Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/scsi/fcoe/fcoe.c
	net/core/drop_monitor.c
	net/core/net-traces.c

22 files changed, 819 insertions, 252 deletions

diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index dcc1af8..1c91b1f 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -46,6 +46,15 @@ config SH_7722_SOLUTION_ENGINE
 	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
 	  evaluation board.
 
+config SH_7724_SOLUTION_ENGINE
+	bool "SolutionEngine7724"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7724
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Select 7724 SolutionEngine if configuring for a Hitachi SH7724
+	  evaluation board.
+
 config SH_7751_SOLUTION_ENGINE
 	bool "SolutionEngine7751"
 	select SOLUTION_ENGINE
@@ -121,7 +130,7 @@ config SH_RTS7751R2D
 	bool "RTS7751R2D"
 	depends on CPU_SUBTYPE_SH7751R
 	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
+	select IO_TRAPPED if MMU
 	help
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
@@ -145,13 +154,13 @@ config SH_HIGHLANDER
 	bool "Highlander"
 	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
+	select IO_TRAPPED if MMU
 
 config SH_SH7785LCR
 	bool "SH7785LCR"
 	depends on CPU_SUBTYPE_SH7785
 	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
+	select IO_TRAPPED if MMU
 
 config SH_SH7785LCR_29BIT_PHYSMAPS
 	bool "SH7785LCR 29bit physmaps"
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 39e4691..1c4d83e 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -263,6 +263,9 @@ static int camera_probe(void)
 	struct i2c_msg msg;
 	int ret;
 
+	if (!a)
+		return -ENODEV;
+
 	camera_power(1);
 	msg.addr = 0x6e;
 	msg.buf = camera_ncm03j_magic;
@@ -532,6 +535,18 @@ static int __init ap325rxa_devices_setup(void)
 }
 device_initcall(ap325rxa_devices_setup);
 
+/* Return the board specific boot mode pin configuration */
+static int ap325rxa_mode_pins(void)
+{
+	/* MD0=0, MD1=0, MD2=0: Clock Mode 0
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * TSTMD=1, MD8=1: Test Mode Disabled
+	 */
+	return MODE_PIN5 | MODE_PIN8;
+}
+
 static struct sh_machine_vector mv_ap325rxa __initmv = {
 	.mv_name = "AP-325RXA",
+	.mv_mode_pins = ap325rxa_mode_pins,
 };
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 6f94f17..7be56fb 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -2,12 +2,12 @@
  * Renesas Technology Corp. R0P7785LC0011RL Support.
  *
  * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2009  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/sm501.h>
@@ -19,8 +19,12 @@
 #include <linux/i2c-pca-platform.h>
 #include <linux/i2c-algo-pca.h>
 #include <linux/irq.h>
-#include <asm/heartbeat.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
 #include <mach/sh7785lcr.h>
+#include <asm/heartbeat.h>
+#include <asm/clock.h>
+#include <cpu/sh7785.h>
 
 /*
  * NOTE: This board has 2 physical memory maps.
@@ -273,6 +277,20 @@ void __init init_sh7785lcr_IRQ(void)
 	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
 }
 
+static int sh7785lcr_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "extal");
+	if (!clk || IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333333);
+	clk_put(clk);
+
+	return ret;
+}
+
 static void sh7785lcr_power_off(void)
 {
 	unsigned char *p;
@@ -303,12 +321,34 @@ static void __init sh7785lcr_setup(char **cmdline_p)
 	writel(0x000307c2, sm501_reg);
 }
 
+/* Return the board specific boot mode pin configuration */
+static int sh7785lcr_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of S1 and S2.
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value |= MODE_PIN4; /* Clock Mode 16 */
+	value |= MODE_PIN5; /* 32-bit Area0 bus width */
+	value |= MODE_PIN6; /* 32-bit Area0 bus width */
+	value |= MODE_PIN7; /* Area 0 SRAM interface [fixed] */
+	value |= MODE_PIN8; /* Little Endian */
+	value |= MODE_PIN9; /* Master Mode */
+	value |= MODE_PIN14; /* No PLL step-up */
+
+	return value;
+}
+
 /*
  * The Machine Vector
  */
 static struct sh_machine_vector mv_sh7785lcr __initmv = {
 	.mv_name		= "SH7785LCR",
 	.mv_setup		= sh7785lcr_setup,
+	.mv_clk_init		= sh7785lcr_clk_init,
 	.mv_init_irq		= init_sh7785lcr_IRQ,
+	.mv_mode_pins		= sh7785lcr_mode_pins,
 };
 
diff --git a/arch/sh/boards/mach-cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile
index cafe1ac3..00fa3ea 100644
--- a/arch/sh/boards/mach-cayman/Makefile
+++ b/arch/sh/boards/mach-cayman/Makefile
@@ -1,4 +1,4 @@
 #
 # Makefile for the Hitachi Cayman specific parts of the kernel
 #
-obj-y := setup.o irq.o
+obj-y := setup.o irq.o panic.o
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index da62ad5..33f77085 100644
--- a/arch/sh/boards/mach-cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -142,26 +142,11 @@ int cayman_irq_demux(int evt)
 	return irq;
 }
 
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-int cayman_irq_describe(char* p, int irq)
-{
-	if (irq < NR_INTC_IRQS) {
-		return intc_irq_describe(p, irq);
-	} else if (irq < NR_INTC_IRQS + 8) {
-		return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
-	} else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
-		return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
-	}
-
-	return 0;
-}
-#endif
-
 void init_cayman_irq(void)
 {
 	int i;
 
-	epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
+	epld_virt = (unsigned long)ioremap_nocache(EPLD_BASE, 1024);
 	if (!epld_virt) {
 		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
 		return;
diff --git a/arch/sh/boards/mach-cayman/panic.c b/arch/sh/boards/mach-cayman/panic.c
new file mode 100644
index 0000000..d1e6730
--- /dev/null
+++ b/arch/sh/boards/mach-cayman/panic.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2003  Richard Curnow, SuperH UK Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <cpu/registers.h>
+
+/* THIS IS A PHYSICAL ADDRESS */
+#define HDSP2534_ADDR (0x04002100)
+
+static void poor_mans_delay(void)
+{
+	int i;
+
+	for (i = 0; i < 2500000; i++)
+		cpu_relax();
+}
+
+static void show_value(unsigned long x)
+{
+	int i;
+	unsigned nibble;
+	for (i = 0; i < 8; i++) {
+		nibble = ((x >> (i * 4)) & 0xf);
+
+		__raw_writeb(nibble + ((nibble > 9) ? 55 : 48),
+			  HDSP2534_ADDR + 0xe0 + ((7 - i) << 2));
+	}
+}
+
+void
+panic_handler(unsigned long panicPC, unsigned long panicSSR,
+	      unsigned long panicEXPEVT)
+{
+	while (1) {
+		/* This piece of code displays the PC on the LED display */
+		show_value(panicPC);
+		poor_mans_delay();
+		show_value(panicSSR);
+		poor_mans_delay();
+		show_value(panicEXPEVT);
+		poor_mans_delay();
+	}
+}
diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c
index e7f9cc5..7e8216a 100644
--- a/arch/sh/boards/mach-cayman/setup.c
+++ b/arch/sh/boards/mach-cayman/setup.c
@@ -102,7 +102,7 @@ static int __init smsc_superio_setup(void)
 {
 	unsigned char devid, devrev;
 
-	smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
+	smsc_superio_virt = (unsigned long)ioremap_nocache(SMSC_SUPERIO_BASE, 1024);
 	if (!smsc_superio_virt) {
 		panic("Unable to remap SMSC SuperIO\n");
 	}
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
index d1bee48..ebe9922 100644
--- a/arch/sh/boards/mach-dreamcast/setup.c
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -30,7 +30,6 @@
 
 extern struct irq_chip systemasic_int;
 extern void aica_time_init(void);
-extern int gapspci_init(void);
 extern int systemasic_irq_demux(int);
 
 static void __init dreamcast_setup(char **cmdline_p)
@@ -51,11 +50,6 @@ static void __init dreamcast_setup(char **cmdline_p)
 					 handle_level_irq);
 
 	board_time_init = aica_time_init;
-
-#ifdef CONFIG_PCI
-	if (gapspci_init() < 0)
-		printk(KERN_WARNING "GAPSPCI was not detected.\n");
-#endif
 }
 
 static struct sh_machine_vector mv_dreamcast __initmv = {
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 1ee1de0..6ed401c 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -584,3 +584,22 @@ static int __init migor_devices_setup(void)
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
 __initcall(migor_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int migor_mode_pins(void)
+{
+	/* MD0=1, MD1=1, MD2=0: Clock Mode 3
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * TSTMD=1, MD8=0: Test Mode Disabled
+	 */
+	return MODE_PIN0 | MODE_PIN1 | MODE_PIN5;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_migor __initmv = {
+	.mv_name		= "Migo-R",
+	.mv_mode_pins		= migor_mode_pins,
+};
diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index c585be0..a625ecb 100644
--- a/arch/sh/boards/mach-r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
@@ -10,6 +10,9 @@
  */
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/ata_platform.h>
 #include <linux/sm501.h>
 #include <linux/sm501-regs.h>
@@ -181,6 +184,50 @@ static struct platform_device sm501_device = {
 	.resource	= sm501_resources,
 };
 
+static struct mtd_partition r2d_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Environment",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(r2d_partitions),
+	.parts		= r2d_partitions,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x00000000,
+	.end		= 0x02000000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
 static struct platform_device *rts7751r2d_devices[] __initdata = {
 	&sm501_device,
 	&heartbeat_device,
@@ -203,6 +250,9 @@ static int __init rts7751r2d_devices_setup(void)
 	if (register_trapped_io(&cf_trapped_io) == 0)
 		platform_device_register(&cf_ide_device);
 
+	if (mach_is_r2d_plus())
+		platform_device_register(&flash_device);
+
 	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
 
 	return platform_add_devices(rts7751r2d_devices,
diff --git a/arch/sh/boards/mach-se/7724/Makefile b/arch/sh/boards/mach-se/7724/Makefile
new file mode 100644
index 0000000..349cbd6
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the HITACHI UL SolutionEngine 7724 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o
\ No newline at end of file
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
new file mode 100644
index 0000000..f76cf3b
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/irq.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/sh/boards/se/7724/irq.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on  linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7724 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7724.h>
+
+struct fpga_irq {
+	unsigned long  sraddr;
+	unsigned long  mraddr;
+	unsigned short mask;
+	unsigned int   base;
+};
+
+static unsigned int fpga2irq(unsigned int irq)
+{
+	if (irq >= IRQ0_BASE &&
+	    irq <= IRQ0_END)
+		return IRQ0_IRQ;
+	else if (irq >= IRQ1_BASE &&
+		 irq <= IRQ1_END)
+		return IRQ1_IRQ;
+	else
+		return IRQ2_IRQ;
+}
+
+static struct fpga_irq get_fpga_irq(unsigned int irq)
+{
+	struct fpga_irq set;
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		set.sraddr = IRQ0_SR;
+		set.mraddr = IRQ0_MR;
+		set.mask   = IRQ0_MASK;
+		set.base   = IRQ0_BASE;
+		break;
+	case IRQ1_IRQ:
+		set.sraddr = IRQ1_SR;
+		set.mraddr = IRQ1_MR;
+		set.mask   = IRQ1_MASK;
+		set.base   = IRQ1_BASE;
+		break;
+	default:
+		set.sraddr = IRQ2_SR;
+		set.mraddr = IRQ2_MR;
+		set.mask   = IRQ2_MASK;
+		set.base   = IRQ2_BASE;
+		break;
+	}
+
+	return set;
+}
+
+static void disable_se7724_irq(unsigned int irq)
+{
+	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
+	unsigned int bit = irq - set.base;
+	ctrl_outw(ctrl_inw(set.mraddr) | 0x0001 << bit, set.mraddr);
+}
+
+static void enable_se7724_irq(unsigned int irq)
+{
+	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
+	unsigned int bit = irq - set.base;
+	ctrl_outw(ctrl_inw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
+}
+
+static struct irq_chip se7724_irq_chip __read_mostly = {
+	.name           = "SE7724-FPGA",
+	.mask           = disable_se7724_irq,
+	.unmask         = enable_se7724_irq,
+	.mask_ack       = disable_se7724_irq,
+};
+
+static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct fpga_irq set = get_fpga_irq(irq);
+	unsigned short intv = ctrl_inw(set.sraddr);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = set.base;
+
+	intv &= set.mask;
+
+	while (intv) {
+		if (intv & 0x0001) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
+	}
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7724_IRQ(void)
+{
+	int i;
+
+	ctrl_outw(0xffff, IRQ0_MR);  /* mask all */
+	ctrl_outw(0xffff, IRQ1_MR);  /* mask all */
+	ctrl_outw(0xffff, IRQ2_MR);  /* mask all */
+	ctrl_outw(0x0000, IRQ0_SR);  /* clear irq */
+	ctrl_outw(0x0000, IRQ1_SR);  /* clear irq */
+	ctrl_outw(0x0000, IRQ2_SR);  /* clear irq */
+	ctrl_outw(0x002a, IRQ_MODE); /* set irq type */
+
+	for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
+		set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i,
+					      &se7724_irq_chip,
+					      handle_level_irq, "level");
+
+	set_irq_chained_handler(IRQ0_IRQ, se7724_irq_demux);
+	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	set_irq_chained_handler(IRQ1_IRQ, se7724_irq_demux);
+	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	set_irq_chained_handler(IRQ2_IRQ, se7724_irq_demux);
+	set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
new file mode 100644
index 0000000..9cd04bd
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -0,0 +1,448 @@
+/*
+ * linux/arch/sh/boards/se/7724/setup.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/smc91x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <asm/sh_keysc.h>
+#include <cpu/sh7724.h>
+#include <mach-se/mach/se7724.h>
+
+/*
+ * SWx    1234 5678
+ * ------------------------------------
+ * SW31 : 1001 1100    : default
+ * SW32 : 0111 1111    : use on board flash
+ *
+ * SW41 : abxx xxxx  -> a = 0 : Analog  monitor
+ *                          1 : Digital monitor
+ *                      b = 0 : VGA
+ *                          1 : SVGA
+ */
+
+/* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = PA_LED,
+		.end    = PA_LED,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* LAN91C111 */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x1a300300,
+		.end    = 0x1a30030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ0_SMC,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name	= "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (2 * 1024 * 1024),
+	}, {
+		.name = "free-area",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.dev		= {
+		.platform_data = &nor_flash_data,
+	},
+};
+
+/* LCDC */
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.clock_divider = 1,
+		.lcd_cfg = {
+			.name = "LB070WV1",
+			.sync = 0, /* hsync and vsync are active low */
+		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+		.board_cfg = {
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 106,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu0_resources[] = {
+	[0] = {
+		.name	= "CEU0",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu0_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu0_resources),
+	.resource	= ceu0_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu0_info,
+	},
+};
+
+/* CEU1 */
+static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu1_resources[] = {
+	[0] = {
+		.name	= "CEU1",
+		.start	= 0xfe914000,
+		.end	= 0xfe91409f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 63,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu1_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 1, /* "ceu1" clock */
+	.num_resources	= ARRAY_SIZE(ceu1_resources),
+	.resource	= ceu1_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu1_info,
+	},
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode = SH_KEYSC_MODE_1,
+	.scan_timing = 10,
+	.delay = 50,
+	.keycodes = {
+		KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
+		KEY_6, KEY_7, KEY_8, KEY_9, KEY_A,
+		KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
+		KEY_G, KEY_H, KEY_I, KEY_K, KEY_L,
+		KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q,
+		KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.start  = 0x1a204000,
+		.end    = 0x1a20400f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ0_KEY,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+static struct platform_device *ms7724se_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&lcdc_device,
+	&nor_flash_device,
+	&ceu0_device,
+	&ceu1_device,
+	&keysc_device,
+};
+
+#define SW4140    0xBA201000
+#define FPGA_OUT  0xBA200400
+#define PORT_HIZA 0xA4050158
+
+#define SW41_A    0x0100
+#define SW41_B    0x0200
+#define SW41_C    0x0400
+#define SW41_D    0x0800
+#define SW41_E    0x1000
+#define SW41_F    0x2000
+#define SW41_G    0x4000
+#define SW41_H    0x8000
+static int __init devices_setup(void)
+{
+	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
+
+	/* Reset Release */
+	ctrl_outw(ctrl_inw(FPGA_OUT) &
+		  ~((1 << 1)  | /* LAN */
+		    (1 << 6)  | /* VIDEO DAC */
+		    (1 << 12)), /* USB0 */
+		  FPGA_OUT);
+
+	/* enable IRQ 0,1,2 */
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+	gpio_request(GPIO_FN_INTC_IRQ2, NULL);
+
+	/* enable SCIFA3 */
+	gpio_request(GPIO_FN_SCIF3_I_SCK, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_TXD, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_CTS, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_RTS, NULL);
+
+	/* enable LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDHSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+	gpio_request(GPIO_FN_LCDVSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDON,   NULL);
+	gpio_request(GPIO_FN_LCDVEPWC, NULL);
+	gpio_request(GPIO_FN_LCDVCPWC, NULL);
+	gpio_request(GPIO_FN_LCDRD,    NULL);
+	gpio_request(GPIO_FN_LCDLCLK,  NULL);
+	ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+	/* enable CEU0 */
+	gpio_request(GPIO_FN_VIO0_D15, NULL);
+	gpio_request(GPIO_FN_VIO0_D14, NULL);
+	gpio_request(GPIO_FN_VIO0_D13, NULL);
+	gpio_request(GPIO_FN_VIO0_D12, NULL);
+	gpio_request(GPIO_FN_VIO0_D11, NULL);
+	gpio_request(GPIO_FN_VIO0_D10, NULL);
+	gpio_request(GPIO_FN_VIO0_D9,  NULL);
+	gpio_request(GPIO_FN_VIO0_D8,  NULL);
+	gpio_request(GPIO_FN_VIO0_D7,  NULL);
+	gpio_request(GPIO_FN_VIO0_D6,  NULL);
+	gpio_request(GPIO_FN_VIO0_D5,  NULL);
+	gpio_request(GPIO_FN_VIO0_D4,  NULL);
+	gpio_request(GPIO_FN_VIO0_D3,  NULL);
+	gpio_request(GPIO_FN_VIO0_D2,  NULL);
+	gpio_request(GPIO_FN_VIO0_D1,  NULL);
+	gpio_request(GPIO_FN_VIO0_D0,  NULL);
+	gpio_request(GPIO_FN_VIO0_VD,  NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD,  NULL);
+	platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
+
+	/* enable CEU1 */
+	gpio_request(GPIO_FN_VIO1_D7,  NULL);
+	gpio_request(GPIO_FN_VIO1_D6,  NULL);
+	gpio_request(GPIO_FN_VIO1_D5,  NULL);
+	gpio_request(GPIO_FN_VIO1_D4,  NULL);
+	gpio_request(GPIO_FN_VIO1_D3,  NULL);
+	gpio_request(GPIO_FN_VIO1_D2,  NULL);
+	gpio_request(GPIO_FN_VIO1_D1,  NULL);
+	gpio_request(GPIO_FN_VIO1_D0,  NULL);
+	gpio_request(GPIO_FN_VIO1_FLD, NULL);
+	gpio_request(GPIO_FN_VIO1_HD,  NULL);
+	gpio_request(GPIO_FN_VIO1_VD,  NULL);
+	gpio_request(GPIO_FN_VIO1_CLK, NULL);
+	platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
+
+	/* KEYSC */
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN4,      NULL);
+	gpio_request(GPIO_FN_KEYIN3,      NULL);
+	gpio_request(GPIO_FN_KEYIN2,      NULL);
+	gpio_request(GPIO_FN_KEYIN1,      NULL);
+	gpio_request(GPIO_FN_KEYIN0,      NULL);
+	gpio_request(GPIO_FN_KEYOUT3,     NULL);
+	gpio_request(GPIO_FN_KEYOUT2,     NULL);
+	gpio_request(GPIO_FN_KEYOUT1,     NULL);
+	gpio_request(GPIO_FN_KEYOUT0,     NULL);
+
+	if (sw & SW41_B) {
+		/* SVGA */
+		lcdc_info.ch[0].lcd_cfg.xres         = 800;
+		lcdc_info.ch[0].lcd_cfg.yres         = 600;
+		lcdc_info.ch[0].lcd_cfg.left_margin  = 142;
+		lcdc_info.ch[0].lcd_cfg.right_margin = 52;
+		lcdc_info.ch[0].lcd_cfg.hsync_len    = 96;
+		lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
+		lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
+		lcdc_info.ch[0].lcd_cfg.vsync_len    = 2;
+	} else {
+		/* VGA */
+		lcdc_info.ch[0].lcd_cfg.xres         = 640;
+		lcdc_info.ch[0].lcd_cfg.yres         = 480;
+		lcdc_info.ch[0].lcd_cfg.left_margin  = 105;
+		lcdc_info.ch[0].lcd_cfg.right_margin = 50;
+		lcdc_info.ch[0].lcd_cfg.hsync_len    = 96;
+		lcdc_info.ch[0].lcd_cfg.upper_margin = 33;
+		lcdc_info.ch[0].lcd_cfg.lower_margin = 10;
+		lcdc_info.ch[0].lcd_cfg.vsync_len    = 2;
+	}
+
+	if (sw & SW41_A) {
+		/* Digital monitor */
+		lcdc_info.ch[0].interface_type = RGB18;
+		lcdc_info.ch[0].flags          = 0;
+	} else {
+		/* Analog monitor */
+		lcdc_info.ch[0].interface_type = RGB24;
+		lcdc_info.ch[0].flags          = LCDC_FLAGS_DWPOL;
+	}
+
+	return platform_add_devices(ms7724se_devices,
+				ARRAY_SIZE(ms7724se_devices));
+}
+device_initcall(devices_setup);
+
+static struct sh_machine_vector mv_ms7724se __initmv = {
+	.mv_name	= "ms7724se",
+	.mv_init_irq	= init_se7724_IRQ,
+	.mv_nr_irqs	= SE7724_FPGA_IRQ_BASE + SE7724_FPGA_IRQ_NR,
+};
diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index dbc29f3..e6f4341 100644
--- a/arch/sh/boards/mach-se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
@@ -3,5 +3,3 @@
 #
 
 obj-y	 := setup.o io.o irq.o
-
-obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
index 6287ae5..6e75bd4 100644
--- a/arch/sh/boards/mach-se/7751/io.c
+++ b/arch/sh/boards/mach-se/7751/io.c
@@ -34,8 +34,6 @@ unsigned char sh7751se_inb(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned char *)pci_ioaddr(port);
 	else
 		return (*port2adr(port)) & 0xff;
 }
@@ -46,8 +44,6 @@ unsigned char sh7751se_inb_p(unsigned long port)
 
         if (PXSEG(port))
                 v = *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-                v = *(volatile unsigned char *)pci_ioaddr(port);
 	else
 		v = (*port2adr(port)) & 0xff;
 	ctrl_delay();
@@ -58,8 +54,6 @@ unsigned short sh7751se_inw(unsigned long port)
 {
         if (PXSEG(port))
                 return *(volatile unsigned short *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned short *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
@@ -71,8 +65,6 @@ unsigned int sh7751se_inl(unsigned long port)
 {
         if (PXSEG(port))
                 return *(volatile unsigned long *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned int *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
@@ -85,8 +77,6 @@ void sh7751se_outb(unsigned char value, unsigned long port)
 
         if (PXSEG(port))
                 *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
 }
@@ -95,8 +85,6 @@ void sh7751se_outb_p(unsigned char value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
 	ctrl_delay();
@@ -106,8 +94,6 @@ void sh7751se_outw(unsigned short value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned short *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned short *)pci_ioaddr(port)) = value;
 	else if (port >= 0x2000)
 		*port2adr(port) = value;
 	else
@@ -118,8 +104,6 @@ void sh7751se_outl(unsigned int value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned long *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned long*)pci_ioaddr(port)) = value;
 	else
 		maybebadio(port);
 }
diff --git a/arch/sh/boards/mach-se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c
deleted file mode 100644
index 203b292..0000000
--- a/arch/sh/boards/mach-se/7751/pci.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/pci.c
- *
- * Author:  Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01)
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
-#define PCIMCR_MRSET_OFF	0xBFFFFFFF
-#define PCIMCR_RFSH_OFF		0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description:  This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
-   unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
-   unsigned short bcr2;
-
-   /*
-    * Initialize the slave bus controller on the pcic.  The values used
-    * here should not be hardcoded, but they should be taken from the bsc
-    * on the processor, to make this function as generic as possible.
-    * (i.e. Another sbc may usr different SDRAM timing settings -- in order
-    * for the pcic to work, its settings need to be exactly the same.)
-    */
-   bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
-   bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
-   wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
-   wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
-   wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
-   mcr = (*(volatile unsigned long*)(SH7751_MCR));
-
-   bcr1 = bcr1 | 0x00080000;  /* Enable Bit 19, BREQEN */
-   (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;   
-
-   bcr1 = bcr1 | 0x40080000;  /* Enable Bit 19 BREQEN, set PCIC to slave */
-   PCIC_WRITE(SH7751_PCIBCR1, bcr1);	 /* PCIC BCR1 */
-   PCIC_WRITE(SH7751_PCIBCR2, bcr2);     /* PCIC BCR2 */
-   PCIC_WRITE(SH7751_PCIWCR1, wcr1);     /* PCIC WCR1 */
-   PCIC_WRITE(SH7751_PCIWCR2, wcr2);     /* PCIC WCR2 */
-   PCIC_WRITE(SH7751_PCIWCR3, wcr3);     /* PCIC WCR3 */
-   mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
-   PCIC_WRITE(SH7751_PCIMCR, mcr);      /* PCIC MCR */
-
-
-   /* Enable all interrupts, so we know what to fix */
-   PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
-   PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
-   /* Set up standard PCI config registers */
-   PCIC_WRITE(SH7751_PCICONF1, 	0xF39000C7); /* Bus Master, Mem & I/O access */
-   PCIC_WRITE(SH7751_PCICONF2, 	0x00000000); /* PCI Class code & Revision ID */
-   PCIC_WRITE(SH7751_PCICONF4, 	0xab000001); /* PCI I/O address (local regs) */
-   PCIC_WRITE(SH7751_PCICONF5, 	0x0c000000); /* PCI MEM address (local RAM)  */
-   PCIC_WRITE(SH7751_PCICONF6, 	0xd0000000); /* PCI MEM address (unused)     */
-   PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
-   PCIC_WRITE(SH7751_PCILSR0, 0x03f00000);   /* MEM (full 64M exposed)       */
-   PCIC_WRITE(SH7751_PCILSR1, 0x00000000);   /* MEM (unused)                 */
-   PCIC_WRITE(SH7751_PCILAR0, 0x0c000000);   /* MEM (direct map from PCI)    */
-   PCIC_WRITE(SH7751_PCILAR1, 0x00000000);   /* MEM (unused)                 */
-
-   /* Now turn it on... */
-   PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
-   /*
-    * Set PCIMBR and PCIIOBR here, assuming a single window
-    * (16M MEM, 256K IO) is enough.  If a larger space is
-    * needed, the readx/writex and inx/outx functions will
-    * have to do more (e.g. setting registers for each call).
-    */
-
-   /*
-    * Set the MBR so PCI address is one-to-one with window,
-    * meaning all calls go straight through... use BUG_ON to
-    * catch erroneous assumption.
-    */
-   BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
-
-   PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
-
-   /* Set IOBR for window containing area specified in pci.h */
-   PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
-
-   /* All done, may as well say so... */
-   printk("SH7751 PCI: Finished initialization of the PCI controller\n");
-
-   return 1;
-}
-
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
-{
-        switch (slot) {
-        case 0: return 13;
-        case 1: return 13; 	/* AMD Ethernet controller */
-        case 2: return -1;
-        case 3: return -1;
-        case 4: return -1;
-        default:
-                printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
-                return -1;
-        }
-}
-
-static struct resource sh7751_io_resource = {
-	.name   = "SH7751 IO",
-	.start  = SH7751_PCI_IO_BASE,
-	.end    = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
-	.flags  = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
-	.name   = "SH7751 mem",
-	.start  = SH7751_PCI_MEMORY_BASE,
-	.end    = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
-	.flags  = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
-	{ NULL, NULL, NULL, 0, 0 },
-};
-
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
index 66ad292..b8d43b6 100644
--- a/arch/sh/boards/mach-se/7780/irq.c
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -12,10 +12,13 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/irq.h>
+#include <linux/io.h>
 #include <mach-se/mach/se7780.h>
 
+#define INTC_BASE	0xffd00000
+#define INTC_ICR1	(INTC_BASE+0x1c)
+
 /*
  * Initialize IRQ setting
  */
@@ -43,4 +46,24 @@ void __init init_se7780_IRQ(void)
 	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
 
 	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
+
+	/* ICR1: detect low level(for 2ndcut) */
+	ctrl_outl(0xAAAA0000, INTC_ICR1);
+
+	/*
+	 * FPGA PCISEL register initialize
+	 *
+	 *  CPU  || SLOT1 | SLOT2 | S-ATA | USB
+	 *  -------------------------------------
+	 *  INTA || INTA  | INTD  |  --   | INTB
+	 *  -------------------------------------
+	 *  INTB || INTB  | INTA  |  --   | INTC
+	 *  -------------------------------------
+	 *  INTC || INTC  | INTB  | INTA  |  --
+	 *  -------------------------------------
+	 *  INTD || INTD  | INTC  |  --   | INTA
+	 *  -------------------------------------
+	 */
+	ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
+	ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
 }
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
index 2de42ba..b537e23 100644
--- a/arch/sh/boards/mach-se/Makefile
+++ b/arch/sh/boards/mach-se/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= 7751/
 obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= 7780/
 obj-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= 7343/
 obj-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= 7721/
+obj-$(CONFIG_SH_7724_SOLUTION_ENGINE)	+= 7724/
diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
index 0a9266b..a8b9f84 100644
--- a/arch/sh/boards/mach-sh03/rtc.c
+++ b/arch/sh/boards/mach-sh03/rtc.c
@@ -35,13 +35,13 @@
 #define RTC_BUSY	1
 #define RTC_STOP	2
 
-extern spinlock_t rtc_lock;
+static DEFINE_SPINLOCK(sh03_rtc_lock);
 
 unsigned long get_cmos_time(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
 
-	spin_lock(&rtc_lock);
+	spin_lock(&sh03_rtc_lock);
  again:
 	do {
 		sec  = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10;
@@ -73,7 +73,7 @@ unsigned long get_cmos_time(void)
 		goto again;
 	}
 
-	spin_unlock(&rtc_lock);
+	spin_unlock(&sh03_rtc_lock);
 	return mktime(year, mon, day, hour, min, sec);
 }
 
@@ -91,7 +91,7 @@ static int set_rtc_mmss(unsigned long nowtime)
 	int i;
 
 	/* gets recalled with irq locally disabled */
-	spin_lock(&rtc_lock);
+	spin_lock(&sh03_rtc_lock);
 	for (i = 0 ; i < 1000000 ; i++)	/* may take up to 1 second... */
 		if (!(ctrl_inb(RTC_CTL) & RTC_BUSY))
 			break;
@@ -113,7 +113,7 @@ static int set_rtc_mmss(unsigned long nowtime)
 		       cmos_minutes, real_minutes);
 		retval = -1;
 	}
-	spin_unlock(&rtc_lock);
+	spin_unlock(&sh03_rtc_lock);
 
 	return retval;
 }
diff --git a/arch/sh/boards/mach-snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
index 0f48242..476650e 100644
--- a/arch/sh/boards/mach-snapgear/io.c
+++ b/arch/sh/boards/mach-snapgear/io.c
@@ -36,8 +36,6 @@ unsigned char snapgear_inb(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned char *)pci_ioaddr(port);
 	else
 		return (*port2adr(port)) & 0xff;
 }
@@ -48,8 +46,6 @@ unsigned char snapgear_inb_p(unsigned long port)
 
 	if (PXSEG(port))
 		v = *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-		v = *(volatile unsigned char *)pci_ioaddr(port);
 	else
 		v = (*port2adr(port))&0xff;
 	ctrl_delay();
@@ -60,8 +56,6 @@ unsigned short snapgear_inw(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned short *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned short *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
@@ -73,8 +67,6 @@ unsigned int snapgear_inl(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned long *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned int *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else
@@ -87,8 +79,6 @@ void snapgear_outb(unsigned char value, unsigned long port)
 
 	if (PXSEG(port))
 		*(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
 }
@@ -97,8 +87,6 @@ void snapgear_outb_p(unsigned char value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
 	else
 		*(port2adr(port)) = value;
 	ctrl_delay();
@@ -108,8 +96,6 @@ void snapgear_outw(unsigned short value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned short *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned short *)pci_ioaddr(port)) = value;
 	else if (port >= 0x2000)
 		*port2adr(port) = value;
 	else
@@ -120,8 +106,6 @@ void snapgear_outl(unsigned int value, unsigned long port)
 {
 	if (PXSEG(port))
 		*(volatile unsigned long *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned long*)pci_ioaddr(port)) = value;
 	else
 		maybebadio(port);
 }
diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c
index dec3db0..15577ff 100644
--- a/arch/sh/boards/mach-systemh/io.c
+++ b/arch/sh/boards/mach-systemh/io.c
@@ -35,8 +35,6 @@ unsigned char sh7751systemh_inb(unsigned long port)
 {
 	if (PXSEG(port))
 		return *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned char *)pci_ioaddr(port);
 	else if (port <= 0x3F1)
 		return *(volatile unsigned char *)ETHER_IOMAP(port);
 	else
@@ -49,8 +47,6 @@ unsigned char sh7751systemh_inb_p(unsigned long port)
 
         if (PXSEG(port))
                 v = *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-                v = *(volatile unsigned char *)pci_ioaddr(port);
 	else if (port <= 0x3F1)
 		v = *(volatile unsigned char *)ETHER_IOMAP(port);
 	else
@@ -63,8 +59,6 @@ unsigned short sh7751systemh_inw(unsigned long port)
 {
         if (PXSEG(port))
                 return *(volatile unsigned short *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned short *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else if (port <= 0x3F1)
@@ -78,8 +72,6 @@ unsigned int sh7751systemh_inl(unsigned long port)
 {
         if (PXSEG(port))
                 return *(volatile unsigned long *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned int *)pci_ioaddr(port);
 	else if (port >= 0x2000)
 		return *port2adr(port);
 	else if (port <= 0x3F1)
@@ -94,8 +86,6 @@ void sh7751systemh_outb(unsigned char value, unsigned long port)
 
         if (PXSEG(port))
                 *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
 	else if (port <= 0x3F1)
 		*(volatile unsigned char *)ETHER_IOMAP(port) = value;
 	else
@@ -106,8 +96,6 @@ void sh7751systemh_outb_p(unsigned char value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
 	else if (port <= 0x3F1)
 		*(volatile unsigned char *)ETHER_IOMAP(port) = value;
 	else
@@ -119,8 +107,6 @@ void sh7751systemh_outw(unsigned short value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned short *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned short *)pci_ioaddr(port)) = value;
 	else if (port >= 0x2000)
 		*port2adr(port) = value;
 	else if (port <= 0x3F1)
@@ -133,8 +119,6 @@ void sh7751systemh_outl(unsigned int value, unsigned long port)
 {
         if (PXSEG(port))
                 *(volatile unsigned long *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned long*)pci_ioaddr(port)) = value;
 	else
 		maybebadio(port);
 }
diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c
index 4badad4..0130e98 100644
--- a/arch/sh/boards/mach-titan/io.c
+++ b/arch/sh/boards/mach-titan/io.c
@@ -17,8 +17,6 @@ u8 titan_inb(unsigned long port)
 {
         if (PXSEG(port))
                 return ctrl_inb(port);
-        else if (is_pci_ioaddr(port))
-                return ctrl_inb(pci_ioaddr(port));
         return ctrl_inw(port2adr(port)) & 0xff;
 }
 
@@ -28,8 +26,6 @@ u8 titan_inb_p(unsigned long port)
 
         if (PXSEG(port))
                 v = ctrl_inb(port);
-        else if (is_pci_ioaddr(port))
-                v = ctrl_inb(pci_ioaddr(port));
         else
                 v = ctrl_inw(port2adr(port)) & 0xff;
         ctrl_delay();
@@ -40,8 +36,6 @@ u16 titan_inw(unsigned long port)
 {
         if (PXSEG(port))
                 return ctrl_inw(port);
-        else if (is_pci_ioaddr(port))
-                return ctrl_inw(pci_ioaddr(port));
         else if (port >= 0x2000)
                 return ctrl_inw(port2adr(port));
         else
@@ -53,8 +47,6 @@ u32 titan_inl(unsigned long port)
 {
         if (PXSEG(port))
                 return ctrl_inl(port);
-        else if (is_pci_ioaddr(port))
-                return ctrl_inl(pci_ioaddr(port));
         else if (port >= 0x2000)
                 return ctrl_inw(port2adr(port));
         else
@@ -66,8 +58,6 @@ void titan_outb(u8 value, unsigned long port)
 {
         if (PXSEG(port))
                 ctrl_outb(value, port);
-        else if (is_pci_ioaddr(port))
-                ctrl_outb(value, pci_ioaddr(port));
         else
                 ctrl_outw(value, port2adr(port));
 }
@@ -76,8 +66,6 @@ void titan_outb_p(u8 value, unsigned long port)
 {
         if (PXSEG(port))
                 ctrl_outb(value, port);
-        else if (is_pci_ioaddr(port))
-                ctrl_outb(value, pci_ioaddr(port));
         else
                 ctrl_outw(value, port2adr(port));
         ctrl_delay();
@@ -87,8 +75,6 @@ void titan_outw(u16 value, unsigned long port)
 {
         if (PXSEG(port))
                 ctrl_outw(value, port);
-        else if (is_pci_ioaddr(port))
-                ctrl_outw(value, pci_ioaddr(port));
         else if (port >= 0x2000)
                 ctrl_outw(value, port2adr(port));
         else
@@ -99,8 +85,6 @@ void titan_outl(u32 value, unsigned long port)
 {
         if (PXSEG(port))
                 ctrl_outl(value, port);
-        else if (is_pci_ioaddr(port))
-                ctrl_outl(value, pci_ioaddr(port));
         else
                 maybebadio(port);
 }
@@ -117,10 +101,8 @@ void titan_outsl(unsigned long port, const void *src, unsigned long count)
 
 void __iomem *titan_ioport_map(unsigned long port, unsigned int size)
 {
-	if (PXSEG(port) || is_pci_memaddr(port))
+	if (PXSEG(port))
 		return (void __iomem *)port;
-	else if (is_pci_ioaddr(port))
-		return (void __iomem *)pci_ioaddr(port);
 
 	return (void __iomem *)port2adr(port);
 }