Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (137 commits)
  sh: include empty zero page in romImage
  sh: Make associative cache writes fatal on all SH-4A parts.
  sh: Drop associative writes for SH-4 cache flushes.
  sh: Partial revert of copy/clear_user_highpage() optimizations.
  sh: Add default uImage rule for se7724, ap325rxa, and migor.
  sh: allow runtime pm without suspend/resume callbacks
  sh: mach-ecovec24: Remove un-defined settings for VPU
  sh: mach-ecovec24: LCDC drive ability become high
  sh: fix sh7724 VEU3F resource size
  serial: sh-sci: Fix too early port disabling.
  sh: pfc: pr_info() -> pr_debug() cleanups.
  sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines.
  sh: Improve kfr2r09 serial port setup code
  sh: Break out SuperH PFC code
  sh: Move KEYSC header file
  sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file
  sh: Add CPG save/restore code for sh7724 R-standby
  sh: Add SDHI power control support to Ecovec
  mfd: Add power control platform data to SDHI driver
  sh: mach-ecovec24: modify address map
  ...

5 files changed, 168 insertions, 31 deletions

diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index 02d21a3..4eb31ac 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -16,15 +16,17 @@
 #include <asm/io.h>
 #include <mach-se/mach/se7722.h>
 
+unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, };
+
 static void disable_se7722_irq(unsigned int irq)
 {
-	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+	unsigned int bit = (unsigned int)get_irq_chip_data(irq);
 	ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
 }
 
 static void enable_se7722_irq(unsigned int irq)
 {
-	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+	unsigned int bit = (unsigned int)get_irq_chip_data(irq);
 	ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
 }
 
@@ -38,18 +40,15 @@ static struct irq_chip se7722_irq_chip __read_mostly = {
 static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned short intv = ctrl_inw(IRQ01_STS);
-	struct irq_desc *ext_desc;
-	unsigned int ext_irq = SE7722_FPGA_IRQ_BASE;
+	unsigned int ext_irq = 0;
 
 	intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
 
-	while (intv) {
-		if (intv & 1) {
-			ext_desc = irq_desc + ext_irq;
-			handle_level_irq(ext_irq, ext_desc);
-		}
-		intv >>= 1;
-		ext_irq++;
+	for (; intv; intv >>= 1, ext_irq++) {
+		if (!(intv & 1))
+			continue;
+
+		generic_handle_irq(se7722_fpga_irq[ext_irq]);
 	}
 }
 
@@ -63,11 +62,18 @@ void __init init_se7722_IRQ(void)
 	ctrl_outw(0, IRQ01_MASK);       /* disable all irqs */
 	ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
 
-	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++)
-		set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i,
+	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
+		se7722_fpga_irq[i] = create_irq();
+		if (se7722_fpga_irq[i] < 0)
+			return;
+
+		set_irq_chip_and_handler_name(se7722_fpga_irq[i],
 					      &se7722_irq_chip,
 					      handle_level_irq, "level");
 
+		set_irq_chip_data(se7722_fpga_irq[i], (void *)i);
+	}
+
 	set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux);
 	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
 
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index 3637407..b1cb942 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/input.h>
+#include <linux/input/sh_keysc.h>
 #include <linux/smc91x.h>
 #include <mach-se/mach/se7722.h>
 #include <mach-se/mach/mrshpc.h>
@@ -21,7 +22,6 @@
 #include <asm/clock.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
-#include <asm/sh_keysc.h>
 #include <cpu/sh7722.h>
 
 /* Heartbeat */
@@ -60,8 +60,7 @@ static struct resource smc91x_eth_resources[] = {
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = SMC_IRQ,
-		.end    = SMC_IRQ,
+		/* Filled in later */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -90,8 +89,7 @@ static struct resource cf_ide_resources[] = {
 		.flags  = IORESOURCE_IO,
 	},
 	[2] = {
-		.start  = MRSHPC_IRQ0,
-		.end    = MRSHPC_IRQ0,
+		/* Filled in later */
 		.flags  = IORESOURCE_IRQ,
 	},
 };
@@ -153,6 +151,14 @@ static struct platform_device *se7722_devices[] __initdata = {
 static int __init se7722_devices_setup(void)
 {
 	mrshpc_setup_windows();
+
+	/* Wire-up dynamic vectors */
+	cf_ide_resources[2].start = cf_ide_resources[2].end =
+		se7722_fpga_irq[SE7722_FPGA_IRQ_MRSHPC0];
+
+	smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
+		se7722_fpga_irq[SE7722_FPGA_IRQ_SMC];
+
 	return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
 }
 device_initcall(se7722_devices_setup);
@@ -193,6 +199,5 @@ static void __init se7722_setup(char **cmdline_p)
 static struct sh_machine_vector mv_se7722 __initmv = {
 	.mv_name                = "Solution Engine 7722" ,
 	.mv_setup               = se7722_setup ,
-	.mv_nr_irqs		= SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR,
 	.mv_init_irq		= init_se7722_IRQ,
 };
diff --git a/arch/sh/boards/mach-se/7724/Makefile b/arch/sh/boards/mach-se/7724/Makefile
index 349cbd6..a08b368 100644
--- a/arch/sh/boards/mach-se/7724/Makefile
+++ b/arch/sh/boards/mach-se/7724/Makefile
@@ -7,4 +7,4 @@
 #
 #
 
-obj-y	 := setup.o irq.o
\ No newline at end of file
+obj-y	 := setup.o irq.o sdram.o
diff --git a/arch/sh/boards/mach-se/7724/sdram.S b/arch/sh/boards/mach-se/7724/sdram.S
new file mode 100644
index 0000000..9040167
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/sdram.S
@@ -0,0 +1,52 @@
+/*
+ * MS7724SE sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(ms7724se_sdram_enter_start)
+
+	/* DBSC: put memory in self-refresh mode */
+
+	ED 0xFD000010, 0x00000000 /* DBEN */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(ms7724se_sdram_enter_end)
+
+	.balign 4
+ENTRY(ms7724se_sdram_leave_start)
+
+	/* DBSC: put memory in auto-refresh mode */
+
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	WAIT 1
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(ms7724se_sdram_leave_end)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 0894bba..4b0f0c0 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -19,6 +19,7 @@
 #include <linux/smc91x.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
@@ -27,7 +28,7 @@
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
 #include <asm/clock.h>
-#include <asm/sh_keysc.h>
+#include <asm/suspend.h>
 #include <cpu/sh7724.h>
 #include <mach-se/mach/se7724.h>
 
@@ -451,6 +452,52 @@ static struct platform_device sh7724_usb1_gadget_device = {
 	.resource	= sh7724_usb1_gadget_resources,
 };
 
+static struct resource sdhi0_cn7_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0x04ce0000,
+		.end    = 0x04ce01ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 101,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_cn7_device = {
+	.name           = "sh_mobile_sdhi",
+	.id		= 0,
+	.num_resources  = ARRAY_SIZE(sdhi0_cn7_resources),
+	.resource       = sdhi0_cn7_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_SDHI0,
+	},
+};
+
+static struct resource sdhi1_cn8_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0x04cf0000,
+		.end    = 0x04cf01ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 24,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_cn8_device = {
+	.name           = "sh_mobile_sdhi",
+	.id		= 1,
+	.num_resources  = ARRAY_SIZE(sdhi1_cn8_resources),
+	.resource       = sdhi1_cn8_resources,
+	.archdata = {
+		.hwblk_id = HWBLK_SDHI1,
+	},
+};
+
 static struct platform_device *ms7724se_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
@@ -463,6 +510,8 @@ static struct platform_device *ms7724se_devices[] __initdata = {
 	&sh7724_usb0_host_device,
 	&sh7724_usb1_gadget_device,
 	&fsi_device,
+	&sdhi0_cn7_device,
+	&sdhi1_cn8_device,
 };
 
 #define EEPROM_OP   0xBA206000
@@ -487,7 +536,7 @@ static int __init sh_eth_is_eeprom_ready(void)
 static void __init sh_eth_init(void)
 {
 	int i;
-	u16 mac[3];
+	u16 mac;
 
 	/* check EEPROM status */
 	if (!sh_eth_is_eeprom_ready())
@@ -501,16 +550,10 @@ static void __init sh_eth_init(void)
 		if (!sh_eth_is_eeprom_ready())
 			return;
 
-		mac[i] = ctrl_inw(EEPROM_DATA);
-		mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+		mac = ctrl_inw(EEPROM_DATA);
+		sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
+		sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
 	}
-
-	/* reset sh-eth */
-	ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
-
-	/* set MAC addr */
-	ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
-	ctrl_outl((mac[2]), SH_ETH_MALR);
 }
 
 #define SW4140    0xBA201000
@@ -527,11 +570,22 @@ static void __init sh_eth_init(void)
 #define SW41_G    0x4000
 #define SW41_H    0x8000
 
+extern char ms7724se_sdram_enter_start;
+extern char ms7724se_sdram_enter_end;
+extern char ms7724se_sdram_leave_start;
+extern char ms7724se_sdram_leave_end;
+
 static int __init devices_setup(void)
 {
 	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
 	struct clk *fsia_clk;
 
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+					&ms7724se_sdram_enter_start,
+					&ms7724se_sdram_enter_end,
+					&ms7724se_sdram_leave_start,
+					&ms7724se_sdram_leave_end);
 	/* Reset Release */
 	ctrl_outw(ctrl_inw(FPGA_OUT) &
 		  ~((1 << 1)  | /* LAN */
@@ -701,6 +755,26 @@ static int __init devices_setup(void)
 	clk_set_rate(&fsimcka_clk, 11000);
 	clk_put(fsia_clk);
 
+	/* SDHI0 connected to cn7 */
+	gpio_request(GPIO_FN_SDHI0CD, NULL);
+	gpio_request(GPIO_FN_SDHI0WP, NULL);
+	gpio_request(GPIO_FN_SDHI0D3, NULL);
+	gpio_request(GPIO_FN_SDHI0D2, NULL);
+	gpio_request(GPIO_FN_SDHI0D1, NULL);
+	gpio_request(GPIO_FN_SDHI0D0, NULL);
+	gpio_request(GPIO_FN_SDHI0CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
+	/* SDHI1 connected to cn8 */
+	gpio_request(GPIO_FN_SDHI1CD, NULL);
+	gpio_request(GPIO_FN_SDHI1WP, NULL);
+	gpio_request(GPIO_FN_SDHI1D3, NULL);
+	gpio_request(GPIO_FN_SDHI1D2, NULL);
+	gpio_request(GPIO_FN_SDHI1D1, NULL);
+	gpio_request(GPIO_FN_SDHI1D0, NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
 	/*
 	 * enable SH-Eth
 	 *