summaryrefslogtreecommitdiffstats
path: root/arch/tile/include/hv
diff options
context:
space:
mode:
authorChris Metcalf <cmetcalf@tilera.com>2010-06-25 16:41:11 -0400
committerChris Metcalf <cmetcalf@tilera.com>2010-07-06 13:34:01 -0400
commitfb702b942bf638baa6cbbbda9f76794db62921ef (patch)
treec065b0ab61cbb80b6209c725836a6864624b3c46 /arch/tile/include/hv
parentde5d9bf6541736dc7ad264d2b5cc99bc1b2ad958 (diff)
downloadop-kernel-dev-fb702b942bf638baa6cbbbda9f76794db62921ef.zip
op-kernel-dev-fb702b942bf638baa6cbbbda9f76794db62921ef.tar.gz
arch/tile: Enable more sophisticated IRQ model for 32-bit chips.
This model is based on the on-chip interrupt model used by the TILE-Gx next-generation hardware, and interacts much more cleanly with the Linux generic IRQ layer. The change includes modifications to the Tilera hypervisor, which are reflected in the hypervisor headers in arch/tile/include/arch/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'arch/tile/include/hv')
-rw-r--r--arch/tile/include/hv/hypervisor.h117
-rw-r--r--arch/tile/include/hv/pagesize.h32
2 files changed, 95 insertions, 54 deletions
diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h
index 84b3155..a90d298 100644
--- a/arch/tile/include/hv/hypervisor.h
+++ b/arch/tile/include/hv/hypervisor.h
@@ -20,12 +20,9 @@
#ifndef _TILE_HV_H
#define _TILE_HV_H
-#ifdef __tile__
#include <arch/chip.h>
-#else
-/* HACK: Allow use by "tools/cpack/". */
-#include "install/include/arch/chip.h"
-#endif
+
+#include <hv/pagesize.h>
/* Linux builds want unsigned long constants, but assembler wants numbers */
#ifdef __ASSEMBLER__
@@ -39,7 +36,6 @@
#define __HV_SIZE_ONE 1UL
#endif
-
/** The log2 of the span of a level-1 page table, in bytes.
*/
#define HV_LOG2_L1_SPAN 32
@@ -48,21 +44,11 @@
*/
#define HV_L1_SPAN (__HV_SIZE_ONE << HV_LOG2_L1_SPAN)
-/** The log2 of the size of small pages, in bytes. This value should
- * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL).
- */
-#define HV_LOG2_PAGE_SIZE_SMALL 16
-
/** The size of small pages, in bytes. This value should be verified
* at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL).
*/
#define HV_PAGE_SIZE_SMALL (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_SMALL)
-/** The log2 of the size of large pages, in bytes. This value should be
- * verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE).
- */
-#define HV_LOG2_PAGE_SIZE_LARGE 24
-
/** The size of large pages, in bytes. This value should be verified
* at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE).
*/
@@ -93,7 +79,7 @@
#define HV_DISPATCH_ENTRY_SIZE 32
/** Version of the hypervisor interface defined by this file */
-#define _HV_VERSION 10
+#define _HV_VERSION 11
/* Index into hypervisor interface dispatch code blocks.
*
@@ -253,8 +239,10 @@
/** hv_set_command_line */
#define HV_DISPATCH_SET_COMMAND_LINE 47
-/** hv_dev_register_intr_state */
-#define HV_DISPATCH_DEV_REGISTER_INTR_STATE 48
+#if !CHIP_HAS_IPI()
+
+/** hv_clear_intr */
+#define HV_DISPATCH_CLEAR_INTR 48
/** hv_enable_intr */
#define HV_DISPATCH_ENABLE_INTR 49
@@ -262,20 +250,30 @@
/** hv_disable_intr */
#define HV_DISPATCH_DISABLE_INTR 50
+/** hv_raise_intr */
+#define HV_DISPATCH_RAISE_INTR 51
+
/** hv_trigger_ipi */
-#define HV_DISPATCH_TRIGGER_IPI 51
+#define HV_DISPATCH_TRIGGER_IPI 52
+
+#endif /* !CHIP_HAS_IPI() */
/** hv_store_mapping */
-#define HV_DISPATCH_STORE_MAPPING 52
+#define HV_DISPATCH_STORE_MAPPING 53
/** hv_inquire_realpa */
-#define HV_DISPATCH_INQUIRE_REALPA 53
+#define HV_DISPATCH_INQUIRE_REALPA 54
/** hv_flush_all */
-#define HV_DISPATCH_FLUSH_ALL 54
+#define HV_DISPATCH_FLUSH_ALL 55
+
+#if CHIP_HAS_IPI()
+/** hv_get_ipi_pte */
+#define HV_DISPATCH_GET_IPI_PTE 56
+#endif
/** One more than the largest dispatch value */
-#define _HV_DISPATCH_END 55
+#define _HV_DISPATCH_END 57
#ifndef __ASSEMBLER__
@@ -484,21 +482,6 @@ typedef enum {
*/
int hv_confstr(HV_ConfstrQuery query, HV_VirtAddr buf, int len);
-/** State object used to enable and disable one-shot and level-sensitive
- * interrupts. */
-typedef struct
-{
-#if CHIP_VA_WIDTH() > 32
- __hv64 opaque[2]; /**< No user-serviceable parts inside */
-#else
- __hv32 opaque[2]; /**< No user-serviceable parts inside */
-#endif
-}
-HV_IntrState;
-
-/** A set of interrupts. */
-typedef __hv32 HV_IntrMask;
-
/** Tile coordinate */
typedef struct
{
@@ -509,34 +492,51 @@ typedef struct
int y;
} HV_Coord;
+
+#if CHIP_HAS_IPI()
+
+/** Get the PTE for sending an IPI to a particular tile.
+ *
+ * @param tile Tile which will receive the IPI.
+ * @param pl Indicates which IPI registers: 0 = IPI_0, 1 = IPI_1.
+ * @param pte Filled with resulting PTE.
+ * @result Zero if no error, non-zero for invalid parameters.
+ */
+int hv_get_ipi_pte(HV_Coord tile, int pl, HV_PTE* pte);
+
+#else /* !CHIP_HAS_IPI() */
+
+/** A set of interrupts. */
+typedef __hv32 HV_IntrMask;
+
/** The low interrupt numbers are reserved for use by the client in
* delivering IPIs. Any interrupt numbers higher than this value are
* reserved for use by HV device drivers. */
#define HV_MAX_IPI_INTERRUPT 7
-/** Register an interrupt state object. This object is used to enable and
- * disable one-shot and level-sensitive interrupts. Once the state is
- * registered, the client must not read or write the state object; doing
- * so will cause undefined results.
+/** Enable a set of device interrupts.
*
- * @param intr_state Pointer to interrupt state object.
- * @return HV_OK on success, or a hypervisor error code.
+ * @param enab_mask Bitmap of interrupts to enable.
*/
-HV_Errno hv_dev_register_intr_state(HV_IntrState* intr_state);
+void hv_enable_intr(HV_IntrMask enab_mask);
-/** Enable a set of one-shot and level-sensitive interrupts.
+/** Disable a set of device interrupts.
*
- * @param intr_state Pointer to interrupt state object.
- * @param enab_mask Bitmap of interrupts to enable.
+ * @param disab_mask Bitmap of interrupts to disable.
*/
-void hv_enable_intr(HV_IntrState* intr_state, HV_IntrMask enab_mask);
+void hv_disable_intr(HV_IntrMask disab_mask);
-/** Disable a set of one-shot and level-sensitive interrupts.
+/** Clear a set of device interrupts.
*
- * @param intr_state Pointer to interrupt state object.
- * @param disab_mask Bitmap of interrupts to disable.
+ * @param clear_mask Bitmap of interrupts to clear.
*/
-void hv_disable_intr(HV_IntrState* intr_state, HV_IntrMask disab_mask);
+void hv_clear_intr(HV_IntrMask clear_mask);
+
+/** Assert a set of device interrupts.
+ *
+ * @param assert_mask Bitmap of interrupts to clear.
+ */
+void hv_assert_intr(HV_IntrMask assert_mask);
/** Trigger a one-shot interrupt on some tile
*
@@ -547,6 +547,8 @@ void hv_disable_intr(HV_IntrState* intr_state, HV_IntrMask disab_mask);
*/
HV_Errno hv_trigger_ipi(HV_Coord tile, int interrupt);
+#endif // !CHIP_HAS_IPI()
+
/** Store memory mapping in debug memory so that external debugger can read it.
* A maximum of 16 entries can be stored.
*
@@ -1010,6 +1012,13 @@ int hv_console_write(HV_VirtAddr bytes, int len);
* it will return to the code which was interrupted by the INTCTRL_1
* interrupt.
*
+ * Under some circumstances, the firing of INTCTRL_1 can race with
+ * the lowering of a device interrupt. In such a case, the
+ * hv_downcall_dispatch service may issue an iret instruction instead
+ * of entering one of the client's actual downcall-handling interrupt
+ * vectors. This will return execution to the location that was
+ * interrupted by INTCTRL_1.
+ *
* Any saving of registers should be done by the actual handling
* vectors; no registers should be changed by the INTCTRL_1 handler.
* In particular, the client should not use a jal instruction to invoke
diff --git a/arch/tile/include/hv/pagesize.h b/arch/tile/include/hv/pagesize.h
new file mode 100644
index 0000000..58bed11
--- /dev/null
+++ b/arch/tile/include/hv/pagesize.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file pagesize.h
+ */
+
+#ifndef _HV_PAGESIZE_H
+#define _HV_PAGESIZE_H
+
+/** The log2 of the size of small pages, in bytes. This value should
+ * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL).
+ */
+#define HV_LOG2_PAGE_SIZE_SMALL 16
+
+/** The log2 of the size of large pages, in bytes. This value should be
+ * verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE).
+ */
+#define HV_LOG2_PAGE_SIZE_LARGE 24
+
+#endif /* _HV_PAGESIZE_H */
OpenPOWER on IntegriCloud