summaryrefslogtreecommitdiffstats
path: root/arch/ppc
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2005-06-27 14:36:32 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-06-27 15:11:42 -0700
commite4ee69c8c1e7ff9790fbce29c7be50db57323a6f (patch)
treeba6bfdc216de500f3b3c7c1613c50efb7d550dba /arch/ppc
parentbb1657468152c5e5232c7bf35cf0e9c41b5d9910 (diff)
downloadop-kernel-dev-e4ee69c8c1e7ff9790fbce29c7be50db57323a6f.zip
op-kernel-dev-e4ee69c8c1e7ff9790fbce29c7be50db57323a6f.tar.gz
[PATCH] ppc32: Bump PMU interrupt priority
The Power Management Unit on PowerMacs is very sensitive to timeouts during async message exchanges. It uses rather crude protocol based on a shift register with an interrupt and is almost continuously exchanging messages with the host CPU on laptops. This patch adds a routine to the open_pic driver to be able to select a PMU driver so that it bumps it's interrupt priority to above the normal level. This will allow PMU interrupts to occur while another interrupt is pending, and thus reduce the risk of machine beeing abruptly shutdown by the PMU due to a timeout in PMU communication caused by excessive interrupt latency. The problem is very rare, and usually just doesn't happen, but it is still useful to make things even more robust. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'arch/ppc')
-rw-r--r--arch/ppc/syslib/open_pic.c26
1 files changed, 19 insertions, 7 deletions
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index b45d826..ad39b86 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -370,8 +370,9 @@ void __init openpic_init(int offset)
/* Initialize IPI interrupts */
if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
for (i = 0; i < OPENPIC_NUM_IPI; i++) {
- /* Disabled, Priority 10..13 */
- openpic_initipi(i, 10+i, OPENPIC_VEC_IPI+i+offset);
+ /* Disabled, increased priorities 10..13 */
+ openpic_initipi(i, OPENPIC_PRIORITY_IPI_BASE+i,
+ OPENPIC_VEC_IPI+i+offset);
/* IPIs are per-CPU */
irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
irq_desc[OPENPIC_VEC_IPI+i+offset].handler = &open_pic_ipi;
@@ -399,8 +400,9 @@ void __init openpic_init(int offset)
if (sense & IRQ_SENSE_MASK)
irq_desc[i+offset].status = IRQ_LEVEL;
- /* Enabled, Priority 8 */
- openpic_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK),
+ /* Enabled, Default priority */
+ openpic_initirq(i, OPENPIC_PRIORITY_DEFAULT, i+offset,
+ (sense & IRQ_POLARITY_MASK),
(sense & IRQ_SENSE_MASK));
/* Processor 0 */
openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE);
@@ -656,6 +658,18 @@ static void __init openpic_maptimer(u_int timer, cpumask_t cpumask)
}
/*
+ * Change the priority of an interrupt
+ */
+void __init
+openpic_set_irq_priority(u_int irq, u_int pri)
+{
+ check_arg_irq(irq);
+ openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
+ OPENPIC_PRIORITY_MASK,
+ pri << OPENPIC_PRIORITY_SHIFT);
+}
+
+/*
* Initalize the interrupt source which will generate an NMI.
* This raises the interrupt's priority from 8 to 9.
*
@@ -665,9 +679,7 @@ void __init
openpic_init_nmi_irq(u_int irq)
{
check_arg_irq(irq);
- openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
- OPENPIC_PRIORITY_MASK,
- 9 << OPENPIC_PRIORITY_SHIFT);
+ openpic_set_irq_priority(irq, OPENPIC_PRIORITY_NMI);
}
/*
OpenPOWER on IntegriCloud