[PATCH] powerpc: merge the rest of arch/ppc*/oprofile

- merge common.c
- move model specific files
- remove stub Makefiles
- clean up arch/ppc*/Makefile

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

4 files changed, 1 insertions, 345 deletions

diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index 16e2675..90c7502 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -71,7 +71,7 @@ drivers-$(CONFIG_8xx)		+= arch/ppc/8xx_io/
 drivers-$(CONFIG_4xx)		+= arch/ppc/4xx_io/
 drivers-$(CONFIG_CPM2)		+= arch/ppc/8260_io/
 
-drivers-$(CONFIG_OPROFILE)	+= arch/ppc/oprofile/
+drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 
 BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
 
diff --git a/arch/ppc/oprofile/Makefile b/arch/ppc/oprofile/Makefile
deleted file mode 100644
index 4bf75b7..0000000
--- a/arch/ppc/oprofile/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-include arch/powerpc/oprofile/Makefile
diff --git a/arch/ppc/oprofile/common.c b/arch/ppc/oprofile/common.c
deleted file mode 100644
index f63bee2..0000000
--- a/arch/ppc/oprofile/common.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * PPC 32 oprofile support
- * Based on PPC64 oprofile support
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Copyright (C) Freescale Semiconductor, Inc 2004
- *
- * Author: Andy Fleming
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/perfmon.h>
-#include <asm/cputable.h>
-#include <asm/oprofile_impl.h>
-
-static struct op_powerpc_model *model;
-
-static struct op_counter_config ctr[OP_MAX_COUNTER];
-static struct op_system_config sys;
-
-static void op_handle_interrupt(struct pt_regs *regs)
-{
-	model->handle_interrupt(regs, ctr);
-}
-
-static int op_ppc32_setup(void)
-{
-	/* Install our interrupt handler into the existing hook.  */
-	if(request_perfmon_irq(&op_handle_interrupt))
-		return -EBUSY;
-
-	mb();
-
-	/* Pre-compute the values to stuff in the hardware registers.  */
-	model->reg_setup(ctr, &sys, model->num_counters);
-
-#if 0
-	/* FIXME: Make multi-cpu work */
-	/* Configure the registers on all cpus.  */
-	on_each_cpu(model->reg_setup, NULL, 0, 1);
-#endif
-
-	return 0;
-}
-
-static void op_ppc32_shutdown(void)
-{
-	mb();
-
-	/* Remove our interrupt handler. We may be removing this module. */
-	free_perfmon_irq();
-}
-
-static void op_ppc32_cpu_start(void *dummy)
-{
-	model->start(ctr);
-}
-
-static int op_ppc32_start(void)
-{
-	on_each_cpu(op_ppc32_cpu_start, NULL, 0, 1);
-	return 0;
-}
-
-static inline void op_ppc32_cpu_stop(void *dummy)
-{
-	model->stop();
-}
-
-static void op_ppc32_stop(void)
-{
-	on_each_cpu(op_ppc32_cpu_stop, NULL, 0, 1);
-}
-
-static int op_ppc32_create_files(struct super_block *sb, struct dentry *root)
-{
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		struct dentry *dir;
-		char buf[3];
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(sb, root, buf);
-
-		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
-		oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
-		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
-
-		/* FIXME: Not sure if this is used */
-		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
-	}
-
-	oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
-	oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
-
-	/* Default to tracing both kernel and user */
-	sys.enable_kernel = 1;
-	sys.enable_user = 1;
-
-	return 0;
-}
-
-static struct oprofile_operations oprof_ppc32_ops = {
-	.create_files	= op_ppc32_create_files,
-	.setup		= op_ppc32_setup,
-	.shutdown	= op_ppc32_shutdown,
-	.start		= op_ppc32_start,
-	.stop		= op_ppc32_stop,
-	.cpu_type	= NULL		/* To be filled in below. */
-};
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	char *name;
-	int cpu_id = smp_processor_id();
-
-#ifdef CONFIG_FSL_BOOKE
-	model = &op_model_fsl_booke;
-#else
-	return -ENODEV;
-#endif
-
-	name = kmalloc(32, GFP_KERNEL);
-
-	if (NULL == name)
-		return -ENOMEM;
-
-	sprintf(name, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name);
-
-	oprof_ppc32_ops.cpu_type = name;
-
-	model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs;
-
-	*ops = oprof_ppc32_ops;
-
-	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
-	       oprof_ppc32_ops.cpu_type);
-
-	return 0;
-}
-
-void oprofile_arch_exit(void)
-{
-	kfree(oprof_ppc32_ops.cpu_type);
-	oprof_ppc32_ops.cpu_type = NULL;
-}
diff --git a/arch/ppc/oprofile/op_model_fsl_booke.c b/arch/ppc/oprofile/op_model_fsl_booke.c
deleted file mode 100644
index 1917f8d..0000000
--- a/arch/ppc/oprofile/op_model_fsl_booke.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * oprofile/op_model_e500.c
- *
- * Freescale Book-E oprofile support, based on ppc64 oprofile support
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Copyright (c) 2004 Freescale Semiconductor, Inc
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala <Kumar.Gala@freescale.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/reg_booke.h>
-#include <asm/page.h>
-#include <asm/perfmon.h>
-#include <asm/oprofile_impl.h>
-
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-static int num_counters;
-static int oprofile_running;
-
-static inline unsigned int ctr_read(unsigned int i)
-{
-	switch(i) {
-		case 0:
-			return mfpmr(PMRN_PMC0);
-		case 1:
-			return mfpmr(PMRN_PMC1);
-		case 2:
-			return mfpmr(PMRN_PMC2);
-		case 3:
-			return mfpmr(PMRN_PMC3);
-		default:
-			return 0;
-	}
-}
-
-static inline void ctr_write(unsigned int i, unsigned int val)
-{
-	switch(i) {
-		case 0:
-			mtpmr(PMRN_PMC0, val);
-			break;
-		case 1:
-			mtpmr(PMRN_PMC1, val);
-			break;
-		case 2:
-			mtpmr(PMRN_PMC2, val);
-			break;
-		case 3:
-			mtpmr(PMRN_PMC3, val);
-			break;
-		default:
-			break;
-	}
-}
-
-
-static void fsl_booke_reg_setup(struct op_counter_config *ctr,
-			     struct op_system_config *sys,
-			     int num_ctrs)
-{
-	int i;
-
-	num_counters = num_ctrs;
-
-	/* freeze all counters */
-	pmc_stop_ctrs();
-
-	/* Our counters count up, and "count" refers to
-	 * how much before the next interrupt, and we interrupt
-	 * on overflow.  So we calculate the starting value
-	 * which will give us "count" until overflow.
-	 * Then we set the events on the enabled counters */
-	for (i = 0; i < num_counters; ++i) {
-		reset_value[i] = 0x80000000UL - ctr[i].count;
-
-		init_pmc_stop(i);
-
-		set_pmc_event(i, ctr[i].event);
-
-		set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel);
-	}
-}
-
-static void fsl_booke_start(struct op_counter_config *ctr)
-{
-	int i;
-
-	mtmsr(mfmsr() | MSR_PMM);
-
-	for (i = 0; i < num_counters; ++i) {
-		if (ctr[i].enabled) {
-			ctr_write(i, reset_value[i]);
-			/* Set Each enabled counterd to only
-			 * count when the Mark bit is not set */
-			set_pmc_marked(i, 1, 0);
-			pmc_start_ctr(i, 1);
-		} else {
-			ctr_write(i, 0);
-
-			/* Set the ctr to be stopped */
-			pmc_start_ctr(i, 0);
-		}
-	}
-
-	/* Clear the freeze bit, and enable the interrupt.
-	 * The counters won't actually start until the rfi clears
-	 * the PMM bit */
-	pmc_start_ctrs(1);
-
-	oprofile_running = 1;
-
-	pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(),
-			mfpmr(PMRN_PMGC0));
-}
-
-static void fsl_booke_stop(void)
-{
-	/* freeze counters */
-	pmc_stop_ctrs();
-
-	oprofile_running = 0;
-
-	pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(),
-			mfpmr(PMRN_PMGC0));
-
-	mb();
-}
-
-
-static void fsl_booke_handle_interrupt(struct pt_regs *regs,
-				    struct op_counter_config *ctr)
-{
-	unsigned long pc;
-	int is_kernel;
-	int val;
-	int i;
-
-	/* set the PMM bit (see comment below) */
-	mtmsr(mfmsr() | MSR_PMM);
-
-	pc = regs->nip;
-	is_kernel = (pc >= KERNELBASE);
-
-	for (i = 0; i < num_counters; ++i) {
-		val = ctr_read(i);
-		if (val < 0) {
-			if (oprofile_running && ctr[i].enabled) {
-				oprofile_add_pc(pc, is_kernel, i);
-				ctr_write(i, reset_value[i]);
-			} else {
-				ctr_write(i, 0);
-			}
-		}
-	}
-
-	/* The freeze bit was set by the interrupt. */
-	/* Clear the freeze bit, and reenable the interrupt.
-	 * The counters won't actually start until the rfi clears
-	 * the PMM bit */
-	pmc_start_ctrs(1);
-}
-
-struct op_powerpc_model op_model_fsl_booke = {
-	.reg_setup		= fsl_booke_reg_setup,
-	.start			= fsl_booke_start,
-	.stop			= fsl_booke_stop,
-	.handle_interrupt	= fsl_booke_handle_interrupt,
-};