[S390] rework smp code

Define struct pcpu and merge some of the NR_CPUS arrays into it, including
__cpu_logical_map, current_set and smp_cpu_state. Split smp related
functions to those operating on physical cpus and the functions operating
on a logical cpu number. Make the functions for physical cpus use a
pointer to a struct pcpu. This hides the knowledge about cpu addresses in
smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header.

The PSW restart mechanism is used to start secondary cpus, calling a
function on an online cpu, calling a function on the ipl cpu, and for
the nmi signal. Replace the different assembler functions with a
single function restart_int_handler. The new entry point calls a function
whose pointer is stored in the lowcore of the target cpu and it can wait
for the source cpu to stop. This covers all existing use cases.

Overall the code is now simpler and there are ~380 lines less code.

Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

1 files changed, 17 insertions, 64 deletions

diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 5f437b8..6143521 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -2,7 +2,7 @@
  *  arch/s390/kernel/entry.S
  *    S390 low-level entry points.
  *
- *    Copyright (C) IBM Corp. 1999,2006
+ *    Copyright (C) IBM Corp. 1999,2012
  *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
  *		 Hartmut Penner (hp@de.ibm.com),
  *		 Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
@@ -691,77 +691,30 @@ mcck_panic:
 0:	ahi	%r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
 	j	mcck_skip
 
-/*
- * Restart interruption handler, kick starter for additional CPUs
- */
-#ifdef CONFIG_SMP
-	__CPUINIT
-ENTRY(restart_int_handler)
-	basr	%r1,0
-restart_base:
-	spt	restart_vtime-restart_base(%r1)
-	stck	__LC_LAST_UPDATE_CLOCK
-	mvc	__LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
-	mvc	__LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
-	l	%r15,__LC_GPREGS_SAVE_AREA+60 # load ksp
-	lctl	%c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs
-	lam	%a0,%a15,__LC_AREGS_SAVE_AREA
-	lm	%r6,%r15,__SF_GPRS(%r15)# load registers from clone
-	l	%r1,__LC_THREAD_INFO
-	mvc	__LC_USER_TIMER(8),__TI_user_timer(%r1)
-	mvc	__LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
-	xc	__LC_STEAL_TIMER(8),__LC_STEAL_TIMER
-	ssm	__LC_PGM_NEW_PSW	# turn dat on, keep irqs off
-	basr	%r14,0
-	l	%r14,restart_addr-.(%r14)
-	basr	%r14,%r14		# call start_secondary
-restart_addr:
-	.long	start_secondary
-	.align	8
-restart_vtime:
-	.long	0x7fffffff,0xffffffff
-	.previous
-#else
-/*
- * If we do not run with SMP enabled, let the new CPU crash ...
- */
-ENTRY(restart_int_handler)
-	basr	%r1,0
-restart_base:
-	lpsw	restart_crash-restart_base(%r1)
-	.align	8
-restart_crash:
-	.long	0x000a0000,0x00000000
-restart_go:
-#endif
-
 #
 # PSW restart interrupt handler
 #
-ENTRY(psw_restart_int_handler)
+ENTRY(restart_int_handler)
 	st	%r15,__LC_SAVE_AREA_RESTART
-	basr	%r15,0
-0:	l	%r15,.Lrestart_stack-0b(%r15)	# load restart stack
-	l	%r15,0(%r15)
+	l	%r15,__LC_RESTART_STACK
 	ahi	%r15,-__PT_SIZE			# create pt_regs on stack
+	xc	0(__PT_SIZE,%r15),0(%r15)
 	stm	%r0,%r14,__PT_R0(%r15)
 	mvc	__PT_R15(4,%r15),__LC_SAVE_AREA_RESTART
 	mvc	__PT_PSW(8,%r15),__LC_RST_OLD_PSW # store restart old psw
-	ahi	%r15,-STACK_FRAME_OVERHEAD
-	xc	__SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
-	basr	%r14,0
-1:	l	%r14,.Ldo_restart-1b(%r14)
-	basr	%r14,%r14
-	basr	%r14,0				# load disabled wait PSW if
-2:	lpsw	restart_psw_crash-2b(%r14)	# do_restart returns
-	.align 4
-.Ldo_restart:
-	.long	do_restart
-.Lrestart_stack:
-	.long	restart_stack
-	.align 8
-restart_psw_crash:
-	.long	0x000a0000,0x00000000 + restart_psw_crash
+	ahi	%r15,-STACK_FRAME_OVERHEAD	# create stack frame on stack
+	xc	0(STACK_FRAME_OVERHEAD,%r15),0(%r15)
+	lm	%r1,%r3,__LC_RESTART_FN		# load fn, parm & source cpu
+	ltr	%r3,%r3				# test source cpu address
+	jm	1f				# negative -> skip source stop
+0:	sigp	%r4,%r3,1			# sigp sense to source cpu
+	brc	10,0b				# wait for status stored
+1:	basr	%r14,%r1			# call function
+	stap	__SF_EMPTY(%r15)		# store cpu address
+	lh	%r3,__SF_EMPTY(%r15)
+2:	sigp	%r4,%r3,5			# sigp stop to current cpu
+	brc	2,2b
+3:	j	3b
 
 	.section .kprobes.text, "ax"