summaryrefslogtreecommitdiffstats
path: root/arch/sh/drivers
diff options
context:
space:
mode:
authorMagnus Damm <magnus.damm@gmail.com>2008-02-14 13:52:43 +0900
committerPaul Mundt <lethal@linux-sh.org>2008-02-14 14:25:32 +0900
commite036eaa681a17f71b64f6d9040fe605555623919 (patch)
tree6fe462fe6106e830f39abd25f0e1a4f8aff3cb5c /arch/sh/drivers
parentf99cb7a43c5cca1813a97312487acf7a0f88ee2a (diff)
downloadop-kernel-dev-e036eaa681a17f71b64f6d9040fe605555623919.zip
op-kernel-dev-e036eaa681a17f71b64f6d9040fe605555623919.tar.gz
sh: use ctrl_in/out for on chip pci access
This patch makes sure ctrl_inN/outN are used instead of inN/outN for on chip pci registers. Without this patch addresses may be adjusted using the value in generic_io_base. This patch makes it possible to set generic_io_base and have pci without reading and writing all over the place. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/sh/drivers')
-rw-r--r--arch/sh/drivers/pci/fixups-lboxre2.c4
-rw-r--r--arch/sh/drivers/pci/fixups-rts7751r2d.c4
-rw-r--r--arch/sh/drivers/pci/ops-dreamcast.c44
-rw-r--r--arch/sh/drivers/pci/pci-sh4.h4
-rw-r--r--arch/sh/drivers/pci/pci-sh7751.c16
-rw-r--r--arch/sh/drivers/pci/pci-sh7780.c2
6 files changed, 37 insertions, 37 deletions
diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c
index 40b19bd..1c1d412 100644
--- a/arch/sh/drivers/pci/fixups-lboxre2.c
+++ b/arch/sh/drivers/pci/fixups-lboxre2.c
@@ -18,7 +18,7 @@ int pci_fixup_pcic(void)
{
unsigned long bcr1, mcr;
- bcr1 = inl(SH7751_BCR1);
+ bcr1 = ctrl_inl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
pci_write_reg(bcr1, SH4_PCIBCR1);
@@ -28,7 +28,7 @@ int pci_fixup_pcic(void)
pci_write_reg(0xfb900047, SH7751_PCICONF1);
pci_write_reg(0xab000001, SH7751_PCICONF4);
- mcr = inl(SH7751_MCR);
+ mcr = ctrl_inl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
pci_write_reg(mcr, SH4_PCIMCR);
diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c
index e72ceb5..904bce8 100644
--- a/arch/sh/drivers/pci/fixups-rts7751r2d.c
+++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c
@@ -19,7 +19,7 @@ int pci_fixup_pcic(void)
{
unsigned long bcr1, mcr;
- bcr1 = inl(SH7751_BCR1);
+ bcr1 = ctrl_inl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
pci_write_reg(bcr1, SH4_PCIBCR1);
@@ -30,7 +30,7 @@ int pci_fixup_pcic(void)
pci_write_reg(0xfb900047, SH7751_PCICONF1);
pci_write_reg(0xab000001, SH7751_PCICONF4);
- mcr = inl(SH7751_MCR);
+ mcr = ctrl_inl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
pci_write_reg(mcr, SH4_PCIMCR);
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index e1284fc..0dac87b1 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -83,9 +83,9 @@ static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
- case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
- case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
- case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
+ case 1: *val = ctrl_inb(GAPSPCI_BBA_CONFIG+where); break;
+ case 2: *val = ctrl_inw(GAPSPCI_BBA_CONFIG+where); break;
+ case 4: *val = ctrl_inl(GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
@@ -97,9 +97,9 @@ static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
- case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
- case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
- case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
+ case 1: ctrl_outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
+ case 2: ctrl_outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
+ case 4: ctrl_outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
@@ -127,36 +127,36 @@ int __init gapspci_init(void)
*/
for (i=0; i<16; i++)
- idbuf[i] = inb(GAPSPCI_REGS+i);
+ idbuf[i] = ctrl_inb(GAPSPCI_REGS+i);
if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
return -ENODEV;
- outl(0x5a14a501, GAPSPCI_REGS+0x18);
+ ctrl_outl(0x5a14a501, GAPSPCI_REGS+0x18);
for (i=0; i<1000000; i++)
;
- if (inl(GAPSPCI_REGS+0x18) != 1)
+ if (ctrl_inl(GAPSPCI_REGS+0x18) != 1)
return -EINVAL;
- outl(0x01000000, GAPSPCI_REGS+0x20);
- outl(0x01000000, GAPSPCI_REGS+0x24);
+ ctrl_outl(0x01000000, GAPSPCI_REGS+0x20);
+ ctrl_outl(0x01000000, GAPSPCI_REGS+0x24);
- outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
- outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
+ ctrl_outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
+ ctrl_outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
- outl(1, GAPSPCI_REGS+0x14);
- outl(1, GAPSPCI_REGS+0x34);
+ ctrl_outl(1, GAPSPCI_REGS+0x14);
+ ctrl_outl(1, GAPSPCI_REGS+0x34);
/* Setting Broadband Adapter */
- outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
- outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
- outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
- outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
- outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
- outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
- outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
+ ctrl_outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
+ ctrl_outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
+ ctrl_outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
+ ctrl_outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
+ ctrl_outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
+ ctrl_outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
+ ctrl_outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
return 0;
}
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
index 4925c79..07e2950 100644
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -172,11 +172,11 @@ struct sh4_pci_address_map {
static inline void pci_write_reg(unsigned long val, unsigned long reg)
{
- outl(val, PCI_REG(reg));
+ ctrl_outl(val, PCI_REG(reg));
}
static inline unsigned long pci_read_reg(unsigned long reg)
{
- return inl(PCI_REG(reg));
+ return ctrl_inl(PCI_REG(reg));
}
#endif /* __PCI_SH4_H */
diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c
index 1aca7fe..3065eb184 100644
--- a/arch/sh/drivers/pci/pci-sh7751.c
+++ b/arch/sh/drivers/pci/pci-sh7751.c
@@ -58,7 +58,7 @@ static int __init __area_sdram_check(unsigned int area)
{
u32 word;
- word = inl(SH7751_BCR1);
+ word = ctrl_inl(SH7751_BCR1);
/* check BCR for SDRAM in area */
if (((word >> area) & 1) == 0) {
printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n",
@@ -67,7 +67,7 @@ static int __init __area_sdram_check(unsigned int area)
}
pci_write_reg(word, SH4_PCIBCR1);
- word = (u16)inw(SH7751_BCR2);
+ word = (u16)ctrl_inw(SH7751_BCR2);
/* check BCR2 for 32bit SDRAM interface*/
if (((word >> (area << 1)) & 0x3) != 0x3) {
printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n",
@@ -85,9 +85,9 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
u32 word;
/* Set the BCR's to enable PCI access */
- reg = inl(SH7751_BCR1);
+ reg = ctrl_inl(SH7751_BCR1);
reg |= 0x80000;
- outl(reg, SH7751_BCR1);
+ ctrl_outl(reg, SH7751_BCR1);
/* Turn the clocks back on (not done in reset)*/
pci_write_reg(0, SH4_PCICLKR);
@@ -179,13 +179,13 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
return 0;
/* configure the wait control registers */
- word = inl(SH7751_WCR1);
+ word = ctrl_inl(SH7751_WCR1);
pci_write_reg(word, SH4_PCIWCR1);
- word = inl(SH7751_WCR2);
+ word = ctrl_inl(SH7751_WCR2);
pci_write_reg(word, SH4_PCIWCR2);
- word = inl(SH7751_WCR3);
+ word = ctrl_inl(SH7751_WCR3);
pci_write_reg(word, SH4_PCIWCR3);
- word = inl(SH7751_MCR);
+ word = ctrl_inl(SH7751_MCR);
pci_write_reg(word, SH4_PCIMCR);
/* NOTE: I'm ignoring the PCI error IRQs for now..
diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c
index 7d797f4de..b2a2bfa 100644
--- a/arch/sh/drivers/pci/pci-sh7780.c
+++ b/arch/sh/drivers/pci/pci-sh7780.c
@@ -52,7 +52,7 @@ static int __init sh7780_pci_init(void)
pr_debug("PCI: Starting intialization.\n");
- outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
+ ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
/* check for SH7780/SH7780R hardware */
id = pci_read_reg(SH7780_PCIVID);
OpenPOWER on IntegriCloud