diff options
author | Paul Mundt <lethal@linux-sh.org> | 2007-11-21 23:27:52 +0900 |
---|---|---|
committer | Paul Mundt <lethal@linux-sh.org> | 2008-01-28 13:18:55 +0900 |
commit | b4eaa1cc7ce8203ac9af9184c49c635ce79592b1 (patch) | |
tree | 83d71382fed9cc992cd6a1c23e6ec28fef304f2a /arch/sh64/kernel/pci_sh5.c | |
parent | 18bc81319b438ae3266e1b2653ce874912dae891 (diff) | |
download | op-kernel-dev-b4eaa1cc7ce8203ac9af9184c49c635ce79592b1.zip op-kernel-dev-b4eaa1cc7ce8203ac9af9184c49c635ce79592b1.tar.gz |
sh: Kill off the rest of arch/sh64/kernel/.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/sh64/kernel/pci_sh5.c')
-rw-r--r-- | arch/sh64/kernel/pci_sh5.c | 536 |
1 files changed, 0 insertions, 536 deletions
diff --git a/arch/sh64/kernel/pci_sh5.c b/arch/sh64/kernel/pci_sh5.c deleted file mode 100644 index b4d9534..0000000 --- a/arch/sh64/kernel/pci_sh5.c +++ /dev/null @@ -1,536 +0,0 @@ -/* - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * Copyright (C) 2003, 2004 Paul Mundt - * Copyright (C) 2004 Richard Curnow - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * Support functions for the SH5 PCI hardware. - */ - -#include <linux/kernel.h> -#include <linux/rwsem.h> -#include <linux/smp.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/types.h> -#include <asm/pci.h> -#include <linux/irq.h> - -#include <asm/io.h> -#include <asm/hardware.h> -#include "pci_sh5.h" - -static unsigned long pcicr_virt; -unsigned long pciio_virt; - -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - printk("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - -char * __devinit pcibios_setup(char *str) -{ - return str; -} - -/* Rounds a number UP to the nearest power of two. Used for - * sizing the PCI window. - */ -static u32 __init r2p2(u32 num) -{ - int i = 31; - u32 tmp = num; - - if (num == 0) - return 0; - - do { - if (tmp & (1 << 31)) - break; - i--; - tmp <<= 1; - } while (i >= 0); - - tmp = 1 << i; - /* If the original number isn't a power of 2, round it up */ - if (tmp != num) - tmp <<= 1; - - return tmp; -} - -extern unsigned long long memory_start, memory_end; - -int __init sh5pci_init(unsigned memStart, unsigned memSize) -{ - u32 lsr0; - u32 uval; - - pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR"); - if (!pcicr_virt) { - panic("Unable to remap PCICR\n"); - } - - pciio_virt = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO"); - if (!pciio_virt) { - panic("Unable to remap PCIIO\n"); - } - - pr_debug("Register base addres is 0x%08lx\n", pcicr_virt); - - /* Clear snoop registers */ - SH5PCI_WRITE(CSCR0, 0); - SH5PCI_WRITE(CSCR1, 0); - - pr_debug("Wrote to reg\n"); - - /* Switch off interrupts */ - SH5PCI_WRITE(INTM, 0); - SH5PCI_WRITE(AINTM, 0); - SH5PCI_WRITE(PINTM, 0); - - /* Set bus active, take it out of reset */ - uval = SH5PCI_READ(CR); - - /* Set command Register */ - SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | CR_PFCS | CR_BMAM); - - uval=SH5PCI_READ(CR); - pr_debug("CR is actually 0x%08x\n",uval); - - /* Allow it to be a master */ - /* NB - WE DISABLE I/O ACCESS to stop overlap */ - /* set WAIT bit to enable stepping, an attempt to improve stability */ - SH5PCI_WRITE_SHORT(CSR_CMD, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_WAIT); - - /* - ** Set translation mapping memory in order to convert the address - ** used for the main bus, to the PCI internal address. - */ - SH5PCI_WRITE(MBR,0x40000000); - - /* Always set the max size 512M */ - SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024)); - - /* - ** I/O addresses are mapped at internal PCI specific address - ** as is described into the configuration bridge table. - ** These are changed to 0, to allow cards that have legacy - ** io such as vga to function correctly. We set the SH5 IOBAR to - ** 256K, which is a bit big as we can only have 64K of address space - */ - - SH5PCI_WRITE(IOBR,0x0); - - pr_debug("PCI:Writing 0x%08x to IOBR\n",0); - - /* Set up a 256K window. Totally pointless waste of address space */ - SH5PCI_WRITE(IOBMR,0); - pr_debug("PCI:Writing 0x%08x to IOBMR\n",0); - - /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. Ideally, - * we would want to map the I/O region somewhere, but it is so big this is not - * that easy! - */ - SH5PCI_WRITE(CSR_IBAR0,~0); - /* Set memory size value */ - memSize = memory_end - memory_start; - - /* Now we set up the mbars so the PCI bus can see the memory of the machine */ - if (memSize < (1024 * 1024)) { - printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%x?\n", memSize); - return -EINVAL; - } - - /* Set LSR 0 */ - lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : ((r2p2(memSize) - 0x100000) | 0x1); - SH5PCI_WRITE(LSR0, lsr0); - - pr_debug("PCI:Writing 0x%08x to LSR0\n",lsr0); - - /* Set MBAR 0 */ - SH5PCI_WRITE(CSR_MBAR0, memory_start); - SH5PCI_WRITE(LAR0, memory_start); - - SH5PCI_WRITE(CSR_MBAR1,0); - SH5PCI_WRITE(LAR1,0); - SH5PCI_WRITE(LSR1,0); - - pr_debug("PCI:Writing 0x%08llx to CSR_MBAR0\n",memory_start); - pr_debug("PCI:Writing 0x%08llx to LAR0\n",memory_start); - - /* Enable the PCI interrupts on the device */ - SH5PCI_WRITE(INTM, ~0); - SH5PCI_WRITE(AINTM, ~0); - SH5PCI_WRITE(PINTM, ~0); - - pr_debug("Switching on all error interrupts\n"); - - return(0); -} - -static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *val) -{ - SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - - switch (size) { - case 1: - *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3)); - break; - case 2: - *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2)); - break; - case 4: - *val = SH5PCI_READ(PDR); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - - switch (size) { - case 1: - SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val); - break; - case 2: - SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val); - break; - case 4: - SH5PCI_WRITE(PDR, val); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops pci_config_ops = { - .read = sh5pci_read, - .write = sh5pci_write, -}; - -/* Everything hangs off this */ -static struct pci_bus *pci_root_bus; - - -static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin) -{ - pr_debug("swizzle for dev %d on bus %d slot %d pin is %d\n", - dev->devfn,dev->bus->number, PCI_SLOT(dev->devfn),*pin); - return PCI_SLOT(dev->devfn); -} - -static inline u8 bridge_swizzle(u8 pin, u8 slot) -{ - return (((pin-1) + slot) % 4) + 1; -} - -u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp) -{ - if (dev->bus->number != 0) { - u8 pin = *pinp; - do { - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); - /* Move up the chain of bridges. */ - dev = dev->bus->self; - } while (dev->bus->self); - *pinp = pin; - - /* The slot is the slot of the last bridge. */ - } - - return PCI_SLOT(dev->devfn); -} - -/* This needs to be shunted out of here into the board specific bit */ - -static int __init map_cayman_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int result = -1; - - /* The complication here is that the PCI IRQ lines from the Cayman's 2 - 5V slots get into the CPU via a different path from the IRQ lines - from the 3 3.3V slots. Thus, we have to detect whether the card's - interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling' - at the point where we cross from 5V to 3.3V is not the normal case. - - The added complication is that we don't know that the 5V slots are - always bus 2, because a card containing a PCI-PCI bridge may be - plugged into a 3.3V slot, and this changes the bus numbering. - - Also, the Cayman has an intermediate PCI bus that goes a custom - expansion board header (and to the secondary bridge). This bus has - never been used in practice. - - The 1ary onboard PCI-PCI bridge is device 3 on bus 0 - The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of the 1ary bridge. - */ - - struct slot_pin { - int slot; - int pin; - } path[4]; - int i=0; - - while (dev->bus->number > 0) { - - slot = path[i].slot = PCI_SLOT(dev->devfn); - pin = path[i].pin = bridge_swizzle(pin, slot); - dev = dev->bus->self; - i++; - if (i > 3) panic("PCI path to root bus too long!\n"); - } - - slot = PCI_SLOT(dev->devfn); - /* This is the slot on bus 0 through which the device is eventually - reachable. */ - - /* Now work back up. */ - if ((slot < 3) || (i == 0)) { - /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final - swizzle now. */ - result = IRQ_INTA + bridge_swizzle(pin, slot) - 1; - } else { - i--; - slot = path[i].slot; - pin = path[i].pin; - if (slot > 0) { - panic("PCI expansion bus device found - not handled!\n"); - } else { - if (i > 0) { - /* 5V slots */ - i--; - slot = path[i].slot; - pin = path[i].pin; - /* 'pin' was swizzled earlier wrt slot, don't do it again. */ - result = IRQ_P2INTA + (pin - 1); - } else { - /* IRQ for 2ary PCI-PCI bridge : unused */ - result = -1; - } - } - } - - return result; -} - -static irqreturn_t pcish5_err_irq(int irq, void *dev_id) -{ - struct pt_regs *regs = get_irq_regs(); - unsigned pci_int, pci_air, pci_cir, pci_aint; - - pci_int = SH5PCI_READ(INT); - pci_cir = SH5PCI_READ(CIR); - pci_air = SH5PCI_READ(AIR); - - if (pci_int) { - printk("PCI INTERRUPT (at %08llx)!\n", regs->pc); - printk("PCI INT -> 0x%x\n", pci_int & 0xffff); - printk("PCI AIR -> 0x%x\n", pci_air); - printk("PCI CIR -> 0x%x\n", pci_cir); - SH5PCI_WRITE(INT, ~0); - } - - pci_aint = SH5PCI_READ(AINT); - if (pci_aint) { - printk("PCI ARB INTERRUPT!\n"); - printk("PCI AINT -> 0x%x\n", pci_aint); - printk("PCI AIR -> 0x%x\n", pci_air); - printk("PCI CIR -> 0x%x\n", pci_cir); - SH5PCI_WRITE(AINT, ~0); - } - - return IRQ_HANDLED; -} - -static irqreturn_t pcish5_serr_irq(int irq, void *dev_id) -{ - printk("SERR IRQ\n"); - - return IRQ_NONE; -} - -static void __init -pcibios_size_bridge(struct pci_bus *bus, struct resource *ior, - struct resource *memr) -{ - struct resource io_res, mem_res; - struct pci_dev *dev; - struct pci_dev *bridge = bus->self; - struct list_head *ln; - - if (!bridge) - return; /* host bridge, nothing to do */ - - /* set reasonable default locations for pcibios_align_resource */ - io_res.start = PCIBIOS_MIN_IO; - mem_res.start = PCIBIOS_MIN_MEM; - - io_res.end = io_res.start; - mem_res.end = mem_res.start; - - /* Collect information about how our direct children are layed out. */ - for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) { - int i; - dev = pci_dev_b(ln); - - /* Skip bridges for now */ - if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI) - continue; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - struct resource res; - unsigned long size; - - memcpy(&res, &dev->resource[i], sizeof(res)); - size = res.end - res.start + 1; - - if (res.flags & IORESOURCE_IO) { - res.start = io_res.end; - pcibios_align_resource(dev, &res, size, 0); - io_res.end = res.start + size; - } else if (res.flags & IORESOURCE_MEM) { - res.start = mem_res.end; - pcibios_align_resource(dev, &res, size, 0); - mem_res.end = res.start + size; - } - } - } - - /* And for all of the subordinate busses. */ - for (ln=bus->children.next; ln != &bus->children; ln=ln->next) - pcibios_size_bridge(pci_bus_b(ln), &io_res, &mem_res); - - /* turn the ending locations into sizes (subtract start) */ - io_res.end -= io_res.start; - mem_res.end -= mem_res.start; - - /* Align the sizes up by bridge rules */ - io_res.end = ALIGN(io_res.end, 4*1024) - 1; - mem_res.end = ALIGN(mem_res.end, 1*1024*1024) - 1; - - /* Adjust the bridge's allocation requirements */ - bridge->resource[0].end = bridge->resource[0].start + io_res.end; - bridge->resource[1].end = bridge->resource[1].start + mem_res.end; - - bridge->resource[PCI_BRIDGE_RESOURCES].end = - bridge->resource[PCI_BRIDGE_RESOURCES].start + io_res.end; - bridge->resource[PCI_BRIDGE_RESOURCES+1].end = - bridge->resource[PCI_BRIDGE_RESOURCES+1].start + mem_res.end; - - /* adjust parent's resource requirements */ - if (ior) { - ior->end = ALIGN(ior->end, 4*1024); - ior->end += io_res.end; - } - - if (memr) { - memr->end = ALIGN(memr->end, 1*1024*1024); - memr->end += mem_res.end; - } -} - -static void __init pcibios_size_bridges(void) -{ - struct resource io_res, mem_res; - - memset(&io_res, 0, sizeof(io_res)); - memset(&mem_res, 0, sizeof(mem_res)); - - pcibios_size_bridge(pci_root_bus, &io_res, &mem_res); -} - -static int __init pcibios_init(void) -{ - if (request_irq(IRQ_ERR, pcish5_err_irq, - IRQF_DISABLED, "PCI Error",NULL) < 0) { - printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n"); - return -EINVAL; - } - - if (request_irq(IRQ_SERR, pcish5_serr_irq, - IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) { - printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n"); - return -EINVAL; - } - - /* The pci subsystem needs to know where memory is and how much - * of it there is. I've simply made these globals. A better mechanism - * is probably needed. - */ - sh5pci_init(__pa(memory_start), - __pa(memory_end) - __pa(memory_start)); - - pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL); - pcibios_size_bridges(); - pci_assign_unassigned_resources(); - pci_fixup_irqs(no_swizzle, map_cayman_irq); - - return 0; -} - -subsys_initcall(pcibios_init); - -void __devinit pcibios_fixup_bus(struct pci_bus *bus) -{ - struct pci_dev *dev = bus->self; - int i; - -#if 1 - if(dev) { - for(i=0; i<3; i++) { - bus->resource[i] = - &dev->resource[PCI_BRIDGE_RESOURCES+i]; - bus->resource[i]->name = bus->name; - } - bus->resource[0]->flags |= IORESOURCE_IO; - bus->resource[1]->flags |= IORESOURCE_MEM; - - /* For now, propagate host limits to the bus; - * we'll adjust them later. */ - -#if 1 - bus->resource[0]->end = 64*1024 - 1 ; - bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1; - bus->resource[0]->start = PCIBIOS_MIN_IO; - bus->resource[1]->start = PCIBIOS_MIN_MEM; -#else - bus->resource[0]->end = 0; - bus->resource[1]->end = 0; - bus->resource[0]->start =0; - bus->resource[1]->start = 0; -#endif - /* Turn off downstream PF memory address range by default */ - bus->resource[2]->start = 1024*1024; - bus->resource[2]->end = bus->resource[2]->start - 1; - } -#endif - -} - |