tile: remove support for TILE64

This chip is no longer being actively developed for (it was superceded
by the TILEPro64 in 2008), and in any case the existing compiler and
toolchain in the community do not support it.  It's unlikely that the
kernel works with TILE64 at this point as the configuration has not been
tested in years.  The support is also awkward as it requires maintaining
a significant number of ifdefs.  So, just remove it altogether.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

8 files changed, 6 insertions, 132 deletions

diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index f084f1c..088d5c1 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -32,12 +32,6 @@
 
 #define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR)
 
-#if !CHIP_HAS_WH64()
-	/* By making this an empty macro, we can use wh64 in the code. */
-	.macro  wh64 reg
-	.endm
-#endif
-
 	.macro  push_reg reg, ptr=sp, delta=-4
 	{
 	 sw     \ptr, \reg
@@ -325,18 +319,14 @@ intvec_\vecname:
 	 movei  r3, -1   /* not used, but set for consistency */
 	}
 	.else
-#if CHIP_HAS_AUX_PERF_COUNTERS()
 	.ifc \c_routine, op_handle_aux_perf_interrupt
 	{
 	 mfspr  r2, AUX_PERF_COUNT_STS
 	 movei  r3, -1   /* not used, but set for consistency */
 	}
 	.else
-#endif
 	movei   r3, 0
-#if CHIP_HAS_AUX_PERF_COUNTERS()
 	.endif
-#endif
 	.endif
 	.endif
 	.endif
@@ -561,7 +551,6 @@ intvec_\vecname:
 	.endif
 	mtspr   INTERRUPT_CRITICAL_SECTION, zero
 
-#if CHIP_HAS_WH64()
 	/*
 	 * Prepare the first 256 stack bytes to be rapidly accessible
 	 * without having to fetch the background data.  We don't really
@@ -582,7 +571,6 @@ intvec_\vecname:
 	 addi   r52, r52, -64
 	}
 	wh64    r52
-#endif
 
 #ifdef CONFIG_TRACE_IRQFLAGS
 	.ifnc \function,handle_nmi
@@ -1533,12 +1521,10 @@ STD_ENTRY(_sys_clone)
 	__HEAD
 	.align 64
 	/* Align much later jump on the start of a cache line. */
-#if !ATOMIC_LOCKS_FOUND_VIA_TABLE()
 	nop
 #if PAGE_SIZE >= 0x10000
 	nop
 #endif
-#endif
 ENTRY(sys_cmpxchg)
 
 	/*
@@ -1572,45 +1558,6 @@ ENTRY(sys_cmpxchg)
 # error Code here assumes PAGE_OFFSET can be loaded with just hi16()
 #endif
 
-#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
-	{
-	 /* Check for unaligned input. */
-	 bnz    sp, .Lcmpxchg_badaddr
-	 mm     r25, r0, zero, 3, PAGE_SHIFT-1
-	}
-	{
-	 crc32_32 r25, zero, r25
-	 moveli r21, lo16(atomic_lock_ptr)
-	}
-	{
-	 auli   r21, r21, ha16(atomic_lock_ptr)
-	 auli   r23, zero, hi16(PAGE_OFFSET)  /* hugepage-aligned */
-	}
-	{
-	 shri	r20, r25, 32 - ATOMIC_HASH_L1_SHIFT
-	 slt_u  r23, r0, r23
-	 lw	r26, r0  /* see comment in the "#else" for the "lw r26". */
-	}
-	{
-	 s2a    r21, r20, r21
-	 bbns   r23, .Lcmpxchg_badaddr
-	}
-	{
-	 lw     r21, r21
-	 seqi	r23, TREG_SYSCALL_NR_NAME, __NR_FAST_cmpxchg64
-	 andi	r25, r25, ATOMIC_HASH_L2_SIZE - 1
-	}
-	{
-	 /* Branch away at this point if we're doing a 64-bit cmpxchg. */
-	 bbs    r23, .Lcmpxchg64
-	 andi   r23, r0, 7       /* Precompute alignment for cmpxchg64. */
-	}
-	{
-	 s2a	ATOMIC_LOCK_REG_NAME, r25, r21
-	 j      .Lcmpxchg32_tns   /* see comment in the #else for the jump. */
-	}
-
-#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
 	{
 	 /* Check for unaligned input. */
 	 bnz    sp, .Lcmpxchg_badaddr
@@ -1635,12 +1582,9 @@ ENTRY(sys_cmpxchg)
 
 	 /*
 	  * Ensure that the TLB is loaded before we take out the lock.
-	  * On tilepro, this will start fetching the value all the way
-	  * into our L1 as well (and if it gets modified before we
-	  * grab the lock, it will be invalidated from our cache
-	  * before we reload it).  On tile64, we'll start fetching it
-	  * into our L1 if we're the home, and if we're not, we'll
-	  * still at least start fetching it into the home's L2.
+	  * This will start fetching the value all the way into our L1
+	  * as well (and if it gets modified before we grab the lock,
+	  * it will be invalidated from our cache before we reload it).
 	  */
 	 lw	r26, r0
 	}
@@ -1683,8 +1627,6 @@ ENTRY(sys_cmpxchg)
 	 j      .Lcmpxchg32_tns
 	}
 
-#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
-
 /* Symbol for do_page_fault_ics() to use to compare against the PC. */
 .global __sys_cmpxchg_grab_lock
 __sys_cmpxchg_grab_lock:
@@ -1822,9 +1764,6 @@ __sys_cmpxchg_grab_lock:
 	.align 64
 .Lcmpxchg64:
 	{
-#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
-	 s2a	ATOMIC_LOCK_REG_NAME, r25, r21
-#endif
 	 bzt     r23, .Lcmpxchg64_tns
 	}
 	j       .Lcmpxchg_badaddr
@@ -1959,10 +1898,8 @@ int_unalign:
 		     do_page_fault
 	int_hand     INT_SN_CPL, SN_CPL, bad_intr
 	int_hand     INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap
-#if CHIP_HAS_AUX_PERF_COUNTERS()
 	int_hand     INT_AUX_PERF_COUNT, AUX_PERF_COUNT, \
 		     op_handle_aux_perf_interrupt, handle_nmi
-#endif
 
 	/* Synthetic interrupt delivered only by the simulator */
 	int_hand     INT_BREAKPOINT, BREAKPOINT, do_breakpoint
diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S
index c3a2335..ec755d3 100644
--- a/arch/tile/kernel/intvec_64.S
+++ b/arch/tile/kernel/intvec_64.S
@@ -511,12 +511,10 @@ intvec_\vecname:
 	.else
 	.ifc \c_routine, op_handle_perf_interrupt
 	mfspr   r2, PERF_COUNT_STS
-#if CHIP_HAS_AUX_PERF_COUNTERS()
 	.else
 	.ifc \c_routine, op_handle_aux_perf_interrupt
 	mfspr   r2, AUX_PERF_COUNT_STS
 	.endif
-#endif
 	.endif
 	.endif
 	.endif
diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c
index 0e6c521..d8ba060 100644
--- a/arch/tile/kernel/irq.c
+++ b/arch/tile/kernel/irq.c
@@ -74,7 +74,7 @@ static DEFINE_SPINLOCK(available_irqs_lock);
 
 /*
  * The interrupt handling path, implemented in terms of HV interrupt
- * emulation on TILE64 and TILEPro, and IPI hardware on TILE-Gx.
+ * emulation on TILEPro, and IPI hardware on TILE-Gx.
  * Entered with interrupts disabled.
  */
 void tile_dev_intr(struct pt_regs *regs, int intnum)
@@ -235,7 +235,7 @@ void tile_irq_activate(unsigned int irq, int tile_irq_type)
 {
 	/*
 	 * We use handle_level_irq() by default because the pending
-	 * interrupt vector (whether modeled by the HV on TILE64 and
+	 * interrupt vector (whether modeled by the HV on
 	 * TILEPro or implemented in hardware on TILE-Gx) has
 	 * level-style semantics for each bit.  An interrupt fires
 	 * whenever a bit is high, not just at edges.
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 44cdc4a..16ed589 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -187,16 +187,8 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 	memset(&p->thread.dma_async_tlb, 0, sizeof(struct async_tlb));
 #endif
 
-#if CHIP_HAS_SN_PROC()
-	/* Likewise, the new thread is not running static processor code. */
-	p->thread.sn_proc_running = 0;
-	memset(&p->thread.sn_async_tlb, 0, sizeof(struct async_tlb));
-#endif
-
-#if CHIP_HAS_PROC_STATUS_SPR()
 	/* New thread has its miscellaneous processor state bits clear. */
 	p->thread.proc_status = 0;
-#endif
 
 #ifdef CONFIG_HARDWALL
 	/* New thread does not own any networks. */
@@ -378,15 +370,11 @@ static void save_arch_state(struct thread_struct *t)
 	t->system_save[2] = __insn_mfspr(SPR_SYSTEM_SAVE_0_2);
 	t->system_save[3] = __insn_mfspr(SPR_SYSTEM_SAVE_0_3);
 	t->intctrl_0 = __insn_mfspr(SPR_INTCTRL_0_STATUS);
-#if CHIP_HAS_PROC_STATUS_SPR()
 	t->proc_status = __insn_mfspr(SPR_PROC_STATUS);
-#endif
 #if !CHIP_HAS_FIXED_INTVEC_BASE()
 	t->interrupt_vector_base = __insn_mfspr(SPR_INTERRUPT_VECTOR_BASE_0);
 #endif
-#if CHIP_HAS_TILE_RTF_HWM()
 	t->tile_rtf_hwm = __insn_mfspr(SPR_TILE_RTF_HWM);
-#endif
 #if CHIP_HAS_DSTREAM_PF()
 	t->dstream_pf = __insn_mfspr(SPR_DSTREAM_PF);
 #endif
@@ -407,15 +395,11 @@ static void restore_arch_state(const struct thread_struct *t)
 	__insn_mtspr(SPR_SYSTEM_SAVE_0_2, t->system_save[2]);
 	__insn_mtspr(SPR_SYSTEM_SAVE_0_3, t->system_save[3]);
 	__insn_mtspr(SPR_INTCTRL_0_STATUS, t->intctrl_0);
-#if CHIP_HAS_PROC_STATUS_SPR()
 	__insn_mtspr(SPR_PROC_STATUS, t->proc_status);
-#endif
 #if !CHIP_HAS_FIXED_INTVEC_BASE()
 	__insn_mtspr(SPR_INTERRUPT_VECTOR_BASE_0, t->interrupt_vector_base);
 #endif
-#if CHIP_HAS_TILE_RTF_HWM()
 	__insn_mtspr(SPR_TILE_RTF_HWM, t->tile_rtf_hwm);
-#endif
 #if CHIP_HAS_DSTREAM_PF()
 	__insn_mtspr(SPR_DSTREAM_PF, t->dstream_pf);
 #endif
@@ -424,26 +408,11 @@ static void restore_arch_state(const struct thread_struct *t)
 
 void _prepare_arch_switch(struct task_struct *next)
 {
-#if CHIP_HAS_SN_PROC()
-	int snctl;
-#endif
 #if CHIP_HAS_TILE_DMA()
 	struct tile_dma_state *dma = &current->thread.tile_dma_state;
 	if (dma->enabled)
 		save_tile_dma_state(dma);
 #endif
-#if CHIP_HAS_SN_PROC()
-	/*
-	 * Suspend the static network processor if it was running.
-	 * We do not suspend the fabric itself, just like we don't
-	 * try to suspend the UDN.
-	 */
-	snctl = __insn_mfspr(SPR_SNCTL);
-	current->thread.sn_proc_running =
-		(snctl & SPR_SNCTL__FRZPROC_MASK) == 0;
-	if (current->thread.sn_proc_running)
-		__insn_mtspr(SPR_SNCTL, snctl | SPR_SNCTL__FRZPROC_MASK);
-#endif
 }
 
 
@@ -471,17 +440,6 @@ struct task_struct *__sched _switch_to(struct task_struct *prev,
 	/* Restore other arch state. */
 	restore_arch_state(&next->thread);
 
-#if CHIP_HAS_SN_PROC()
-	/*
-	 * Restart static network processor in the new process
-	 * if it was running before.
-	 */
-	if (next->thread.sn_proc_running) {
-		int snctl = __insn_mfspr(SPR_SNCTL);
-		__insn_mtspr(SPR_SNCTL, snctl & ~SPR_SNCTL__FRZPROC_MASK);
-	}
-#endif
-
 #ifdef CONFIG_HARDWALL
 	/* Enable or disable access to the network registers appropriately. */
 	hardwall_switch_tasks(prev, next);
@@ -523,7 +481,7 @@ int do_work_pending(struct pt_regs *regs, u32 thread_info_flags)
 		schedule();
 		return 1;
 	}
-#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC()
+#if CHIP_HAS_TILE_DMA()
 	if (thread_info_flags & _TIF_ASYNC_TLB) {
 		do_async_page_fault(regs);
 		return 1;
diff --git a/arch/tile/kernel/relocate_kernel_32.S b/arch/tile/kernel/relocate_kernel_32.S
index f7fd37b..e44fbcf 100644
--- a/arch/tile/kernel/relocate_kernel_32.S
+++ b/arch/tile/kernel/relocate_kernel_32.S
@@ -77,7 +77,6 @@ STD_ENTRY(relocate_new_kernel)
 	move	r30, sp
 	addi	sp, sp, -8
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	/*
 	 * On TILEPro, we need to flush all tiles' caches, since we may
 	 * have been doing hash-for-home caching there.  Note that we
@@ -113,7 +112,6 @@ STD_ENTRY(relocate_new_kernel)
 	}
 
 	jalr	r20
-#endif
 
 	/* r33 is destination pointer, default to zero */
 
diff --git a/arch/tile/kernel/relocate_kernel_64.S b/arch/tile/kernel/relocate_kernel_64.S
index 02bc446..d9d8cf6 100644
--- a/arch/tile/kernel/relocate_kernel_64.S
+++ b/arch/tile/kernel/relocate_kernel_64.S
@@ -78,7 +78,6 @@ STD_ENTRY(relocate_new_kernel)
 	move	r30, sp
 	addi	sp, sp, -16
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	/*
 	 * On TILE-GX, we need to flush all tiles' caches, since we may
 	 * have been doing hash-for-home caching there.  Note that we
@@ -116,7 +115,6 @@ STD_ENTRY(relocate_new_kernel)
 	shl16insli	r20, r20, hw0(hv_flush_remote)
 
 	jalr	r20
-#endif
 
 	/* r33 is destination pointer, default to zero */
 
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index b79c312..128a2d0 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -1046,9 +1046,6 @@ void __cpuinit setup_cpu(int boot)
 	arch_local_irq_unmask(INT_DMATLB_MISS);
 	arch_local_irq_unmask(INT_DMATLB_ACCESS);
 #endif
-#if CHIP_HAS_SN_PROC()
-	arch_local_irq_unmask(INT_SNITLB_MISS);
-#endif
 #ifdef __tilegx__
 	arch_local_irq_unmask(INT_SINGLE_STEP_K);
 #endif
@@ -1063,10 +1060,6 @@ void __cpuinit setup_cpu(int boot)
 	/* Static network is not restricted. */
 	__insn_mtspr(SPR_MPL_SN_ACCESS_SET_0, 1);
 #endif
-#if CHIP_HAS_SN_PROC()
-	__insn_mtspr(SPR_MPL_SN_NOTIFY_SET_0, 1);
-	__insn_mtspr(SPR_MPL_SN_CPL_SET_0, 1);
-#endif
 
 	/*
 	 * Set the MPL for interrupt control 0 & 1 to the corresponding
@@ -1291,7 +1284,6 @@ static void __init validate_va(void)
 struct cpumask __write_once cpu_lotar_map;
 EXPORT_SYMBOL(cpu_lotar_map);
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 /*
  * hash_for_home_map lists all the tiles that hash-for-home data
  * will be cached on.  Note that this may includes tiles that are not
@@ -1301,7 +1293,6 @@ EXPORT_SYMBOL(cpu_lotar_map);
  */
 struct cpumask hash_for_home_map;
 EXPORT_SYMBOL(hash_for_home_map);
-#endif
 
 /*
  * cpu_cacheable_map lists all the cpus whose caches the hypervisor can
@@ -1394,7 +1385,6 @@ static void __init setup_cpu_maps(void)
 		cpu_lotar_map = *cpu_possible_mask;
 	}
 
-#if CHIP_HAS_CBOX_HOME_MAP()
 	/* Retrieve set of CPUs used for hash-for-home caching */
 	rc = hv_inquire_tiles(HV_INQ_TILES_HFH_CACHE,
 			      (HV_VirtAddr) hash_for_home_map.bits,
@@ -1402,9 +1392,6 @@ static void __init setup_cpu_maps(void)
 	if (rc < 0)
 		early_panic("hv_inquire_tiles(HFH_CACHE) failed: rc %d\n", rc);
 	cpumask_or(&cpu_cacheable_map, cpu_possible_mask, &hash_for_home_map);
-#else
-	cpu_cacheable_map = *cpu_possible_mask;
-#endif
 }
 
 
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 5ef2e9e..de07fa7 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -546,7 +546,6 @@ void single_step_once(struct pt_regs *regs)
 			}
 			break;
 
-#if CHIP_HAS_WH64()
 		/* postincrement operations */
 		case IMM_0_OPCODE_X1:
 			switch (get_ImmOpcodeExtension_X1(bundle)) {
@@ -581,7 +580,6 @@ void single_step_once(struct pt_regs *regs)
 				break;
 			}
 			break;
-#endif /* CHIP_HAS_WH64() */
 		}
 
 		if (state->update) {