[SPARC64]: Fix several kprobes bugs.

- relbranch_fixup(), for non-branches, would end up setting
  regs->tnpc incorrectly, in fact it would set it equal to
  regs->tpc which would cause that instruction to execute twice

  Also, if this is not a PC-relative branch, we should just
  leave regs->tnpc as-is.  This covers cases like 'jmpl' which
  branch to absolute values.

- To be absolutely %100 safe, we need to flush the instruction
  cache for all assignments to kprobe->ainsn.insn[], including
  cases like add_aggr_kprobe()

- prev_kprobe's status field needs to be 'unsigned long' to match
  the type of the value it is saving

- jprobes were totally broken:
  = jprobe_return() can run in the stack frame of the jprobe handler,
    or in an even deeper stack frame, thus we'll be in the wrong
    register window than the one from the original probe state.

    So unwind using 'restore' instructions, if necessary, right
    before we do the jprobe_return() breakpoint trap.

  = There is no reason to save/restore the register window saved
    at %sp at jprobe trigger time.  Those registers cannot be
    modified by the jprobe handler.  Also, this code was saving
    and restoring "sizeof (struct sparc_stackf)" bytes.  Depending
    upon the caller, this could clobber unrelated stack frame
    pieces if there is only a basic 128-byte register window
    stored on the stack, without the argument save area.

    So just saving and restoring struct pt_regs is sufficient.

  = Kill the "jprobe_saved_esp", totally unused.

    Also, delete "jprobe_saved_regs_location", with the stack frame
    unwind now done explicitly by jprobe_return(), this check is
    superfluous.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 43 insertions, 48 deletions

diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c
index 8e75ed7..ae221f0 100644
--- a/arch/sparc64/kernel/kprobes.c
+++ b/arch/sparc64/kernel/kprobes.c
@@ -45,7 +45,11 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
 	p->ainsn.insn[0] = *p->addr;
+	flushi(&p->ainsn.insn[0]);
+
 	p->ainsn.insn[1] = BREAKPOINT_INSTRUCTION_2;
+	flushi(&p->ainsn.insn[1]);
+
 	p->opcode = *p->addr;
 	return 0;
 }
@@ -185,16 +189,19 @@ no_kprobe:
 /* If INSN is a relative control transfer instruction,
  * return the corrected branch destination value.
  *
- * The original INSN location was REAL_PC, it actually
- * executed at PC and produced destination address NPC.
+ * regs->tpc and regs->tnpc still hold the values of the
+ * program counters at the time of trap due to the execution
+ * of the BREAKPOINT_INSTRUCTION_2 at p->ainsn.insn[1]
+ * 
  */
-static unsigned long __kprobes relbranch_fixup(u32 insn, unsigned long real_pc,
-					       unsigned long pc,
-					       unsigned long npc)
+static unsigned long __kprobes relbranch_fixup(u32 insn, struct kprobe *p,
+					       struct pt_regs *regs)
 {
+	unsigned long real_pc = (unsigned long) p->addr;
+
 	/* Branch not taken, no mods necessary.  */
-	if (npc == pc + 0x4UL)
-		return real_pc + 0x4UL;
+	if (regs->tnpc == regs->tpc + 0x4UL)
+		return real_pc + 0x8UL;
 
 	/* The three cases are call, branch w/prediction,
 	 * and traditional branch.
@@ -202,14 +209,21 @@ static unsigned long __kprobes relbranch_fixup(u32 insn, unsigned long real_pc,
 	if ((insn & 0xc0000000) == 0x40000000 ||
 	    (insn & 0xc1c00000) == 0x00400000 ||
 	    (insn & 0xc1c00000) == 0x00800000) {
+		unsigned long ainsn_addr;
+
+		ainsn_addr = (unsigned long) &p->ainsn.insn[0];
+
 		/* The instruction did all the work for us
 		 * already, just apply the offset to the correct
 		 * instruction location.
 		 */
-		return (real_pc + (npc - pc));
+		return (real_pc + (regs->tnpc - ainsn_addr));
 	}
 
-	return real_pc + 0x4UL;
+	/* It is jmpl or some other absolute PC modification instruction,
+	 * leave NPC as-is.
+	 */
+	return regs->tnpc;
 }
 
 /* If INSN is an instruction which writes it's PC location
@@ -220,12 +234,12 @@ static void __kprobes retpc_fixup(struct pt_regs *regs, u32 insn,
 {
 	unsigned long *slot = NULL;
 
-	/* Simplest cast is call, which always uses %o7 */
+	/* Simplest case is 'call', which always uses %o7 */
 	if ((insn & 0xc0000000) == 0x40000000) {
 		slot = &regs->u_regs[UREG_I7];
 	}
 
-	/* Jmpl encodes the register inside of the opcode */
+	/* 'jmpl' encodes the register inside of the opcode */
 	if ((insn & 0xc1f80000) == 0x81c00000) {
 		unsigned long rd = ((insn >> 25) & 0x1f);
 
@@ -247,11 +261,11 @@ static void __kprobes retpc_fixup(struct pt_regs *regs, u32 insn,
 
 /*
  * Called after single-stepping.  p->addr is the address of the
- * instruction whose first byte has been replaced by the breakpoint
+ * instruction which has been replaced by the breakpoint
  * instruction.  To avoid the SMP problems that can occur when we
  * temporarily put back the original opcode to single-step, we
  * single-stepped a copy of the instruction.  The address of this
- * copy is p->ainsn.insn.
+ * copy is &p->ainsn.insn[0].
  *
  * This function prepares to return from the post-single-step
  * breakpoint trap.
@@ -261,11 +275,11 @@ static void __kprobes resume_execution(struct kprobe *p,
 {
 	u32 insn = p->ainsn.insn[0];
 
+	regs->tnpc = relbranch_fixup(insn, p, regs);
+
+	/* This assignment must occur after relbranch_fixup() */
 	regs->tpc = kcb->kprobe_orig_tnpc;
-	regs->tnpc = relbranch_fixup(insn,
-				     (unsigned long) p->addr,
-				     (unsigned long) &p->ainsn.insn[0],
-				     regs->tnpc);
+
 	retpc_fixup(regs, insn, (unsigned long) p->addr);
 
 	regs->tstate = ((regs->tstate & ~TSTATE_PIL) |
@@ -430,17 +444,8 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 	struct jprobe *jp = container_of(p, struct jprobe, kp);
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 
-	kcb->jprobe_saved_regs_location = regs;
 	memcpy(&(kcb->jprobe_saved_regs), regs, sizeof(*regs));
 
-	/* Save a whole stack frame, this gets arguments
-	 * pushed onto the stack after using up all the
-	 * arg registers.
-	 */
-	memcpy(&(kcb->jprobe_saved_stack),
-	       (char *) (regs->u_regs[UREG_FP] + STACK_BIAS),
-	       sizeof(kcb->jprobe_saved_stack));
-
 	regs->tpc  = (unsigned long) jp->entry;
 	regs->tnpc = ((unsigned long) jp->entry) + 0x4UL;
 	regs->tstate |= TSTATE_PIL;
@@ -450,10 +455,19 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 
 void __kprobes jprobe_return(void)
 {
-	__asm__ __volatile__(
-		".globl	jprobe_return_trap_instruction\n"
+	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	register unsigned long orig_fp asm("g1");
+
+	orig_fp = kcb->jprobe_saved_regs.u_regs[UREG_FP];
+	__asm__ __volatile__("\n"
+"1:	cmp		%%sp, %0\n\t"
+	"blu,a,pt	%%xcc, 1b\n\t"
+	" restore\n\t"
+	".globl		jprobe_return_trap_instruction\n"
 "jprobe_return_trap_instruction:\n\t"
-		"ta 0x70");
+	"ta		0x70"
+	: /* no outputs */
+	: "r" (orig_fp));
 }
 
 extern void jprobe_return_trap_instruction(void);
@@ -466,26 +480,7 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 
 	if (addr == (u32 *) jprobe_return_trap_instruction) {
-		if (kcb->jprobe_saved_regs_location != regs) {
-			printk("JPROBE: Current regs (%p) does not match "
-			       "saved regs (%p).\n",
-			       regs, kcb->jprobe_saved_regs_location);
-			printk("JPROBE: Saved registers\n");
-			__show_regs(kcb->jprobe_saved_regs_location);
-			printk("JPROBE: Current registers\n");
-			__show_regs(regs);
-			BUG();
-		}
-		/* Restore old register state.  Do pt_regs
-		 * first so that UREG_FP is the original one for
-		 * the stack frame restore.
-		 */
 		memcpy(regs, &(kcb->jprobe_saved_regs), sizeof(*regs));
-
-		memcpy((char *) (regs->u_regs[UREG_FP] + STACK_BIAS),
-		       &(kcb->jprobe_saved_stack),
-		       sizeof(kcb->jprobe_saved_stack));
-
 		preempt_enable_no_resched();
 		return 1;
 	}