sh: Add SH-5 optimized memcpy()/memset()/strcpy()/strlen().

Adopted from the uClibc optimized string versions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

6 files changed, 425 insertions, 85 deletions

diff --git a/arch/sh/lib64/Makefile b/arch/sh/lib64/Makefile
index 9950966..1d932e7 100644
--- a/arch/sh/lib64/Makefile
+++ b/arch/sh/lib64/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the SH-5 specific library files..
 #
 # Copyright (C) 2000, 2001  Paolo Alberelli
-# Copyright (C) 2003  Paul Mundt
+# Copyright (C) 2003 - 2008  Paul Mundt
 #
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
@@ -10,6 +10,5 @@
 #
 
 # Panic should really be compiled as PIC
-lib-y  := udelay.o c-checksum.o dbg.o panic.o memcpy.o copy_user_memcpy.o \
-		copy_page.o clear_page.o
-
+lib-y  := udelay.o c-checksum.o dbg.o panic.o memcpy.o memset.o \
+	  copy_user_memcpy.o copy_page.o clear_page.o strcpy.o strlen.o
diff --git a/arch/sh/lib64/memcpy.S b/arch/sh/lib64/memcpy.S
new file mode 100644
index 0000000..dd300c3
--- /dev/null
+++ b/arch/sh/lib64/memcpy.S
@@ -0,0 +1,201 @@
+/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
+/* Modified by SuperH, Inc. September 2003 */
+!
+! Fast SH memcpy
+!
+! by Toshiyasu Morita (tm@netcom.com)
+! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut)
+! SH5 code Copyright 2002 SuperH Ltd.
+!
+! Entry: ARG0: destination pointer
+!        ARG1: source pointer
+!        ARG2: byte count
+!
+! Exit:  RESULT: destination pointer
+!        any other registers in the range r0-r7: trashed
+!
+! Notes: Usually one wants to do small reads and write a longword, but
+!        unfortunately it is difficult in some cases to concatanate bytes
+!        into a longword on the SH, so this does a longword read and small
+!        writes.
+!
+! This implementation makes two assumptions about how it is called:
+!
+! 1.: If the byte count is nonzero, the address of the last byte to be
+!     copied is unsigned greater than the address of the first byte to
+!     be copied.  This could be easily swapped for a signed comparison,
+!     but the algorithm used needs some comparison.
+!
+! 2.: When there are two or three bytes in the last word of an 11-or-more
+!     bytes memory chunk to b copied, the rest of the word can be read
+!     without side effects.
+!     This could be easily changed by increasing the minumum size of
+!     a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
+!     however, this would cost a few extra cyles on average.
+!     For SHmedia, the assumption is that any quadword can be read in its
+!     enirety if at least one byte is included in the copy.
+!
+
+	.section .text..SHmedia32,"ax"
+	.globl	memcpy
+	.type	memcpy, @function
+	.align	5
+
+memcpy:
+
+#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1
+#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1
+#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1
+#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1
+
+	ld.b r3,0,r63
+	pta/l Large,tr0
+	movi 25,r0
+	bgeu/u r4,r0,tr0
+	nsb r4,r0
+	shlli r0,5,r0
+	movi (L1-L0+63*32 + 1) & 0xffff,r1
+	sub r1, r0, r0
+L0:	ptrel r0,tr0
+	add r2,r4,r5
+	ptabs r18,tr1
+	add r3,r4,r6
+	blink tr0,r63
+	
+/* Rearranged to make cut2 safe */
+	.balign 8
+L4_7:	/* 4..7 byte memcpy cntd. */
+	stlo.l r2, 0, r0
+	or r6, r7, r6
+	sthi.l r5, -1, r6
+	stlo.l r5, -4, r6
+	blink tr1,r63
+
+	.balign 8
+L1:	/* 0 byte memcpy */
+	nop
+	blink tr1,r63
+	nop
+	nop
+	nop
+	nop
+
+L2_3:	/* 2 or 3 byte memcpy cntd. */
+	st.b r5,-1,r6
+	blink tr1,r63
+
+	/* 1 byte memcpy */
+	ld.b r3,0,r0
+	st.b r2,0,r0
+	blink tr1,r63
+
+L8_15:	/* 8..15 byte memcpy cntd. */
+	stlo.q r2, 0, r0
+	or r6, r7, r6
+	sthi.q r5, -1, r6
+	stlo.q r5, -8, r6
+	blink tr1,r63
+	
+	/* 2 or 3 byte memcpy */
+	ld.b r3,0,r0
+	ld.b r2,0,r63
+	ld.b r3,1,r1
+	st.b r2,0,r0
+	pta/l L2_3,tr0
+	ld.b r6,-1,r6
+	st.b r2,1,r1
+	blink tr0, r63
+
+	/* 4 .. 7 byte memcpy */
+	LDUAL (r3, 0, r0, r1)
+	pta L4_7, tr0
+	ldlo.l r6, -4, r7
+	or r0, r1, r0
+	sthi.l r2, 3, r0
+	ldhi.l r6, -1, r6
+	blink tr0, r63
+
+	/* 8 .. 15 byte memcpy */
+	LDUAQ (r3, 0, r0, r1)
+	pta L8_15, tr0
+	ldlo.q r6, -8, r7
+	or r0, r1, r0
+	sthi.q r2, 7, r0
+	ldhi.q r6, -1, r6
+	blink tr0, r63
+
+	/* 16 .. 24 byte memcpy */
+	LDUAQ (r3, 0, r0, r1)
+	LDUAQ (r3, 8, r8, r9)
+	or r0, r1, r0
+	sthi.q r2, 7, r0
+	or r8, r9, r8
+	sthi.q r2, 15, r8
+	ldlo.q r6, -8, r7
+	ldhi.q r6, -1, r6
+	stlo.q r2, 8, r8
+	stlo.q r2, 0, r0
+	or r6, r7, r6
+	sthi.q r5, -1, r6
+	stlo.q r5, -8, r6
+	blink tr1,r63
+
+Large:
+	ld.b r2, 0, r63
+	pta/l  Loop_ua, tr1
+	ori r3, -8, r7
+	sub r2, r7, r22
+	sub r3, r2, r6
+	add r2, r4, r5
+	ldlo.q r3, 0, r0
+	addi r5, -16, r5
+	movi 64+8, r27 // could subtract r7 from that.
+	stlo.q r2, 0, r0
+	sthi.q r2, 7, r0
+	ldx.q r22, r6, r0
+	bgtu/l r27, r4, tr1
+
+	addi r5, -48, r27
+	pta/l Loop_line, tr0
+	addi r6, 64, r36
+	addi r6, -24, r19
+	addi r6, -16, r20
+	addi r6, -8, r21
+
+Loop_line:
+	ldx.q r22, r36, r63
+	alloco r22, 32
+	addi r22, 32, r22
+	ldx.q r22, r19, r23
+	sthi.q r22, -25, r0
+	ldx.q r22, r20, r24
+	ldx.q r22, r21, r25
+	stlo.q r22, -32, r0
+	ldx.q r22, r6,  r0
+	sthi.q r22, -17, r23
+	sthi.q r22,  -9, r24
+	sthi.q r22,  -1, r25
+	stlo.q r22, -24, r23
+	stlo.q r22, -16, r24
+	stlo.q r22,  -8, r25
+	bgeu r27, r22, tr0
+
+Loop_ua:
+	addi r22, 8, r22
+	sthi.q r22, -1, r0
+	stlo.q r22, -8, r0
+	ldx.q r22, r6, r0
+	bgtu/l r5, r22, tr1
+
+	add r3, r4, r7
+	ldlo.q r7, -8, r1
+	sthi.q r22, 7, r0
+	ldhi.q r7, -1, r7
+	ptabs r18,tr1
+	stlo.q r22, 0, r0
+	or r1, r7, r1
+	sthi.q r5, 15, r1
+	stlo.q r5, 8, r1
+	blink tr1, r63
+
+	.size memcpy,.-memcpy
diff --git a/arch/sh/lib64/memcpy.c b/arch/sh/lib64/memcpy.c
deleted file mode 100644
index fba436a..0000000
--- a/arch/sh/lib64/memcpy.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2002 Mark Debbage (Mark.Debbage@superh.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- */
-
-#include <linux/types.h>
-#include <asm/string.h>
-
-// This is a simplistic optimization of memcpy to increase the
-// granularity of access beyond one byte using aligned
-// loads and stores. This is not an optimal implementation
-// for SH-5 (especially with regard to prefetching and the cache),
-// and a better version should be provided later ...
-
-void *memcpy(void *dest, const void *src, size_t count)
-{
-	char *d = (char *) dest, *s = (char *) src;
-
-	if (count >= 32) {
-		int i = 8 - (((unsigned long) d) & 0x7);
-
-		if (i != 8)
-			while (i-- && count--) {
-				*d++ = *s++;
-			}
-
-		if (((((unsigned long) d) & 0x7) == 0) &&
-		    ((((unsigned long) s) & 0x7) == 0)) {
-			while (count >= 32) {
-				unsigned long long t1, t2, t3, t4;
-				t1 = *(unsigned long long *) (s);
-				t2 = *(unsigned long long *) (s + 8);
-				t3 = *(unsigned long long *) (s + 16);
-				t4 = *(unsigned long long *) (s + 24);
-				*(unsigned long long *) (d) = t1;
-				*(unsigned long long *) (d + 8) = t2;
-				*(unsigned long long *) (d + 16) = t3;
-				*(unsigned long long *) (d + 24) = t4;
-				d += 32;
-				s += 32;
-				count -= 32;
-			}
-			while (count >= 8) {
-				*(unsigned long long *) d =
-				    *(unsigned long long *) s;
-				d += 8;
-				s += 8;
-				count -= 8;
-			}
-		}
-
-		if (((((unsigned long) d) & 0x3) == 0) &&
-		    ((((unsigned long) s) & 0x3) == 0)) {
-			while (count >= 4) {
-				*(unsigned long *) d = *(unsigned long *) s;
-				d += 4;
-				s += 4;
-				count -= 4;
-			}
-		}
-
-		if (((((unsigned long) d) & 0x1) == 0) &&
-		    ((((unsigned long) s) & 0x1) == 0)) {
-			while (count >= 2) {
-				*(unsigned short *) d = *(unsigned short *) s;
-				d += 2;
-				s += 2;
-				count -= 2;
-			}
-		}
-	}
-
-	while (count--) {
-		*d++ = *s++;
-	}
-
-	return d;
-}
diff --git a/arch/sh/lib64/memset.S b/arch/sh/lib64/memset.S
new file mode 100644
index 0000000..2d37b04
--- /dev/null
+++ b/arch/sh/lib64/memset.S
@@ -0,0 +1,91 @@
+/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
+/* Modified by SuperH, Inc. September 2003 */
+!
+! Fast SH memset
+!
+! by Toshiyasu Morita (tm@netcom.com)
+!
+! SH5 code by J"orn Rennecke (joern.rennecke@superh.com)
+! Copyright 2002 SuperH Ltd.
+!
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define SHHI shlld
+#define SHLO shlrd
+#else
+#define SHHI shlrd
+#define SHLO shlld
+#endif
+
+	.section .text..SHmedia32,"ax"
+	.globl	memset
+	.type	memset, @function
+
+	.align 5
+
+memset:
+	pta/l multiquad, tr0
+	andi r2, 7, r22
+	ptabs r18, tr2
+	mshflo.b r3,r3,r3
+	add r4, r22, r23
+	mperm.w r3, r63, r3	// Fill pattern now in every byte of r3
+
+	movi 8, r9
+	bgtu/u r23, r9, tr0 // multiquad
+
+	beqi/u r4, 0, tr2       // Return with size 0 - ensures no mem accesses
+	ldlo.q r2, 0, r7
+	shlli r4, 2, r4
+	movi -1, r8
+	SHHI r8, r4, r8
+	SHHI r8, r4, r8
+	mcmv r7, r8, r3
+	stlo.q r2, 0, r3
+	blink tr2, r63
+
+multiquad:
+	pta/l lastquad, tr0
+	stlo.q r2, 0, r3
+	shlri r23, 3, r24
+	add r2, r4, r5
+	beqi/u r24, 1, tr0 // lastquad
+	pta/l loop, tr1
+	sub r2, r22, r25
+	andi r5, -8, r20   // calculate end address and
+	addi r20, -7*8, r8 // loop end address; This might overflow, so we need
+	                   // to use a different test before we start the loop
+	bge/u r24, r9, tr1 // loop
+	st.q r25, 8, r3
+	st.q r20, -8, r3
+	shlri r24, 1, r24
+	beqi/u r24, 1, tr0 // lastquad
+	st.q r25, 16, r3
+	st.q r20, -16, r3
+	beqi/u r24, 2, tr0 // lastquad
+	st.q r25, 24, r3
+	st.q r20, -24, r3
+lastquad:
+	sthi.q r5, -1, r3
+	blink tr2,r63
+
+loop:
+!!!	alloco r25, 32	// QQQ comment out for short-term fix to SHUK #3895.
+			// QQQ commenting out is locically correct, but sub-optimal
+			// QQQ Sean McGoogan - 4th April 2003.
+	st.q r25, 8, r3
+	st.q r25, 16, r3
+	st.q r25, 24, r3
+	st.q r25, 32, r3
+	addi r25, 32, r25
+	bgeu/l r8, r25, tr1 // loop
+
+	st.q r20, -40, r3
+	st.q r20, -32, r3
+	st.q r20, -24, r3
+	st.q r20, -16, r3
+	st.q r20, -8, r3
+	sthi.q r5, -1, r3
+	blink tr2,r63
+
+	.size	memset,.-memset
diff --git a/arch/sh/lib64/strcpy.S b/arch/sh/lib64/strcpy.S
new file mode 100644
index 0000000..ea7c9c5
--- /dev/null
+++ b/arch/sh/lib64/strcpy.S
@@ -0,0 +1,97 @@
+/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */
+/* Modified by SuperH, Inc. September 2003 */
+! Entry: arg0: destination
+!        arg1: source
+! Exit:  result: destination
+!
+! SH5 code Copyright 2002 SuperH Ltd.
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define SHHI shlld
+#define SHLO shlrd
+#else
+#define SHHI shlrd
+#define SHLO shlld
+#endif
+
+	.section .text..SHmedia32,"ax"
+	.globl	strcpy
+	.type	strcpy, @function
+	.align 5
+
+strcpy:
+
+	pta/l shortstring,tr1
+	ldlo.q r3,0,r4
+	ptabs r18,tr4
+	shlli r3,3,r7
+	addi r2, 8, r0
+	mcmpeq.b r4,r63,r6
+	SHHI r6,r7,r6
+	bnei/u r6,0,tr1 // shortstring
+	pta/l no_lddst, tr2
+	ori r3,-8,r23
+	sub r2, r23, r0
+	sub r3, r2, r21
+	addi r21, 8, r20
+	ldx.q r0, r21, r5
+	pta/l loop, tr0
+	ori r2,-8,r22
+	mcmpeq.b r5, r63, r6
+	bgt/u r22, r23, tr2 // no_lddst
+
+	// r22 < r23 :  Need to do a load from the destination.
+	// r22 == r23 : Doesn't actually need to load from destination,
+	//              but still can be handled here.
+	ldlo.q r2, 0, r9
+	movi -1, r8
+	SHLO r8, r7, r8
+	mcmv r4, r8, r9
+	stlo.q r2, 0, r9
+	beqi/l r6, 0, tr0 // loop
+
+	add r5, r63, r4
+	addi r0, 8, r0
+	blink tr1, r63 // shortstring
+no_lddst:
+	// r22 > r23: note that for r22 == r23 the sthi.q would clobber
+	//            bytes before the destination region.
+	stlo.q r2, 0, r4
+	SHHI r4, r7, r4
+	sthi.q r0, -1, r4
+	beqi/l r6, 0, tr0 // loop
+
+	add r5, r63, r4
+	addi r0, 8, r0
+shortstring:
+#if __BYTE_ORDER != __LITTLE_ENDIAN
+	pta/l shortstring2,tr1
+	byterev r4,r4
+#endif
+shortstring2:
+	st.b r0,-8,r4
+	andi r4,0xff,r5
+	shlri r4,8,r4
+	addi r0,1,r0
+	bnei/l r5,0,tr1
+	blink tr4,r63 // return
+	
+	.balign 8
+loop:
+	stlo.q r0, 0, r5
+	ldx.q r0, r20, r4
+	addi r0, 16, r0
+	sthi.q r0, -9, r5
+	mcmpeq.b r4, r63, r6
+	bnei/u r6, 0, tr1 // shortstring
+	ldx.q r0, r21, r5
+	stlo.q r0, -8, r4
+	sthi.q r0, -1, r4
+	mcmpeq.b r5, r63, r6
+	beqi/l r6, 0, tr0 // loop
+
+	add r5, r63, r4
+	addi r0, 8, r0
+	blink tr1, r63 // shortstring
+
+	.size	strcpy,.-strcpy
diff --git a/arch/sh/lib64/strlen.S b/arch/sh/lib64/strlen.S
new file mode 100644
index 0000000..cbc0d91
--- /dev/null
+++ b/arch/sh/lib64/strlen.S
@@ -0,0 +1,33 @@
+/*
+ * Simplistic strlen() implementation for SHmedia.
+ *
+ * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
+ */
+
+	.section .text..SHmedia32,"ax"
+	.globl	strlen
+	.type	strlen,@function
+
+	.balign 16
+strlen:
+	ptabs	r18, tr4
+
+	/*
+	 * Note: We could easily deal with the NULL case here with a simple
+	 * sanity check, though it seems that the behavior we want is to fault
+	 * in the event that r2 == NULL, so we don't bother.
+	 */
+/*	beqi    r2, 0, tr4 */	! Sanity check
+
+	movi	-1, r0
+	pta/l	loop, tr0
+loop:
+	ld.b	r2, 0, r1
+	addi	r2, 1, r2
+	addi	r0, 1, r0
+	bnei/l	r1, 0, tr0
+
+	or	r0, r63, r2
+	blink	tr4, r63
+
+	.size	strlen,.-strlen