summaryrefslogtreecommitdiffstats
path: root/arch/sparc/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/sparc/Kconfig
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/sparc/Kconfig')
-rw-r--r--arch/sparc/Kconfig393
1 files changed, 393 insertions, 0 deletions
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
new file mode 100644
index 0000000..237f922
--- /dev/null
+++ b/arch/sparc/Kconfig
@@ -0,0 +1,393 @@
+# $Id: config.in,v 1.113 2002/01/24 22:14:44 davem Exp $
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux/SPARC Kernel Configuration"
+
+config MMU
+ bool
+ default y
+
+config UID16
+ bool
+ default y
+
+config HIGHMEM
+ bool
+ default y
+
+config GENERIC_ISA_DMA
+ bool
+ default y
+
+source "init/Kconfig"
+
+menu "General machine setup"
+
+config VT
+ bool
+ select INPUT
+ default y
+ ---help---
+ If you say Y here, you will get support for terminal devices with
+ display and keyboard devices. These are called "virtual" because you
+ can run several virtual terminals (also called virtual consoles) on
+ one physical terminal. This is rather useful, for example one
+ virtual terminal can collect system messages and warnings, another
+ one can be used for a text-mode user session, and a third could run
+ an X session, all in parallel. Switching between virtual terminals
+ is done with certain key combinations, usually Alt-<function key>.
+
+ The setterm command ("man setterm") can be used to change the
+ properties (such as colors or beeping) of a virtual terminal. The
+ man page console_codes(4) ("man console_codes") contains the special
+ character sequences that can be used to change those properties
+ directly. The fonts used on virtual terminals can be changed with
+ the setfont ("man setfont") command and the key bindings are defined
+ with the loadkeys ("man loadkeys") command.
+
+ You need at least one virtual terminal device in order to make use
+ of your keyboard and monitor. Therefore, only people configuring an
+ embedded system would want to say N here in order to save some
+ memory; the only way to log into such a system is then via a serial
+ or network connection.
+
+ If unsure, say Y, or else you won't be able to do much with your new
+ shiny Linux system :-)
+
+config VT_CONSOLE
+ bool
+ default y
+ ---help---
+ The system console is the device which receives all kernel messages
+ and warnings and which allows logins in single user mode. If you
+ answer Y here, a virtual terminal (the device used to interact with
+ a physical terminal) can be used as system console. This is the most
+ common mode of operations, so you should say Y here unless you want
+ the kernel messages be output only to a serial port (in which case
+ you should say Y to "Console on serial port", below).
+
+ If you do say Y here, by default the currently visible virtual
+ terminal (/dev/tty0) will be used as system console. You can change
+ that with a kernel command line option such as "console=tty3" which
+ would use the third virtual terminal as system console. (Try "man
+ bootparam" or see the documentation of your boot loader (lilo or
+ loadlin) about how to pass options to the kernel at boot time.)
+
+ If unsure, say Y.
+
+config HW_CONSOLE
+ bool
+ default y
+
+config SMP
+ bool "Symmetric multi-processing support (does not work on sun4/sun4c)"
+ depends on BROKEN
+ ---help---
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, say N. If you have a system with more
+ than one CPU, say Y.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on many, but not all,
+ singleprocessor machines. On a singleprocessor machine, the kernel
+ will run faster if you say N here.
+
+ People using multiprocessor machines who say Y here should also say
+ Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+ Management" code will be disabled if you say Y here.
+
+ See also the <file:Documentation/smp.txt>,
+ <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+ <http://www.tldp.org/docs.html#howto>.
+
+ If you don't know what to do here, say N.
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-32)"
+ range 2 32
+ depends on SMP
+ default "32"
+
+# Identify this as a Sparc32 build
+config SPARC32
+ bool
+ default y
+ help
+ SPARC is a family of RISC microprocessors designed and marketed by
+ Sun Microsystems, incorporated. They are very widely found in Sun
+ workstations and clones. This port covers the original 32-bit SPARC;
+ it is old and stable and usually considered one of the "big three"
+ along with the Intel and Alpha ports. The UltraLinux project
+ maintains both the SPARC32 and SPARC64 ports; its web page is
+ available at <http://www.ultralinux.org/>.
+
+# Global things across all Sun machines.
+config ISA
+ bool
+ help
+ ISA is found on Espresso only and is not supported currently.
+ Say N
+
+config EISA
+ bool
+ help
+ EISA is not supported.
+ Say N
+
+config MCA
+ bool
+ help
+ MCA is not supported.
+ Say N
+
+config PCMCIA
+ tristate
+ ---help---
+ Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
+ computer. These are credit-card size devices such as network cards,
+ modems or hard drives often used with laptops computers. There are
+ actually two varieties of these cards: the older 16 bit PCMCIA cards
+ and the newer 32 bit CardBus cards. If you want to use CardBus
+ cards, you need to say Y here and also to "CardBus support" below.
+
+ To use your PC-cards, you will need supporting software from David
+ Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+ for location). Please also read the PCMCIA-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as modules, choose M here: the
+ modules will be called pcmcia_core and ds.
+
+config SBUS
+ bool
+ default y
+
+config SBUSCHAR
+ bool
+ default y
+
+config SERIAL_CONSOLE
+ bool
+ default y
+ ---help---
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode). This could be useful if some terminal or printer is connected
+ to that serial port.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyS1". (Try "man bootparam" or see the documentation of
+ your boot loader (silo) about how to pass options to the kernel at
+ boot time.)
+
+ If you don't have a graphics card installed and you say Y here, the
+ kernel will automatically use the first serial line, /dev/ttyS0, as
+ system console.
+
+ If unsure, say N.
+
+config SUN_AUXIO
+ bool
+ default y
+
+config SUN_IO
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config SUN_PM
+ bool
+ default y
+ help
+ Enable power management and CPU standby features on supported
+ SPARC platforms.
+
+config SUN4
+ bool "Support for SUN4 machines (disables SUN4[CDM] support)"
+ depends on !SMP
+ default n
+ help
+ Say Y here if, and only if, your machine is a sun4. Note that
+ a kernel compiled with this option will run only on sun4.
+ (And the current version will probably work only on sun4/330.)
+
+if !SUN4
+
+config PCI
+ bool "Support for PCI and PS/2 keyboard/mouse"
+ help
+ CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
+ CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
+ All of these platforms are extremely obscure, so say N if unsure.
+
+source "drivers/pci/Kconfig"
+
+endif
+
+config SUN_OPENPROMFS
+ tristate "Openprom tree appears in /proc/openprom"
+ help
+ If you say Y, the OpenPROM device tree will be available as a
+ virtual file system, which you can mount to /proc/openprom by "mount
+ -t openpromfs none /proc/openprom".
+
+ To compile the /proc/openprom support as a module, choose M here: the
+ module will be called openpromfs.
+
+ Only choose N if you know in advance that you will not need to modify
+ OpenPROM settings on the running system.
+
+source "fs/Kconfig.binfmt"
+
+config SUNOS_EMUL
+ bool "SunOS binary emulation"
+ help
+ This allows you to run most SunOS binaries. If you want to do this,
+ say Y here and place appropriate files in /usr/gnemul/sunos. See
+ <http://www.ultralinux.org/faq.html> for more information. If you
+ want to run SunOS binaries on an Ultra you must also say Y to
+ "Kernel support for 32-bit a.out binaries" above.
+
+source "drivers/parport/Kconfig"
+
+config PRINTER
+ tristate "Parallel printer support"
+ depends on PARPORT
+ ---help---
+ If you intend to attach a printer to the parallel port of your Linux
+ box (as opposed to using a serial printer; if the connector at the
+ printer has 9 or 25 holes ["female"], then it's serial), say Y.
+ Also read the Printing-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ It is possible to share one parallel port among several devices
+ (e.g. printer and ZIP drive) and it is safe to compile the
+ corresponding drivers into the kernel. If you want to compile this
+ driver as a module however, choose M here and read
+ <file:Documentation/parport.txt>. The module will be called lp.
+
+ If you have several parallel ports, you can specify which ports to
+ use with the "lp" kernel command line option. (Try "man bootparam"
+ or see the documentation of your boot loader (silo) about how to pass
+ options to the kernel at boot time.) The syntax of the "lp" command
+ line option can be found in <file:drivers/char/lp.c>.
+
+ If you have more than 8 printers, you need to increase the LP_NO
+ macro in lp.c and the PARPORT_MAX macro in parport.h.
+
+endmenu
+
+source "drivers/base/Kconfig"
+
+source "drivers/video/Kconfig"
+
+source "drivers/mtd/Kconfig"
+
+source "drivers/serial/Kconfig"
+
+if !SUN4
+source "drivers/sbus/char/Kconfig"
+endif
+
+source "drivers/block/Kconfig"
+
+# Don't frighten a common SBus user
+if PCI
+
+source "drivers/ide/Kconfig"
+
+endif
+
+source "drivers/isdn/Kconfig"
+
+source "drivers/scsi/Kconfig"
+
+source "drivers/fc4/Kconfig"
+
+source "drivers/md/Kconfig"
+
+source "net/Kconfig"
+
+# This one must be before the filesystem configs. -DaveM
+
+menu "Unix98 PTY support"
+
+config UNIX98_PTYS
+ bool "Unix98 PTY support"
+ ---help---
+ A pseudo terminal (PTY) is a software device consisting of two
+ halves: a master and a slave. The slave device behaves identical to
+ a physical terminal; the master device is used by a process to
+ read data from and write data to the slave, thereby emulating a
+ terminal. Typical programs for the master side are telnet servers
+ and xterms.
+
+ Linux has traditionally used the BSD-like names /dev/ptyxx for
+ masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
+ has a number of problems. The GNU C library glibc 2.1 and later,
+ however, supports the Unix98 naming standard: in order to acquire a
+ pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
+ terminal is then made available to the process and the pseudo
+ terminal slave can be accessed as /dev/pts/<number>. What was
+ traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
+
+ The entries in /dev/pts/ are created on the fly by a virtual
+ file system; therefore, if you say Y here you should say Y to
+ "/dev/pts file system for Unix98 PTYs" as well.
+
+ If you want to say Y here, you need to have the C library glibc 2.1
+ or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
+ Read the instructions in <file:Documentation/Changes> pertaining to
+ pseudo terminals. It's safe to say N.
+
+config UNIX98_PTY_COUNT
+ int "Maximum number of Unix98 PTYs in use (0-2048)"
+ depends on UNIX98_PTYS
+ default "256"
+ help
+ The maximum number of Unix98 PTYs that can be used at any one time.
+ The default is 256, and should be enough for desktop systems. Server
+ machines which support incoming telnet/rlogin/ssh connections and/or
+ serve several X terminals may want to increase this: every incoming
+ connection and every xterm uses up one PTY.
+
+ When not in use, each additional set of 256 PTYs occupy
+ approximately 8 KB of kernel memory on 32-bit architectures.
+
+endmenu
+
+source "drivers/input/Kconfig"
+
+source "fs/Kconfig"
+
+source "sound/Kconfig"
+
+source "drivers/usb/Kconfig"
+
+source "drivers/infiniband/Kconfig"
+
+source "drivers/char/watchdog/Kconfig"
+
+source "arch/sparc/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
OpenPOWER on IntegriCloud