[S390] move include/asm-s390 to arch/s390/include/asm

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

1 files changed, 363 insertions, 0 deletions

diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
new file mode 100644
index 0000000..0235970
--- /dev/null
+++ b/arch/s390/include/asm/uaccess.h
@@ -0,0 +1,363 @@
+/*
+ *  include/asm-s390/uaccess.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/uaccess.h"
+ */
+#ifndef __S390_UACCESS_H
+#define __S390_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/errno.h>
+
+#define VERIFY_READ     0
+#define VERIFY_WRITE    1
+
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(a)  ((mm_segment_t) { (a) })
+
+
+#define KERNEL_DS       MAKE_MM_SEG(0)
+#define USER_DS         MAKE_MM_SEG(1)
+
+#define get_ds()        (KERNEL_DS)
+#define get_fs()        (current->thread.mm_segment)
+
+#define set_fs(x) \
+({									\
+	unsigned long __pto;						\
+	current->thread.mm_segment = (x);				\
+	__pto = current->thread.mm_segment.ar4 ?			\
+		S390_lowcore.user_asce : S390_lowcore.kernel_asce;	\
+	__ctl_load(__pto, 7, 7);					\
+})
+
+#define segment_eq(a,b) ((a).ar4 == (b).ar4)
+
+
+static inline int __access_ok(const void __user *addr, unsigned long size)
+{
+	return 1;
+}
+#define access_ok(type,addr,size) __access_ok(addr,size)
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+struct uaccess_ops {
+	size_t (*copy_from_user)(size_t, const void __user *, void *);
+	size_t (*copy_from_user_small)(size_t, const void __user *, void *);
+	size_t (*copy_to_user)(size_t, void __user *, const void *);
+	size_t (*copy_to_user_small)(size_t, void __user *, const void *);
+	size_t (*copy_in_user)(size_t, void __user *, const void __user *);
+	size_t (*clear_user)(size_t, void __user *);
+	size_t (*strnlen_user)(size_t, const char __user *);
+	size_t (*strncpy_from_user)(size_t, const char __user *, char *);
+	int (*futex_atomic_op)(int op, int __user *, int oparg, int *old);
+	int (*futex_atomic_cmpxchg)(int __user *, int old, int new);
+};
+
+extern struct uaccess_ops uaccess;
+extern struct uaccess_ops uaccess_std;
+extern struct uaccess_ops uaccess_mvcos;
+extern struct uaccess_ops uaccess_mvcos_switch;
+extern struct uaccess_ops uaccess_pt;
+
+static inline int __put_user_fn(size_t size, void __user *ptr, void *x)
+{
+	size = uaccess.copy_to_user_small(size, ptr, x);
+	return size ? -EFAULT : size;
+}
+
+static inline int __get_user_fn(size_t size, const void __user *ptr, void *x)
+{
+	size = uaccess.copy_from_user_small(size, ptr, x);
+	return size ? -EFAULT : size;
+}
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+#define __put_user(x, ptr) \
+({								\
+	__typeof__(*(ptr)) __x = (x);				\
+	int __pu_err = -EFAULT;					\
+        __chk_user_ptr(ptr);                                    \
+	switch (sizeof (*(ptr))) {				\
+	case 1:							\
+	case 2:							\
+	case 4:							\
+	case 8:							\
+		__pu_err = __put_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		break;						\
+	default:						\
+		__put_user_bad();				\
+		break;						\
+	 }							\
+	__pu_err;						\
+})
+
+#define put_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	__put_user(x, ptr);					\
+})
+
+
+extern int __put_user_bad(void) __attribute__((noreturn));
+
+#define __get_user(x, ptr)					\
+({								\
+	int __gu_err = -EFAULT;					\
+	__chk_user_ptr(ptr);					\
+	switch (sizeof(*(ptr))) {				\
+	case 1: {						\
+		unsigned char __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 2: {						\
+		unsigned short __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 4: {						\
+		unsigned int __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 8: {						\
+		unsigned long long __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	default:						\
+		__get_user_bad();				\
+		break;						\
+	}							\
+	__gu_err;						\
+})
+
+#define get_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	__get_user(x, ptr);					\
+})
+
+extern int __get_user_bad(void) __attribute__((noreturn));
+
+#define __put_user_unaligned __put_user
+#define __get_user_unaligned __get_user
+
+/**
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+static inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 256))
+		return uaccess.copy_to_user_small(n, to, from);
+	else
+		return uaccess.copy_to_user(n, to, from);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/**
+ * copy_to_user: - Copy a block of data into user space.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+static inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __copy_to_user(to, from, n);
+	return n;
+}
+
+/**
+ * __copy_from_user: - Copy a block of data from user space, with less checking.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+static inline unsigned long __must_check
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 256))
+		return uaccess.copy_from_user_small(n, from, to);
+	else
+		return uaccess.copy_from_user(n, from, to);
+}
+
+/**
+ * copy_from_user: - Copy a block of data from user space.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+static inline unsigned long __must_check
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_READ, from, n))
+		n = __copy_from_user(to, from, n);
+	else
+		memset(to, 0, n);
+	return n;
+}
+
+static inline unsigned long __must_check
+__copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+	return uaccess.copy_in_user(n, to, from);
+}
+
+static inline unsigned long __must_check
+copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (__access_ok(from,n) && __access_ok(to,n))
+		n = __copy_in_user(to, from, n);
+	return n;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+static inline long __must_check
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+        long res = -EFAULT;
+        might_sleep();
+        if (access_ok(VERIFY_READ, src, 1))
+		res = uaccess.strncpy_from_user(count, src, dst);
+        return res;
+}
+
+static inline unsigned long
+strnlen_user(const char __user * src, unsigned long n)
+{
+	might_sleep();
+	return uaccess.strnlen_user(n, src);
+}
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str) strnlen_user(str, ~0UL)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long __must_check
+__clear_user(void __user *to, unsigned long n)
+{
+	return uaccess.clear_user(n, to);
+}
+
+static inline unsigned long __must_check
+clear_user(void __user *to, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = uaccess.clear_user(n, to);
+	return n;
+}
+
+#endif /* __S390_UACCESS_H */