diff options
| author | Tony Lindgren <tony@atomide.com> | 2010-03-01 14:19:05 -0800 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2010-03-01 14:19:05 -0800 |
| commit | d702d12167a2c05a346f49aac7a311d597762495 (patch) | |
| tree | baae42c299cce34d6df24b5d01f8b1d0b481bd9a /arch/sh/boards/mach-kfr2r09/setup.c | |
| parent | 9418c65f9bd861d0f7e39aab9cfb3aa6f2275d11 (diff) | |
| parent | ac0f6f927db539e03e1f3f61bcd4ed57d5cde7a9 (diff) | |
| download | op-kernel-dev-d702d12167a2c05a346f49aac7a311d597762495.zip op-kernel-dev-d702d12167a2c05a346f49aac7a311d597762495.tar.gz | |
Merge with mainline to remove plat-omap/Kconfig conflict
Conflicts:
arch/arm/plat-omap/Kconfig
Diffstat (limited to 'arch/sh/boards/mach-kfr2r09/setup.c')
| -rw-r--r-- | arch/sh/boards/mach-kfr2r09/setup.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 5d7b5d9..b2cd0ed 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -282,7 +282,7 @@ static int camera_power(struct device *dev, int mode) * use 1.8 V for VccQ_VIO * use 2.85V for VccQ_SR */ - ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB); + __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB); /* reset clear */ ret = gpio_request(GPIO_PTB4, NULL); @@ -351,7 +351,7 @@ static struct resource kfr2r09_sh_sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 101, + .start = 100, .flags = IORESOURCE_IRQ, }, }; @@ -492,13 +492,13 @@ static int kfr2r09_usb0_gadget_setup(void) if (kfr2r09_usb0_gadget_i2c_setup() != 0) return -ENODEV; /* unable to configure using i2c */ - ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); + __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */ gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */ gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */ msleep(20); /* wait 20ms to let the clock settle */ clk_enable(clk_get(NULL, "usb0")); - ctrl_outw(0x0600, 0xa40501d4); + __raw_writew(0x0600, 0xa40501d4); return 0; } @@ -526,12 +526,12 @@ static int __init kfr2r09_devices_setup(void) gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */ /* setup NOR flash at CS0 */ - ctrl_outl(0x36db0400, BSC_CS0BCR); - ctrl_outl(0x00000500, BSC_CS0WCR); + __raw_writel(0x36db0400, BSC_CS0BCR); + __raw_writel(0x00000500, BSC_CS0WCR); /* setup NAND flash at CS4 */ - ctrl_outl(0x36db0400, BSC_CS4BCR); - ctrl_outl(0x00000500, BSC_CS4WCR); + __raw_writel(0x36db0400, BSC_CS4BCR); + __raw_writel(0x00000500, BSC_CS4WCR); /* setup KEYSC pins */ gpio_request(GPIO_FN_KEYOUT0, NULL); |
