sh: Add SH7785 Highlander board support (R7785RP).

This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

6 files changed, 55 insertions, 17 deletions

diff --git a/arch/sh/drivers/Kconfig b/arch/sh/drivers/Kconfig
index c54c758..420c6b2 100644
--- a/arch/sh/drivers/Kconfig
+++ b/arch/sh/drivers/Kconfig
@@ -1,5 +1,15 @@
+source "arch/sh/drivers/dma/Kconfig"
+source "arch/sh/cchips/Kconfig"
+
 menu "Additional SuperH Device Drivers"
 
+config HEARTBEAT
+	bool "Heartbeat LED"
+	help
+	  Use the power-on LED on your machine as a load meter.  The exact
+	  behavior is platform-dependent, but normally the flash frequency is
+	  a hyperbolic function of the 5-minute load average.
+
 config PUSH_SWITCH
 	tristate "Push switch support"
 	help
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index cc8d0d0..8a7e706 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -8,12 +8,13 @@ obj-$(CONFIG_PCI_AUTO)			+= pci-auto.o
 obj-$(CONFIG_CPU_SUBTYPE_ST40STB1)	+= pci-st40.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7751)	+= pci-sh7751.o ops-sh4.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= pci-sh7780.o ops-sh4.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= pci-sh7780.o ops-sh4.o
 
 obj-$(CONFIG_SH_DREAMCAST)		+= ops-dreamcast.o fixups-dreamcast.o \
 					   dma-dreamcast.o
 obj-$(CONFIG_SH_SECUREEDGE5410)		+= ops-snapgear.o
 obj-$(CONFIG_SH_RTS7751R2D)		+= ops-rts7751r2d.o fixups-rts7751r2d.o
 obj-$(CONFIG_SH_SH03)			+= ops-sh03.o fixups-sh03.o
-obj-$(CONFIG_SH_R7780RP)		+= ops-r7780rp.o fixups-r7780rp.o
+obj-$(CONFIG_SH_HIGHLANDER)		+= ops-r7780rp.o fixups-r7780rp.o
 obj-$(CONFIG_SH_TITAN)			+= ops-titan.o
 obj-$(CONFIG_SH_LANDISK)		+= ops-landisk.o
diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c
index eeea157..6f4fb38 100644
--- a/arch/sh/drivers/pci/ops-r7780rp.c
+++ b/arch/sh/drivers/pci/ops-r7780rp.c
@@ -17,18 +17,35 @@
 #include <asm/io.h>
 #include "pci-sh4.h"
 
+static char r7780rp_irq_tab[] __initdata = {
+	0, 1, 2, 3,
+};
+
+static char r7780mp_irq_tab[] __initdata = {
+	65, 66, 67, 68,
+};
+
+static char r7785rp_irq_tab[][4] __initdata = {
+	{ 65, 66, 67, 68 },	/* INT ABCD */
+	{ 66, 67, 68, 65 },	/* INT BCDA */
+	{ 67, 68, 65, 66 },	/* INT CDAB */
+	{ 68, 65, 66, 67 },	/* INT DABC */
+	{ 64, 64, 64, 64 },	/* PCI Host */
+};
+
 int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
-        switch (slot) {
-	case 0: return IRQ_PCISLOT1;		/* PCI Interrupt #1 */
-	case 1: return IRQ_PCISLOT2;		/* PCI Interrupt #2 */
-	case 2: return IRQ_PCISLOT3;		/* PCI Interrupt #3 */
-	case 3: return IRQ_PCISLOT4;		/* PCI Interrupt E4 */
-	default:
-		printk(KERN_ERR "PCI: Bad IRQ mapping "
-		       "request for slot %d, func %d\n", slot, pin-1);
-		return -1;
-	}
+	if (mach_is_r7780rp())
+		return r7780rp_irq_tab[slot];
+	if (mach_is_r7780mp())
+		return r7780mp_irq_tab[slot];
+	if (mach_is_r7785rp())
+		return r7785rp_irq_tab[slot][pin];
+
+	printk(KERN_ERR "PCI: Bad IRQ mapping "
+	       "request for slot %d, func %d\n", slot, pin-1);
+
+	return -1;
 }
 
 static struct resource sh7780_io_resource = {
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
index 5a61d60..1901c33 100644
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -1,7 +1,7 @@
 #ifndef __PCI_SH4_H
 #define __PCI_SH4_H
 
-#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
 #include "pci-sh7780.h"
 #else
 #include "pci-sh7751.h"
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index 602b644..16b30a9 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -48,7 +48,7 @@
 static int __init sh7780_pci_init(void)
 {
 	unsigned int id;
-	int ret;
+	int ret, match = 0;
 
 	pr_debug("PCI: Starting intialization.\n");
 
@@ -56,8 +56,17 @@ static int __init sh7780_pci_init(void)
 
 	/* check for SH7780/SH7780R hardware */
 	id = pci_read_reg(SH7780_PCIVID);
-	if ((id != ((SH7780_DEVICE_ID << 16) | SH7780_VENDOR_ID)) &&
-	    (id != ((SH7781_DEVICE_ID << 16) | SH7780_VENDOR_ID))) {
+	if ((id & 0xffff) == SH7780_VENDOR_ID) {
+		switch ((id >> 16) & 0xffff) {
+		case SH7780_DEVICE_ID:
+		case SH7781_DEVICE_ID:
+		case SH7785_DEVICE_ID:
+			match = 1;
+			break;
+		}
+	}
+
+	if (unlikely(!match)) {
 		printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id);
 		return -ENODEV;
 	}
@@ -138,7 +147,7 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
 	 * DMA interrupts...
 	 */
 
-#ifdef CONFIG_SH_R7780RP
+#ifdef CONFIG_SH_HIGHLANDER
 	pci_fixup_pcic();
 #endif
 
diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h
index f02d218..bd44255 100644
--- a/arch/sh/drivers/pci/pci-sh7780.h
+++ b/arch/sh/drivers/pci/pci-sh7780.h
@@ -14,8 +14,9 @@
 
 /* Platform Specific Values */
 #define SH7780_VENDOR_ID	0x1912
-#define SH7780_DEVICE_ID	0x0002
 #define SH7781_DEVICE_ID	0x0001
+#define SH7780_DEVICE_ID	0x0002
+#define SH7785_DEVICE_ID	0x0007
 
 /* SH7780 Control Registers */
 #define	SH7780_PCI_VCR0		0xFE000000