(struct line *lines, int nlines, struct chan_opts *opts)
if(line->init_str == NULL)
printk("lines_init - kstrdup returned NULL\n");
- if(parse_chan_pair(line->init_str, &line->chan_list, i, opts)){
+ if(parse_chan_pair(line->init_str, line, i, opts)){
printk("parse_chan_pair failed for device %d\n", i);
line->valid = 0;
}
@@ -831,7 +809,7 @@ char *add_xterm_umid(char *base)
umid = get_umid(1);
if(umid == NULL)
return base;
-
+
len = strlen(base) + strlen(" ()") + strlen(umid) + 1;
title = kmalloc(len, GFP_KERNEL);
if(title == NULL){
diff --git a/arch/um/include/chan_kern.h b/arch/um/include/chan_kern.h
index 22bf3a7..84d1f64 100644
--- a/arch/um/include/chan_kern.h
+++ b/arch/um/include/chan_kern.h
@@ -14,11 +14,14 @@
struct chan {
struct list_head list;
+ struct list_head free_list;
+ struct line *line;
char *dev;
unsigned int primary:1;
unsigned int input:1;
unsigned int output:1;
unsigned int opened:1;
+ unsigned int enabled:1;
int fd;
struct chan_ops *ops;
void *data;
@@ -26,7 +29,7 @@ struct chan {
extern void chan_interrupt(struct list_head *chans, struct work_struct *task,
struct tty_struct *tty, int irq);
-extern int parse_chan_pair(char *str, struct list_head *chans, int device,
+extern int parse_chan_pair(char *str, struct line *line, int device,
struct chan_opts *opts);
extern int open_chan(struct list_head *chans);
extern int write_chan(struct list_head *chans, const char *buf, int len,
@@ -35,9 +38,9 @@ extern int console_write_chan(struct list_head *chans, const char *buf,
int len);
extern int console_open_chan(struct line *line, struct console *co,
struct chan_opts *opts);
-extern void close_chan(struct list_head *chans);
extern void chan_enable_winch(struct list_head *chans, struct tty_struct *tty);
-extern void enable_chan(struct list_head *chans, struct tty_struct *tty);
+extern void enable_chan(struct line *line);
+extern void close_chan(struct list_head *chans, int delay_free_irq);
extern int chan_window_size(struct list_head *chans,
unsigned short *rows_out,
unsigned short *cols_out);
diff --git a/arch/um/include/irq_user.h b/arch/um/include/irq_user.h
index f724b71..b61deb8 100644
--- a/arch/um/include/irq_user.h
+++ b/arch/um/include/irq_user.h
@@ -18,19 +18,8 @@ extern int deactivate_all_fds(void);
extern void forward_interrupts(int pid);
extern void init_irq_signals(int on_sigstack);
extern void forward_ipi(int fd, int pid);
-extern void free_irq_later(int irq, void *dev_id);
extern int activate_ipi(int fd, int pid);
extern unsigned long irq_lock(void);
extern void irq_unlock(unsigned long flags);
-#endif
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+#endif
diff --git a/arch/um/include/line.h b/arch/um/include/line.h
index 474398b..e6cc3ab 100644
--- a/arch/um/include/line.h
+++ b/arch/um/include/line.h
@@ -32,6 +32,7 @@ struct line_driver {
};
struct line {
+ struct tty_struct *tty;
char *init_str;
int init_pri;
struct list_head chan_list;
@@ -89,10 +90,9 @@ extern int line_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg);
extern char *add_xterm_umid(char *base);
-extern int line_setup_irq(int fd, int input, int output,
- struct tty_struct *tty);
+extern int line_setup_irq(int fd, int input, int output, struct line *line,
+ void *data);
extern void line_close_chan(struct line *line);
-extern void line_disable(struct tty_struct *tty, int current_irq);
extern struct tty_driver * line_register_devfs(struct lines *set,
struct line_driver *line_driver,
struct tty_operations *driver,
diff --git a/arch/um/kernel/irq_user.c b/arch/um/kernel/irq_user.c
index c3ccaf2..50a2aa3 100644
--- a/arch/um/kernel/irq_user.c
+++ b/arch/um/kernel/irq_user.c
@@ -29,7 +29,6 @@ struct irq_fd {
int pid;
int events;
int current_events;
- int freed;
};
static struct irq_fd *active_fds = NULL;
@@ -41,9 +40,11 @@ static int pollfds_size = 0;
extern int io_count, intr_count;
+extern void free_irqs(void);
+
void sigio_handler(int sig, union uml_pt_regs *regs)
{
- struct irq_fd *irq_fd, *next;
+ struct irq_fd *irq_fd;
int i, n;
if(smp_sigio_handler()) return;
@@ -66,29 +67,15 @@ void sigio_handler(int sig, union uml_pt_regs *regs)
irq_fd = irq_fd->next;
}
- for(irq_fd = active_fds; irq_fd != NULL; irq_fd = next){
- next = irq_fd->next;
+ for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){
if(irq_fd->current_events != 0){
irq_fd->current_events = 0;
do_IRQ(irq_fd->irq, regs);
-
- /* This is here because the next irq may be
- * freed in the handler. If a console goes
- * away, both the read and write irqs will be
- * freed. After do_IRQ, ->next will point to
- * a good IRQ.
- * Irqs can't be freed inside their handlers,
- * so the next best thing is to have them
- * marked as needing freeing, so that they
- * can be freed here.
- */
- next = irq_fd->next;
- if(irq_fd->freed){
- free_irq(irq_fd->irq, irq_fd->id);
- }
}
}
}
+
+ free_irqs();
}
int activate_ipi(int fd, int pid)
@@ -136,8 +123,7 @@ int activate_fd(int irq, int fd, int type, void *dev_id)
.irq = irq,
.pid = pid,
.events = events,
- .current_events = 0,
- .freed = 0 } );
+ .current_events = 0 } );
/* Critical section - locked by a spinlock because this stuff can
* be changed from interrupt handlers. The stuff above is done
@@ -313,26 +299,6 @@ static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out)
return(irq);
}
-void free_irq_later(int irq, void *dev_id)
-{
- struct irq_fd *irq_fd;
- unsigned long flags;
-
- flags = irq_lock();
- for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){
- if((irq_fd->irq == irq) && (irq_fd->id == dev_id))
- break;
- }
- if(irq_fd == NULL){
- printk("free_irq_later found no irq, irq = %d, "
- "dev_id = 0x%p\n", irq, dev_id);
- goto out;
- }
- irq_fd->freed = 1;
- out:
- irq_unlock(flags);
-}
-
void reactivate_fd(int fd, int irqnum)
{
struct irq_fd *irq;
OpenPOWER on IntegriCloud