s390/pci: base support

Add PCI support for s390, (only 64 bit mode is supported by hardware):
- PCI facility tests
- PCI instructions: pcilg, pcistg, pcistb, stpcifc, mpcifc, rpcit
- map readb/w/l/q and writeb/w/l/q to pcilg and pcistg instructions
- pci_iomap implementation
- memcpy_fromio/toio
- pci_root_ops using special pcilg/pcistg
- device, bus and domain allocation

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

4 files changed, 603 insertions, 8 deletions

diff --git a/arch/s390/include/asm/io.h b/arch/s390/include/asm/io.h
index 559e921..16c3eb1 100644
--- a/arch/s390/include/asm/io.h
+++ b/arch/s390/include/asm/io.h
@@ -9,9 +9,9 @@
 #ifndef _S390_IO_H
 #define _S390_IO_H
 
+#include <linux/kernel.h>
 #include <asm/page.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
+#include <asm/pci_io.h>
 
 /*
  * Change virtual addresses to physical addresses and vv.
@@ -24,10 +24,11 @@ static inline unsigned long virt_to_phys(volatile void * address)
 		 "	lra	%0,0(%1)\n"
 		 "	jz	0f\n"
 		 "	la	%0,0\n"
-                 "0:"
+		 "0:"
 		 : "=a" (real_address) : "a" (address) : "cc");
-        return real_address;
+	return real_address;
 }
+#define virt_to_phys virt_to_phys
 
 static inline void * phys_to_virt(unsigned long address)
 {
@@ -42,4 +43,50 @@ void unxlate_dev_mem_ptr(unsigned long phys, void *addr);
  */
 #define xlate_dev_kmem_ptr(p)	p
 
+#define IO_SPACE_LIMIT 0
+
+#ifdef CONFIG_PCI
+
+#define ioremap_nocache(addr, size)	ioremap(addr, size)
+#define ioremap_wc			ioremap_nocache
+
+/* TODO: s390 cannot support io_remap_pfn_range... */
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) 	       \
+	remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
+{
+	return (void __iomem *) offset;
+}
+
+static inline void iounmap(volatile void __iomem *addr)
+{
+}
+
+/*
+ * s390 needs a private implementation of pci_iomap since ioremap with its
+ * offset parameter isn't sufficient. That's because BAR spaces are not
+ * disjunctive on s390 so we need the bar parameter of pci_iomap to find
+ * the corresponding device and create the mapping cookie.
+ */
+#define pci_iomap pci_iomap
+#define pci_iounmap pci_iounmap
+
+#define memcpy_fromio(dst, src, count)	zpci_memcpy_fromio(dst, src, count)
+#define memcpy_toio(dst, src, count)	zpci_memcpy_toio(dst, src, count)
+#define memset_io(dst, val, count)	zpci_memset_io(dst, val, count)
+
+#define __raw_readb	zpci_read_u8
+#define __raw_readw	zpci_read_u16
+#define __raw_readl	zpci_read_u32
+#define __raw_readq	zpci_read_u64
+#define __raw_writeb	zpci_write_u8
+#define __raw_writew	zpci_write_u16
+#define __raw_writel	zpci_write_u32
+#define __raw_writeq	zpci_write_u64
+
+#endif /* CONFIG_PCI */
+
+#include <asm-generic/io.h>
+
 #endif
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index 42a145c..ff7b359 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -1,10 +1,84 @@
 #ifndef __ASM_S390_PCI_H
 #define __ASM_S390_PCI_H
 
-/* S/390 systems don't have a PCI bus. This file is just here because some stupid .c code
- * includes it even if CONFIG_PCI is not set.
- */
+/* must be set before including asm-generic/pci.h */
 #define PCI_DMA_BUS_IS_PHYS (0)
+/* must be set before including pci_clp.h */
+#define PCI_BAR_COUNT	6
 
-#endif /* __ASM_S390_PCI_H */
+#include <asm-generic/pci.h>
+#include <asm-generic/pci-dma-compat.h>
 
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+#define pcibios_assign_all_busses()	(0)
+
+void __iomem *pci_iomap(struct pci_dev *, int, unsigned long);
+void pci_iounmap(struct pci_dev *, void __iomem *);
+int pci_domain_nr(struct pci_bus *);
+int pci_proc_domain(struct pci_bus *);
+
+#define ZPCI_BUS_NR			0	/* default bus number */
+#define ZPCI_DEVFN			0	/* default device number */
+
+/* PCI Function Controls */
+#define ZPCI_FC_FN_ENABLED		0x80
+#define ZPCI_FC_ERROR			0x40
+#define ZPCI_FC_BLOCKED			0x20
+#define ZPCI_FC_DMA_ENABLED		0x10
+
+enum zpci_state {
+	ZPCI_FN_STATE_RESERVED,
+	ZPCI_FN_STATE_STANDBY,
+	ZPCI_FN_STATE_CONFIGURED,
+	ZPCI_FN_STATE_ONLINE,
+	NR_ZPCI_FN_STATES,
+};
+
+struct zpci_bar_struct {
+	u32		val;		/* bar start & 3 flag bits */
+	u8		size;		/* order 2 exponent */
+	u16		map_idx;	/* index into bar mapping array */
+};
+
+/* Private data per function */
+struct zpci_dev {
+	struct pci_dev	*pdev;
+	struct pci_bus	*bus;
+	struct list_head entry;		/* list of all zpci_devices, needed for hotplug, etc. */
+
+	enum zpci_state state;
+	u32		fid;		/* function ID, used by sclp */
+	u32		fh;		/* function handle, used by insn's */
+	u16		pchid;		/* physical channel ID */
+	u8		pfgid;		/* function group ID */
+	u16		domain;
+
+	struct zpci_bar_struct bars[PCI_BAR_COUNT];
+
+	enum pci_bus_speed max_bus_speed;
+};
+
+static inline bool zdev_enabled(struct zpci_dev *zdev)
+{
+	return (zdev->fh & (1UL << 31)) ? true : false;
+}
+
+/* -----------------------------------------------------------------------------
+  Prototypes
+----------------------------------------------------------------------------- */
+/* Base stuff */
+struct zpci_dev *zpci_alloc_device(void);
+int zpci_create_device(struct zpci_dev *);
+int zpci_enable_device(struct zpci_dev *);
+void zpci_stop_device(struct zpci_dev *);
+void zpci_free_device(struct zpci_dev *);
+int zpci_scan_device(struct zpci_dev *);
+
+/* Helpers */
+struct zpci_dev *get_zdev(struct pci_dev *);
+struct zpci_dev *get_zdev_by_fid(u32);
+bool zpci_fid_present(u32);
+
+#endif
diff --git a/arch/s390/include/asm/pci_insn.h b/arch/s390/include/asm/pci_insn.h
new file mode 100644
index 0000000..15b88b9
--- /dev/null
+++ b/arch/s390/include/asm/pci_insn.h
@@ -0,0 +1,280 @@
+#ifndef _ASM_S390_PCI_INSN_H
+#define _ASM_S390_PCI_INSN_H
+
+#include <linux/delay.h>
+
+#define ZPCI_INSN_BUSY_DELAY	1	/* 1 millisecond */
+
+/* Load/Store status codes */
+#define ZPCI_PCI_ST_FUNC_NOT_ENABLED		4
+#define ZPCI_PCI_ST_FUNC_IN_ERR			8
+#define ZPCI_PCI_ST_BLOCKED			12
+#define ZPCI_PCI_ST_INSUF_RES			16
+#define ZPCI_PCI_ST_INVAL_AS			20
+#define ZPCI_PCI_ST_FUNC_ALREADY_ENABLED	24
+#define ZPCI_PCI_ST_DMA_AS_NOT_ENABLED		28
+#define ZPCI_PCI_ST_2ND_OP_IN_INV_AS		36
+#define ZPCI_PCI_ST_FUNC_NOT_AVAIL		40
+#define ZPCI_PCI_ST_ALREADY_IN_RQ_STATE		44
+
+/* Load/Store return codes */
+#define ZPCI_PCI_LS_OK				0
+#define ZPCI_PCI_LS_ERR				1
+#define ZPCI_PCI_LS_BUSY			2
+#define ZPCI_PCI_LS_INVAL_HANDLE		3
+
+/* Load/Store address space identifiers */
+#define ZPCI_PCIAS_MEMIO_0			0
+#define ZPCI_PCIAS_MEMIO_1			1
+#define ZPCI_PCIAS_MEMIO_2			2
+#define ZPCI_PCIAS_MEMIO_3			3
+#define ZPCI_PCIAS_MEMIO_4			4
+#define ZPCI_PCIAS_MEMIO_5			5
+#define ZPCI_PCIAS_CFGSPC			15
+
+/* Modify PCI Function Controls */
+#define ZPCI_MOD_FC_REG_INT	2
+#define ZPCI_MOD_FC_DEREG_INT	3
+#define ZPCI_MOD_FC_REG_IOAT	4
+#define ZPCI_MOD_FC_DEREG_IOAT	5
+#define ZPCI_MOD_FC_REREG_IOAT	6
+#define ZPCI_MOD_FC_RESET_ERROR	7
+#define ZPCI_MOD_FC_RESET_BLOCK	9
+#define ZPCI_MOD_FC_SET_MEASURE	10
+
+/* FIB function controls */
+#define ZPCI_FIB_FC_ENABLED	0x80
+#define ZPCI_FIB_FC_ERROR	0x40
+#define ZPCI_FIB_FC_LS_BLOCKED	0x20
+#define ZPCI_FIB_FC_DMAAS_REG	0x10
+
+/* FIB function controls */
+#define ZPCI_FIB_FC_ENABLED	0x80
+#define ZPCI_FIB_FC_ERROR	0x40
+#define ZPCI_FIB_FC_LS_BLOCKED	0x20
+#define ZPCI_FIB_FC_DMAAS_REG	0x10
+
+/* Function Information Block */
+struct zpci_fib {
+	u32 fmt		:  8;	/* format */
+	u32		: 24;
+	u32 reserved1;
+	u8 fc;			/* function controls */
+	u8 reserved2;
+	u16 reserved3;
+	u32 reserved4;
+	u64 pba;		/* PCI base address */
+	u64 pal;		/* PCI address limit */
+	u64 iota;		/* I/O Translation Anchor */
+	u32		:  1;
+	u32 isc		:  3;	/* Interrupt subclass */
+	u32 noi		: 12;	/* Number of interrupts */
+	u32		:  2;
+	u32 aibvo	:  6;	/* Adapter interrupt bit vector offset */
+	u32 sum		:  1;	/* Adapter int summary bit enabled */
+	u32		:  1;
+	u32 aisbo	:  6;	/* Adapter int summary bit offset */
+	u32 reserved5;
+	u64 aibv;		/* Adapter int bit vector address */
+	u64 aisb;		/* Adapter int summary bit address */
+	u64 fmb_addr;		/* Function measurement block address and key */
+	u64 reserved6;
+	u64 reserved7;
+} __packed;
+
+/* Modify PCI Function Controls */
+static inline u8 __mpcifc(u64 req, struct zpci_fib *fib, u8 *status)
+{
+	u8 cc;
+
+	asm volatile (
+		"	.insn	rxy,0xe300000000d0,%[req],%[fib]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=d" (cc), [req] "+d" (req), [fib] "+Q" (*fib)
+		: : "cc");
+	*status = req >> 24 & 0xff;
+	return cc;
+}
+
+static inline int mpcifc_instr(u64 req, struct zpci_fib *fib)
+{
+	u8 cc, status;
+
+	do {
+		cc = __mpcifc(req, fib, &status);
+		if (cc == 2)
+			msleep(ZPCI_INSN_BUSY_DELAY);
+	} while (cc == 2);
+
+	if (cc)
+		printk_once(KERN_ERR "%s: error cc: %d  status: %d\n",
+			     __func__, cc, status);
+	return (cc) ? -EIO : 0;
+}
+
+/* Refresh PCI Translations */
+static inline u8 __rpcit(u64 fn, u64 addr, u64 range, u8 *status)
+{
+	register u64 __addr asm("2") = addr;
+	register u64 __range asm("3") = range;
+	u8 cc;
+
+	asm volatile (
+		"	.insn	rre,0xb9d30000,%[fn],%[addr]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=d" (cc), [fn] "+d" (fn)
+		: [addr] "d" (__addr), "d" (__range)
+		: "cc");
+	*status = fn >> 24 & 0xff;
+	return cc;
+}
+
+static inline int rpcit_instr(u64 fn, u64 addr, u64 range)
+{
+	u8 cc, status;
+
+	do {
+		cc = __rpcit(fn, addr, range, &status);
+		if (cc == 2)
+			msleep(ZPCI_INSN_BUSY_DELAY);
+	} while (cc == 2);
+
+	if (cc)
+		printk_once(KERN_ERR "%s: error cc: %d  status: %d  dma_addr: %Lx  size: %Lx\n",
+			    __func__, cc, status, addr, range);
+	return (cc) ? -EIO : 0;
+}
+
+/* Store PCI function controls */
+static inline u8 __stpcifc(u32 handle, u8 space, struct zpci_fib *fib, u8 *status)
+{
+	u64 fn = (u64) handle << 32 | space << 16;
+	u8 cc;
+
+	asm volatile (
+		"	.insn	rxy,0xe300000000d4,%[fn],%[fib]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=d" (cc), [fn] "+d" (fn), [fib] "=m" (*fib)
+		: : "cc");
+	*status = fn >> 24 & 0xff;
+	return cc;
+}
+
+/* Set Interruption Controls */
+static inline void sic_instr(u16 ctl, char *unused, u8 isc)
+{
+	asm volatile (
+		"	.insn	rsy,0xeb00000000d1,%[ctl],%[isc],%[u]\n"
+		: : [ctl] "d" (ctl), [isc] "d" (isc << 27), [u] "Q" (*unused));
+}
+
+/* PCI Load */
+static inline u8 __pcilg(u64 *data, u64 req, u64 offset, u8 *status)
+{
+	register u64 __req asm("2") = req;
+	register u64 __offset asm("3") = offset;
+	u64 __data;
+	u8 cc;
+
+	asm volatile (
+		"	.insn	rre,0xb9d20000,%[data],%[req]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=d" (cc), [data] "=d" (__data), [req] "+d" (__req)
+		:  "d" (__offset)
+		: "cc");
+	*status = __req >> 24 & 0xff;
+	*data = __data;
+	return cc;
+}
+
+static inline int pcilg_instr(u64 *data, u64 req, u64 offset)
+{
+	u8 cc, status;
+
+	do {
+		cc = __pcilg(data, req, offset, &status);
+		if (cc == 2)
+			msleep(ZPCI_INSN_BUSY_DELAY);
+	} while (cc == 2);
+
+	if (cc) {
+		printk_once(KERN_ERR "%s: error cc: %d  status: %d  req: %Lx  offset: %Lx\n",
+			    __func__, cc, status, req, offset);
+		/* TODO: on IO errors set data to 0xff...
+		 * here or in users of pcilg (le conversion)?
+		 */
+	}
+	return (cc) ? -EIO : 0;
+}
+
+/* PCI Store */
+static inline u8 __pcistg(u64 data, u64 req, u64 offset, u8 *status)
+{
+	register u64 __req asm("2") = req;
+	register u64 __offset asm("3") = offset;
+	u8 cc;
+
+	asm volatile (
+		"	.insn	rre,0xb9d00000,%[data],%[req]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=d" (cc), [req] "+d" (__req)
+		: "d" (__offset), [data] "d" (data)
+		: "cc");
+	*status = __req >> 24 & 0xff;
+	return cc;
+}
+
+static inline int pcistg_instr(u64 data, u64 req, u64 offset)
+{
+	u8 cc, status;
+
+	do {
+		cc = __pcistg(data, req, offset, &status);
+		if (cc == 2)
+			msleep(ZPCI_INSN_BUSY_DELAY);
+	} while (cc == 2);
+
+	if (cc)
+		printk_once(KERN_ERR "%s: error cc: %d  status: %d  req: %Lx  offset: %Lx\n",
+			__func__, cc, status, req, offset);
+	return (cc) ? -EIO : 0;
+}
+
+/* PCI Store Block */
+static inline u8 __pcistb(const u64 *data, u64 req, u64 offset, u8 *status)
+{
+	u8 cc;
+
+	asm volatile (
+		"	.insn	rsy,0xeb00000000d0,%[req],%[offset],%[data]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=d" (cc), [req] "+d" (req)
+		: [offset] "d" (offset), [data] "Q" (*data)
+		: "cc");
+	*status = req >> 24 & 0xff;
+	return cc;
+}
+
+static inline int pcistb_instr(const u64 *data, u64 req, u64 offset)
+{
+	u8 cc, status;
+
+	do {
+		cc = __pcistb(data, req, offset, &status);
+		if (cc == 2)
+			msleep(ZPCI_INSN_BUSY_DELAY);
+	} while (cc == 2);
+
+	if (cc)
+		printk_once(KERN_ERR "%s: error cc: %d  status: %d  req: %Lx  offset: %Lx\n",
+			    __func__, cc, status, req, offset);
+	return (cc) ? -EIO : 0;
+}
+
+#endif
diff --git a/arch/s390/include/asm/pci_io.h b/arch/s390/include/asm/pci_io.h
new file mode 100644
index 0000000..5fd81f3
--- /dev/null
+++ b/arch/s390/include/asm/pci_io.h
@@ -0,0 +1,194 @@
+#ifndef _ASM_S390_PCI_IO_H
+#define _ASM_S390_PCI_IO_H
+
+#ifdef CONFIG_PCI
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <asm/pci_insn.h>
+
+/* I/O Map */
+#define ZPCI_IOMAP_MAX_ENTRIES		0x7fff
+#define ZPCI_IOMAP_ADDR_BASE		0x8000000000000000ULL
+#define ZPCI_IOMAP_ADDR_IDX_MASK	0x7fff000000000000ULL
+#define ZPCI_IOMAP_ADDR_OFF_MASK	0x0000ffffffffffffULL
+
+struct zpci_iomap_entry {
+	u32 fh;
+	u8 bar;
+};
+
+extern struct zpci_iomap_entry *zpci_iomap_start;
+
+#define ZPCI_IDX(addr)								\
+	(((__force u64) addr & ZPCI_IOMAP_ADDR_IDX_MASK) >> 48)
+#define ZPCI_OFFSET(addr)							\
+	((__force u64) addr & ZPCI_IOMAP_ADDR_OFF_MASK)
+
+#define ZPCI_CREATE_REQ(handle, space, len)					\
+	((u64) handle << 32 | space << 16 | len)
+
+#define zpci_read(LENGTH, RETTYPE)						\
+static inline RETTYPE zpci_read_##RETTYPE(const volatile void __iomem *addr)	\
+{										\
+	struct zpci_iomap_entry *entry = &zpci_iomap_start[ZPCI_IDX(addr)];	\
+	u64 req = ZPCI_CREATE_REQ(entry->fh, entry->bar, LENGTH);		\
+	u64 data;								\
+	int rc;									\
+										\
+	rc = pcilg_instr(&data, req, ZPCI_OFFSET(addr));			\
+	if (rc)									\
+		data = -1ULL;							\
+	return (RETTYPE) data;							\
+}
+
+#define zpci_write(LENGTH, VALTYPE)						\
+static inline void zpci_write_##VALTYPE(VALTYPE val,				\
+					const volatile void __iomem *addr)	\
+{										\
+	struct zpci_iomap_entry *entry = &zpci_iomap_start[ZPCI_IDX(addr)];	\
+	u64 req = ZPCI_CREATE_REQ(entry->fh, entry->bar, LENGTH);		\
+	u64 data = (VALTYPE) val;						\
+										\
+	pcistg_instr(data, req, ZPCI_OFFSET(addr));				\
+}
+
+zpci_read(8, u64)
+zpci_read(4, u32)
+zpci_read(2, u16)
+zpci_read(1, u8)
+zpci_write(8, u64)
+zpci_write(4, u32)
+zpci_write(2, u16)
+zpci_write(1, u8)
+
+static inline int zpci_write_single(u64 req, const u64 *data, u64 offset, u8 len)
+{
+	u64 val;
+
+	switch (len) {
+	case 1:
+		val = (u64) *((u8 *) data);
+		break;
+	case 2:
+		val = (u64) *((u16 *) data);
+		break;
+	case 4:
+		val = (u64) *((u32 *) data);
+		break;
+	case 8:
+		val = (u64) *((u64 *) data);
+		break;
+	default:
+		val = 0;		/* let FW report error */
+		break;
+	}
+	return pcistg_instr(val, req, offset);
+}
+
+static inline int zpci_read_single(u64 req, u64 *dst, u64 offset, u8 len)
+{
+	u64 data;
+	u8 cc;
+
+	cc = pcilg_instr(&data,	 req, offset);
+	switch (len) {
+	case 1:
+		*((u8 *) dst) = (u8) data;
+		break;
+	case 2:
+		*((u16 *) dst) = (u16) data;
+		break;
+	case 4:
+		*((u32 *) dst) = (u32) data;
+		break;
+	case 8:
+		*((u64 *) dst) = (u64) data;
+		break;
+	}
+	return cc;
+}
+
+static inline int zpci_write_block(u64 req, const u64 *data, u64 offset)
+{
+	return pcistb_instr(data, req, offset);
+}
+
+static inline u8 zpci_get_max_write_size(u64 src, u64 dst, int len, int max)
+{
+	int count = len > max ? max : len, size = 1;
+
+	while (!(src & 0x1) && !(dst & 0x1) && ((size << 1) <= count)) {
+		dst = dst >> 1;
+		src = src >> 1;
+		size = size << 1;
+	}
+	return size;
+}
+
+static inline int zpci_memcpy_fromio(void *dst,
+				     const volatile void __iomem *src,
+				     unsigned long n)
+{
+	struct zpci_iomap_entry *entry = &zpci_iomap_start[ZPCI_IDX(src)];
+	u64 req, offset = ZPCI_OFFSET(src);
+	int size, rc = 0;
+
+	while (n > 0) {
+		size = zpci_get_max_write_size((u64) src, (u64) dst, n, 8);
+		req = ZPCI_CREATE_REQ(entry->fh, entry->bar, size);
+		rc = zpci_read_single(req, dst, offset, size);
+		if (rc)
+			break;
+		offset += size;
+		dst += size;
+		n -= size;
+	}
+	return rc;
+}
+
+static inline int zpci_memcpy_toio(volatile void __iomem *dst,
+				   const void *src, unsigned long n)
+{
+	struct zpci_iomap_entry *entry = &zpci_iomap_start[ZPCI_IDX(dst)];
+	u64 req, offset = ZPCI_OFFSET(dst);
+	int size, rc = 0;
+
+	if (!src)
+		return -EINVAL;
+
+	while (n > 0) {
+		size = zpci_get_max_write_size((u64) dst, (u64) src, n, 128);
+		req = ZPCI_CREATE_REQ(entry->fh, entry->bar, size);
+
+		if (size > 8) /* main path */
+			rc = zpci_write_block(req, src, offset);
+		else
+			rc = zpci_write_single(req, src, offset, size);
+		if (rc)
+			break;
+		offset += size;
+		src += size;
+		n -= size;
+	}
+	return rc;
+}
+
+static inline int zpci_memset_io(volatile void __iomem *dst,
+				 unsigned char val, size_t count)
+{
+	u8 *src = kmalloc(count, GFP_KERNEL);
+	int rc;
+
+	if (src == NULL)
+		return -ENOMEM;
+	memset(src, val, count);
+
+	rc = zpci_memcpy_toio(dst, src, count);
+	kfree(src);
+	return rc;
+}
+
+#endif /* CONFIG_PCI */
+
+#endif /* _ASM_S390_PCI_IO_H */