Merge branch 'master'

113 files changed, 202 insertions, 16685 deletions

diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c
index 49eb2a7..a892356 100644
--- a/arch/ppc/8xx_io/cs4218_tdm.c
+++ b/arch/ppc/8xx_io/cs4218_tdm.c
@@ -126,11 +126,11 @@ static int numReadBufs = 4, readbufSize = 32;
 */
 static volatile cbd_t	*rx_base, *rx_cur, *tx_base, *tx_cur;
 
-MODULE_PARM(catchRadius, "i");
-MODULE_PARM(numBufs, "i");
-MODULE_PARM(bufSize, "i");
-MODULE_PARM(numreadBufs, "i");
-MODULE_PARM(readbufSize, "i");
+module_param(catchRadius, int, 0);
+module_param(numBufs, int, 0);
+module_param(bufSize, int, 0);
+module_param(numreadBufs, int, 0);
+module_param(readbufSize, int, 0);
 
 #define arraysize(x)	(sizeof(x)/sizeof(*(x)))
 #define le2be16(x)	(((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff))
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 54a0a9b..e9a8f5d 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -19,6 +19,10 @@ config RWSEM_XCHGADD_ALGORITHM
 	bool
 	default y
 
+config GENERIC_HWEIGHT
+	bool
+	default y
+
 config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
@@ -57,15 +61,15 @@ config 6xx
 	select PPC_FPU
 	help
 	  There are four types of PowerPC chips supported.  The more common
-	  types (601, 603, 604, 740, 750, 7400), the Motorola embedded
-	  versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM
-	  embedded versions (403 and 405) and the POWER3 processor.
-	  (For support for more recent 64-bit processors, set ARCH=powerpc.)
+	  types (601, 603, 604, 740, 750, 7400), the older Freescale
+	  (formerly Motorola) embedded versions (821, 823, 850, 855, 860,
+	  52xx, 82xx, 83xx), the IBM embedded versions (403 and 405) and
+	  the Book E embedded processors from IBM (44x) and Freescale (85xx).
+	  For support for 64-bit processors, set ARCH=powerpc.
 	  Unless you are building a kernel for one of the embedded processor
-	  systems or a POWER3-based IBM RS/6000, choose 6xx.
-	  Note that the kernel runs in 32-bit mode even on 64-bit chips.
-	  Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
-	  specific support for that chipset is asked later on.
+	  systems, choose 6xx.
+	  Also note that because the 52xx, 82xx, & 83xx family have a 603e
+	  core, specific support for that chipset is asked later on.
 
 config 40x
 	bool "40x"
@@ -73,10 +77,6 @@ config 40x
 config 44x
 	bool "44x"
 
-config POWER3
-	select PPC_FPU
-	bool "POWER3"
-
 config 8xx
 	bool "8xx"
 
@@ -248,14 +248,9 @@ config PPC601_SYNC_FIX
 source arch/ppc/platforms/4xx/Kconfig
 source arch/ppc/platforms/85xx/Kconfig
 
-config PPC64BRIDGE
-	bool
-	depends on POWER3
-	default y
-
 config PPC_STD_MMU
 	bool
-	depends on 6xx || POWER3
+	depends on 6xx
 	default y
 
 config NOT_COHERENT_CACHE
@@ -530,8 +525,8 @@ endmenu
 
 choice
 	prompt "Machine Type"
-	depends on 6xx || POWER3
-	default PPC_MULTIPLATFORM
+	depends on 6xx
+	default PPC_PREP
 	---help---
 	  Linux currently supports several different kinds of PowerPC-based
 	  machines: Apple Power Macintoshes and clones (such as the Motorola
@@ -541,15 +536,14 @@ choice
 	  Platform) machines (including all of the recent IBM RS/6000 and
 	  pSeries machines), and several embedded PowerPC systems containing
 	  4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors.  Currently, the
-	  default option is to build a kernel which works on PReP and CHRP.
+	  default option is to build a kernel which works on PReP.
 
-	  Note that support for Apple machines is now only available with
-	  ARCH=powerpc, and has been removed from this menu.  If you wish
-	  to build a kernel for an Apple machine, exit this configuration
-	  process and re-run it with ARCH=powerpc.
+	  Note that support for Apple and CHRP machines is now only available
+	  with ARCH=powerpc, and has been removed from this menu.  If you
+	  wish to build a kernel for an Apple or CHRP machine, exit this
+	  configuration process and re-run it with ARCH=powerpc.
 
-	  Select CHRP/PReP if configuring for an IBM RS/6000 or
-	  pSeries machine, or a PReP machine.
+	  Select PReP if configuring for a PReP machine.
 
 	  Select Gemini if configuring for a Synergy Microsystems' Gemini
 	  series Single Board Computer.  More information is available at:
@@ -558,8 +552,8 @@ choice
 	  Select APUS if configuring for a PowerUP Amiga.  More information is
 	  available at: <http://linux-apus.sourceforge.net/>.
 
-config PPC_MULTIPLATFORM
-	bool "CHRP/PReP"
+config PPC_PREP
+	bool "PReP"
 
 config APUS
 	bool "Amiga-APUS"
@@ -711,6 +705,13 @@ config LITE5200
 	  much but it's only been tested on this board version. I think this
 	  board is also known as IceCube.
 
+config LITE5200B
+	bool "Freescale LITE5200B"
+	depends LITE5200
+	help
+	  Support for the LITE5200B dev board for the MPC5200 from Freescale.
+	  This is the new board with 2 PCI slots.
+
 config MPC834x_SYS
 	bool "Freescale MPC834x SYS"
 	help
@@ -796,25 +797,6 @@ config CPM2
 	  you wish to build a kernel for a machine with a CPM2 coprocessor
 	  on it (826x, 827x, 8560).
 
-config PPC_CHRP
-	bool "Support for CHRP (Common Hardware Reference Platform) machines"
-	depends on PPC_MULTIPLATFORM
-	select PPC_I8259
-	select PPC_INDIRECT_PCI
-	default y
-
-config PPC_PREP
-	bool "Support for PReP (PowerPC Reference Platform) machines"
-	depends on PPC_MULTIPLATFORM
-	select PPC_I8259
-	select PPC_INDIRECT_PCI
-	default y
-
-config PPC_OF
-	bool
-	depends on PPC_CHRP
-	default y
-
 config PPC_GEN550
 	bool
 	depends on SANDPOINT || SPRUCE || PPLUS || \
@@ -973,14 +955,6 @@ source "mm/Kconfig"
 
 source "fs/Kconfig.binfmt"
 
-config PROC_DEVICETREE
-	bool "Support for Open Firmware device tree in /proc"
-	depends on PPC_OF && PROC_FS
-	help
-	  This option adds a device-tree directory under /proc which contains
-	  an image of the device tree that the kernel copies from Open
-	  Firmware. If unsure, say Y here.
-
 config PREP_RESIDUAL
 	bool "Support for PReP Residual Data"
 	depends on PPC_PREP
@@ -1173,8 +1147,7 @@ menu "Bus options"
 
 config ISA
 	bool "Support for ISA-bus hardware"
-	depends on PPC_PREP || PPC_CHRP
-	select PPC_I8259
+	depends on PPC_PREP
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -1184,18 +1157,18 @@ config ISA
 
 config GENERIC_ISA_DMA
 	bool
-	depends on POWER3 || 6xx && !CPM2
+	depends on 6xx && !CPM2
 	default y
 
 config PPC_I8259
 	bool
-	default y if 85xx
+	default y if 85xx || PPC_PREP
 	default n
 
 config PPC_INDIRECT_PCI
 	bool
 	depends on PCI
-	default y if 40x || 44x || 85xx || 83xx
+	default y if 40x || 44x || 85xx || 83xx || PPC_PREP
 	default n
 
 config EISA
@@ -1386,7 +1359,7 @@ config CONSISTENT_SIZE
 
 config BOOT_LOAD_BOOL
 	bool "Set the boot link/load address"
-	depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
+	depends on ADVANCED_OPTIONS && !PPC_PREP
 	help
 	  This option allows you to set the initial load address of the zImage
 	  or zImage.initrd file.  This can be useful if you are on a board
diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug
index 8cc75ab..f94b877 100644
--- a/arch/ppc/Kconfig.debug
+++ b/arch/ppc/Kconfig.debug
@@ -53,13 +53,6 @@ config BDI_SWITCH
 	  Unless you are intending to debug the kernel with one of these
 	  machines, say N here.
 
-config BOOTX_TEXT
-	bool "Support for early boot text console (BootX or OpenFirmware only)"
-	depends PPC_OF
-	help
-	  Say Y here to see progress messages from the boot firmware in text
-	  mode. Requires either BootX or Open Firmware.
-
 config SERIAL_TEXT_DEBUG
 	bool "Support for early boot texts over serial port"
 	depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index 98e940b..0db66dc 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -40,10 +40,8 @@ ifndef CONFIG_FSL_BOOKE
 CFLAGS		+= -mstring
 endif
 
-cpu-as-$(CONFIG_PPC64BRIDGE)	+= -Wa,-mppc64bridge
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
-cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
 cpu-as-$(CONFIG_E500)		+= -Wa,-me500
 cpu-as-$(CONFIG_E200)		+= -Wa,-me200
 
@@ -59,8 +57,6 @@ head-$(CONFIG_4xx)		:= arch/ppc/kernel/head_4xx.o
 head-$(CONFIG_44x)		:= arch/ppc/kernel/head_44x.o
 head-$(CONFIG_FSL_BOOKE)	:= arch/ppc/kernel/head_fsl_booke.o
 
-head-$(CONFIG_6xx)		+= arch/ppc/kernel/idle_6xx.o
-head-$(CONFIG_POWER4)		+= arch/ppc/kernel/idle_power4.o
 head-$(CONFIG_PPC_FPU)		+= arch/powerpc/kernel/fpu.o
 
 core-y				+= arch/ppc/kernel/ arch/powerpc/kernel/ \
@@ -71,7 +67,7 @@ core-y				+= arch/ppc/kernel/ arch/powerpc/kernel/ \
 core-$(CONFIG_4xx)		+= arch/ppc/platforms/4xx/
 core-$(CONFIG_83xx)		+= arch/ppc/platforms/83xx/
 core-$(CONFIG_85xx)		+= arch/ppc/platforms/85xx/
-core-$(CONFIG_MATH_EMULATION)	+= arch/ppc/math-emu/
+core-$(CONFIG_MATH_EMULATION)	+= arch/powerpc/math-emu/
 core-$(CONFIG_XMON)		+= arch/ppc/xmon/
 core-$(CONFIG_APUS)		+= arch/ppc/amiga/
 drivers-$(CONFIG_8xx)		+= arch/ppc/8xx_io/
@@ -82,7 +78,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 
 BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
 
-.PHONY: $(BOOT_TARGETS)
+PHONY += $(BOOT_TARGETS)
 
 all: uImage zImage
 
diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile
index f565699..b739e25 100644
--- a/arch/ppc/boot/Makefile
+++ b/arch/ppc/boot/Makefile
@@ -1,3 +1,9 @@
+#
+# arch/ppc/boot/Makefile
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -13,16 +19,15 @@ HOSTCFLAGS	+= -Iarch/$(ARCH)/boot/include
 BOOT_TARGETS	= zImage zImage.initrd znetboot znetboot.initrd
 
 bootdir-y			:= simple
-bootdir-$(CONFIG_PPC_OF)	+= openfirmware
 subdir-y			:= lib common images
-subdir-$(CONFIG_PPC_MULTIPLATFORM)	+= of1275
+subdir-$(CONFIG_PPC_PREP)	+= of1275
 
 # for cleaning
-subdir-				+= simple openfirmware
+subdir-				+= simple
 
-hostprogs-y := $(addprefix utils/, addnote mknote hack-coff mkprep mkbugboot mktree)
+hostprogs-y := $(addprefix utils/, mkprep mkbugboot mktree)
 
-.PHONY: $(BOOT_TARGETS) $(bootdir-y)
+PHONY += $(BOOT_TARGETS) $(bootdir-y)
 
 $(BOOT_TARGETS): $(bootdir-y)
 
diff --git a/arch/ppc/boot/openfirmware/Makefile b/arch/ppc/boot/openfirmware/Makefile
deleted file mode 100644
index 2a411ec..0000000
--- a/arch/ppc/boot/openfirmware/Makefile
+++ /dev/null
@@ -1,106 +0,0 @@
-# Makefile for making bootable images on various OpenFirmware machines.
-#
-# Paul Mackerras	January 1997
-#	XCOFF bootable images for PowerMacs
-# Geert Uytterhoeven	September 1997
-#	ELF bootable iamges for CHRP machines.
-# Tom Rini		January 2001
-# 	Cleaned up, moved into arch/ppc/boot/pmac
-# Tom Rini		July/August 2002
-#	Merged 'chrp' and 'pmac' into 'openfirmware', and cleaned up the
-#	rules.
-
-zImage.initrd znetboot.initrd: del-ramdisk-sec	:= -R .ramdisk
-zImage.initrd znetboot.initrd: initrd		:= .initrd
-
-
-boot	:= arch/ppc/boot
-common	:= $(boot)/common
-utils	:= $(boot)/utils
-bootlib	:= $(boot)/lib
-of1275	:= $(boot)/of1275
-images	:= $(boot)/images
-
-CHRP_LD_ARGS	:= -T $(srctree)/$(boot)/ld.script -e _start -Ttext 0x00800000
-
-COMMONOBJS	:= start.o misc.o common.o
-CHRPOBJS	:= crt0.o     $(COMMONOBJS) chrpmain.o
-
-targets 	:= $(CHRPOBJS) dummy.o
-CHRPOBJS	:= $(addprefix $(obj)/, $(CHRPOBJS))
-
-LIBS		:= lib/lib.a $(bootlib)/lib.a $(of1275)/lib.a $(common)/lib.a
-
-ifdef CONFIG_SMP
-END := .smp
-endif
-ifdef CONFIG_PPC64BRIDGE
-END += .64
-endif
-
-
-$(images)/ramdisk.image.gz:
-	@echo '  MISSING $@'
-	@echo '          RAM disk image must be provided separately'
-	@/bin/false
-
-quiet_cmd_genimage = GEN     $@
-      cmd_genimage = $(OBJCOPY) -R .comment       \
-	--add-section=.image=$(images)/vmlinux.gz \
-	--set-section-flags=.image=contents,alloc,load,readonly,data $< $@
-
-targets += image.o
-$(obj)/image.o: $(obj)/dummy.o $(images)/vmlinux.gz FORCE
-	$(call if_changed,genimage)
-
-# Place the ramdisk in the initrd image.
-quiet_cmd_genimage-initrd = GEN     $@
-      cmd_genimage-initrd = $(OBJCOPY) $< $@ \
-	--add-section=.ramdisk=$(images)/ramdisk.image.gz \
-	--set-section-flags=.ramdisk=contents,alloc,load,readonly,data
-targets += image.initrd.o
-$(obj)/image.initrd.o: $(obj)/image.o $(images)/ramdisk.image.gz FORCE
-	$(call if_changed,genimage-initrd)
-
-
-targets += crt0.o
-$(obj)/crt0.o: $(common)/crt0.S FORCE
-	$(call if_changed_dep,as_o_S)
-
-quiet_cmd_gen-chrp = CHRP    $@
-      cmd_gen-chrp = $(LD) $(CHRP_LD_ARGS) -o $@ $(CHRPOBJS) $< $(LIBS) && \
-			$(OBJCOPY) $@ $@ -R .comment $(del-ramdisk-sec)
-
-$(images)/zImage.chrp: $(obj)/image.o $(CHRPOBJS) $(LIBS) \
-				   $(srctree)/$(boot)/ld.script
-	$(call cmd,gen-chrp)
-$(images)/zImage.initrd.chrp: $(obj)/image.initrd.o $(CHRPOBJS) $(LIBS) \
-				   $(srctree)/$(boot)/ld.script
-	$(call cmd,gen-chrp)
-
-quiet_cmd_addnote = ADDNOTE $@
-      cmd_addnote = cat $< > $@ && $(utils)/addnote $@
-$(images)/zImage.chrp-rs6k $(images)/zImage.initrd.chrp-rs6k: \
-	%-rs6k: %
-	$(call cmd,addnote)
-
-# The targets used on the make command-line
-
-.PHONY: zImage zImage.initrd
-zImage:		 $(images)/zImage.chrp		\
-		 $(images)/zImage.chrp-rs6k
-	@echo '  kernel: $@ is ready ($<)'
-zImage.initrd:	 $(images)/zImage.initrd.chrp		\
-		 $(images)/zImage.initrd.chrp-rs6k
-	@echo '  kernel: $@ is ready ($<)'
-
-TFTPIMAGE	:= /tftpboot/zImage
-
-.PHONY: znetboot znetboot.initrd
-znetboot:	$(images)/zImage.chrp
-	cp $(images)/zImage.chrp      $(TFTPIMAGE).chrp$(END)
-	@echo '  kernel: $@ is ready ($<)'
-znetboot.initrd:$(images)/zImage.initrd.chrp
-	cp $(images)/zImage.initrd.chrp      $(TFTPIMAGE).chrp$(END)
-	@echo '  kernel: $@ is ready ($<)'
-
diff --git a/arch/ppc/boot/openfirmware/chrpmain.c b/arch/ppc/boot/openfirmware/chrpmain.c
deleted file mode 100644
index 245dbd9..0000000
--- a/arch/ppc/boot/openfirmware/chrpmain.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/string.h>
-#include "nonstdio.h"
-#include "of1275.h"
-#include <asm/processor.h>
-#include <asm/page.h>
-
-/* Passed from the linker */
-extern char __image_begin, __image_end;
-extern char __ramdisk_begin, __ramdisk_end;
-extern char _start, _end;
-
-extern unsigned int heap_max;
-extern void flush_cache(void *, unsigned long);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern void make_bi_recs(unsigned long addr, char *name, unsigned int mach,
-		unsigned int progend);
-
-char *avail_ram;
-char *begin_avail, *end_avail;
-char *avail_high;
-
-#define RAM_START	0x00000000
-#define RAM_END		(64<<20)
-
-#define BOOT_START	((unsigned long)_start)
-#define BOOT_END	((unsigned long)(_end + 0xFFF) & ~0xFFF)
-
-#define RAM_FREE	((unsigned long)(_end+0x1000)&~0xFFF)
-#define PROG_START	0x00010000
-#define PROG_SIZE	0x007f0000 /* 8MB */
-
-#define SCRATCH_SIZE	(128 << 10)
-
-static char scratch[SCRATCH_SIZE];	/* 128k of scratch space for gunzip */
-
-typedef void (*kernel_start_t)(int, int, void *, unsigned int, unsigned int);
-
-void
-boot(int a1, int a2, void *prom)
-{
-    unsigned sa, len;
-    void *dst;
-    unsigned char *im;
-    unsigned int initrd_size, initrd_start;
-
-    printf("chrpboot starting: loaded at 0x%p\n\r", &_start);
-
-    initrd_size = &__ramdisk_end - &__ramdisk_begin;
-    if (initrd_size) {
-	initrd_start = (RAM_END - initrd_size) & ~0xFFF;
-	a1 = initrd_start;
-	a2 = initrd_size;
-	claim(initrd_start, RAM_END - initrd_start, 0);
-	printf("initial ramdisk moving 0x%x <- 0x%p (%x bytes)\n\r",
-	       initrd_start, &__ramdisk_begin, initrd_size);
-	memcpy((char *)initrd_start, &__ramdisk_begin, initrd_size);
-    } else {
-	initrd_start = 0;
-	initrd_size = 0;
-	a2 = 0xdeadbeef;
-    }
-
-    im = &__image_begin;
-    len = &__image_end - &__image_begin;
-    /* claim 4MB starting at PROG_START */
-    claim(PROG_START, PROG_SIZE - PROG_START, 0);
-    dst = (void *) PROG_START;
-    if (im[0] == 0x1f && im[1] == 0x8b) {
-	avail_ram = scratch;
-	begin_avail = avail_high = avail_ram;
-	end_avail = scratch + sizeof(scratch);
-	printf("gunzipping (0x%p <- 0x%p:0x%p)...", dst, im, im+len);
-	gunzip(dst, PROG_SIZE - PROG_START, im, &len);
-	printf("done %u bytes\n\r", len);
-	printf("%u bytes of heap consumed, max in use %u\n\r",
-	       avail_high - begin_avail, heap_max);
-    } else {
-	memmove(dst, im, len);
-    }
-
-    flush_cache(dst, len);
-    make_bi_recs(((unsigned long) dst + len), "chrpboot", _MACH_chrp,
-		    (PROG_START + PROG_SIZE));
-
-    sa = PROG_START;
-    printf("start address = 0x%x\n\r", sa);
-
-    (*(kernel_start_t)sa)(a1, a2, prom, initrd_start, initrd_size);
-
-    printf("returned?\n\r");
-
-    pause();
-}
diff --git a/arch/ppc/boot/openfirmware/common.c b/arch/ppc/boot/openfirmware/common.c
deleted file mode 100644
index 0f46756..0000000
--- a/arch/ppc/boot/openfirmware/common.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "nonstdio.h"
-#include "of1275.h"
-#include <linux/string.h>
-#include <linux/zlib.h>
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-
-/* Information from the linker */
-
-extern int strcmp(const char *s1, const char *s2);
-extern char *avail_ram, *avail_high;
-extern char *end_avail;
-
-unsigned int heap_use, heap_max;
-
-struct memchunk {
-    unsigned int size;
-    struct memchunk *next;
-};
-
-static struct memchunk *freechunks;
-
-static void *zalloc(unsigned size)
-{
-    void *p;
-    struct memchunk **mpp, *mp;
-
-    size = (size + 7) & -8;
-    heap_use += size;
-    if (heap_use > heap_max)
-	heap_max = heap_use;
-    for (mpp = &freechunks; (mp = *mpp) != 0; mpp = &mp->next) {
-	if (mp->size == size) {
-	    *mpp = mp->next;
-	    return mp;
-	}
-    }
-    p = avail_ram;
-    avail_ram += size;
-    if (avail_ram > avail_high)
-	avail_high = avail_ram;
-    if (avail_ram > end_avail) {
-	printf("oops... out of memory\n\r");
-	pause();
-    }
-    return p;
-}
-
-#define HEAD_CRC	2
-#define EXTRA_FIELD	4
-#define ORIG_NAME	8
-#define COMMENT		0x10
-#define RESERVED	0xe0
-
-void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
-{
-	z_stream s;
-	int r, i, flags;
-
-	/* skip header */
-	i = 10;
-	flags = src[3];
-	if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
-		printf("bad gzipped data\n\r");
-		exit();
-	}
-	if ((flags & EXTRA_FIELD) != 0)
-		i = 12 + src[10] + (src[11] << 8);
-	if ((flags & ORIG_NAME) != 0)
-		while (src[i++] != 0)
-			;
-	if ((flags & COMMENT) != 0)
-		while (src[i++] != 0)
-			;
-	if ((flags & HEAD_CRC) != 0)
-		i += 2;
-	if (i >= *lenp) {
-		printf("gunzip: ran out of data in header\n\r");
-		exit();
-	}
-
-	/* Initialize ourself. */
-	s.workspace = zalloc(zlib_inflate_workspacesize());
-	r = zlib_inflateInit2(&s, -MAX_WBITS);
-	if (r != Z_OK) {
-		printf("zlib_inflateInit2 returned %d\n\r", r);
-		exit();
-	}
-	s.next_in = src + i;
-	s.avail_in = *lenp - i;
-	s.next_out = dst;
-	s.avail_out = dstlen;
-	r = zlib_inflate(&s, Z_FINISH);
-	if (r != Z_OK && r != Z_STREAM_END) {
-		printf("inflate returned %d msg: %s\n\r", r, s.msg);
-		exit();
-	}
-	*lenp = s.next_out - (unsigned char *) dst;
-	zlib_inflateEnd(&s);
-}
-
-/* Make a bi_rec in OF.  We need to be passed a name for BI_BOOTLOADER_ID,
- * a machine type for BI_MACHTYPE, and the location where the end of the
- * bootloader is (PROG_START + PROG_SIZE)
- */
-void make_bi_recs(unsigned long addr, char *name, unsigned int mach,
-		unsigned long progend)
-{
-	struct bi_record *rec;
-
-
-	/* leave a 1MB gap then align to the next 1MB boundary */
-	addr = _ALIGN(addr+ (1<<20) - 1, (1<<20));
-	/* oldworld machine seem very unhappy about this. -- Tom */
-	if (addr >= progend)
-		claim(addr, 0x1000, 0);
-
-	rec = (struct bi_record *)addr;
-	rec->tag = BI_FIRST;
-	rec->size = sizeof(struct bi_record);
-	rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-	rec->tag = BI_BOOTLOADER_ID;
-	sprintf( (char *)rec->data, name);
-	rec->size = sizeof(struct bi_record) + strlen(name) + 1;
-	rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-	rec->tag = BI_MACHTYPE;
-	rec->data[0] = mach;
-	rec->data[1] = 1;
-	rec->size = sizeof(struct bi_record) + 2 * sizeof(unsigned long);
-	rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-	rec->tag = BI_LAST;
-	rec->size = sizeof(struct bi_record);
-	rec = (struct bi_record *)((unsigned long)rec + rec->size);
-}
diff --git a/arch/ppc/boot/openfirmware/dummy.c b/arch/ppc/boot/openfirmware/dummy.c
deleted file mode 100644
index 31dbf45..0000000
--- a/arch/ppc/boot/openfirmware/dummy.c
+++ /dev/null
@@ -1,4 +0,0 @@
-int main(void)
-{
-	return 0;
-}
diff --git a/arch/ppc/boot/openfirmware/misc.S b/arch/ppc/boot/openfirmware/misc.S
deleted file mode 100644
index ab9e897..0000000
--- a/arch/ppc/boot/openfirmware/misc.S
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-	.text
-
-/*
- * Use the BAT2 & 3 registers to map the 1st 16MB of RAM to
- * the address given as the 1st argument.
- */
-	.globl	setup_bats
-setup_bats:
-	mfpvr	5
-	rlwinm	5,5,16,16,31		/* r3 = 1 for 601, 4 for 604 */
-	cmpwi	0,5,1
-	li	0,0
-	bne	4f
-	mtibatl	3,0			/* invalidate BAT first */
-	ori	3,3,4			/* set up BAT registers for 601 */
-	li	4,0x7f
-	mtibatu	2,3
-	mtibatl	2,4
-	oris	3,3,0x80
-	oris	4,4,0x80
-	mtibatu	3,3
-	mtibatl	3,4
-	b	5f
-4:	mtdbatu	3,0			/* invalidate BATs first */
-	mtibatu	3,0
-	ori	3,3,0xff		/* set up BAT registers for 604 */
-	li	4,2
-	mtdbatl	2,4
-	mtdbatu	2,3
-	mtibatl	2,4
-	mtibatu	2,3
-	oris	3,3,0x80
-	oris	4,4,0x80
-	mtdbatl	3,4
-	mtdbatu	3,3
-	mtibatl	3,4
-	mtibatu	3,3
-5:	sync
-	isync
-	blr
-
-/*
- * Flush the dcache and invalidate the icache for a range of addresses.
- *
- * flush_cache(addr, len)
- */
-	.global	flush_cache
-flush_cache:
-	addi	4,4,0x1f	/* len = (len + 0x1f) / 0x20 */
-	rlwinm.	4,4,27,5,31
-	mtctr	4
-	beqlr
-1:	dcbf	0,3
-	icbi	0,3
-	addi	3,3,0x20
-	bdnz	1b
-	sync
-	isync
-	blr
diff --git a/arch/ppc/boot/openfirmware/start.c b/arch/ppc/boot/openfirmware/start.c
deleted file mode 100644
index 1617a26..0000000
--- a/arch/ppc/boot/openfirmware/start.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <stdarg.h>
-#include "of1275.h"
-
-extern int strlen(const char *s);
-extern void boot(int a1, int a2, void *prom);
-
-phandle stdin;
-phandle stdout;
-phandle stderr;
-
-void printk(char *fmt, ...);
-
-void
-start(int a1, int a2, void *promptr)
-{
-    ofinit(promptr);
-    if (ofstdio(&stdin, &stdout, &stderr))
-	exit();
-
-    boot(a1, a2, promptr);
-    for (;;)
-	exit();
-}
-
-int writestring(void *f, char *ptr, int nb)
-{
-	int w = 0, i;
-	char *ret = "\r";
-
-	for (i = 0; i < nb; ++i) {
-		if (ptr[i] == '\n') {
-			if (i > w) {
-				write(f, ptr + w, i - w);
-				w = i;
-			}
-			write(f, ret, 1);
-		}
-	}
-	if (w < nb)
-		write(f, ptr + w, nb - w);
-	return nb;
-}
-
-int
-putc(int c, void *f)
-{
-    char ch = c;
-
-    return writestring(f, &ch, 1) == 1? c: -1;
-}
-
-int
-putchar(int c)
-{
-    return putc(c, stdout);
-}
-
-int
-fputs(char *str, void *f)
-{
-    int n = strlen(str);
-
-    return writestring(f, str, n) == n? 0: -1;
-}
-
-int
-readchar(void)
-{
-    char ch;
-
-    for (;;) {
-	switch (read(stdin, &ch, 1)) {
-	case 1:
-	    return ch;
-	case -1:
-	    printk("read(stdin) returned -1\n");
-	    return -1;
-	}
-    }
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-int
-getchar(void)
-{
-    int c;
-
-    if (lineleft == 0) {
-	lineptr = line;
-	for (;;) {
-	    c = readchar();
-	    if (c == -1 || c == 4)
-		break;
-	    if (c == '\r' || c == '\n') {
-		*lineptr++ = '\n';
-		putchar('\n');
-		break;
-	    }
-	    switch (c) {
-	    case 0177:
-	    case '\b':
-		if (lineptr > line) {
-		    putchar('\b');
-		    putchar(' ');
-		    putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    case 'U' & 0x1F:
-		while (lineptr > line) {
-		    putchar('\b');
-		    putchar(' ');
-		    putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    default:
-		if (lineptr >= &line[sizeof(line) - 1])
-		    putchar('\a');
-		else {
-		    putchar(c);
-		    *lineptr++ = c;
-		}
-	    }
-	}
-	lineleft = lineptr - line;
-	lineptr = line;
-    }
-    if (lineleft == 0)
-	return -1;
-    --lineleft;
-    return *lineptr++;
-}
-
-extern int vsprintf(char *buf, const char *fmt, va_list args);
-static char sprint_buf[1024];
-
-void
-printk(char *fmt, ...)
-{
-	va_list args;
-	int n;
-
-	va_start(args, fmt);
-	n = vsprintf(sprint_buf, fmt, args);
-	va_end(args);
-	writestring(stdout, sprint_buf, n);
-}
-
-int
-printf(char *fmt, ...)
-{
-	va_list args;
-	int n;
-
-	va_start(args, fmt);
-	n = vsprintf(sprint_buf, fmt, args);
-	va_end(args);
-	writestring(stdout, sprint_buf, n);
-	return n;
-}
diff --git a/arch/ppc/boot/simple/mpc10x_memory.c b/arch/ppc/boot/simple/mpc10x_memory.c
index c242908..8da8f57 100644
--- a/arch/ppc/boot/simple/mpc10x_memory.c
+++ b/arch/ppc/boot/simple/mpc10x_memory.c
@@ -50,10 +50,10 @@ MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0)
  * the system.  This assumes that the firmware has correctly set up the memory
  * controller registers.  On CONFIG_PPC_PREP, we know we are being called
  * under a PReP memory map. On all other machines, we assume we are under
- * a CHRP memory map.  Further, on CONFIG_PPC_MULTIPLATFORM we must rename
+ * a CHRP memory map.  Further, on CONFIG_PPC_PREP we must rename
  * this function.
  */
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PREP
 #define get_mem_size mpc10x_get_mem_size
 #endif
 unsigned long
diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S
index 7efddc5..2533113 100644
--- a/arch/ppc/boot/simple/relocate.S
+++ b/arch/ppc/boot/simple/relocate.S
@@ -194,7 +194,7 @@ start_ldr:
 	/*
 	 * Start at the begining.
 	 */
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PREP
 	li	r9,0xc
 	mtlr	r9
 	/* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD,
diff --git a/arch/ppc/boot/utils/addnote.c b/arch/ppc/boot/utils/addnote.c
deleted file mode 100644
index 6c52b18..0000000
--- a/arch/ppc/boot/utils/addnote.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * Program to hack in a PT_NOTE program header entry in an ELF file.
- * This is needed for OF on RS/6000s to load an image correctly.
- * Note that OF needs a program header entry for the note, not an
- * ELF section.
- *
- * Copyright 2000 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Usage: addnote zImage
- */
-#include <stdio.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-
-char arch[] = "PowerPC";
-
-#define N_DESCR	6
-unsigned int descr[N_DESCR] = {
-#if 1
-	/* values for IBM RS/6000 machines */
-	0xffffffff,		/* real-mode = true */
-	0x00c00000,		/* real-base, i.e. where we expect OF to be */
-	0xffffffff,		/* real-size */
-	0xffffffff,		/* virt-base */
-	0xffffffff,		/* virt-size */
-	0x4000,			/* load-base */
-#else
-	/* values for longtrail CHRP */
-	0,			/* real-mode = false */
-	0xffffffff,		/* real-base */
-	0xffffffff,		/* real-size */
-	0xffffffff,		/* virt-base */
-	0xffffffff,		/* virt-size */
-	0x00600000,		/* load-base */
-#endif
-};
-
-unsigned char buf[512];
-
-#define GET_16BE(off)	((buf[off] << 8) + (buf[(off)+1]))
-#define GET_32BE(off)	((GET_16BE(off) << 16) + GET_16BE((off)+2))
-
-#define PUT_16BE(off, v)	(buf[off] = ((v) >> 8) & 0xff, \
-				 buf[(off) + 1] = (v) & 0xff)
-#define PUT_32BE(off, v)	(PUT_16BE((off), (v) >> 16), \
-				 PUT_16BE((off) + 2, (v)))
-
-/* Structure of an ELF file */
-#define E_IDENT		0	/* ELF header */
-#define	E_PHOFF		28
-#define E_PHENTSIZE	42
-#define E_PHNUM		44
-#define E_HSIZE		52	/* size of ELF header */
-
-#define EI_MAGIC	0	/* offsets in E_IDENT area */
-#define EI_CLASS	4
-#define EI_DATA		5
-
-#define PH_TYPE		0	/* ELF program header */
-#define PH_OFFSET	4
-#define PH_FILESZ	16
-#define PH_HSIZE	32	/* size of program header */
-
-#define PT_NOTE		4	/* Program header type = note */
-
-#define ELFCLASS32	1
-#define ELFDATA2MSB	2
-
-unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' };
-
-int main(int ac, char **av)
-{
-	int fd, n, i;
-	int ph, ps, np;
-	int nnote, ns;
-
-	if (ac != 2) {
-		fprintf(stderr, "Usage: %s elf-file\n", av[0]);
-		exit(1);
-	}
-	fd = open(av[1], O_RDWR);
-	if (fd < 0) {
-		perror(av[1]);
-		exit(1);
-	}
-
-	nnote = strlen(arch) + 1 + (N_DESCR + 3) * 4;
-
-	n = read(fd, buf, sizeof(buf));
-	if (n < 0) {
-		perror("read");
-		exit(1);
-	}
-
-	if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0)
-		goto notelf;
-
-	if (buf[E_IDENT+EI_CLASS] != ELFCLASS32
-	    || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) {
-		fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n",
-			av[1]);
-		exit(1);
-	}
-
-	ph = GET_32BE(E_PHOFF);
-	ps = GET_16BE(E_PHENTSIZE);
-	np = GET_16BE(E_PHNUM);
-	if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
-		goto notelf;
-	if (ph + (np + 1) * ps + nnote > n)
-		goto nospace;
-
-	for (i = 0; i < np; ++i) {
-		if (GET_32BE(ph + PH_TYPE) == PT_NOTE) {
-			fprintf(stderr, "%s already has a note entry\n",
-				av[1]);
-			exit(0);
-		}
-		ph += ps;
-	}
-
-	/* XXX check that the area we want to use is all zeroes */
-	for (i = 0; i < ps + nnote; ++i)
-		if (buf[ph + i] != 0)
-			goto nospace;
-
-	/* fill in the program header entry */
-	ns = ph + ps;
-	PUT_32BE(ph + PH_TYPE, PT_NOTE);
-	PUT_32BE(ph + PH_OFFSET, ns);
-	PUT_32BE(ph + PH_FILESZ, nnote);
-
-	/* fill in the note area we point to */
-	/* XXX we should probably make this a proper section */
-	PUT_32BE(ns, strlen(arch) + 1);
-	PUT_32BE(ns + 4, N_DESCR * 4);
-	PUT_32BE(ns + 8, 0x1275);
-	strcpy(&buf[ns + 12], arch);
-	ns += 12 + strlen(arch) + 1;
-	for (i = 0; i < N_DESCR; ++i)
-		PUT_32BE(ns + i * 4, descr[i]);
-
-	/* Update the number of program headers */
-	PUT_16BE(E_PHNUM, np + 1);
-
-	/* write back */
-	lseek(fd, (long) 0, SEEK_SET);
-	i = write(fd, buf, n);
-	if (i < 0) {
-		perror("write");
-		exit(1);
-	}
-	if (i < n) {
-		fprintf(stderr, "%s: write truncated\n", av[1]);
-		exit(1);
-	}
-
-	exit(0);
-
- notelf:
-	fprintf(stderr, "%s does not appear to be an ELF file\n", av[0]);
-	exit(1);
-
- nospace:
-	fprintf(stderr, "sorry, I can't find space in %s to put the note\n",
-		av[0]);
-	exit(1);
-}
diff --git a/arch/ppc/boot/utils/hack-coff.c b/arch/ppc/boot/utils/hack-coff.c
deleted file mode 100644
index 5e5a657..0000000
--- a/arch/ppc/boot/utils/hack-coff.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * hack-coff.c - hack the header of an xcoff file to fill in
- * a few fields needed by the Open Firmware xcoff loader on
- * Power Macs but not initialized by objcopy.
- *
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <string.h>
-#include "rs6000.h"
-
-#define AOUT_MAGIC	0x010b
-
-#define get_16be(x)	((((unsigned char *)(x))[0] << 8) \
-			 + ((unsigned char *)(x))[1])
-#define put_16be(x, v)	(((unsigned char *)(x))[0] = (v) >> 8, \
-			 ((unsigned char *)(x))[1] = (v) & 0xff)
-#define get_32be(x)	((((unsigned char *)(x))[0] << 24) \
-			 + (((unsigned char *)(x))[1] << 16) \
-			 + (((unsigned char *)(x))[2] << 8) \
-			 + ((unsigned char *)(x))[3])
-
-int
-main(int ac, char **av)
-{
-    int fd;
-    int i, nsect;
-    int aoutsz;
-    struct external_filehdr fhdr;
-    AOUTHDR aout;
-    struct external_scnhdr shdr;
-
-    if (ac != 2) {
-	fprintf(stderr, "Usage: hack-coff coff-file\n");
-	exit(1);
-    }
-    if ((fd = open(av[1], 2)) == -1) {
-	perror(av[2]);
-	exit(1);
-    }
-    if (read(fd, &fhdr, sizeof(fhdr)) != sizeof(fhdr))
-	goto readerr;
-    i = get_16be(fhdr.f_magic);
-    if (i != U802TOCMAGIC && i != U802WRMAGIC && i != U802ROMAGIC) {
-	fprintf(stderr, "%s: not an xcoff file\n", av[1]);
-	exit(1);
-    }
-    aoutsz = get_16be(fhdr.f_opthdr);
-    if (read(fd, &aout, aoutsz) != aoutsz)
-	goto readerr;
-    nsect = get_16be(fhdr.f_nscns);
-    for (i = 0; i < nsect; ++i) {
-	if (read(fd, &shdr, sizeof(shdr)) != sizeof(shdr))
-	    goto readerr;
-	if (strcmp(shdr.s_name, ".text") == 0) {
-	    put_16be(aout.o_snentry, i+1);
-	    put_16be(aout.o_sntext, i+1);
-	} else if (strcmp(shdr.s_name, ".data") == 0) {
-	    put_16be(aout.o_sndata, i+1);
-	} else if (strcmp(shdr.s_name, ".bss") == 0) {
-	    put_16be(aout.o_snbss, i+1);
-	}
-    }
-    put_16be(aout.magic, AOUT_MAGIC);
-    if (lseek(fd, (long) sizeof(struct external_filehdr), 0) == -1
-	|| write(fd, &aout, aoutsz) != aoutsz) {
-	fprintf(stderr, "%s: write error\n", av[1]);
-	exit(1);
-    }
-    close(fd);
-    exit(0);
-
-readerr:
-    fprintf(stderr, "%s: read error or file too short\n", av[1]);
-    exit(1);
-}
diff --git a/arch/ppc/boot/utils/mknote.c b/arch/ppc/boot/utils/mknote.c
deleted file mode 100644
index b9fbb2c..0000000
--- a/arch/ppc/boot/utils/mknote.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) Cort Dougan 1999.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Generate a note section as per the CHRP specification.
- *
- */
-
-#include <stdio.h>
-#include <string.h>
-
-#define PL(x) printf("%c%c%c%c", ((x)>>24)&0xff, ((x)>>16)&0xff, ((x)>>8)&0xff, (x)&0xff );
-
-int main(void)
-{
-/* header */
-	/* namesz */
-	PL(strlen("PowerPC")+1);
-	/* descrsz */
-	PL(6*4);
-	/* type */
-	PL(0x1275);
-	/* name */
-	printf("PowerPC"); printf("%c", 0);
-	
-/* descriptor */
-	/* real-mode */
-	PL(0xffffffff);
-	/* real-base */
-	PL(0x00c00000);
-	/* real-size */
-	PL(0xffffffff);
-	/* virt-base */
-	PL(0xffffffff);
-	/* virt-size */
-	PL(0xffffffff);
-	/* load-base */
-	PL(0x4000);
-	return 0;
-}
diff --git a/arch/ppc/configs/ibmchrp_defconfig b/arch/ppc/configs/ibmchrp_defconfig
deleted file mode 100644
index 27f3e69..0000000
--- a/arch/ppc/configs/ibmchrp_defconfig
+++ /dev/null
@@ -1,875 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PREP=y
-CONFIG_PPC_OF=y
-CONFIG_PPCBUG_NVRAM=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HIGHMEM=y
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PPC_RTAS=y
-# CONFIG_PREP_RESIDUAL is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_LBD=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_ADB is not set
-# CONFIG_ADB_CUDA is not set
-# CONFIG_ADB_PMU is not set
-# CONFIG_MAC_FLOPPY is not set
-# CONFIG_MAC_SERIAL is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_RAW=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_CONSOLE is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-# CONFIG_SERIAL_PMACZILOG is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S3TRIO is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_FB_MATROX_G450 is not set
-CONFIG_FB_MATROX_G100A=y
-CONFIG_FB_MATROX_G100=y
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-CONFIG_FB_3DFX=y
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_EXPORTFS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_BOOTX_TEXT is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/pmac_defconfig b/arch/ppc/configs/pmac_defconfig
deleted file mode 100644
index a2db8b5..0000000
--- a/arch/ppc/configs/pmac_defconfig
+++ /dev/null
@@ -1,1591 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc3
-# Wed Jul 13 14:13:13 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
-# CONFIG_TAU_AVERAGE is not set
-# CONFIG_KEXEC is not set
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=m
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PMAC=y
-CONFIG_PPC601_SYNC_FIX=y
-CONFIG_PM=y
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PREP=y
-CONFIG_PPC_OF=y
-CONFIG_PPCBUG_NVRAM=y
-# CONFIG_SMP is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_PREP_RESIDUAL is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_SOFTWARE_SUSPEND=y
-CONFIG_PM_STD_PARTITION=""
-# CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_ISA is not set
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-CONFIG_PCMCIA=m
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-# CONFIG_PD6729 is not set
-# CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE_BOOL=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-CONFIG_IRDA_CACHE_LAST_LSAP=y
-CONFIG_IRDA_FAST_RR=y
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-CONFIG_IRTTY_SIR=m
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_TOSHIBA_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-# CONFIG_VLSI_FIR is not set
-# CONFIG_VIA_FIR is not set
-# CONFIG_BT is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_MAC_FLOPPY=m
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LBD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-CONFIG_BLK_DEV_PDC202XX_NEW=y
-# CONFIG_PDC202XX_FORCE is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
-CONFIG_BLK_DEV_IDE_PMAC_BLINK=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_AIC7XXX_OLD=m
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_SCSI_MESH=y
-CONFIG_SCSI_MESH_SYNC_RATE=5
-CONFIG_SCSI_MESH_RESET_DELAY_MS=1000
-CONFIG_SCSI_MAC53C94=y
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_IEEE1394_OUI_DB is not set
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-# CONFIG_IEEE1394_EXPORT_FULL_API is not set
-
-#
-# Device Drivers
-#
-# CONFIG_IEEE1394_PCILYNX is not set
-CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_PMAC_APM_EMU=y
-CONFIG_PMAC_MEDIABAY=y
-CONFIG_PMAC_BACKLIGHT=y
-CONFIG_ADB_MACIO=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_MAC_EMUMOUSEBTN=y
-CONFIG_THERM_WINDTUNNEL=m
-CONFIG_THERM_ADT746X=m
-# CONFIG_ANSLCD is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACE=y
-# CONFIG_MACE_AAUI_PORT is not set
-CONFIG_BMAC=y
-# CONFIG_HAPPYMEAL is not set
-CONFIG_SUNGEM=y
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
-#
-# CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-CONFIG_HERMES=m
-CONFIG_APPLE_AIRPORT=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_WL3501 is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_CS=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-CONFIG_AGP=m
-CONFIG_AGP_UNINORTH=m
-CONFIG_DRM=m
-# CONFIG_DRM_TDFX is not set
-CONFIG_DRM_R128=m
-CONFIG_DRM_RADEON=m
-# CONFIG_DRM_MGA is not set
-# CONFIG_DRM_SIS is not set
-# CONFIG_DRM_VIA is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
-CONFIG_I2C_KEYWEST=m
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
-CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-CONFIG_FB_CONTROL=y
-CONFIG_FB_PLATINUM=y
-CONFIG_FB_VALKYRIE=y
-CONFIG_FB_CT65550=y
-# CONFIG_FB_ASILIANT is not set
-CONFIG_FB_IMSTT=y
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-# CONFIG_FB_MATROX_I2C is not set
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON_OLD is not set
-CONFIG_FB_RADEON=y
-CONFIG_FB_RADEON_I2C=y
-# CONFIG_FB_RADEON_DEBUG is not set
-CONFIG_FB_ATY128=y
-CONFIG_FB_ATY=y
-CONFIG_FB_ATY_CT=y
-CONFIG_FB_ATY_GENERIC_LCD=y
-# CONFIG_FB_ATY_XL_INIT is not set
-CONFIG_FB_ATY_GX=y
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-CONFIG_FB_3DFX=y
-CONFIG_FB_3DFX_ACCEL=y
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-CONFIG_DMASOUND_PMAC=m
-CONFIG_DMASOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_DUMMY=m
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
-
-#
-# ALSA PowerMac devices
-#
-CONFIG_SND_POWERMAC=m
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_USX2Y=m
-
-#
-# PCMCIA devices
-#
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-CONFIG_BOOTX_TEXT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/power3_defconfig b/arch/ppc/configs/power3_defconfig
deleted file mode 100644
index a1ef929..0000000
--- a/arch/ppc/configs/power3_defconfig
+++ /dev/null
@@ -1,1035 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_HOTPLUG is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-CONFIG_POWER3=y
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC64BRIDGE=y
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_CHRP=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_PREP=y
-CONFIG_PPC_OF=y
-CONFIG_PPCBUG_NVRAM=y
-CONFIG_SMP=y
-# CONFIG_IRQ_ALL_CPUS is not set
-CONFIG_NR_CPUS=32
-# CONFIG_PREEMPT is not set
-CONFIG_HIGHMEM=y
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PPC_RTAS=y
-# CONFIG_PREP_RESIDUAL is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-# CONFIG_HIGHMEM_START_BOOL is not set
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE_BOOL=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
-# CONFIG_PARPORT_SERIAL is not set
-CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_LBD=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=y
-# CONFIG_MD_MULTIPATH is not set
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_ADB is not set
-# CONFIG_ADB_CUDA is not set
-# CONFIG_ADB_PMU is not set
-# CONFIG_MAC_FLOPPY is not set
-# CONFIG_MAC_SERIAL is not set
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_MACE is not set
-# CONFIG_BMAC is not set
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-CONFIG_GAMEPORT=m
-CONFIG_SOUND_GAMEPORT=m
-# CONFIG_GAMEPORT_NS558 is not set
-# CONFIG_GAMEPORT_L4 is not set
-# CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
-# CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461x is not set
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=m
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCF=y
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_KEYWEST is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S3TRIO is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-# CONFIG_FB_MATROX_G450 is not set
-CONFIG_FB_MATROX_G100A=y
-CONFIG_FB_MATROX_G100=y
-CONFIG_FB_MATROX_I2C=y
-# CONFIG_FB_MATROX_MAVEN is not set
-CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-# CONFIG_DMASOUND_PMAC is not set
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-CONFIG_SND_DUMMY=m
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ISA devices
-#
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_CS4231 is not set
-CONFIG_SND_CS4232=m
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_WAVEFRONT is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-
-#
-# PCI devices
-#
-CONFIG_SND_AC97_CODEC=m
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-CONFIG_SND_CS46XX=m
-# CONFIG_SND_CS46XX_NEW_DSP is not set
-CONFIG_SND_CS4281=m
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VX222 is not set
-
-#
-# ALSA PowerMac devices
-#
-# CONFIG_SND_POWERMAC is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_BOOTX_TEXT=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
diff --git a/arch/ppc/configs/common_defconfig b/arch/ppc/configs/prep_defconfig
index 4d33bee..4d33bee 100644
--- a/arch/ppc/configs/common_defconfig
+++ b/arch/ppc/configs/prep_defconfig
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index e399bbb..466437f 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -1,48 +1,24 @@
 #
 # Makefile for the linux kernel.
 #
-ifneq ($(CONFIG_PPC_MERGE),y)
-
 extra-$(CONFIG_PPC_STD_MMU)	:= head.o
 extra-$(CONFIG_40x)		:= head_4xx.o
 extra-$(CONFIG_44x)		:= head_44x.o
 extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
 extra-$(CONFIG_8xx)		:= head_8xx.o
-extra-$(CONFIG_6xx)		+= idle_6xx.o
 extra-y				+= vmlinux.lds
 
-obj-y				:= entry.o traps.o idle.o time.o misc.o \
+obj-y				:= entry.o traps.o time.o misc.o \
 					setup.o \
 					ppc_htab.o
-obj-$(CONFIG_6xx)		+= l2cr.o cpu_setup_6xx.o
-obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
-obj-$(CONFIG_MODULES)		+= module.o ppc_ksyms.o
+obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
 obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-mapping.o
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_RAPIDIO)		+= rio.o
 obj-$(CONFIG_KGDB)		+= ppc-stub.o
 obj-$(CONFIG_SMP)		+= smp.o smp-tbsync.o
-obj-$(CONFIG_TAU)		+= temp.o
-ifndef CONFIG_E200
-obj-$(CONFIG_FSL_BOOKE)		+= perfmon_fsl_booke.o
-endif
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 
 ifndef CONFIG_MATH_EMULATION
 obj-$(CONFIG_8xx)		+= softemu8xx.o
 endif
-
-# These are here while we do the architecture merge
-
-else
-obj-y				:= idle.o
-obj-$(CONFIG_6xx)		+= l2cr.o cpu_setup_6xx.o
-obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o
-obj-$(CONFIG_MODULES)		+= module.o
-obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-mapping.o
-obj-$(CONFIG_KGDB)		+= ppc-stub.o
-obj-$(CONFIG_TAU)		+= temp.o
-ifndef CONFIG_E200
-obj-$(CONFIG_FSL_BOOKE)		+= perfmon_fsl_booke.o
-endif
-endif
diff --git a/arch/ppc/kernel/cpu_setup_6xx.S b/arch/ppc/kernel/cpu_setup_6xx.S
deleted file mode 100644
index 55ed771..0000000
--- a/arch/ppc/kernel/cpu_setup_6xx.S
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * This file contains low level CPU setup functions.
- *    Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/config.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cputable.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/cache.h>
-
-_GLOBAL(__setup_cpu_603)
-	b	setup_common_caches
-_GLOBAL(__setup_cpu_604)
-	mflr	r4
-	bl	setup_common_caches
-	bl	setup_604_hid0
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_750)
-	mflr	r4
-	bl	__init_fpu_registers
-	bl	setup_common_caches
-	bl	setup_750_7400_hid0
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_750cx)
-	mflr	r4
-	bl	__init_fpu_registers
-	bl	setup_common_caches
-	bl	setup_750_7400_hid0
-	bl	setup_750cx
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_750fx)
-	mflr	r4
-	bl	__init_fpu_registers
-	bl	setup_common_caches
-	bl	setup_750_7400_hid0
-	bl	setup_750fx
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_7400)
-	mflr	r4
-	bl	__init_fpu_registers
-	bl	setup_7400_workarounds
-	bl	setup_common_caches
-	bl	setup_750_7400_hid0
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_7410)
-	mflr	r4
-	bl	__init_fpu_registers
-	bl	setup_7410_workarounds
-	bl	setup_common_caches
-	bl	setup_750_7400_hid0
-	li	r3,0
-	mtspr	SPRN_L2CR2,r3
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_745x)
-	mflr	r4
-	bl	setup_common_caches
-	bl	setup_745x_specifics
-	mtlr	r4
-	blr
-
-/* Enable caches for 603's, 604, 750 & 7400 */
-setup_common_caches:
-	mfspr	r11,SPRN_HID0
-	andi.	r0,r11,HID0_DCE
-	ori	r11,r11,HID0_ICE|HID0_DCE
-	ori	r8,r11,HID0_ICFI
-	bne	1f			/* don't invalidate the D-cache */
-	ori	r8,r8,HID0_DCI		/* unless it wasn't enabled */
-1:	sync
-	mtspr	SPRN_HID0,r8		/* enable and invalidate caches */
-	sync
-	mtspr	SPRN_HID0,r11		/* enable caches */
-	sync
-	isync
-	blr
-
-/* 604, 604e, 604ev, ...
- * Enable superscalar execution & branch history table
- */
-setup_604_hid0:
-	mfspr	r11,SPRN_HID0
-	ori	r11,r11,HID0_SIED|HID0_BHTE
-	ori	r8,r11,HID0_BTCD
-	sync
-	mtspr	SPRN_HID0,r8	/* flush branch target address cache */
-	sync			/* on 604e/604r */
-	mtspr	SPRN_HID0,r11
-	sync
-	isync
-	blr
-
-/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
- * erratas we work around here.
- * Moto MPC710CE.pdf describes them, those are errata
- * #3, #4 and #5
- * Note that we assume the firmware didn't choose to
- * apply other workarounds (there are other ones documented
- * in the .pdf). It appear that Apple firmware only works
- * around #3 and with the same fix we use. We may want to
- * check if the CPU is using 60x bus mode in which case
- * the workaround for errata #4 is useless. Also, we may
- * want to explicitely clear HID0_NOPDST as this is not
- * needed once we have applied workaround #5 (though it's
- * not set by Apple's firmware at least).
- */
-setup_7400_workarounds:
-	mfpvr	r3
-	rlwinm	r3,r3,0,20,31
-	cmpwi	0,r3,0x0207
-	ble	1f
-	blr
-setup_7410_workarounds:
-	mfpvr	r3
-	rlwinm	r3,r3,0,20,31
-	cmpwi	0,r3,0x0100
-	bnelr
-1:
-	mfspr	r11,SPRN_MSSSR0
-	/* Errata #3: Set L1OPQ_SIZE to 0x10 */
-	rlwinm	r11,r11,0,9,6
-	oris	r11,r11,0x0100
-	/* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */
-	oris	r11,r11,0x0002
-	/* Errata #5: Set DRLT_SIZE to 0x01 */
-	rlwinm	r11,r11,0,5,2
-	oris	r11,r11,0x0800
-	sync
-	mtspr	SPRN_MSSSR0,r11
-	sync
-	isync
-	blr
-
-/* 740/750/7400/7410
- * Enable Store Gathering (SGE), Address Brodcast (ABE),
- * Branch History Table (BHTE), Branch Target ICache (BTIC)
- * Dynamic Power Management (DPM), Speculative (SPD)
- * Clear Instruction cache throttling (ICTC)
- */
-setup_750_7400_hid0:
-	mfspr	r11,SPRN_HID0
-	ori	r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC
-	oris	r11,r11,HID0_DPM@h
-BEGIN_FTR_SECTION
-	xori	r11,r11,HID0_BTIC
-END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
-BEGIN_FTR_SECTION
-	xoris	r11,r11,HID0_DPM@h	/* disable dynamic power mgmt */
-END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
-	li	r3,HID0_SPD
-	andc	r11,r11,r3		/* clear SPD: enable speculative */
- 	li	r3,0
- 	mtspr	SPRN_ICTC,r3		/* Instruction Cache Throttling off */
-	isync
-	mtspr	SPRN_HID0,r11
-	sync
-	isync
-	blr
-
-/* 750cx specific
- * Looks like we have to disable NAP feature for some PLL settings...
- * (waiting for confirmation)
- */
-setup_750cx:
-	mfspr	r10, SPRN_HID1
-	rlwinm	r10,r10,4,28,31
-	cmpwi	cr0,r10,7
-	cmpwi	cr1,r10,9
-	cmpwi	cr2,r10,11
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr2+eq
-	bnelr
-	lwz	r6,CPU_SPEC_FEATURES(r5)
-	li	r7,CPU_FTR_CAN_NAP
-	andc	r6,r6,r7
-	stw	r6,CPU_SPEC_FEATURES(r5)
-	blr
-
-/* 750fx specific
- */
-setup_750fx:
-	blr
-
-/* MPC 745x
- * Enable Store Gathering (SGE), Branch Folding (FOLD)
- * Branch History Table (BHTE), Branch Target ICache (BTIC)
- * Dynamic Power Management (DPM), Speculative (SPD)
- * Ensure our data cache instructions really operate.
- * Timebase has to be running or we wouldn't have made it here,
- * just ensure we don't disable it.
- * Clear Instruction cache throttling (ICTC)
- * Enable L2 HW prefetch
- */
-setup_745x_specifics:
-	/* We check for the presence of an L3 cache setup by
-	 * the firmware. If any, we disable NAP capability as
-	 * it's known to be bogus on rev 2.1 and earlier
-	 */
-	mfspr	r11,SPRN_L3CR
-	andis.	r11,r11,L3CR_L3E@h
-	beq	1f
-	lwz	r6,CPU_SPEC_FEATURES(r5)
-	andi.	r0,r6,CPU_FTR_L3_DISABLE_NAP
-	beq	1f
-	li	r7,CPU_FTR_CAN_NAP
-	andc	r6,r6,r7
-	stw	r6,CPU_SPEC_FEATURES(r5)
-1:
-	mfspr	r11,SPRN_HID0
-
-	/* All of the bits we have to set.....
-	 */
-	ori	r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE
-	ori	r11,r11,HID0_LRSTK | HID0_BTIC
-	oris	r11,r11,HID0_DPM@h
-BEGIN_FTR_SECTION
-	xori	r11,r11,HID0_BTIC
-END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
-BEGIN_FTR_SECTION
-	xoris	r11,r11,HID0_DPM@h	/* disable dynamic power mgmt */
-END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
-
-	/* All of the bits we have to clear....
-	 */
-	li	r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI
-	andc	r11,r11,r3		/* clear SPD: enable speculative */
- 	li	r3,0
-
- 	mtspr	SPRN_ICTC,r3		/* Instruction Cache Throttling off */
-	isync
-	mtspr	SPRN_HID0,r11
-	sync
-	isync
-
-	/* Enable L2 HW prefetch, if L2 is enabled
-	 */
-	mfspr	r3,SPRN_L2CR
-	andis.	r3,r3,L2CR_L2E@h
-	beqlr
-	mfspr	r3,SPRN_MSSCR0
-	ori	r3,r3,3
-	sync
-	mtspr	SPRN_MSSCR0,r3
-	sync
-	isync
-	blr
-
-/*
- * Initialize the FPU registers. This is needed to work around an errata
- * in some 750 cpus where using a not yet initialized FPU register after
- * power on reset may hang the CPU
- */
-_GLOBAL(__init_fpu_registers)
-	mfmsr	r10
-	ori	r11,r10,MSR_FP
-	mtmsr	r11
-	isync
-	addis	r9,r3,empty_zero_page@ha
-	addi	r9,r9,empty_zero_page@l
-	REST_32FPRS(0,r9)
-	sync
-	mtmsr	r10
-	isync
-	blr
-
-
-/* Definitions for the table use to save CPU states */
-#define CS_HID0		0
-#define CS_HID1		4
-#define CS_HID2		8
-#define	CS_MSSCR0	12
-#define CS_MSSSR0	16
-#define CS_ICTRL	20
-#define CS_LDSTCR	24
-#define CS_LDSTDB	28
-#define CS_SIZE		32
-
-	.data
-	.balign	L1_CACHE_BYTES
-cpu_state_storage:
-	.space	CS_SIZE
-	.balign	L1_CACHE_BYTES,0
-	.text
-
-/* Called in normal context to backup CPU 0 state. This
- * does not include cache settings. This function is also
- * called for machine sleep. This does not include the MMU
- * setup, BATs, etc... but rather the "special" registers
- * like HID0, HID1, MSSCR0, etc...
- */
-_GLOBAL(__save_cpu_setup)
-	/* Some CR fields are volatile, we back it up all */
-	mfcr	r7
-
-	/* Get storage ptr */
-	lis	r5,cpu_state_storage@h
-	ori	r5,r5,cpu_state_storage@l
-
-	/* Save HID0 (common to all CONFIG_6xx cpus) */
-	mfspr	r3,SPRN_HID0
-	stw	r3,CS_HID0(r5)
-
-	/* Now deal with CPU type dependent registers */
-	mfspr	r3,SPRN_PVR
-	srwi	r3,r3,16
-	cmplwi	cr0,r3,0x8000	/* 7450 */
-	cmplwi	cr1,r3,0x000c	/* 7400 */
-	cmplwi	cr2,r3,0x800c	/* 7410 */
-	cmplwi	cr3,r3,0x8001	/* 7455 */
-	cmplwi	cr4,r3,0x8002	/* 7457 */
-	cmplwi	cr5,r3,0x8003	/* 7447A */
-	cmplwi	cr6,r3,0x7000	/* 750FX */
-	cmplwi	cr7,r3,0x8004	/* 7448 */
-	/* cr1 is 7400 || 7410 */
-	cror	4*cr1+eq,4*cr1+eq,4*cr2+eq
-	/* cr0 is 74xx */
-	cror	4*cr0+eq,4*cr0+eq,4*cr3+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr4+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr5+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr7+eq
-	bne	1f
-	/* Backup 74xx specific regs */
-	mfspr	r4,SPRN_MSSCR0
-	stw	r4,CS_MSSCR0(r5)
-	mfspr	r4,SPRN_MSSSR0
-	stw	r4,CS_MSSSR0(r5)
-	beq	cr1,1f
-	/* Backup 745x specific registers */
-	mfspr	r4,SPRN_HID1
-	stw	r4,CS_HID1(r5)
-	mfspr	r4,SPRN_ICTRL
-	stw	r4,CS_ICTRL(r5)
-	mfspr	r4,SPRN_LDSTCR
-	stw	r4,CS_LDSTCR(r5)
-	mfspr	r4,SPRN_LDSTDB
-	stw	r4,CS_LDSTDB(r5)
-1:
-	bne	cr6,1f
-	/* Backup 750FX specific registers */
-	mfspr	r4,SPRN_HID1
-	stw	r4,CS_HID1(r5)
-	/* If rev 2.x, backup HID2 */
-	mfspr	r3,SPRN_PVR
-	andi.	r3,r3,0xff00
-	cmpwi	cr0,r3,0x0200
-	bne	1f
-	mfspr	r4,SPRN_HID2
-	stw	r4,CS_HID2(r5)
-1:
-	mtcr	r7
-	blr
-
-/* Called with no MMU context (typically MSR:IR/DR off) to
- * restore CPU state as backed up by the previous
- * function. This does not include cache setting
- */
-_GLOBAL(__restore_cpu_setup)
-	/* Some CR fields are volatile, we back it up all */
-	mfcr	r7
-
-	/* Get storage ptr */
-	lis	r5,(cpu_state_storage-KERNELBASE)@h
-	ori	r5,r5,cpu_state_storage@l
-
-	/* Restore HID0 */
-	lwz	r3,CS_HID0(r5)
-	sync
-	isync
-	mtspr	SPRN_HID0,r3
-	sync
-	isync
-
-	/* Now deal with CPU type dependent registers */
-	mfspr	r3,SPRN_PVR
-	srwi	r3,r3,16
-	cmplwi	cr0,r3,0x8000	/* 7450 */
-	cmplwi	cr1,r3,0x000c	/* 7400 */
-	cmplwi	cr2,r3,0x800c	/* 7410 */
-	cmplwi	cr3,r3,0x8001	/* 7455 */
-	cmplwi	cr4,r3,0x8002	/* 7457 */
-	cmplwi	cr5,r3,0x8003	/* 7447A */
-	cmplwi	cr6,r3,0x7000	/* 750FX */
-	cmplwi	cr7,r3,0x8004	/* 7448 */
-	/* cr1 is 7400 || 7410 */
-	cror	4*cr1+eq,4*cr1+eq,4*cr2+eq
-	/* cr0 is 74xx */
-	cror	4*cr0+eq,4*cr0+eq,4*cr3+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr4+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr5+eq
-	cror	4*cr0+eq,4*cr0+eq,4*cr7+eq
-	bne	2f
-	/* Restore 74xx specific regs */
-	lwz	r4,CS_MSSCR0(r5)
-	sync
-	mtspr	SPRN_MSSCR0,r4
-	sync
-	isync
-	lwz	r4,CS_MSSSR0(r5)
-	sync
-	mtspr	SPRN_MSSSR0,r4
-	sync
-	isync
-	bne	cr2,1f
-	/* Clear 7410 L2CR2 */
-	li	r4,0
-	mtspr	SPRN_L2CR2,r4
-1:	beq	cr1,2f
-	/* Restore 745x specific registers */
-	lwz	r4,CS_HID1(r5)
-	sync
-	mtspr	SPRN_HID1,r4
-	isync
-	sync
-	lwz	r4,CS_ICTRL(r5)
-	sync
-	mtspr	SPRN_ICTRL,r4
-	isync
-	sync
-	lwz	r4,CS_LDSTCR(r5)
-	sync
-	mtspr	SPRN_LDSTCR,r4
-	isync
-	sync
-	lwz	r4,CS_LDSTDB(r5)
-	sync
-	mtspr	SPRN_LDSTDB,r4
-	isync
-	sync
-2:	bne	cr6,1f
-	/* Restore 750FX specific registers
-	 * that is restore HID2 on rev 2.x and PLL config & switch
-	 * to PLL 0 on all
-	 */
-	/* If rev 2.x, restore HID2 with low voltage bit cleared */
-	mfspr	r3,SPRN_PVR
-	andi.	r3,r3,0xff00
-	cmpwi	cr0,r3,0x0200
-	bne	4f
-	lwz	r4,CS_HID2(r5)
-	rlwinm	r4,r4,0,19,17
-	mtspr	SPRN_HID2,r4
-	sync
-4:
-	lwz	r4,CS_HID1(r5)
-	rlwinm  r5,r4,0,16,14
-	mtspr	SPRN_HID1,r5
-		/* Wait for PLL to stabilize */
-	mftbl	r5
-3:	mftbl	r6
-	sub	r6,r6,r5
-	cmplwi	cr0,r6,10000
-	ble	3b
-	/* Setup final PLL */
-	mtspr	SPRN_HID1,r4
-1:
-	mtcr	r7
-	blr
-
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index 3a28159..5891ecb 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -135,10 +135,10 @@ transfer_to_handler:
 	mfspr	r11,SPRN_HID0
 	mtcr	r11
 BEGIN_FTR_SECTION
-	bt-	8,power_save_6xx_restore	/* Check DOZE */
+	bt-	8,4f			/* Check DOZE */
 END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
 BEGIN_FTR_SECTION
-	bt-	9,power_save_6xx_restore	/* Check NAP */
+	bt-	9,4f			/* Check NAP */
 END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
 #endif /* CONFIG_6xx */
 	.globl transfer_to_handler_cont
@@ -157,6 +157,10 @@ transfer_to_handler_cont:
 	SYNC
 	RFI				/* jump to handler, enable MMU */
 
+#ifdef CONFIG_6xx
+4:	b	power_save_6xx_restore
+#endif
+
 /*
  * On kernel stack overflow, load up an initial stack pointer
  * and call StackOverflow(regs), which should not return.
@@ -926,55 +930,3 @@ END_FTR_SECTION_IFSET(CPU_FTR_601)
 	b	4b
 
 	.comm	ee_restarts,4
-
-/*
- * PROM code for specific machines follows.  Put it
- * here so it's easy to add arch-specific sections later.
- * -- Cort
- */
-#ifdef CONFIG_PPC_OF
-/*
- * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
- * called with the MMU off.
- */
-_GLOBAL(enter_rtas)
-	stwu	r1,-INT_FRAME_SIZE(r1)
-	mflr	r0
-	stw	r0,INT_FRAME_SIZE+4(r1)
-	lis	r4,rtas_data@ha
-	lwz	r4,rtas_data@l(r4)
-	lis	r6,1f@ha	/* physical return address for rtas */
-	addi	r6,r6,1f@l
-	tophys(r6,r6)
-	tophys(r7,r1)
-	lis	r8,rtas_entry@ha
-	lwz	r8,rtas_entry@l(r8)
-	mfmsr	r9
-	stw	r9,8(r1)
-	LOAD_MSR_KERNEL(r0,MSR_KERNEL)
-	SYNC			/* disable interrupts so SRR0/1 */
-	MTMSRD(r0)		/* don't get trashed */
-	li	r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
-	mtlr	r6
-	CLR_TOP32(r7)
-	mtspr	SPRN_SPRG2,r7
-	mtspr	SPRN_SRR0,r8
-	mtspr	SPRN_SRR1,r9
-	RFI
-1:	tophys(r9,r1)
-	lwz	r8,INT_FRAME_SIZE+4(r9)	/* get return address */
-	lwz	r9,8(r9)	/* original msr value */
-	FIX_SRR1(r9,r0)
-	addi	r1,r1,INT_FRAME_SIZE
-	li	r0,0
-	mtspr	SPRN_SPRG2,r0
-	mtspr	SPRN_SRR0,r8
-	mtspr	SPRN_SRR1,r9
-	RFI			/* return to caller */
-
-	.globl	machine_check_in_rtas
-machine_check_in_rtas:
-	twi	31,0,0
-	/* XXX load up BATs and panic */
-
-#endif /* CONFIG_PPC_OF */
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
index 53ea845..01303ef 100644
--- a/arch/ppc/kernel/head.S
+++ b/arch/ppc/kernel/head.S
@@ -37,19 +37,6 @@
 #include <asm/amigappc.h>
 #endif
 
-#ifdef CONFIG_PPC64BRIDGE
-#define LOAD_BAT(n, reg, RA, RB)	\
-	ld	RA,(n*32)+0(reg);	\
-	ld	RB,(n*32)+8(reg);	\
-	mtspr	SPRN_IBAT##n##U,RA;	\
-	mtspr	SPRN_IBAT##n##L,RB;	\
-	ld	RA,(n*32)+16(reg);	\
-	ld	RB,(n*32)+24(reg);	\
-	mtspr	SPRN_DBAT##n##U,RA;	\
-	mtspr	SPRN_DBAT##n##L,RB;	\
-
-#else /* CONFIG_PPC64BRIDGE */
-
 /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
 #define LOAD_BAT(n, reg, RA, RB)	\
 	/* see the comment for clear_bats() -- Cort */ \
@@ -66,7 +53,6 @@
 	mtspr	SPRN_DBAT##n##U,RA;	\
 	mtspr	SPRN_DBAT##n##L,RB;	\
 1:
-#endif /* CONFIG_PPC64BRIDGE */
 
 	.text
 	.stabs	"arch/ppc/kernel/",N_SO,0,0,0f
@@ -129,11 +115,6 @@ _start:
 
 	.globl	__start
 __start:
-/*
- * We have to do any OF calls before we map ourselves to KERNELBASE,
- * because OF may have I/O devices mapped into that area
- * (particularly on CHRP).
- */
 	mr	r31,r3			/* save parameters */
 	mr	r30,r4
 	mr	r29,r5
@@ -148,14 +129,6 @@ __start:
  */
 	bl	early_init
 
-/*
- * On POWER4, we first need to tweak some CPU configuration registers
- * like real mode cache inhibit or exception base
- */
-#ifdef CONFIG_POWER4
-	bl	__970_cpu_preinit
-#endif /* CONFIG_POWER4 */
-
 #ifdef CONFIG_APUS
 /* On APUS the __va/__pa constants need to be set to the correct
  * values before continuing.
@@ -169,7 +142,6 @@ __start:
  */
  	bl	mmu_off
 __after_mmu_off:
-#ifndef CONFIG_POWER4
 	bl	clear_bats
 	bl	flush_tlbs
 
@@ -177,10 +149,6 @@ __after_mmu_off:
 #if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
 	bl	setup_disp_bat
 #endif
-#else /* CONFIG_POWER4 */
-	bl	reloc_offset
-	bl	initial_mm_power4
-#endif /* CONFIG_POWER4 */
 
 /*
  * Call setup_cpu for CPU 0 and initialize 6xx Idle
@@ -192,18 +160,11 @@ __after_mmu_off:
 	bl	reloc_offset
 	bl	init_idle_6xx
 #endif /* CONFIG_6xx */
-#ifdef CONFIG_POWER4
-	bl	reloc_offset
-	bl	init_idle_power4
-#endif /* CONFIG_POWER4 */
 
 
 #ifndef CONFIG_APUS
 /*
  * We need to run with _start at physical address 0.
- * On CHRP, we are loaded at 0x10000 since OF on CHRP uses
- * the exception vectors at 0 (and therefore this copy
- * overwrites OF's exception vectors with our own).
  * If the MMU is already turned on, we copy stuff to KERNELBASE,
  * otherwise we copy it to 0.
  */
@@ -358,51 +319,19 @@ i##n:								\
 #endif
 
 /* Machine check */
-/*
- * On CHRP, this is complicated by the fact that we could get a
- * machine check inside RTAS, and we have no guarantee that certain
- * critical registers will have the values we expect.  The set of
- * registers that might have bad values includes all the GPRs
- * and all the BATs.  We indicate that we are in RTAS by putting
- * a non-zero value, the address of the exception frame to use,
- * in SPRG2.  The machine check handler checks SPRG2 and uses its
- * value if it is non-zero.  If we ever needed to free up SPRG2,
- * we could use a field in the thread_info or thread_struct instead.
- * (Other exception handlers assume that r1 is a valid kernel stack
- * pointer when we take an exception from supervisor mode.)
- *	-- paulus.
- */
 	. = 0x200
 	mtspr	SPRN_SPRG0,r10
 	mtspr	SPRN_SPRG1,r11
 	mfcr	r10
-#ifdef CONFIG_PPC_CHRP
-	mfspr	r11,SPRN_SPRG2
-	cmpwi	0,r11,0
-	bne	7f
-#endif /* CONFIG_PPC_CHRP */
 	EXCEPTION_PROLOG_1
 7:	EXCEPTION_PROLOG_2
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-#ifdef CONFIG_PPC_CHRP
-	mfspr	r4,SPRN_SPRG2
-	cmpwi	cr1,r4,0
-	bne	cr1,1f
-#endif
 	EXC_XFER_STD(0x200, machine_check_exception)
-#ifdef CONFIG_PPC_CHRP
-1:	b	machine_check_in_rtas
-#endif
 
 /* Data access exception. */
 	. = 0x300
-#ifdef CONFIG_PPC64BRIDGE
-	b	DataAccess
-DataAccessCont:
-#else
 DataAccess:
 	EXCEPTION_PROLOG
-#endif /* CONFIG_PPC64BRIDGE */
 	mfspr	r10,SPRN_DSISR
 	andis.	r0,r10,0xa470		/* weird error? */
 	bne	1f			/* if not, try to put a PTE */
@@ -414,21 +343,10 @@ DataAccess:
 	mfspr	r4,SPRN_DAR
 	EXC_XFER_EE_LITE(0x300, handle_page_fault)
 
-#ifdef CONFIG_PPC64BRIDGE
-/* SLB fault on data access. */
-	. = 0x380
-	b	DataSegment
-#endif /* CONFIG_PPC64BRIDGE */
-
 /* Instruction access exception. */
 	. = 0x400
-#ifdef CONFIG_PPC64BRIDGE
-	b	InstructionAccess
-InstructionAccessCont:
-#else
 InstructionAccess:
 	EXCEPTION_PROLOG
-#endif /* CONFIG_PPC64BRIDGE */
 	andis.	r0,r9,0x4000		/* no pte found? */
 	beq	1f			/* if so, try to put a PTE */
 	li	r3,0			/* into the hash table */
@@ -438,12 +356,6 @@ InstructionAccess:
 	mr	r5,r9
 	EXC_XFER_EE_LITE(0x400, handle_page_fault)
 
-#ifdef CONFIG_PPC64BRIDGE
-/* SLB fault on instruction access. */
-	. = 0x480
-	b	InstructionSegment
-#endif /* CONFIG_PPC64BRIDGE */
-
 /* External interrupt */
 	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
 
@@ -708,15 +620,9 @@ DataStoreTLBMiss:
 	EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
 	EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
 	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-#ifdef CONFIG_POWER4
-	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1700, Trap_17, altivec_assist_exception, EXC_XFER_EE)
-	EXCEPTION(0x1800, Trap_18, TAUException, EXC_XFER_STD)
-#else /* !CONFIG_POWER4 */
 	EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
 	EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
 	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-#endif /* CONFIG_POWER4 */
 	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
 	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
 	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
@@ -754,28 +660,6 @@ AltiVecUnavailable:
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
 
-#ifdef CONFIG_PPC64BRIDGE
-DataAccess:
-	EXCEPTION_PROLOG
-	b	DataAccessCont
-
-InstructionAccess:
-	EXCEPTION_PROLOG
-	b	InstructionAccessCont
-
-DataSegment:
-	EXCEPTION_PROLOG
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	mfspr	r4,SPRN_DAR
-	stw	r4,_DAR(r11)
-	EXC_XFER_STD(0x380, unknown_exception)
-
-InstructionSegment:
-	EXCEPTION_PROLOG
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x480, unknown_exception)
-#endif /* CONFIG_PPC64BRIDGE */
-
 #ifdef CONFIG_ALTIVEC
 /* Note that the AltiVec support is closely modeled after the FP
  * support.  Changes to one are likely to be applicable to the
@@ -1048,13 +932,6 @@ __secondary_start_pmac_0:
 
 	.globl	__secondary_start
 __secondary_start:
-#ifdef CONFIG_PPC64BRIDGE
-	mfmsr	r0
-	clrldi	r0,r0,1			/* make sure it's in 32-bit mode */
-	SYNC
-	MTMSRD(r0)
-	isync
-#endif
 	/* Copy some CPU settings from CPU 0 */
 	bl	__restore_cpu_setup
 
@@ -1065,10 +942,6 @@ __secondary_start:
 	lis	r3,-KERNELBASE@h
 	bl	init_idle_6xx
 #endif /* CONFIG_6xx */
-#ifdef CONFIG_POWER4
-	lis	r3,-KERNELBASE@h
-	bl	init_idle_power4
-#endif /* CONFIG_POWER4 */
 
 	/* get current_thread_info and current */
 	lis	r1,secondary_ti@ha
@@ -1109,12 +982,12 @@ __secondary_start:
  * Those generic dummy functions are kept for CPUs not
  * included in CONFIG_6xx
  */
-#if !defined(CONFIG_6xx) && !defined(CONFIG_POWER4)
+#if !defined(CONFIG_6xx)
 _GLOBAL(__save_cpu_setup)
 	blr
 _GLOBAL(__restore_cpu_setup)
 	blr
-#endif /* !defined(CONFIG_6xx) && !defined(CONFIG_POWER4) */
+#endif /* !defined(CONFIG_6xx) */
 
 
 /*
@@ -1132,11 +1005,6 @@ load_up_mmu:
 	tophys(r6,r6)
 	lwz	r6,_SDR1@l(r6)
 	mtspr	SPRN_SDR1,r6
-#ifdef CONFIG_PPC64BRIDGE
-	/* clear the ASR so we only use the pseudo-segment registers. */
-	li	r6,0
-	mtasr	r6
-#endif /* CONFIG_PPC64BRIDGE */
 	li	r0,16		/* load up segment register values */
 	mtctr	r0		/* for context 0 */
 	lis	r3,0x2000	/* Ku = 1, VSID = 0 */
@@ -1145,7 +1013,7 @@ load_up_mmu:
 	addi	r3,r3,0x111	/* increment VSID */
 	addis	r4,r4,0x1000	/* address of next segment */
 	bdnz	3b
-#ifndef CONFIG_POWER4
+
 /* Load the BAT registers with the values set up by MMU_init.
    MMU_init takes care of whether we're on a 601 or not. */
 	mfpvr	r3
@@ -1158,7 +1026,7 @@ load_up_mmu:
 	LOAD_BAT(1,r3,r4,r5)
 	LOAD_BAT(2,r3,r4,r5)
 	LOAD_BAT(3,r3,r4,r5)
-#endif /* CONFIG_POWER4 */
+
 	blr
 
 /*
@@ -1269,9 +1137,6 @@ _GLOBAL(set_context)
 	li	r4,0
 	isync
 3:
-#ifdef CONFIG_PPC64BRIDGE
-	slbie	r4
-#endif /* CONFIG_PPC64BRIDGE */
 	mtsrin	r3,r4
 	addi	r3,r3,0x111	/* next VSID */
 	rlwinm	r3,r3,0,8,3	/* clear out any overflow from VSID field */
@@ -1358,7 +1223,6 @@ mmu_off:
 	sync
 	RFI
 
-#ifndef CONFIG_POWER4
 /*
  * Use the first pair of BAT registers to map the 1st 16MB
  * of RAM to KERNELBASE.  From this point on we can't safely
@@ -1366,7 +1230,6 @@ mmu_off:
  */
 initial_bats:
 	lis	r11,KERNELBASE@h
-#ifndef CONFIG_PPC64BRIDGE
 	mfspr	r9,SPRN_PVR
 	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
 	cmpwi	0,r9,1
@@ -1381,7 +1244,6 @@ initial_bats:
 	mtspr	SPRN_IBAT1L,r10
 	isync
 	blr
-#endif /* CONFIG_PPC64BRIDGE */
 
 4:	tophys(r8,r11)
 #ifdef CONFIG_SMP
@@ -1395,11 +1257,6 @@ initial_bats:
 	ori	r11,r11,BL_256M<<2|0x2	/* set up BAT registers for 604 */
 #endif /* CONFIG_APUS */
 
-#ifdef CONFIG_PPC64BRIDGE
-	/* clear out the high 32 bits in the BAT */
-	clrldi	r11,r11,32
-	clrldi	r8,r8,32
-#endif /* CONFIG_PPC64BRIDGE */
 	mtspr	SPRN_DBAT0L,r8		/* N.B. 6xx (not 601) have valid */
 	mtspr	SPRN_DBAT0U,r11		/* bit in upper BAT register */
 	mtspr	SPRN_IBAT0L,r8
@@ -1432,38 +1289,6 @@ setup_disp_bat:
 
 #endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */
 
-#else /* CONFIG_POWER4 */
-/*
- * Load up the SDR1 and segment register values now
- * since we don't have the BATs.
- * Also make sure we are running in 32-bit mode.
- */
-
-initial_mm_power4:
-	addis	r14,r3,_SDR1@ha		/* get the value from _SDR1 */
-	lwz	r14,_SDR1@l(r14)	/* assume hash table below 4GB */
-	mtspr	SPRN_SDR1,r14
-	slbia
-	lis	r4,0x2000		/* set pseudo-segment reg 12 */
-	ori	r5,r4,0x0ccc
-	mtsr	12,r5
-#if 0
-	ori	r5,r4,0x0888		/* set pseudo-segment reg 8 */
-	mtsr	8,r5			/* (for access to serial port) */
-#endif
-#ifdef CONFIG_BOOTX_TEXT
-	ori	r5,r4,0x0999		/* set pseudo-segment reg 9 */
-	mtsr	9,r5			/* (for access to screen) */
-#endif
-	mfmsr	r0
-	clrldi	r0,r0,1
-	sync
-	mtmsr	r0
-	isync
-	blr
-
-#endif /* CONFIG_POWER4 */
-
 #ifdef CONFIG_8260
 /* Jump into the system reset for the rom.
  * We first disable the MMU, and then jump to the ROM reset address.
diff --git a/arch/ppc/kernel/idle.c b/arch/ppc/kernel/idle.c
deleted file mode 100644
index 1be3ca5..0000000
--- a/arch/ppc/kernel/idle.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Idle daemon for PowerPC.  Idle daemon will handle any action
- * that needs to be taken when the system becomes idle.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu).  Subsequently hacked
- * on by Tom Rini, Armin Kuster, Paul Mackerras and others.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/sysctl.h>
-#include <linux/cpu.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/cputable.h>
-#include <asm/machdep.h>
-#include <asm/smp.h>
-
-void default_idle(void)
-{
-	void (*powersave)(void);
-
-	powersave = ppc_md.power_save;
-
-	if (!need_resched()) {
-		if (powersave != NULL)
-			powersave();
-#ifdef CONFIG_SMP
-		else {
-			set_thread_flag(TIF_POLLING_NRFLAG);
-			while (!need_resched() &&
-					!cpu_is_offline(smp_processor_id()))
-				barrier();
-			clear_thread_flag(TIF_POLLING_NRFLAG);
-		}
-#endif
-	}
-}
-
-/*
- * The body of the idle task.
- */
-void cpu_idle(void)
-{
-	int cpu = smp_processor_id();
-
-	for (;;) {
-		while (!need_resched()) {
-			if (ppc_md.idle != NULL)
-				ppc_md.idle();
-			else
-				default_idle();
-		}
-
-		if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING)
-			cpu_die();
-		preempt_enable_no_resched();
-		schedule();
-		preempt_disable();
-	}
-}
-
-#if defined(CONFIG_SYSCTL) && defined(CONFIG_6xx)
-/*
- * Register the sysctl to set/clear powersave_nap.
- */
-extern int powersave_nap;
-
-static ctl_table powersave_nap_ctl_table[]={
-	{
-		.ctl_name	= KERN_PPC_POWERSAVE_NAP,
-		.procname	= "powersave-nap",
-		.data		= &powersave_nap,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
-	},
-	{ 0, },
-};
-static ctl_table powersave_nap_sysctl_root[] = {
-	{ 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, },
- 	{ 0,},
-};
-
-static int __init
-register_powersave_nap_sysctl(void)
-{
-	register_sysctl_table(powersave_nap_sysctl_root, 0);
-
-	return 0;
-}
-
-__initcall(register_powersave_nap_sysctl);
-#endif
diff --git a/arch/ppc/kernel/idle_6xx.S b/arch/ppc/kernel/idle_6xx.S
deleted file mode 100644
index 1a2194c..0000000
--- a/arch/ppc/kernel/idle_6xx.S
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- *  This file contains the power_save function for 6xx & 7xxx CPUs
- *  rewritten in assembler
- *
- *  Warning ! This code assumes that if your machine has a 750fx
- *  it will have PLL 1 set to low speed mode (used during NAP/DOZE).
- *  if this is not the case some additional changes will have to
- *  be done to check a runtime var (a bit like powersave-nap)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-#undef DEBUG
-
-	.text
-
-/*
- * Init idle, called at early CPU setup time from head.S for each CPU
- * Make sure no rest of NAP mode remains in HID0, save default
- * values for some CPU specific registers. Called with r24
- * containing CPU number and r3 reloc offset
- */
-_GLOBAL(init_idle_6xx)
-BEGIN_FTR_SECTION
-	mfspr	r4,SPRN_HID0
-	rlwinm	r4,r4,0,10,8	/* Clear NAP */
-	mtspr	SPRN_HID0, r4
-	b	1f
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
-	blr
-1:
-	slwi	r5,r24,2
-	add	r5,r5,r3
-BEGIN_FTR_SECTION
-	mfspr	r4,SPRN_MSSCR0
-	addis	r6,r5, nap_save_msscr0@ha
-	stw	r4,nap_save_msscr0@l(r6)
-END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
-BEGIN_FTR_SECTION
-	mfspr	r4,SPRN_HID1
-	addis	r6,r5,nap_save_hid1@ha
-	stw	r4,nap_save_hid1@l(r6)
-END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
-	blr
-
-/*
- * Here is the power_save_6xx function. This could eventually be
- * split into several functions & changing the function pointer
- * depending on the various features.
- */
-_GLOBAL(ppc6xx_idle)
-	/* Check if we can nap or doze, put HID0 mask in r3
-	 */
-	lis	r3, 0
-BEGIN_FTR_SECTION
-	lis	r3,HID0_DOZE@h
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
-BEGIN_FTR_SECTION
-	/* We must dynamically check for the NAP feature as it
-	 * can be cleared by CPU init after the fixups are done
-	 */
-	lis	r4,cur_cpu_spec@ha
-	lwz	r4,cur_cpu_spec@l(r4)
-	lwz	r4,CPU_SPEC_FEATURES(r4)
-	andi.	r0,r4,CPU_FTR_CAN_NAP
-	beq	1f
-	/* Now check if user or arch enabled NAP mode */
-	lis	r4,powersave_nap@ha
-	lwz	r4,powersave_nap@l(r4)
-	cmpwi	0,r4,0
-	beq	1f
-	lis	r3,HID0_NAP@h
-1:	
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
-	cmpwi	0,r3,0
-	beqlr
-
-	/* Clear MSR:EE */
-	mfmsr	r7
-	rlwinm	r0,r7,0,17,15
-	mtmsr	r0
-
-	/* Check current_thread_info()->flags */
-	rlwinm	r4,r1,0,0,18
-	lwz	r4,TI_FLAGS(r4)
-	andi.	r0,r4,_TIF_NEED_RESCHED
-	beq	1f
-	mtmsr	r7	/* out of line this ? */
-	blr
-1:	
-	/* Some pre-nap cleanups needed on some CPUs */
-	andis.	r0,r3,HID0_NAP@h
-	beq	2f
-BEGIN_FTR_SECTION
-	/* Disable L2 prefetch on some 745x and try to ensure
-	 * L2 prefetch engines are idle. As explained by errata
-	 * text, we can't be sure they are, we just hope very hard
-	 * that well be enough (sic !). At least I noticed Apple
-	 * doesn't even bother doing the dcbf's here...
-	 */
-	mfspr	r4,SPRN_MSSCR0
-	rlwinm	r4,r4,0,0,29
-	sync
-	mtspr	SPRN_MSSCR0,r4
-	sync
-	isync
-	lis	r4,KERNELBASE@h
-	dcbf	0,r4
-	dcbf	0,r4
-	dcbf	0,r4
-	dcbf	0,r4
-END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
-#ifdef DEBUG
-	lis	r6,nap_enter_count@ha
-	lwz	r4,nap_enter_count@l(r6)
-	addi	r4,r4,1
-	stw	r4,nap_enter_count@l(r6)
-#endif	
-2:
-BEGIN_FTR_SECTION
-	/* Go to low speed mode on some 750FX */
-	lis	r4,powersave_lowspeed@ha
-	lwz	r4,powersave_lowspeed@l(r4)
-	cmpwi	0,r4,0
-	beq	1f
-	mfspr	r4,SPRN_HID1
-	oris	r4,r4,0x0001
-	mtspr	SPRN_HID1,r4
-1:	
-END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
-
-	/* Go to NAP or DOZE now */	
-	mfspr	r4,SPRN_HID0
-	lis	r5,(HID0_NAP|HID0_SLEEP)@h
-BEGIN_FTR_SECTION
-	oris	r5,r5,HID0_DOZE@h
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
-	andc	r4,r4,r5
-	or	r4,r4,r3
-BEGIN_FTR_SECTION
-	oris	r4,r4,HID0_DPM@h	/* that should be done once for all  */
-END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
-	mtspr	SPRN_HID0,r4
-BEGIN_FTR_SECTION
-	DSSALL
-	sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-	ori	r7,r7,MSR_EE /* Could be ommited (already set) */
-	oris	r7,r7,MSR_POW@h
-	sync
-	isync
-	mtmsr	r7
-	isync
-	sync
-	blr
-	
-/*
- * Return from NAP/DOZE mode, restore some CPU specific registers,
- * we are called with DR/IR still off and r2 containing physical
- * address of current.
- */
-_GLOBAL(power_save_6xx_restore)
-	mfspr	r11,SPRN_HID0
-	rlwinm.	r11,r11,0,10,8	/* Clear NAP & copy NAP bit !state to cr1 EQ */
-	cror	4*cr1+eq,4*cr0+eq,4*cr0+eq
-BEGIN_FTR_SECTION
-	rlwinm	r11,r11,0,9,7	/* Clear DOZE */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
-	mtspr	SPRN_HID0, r11
-
-#ifdef DEBUG
-	beq	cr1,1f
-	lis	r11,(nap_return_count-KERNELBASE)@ha
-	lwz	r9,nap_return_count@l(r11)
-	addi	r9,r9,1
-	stw	r9,nap_return_count@l(r11)
-1:
-#endif
-	
-	rlwinm	r9,r1,0,0,18
-	tophys(r9,r9)
-	lwz	r11,TI_CPU(r9)
-	slwi	r11,r11,2
-	/* Todo make sure all these are in the same page
-	 * and load r22 (@ha part + CPU offset) only once
-	 */
-BEGIN_FTR_SECTION
-	beq	cr1,1f
-	addis	r9,r11,(nap_save_msscr0-KERNELBASE)@ha
-	lwz	r9,nap_save_msscr0@l(r9)
-	mtspr	SPRN_MSSCR0, r9
-	sync
-	isync
-1:
-END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
-BEGIN_FTR_SECTION
-	addis	r9,r11,(nap_save_hid1-KERNELBASE)@ha
-	lwz	r9,nap_save_hid1@l(r9)
-	mtspr	SPRN_HID1, r9
-END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
-	b	transfer_to_handler_cont
-
-	.data
-
-_GLOBAL(nap_save_msscr0)
-	.space	4*NR_CPUS
-
-_GLOBAL(nap_save_hid1)
-	.space	4*NR_CPUS
-
-_GLOBAL(powersave_nap)
-	.long	0
-_GLOBAL(powersave_lowspeed)
-	.long	0
-
-#ifdef DEBUG
-_GLOBAL(nap_enter_count)
-	.space	4
-_GLOBAL(nap_return_count)
-	.space	4
-#endif
diff --git a/arch/ppc/kernel/idle_power4.S b/arch/ppc/kernel/idle_power4.S
deleted file mode 100644
index cc0d535..0000000
--- a/arch/ppc/kernel/idle_power4.S
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  This file contains the power_save function for 6xx & 7xxx CPUs
- *  rewritten in assembler
- *
- *  Warning ! This code assumes that if your machine has a 750fx
- *  it will have PLL 1 set to low speed mode (used during NAP/DOZE).
- *  if this is not the case some additional changes will have to
- *  be done to check a runtime var (a bit like powersave-nap)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-#undef DEBUG
-
-	.text
-
-/*
- * Init idle, called at early CPU setup time from head.S for each CPU
- * So nothing for now. Called with r24 containing CPU number and r3
- * reloc offset
- */
- 	.globl	init_idle_power4
-init_idle_power4:
-	blr
-
-/*
- * Here is the power_save_6xx function. This could eventually be
- * split into several functions & changing the function pointer
- * depending on the various features.
- */
-	.globl	power4_idle
-power4_idle:
-BEGIN_FTR_SECTION
-	blr
-END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP)
-	/* We must dynamically check for the NAP feature as it
-	 * can be cleared by CPU init after the fixups are done
-	 */
-	lis	r4,cur_cpu_spec@ha
-	lwz	r4,cur_cpu_spec@l(r4)
-	lwz	r4,CPU_SPEC_FEATURES(r4)
-	andi.	r0,r4,CPU_FTR_CAN_NAP
-	beqlr
-	/* Now check if user or arch enabled NAP mode */
-	lis	r4,powersave_nap@ha
-	lwz	r4,powersave_nap@l(r4)
-	cmpwi	0,r4,0
-	beqlr
-
-	/* Clear MSR:EE */
-	mfmsr	r7
-	rlwinm	r0,r7,0,17,15
-	mtmsr	r0
-
-	/* Check current_thread_info()->flags */
-	rlwinm	r4,r1,0,0,18
-	lwz	r4,TI_FLAGS(r4)
-	andi.	r0,r4,_TIF_NEED_RESCHED
-	beq	1f
-	mtmsr	r7	/* out of line this ? */
-	blr
-1:	
-	/* Go to NAP now */	
-BEGIN_FTR_SECTION
-	DSSALL
-	sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-	ori	r7,r7,MSR_EE /* Could be ommited (already set) */
-	oris	r7,r7,MSR_POW@h
-	sync
-	isync
-	mtmsr	r7
-	isync
-	sync
-	blr
-	
-	.globl powersave_nap
-powersave_nap:
-	.long	0
diff --git a/arch/ppc/kernel/l2cr.S b/arch/ppc/kernel/l2cr.S
deleted file mode 100644
index d7f4e98..0000000
--- a/arch/ppc/kernel/l2cr.S
+++ /dev/null
@@ -1,471 +0,0 @@
-/*
-	L2CR functions
-	Copyright © 1997-1998 by PowerLogix R & D, Inc.
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-/*
-	Thur, Dec. 12, 1998.
-	- First public release, contributed by PowerLogix.
-	***********
-	Sat, Aug. 7, 1999.
-	- Terry: Made sure code disabled interrupts before running. (Previously
-			it was assumed interrupts were already disabled).
-	- Terry: Updated for tentative G4 support.  4MB of memory is now flushed
-			instead of 2MB.  (Prob. only 3 is necessary).
-	- Terry: Updated for workaround to HID0[DPM] processor bug
-			during global invalidates.
-	***********
-	Thu, July 13, 2000.
-	- Terry: Added isync to correct for an errata.
-
-	22 August 2001.
-	- DanM: Finally added the 7450 patch I've had for the past
-		several months.  The L2CR is similar, but I'm going
-		to assume the user of this functions knows what they
-		are doing.
-
-	Author:	Terry Greeniaus (tgree@phys.ualberta.ca)
-	Please e-mail updates to this file to me, thanks!
-*/
-#include <linux/config.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/ppc_asm.h>
-#include <asm/cache.h>
-#include <asm/page.h>
-
-/* Usage:
-
-	When setting the L2CR register, you must do a few special
-	things.  If you are enabling the cache, you must perform a
-	global invalidate.  If you are disabling the cache, you must
-	flush the cache contents first.  This routine takes care of
-	doing these things.  When first enabling the cache, make sure
-	you pass in the L2CR you want, as well as passing in the
-	global invalidate bit set.  A global invalidate will only be
-	performed if the L2I bit is set in applyThis.  When enabling
-	the cache, you should also set the L2E bit in applyThis.  If
-	you want to modify the L2CR contents after the cache has been
-	enabled, the recommended procedure is to first call
-	__setL2CR(0) to disable the cache and then call it again with
-	the new values for L2CR.  Examples:
-
-	_setL2CR(0)		- disables the cache
-	_setL2CR(0xB3A04000)	- enables my G3 upgrade card:
-				- L2E set to turn on the cache
-				- L2SIZ set to 1MB
-				- L2CLK set to 1:1
-				- L2RAM set to pipelined synchronous late-write
-				- L2I set to perform a global invalidation
-				- L2OH set to 0.5 nS
-				- L2DF set because this upgrade card
-				  requires it
-
-	A similar call should work for your card.  You need to know
-	the correct setting for your card and then place them in the
-	fields I have outlined above.  Other fields support optional
-	features, such as L2DO which caches only data, or L2TS which
-	causes cache pushes from the L1 cache to go to the L2 cache
-	instead of to main memory.
-
-IMPORTANT:
-	Starting with the 7450, the bits in this register have moved
-	or behave differently.  The Enable, Parity Enable, Size,
-	and L2 Invalidate are the only bits that have not moved.
-	The size is read-only for these processors with internal L2
-	cache, and the invalidate is a control as well as status.
-		-- Dan
-
-*/
-/*
- * Summary: this procedure ignores the L2I bit in the value passed in,
- * flushes the cache if it was already enabled, always invalidates the
- * cache, then enables the cache if the L2E bit is set in the value
- * passed in.
- *   -- paulus.
- */
-_GLOBAL(_set_L2CR)
-	/* Make sure this is a 750 or 7400 chip */
-BEGIN_FTR_SECTION
-	li	r3,-1
-	blr
-END_FTR_SECTION_IFCLR(CPU_FTR_L2CR)
-
-	mflr	r9
-
-	/* Stop DST streams */
-BEGIN_FTR_SECTION
-	DSSALL
-	sync
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-
-	/* Turn off interrupts and data relocation. */
-	mfmsr	r7		/* Save MSR in r7 */
-	rlwinm	r4,r7,0,17,15
-	rlwinm	r4,r4,0,28,26	/* Turn off DR bit */
-	sync
-	mtmsr	r4
-	isync
-
-	/* Before we perform the global invalidation, we must disable dynamic
-	 * power management via HID0[DPM] to work around a processor bug where
-	 * DPM can possibly interfere with the state machine in the processor
-	 * that invalidates the L2 cache tags.
-	 */
-	mfspr	r8,SPRN_HID0		/* Save HID0 in r8 */
-	rlwinm	r4,r8,0,12,10		/* Turn off HID0[DPM] */
-	sync
-	mtspr	SPRN_HID0,r4		/* Disable DPM */
-	sync
-
-	/* Get the current enable bit of the L2CR into r4 */
-	mfspr	r4,SPRN_L2CR
-
-	/* Tweak some bits */
-	rlwinm	r5,r3,0,0,0		/* r5 contains the new enable bit */
-	rlwinm	r3,r3,0,11,9		/* Turn off the invalidate bit */
-	rlwinm	r3,r3,0,1,31		/* Turn off the enable bit */
-
-	/* Check to see if we need to flush */
-	rlwinm.	r4,r4,0,0,0
-	beq	2f
-
-	/* Flush the cache. First, read the first 4MB of memory (physical) to
-	 * put new data in the cache.  (Actually we only need
-	 * the size of the L2 cache plus the size of the L1 cache, but 4MB will
-	 * cover everything just to be safe).
-	 */
-
-	 /**** Might be a good idea to set L2DO here - to prevent instructions
-	       from getting into the cache.  But since we invalidate
-	       the next time we enable the cache it doesn't really matter.
-	       Don't do this unless you accomodate all processor variations.
-	       The bit moved on the 7450.....
-	  ****/
-
-BEGIN_FTR_SECTION
-	/* Disable L2 prefetch on some 745x and try to ensure
-	 * L2 prefetch engines are idle. As explained by errata
-	 * text, we can't be sure they are, we just hope very hard
-	 * that well be enough (sic !). At least I noticed Apple
-	 * doesn't even bother doing the dcbf's here...
-	 */
-	mfspr	r4,SPRN_MSSCR0
-	rlwinm	r4,r4,0,0,29
-	sync
-	mtspr	SPRN_MSSCR0,r4
-	sync
-	isync
-	lis	r4,KERNELBASE@h
-	dcbf	0,r4
-	dcbf	0,r4
-	dcbf	0,r4
-	dcbf	0,r4
-END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
-
-	/* TODO: use HW flush assist when available */
-
-	lis	r4,0x0002
-	mtctr	r4
-	li	r4,0
-1:
-	lwzx	r0,r0,r4
-	addi	r4,r4,32		/* Go to start of next cache line */
-	bdnz	1b
-	isync
-
-	/* Now, flush the first 4MB of memory */
-	lis	r4,0x0002
-	mtctr	r4
-	li	r4,0
-	sync
-1:
-	dcbf	0,r4
-	addi	r4,r4,32		/* Go to start of next cache line */
-	bdnz	1b
-
-2:
-	/* Set up the L2CR configuration bits (and switch L2 off) */
-	/* CPU errata: Make sure the mtspr below is already in the
-	 * L1 icache
-	 */
-	b	20f
-	.balign	L1_CACHE_BYTES
-22:
-	sync
-	mtspr	SPRN_L2CR,r3
-	sync
-	b	23f
-20:
-	b	21f
-21:	sync
-	isync
-	b	22b
-
-23:
-	/* Perform a global invalidation */
-	oris	r3,r3,0x0020
-	sync
-	mtspr	SPRN_L2CR,r3
-	sync
-	isync				/* For errata */
-
-BEGIN_FTR_SECTION
-	/* On the 7450, we wait for the L2I bit to clear......
-	*/
-10:	mfspr	r3,SPRN_L2CR
-	andis.	r4,r3,0x0020
-	bne	10b
-	b	11f
-END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
-
-	/* Wait for the invalidation to complete */
-3:	mfspr	r3,SPRN_L2CR
-	rlwinm.	r4,r3,0,31,31
-	bne	3b
-
-11:	rlwinm	r3,r3,0,11,9		/* Turn off the L2I bit */
-	sync
-	mtspr	SPRN_L2CR,r3
-	sync
-
-	/* See if we need to enable the cache */
-	cmplwi	r5,0
-	beq	4f
-
-	/* Enable the cache */
-	oris	r3,r3,0x8000
-	mtspr	SPRN_L2CR,r3
-	sync
-	
-	/* Enable L2 HW prefetch on 744x/745x */
-BEGIN_FTR_SECTION
-	mfspr	r3,SPRN_MSSCR0
-	ori	r3,r3,3
-	sync
-	mtspr	SPRN_MSSCR0,r3
-	sync
-	isync
-END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
-4:
-
-	/* Restore HID0[DPM] to whatever it was before */
-	sync
-	mtspr	1008,r8
-	sync
-
-	/* Restore MSR (restores EE and DR bits to original state) */
-	SYNC
-	mtmsr	r7
-	isync
-
-	mtlr	r9
-	blr
-
-_GLOBAL(_get_L2CR)
-	/* Return the L2CR contents */
-	li	r3,0
-BEGIN_FTR_SECTION
-	mfspr	r3,SPRN_L2CR
-END_FTR_SECTION_IFSET(CPU_FTR_L2CR)
-	blr
-
-
-/*
- * Here is a similar routine for dealing with the L3 cache
- * on the 745x family of chips
- */
-
-_GLOBAL(_set_L3CR)
-	/* Make sure this is a 745x chip */
-BEGIN_FTR_SECTION
-	li	r3,-1
-	blr
-END_FTR_SECTION_IFCLR(CPU_FTR_L3CR)
-
-	/* Turn off interrupts and data relocation. */
-	mfmsr	r7		/* Save MSR in r7 */
-	rlwinm	r4,r7,0,17,15
-	rlwinm	r4,r4,0,28,26	/* Turn off DR bit */
-	sync
-	mtmsr	r4
-	isync
-
-	/* Stop DST streams */
-	DSSALL
-	sync
-
-	/* Get the current enable bit of the L3CR into r4 */
-	mfspr	r4,SPRN_L3CR
-
-	/* Tweak some bits */
-	rlwinm	r5,r3,0,0,0		/* r5 contains the new enable bit */
-	rlwinm	r3,r3,0,22,20		/* Turn off the invalidate bit */
-	rlwinm	r3,r3,0,2,31		/* Turn off the enable & PE bits */
-	rlwinm	r3,r3,0,5,3		/* Turn off the clken bit */
-	/* Check to see if we need to flush */
-	rlwinm.	r4,r4,0,0,0
-	beq	2f
-
-	/* Flush the cache.
-	 */
-
-	/* TODO: use HW flush assist */
-
-	lis	r4,0x0008
-	mtctr	r4
-	li	r4,0
-1:
-	lwzx	r0,r0,r4
-	dcbf	0,r4
-	addi	r4,r4,32		/* Go to start of next cache line */
-	bdnz	1b
-
-2:
-	/* Set up the L3CR configuration bits (and switch L3 off) */
-	sync
-	mtspr	SPRN_L3CR,r3
-	sync
-
-	oris	r3,r3,L3CR_L3RES@h		/* Set reserved bit 5 */
-	mtspr	SPRN_L3CR,r3
-	sync
-	oris	r3,r3,L3CR_L3CLKEN@h		/* Set clken */
-	mtspr	SPRN_L3CR,r3
-	sync
-
-	/* Wait for stabilize */
-	li	r0,256
-	mtctr	r0
-1:	bdnz	1b
-
-	/* Perform a global invalidation */
-	ori	r3,r3,0x0400
-	sync
-	mtspr	SPRN_L3CR,r3
-	sync
-	isync
-
-	/* We wait for the L3I bit to clear...... */
-10:	mfspr	r3,SPRN_L3CR
-	andi.	r4,r3,0x0400
-	bne	10b
-
-	/* Clear CLKEN */
-	rlwinm	r3,r3,0,5,3		/* Turn off the clken bit */
-	mtspr	SPRN_L3CR,r3
-	sync
-
-	/* Wait for stabilize */
-	li	r0,256
-	mtctr	r0
-1:	bdnz	1b
-
-	/* See if we need to enable the cache */
-	cmplwi	r5,0
-	beq	4f
-
-	/* Enable the cache */
-	oris	r3,r3,(L3CR_L3E | L3CR_L3CLKEN)@h
-	mtspr	SPRN_L3CR,r3
-	sync
-
-	/* Wait for stabilize */
-	li	r0,256
-	mtctr	r0
-1:	bdnz	1b
-
-	/* Restore MSR (restores EE and DR bits to original state) */
-4:	SYNC
-	mtmsr	r7
-	isync
-	blr
-
-_GLOBAL(_get_L3CR)
-	/* Return the L3CR contents */
-	li	r3,0
-BEGIN_FTR_SECTION
-	mfspr	r3,SPRN_L3CR
-END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
-	blr
-
-/* --- End of PowerLogix code ---
- */
-
-
-/* flush_disable_L1()	- Flush and disable L1 cache
- *
- * clobbers r0, r3, ctr, cr0
- * Must be called with interrupts disabled and MMU enabled.
- */
-_GLOBAL(__flush_disable_L1)
-	/* Stop pending alitvec streams and memory accesses */
-BEGIN_FTR_SECTION
-	DSSALL
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- 	sync
-
-	/* Load counter to 0x4000 cache lines (512k) and
-	 * load cache with datas
-	 */
-	li	r3,0x4000	/* 512kB / 32B */
-	mtctr	r3
-	lis	r3,KERNELBASE@h
-1:
-	lwz	r0,0(r3)
-	addi	r3,r3,0x0020	/* Go to start of next cache line */
-	bdnz	1b
-	isync
-	sync
-
-	/* Now flush those cache lines */
-	li	r3,0x4000	/* 512kB / 32B */
-	mtctr	r3
-	lis	r3,KERNELBASE@h
-1:
-	dcbf	0,r3
-	addi	r3,r3,0x0020	/* Go to start of next cache line */
-	bdnz	1b
-	sync
-
-	/* We can now disable the L1 cache (HID0:DCE, HID0:ICE) */
-	mfspr	r3,SPRN_HID0
-	rlwinm	r3,r3,0,18,15
-	mtspr	SPRN_HID0,r3
-	sync
-	isync
- 	blr
-
-/* inval_enable_L1	- Invalidate and enable L1 cache
- *
- * Assumes L1 is already disabled and MSR:EE is off
- *
- * clobbers r3
- */
-_GLOBAL(__inval_enable_L1)
-	/* Enable and then Flash inval the instruction & data cache */
-	mfspr	r3,SPRN_HID0
-	ori	r3,r3, HID0_ICE|HID0_ICFI|HID0_DCE|HID0_DCI
-	sync
-	isync
-	mtspr	SPRN_HID0,r3
-	xori	r3,r3, HID0_ICFI|HID0_DCI
-	mtspr	SPRN_HID0,r3
-	sync
-
- 	blr
-
-
diff --git a/arch/ppc/kernel/module.c b/arch/ppc/kernel/module.c
deleted file mode 100644
index 92f4e5f..0000000
--- a/arch/ppc/kernel/module.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*  Kernel module help for PPC.
-    Copyright (C) 2001 Rusty Russell.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-#include <linux/module.h>
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/cache.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt , ...)
-#endif
-
-LIST_HEAD(module_bug_list);
-
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc(size);
-}
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
-/* Count how many different relocations (different symbol, different
-   addend) */
-static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
-{
-	unsigned int i, j, ret = 0;
-
-	/* Sure, this is order(n^2), but it's usually short, and not
-           time critical */
-	for (i = 0; i < num; i++) {
-		for (j = 0; j < i; j++) {
-			/* If this addend appeared before, it's
-                           already been counted */
-			if (ELF32_R_SYM(rela[i].r_info)
-			    == ELF32_R_SYM(rela[j].r_info)
-			    && rela[i].r_addend == rela[j].r_addend)
-				break;
-		}
-		if (j == i) ret++;
-	}
-	return ret;
-}
-
-/* Get the potential trampolines size required of the init and
-   non-init sections */
-static unsigned long get_plt_size(const Elf32_Ehdr *hdr,
-				  const Elf32_Shdr *sechdrs,
-				  const char *secstrings,
-				  int is_init)
-{
-	unsigned long ret = 0;
-	unsigned i;
-
-	/* Everything marked ALLOC (this includes the exported
-           symbols) */
-	for (i = 1; i < hdr->e_shnum; i++) {
-		/* If it's called *.init*, and we're not init, we're
-                   not interested */
-		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-		    != is_init)
-			continue;
-
-		/* We don't want to look at debug sections. */
-		if (strstr(secstrings + sechdrs[i].sh_name, ".debug") != 0)
-			continue;
-
-		if (sechdrs[i].sh_type == SHT_RELA) {
-			DEBUGP("Found relocations in section %u\n", i);
-			DEBUGP("Ptr: %p.  Number: %u\n",
-			       (void *)hdr + sechdrs[i].sh_offset,
-			       sechdrs[i].sh_size / sizeof(Elf32_Rela));
-			ret += count_relocs((void *)hdr
-					     + sechdrs[i].sh_offset,
-					     sechdrs[i].sh_size
-					     / sizeof(Elf32_Rela))
-				* sizeof(struct ppc_plt_entry);
-		}
-	}
-
-	return ret;
-}
-
-int module_frob_arch_sections(Elf32_Ehdr *hdr,
-			      Elf32_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *me)
-{
-	unsigned int i;
-
-	/* Find .plt and .init.plt sections */
-	for (i = 0; i < hdr->e_shnum; i++) {
-		if (strcmp(secstrings + sechdrs[i].sh_name, ".init.plt") == 0)
-			me->arch.init_plt_section = i;
-		else if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0)
-			me->arch.core_plt_section = i;
-	}
-	if (!me->arch.core_plt_section || !me->arch.init_plt_section) {
-		printk("Module doesn't contain .plt or .init.plt sections.\n");
-		return -ENOEXEC;
-	}
-
-	/* Override their sizes */
-	sechdrs[me->arch.core_plt_section].sh_size
-		= get_plt_size(hdr, sechdrs, secstrings, 0);
-	sechdrs[me->arch.init_plt_section].sh_size
-		= get_plt_size(hdr, sechdrs, secstrings, 1);
-	return 0;
-}
-
-int apply_relocate(Elf32_Shdr *sechdrs,
-		   const char *strtab,
-		   unsigned int symindex,
-		   unsigned int relsec,
-		   struct module *module)
-{
-	printk(KERN_ERR "%s: Non-ADD RELOCATION unsupported\n",
-	       module->name);
-	return -ENOEXEC;
-}
-
-static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val)
-{
-	if (entry->jump[0] == 0x3d600000 + ((val + 0x8000) >> 16)
-	    && entry->jump[1] == 0x396b0000 + (val & 0xffff))
-		return 1;
-	return 0;
-}
-
-/* Set up a trampoline in the PLT to bounce us to the distant function */
-static uint32_t do_plt_call(void *location,
-			    Elf32_Addr val,
-			    Elf32_Shdr *sechdrs,
-			    struct module *mod)
-{
-	struct ppc_plt_entry *entry;
-
-	DEBUGP("Doing plt for call to 0x%x at 0x%x\n", val, (unsigned int)location);
-	/* Init, or core PLT? */
-	if (location >= mod->module_core
-	    && location < mod->module_core + mod->core_size)
-		entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr;
-	else
-		entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr;
-
-	/* Find this entry, or if that fails, the next avail. entry */
-	while (entry->jump[0]) {
-		if (entry_matches(entry, val)) return (uint32_t)entry;
-		entry++;
-	}
-
-	/* Stolen from Paul Mackerras as well... */
-	entry->jump[0] = 0x3d600000+((val+0x8000)>>16);	/* lis r11,sym@ha */
-	entry->jump[1] = 0x396b0000 + (val&0xffff);	/* addi r11,r11,sym@l*/
-	entry->jump[2] = 0x7d6903a6;			/* mtctr r11 */
-	entry->jump[3] = 0x4e800420;			/* bctr */
-
-	DEBUGP("Initialized plt for 0x%x at %p\n", val, entry);
-	return (uint32_t)entry;
-}
-
-int apply_relocate_add(Elf32_Shdr *sechdrs,
-		       const char *strtab,
-		       unsigned int symindex,
-		       unsigned int relsec,
-		       struct module *module)
-{
-	unsigned int i;
-	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
-	Elf32_Sym *sym;
-	uint32_t *location;
-	uint32_t value;
-
-	DEBUGP("Applying ADD relocate section %u to %u\n", relsec,
-	       sechdrs[relsec].sh_info);
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
-		/* This is where to make the change */
-		location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			+ rela[i].r_offset;
-		/* This is the symbol it is referring to.  Note that all
-		   undefined symbols have been resolved.  */
-		sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
-			+ ELF32_R_SYM(rela[i].r_info);
-		/* `Everything is relative'. */
-		value = sym->st_value + rela[i].r_addend;
-
-		switch (ELF32_R_TYPE(rela[i].r_info)) {
-		case R_PPC_ADDR32:
-			/* Simply set it */
-			*(uint32_t *)location = value;
-			break;
-
-		case R_PPC_ADDR16_LO:
-			/* Low half of the symbol */
-			*(uint16_t *)location = value;
-			break;
-		
-		case R_PPC_ADDR16_HA:
-			/* Sign-adjusted lower 16 bits: PPC ELF ABI says:
-			   (((x >> 16) + ((x & 0x8000) ? 1 : 0))) & 0xFFFF.
-			   This is the same, only sane.
-			 */
-			*(uint16_t *)location = (value + 0x8000) >> 16;
-			break;
-
-		case R_PPC_REL24:
-			if ((int)(value - (uint32_t)location) < -0x02000000
-			    || (int)(value - (uint32_t)location) >= 0x02000000)
-				value = do_plt_call(location, value,
-						    sechdrs, module);
-
-			/* Only replace bits 2 through 26 */
-			DEBUGP("REL24 value = %08X. location = %08X\n",
-			       value, (uint32_t)location);
-			DEBUGP("Location before: %08X.\n",
-			       *(uint32_t *)location);
-			*(uint32_t *)location
-				= (*(uint32_t *)location & ~0x03fffffc)
-				| ((value - (uint32_t)location)
-				   & 0x03fffffc);
-			DEBUGP("Location after: %08X.\n",
-			       *(uint32_t *)location);
-			DEBUGP("ie. jump to %08X+%08X = %08X\n",
-			       *(uint32_t *)location & 0x03fffffc,
-			       (uint32_t)location,
-			       (*(uint32_t *)location & 0x03fffffc)
-			       + (uint32_t)location);
-			break;
-
-		case R_PPC_REL32:
-			/* 32-bit relative jump. */
-			*(uint32_t *)location = value - (uint32_t)location;
-			break;
-
-		default:
-			printk("%s: unknown ADD relocation: %u\n",
-			       module->name,
-			       ELF32_R_TYPE(rela[i].r_info));
-			return -ENOEXEC;
-		}
-	}
-	return 0;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
-		    const Elf_Shdr *sechdrs,
-		    struct module *me)
-{
-	char *secstrings;
-	unsigned int i;
-
-	me->arch.bug_table = NULL;
-	me->arch.num_bugs = 0;
-
-	/* Find the __bug_table section, if present */
-	secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-	for (i = 1; i < hdr->e_shnum; i++) {
-		if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table"))
-			continue;
-		me->arch.bug_table = (void *) sechdrs[i].sh_addr;
-		me->arch.num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry);
-		break;
-	}
-
-	/*
-	 * Strictly speaking this should have a spinlock to protect against
-	 * traversals, but since we only traverse on BUG()s, a spinlock
-	 * could potentially lead to deadlock and thus be counter-productive.
-	 */
-	list_add(&me->arch.bug_list, &module_bug_list);
-
-	return 0;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-	list_del(&mod->arch.bug_list);
-}
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
-	struct mod_arch_specific *mod;
-	unsigned int i;
-	struct bug_entry *bug;
-
-	list_for_each_entry(mod, &module_bug_list, bug_list) {
-		bug = mod->bug_table;
-		for (i = 0; i < mod->num_bugs; ++i, ++bug)
-			if (bugaddr == bug->bug_addr)
-				return bug;
-	}
-	return NULL;
-}
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 04d04c5..809673a 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -46,9 +46,6 @@ static void pcibios_fixup_resources(struct pci_dev* dev);
 static void fixup_broken_pcnet32(struct pci_dev* dev);
 static int reparent_resources(struct resource *parent, struct resource *res);
 static void fixup_cpc710_pci64(struct pci_dev* dev);
-#ifdef CONFIG_PPC_OF
-static u8* pci_to_OF_bus_map;
-#endif
 
 /* By default, we don't re-assign bus numbers.
  */
@@ -625,406 +622,13 @@ pcibios_alloc_controller(void)
 	return hose;
 }
 
-#ifdef CONFIG_PPC_OF
-/*
- * Functions below are used on OpenFirmware machines.
- */
-static void
-make_one_node_map(struct device_node* node, u8 pci_bus)
-{
-	int *bus_range;
-	int len;
-
-	if (pci_bus >= pci_bus_count)
-		return;
-	bus_range = (int *) get_property(node, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int)) {
-		printk(KERN_WARNING "Can't get bus-range for %s, "
-		       "assuming it starts at 0\n", node->full_name);
-		pci_to_OF_bus_map[pci_bus] = 0;
-	} else
-		pci_to_OF_bus_map[pci_bus] = bus_range[0];
-
-	for (node=node->child; node != 0;node = node->sibling) {
-		struct pci_dev* dev;
-		unsigned int *class_code, *reg;
-	
-		class_code = (unsigned int *) get_property(node, "class-code", NULL);
-		if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
-			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
-			continue;
-		reg = (unsigned int *)get_property(node, "reg", NULL);
-		if (!reg)
-			continue;
-		dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff));
-		if (!dev || !dev->subordinate)
-			continue;
-		make_one_node_map(node, dev->subordinate->number);
-	}
-}
-	
-void
-pcibios_make_OF_bus_map(void)
-{
-	int i;
-	struct pci_controller* hose;
-	u8* of_prop_map;
-
-	pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL);
-	if (!pci_to_OF_bus_map) {
-		printk(KERN_ERR "Can't allocate OF bus map !\n");
-		return;
-	}
-
-	/* We fill the bus map with invalid values, that helps
-	 * debugging.
-	 */
-	for (i=0; i<pci_bus_count; i++)
-		pci_to_OF_bus_map[i] = 0xff;
-
-	/* For each hose, we begin searching bridges */
-	for(hose=hose_head; hose; hose=hose->next) {
-		struct device_node* node;	
-		node = (struct device_node *)hose->arch_data;
-		if (!node)
-			continue;
-		make_one_node_map(node, hose->first_busno);
-	}
-	of_prop_map = get_property(find_path_device("/"), "pci-OF-bus-map", NULL);
-	if (of_prop_map)
-		memcpy(of_prop_map, pci_to_OF_bus_map, pci_bus_count);
-#ifdef DEBUG
-	printk("PCI->OF bus map:\n");
-	for (i=0; i<pci_bus_count; i++) {
-		if (pci_to_OF_bus_map[i] == 0xff)
-			continue;
-		printk("%d -> %d\n", i, pci_to_OF_bus_map[i]);
-	}
-#endif
-}
-
-typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data);
-
-static struct device_node*
-scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data)
-{
-	struct device_node* sub_node;
-
-	for (; node != 0;node = node->sibling) {
-		unsigned int *class_code;
-	
-		if (filter(node, data))
-			return node;
-
-		/* For PCI<->PCI bridges or CardBus bridges, we go down
-		 * Note: some OFs create a parent node "multifunc-device" as
-		 * a fake root for all functions of a multi-function device,
-		 * we go down them as well.
-		 */
-		class_code = (unsigned int *) get_property(node, "class-code", NULL);
-		if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
-			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
-			strcmp(node->name, "multifunc-device"))
-			continue;
-		sub_node = scan_OF_pci_childs(node->child, filter, data);
-		if (sub_node)
-			return sub_node;
-	}
-	return NULL;
-}
-
-static int
-scan_OF_pci_childs_iterator(struct device_node* node, void* data)
-{
-	unsigned int *reg;
-	u8* fdata = (u8*)data;
-	
-	reg = (unsigned int *) get_property(node, "reg", NULL);
-	if (reg && ((reg[0] >> 8) & 0xff) == fdata[1]
-		&& ((reg[0] >> 16) & 0xff) == fdata[0])
-		return 1;
-	return 0;
-}
-
-static struct device_node*
-scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn)
-{
-	u8 filter_data[2] = {bus, dev_fn};
-
-	return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data);
-}
-
-/*
- * Scans the OF tree for a device node matching a PCI device
- */
-struct device_node *
-pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
-{
-	struct pci_controller *hose;
-	struct device_node *node;
-	int busnr;
-
-	if (!have_of)
-		return NULL;
-	
-	/* Lookup the hose */
-	busnr = bus->number;
-	hose = pci_bus_to_hose(busnr);
-	if (!hose)
-		return NULL;
-
-	/* Check it has an OF node associated */
-	node = (struct device_node *) hose->arch_data;
-	if (!node)
-		return NULL;
-
-	/* Fixup bus number according to what OF think it is. */
-	if (pci_to_OF_bus_map)
-		busnr = pci_to_OF_bus_map[busnr];
-	if (busnr == 0xff)
-		return NULL;
-	
-	/* Now, lookup childs of the hose */
-	return scan_OF_childs_for_device(node->child, busnr, devfn);
-}
-EXPORT_SYMBOL(pci_busdev_to_OF_node);
-
-struct device_node*
-pci_device_to_OF_node(struct pci_dev *dev)
-{
-	return pci_busdev_to_OF_node(dev->bus, dev->devfn);
-}
-EXPORT_SYMBOL(pci_device_to_OF_node);
-
-/* This routine is meant to be used early during boot, when the
- * PCI bus numbers have not yet been assigned, and you need to
- * issue PCI config cycles to an OF device.
- * It could also be used to "fix" RTAS config cycles if you want
- * to set pci_assign_all_buses to 1 and still use RTAS for PCI
- * config cycles.
- */
-struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
-{
-	if (!have_of)
-		return NULL;
-	while(node) {
-		struct pci_controller* hose;
-		for (hose=hose_head;hose;hose=hose->next)
-			if (hose->arch_data == node)
-				return hose;
-		node=node->parent;
-	}
-	return NULL;
-}
-
-static int
-find_OF_pci_device_filter(struct device_node* node, void* data)
-{
-	return ((void *)node == data);
-}
-
-/*
- * Returns the PCI device matching a given OF node
- */
-int
-pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
-{
-	unsigned int *reg;
-	struct pci_controller* hose;
-	struct pci_dev* dev = NULL;
-	
-	if (!have_of)
-		return -ENODEV;
-	/* Make sure it's really a PCI device */
-	hose = pci_find_hose_for_OF_device(node);
-	if (!hose || !hose->arch_data)
-		return -ENODEV;
-	if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child,
-			find_OF_pci_device_filter, (void *)node))
-		return -ENODEV;
-	reg = (unsigned int *) get_property(node, "reg", NULL);
-	if (!reg)
-		return -ENODEV;
-	*bus = (reg[0] >> 16) & 0xff;
-	*devfn = ((reg[0] >> 8) & 0xff);
-
-	/* Ok, here we need some tweak. If we have already renumbered
-	 * all busses, we can't rely on the OF bus number any more.
-	 * the pci_to_OF_bus_map is not enough as several PCI busses
-	 * may match the same OF bus number.
-	 */
-	if (!pci_to_OF_bus_map)
-		return 0;
-
-	for_each_pci_dev(dev)
-		if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
-				dev->devfn == *devfn) {
-			*bus = dev->bus->number;
-			pci_dev_put(dev);
-			return 0;
-		}
-
-	return -ENODEV;
-}
-EXPORT_SYMBOL(pci_device_from_OF_node);
-
-void __init
-pci_process_bridge_OF_ranges(struct pci_controller *hose,
-			   struct device_node *dev, int primary)
-{
-	static unsigned int static_lc_ranges[256] __initdata;
-	unsigned int *dt_ranges, *lc_ranges, *ranges, *prev;
-	unsigned int size;
-	int rlen = 0, orig_rlen;
-	int memno = 0;
-	struct resource *res;
-	int np, na = prom_n_addr_cells(dev);
-	np = na + 5;
-
-	/* First we try to merge ranges to fix a problem with some pmacs
-	 * that can have more than 3 ranges, fortunately using contiguous
-	 * addresses -- BenH
-	 */
-	dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
-	if (!dt_ranges)
-		return;
-	/* Sanity check, though hopefully that never happens */
-	if (rlen > sizeof(static_lc_ranges)) {
-		printk(KERN_WARNING "OF ranges property too large !\n");
-		rlen = sizeof(static_lc_ranges);
-	}
-	lc_ranges = static_lc_ranges;
-	memcpy(lc_ranges, dt_ranges, rlen);
-	orig_rlen = rlen;
-
-	/* Let's work on a copy of the "ranges" property instead of damaging
-	 * the device-tree image in memory
-	 */
-	ranges = lc_ranges;
-	prev = NULL;
-	while ((rlen -= np * sizeof(unsigned int)) >= 0) {
-		if (prev) {
-			if (prev[0] == ranges[0] && prev[1] == ranges[1] &&
-				(prev[2] + prev[na+4]) == ranges[2] &&
-				(prev[na+2] + prev[na+4]) == ranges[na+2]) {
-				prev[na+4] += ranges[na+4];
-				ranges[0] = 0;
-				ranges += np;
-				continue;
-			}
-		}
-		prev = ranges;
-		ranges += np;
-	}
-
-	/*
-	 * The ranges property is laid out as an array of elements,
-	 * each of which comprises:
-	 *   cells 0 - 2:	a PCI address
-	 *   cells 3 or 3+4:	a CPU physical address
-	 *			(size depending on dev->n_addr_cells)
-	 *   cells 4+5 or 5+6:	the size of the range
-	 */
-	ranges = lc_ranges;
-	rlen = orig_rlen;
-	while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
-		res = NULL;
-		size = ranges[na+4];
-		switch ((ranges[0] >> 24) & 0x3) {
-		case 1:		/* I/O space */
-			if (ranges[2] != 0)
-				break;
-			hose->io_base_phys = ranges[na+2];
-			/* limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
-			hose->io_base_virt = ioremap(ranges[na+2], size);
-			if (primary)
-				isa_io_base = (unsigned long) hose->io_base_virt;
-			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = ranges[2];
-			DBG("PCI: IO 0x%lx -> 0x%lx\n",
-				    res->start, res->start + size - 1);
-			break;
-		case 2:		/* memory space */
-			memno = 0;
-			if (ranges[1] == 0 && ranges[2] == 0
-			    && ranges[na+4] <= (16 << 20)) {
-				/* 1st 16MB, i.e. ISA memory area */
-				if (primary)
-					isa_mem_base = ranges[na+2];
-				memno = 1;
-			}
-			while (memno < 3 && hose->mem_resources[memno].flags)
-				++memno;
-			if (memno == 0)
-				hose->pci_mem_offset = ranges[na+2] - ranges[2];
-			if (memno < 3) {
-				res = &hose->mem_resources[memno];
-				res->flags = IORESOURCE_MEM;
-				if(ranges[0] & 0x40000000)
-					res->flags |= IORESOURCE_PREFETCH;
-				res->start = ranges[na+2];
-				DBG("PCI: MEM[%d] 0x%lx -> 0x%lx\n", memno,
-					    res->start, res->start + size - 1);
-			}
-			break;
-		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
-		ranges += np;
-	}
-}
-
-/* We create the "pci-OF-bus-map" property now so it appears in the
- * /proc device tree
- */
-void __init
-pci_create_OF_bus_map(void)
-{
-	struct property* of_prop;
-	
-	of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256);
-	if (of_prop && find_path_device("/")) {
-		memset(of_prop, -1, sizeof(struct property) + 256);
-		of_prop->name = "pci-OF-bus-map";
-		of_prop->length = 256;
-		of_prop->value = (unsigned char *)&of_prop[1];
-		prom_add_property(find_path_device("/"), of_prop);
-	}
-}
-
-static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct pci_dev *pdev;
-	struct device_node *np;
-
-	pdev = to_pci_dev (dev);
-	np = pci_device_to_OF_node(pdev);
-	if (np == NULL || np->full_name == NULL)
-		return 0;
-	return sprintf(buf, "%s", np->full_name);
-}
-static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-
-#else /* CONFIG_PPC_OF */
 void pcibios_make_OF_bus_map(void)
 {
 }
-#endif /* CONFIG_PPC_OF */
 
 /* Add sysfs properties */
 void pcibios_add_platform_entries(struct pci_dev *pdev)
 {
-#ifdef CONFIG_PPC_OF
-	device_create_file(&pdev->dev, &dev_attr_devspec);
-#endif /* CONFIG_PPC_OF */
 }
 
 
diff --git a/arch/ppc/kernel/perfmon_fsl_booke.c b/arch/ppc/kernel/perfmon_fsl_booke.c
deleted file mode 100644
index 32455df..0000000
--- a/arch/ppc/kernel/perfmon_fsl_booke.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/* kernel/perfmon_fsl_booke.c
- * Freescale Book-E Performance Monitor code
- *
- * Author: Andy Fleming
- * Copyright (c) 2004 Freescale Semiconductor, Inc
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/interrupt.h>
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/prctl.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/reg.h>
-#include <asm/xmon.h>
-#include <asm/pmc.h>
-
-static inline u32 get_pmlca(int ctr);
-static inline void set_pmlca(int ctr, u32 pmlca);
-
-static inline u32 get_pmlca(int ctr)
-{
-	u32 pmlca;
-
-	switch (ctr) {
-		case 0:
-			pmlca = mfpmr(PMRN_PMLCA0);
-			break;
-		case 1:
-			pmlca = mfpmr(PMRN_PMLCA1);
-			break;
-		case 2:
-			pmlca = mfpmr(PMRN_PMLCA2);
-			break;
-		case 3:
-			pmlca = mfpmr(PMRN_PMLCA3);
-			break;
-		default:
-			panic("Bad ctr number\n");
-	}
-
-	return pmlca;
-}
-
-static inline void set_pmlca(int ctr, u32 pmlca)
-{
-	switch (ctr) {
-		case 0:
-			mtpmr(PMRN_PMLCA0, pmlca);
-			break;
-		case 1:
-			mtpmr(PMRN_PMLCA1, pmlca);
-			break;
-		case 2:
-			mtpmr(PMRN_PMLCA2, pmlca);
-			break;
-		case 3:
-			mtpmr(PMRN_PMLCA3, pmlca);
-			break;
-		default:
-			panic("Bad ctr number\n");
-	}
-}
-
-void init_pmc_stop(int ctr)
-{
-	u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU |
-			PMLCA_FCM1 | PMLCA_FCM0);
-	u32 pmlcb = 0;
-
-	switch (ctr) {
-		case 0:
-			mtpmr(PMRN_PMLCA0, pmlca);
-			mtpmr(PMRN_PMLCB0, pmlcb);
-			break;
-		case 1:
-			mtpmr(PMRN_PMLCA1, pmlca);
-			mtpmr(PMRN_PMLCB1, pmlcb);
-			break;
-		case 2:
-			mtpmr(PMRN_PMLCA2, pmlca);
-			mtpmr(PMRN_PMLCB2, pmlcb);
-			break;
-		case 3:
-			mtpmr(PMRN_PMLCA3, pmlca);
-			mtpmr(PMRN_PMLCB3, pmlcb);
-			break;
-		default:
-			panic("Bad ctr number!\n");
-	}
-}
-
-void set_pmc_event(int ctr, int event)
-{
-	u32 pmlca;
-
-	pmlca = get_pmlca(ctr);
-
-	pmlca = (pmlca & ~PMLCA_EVENT_MASK) |
-		((event << PMLCA_EVENT_SHIFT) &
-		 PMLCA_EVENT_MASK);
-
-	set_pmlca(ctr, pmlca);
-}
-
-void set_pmc_user_kernel(int ctr, int user, int kernel)
-{
-	u32 pmlca;
-
-	pmlca = get_pmlca(ctr);
-
-	if(user)
-		pmlca &= ~PMLCA_FCU;
-	else
-		pmlca |= PMLCA_FCU;
-
-	if(kernel)
-		pmlca &= ~PMLCA_FCS;
-	else
-		pmlca |= PMLCA_FCS;
-
-	set_pmlca(ctr, pmlca);
-}
-
-void set_pmc_marked(int ctr, int mark0, int mark1)
-{
-	u32 pmlca = get_pmlca(ctr);
-
-	if(mark0)
-		pmlca &= ~PMLCA_FCM0;
-	else
-		pmlca |= PMLCA_FCM0;
-
-	if(mark1)
-		pmlca &= ~PMLCA_FCM1;
-	else
-		pmlca |= PMLCA_FCM1;
-
-	set_pmlca(ctr, pmlca);
-}
-
-void pmc_start_ctr(int ctr, int enable)
-{
-	u32 pmlca = get_pmlca(ctr);
-
-	pmlca &= ~PMLCA_FC;
-
-	if (enable)
-		pmlca |= PMLCA_CE;
-	else
-		pmlca &= ~PMLCA_CE;
-
-	set_pmlca(ctr, pmlca);
-}
-
-void pmc_start_ctrs(int enable)
-{
-	u32 pmgc0 = mfpmr(PMRN_PMGC0);
-
-	pmgc0 &= ~PMGC0_FAC;
-	pmgc0 |= PMGC0_FCECE;
-
-	if (enable)
-		pmgc0 |= PMGC0_PMIE;
-	else
-		pmgc0 &= ~PMGC0_PMIE;
-
-	mtpmr(PMRN_PMGC0, pmgc0);
-}
-
-void pmc_stop_ctrs(void)
-{
-	u32 pmgc0 = mfpmr(PMRN_PMGC0);
-
-	pmgc0 |= PMGC0_FAC;
-
-	pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE);
-
-	mtpmr(PMRN_PMGC0, pmgc0);
-}
-
-void dump_pmcs(void)
-{
-	printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0));
-	printk("pmc\t\tpmlca\t\tpmlcb\n");
-	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0),
-			mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0));
-	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1),
-			mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1));
-	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2),
-			mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2));
-	printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3),
-			mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3));
-}
-
-EXPORT_SYMBOL(init_pmc_stop);
-EXPORT_SYMBOL(set_pmc_event);
-EXPORT_SYMBOL(set_pmc_user_kernel);
-EXPORT_SYMBOL(set_pmc_marked);
-EXPORT_SYMBOL(pmc_start_ctr);
-EXPORT_SYMBOL(pmc_start_ctrs);
-EXPORT_SYMBOL(pmc_stop_ctrs);
-EXPORT_SYMBOL(dump_pmcs);
diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c
index 2f5c765..75c6450 100644
--- a/arch/ppc/kernel/ppc_htab.c
+++ b/arch/ppc/kernel/ppc_htab.c
@@ -52,7 +52,7 @@ static int ppc_htab_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_htab_show, NULL);
 }
 
-struct file_operations ppc_htab_operations = {
+const struct file_operations ppc_htab_operations = {
 	.open		= ppc_htab_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -104,7 +104,7 @@ static char *pmc2_lookup(unsigned long mmcr0)
 static int ppc_htab_show(struct seq_file *m, void *v)
 {
 	unsigned long mmcr0 = 0, pmc1 = 0, pmc2 = 0;
-#if defined(CONFIG_PPC_STD_MMU) && !defined(CONFIG_PPC64BRIDGE)
+#if defined(CONFIG_PPC_STD_MMU)
 	unsigned int kptes = 0, uptes = 0;
 	PTE *ptr;
 #endif /* CONFIG_PPC_STD_MMU */
@@ -133,7 +133,6 @@ static int ppc_htab_show(struct seq_file *m, void *v)
 		return 0;
 	}
 
-#ifndef CONFIG_PPC64BRIDGE
 	for (ptr = Hash; ptr < Hash_end; ptr++) {
 		unsigned int mctx, vsid;
 
@@ -147,7 +146,6 @@ static int ppc_htab_show(struct seq_file *m, void *v)
 		else
 			uptes++;
 	}
-#endif
 
 	seq_printf(m,
 		      "PTE Hash Table Information\n"
@@ -155,20 +153,16 @@ static int ppc_htab_show(struct seq_file *m, void *v)
 		      "Buckets\t\t: %lu\n"
  		      "Address\t\t: %08lx\n"
 		      "Entries\t\t: %lu\n"
-#ifndef CONFIG_PPC64BRIDGE
 		      "User ptes\t: %u\n"
 		      "Kernel ptes\t: %u\n"
 		      "Percent full\t: %lu%%\n"
-#endif
                       , (unsigned long)(Hash_size>>10),
 		      (Hash_size/(sizeof(PTE)*8)),
 		      (unsigned long)Hash,
 		      Hash_size/sizeof(PTE)
-#ifndef CONFIG_PPC64BRIDGE
                       , uptes,
 		      kptes,
 		      ((kptes+uptes)*100) / (Hash_size/sizeof(PTE))
-#endif
 		);
 
 	seq_printf(m,
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 82adb46..865ba74 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -18,7 +18,6 @@
 #include <linux/bitops.h>
 
 #include <asm/page.h>
-#include <asm/semaphore.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -30,7 +29,6 @@
 #include <linux/adb.h>
 #include <linux/cuda.h>
 #include <linux/pmu.h>
-#include <asm/prom.h>
 #include <asm/system.h>
 #include <asm/pci-bridge.h>
 #include <asm/irq.h>
@@ -208,27 +206,6 @@ EXPORT_SYMBOL(adb_try_handler_change);
 EXPORT_SYMBOL(cuda_request);
 EXPORT_SYMBOL(cuda_poll);
 #endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_PPC_OF
-EXPORT_SYMBOL(find_devices);
-EXPORT_SYMBOL(find_type_devices);
-EXPORT_SYMBOL(find_compatible_devices);
-EXPORT_SYMBOL(find_path_device);
-EXPORT_SYMBOL(device_is_compatible);
-EXPORT_SYMBOL(machine_is_compatible);
-EXPORT_SYMBOL(find_all_nodes);
-EXPORT_SYMBOL(get_property);
-EXPORT_SYMBOL(request_OF_resource);
-EXPORT_SYMBOL(release_OF_resource);
-EXPORT_SYMBOL(of_find_node_by_name);
-EXPORT_SYMBOL(of_find_node_by_type);
-EXPORT_SYMBOL(of_find_compatible_node);
-EXPORT_SYMBOL(of_find_node_by_path);
-EXPORT_SYMBOL(of_find_all_nodes);
-EXPORT_SYMBOL(of_get_parent);
-EXPORT_SYMBOL(of_get_next_child);
-EXPORT_SYMBOL(of_node_get);
-EXPORT_SYMBOL(of_node_put);
-#endif /* CONFIG_PPC_OF */
 #if defined(CONFIG_BOOTX_TEXT)
 EXPORT_SYMBOL(btext_update_display);
 #endif
@@ -262,9 +239,6 @@ EXPORT_SYMBOL(console_drivers);
 EXPORT_SYMBOL(xmon);
 EXPORT_SYMBOL(xmon_printf);
 #endif
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
 
 #if defined(CONFIG_KGDB) || defined(CONFIG_XMON)
 extern void (*debugger)(struct pt_regs *regs);
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 53e9dea..1f79e84 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -1,5 +1,5 @@
 /*
- * Common prep/chrp boot and setup code.
+ * Common prep boot and setup code.
  */
 
 #include <linux/config.h>
@@ -72,17 +72,12 @@ unsigned long ISA_DMA_THRESHOLD;
 unsigned int DMA_MODE_READ;
 unsigned int DMA_MODE_WRITE;
 
-#ifdef CONFIG_PPC_MULTIPLATFORM
-int _machine = 0;
-EXPORT_SYMBOL(_machine);
-
+#ifdef CONFIG_PPC_PREP
 extern void prep_init(unsigned long r3, unsigned long r4,
 		unsigned long r5, unsigned long r6, unsigned long r7);
-extern void chrp_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7);
 
 dev_t boot_dev;
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+#endif /* CONFIG_PPC_PREP */
 
 int have_of;
 EXPORT_SYMBOL(have_of);
@@ -319,72 +314,12 @@ early_init(int r3, int r4, int r5)
 	identify_cpu(offset, 0);
 	do_cpu_ftr_fixups(offset);
 
-#if defined(CONFIG_PPC_OF)
-	reloc_got2(offset);
-
-	/*
-	 * don't do anything on prep
-	 * for now, don't use bootinfo because it breaks yaboot 0.5
-	 * and assume that if we didn't find a magic number, we have OF
-	 */
-	if (*(unsigned long *)(0) != 0xdeadc0de)
-		phys = prom_init(r3, r4, (prom_entry)r5);
-
-	reloc_got2(-offset);
-#endif
-
 	return phys;
 }
 
-#ifdef CONFIG_PPC_OF
-/*
- * Assume here that all clock rates are the same in a
- * smp system.  -- Cort
- */
-int
-of_show_percpuinfo(struct seq_file *m, int i)
-{
-	struct device_node *cpu_node;
-	u32 *fp;
-	int s;
-	
-	cpu_node = find_type_devices("cpu");
-	if (!cpu_node)
-		return 0;
-	for (s = 0; s < i && cpu_node->next; s++)
-		cpu_node = cpu_node->next;
-	fp = (u32 *)get_property(cpu_node, "clock-frequency", NULL);
-	if (fp)
-		seq_printf(m, "clock\t\t: %dMHz\n", *fp / 1000000);
-	return 0;
-}
-
-void __init
-intuit_machine_type(void)
-{
-	char *model;
-	struct device_node *root;
-	
-	/* ask the OF info if we're a chrp or pmac */
-	root = find_path_device("/");
-	if (root != 0) {
-		/* assume pmac unless proven to be chrp -- Cort */
-		_machine = _MACH_Pmac;
-		model = get_property(root, "device_type", NULL);
-		if (model && !strncmp("chrp", model, 4))
-			_machine = _MACH_chrp;
-		else {
-			model = get_property(root, "model", NULL);
-			if (model && !strncmp(model, "IBM", 3))
-				_machine = _MACH_chrp;
-		}
-	}
-}
-#endif
-
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PREP
 /*
- * The PPC_MULTIPLATFORM version of platform_init...
+ * The PPC_PREP version of platform_init...
  */
 void __init
 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
@@ -399,161 +334,9 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 
 	parse_bootinfo(find_bootinfo());
 
-	/* if we didn't get any bootinfo telling us what we are... */
-	if (_machine == 0) {
-		/* prep boot loader tells us if we're prep or not */
-		if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
-			_machine = _MACH_prep;
-	}
-
-#ifdef CONFIG_PPC_PREP
-	/* not much more to do here, if prep */
-	if (_machine == _MACH_prep) {
-		prep_init(r3, r4, r5, r6, r7);
-		return;
-	}
-#endif
-
-#ifdef CONFIG_PPC_OF
-	have_of = 1;
-
-	/* prom_init has already been called from __start */
-	if (boot_infos)
-		relocate_nodes();
-
-	/* If we aren't PReP, we can find out if we're Pmac
-	 * or CHRP with this. */
-	if (_machine == 0)
-		intuit_machine_type();
-
-	/* finish_device_tree may need _machine defined. */
-	finish_device_tree();
-
-	/*
-	 * If we were booted via quik, r3 points to the physical
-	 * address of the command-line parameters.
-	 * If we were booted from an xcoff image (i.e. netbooted or
-	 * booted from floppy), we get the command line from the
-	 * bootargs property of the /chosen node.
-	 * If an initial ramdisk is present, r3 and r4
-	 * are used for initrd_start and initrd_size,
-	 * otherwise they contain 0xdeadbeef.
-	 */
-	if (r3 >= 0x4000 && r3 < 0x800000 && r4 == 0) {
-		strlcpy(cmd_line, (char *)r3 + KERNELBASE,
-			sizeof(cmd_line));
-	} else if (boot_infos != 0) {
-		/* booted by BootX - check for ramdisk */
-		if (boot_infos->kernelParamsOffset != 0)
-			strlcpy(cmd_line, (char *) boot_infos
-				+ boot_infos->kernelParamsOffset,
-				sizeof(cmd_line));
-#ifdef CONFIG_BLK_DEV_INITRD
-		if (boot_infos->ramDisk) {
-			initrd_start = (unsigned long) boot_infos
-				+ boot_infos->ramDisk;
-			initrd_end = initrd_start + boot_infos->ramDiskSize;
-			initrd_below_start_ok = 1;
-		}
-#endif
-	} else {
-		struct device_node *chosen;
-		char *p;
-	
-#ifdef CONFIG_BLK_DEV_INITRD
-		if (r3 && r4 && r4 != 0xdeadbeef) {
-			if (r3 < KERNELBASE)
-				r3 += KERNELBASE;
-			initrd_start = r3;
-			initrd_end = r3 + r4;
-			ROOT_DEV = Root_RAM0;
-			initrd_below_start_ok = 1;
-		}
-#endif
-		chosen = find_devices("chosen");
-		if (chosen != NULL) {
-			p = get_property(chosen, "bootargs", NULL);
-			if (p && *p) {
-				strlcpy(cmd_line, p, sizeof(cmd_line));
-			}
-		}
-	}
-#ifdef CONFIG_ADB
-	if (strstr(cmd_line, "adb_sync")) {
-		extern int __adb_probe_sync;
-		__adb_probe_sync = 1;
-	}
-#endif /* CONFIG_ADB */
-
-	switch (_machine) {
-#ifdef CONFIG_PPC_CHRP
-	case _MACH_chrp:
-		chrp_init(r3, r4, r5, r6, r7);
-		break;
-#endif
-	}
-#endif /* CONFIG_PPC_OF */
+	prep_init(r3, r4, r5, r6, r7);
 }
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
-#ifdef CONFIG_PPC_OF
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-extern char *of_stdout_device;
-
-static int __init set_preferred_console(void)
-{
-	struct device_node *prom_stdout;
-	char *name;
-	int offset = 0;
-
-	if (of_stdout_device == NULL)
-		return -ENODEV;
-
-	/* The user has requested a console so this is already set up. */
-	if (strstr(saved_command_line, "console="))
-		return -EBUSY;
-
-	prom_stdout = find_path_device(of_stdout_device);
-	if (!prom_stdout)
-		return -ENODEV;
-
-	name = (char *)get_property(prom_stdout, "name", NULL);
-	if (!name)
-		return -ENODEV;
-
-	if (strcmp(name, "serial") == 0) {
-		int i;
-		u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
-		if (i > 8) {
-			switch (reg[1]) {
-				case 0x3f8:
-					offset = 0;
-					break;
-				case 0x2f8:
-					offset = 1;
-					break;
-				case 0x898:
-					offset = 2;
-					break;
-				case 0x890:
-					offset = 3;
-					break;
-				default:
-					/* We dont recognise the serial port */
-					return -ENODEV;
-			}
-		}
-	} else if (strcmp(name, "ch-a") == 0)
-		offset = 0;
-	else if (strcmp(name, "ch-b") == 0)
-		offset = 1;
-	else
-		return -ENODEV;
-	return add_preferred_console("ttyS", offset, NULL);
-}
-console_initcall(set_preferred_console);
-#endif /* CONFIG_SERIAL_CORE_CONSOLE */
-#endif /* CONFIG_PPC_OF */
+#endif /* CONFIG_PPC_PREP */
 
 struct bi_record *find_bootinfo(void)
 {
@@ -589,23 +372,6 @@ void parse_bootinfo(struct bi_record *rec)
 			initrd_end = data[0] + data[1] + KERNELBASE;
 			break;
 #endif /* CONFIG_BLK_DEV_INITRD */
-#ifdef CONFIG_PPC_MULTIPLATFORM
-		case BI_MACHTYPE:
-			/* Machine types changed with the merge. Since the
-			 * bootinfo are now deprecated, we can just hard code
-			 * the appropriate conversion here for when we are
-			 * called with yaboot which passes us a machine type
-			 * this way.
-			 */
-			switch(data[0]) {
-			case 1: _machine = _MACH_prep; break;
-			case 2: _machine = _MACH_Pmac; break;
-			case 4: _machine = _MACH_chrp; break;
-			default:
-				_machine = data[0];
-			}
-			break;
-#endif
 		case BI_MEMSIZE:
 			boot_mem_size = data[0];
 			break;
@@ -631,9 +397,6 @@ machine_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #ifdef CONFIG_6xx
 	ppc_md.power_save = ppc6xx_idle;
 #endif
-#ifdef CONFIG_POWER4
-	ppc_md.power_save = power4_idle;
-#endif
 
 	platform_init(r3, r4, r5, r6, r7);
 
@@ -711,7 +474,7 @@ int __init ppc_init(void)
 	if ( ppc_md.progress ) ppc_md.progress("             ", 0xffff);
 
 	/* register CPU devices */
-	for_each_cpu(i)
+	for_each_possible_cpu(i)
 		register_cpu(&cpu_devices[i], i, NULL);
 
 	/* call platform init */
@@ -799,7 +562,4 @@ void __init setup_arch(char **cmdline_p)
 	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
 
 	paging_init();
-
-	/* this is for modules since _machine can be a define -- Cort */
-	ppc_md.ppc_machine = _machine;
 }
diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c
index e55cdda..f77795a 100644
--- a/arch/ppc/kernel/smp.c
+++ b/arch/ppc/kernel/smp.c
@@ -311,7 +311,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	/* Backup CPU 0 state */
 	__save_cpu_setup();
 
-	for_each_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		if (cpu == smp_processor_id())
 			continue;
 		/* create a process for the processor */
diff --git a/arch/ppc/kernel/swsusp.S b/arch/ppc/kernel/swsusp.S
deleted file mode 100644
index 69773cc..0000000
--- a/arch/ppc/kernel/swsusp.S
+++ /dev/null
@@ -1,349 +0,0 @@
-#include <linux/config.h>
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-
-/*
- * Structure for storing CPU registers on the save area.
- */
-#define SL_SP		0
-#define SL_PC		4
-#define SL_MSR		8
-#define SL_SDR1		0xc
-#define SL_SPRG0	0x10	/* 4 sprg's */
-#define SL_DBAT0	0x20
-#define SL_IBAT0	0x28
-#define SL_DBAT1	0x30
-#define SL_IBAT1	0x38
-#define SL_DBAT2	0x40
-#define SL_IBAT2	0x48
-#define SL_DBAT3	0x50
-#define SL_IBAT3	0x58
-#define SL_TB		0x60
-#define SL_R2		0x68
-#define SL_CR		0x6c
-#define SL_LR		0x70
-#define SL_R12		0x74	/* r12 to r31 */
-#define SL_SIZE		(SL_R12 + 80)
-
-	.section .data
-	.align	5
-
-_GLOBAL(swsusp_save_area)
-	.space	SL_SIZE
-
-
-	.section .text
-	.align	5
-
-_GLOBAL(swsusp_arch_suspend)
-
-	lis	r11,swsusp_save_area@h
-	ori	r11,r11,swsusp_save_area@l
-
-	mflr	r0
-	stw	r0,SL_LR(r11)
-	mfcr	r0
-	stw	r0,SL_CR(r11)
-	stw	r1,SL_SP(r11)
-	stw	r2,SL_R2(r11)
-	stmw	r12,SL_R12(r11)
-
-	/* Save MSR & SDR1 */
-	mfmsr	r4
-	stw	r4,SL_MSR(r11)
-	mfsdr1	r4
-	stw	r4,SL_SDR1(r11)
-
-	/* Get a stable timebase and save it */
-1:	mftbu	r4
-	stw	r4,SL_TB(r11)
-	mftb	r5
-	stw	r5,SL_TB+4(r11)
-	mftbu	r3
-	cmpw	r3,r4
-	bne	1b
-
-	/* Save SPRGs */
-	mfsprg	r4,0
-	stw	r4,SL_SPRG0(r11)
-	mfsprg	r4,1
-	stw	r4,SL_SPRG0+4(r11)
-	mfsprg	r4,2
-	stw	r4,SL_SPRG0+8(r11)
-	mfsprg	r4,3
-	stw	r4,SL_SPRG0+12(r11)
-
-	/* Save BATs */
-	mfdbatu	r4,0
-	stw	r4,SL_DBAT0(r11)
-	mfdbatl	r4,0
-	stw	r4,SL_DBAT0+4(r11)
-	mfdbatu	r4,1
-	stw	r4,SL_DBAT1(r11)
-	mfdbatl	r4,1
-	stw	r4,SL_DBAT1+4(r11)
-	mfdbatu	r4,2
-	stw	r4,SL_DBAT2(r11)
-	mfdbatl	r4,2
-	stw	r4,SL_DBAT2+4(r11)
-	mfdbatu	r4,3
-	stw	r4,SL_DBAT3(r11)
-	mfdbatl	r4,3
-	stw	r4,SL_DBAT3+4(r11)
-	mfibatu	r4,0
-	stw	r4,SL_IBAT0(r11)
-	mfibatl	r4,0
-	stw	r4,SL_IBAT0+4(r11)
-	mfibatu	r4,1
-	stw	r4,SL_IBAT1(r11)
-	mfibatl	r4,1
-	stw	r4,SL_IBAT1+4(r11)
-	mfibatu	r4,2
-	stw	r4,SL_IBAT2(r11)
-	mfibatl	r4,2
-	stw	r4,SL_IBAT2+4(r11)
-	mfibatu	r4,3
-	stw	r4,SL_IBAT3(r11)
-	mfibatl	r4,3
-	stw	r4,SL_IBAT3+4(r11)
-
-#if  0
-	/* Backup various CPU config stuffs */
-	bl	__save_cpu_setup
-#endif
-	/* Call the low level suspend stuff (we should probably have made
-	 * a stackframe...
-	 */
-	bl	swsusp_save
-
-	/* Restore LR from the save area */
-	lis	r11,swsusp_save_area@h
-	ori	r11,r11,swsusp_save_area@l
-	lwz	r0,SL_LR(r11)
-	mtlr	r0
-
-	blr
-
-
-/* Resume code */
-_GLOBAL(swsusp_arch_resume)
-
-	/* Stop pending alitvec streams and memory accesses */
-BEGIN_FTR_SECTION
-	DSSALL
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
- 	sync
-
-	/* Disable MSR:DR to make sure we don't take a TLB or
-	 * hash miss during the copy, as our hash table will
-	 * for a while be unuseable. For .text, we assume we are
-	 * covered by a BAT. This works only for non-G5 at this
-	 * point. G5 will need a better approach, possibly using
-	 * a small temporary hash table filled with large mappings,
-	 * disabling the MMU completely isn't a good option for
-	 * performance reasons.
-	 * (Note that 750's may have the same performance issue as
-	 * the G5 in this case, we should investigate using moving
-	 * BATs for these CPUs)
-	 */
-	mfmsr	r0
-	sync
-	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
-	mtmsr	r0
-	sync
-	isync
-
-	/* Load ptr the list of pages to copy in r3 */
-	lis	r11,(pagedir_nosave - KERNELBASE)@h
-	ori	r11,r11,pagedir_nosave@l
-	lwz	r10,0(r11)
-
-	/* Copy the pages. This is a very basic implementation, to
-	 * be replaced by something more cache efficient */
-1:
-	tophys(r3,r10)
-	li	r0,256
-	mtctr	r0
-	lwz	r11,pbe_address(r3)	/* source */
-	tophys(r5,r11)
-	lwz	r10,pbe_orig_address(r3)	/* destination */
-	tophys(r6,r10)
-2:
-	lwz	r8,0(r5)
-	lwz	r9,4(r5)
-	lwz	r10,8(r5)
-	lwz	r11,12(r5)
-	addi	r5,r5,16
-	stw	r8,0(r6)
-	stw	r9,4(r6)
-	stw	r10,8(r6)
-	stw	r11,12(r6)
-	addi	r6,r6,16
-	bdnz	2b
-	lwz		r10,pbe_next(r3)
-	cmpwi	0,r10,0
-	bne	1b
-
-	/* Do a very simple cache flush/inval of the L1 to ensure
-	 * coherency of the icache
-	 */
-	lis	r3,0x0002
-	mtctr	r3
-	li	r3, 0
-1:
-	lwz	r0,0(r3)
-	addi	r3,r3,0x0020
-	bdnz	1b
-	isync
-	sync
-
-	/* Now flush those cache lines */
-	lis	r3,0x0002
-	mtctr	r3
-	li	r3, 0
-1:
-	dcbf	0,r3
-	addi	r3,r3,0x0020
-	bdnz	1b
-	sync
-
-	/* Ok, we are now running with the kernel data of the old
-	 * kernel fully restored. We can get to the save area
-	 * easily now. As for the rest of the code, it assumes the
-	 * loader kernel and the booted one are exactly identical
-	 */
-	lis	r11,swsusp_save_area@h
-	ori	r11,r11,swsusp_save_area@l
-	tophys(r11,r11)
-
-#if 0
-	/* Restore various CPU config stuffs */
-	bl	__restore_cpu_setup
-#endif
-	/* Restore the BATs, and SDR1.  Then we can turn on the MMU.
-	 * This is a bit hairy as we are running out of those BATs,
-	 * but first, our code is probably in the icache, and we are
-	 * writing the same value to the BAT, so that should be fine,
-	 * though a better solution will have to be found long-term
-	 */
-	lwz	r4,SL_SDR1(r11)
-	mtsdr1	r4
-	lwz	r4,SL_SPRG0(r11)
-	mtsprg	0,r4
-	lwz	r4,SL_SPRG0+4(r11)
-	mtsprg	1,r4
-	lwz	r4,SL_SPRG0+8(r11)
-	mtsprg	2,r4
-	lwz	r4,SL_SPRG0+12(r11)
-	mtsprg	3,r4
-
-#if 0
-	lwz	r4,SL_DBAT0(r11)
-	mtdbatu	0,r4
-	lwz	r4,SL_DBAT0+4(r11)
-	mtdbatl	0,r4
-	lwz	r4,SL_DBAT1(r11)
-	mtdbatu	1,r4
-	lwz	r4,SL_DBAT1+4(r11)
-	mtdbatl	1,r4
-	lwz	r4,SL_DBAT2(r11)
-	mtdbatu	2,r4
-	lwz	r4,SL_DBAT2+4(r11)
-	mtdbatl	2,r4
-	lwz	r4,SL_DBAT3(r11)
-	mtdbatu	3,r4
-	lwz	r4,SL_DBAT3+4(r11)
-	mtdbatl	3,r4
-	lwz	r4,SL_IBAT0(r11)
-	mtibatu	0,r4
-	lwz	r4,SL_IBAT0+4(r11)
-	mtibatl	0,r4
-	lwz	r4,SL_IBAT1(r11)
-	mtibatu	1,r4
-	lwz	r4,SL_IBAT1+4(r11)
-	mtibatl	1,r4
-	lwz	r4,SL_IBAT2(r11)
-	mtibatu	2,r4
-	lwz	r4,SL_IBAT2+4(r11)
-	mtibatl	2,r4
-	lwz	r4,SL_IBAT3(r11)
-	mtibatu	3,r4
-	lwz	r4,SL_IBAT3+4(r11)
-	mtibatl	3,r4
-#endif
-
-BEGIN_FTR_SECTION
-	li	r4,0
-	mtspr	SPRN_DBAT4U,r4
-	mtspr	SPRN_DBAT4L,r4
-	mtspr	SPRN_DBAT5U,r4
-	mtspr	SPRN_DBAT5L,r4
-	mtspr	SPRN_DBAT6U,r4
-	mtspr	SPRN_DBAT6L,r4
-	mtspr	SPRN_DBAT7U,r4
-	mtspr	SPRN_DBAT7L,r4
-	mtspr	SPRN_IBAT4U,r4
-	mtspr	SPRN_IBAT4L,r4
-	mtspr	SPRN_IBAT5U,r4
-	mtspr	SPRN_IBAT5L,r4
-	mtspr	SPRN_IBAT6U,r4
-	mtspr	SPRN_IBAT6L,r4
-	mtspr	SPRN_IBAT7U,r4
-	mtspr	SPRN_IBAT7L,r4
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
-
-	/* Flush all TLBs */
-	lis	r4,0x1000
-1:	addic.	r4,r4,-0x1000
-	tlbie	r4
-	blt	1b
-	sync
-
-	/* restore the MSR and turn on the MMU */
-	lwz	r3,SL_MSR(r11)
-	bl	turn_on_mmu
-	tovirt(r11,r11)
-
-	/* Restore TB */
-	li	r3,0
-	mttbl	r3
-	lwz	r3,SL_TB(r11)
-	lwz	r4,SL_TB+4(r11)
-	mttbu	r3
-	mttbl	r4
-
-	/* Kick decrementer */
-	li	r0,1
-	mtdec	r0
-
-	/* Restore the callee-saved registers and return */
-	lwz	r0,SL_CR(r11)
-	mtcr	r0
-	lwz	r2,SL_R2(r11)
-	lmw	r12,SL_R12(r11)
-	lwz	r1,SL_SP(r11)
-	lwz	r0,SL_LR(r11)
-	mtlr	r0
-
-	// XXX Note: we don't really need to call swsusp_resume
-
-	li	r3,0
-	blr
-
-/* FIXME:This construct is actually not useful since we don't shut
- * down the instruction MMU, we could just flip back MSR-DR on.
- */
-turn_on_mmu:
-	mflr	r4
-	mtsrr0	r4
-	mtsrr1	r3
-	sync
-	isync
-	rfi
-
diff --git a/arch/ppc/kernel/temp.c b/arch/ppc/kernel/temp.c
deleted file mode 100644
index 26bd8ea..0000000
--- a/arch/ppc/kernel/temp.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * temp.c	Thermal management for cpu's with Thermal Assist Units
- *
- * Written by Troy Benjegerdes <hozer@drgw.net>
- *
- * TODO:
- * dynamic power management to limit peak CPU temp (using ICTC)
- * calibration???
- *
- * Silly, crazy ideas: use cpu load (from scheduler) and ICTC to extend battery
- * life in portables, and add a 'performance/watt' metric somewhere in /proc
- */
-
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/reg.h>
-#include <asm/nvram.h>
-#include <asm/cache.h>
-#include <asm/8xx_immap.h>
-#include <asm/machdep.h>
-
-static struct tau_temp
-{
-	int interrupts;
-	unsigned char low;
-	unsigned char high;
-	unsigned char grew;
-} tau[NR_CPUS];
-
-struct timer_list tau_timer;
-
-#undef DEBUG
-
-/* TODO: put these in a /proc interface, with some sanity checks, and maybe
- * dynamic adjustment to minimize # of interrupts */
-/* configurable values for step size and how much to expand the window when
- * we get an interrupt. These are based on the limit that was out of range */
-#define step_size		2	/* step size when temp goes out of range */
-#define window_expand		1	/* expand the window by this much */
-/* configurable values for shrinking the window */
-#define shrink_timer	2*HZ	/* period between shrinking the window */
-#define min_window	2	/* minimum window size, degrees C */
-
-void set_thresholds(unsigned long cpu)
-{
-#ifdef CONFIG_TAU_INT
-	/*
-	 * setup THRM1,
-	 * threshold, valid bit, enable interrupts, interrupt when below threshold
-	 */
-	mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID);
-
-	/* setup THRM2,
-	 * threshold, valid bit, enable interrupts, interrupt when above threshhold
-	 */
-	mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE);
-#else
-	/* same thing but don't enable interrupts */
-	mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TID);
-	mtspr(SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V);
-#endif
-}
-
-void TAUupdate(int cpu)
-{
-	unsigned thrm;
-
-#ifdef DEBUG
-	printk("TAUupdate ");
-#endif
-
-	/* if both thresholds are crossed, the step_sizes cancel out
-	 * and the window winds up getting expanded twice. */
-	if((thrm = mfspr(SPRN_THRM1)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed low threshold */
-			if (tau[cpu].low >= step_size){
-				tau[cpu].low -= step_size;
-				tau[cpu].high -= (step_size - window_expand);
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("low threshold crossed ");
-#endif
-		}
-	}
-	if((thrm = mfspr(SPRN_THRM2)) & THRM1_TIV){ /* is valid? */
-		if(thrm & THRM1_TIN){ /* crossed high threshold */
-			if (tau[cpu].high <= 127-step_size){
-				tau[cpu].low += (step_size - window_expand);
-				tau[cpu].high += step_size;
-			}
-			tau[cpu].grew = 1;
-#ifdef DEBUG
-			printk("high threshold crossed ");
-#endif
-		}
-	}
-
-#ifdef DEBUG
-	printk("grew = %d\n", tau[cpu].grew);
-#endif
-
-#ifndef CONFIG_TAU_INT /* tau_timeout will do this if not using interrupts */
-	set_thresholds(cpu);
-#endif
-
-}
-
-#ifdef CONFIG_TAU_INT
-/*
- * TAU interrupts - called when we have a thermal assist unit interrupt
- * with interrupts disabled
- */
-
-void TAUException(struct pt_regs * regs)
-{
-	int cpu = smp_processor_id();
-
-	irq_enter();
-	tau[cpu].interrupts++;
-
-	TAUupdate(cpu);
-
-	irq_exit();
-}
-#endif /* CONFIG_TAU_INT */
-
-static void tau_timeout(void * info)
-{
-	int cpu;
-	unsigned long flags;
-	int size;
-	int shrink;
-
-	/* disabling interrupts *should* be okay */
-	local_irq_save(flags);
-	cpu = smp_processor_id();
-
-#ifndef CONFIG_TAU_INT
-	TAUupdate(cpu);
-#endif
-
-	size = tau[cpu].high - tau[cpu].low;
-	if (size > min_window && ! tau[cpu].grew) {
-		/* do an exponential shrink of half the amount currently over size */
-		shrink = (2 + size - min_window) / 4;
-		if (shrink) {
-			tau[cpu].low += shrink;
-			tau[cpu].high -= shrink;
-		} else { /* size must have been min_window + 1 */
-			tau[cpu].low += 1;
-#if 1 /* debug */
-			if ((tau[cpu].high - tau[cpu].low) != min_window){
-				printk(KERN_ERR "temp.c: line %d, logic error\n", __LINE__);
-			}
-#endif
-		}
-	}
-
-	tau[cpu].grew = 0;
-
-	set_thresholds(cpu);
-
-	/*
-	 * Do the enable every time, since otherwise a bunch of (relatively)
-	 * complex sleep code needs to be added. One mtspr every time
-	 * tau_timeout is called is probably not a big deal.
-	 *
-	 * Enable thermal sensor and set up sample interval timer
-	 * need 20 us to do the compare.. until a nice 'cpu_speed' function
-	 * call is implemented, just assume a 500 mhz clock. It doesn't really
-	 * matter if we take too long for a compare since it's all interrupt
-	 * driven anyway.
-	 *
-	 * use a extra long time.. (60 us @ 500 mhz)
-	 */
-	mtspr(SPRN_THRM3, THRM3_SITV(500*60) | THRM3_E);
-
-	local_irq_restore(flags);
-}
-
-static void tau_timeout_smp(unsigned long unused)
-{
-
-	/* schedule ourselves to be run again */
-	mod_timer(&tau_timer, jiffies + shrink_timer) ;
-	on_each_cpu(tau_timeout, NULL, 1, 0);
-}
-
-/*
- * setup the TAU
- *
- * Set things up to use THRM1 as a temperature lower bound, and THRM2 as an upper bound.
- * Start off at zero
- */
-
-int tau_initialized = 0;
-
-void __init TAU_init_smp(void * info)
-{
-	unsigned long cpu = smp_processor_id();
-
-	/* set these to a reasonable value and let the timer shrink the
-	 * window */
-	tau[cpu].low = 5;
-	tau[cpu].high = 120;
-
-	set_thresholds(cpu);
-}
-
-int __init TAU_init(void)
-{
-	/* We assume in SMP that if one CPU has TAU support, they
-	 * all have it --BenH
-	 */
-	if (!cpu_has_feature(CPU_FTR_TAU)) {
-		printk("Thermal assist unit not available\n");
-		tau_initialized = 0;
-		return 1;
-	}
-
-
-	/* first, set up the window shrinking timer */
-	init_timer(&tau_timer);
-	tau_timer.function = tau_timeout_smp;
-	tau_timer.expires = jiffies + shrink_timer;
-	add_timer(&tau_timer);
-
-	on_each_cpu(TAU_init_smp, NULL, 1, 0);
-
-	printk("Thermal assist unit ");
-#ifdef CONFIG_TAU_INT
-	printk("using interrupts, ");
-#else
-	printk("using timers, ");
-#endif
-	printk("shrink_timer: %d jiffies\n", shrink_timer);
-	tau_initialized = 1;
-
-	return 0;
-}
-
-__initcall(TAU_init);
-
-/*
- * return current temp
- */
-
-u32 cpu_temp_both(unsigned long cpu)
-{
-	return ((tau[cpu].high << 16) | tau[cpu].low);
-}
-
-int cpu_temp(unsigned long cpu)
-{
-	return ((tau[cpu].high + tau[cpu].low) / 2);
-}
-
-int tau_interrupts(unsigned long cpu)
-{
-	return (tau[cpu].interrupts);
-}
diff --git a/arch/ppc/lib/strcase.c b/arch/ppc/lib/strcase.c
index 36b5210..3b0094c 100644
--- a/arch/ppc/lib/strcase.c
+++ b/arch/ppc/lib/strcase.c
@@ -1,4 +1,5 @@
 #include <linux/ctype.h>
+#include <linux/types.h>
 
 int strcasecmp(const char *s1, const char *s2)
 {
@@ -11,7 +12,7 @@ int strcasecmp(const char *s1, const char *s2)
 	return c1 - c2;
 }
 
-int strncasecmp(const char *s1, const char *s2, int n)
+int strncasecmp(const char *s1, const char *s2, size_t n)
 {
 	int c1, c2;
 
diff --git a/arch/ppc/math-emu/Makefile b/arch/ppc/math-emu/Makefile
deleted file mode 100644
index 754143e..0000000
--- a/arch/ppc/math-emu/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-
-obj-y				:= math.o fmr.o lfd.o stfd.o
-
-obj-$(CONFIG_MATH_EMULATION)	+= fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \
-					fctiw.o fctiwz.o fdiv.o fdivs.o \
-					fmadd.o fmadds.o fmsub.o fmsubs.o \
-					fmul.o fmuls.o fnabs.o fneg.o types.o \
-					fnmadd.o fnmadds.o fnmsub.o fnmsubs.o \
-					fres.o frsp.o frsqrte.o fsel.o lfs.o \
-					fsqrt.o	fsqrts.o fsub.o fsubs.o \
-					mcrfs.o mffs.o mtfsb0.o mtfsb1.o \
-					mtfsf.o mtfsfi.o stfiwx.o stfs.o \
-					udivmodti4.o
diff --git a/arch/ppc/math-emu/double.h b/arch/ppc/math-emu/double.h
deleted file mode 100644
index ffba8b6..0000000
--- a/arch/ppc/math-emu/double.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Definitions for IEEE Double Precision
- */
-
-#if _FP_W_TYPE_SIZE < 32
-#error "Here's a nickel kid.  Go buy yourself a real computer."
-#endif
-
-#if _FP_W_TYPE_SIZE < 64
-#define _FP_FRACTBITS_D		(2 * _FP_W_TYPE_SIZE)
-#else
-#define _FP_FRACTBITS_D		_FP_W_TYPE_SIZE
-#endif
-
-#define _FP_FRACBITS_D		53
-#define _FP_FRACXBITS_D		(_FP_FRACTBITS_D - _FP_FRACBITS_D)
-#define _FP_WFRACBITS_D		(_FP_WORKBITS + _FP_FRACBITS_D)
-#define _FP_WFRACXBITS_D	(_FP_FRACTBITS_D - _FP_WFRACBITS_D)
-#define _FP_EXPBITS_D		11
-#define _FP_EXPBIAS_D		1023
-#define _FP_EXPMAX_D		2047
-
-#define _FP_QNANBIT_D		\
-	((_FP_W_TYPE)1 << ((_FP_FRACBITS_D-2) % _FP_W_TYPE_SIZE))
-#define _FP_IMPLBIT_D		\
-	((_FP_W_TYPE)1 << ((_FP_FRACBITS_D-1) % _FP_W_TYPE_SIZE))
-#define _FP_OVERFLOW_D		\
-	((_FP_W_TYPE)1 << (_FP_WFRACBITS_D % _FP_W_TYPE_SIZE))
-
-#if _FP_W_TYPE_SIZE < 64
-
-union _FP_UNION_D
-{
-  double flt;
-  struct {
-#if __BYTE_ORDER == __BIG_ENDIAN
-    unsigned sign  : 1;
-    unsigned exp   : _FP_EXPBITS_D;
-    unsigned frac1 : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0) - _FP_W_TYPE_SIZE;
-    unsigned frac0 : _FP_W_TYPE_SIZE;
-#else
-    unsigned frac0 : _FP_W_TYPE_SIZE;
-    unsigned frac1 : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0) - _FP_W_TYPE_SIZE;
-    unsigned exp   : _FP_EXPBITS_D;
-    unsigned sign  : 1;
-#endif
-  } bits __attribute__((packed));
-};
-
-#define FP_DECL_D(X)		_FP_DECL(2,X)
-#define FP_UNPACK_RAW_D(X,val)	_FP_UNPACK_RAW_2(D,X,val)
-#define FP_PACK_RAW_D(val,X)	_FP_PACK_RAW_2(D,val,X)
-
-#define FP_UNPACK_D(X,val)		\
-  do {					\
-    _FP_UNPACK_RAW_2(D,X,val);		\
-    _FP_UNPACK_CANONICAL(D,2,X);	\
-  } while (0)
-
-#define FP_PACK_D(val,X)		\
-  do {					\
-    _FP_PACK_CANONICAL(D,2,X);		\
-    _FP_PACK_RAW_2(D,val,X);		\
-  } while (0)
-
-#define FP_NEG_D(R,X)		_FP_NEG(D,2,R,X)
-#define FP_ADD_D(R,X,Y)		_FP_ADD(D,2,R,X,Y)
-#define FP_SUB_D(R,X,Y)		_FP_SUB(D,2,R,X,Y)
-#define FP_MUL_D(R,X,Y)		_FP_MUL(D,2,R,X,Y)
-#define FP_DIV_D(R,X,Y)		_FP_DIV(D,2,R,X,Y)
-#define FP_SQRT_D(R,X)		_FP_SQRT(D,2,R,X)
-
-#define FP_CMP_D(r,X,Y,un)	_FP_CMP(D,2,r,X,Y,un)
-#define FP_CMP_EQ_D(r,X,Y)	_FP_CMP_EQ(D,2,r,X,Y)
-
-#define FP_TO_INT_D(r,X,rsz,rsg)  _FP_TO_INT(D,2,r,X,rsz,rsg)
-#define FP_FROM_INT_D(X,r,rs,rt)  _FP_FROM_INT(D,2,X,r,rs,rt)
-
-#else
-
-union _FP_UNION_D
-{
-  double flt;
-  struct {
-#if __BYTE_ORDER == __BIG_ENDIAN
-    unsigned sign : 1;
-    unsigned exp  : _FP_EXPBITS_D;
-    unsigned long frac : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0);
-#else
-    unsigned long frac : _FP_FRACBITS_D - (_FP_IMPLBIT_D != 0);
-    unsigned exp  : _FP_EXPBITS_D;
-    unsigned sign : 1;
-#endif
-  } bits __attribute__((packed));
-};
-
-#define FP_DECL_D(X)		_FP_DECL(1,X)
-#define FP_UNPACK_RAW_D(X,val)	_FP_UNPACK_RAW_1(D,X,val)
-#define FP_PACK_RAW_D(val,X)	_FP_PACK_RAW_1(D,val,X)
-
-#define FP_UNPACK_D(X,val)		\
-  do {					\
-    _FP_UNPACK_RAW_1(D,X,val);		\
-    _FP_UNPACK_CANONICAL(D,1,X);	\
-  } while (0)
-
-#define FP_PACK_D(val,X)		\
-  do {					\
-    _FP_PACK_CANONICAL(D,1,X);		\
-    _FP_PACK_RAW_1(D,val,X);		\
-  } while (0)
-
-#define FP_NEG_D(R,X)		_FP_NEG(D,1,R,X)
-#define FP_ADD_D(R,X,Y)		_FP_ADD(D,1,R,X,Y)
-#define FP_SUB_D(R,X,Y)		_FP_SUB(D,1,R,X,Y)
-#define FP_MUL_D(R,X,Y)		_FP_MUL(D,1,R,X,Y)
-#define FP_DIV_D(R,X,Y)		_FP_DIV(D,1,R,X,Y)
-#define FP_SQRT_D(R,X)		_FP_SQRT(D,1,R,X)
-
-/* The implementation of _FP_MUL_D and _FP_DIV_D should be chosen by
-   the target machine.  */
-
-#define FP_CMP_D(r,X,Y,un)	_FP_CMP(D,1,r,X,Y,un)
-#define FP_CMP_EQ_D(r,X,Y)	_FP_CMP_EQ(D,1,r,X,Y)
-
-#define FP_TO_INT_D(r,X,rsz,rsg)  _FP_TO_INT(D,1,r,X,rsz,rsg)
-#define FP_FROM_INT_D(X,r,rs,rt)  _FP_FROM_INT(D,1,X,r,rs,rt)
-
-#endif /* W_TYPE_SIZE < 64 */
diff --git a/arch/ppc/math-emu/fabs.c b/arch/ppc/math-emu/fabs.c
deleted file mode 100644
index 41f0617..0000000
--- a/arch/ppc/math-emu/fabs.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-int
-fabs(u32 *frD, u32 *frB)
-{
-	frD[0] = frB[0] & 0x7fffffff;
-	frD[1] = frB[1];
-
-#ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
-	dump_double(frD);
-	printk("\n");
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/fadd.c b/arch/ppc/math-emu/fadd.c
deleted file mode 100644
index fc88364..0000000
--- a/arch/ppc/math-emu/fadd.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fadd(void *frD, void *frA, void *frB)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-#endif
-
-	if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
-	FP_ADD_D(R, A, B);
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_D(frD, R));
-}
diff --git a/arch/ppc/math-emu/fadds.c b/arch/ppc/math-emu/fadds.c
deleted file mode 100644
index 93025b6..0000000
--- a/arch/ppc/math-emu/fadds.c
+++ /dev/null
@@ -1,39 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-int
-fadds(void *frD, void *frA, void *frB)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-#endif
-
-	if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
-	FP_ADD_D(R, A, B);
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_DS(frD, R));
-}
diff --git a/arch/ppc/math-emu/fcmpo.c b/arch/ppc/math-emu/fcmpo.c
deleted file mode 100644
index 4efac39..0000000
--- a/arch/ppc/math-emu/fcmpo.c
+++ /dev/null
@@ -1,46 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fcmpo(u32 *ccr, int crfD, void *frA, void *frB)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	int code[4] = { (1 << 3), (1 << 1), (1 << 2), (1 << 0) };
-	long cmp;
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-#endif
-
-	if (A_c == FP_CLS_NAN || B_c == FP_CLS_NAN)
-		ret |= EFLAG_VXVC;
-
-	FP_CMP_D(cmp, A, B, 2);
-	cmp = code[(cmp + 1) & 3];
-
-	__FPU_FPSCR &= ~(0x1f000);
-	__FPU_FPSCR |= (cmp << 12);
-
-	*ccr &= ~(15 << ((7 - crfD) << 2));
-	*ccr |= (cmp << ((7 - crfD) << 2));
-
-#ifdef DEBUG
-	printk("CR: %08x\n", *ccr);
-#endif
-
-	return ret;
-}
diff --git a/arch/ppc/math-emu/fcmpu.c b/arch/ppc/math-emu/fcmpu.c
deleted file mode 100644
index b7e3317..0000000
--- a/arch/ppc/math-emu/fcmpu.c
+++ /dev/null
@@ -1,42 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fcmpu(u32 *ccr, int crfD, void *frA, void *frB)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	int code[4] = { (1 << 3), (1 << 1), (1 << 2), (1 << 0) };
-	long cmp;
-
-#ifdef DEBUG
-	printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-#endif
-
-	FP_CMP_D(cmp, A, B, 2);
-	cmp = code[(cmp + 1) & 3];
-
-	__FPU_FPSCR &= ~(0x1f000);
-	__FPU_FPSCR |= (cmp << 12);
-
-	*ccr &= ~(15 << ((7 - crfD) << 2));
-	*ccr |= (cmp << ((7 - crfD) << 2));
-
-#ifdef DEBUG
-	printk("CR: %08x\n", *ccr);
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/fctiw.c b/arch/ppc/math-emu/fctiw.c
deleted file mode 100644
index 3b3c98b..0000000
--- a/arch/ppc/math-emu/fctiw.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fctiw(u32 *frD, void *frB)
-{
-	FP_DECL_D(B);
-	unsigned int r;
-
-	__FP_UNPACK_D(B, frB);
-	FP_TO_INT_D(r, B, 32, 1);
-	frD[1] = r;
-
-#ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
-	dump_double(frD);
-	printk("\n");
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/fctiwz.c b/arch/ppc/math-emu/fctiwz.c
deleted file mode 100644
index 7717eb6..0000000
--- a/arch/ppc/math-emu/fctiwz.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fctiwz(u32 *frD, void *frB)
-{
-	FP_DECL_D(B);
-	u32 fpscr;
-	unsigned int r;
-
-	fpscr = __FPU_FPSCR;
-	__FPU_FPSCR &= ~(3);
-	__FPU_FPSCR |= FP_RND_ZERO;
-
-	__FP_UNPACK_D(B, frB);
-	FP_TO_INT_D(r, B, 32, 1);
-	frD[1] = r;
-
-	__FPU_FPSCR = fpscr;
-
-#ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
-	dump_double(frD);
-	printk("\n");
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/fdiv.c b/arch/ppc/math-emu/fdiv.c
deleted file mode 100644
index f2fba82..0000000
--- a/arch/ppc/math-emu/fdiv.c
+++ /dev/null
@@ -1,53 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fdiv(void *frD, void *frA, void *frB)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-#endif
-
-	if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
-		ret |= EFLAG_VXZDZ;
-#ifdef DEBUG
-		printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
-#endif
-	}
-	if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
-		ret |= EFLAG_VXIDI;
-#ifdef DEBUG
-		printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
-#endif
-	}
-
-	if (B_c == FP_CLS_ZERO && A_c != FP_CLS_ZERO) {
-		ret |= EFLAG_DIVZERO;
-		if (__FPU_TRAP_P(EFLAG_DIVZERO))
-			return ret;
-	}
-	FP_DIV_D(R, A, B);
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_D(frD, R));
-}
diff --git a/arch/ppc/math-emu/fdivs.c b/arch/ppc/math-emu/fdivs.c
deleted file mode 100644
index b971196..0000000
--- a/arch/ppc/math-emu/fdivs.c
+++ /dev/null
@@ -1,55 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-int
-fdivs(void *frD, void *frA, void *frB)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-#endif
-
-	if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
-		ret |= EFLAG_VXZDZ;
-#ifdef DEBUG
-		printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
-#endif
-	}
-	if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
-		ret |= EFLAG_VXIDI;
-#ifdef DEBUG
-		printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
-#endif
-	}
-
-	if (B_c == FP_CLS_ZERO && A_c != FP_CLS_ZERO) {
-		ret |= EFLAG_DIVZERO;
-		if (__FPU_TRAP_P(EFLAG_DIVZERO))
-			return ret;
-	}
-
-	FP_DIV_D(R, A, B);
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_DS(frD, R));
-}
diff --git a/arch/ppc/math-emu/fmadd.c b/arch/ppc/math-emu/fmadd.c
deleted file mode 100644
index 0a1dbce..0000000
--- a/arch/ppc/math-emu/fmadd.c
+++ /dev/null
@@ -1,48 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fmadd(void *frD, void *frA, void *frB, void *frC)
-{
-	FP_DECL_D(R);
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(C);
-	FP_DECL_D(T);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-	printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
-#endif
-
-	if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
-	    (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
-                ret |= EFLAG_VXIMZ;
-
-	FP_MUL_D(T, A, C);
-
-	if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
-	FP_ADD_D(R, T, B);
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_D(frD, R));
-}
diff --git a/arch/ppc/math-emu/fmadds.c b/arch/ppc/math-emu/fmadds.c
deleted file mode 100644
index 0f70bba..0000000
--- a/arch/ppc/math-emu/fmadds.c
+++ /dev/null
@@ -1,49 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-int
-fmadds(void *frD, void *frA, void *frB, void *frC)
-{
-	FP_DECL_D(R);
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(C);
-	FP_DECL_D(T);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-	printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
-#endif
-
-	if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
-	    (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
-                ret |= EFLAG_VXIMZ;
-
-	FP_MUL_D(T, A, C);
-
-	if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
-	FP_ADD_D(R, T, B);
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_DS(frD, R));
-}
diff --git a/arch/ppc/math-emu/fmr.c b/arch/ppc/math-emu/fmr.c
deleted file mode 100644
index 28df700..0000000
--- a/arch/ppc/math-emu/fmr.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-int
-fmr(u32 *frD, u32 *frB)
-{
-	frD[0] = frB[0];
-	frD[1] = frB[1];
-
-#ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
-	dump_double(frD);
-	printk("\n");
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/fmsub.c b/arch/ppc/math-emu/fmsub.c
deleted file mode 100644
index 203fd48..0000000
--- a/arch/ppc/math-emu/fmsub.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fmsub(void *frD, void *frA, void *frB, void *frC)
-{
-	FP_DECL_D(R);
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(C);
-	FP_DECL_D(T);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-	printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
-#endif
-
-	if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
-	    (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
-		ret |= EFLAG_VXIMZ;
-
-	FP_MUL_D(T, A, C);
-
-	if (B_c != FP_CLS_NAN)
-		B_s ^= 1;
-
-	if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
-	FP_ADD_D(R, T, B);
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_D(frD, R));
-}
diff --git a/arch/ppc/math-emu/fmsubs.c b/arch/ppc/math-emu/fmsubs.c
deleted file mode 100644
index 8ce6862..0000000
--- a/arch/ppc/math-emu/fmsubs.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-int
-fmsubs(void *frD, void *frA, void *frB, void *frC)
-{
-	FP_DECL_D(R);
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(C);
-	FP_DECL_D(T);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-	printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
-#endif
-
-	if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
-	    (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
-		ret |= EFLAG_VXIMZ;
-
-	FP_MUL_D(T, A, C);
-
-	if (B_c != FP_CLS_NAN)
-		B_s ^= 1;
-
-	if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
-	FP_ADD_D(R, T, B);
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_DS(frD, R));
-}
diff --git a/arch/ppc/math-emu/fmul.c b/arch/ppc/math-emu/fmul.c
deleted file mode 100644
index 66c7e79..0000000
--- a/arch/ppc/math-emu/fmul.c
+++ /dev/null
@@ -1,42 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fmul(void *frD, void *frA, void *frB)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
-	       A_s, A_f1, A_f0, A_e, A_c, A_f1, A_f0, A_e + 1023);
-	printk("B: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
-	       B_s, B_f1, B_f0, B_e, B_c, B_f1, B_f0, B_e + 1023);
-#endif
-
-	if ((A_c == FP_CLS_INF && B_c == FP_CLS_ZERO) ||
-	    (A_c == FP_CLS_ZERO && B_c == FP_CLS_INF))
-		ret |= EFLAG_VXIMZ;
-
-	FP_MUL_D(R, A, B);
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
-	       R_s, R_f1, R_f0, R_e, R_c, R_f1, R_f0, R_e + 1023);
-#endif
-
-	return (ret | __FP_PACK_D(frD, R));
-}
diff --git a/arch/ppc/math-emu/fmuls.c b/arch/ppc/math-emu/fmuls.c
deleted file mode 100644
index 26bc427..0000000
--- a/arch/ppc/math-emu/fmuls.c
+++ /dev/null
@@ -1,43 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-int
-fmuls(void *frD, void *frA, void *frB)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
-	       A_s, A_f1, A_f0, A_e, A_c, A_f1, A_f0, A_e + 1023);
-	printk("B: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
-	       B_s, B_f1, B_f0, B_e, B_c, B_f1, B_f0, B_e + 1023);
-#endif
-
-	if ((A_c == FP_CLS_INF && B_c == FP_CLS_ZERO) ||
-	    (A_c == FP_CLS_ZERO && B_c == FP_CLS_INF))
-		ret |= EFLAG_VXIMZ;
-
-	FP_MUL_D(R, A, B);
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
-	       R_s, R_f1, R_f0, R_e, R_c, R_f1, R_f0, R_e + 1023);
-#endif
-
-	return (ret | __FP_PACK_DS(frD, R));
-}
diff --git a/arch/ppc/math-emu/fnabs.c b/arch/ppc/math-emu/fnabs.c
deleted file mode 100644
index c6b913d..0000000
--- a/arch/ppc/math-emu/fnabs.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-int
-fnabs(u32 *frD, u32 *frB)
-{
-	frD[0] = frB[0] | 0x80000000;
-	frD[1] = frB[1];
-
-#ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
-	dump_double(frD);
-	printk("\n");
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/fneg.c b/arch/ppc/math-emu/fneg.c
deleted file mode 100644
index fe9a98d..0000000
--- a/arch/ppc/math-emu/fneg.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-int
-fneg(u32 *frD, u32 *frB)
-{
-	frD[0] = frB[0] ^ 0x80000000;
-	frD[1] = frB[1];
-
-#ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
-	dump_double(frD);
-	printk("\n");
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/fnmadd.c b/arch/ppc/math-emu/fnmadd.c
deleted file mode 100644
index 7f31227..0000000
--- a/arch/ppc/math-emu/fnmadd.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fnmadd(void *frD, void *frA, void *frB, void *frC)
-{
-	FP_DECL_D(R);
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(C);
-	FP_DECL_D(T);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-	printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
-#endif
-
-	if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
-	    (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
-                ret |= EFLAG_VXIMZ;
-
-	FP_MUL_D(T, A, C);
-
-	if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
-	FP_ADD_D(R, T, B);
-
-	if (R_c != FP_CLS_NAN)
-		R_s ^= 1;
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_D(frD, R));
-}
diff --git a/arch/ppc/math-emu/fnmadds.c b/arch/ppc/math-emu/fnmadds.c
deleted file mode 100644
index 65454c9..0000000
--- a/arch/ppc/math-emu/fnmadds.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-int
-fnmadds(void *frD, void *frA, void *frB, void *frC)
-{
-	FP_DECL_D(R);
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(C);
-	FP_DECL_D(T);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-	printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
-#endif
-
-	if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
-	    (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
-                ret |= EFLAG_VXIMZ;
-
-	FP_MUL_D(T, A, C);
-
-	if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
-	FP_ADD_D(R, T, B);
-
-	if (R_c != FP_CLS_NAN)
-		R_s ^= 1;
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_DS(frD, R));
-}
diff --git a/arch/ppc/math-emu/fnmsub.c b/arch/ppc/math-emu/fnmsub.c
deleted file mode 100644
index f1ca748..0000000
--- a/arch/ppc/math-emu/fnmsub.c
+++ /dev/null
@@ -1,54 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fnmsub(void *frD, void *frA, void *frB, void *frC)
-{
-	FP_DECL_D(R);
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(C);
-	FP_DECL_D(T);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-	printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
-#endif
-
-	if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
-	    (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
-		ret |= EFLAG_VXIMZ;
-
-	FP_MUL_D(T, A, C);
-
-	if (B_c != FP_CLS_NAN)
-		B_s ^= 1;
-
-	if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
-	FP_ADD_D(R, T, B);
-
-	if (R_c != FP_CLS_NAN)
-		R_s ^= 1;
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_D(frD, R));
-}
diff --git a/arch/ppc/math-emu/fnmsubs.c b/arch/ppc/math-emu/fnmsubs.c
deleted file mode 100644
index 5c9a09a..0000000
--- a/arch/ppc/math-emu/fnmsubs.c
+++ /dev/null
@@ -1,55 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-int
-fnmsubs(void *frD, void *frA, void *frB, void *frC)
-{
-	FP_DECL_D(R);
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(C);
-	FP_DECL_D(T);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-	__FP_UNPACK_D(C, frC);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-	printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
-#endif
-
-	if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
-	    (A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
-		ret |= EFLAG_VXIMZ;
-
-	FP_MUL_D(T, A, C);
-
-	if (B_c != FP_CLS_NAN)
-		B_s ^= 1;
-
-	if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
-	FP_ADD_D(R, T, B);
-
-	if (R_c != FP_CLS_NAN)
-		R_s ^= 1;
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_DS(frD, R));
-}
diff --git a/arch/ppc/math-emu/fres.c b/arch/ppc/math-emu/fres.c
deleted file mode 100644
index ec11e46..0000000
--- a/arch/ppc/math-emu/fres.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-int
-fres(void *frD, void *frB)
-{
-#ifdef DEBUG
-	printk("%s: %p %p\n", __FUNCTION__, frD, frB);
-#endif
-	return -ENOSYS;
-}
diff --git a/arch/ppc/math-emu/frsp.c b/arch/ppc/math-emu/frsp.c
deleted file mode 100644
index d879b2a..0000000
--- a/arch/ppc/math-emu/frsp.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-int
-frsp(void *frD, void *frB)
-{
-	FP_DECL_D(B);
-
-#ifdef DEBUG
-	printk("%s: D %p, B %p\n", __FUNCTION__, frD, frB);
-#endif
-
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-#endif
-
-	return __FP_PACK_DS(frD, B);
-}
diff --git a/arch/ppc/math-emu/frsqrte.c b/arch/ppc/math-emu/frsqrte.c
deleted file mode 100644
index a11ae18..0000000
--- a/arch/ppc/math-emu/frsqrte.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-int
-frsqrte(void *frD, void *frB)
-{
-#ifdef DEBUG
-	printk("%s: %p %p\n", __FUNCTION__, frD, frB);
-#endif
-	return 0;
-}
diff --git a/arch/ppc/math-emu/fsel.c b/arch/ppc/math-emu/fsel.c
deleted file mode 100644
index e36e6e7..0000000
--- a/arch/ppc/math-emu/fsel.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fsel(u32 *frD, void *frA, u32 *frB, u32 *frC)
-{
-	FP_DECL_D(A);
-
-#ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %08x %08x\n", frB[0], frB[1]);
-	printk("C: %08x %08x\n", frC[0], frC[1]);
-#endif
-
-	if (A_c == FP_CLS_NAN || (A_c != FP_CLS_ZERO && A_s)) {
-		frD[0] = frB[0];
-		frD[1] = frB[1];
-	} else {
-		frD[0] = frC[0];
-		frD[1] = frC[1];
-	}
-
-#ifdef DEBUG
-	printk("D: %08x.%08x\n", frD[0], frD[1]);
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/fsqrt.c b/arch/ppc/math-emu/fsqrt.c
deleted file mode 100644
index 6f8319f..0000000
--- a/arch/ppc/math-emu/fsqrt.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fsqrt(void *frD, void *frB)
-{
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
-#endif
-
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-#endif
-
-	if (B_s && B_c != FP_CLS_ZERO)
-		ret |= EFLAG_VXSQRT;
-	if (B_c == FP_CLS_NAN)
-		ret |= EFLAG_VXSNAN;
-
-	FP_SQRT_D(R, B);
-
-#ifdef DEBUG
-	printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_D(frD, R));
-}
diff --git a/arch/ppc/math-emu/fsqrts.c b/arch/ppc/math-emu/fsqrts.c
deleted file mode 100644
index 3b2b1cf..0000000
--- a/arch/ppc/math-emu/fsqrts.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-int
-fsqrts(void *frD, void *frB)
-{
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
-#endif
-
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-#endif
-
-	if (B_s && B_c != FP_CLS_ZERO)
-		ret |= EFLAG_VXSQRT;
-	if (B_c == FP_CLS_NAN)
-		ret |= EFLAG_VXSNAN;
-
-	FP_SQRT_D(R, B);
-
-#ifdef DEBUG
-	printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_DS(frD, R));
-}
diff --git a/arch/ppc/math-emu/fsub.c b/arch/ppc/math-emu/fsub.c
deleted file mode 100644
index 9566790..0000000
--- a/arch/ppc/math-emu/fsub.c
+++ /dev/null
@@ -1,41 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-
-int
-fsub(void *frD, void *frA, void *frB)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-#endif
-
-	if (B_c != FP_CLS_NAN)
-		B_s ^= 1;
-
-	if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
-	FP_ADD_D(R, A, B);
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_D(frD, R));
-}
diff --git a/arch/ppc/math-emu/fsubs.c b/arch/ppc/math-emu/fsubs.c
deleted file mode 100644
index 3428117..0000000
--- a/arch/ppc/math-emu/fsubs.c
+++ /dev/null
@@ -1,42 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-int
-fsubs(void *frD, void *frA, void *frB)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	int ret = 0;
-
-#ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
-#endif
-
-	__FP_UNPACK_D(A, frA);
-	__FP_UNPACK_D(B, frB);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-	printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
-#endif
-
-	if (B_c != FP_CLS_NAN)
-		B_s ^= 1;
-
-	if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF)
-		ret |= EFLAG_VXISI;
-
-	FP_ADD_D(R, A, B);
-
-#ifdef DEBUG
-	printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return (ret | __FP_PACK_DS(frD, R));
-}
diff --git a/arch/ppc/math-emu/lfd.c b/arch/ppc/math-emu/lfd.c
deleted file mode 100644
index 7d38101..0000000
--- a/arch/ppc/math-emu/lfd.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "sfp-machine.h"
-#include "double.h"
-
-int
-lfd(void *frD, void *ea)
-{
-	if (copy_from_user(frD, ea, sizeof(double)))
-		return -EFAULT;
-#ifdef DEBUG
-	printk("%s: D %p, ea %p: ", __FUNCTION__, frD, ea);
-	dump_double(frD);
-	printk("\n");
-#endif
-	return 0;
-}
diff --git a/arch/ppc/math-emu/lfs.c b/arch/ppc/math-emu/lfs.c
deleted file mode 100644
index c86dee3..0000000
--- a/arch/ppc/math-emu/lfs.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-int
-lfs(void *frD, void *ea)
-{
-	FP_DECL_D(R);
-	FP_DECL_S(A);
-	float f;
-
-#ifdef DEBUG
-	printk("%s: D %p, ea %p\n", __FUNCTION__, frD, ea);
-#endif
-
-	if (copy_from_user(&f, ea, sizeof(float)))
-		return -EFAULT;
-
-	__FP_UNPACK_S(A, &f);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %ld (%ld) [%08lx]\n", A_s, A_f, A_e, A_c,
-	       *(unsigned long *)&f);
-#endif
-
-	FP_CONV(D, S, 2, 1, R, A);
-
-#ifdef DEBUG
-	printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
-#endif
-
-	return __FP_PACK_D(frD, R);
-}
diff --git a/arch/ppc/math-emu/math.c b/arch/ppc/math-emu/math.c
deleted file mode 100644
index 5891534..0000000
--- a/arch/ppc/math-emu/math.c
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- * Copyright (C) 1999  Eddie C. Dost  (ecd@atecom.com)
- */
-
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-
-#include <asm/uaccess.h>
-#include <asm/reg.h>
-
-#include "sfp-machine.h"
-#include "double.h"
-
-#define FLOATFUNC(x)	extern int x(void *, void *, void *, void *)
-
-FLOATFUNC(fadd);
-FLOATFUNC(fadds);
-FLOATFUNC(fdiv);
-FLOATFUNC(fdivs);
-FLOATFUNC(fmul);
-FLOATFUNC(fmuls);
-FLOATFUNC(fsub);
-FLOATFUNC(fsubs);
-
-FLOATFUNC(fmadd);
-FLOATFUNC(fmadds);
-FLOATFUNC(fmsub);
-FLOATFUNC(fmsubs);
-FLOATFUNC(fnmadd);
-FLOATFUNC(fnmadds);
-FLOATFUNC(fnmsub);
-FLOATFUNC(fnmsubs);
-
-FLOATFUNC(fctiw);
-FLOATFUNC(fctiwz);
-FLOATFUNC(frsp);
-
-FLOATFUNC(fcmpo);
-FLOATFUNC(fcmpu);
-
-FLOATFUNC(mcrfs);
-FLOATFUNC(mffs);
-FLOATFUNC(mtfsb0);
-FLOATFUNC(mtfsb1);
-FLOATFUNC(mtfsf);
-FLOATFUNC(mtfsfi);
-
-FLOATFUNC(lfd);
-FLOATFUNC(lfs);
-
-FLOATFUNC(stfd);
-FLOATFUNC(stfs);
-FLOATFUNC(stfiwx);
-
-FLOATFUNC(fabs);
-FLOATFUNC(fmr);
-FLOATFUNC(fnabs);
-FLOATFUNC(fneg);
-
-/* Optional */
-FLOATFUNC(fres);
-FLOATFUNC(frsqrte);
-FLOATFUNC(fsel);
-FLOATFUNC(fsqrt);
-FLOATFUNC(fsqrts);
-
-
-#define OP31		0x1f		/*   31 */
-#define LFS		0x30		/*   48 */
-#define LFSU		0x31		/*   49 */
-#define LFD		0x32		/*   50 */
-#define LFDU		0x33		/*   51 */
-#define STFS		0x34		/*   52 */
-#define STFSU		0x35		/*   53 */
-#define STFD		0x36		/*   54 */
-#define STFDU		0x37		/*   55 */
-#define OP59		0x3b		/*   59 */
-#define OP63		0x3f		/*   63 */
-
-/* Opcode 31: */
-/* X-Form: */
-#define LFSX		0x217		/*  535 */
-#define LFSUX		0x237		/*  567 */
-#define LFDX		0x257		/*  599 */
-#define LFDUX		0x277		/*  631 */
-#define STFSX		0x297		/*  663 */
-#define STFSUX		0x2b7		/*  695 */
-#define STFDX		0x2d7		/*  727 */
-#define STFDUX		0x2f7		/*  759 */
-#define STFIWX		0x3d7		/*  983 */
-
-/* Opcode 59: */
-/* A-Form: */
-#define FDIVS		0x012		/*   18 */
-#define FSUBS		0x014		/*   20 */
-#define FADDS		0x015		/*   21 */
-#define FSQRTS		0x016		/*   22 */
-#define FRES		0x018		/*   24 */
-#define FMULS		0x019		/*   25 */
-#define FMSUBS		0x01c		/*   28 */
-#define FMADDS		0x01d		/*   29 */
-#define FNMSUBS		0x01e		/*   30 */
-#define FNMADDS		0x01f		/*   31 */
-
-/* Opcode 63: */
-/* A-Form: */
-#define FDIV		0x012		/*   18 */
-#define FSUB		0x014		/*   20 */
-#define FADD		0x015		/*   21 */
-#define FSQRT		0x016		/*   22 */
-#define FSEL		0x017		/*   23 */
-#define FMUL		0x019		/*   25 */
-#define FRSQRTE		0x01a		/*   26 */
-#define FMSUB		0x01c		/*   28 */
-#define FMADD		0x01d		/*   29 */
-#define FNMSUB		0x01e		/*   30 */
-#define FNMADD		0x01f		/*   31 */
-
-/* X-Form: */
-#define FCMPU		0x000		/*    0	*/
-#define FRSP		0x00c		/*   12 */
-#define FCTIW		0x00e		/*   14 */
-#define FCTIWZ		0x00f		/*   15 */
-#define FCMPO		0x020		/*   32 */
-#define MTFSB1		0x026		/*   38 */
-#define FNEG		0x028		/*   40 */
-#define MCRFS		0x040		/*   64 */
-#define MTFSB0		0x046		/*   70 */
-#define FMR		0x048		/*   72 */
-#define MTFSFI		0x086		/*  134 */
-#define FNABS		0x088		/*  136 */
-#define FABS		0x108		/*  264 */
-#define MFFS		0x247		/*  583 */
-#define MTFSF		0x2c7		/*  711 */
-
-
-#define AB	2
-#define AC	3
-#define ABC	4
-#define D	5
-#define DU	6
-#define X	7
-#define XA	8
-#define XB	9
-#define XCR	11
-#define XCRB	12
-#define XCRI	13
-#define XCRL	16
-#define XE	14
-#define XEU	15
-#define XFLB	10
-
-#ifdef CONFIG_MATH_EMULATION
-static int
-record_exception(struct pt_regs *regs, int eflag)
-{
-	u32 fpscr;
-
-	fpscr = __FPU_FPSCR;
-
-	if (eflag) {
-		fpscr |= FPSCR_FX;
-		if (eflag & EFLAG_OVERFLOW)
-			fpscr |= FPSCR_OX;
-		if (eflag & EFLAG_UNDERFLOW)
-			fpscr |= FPSCR_UX;
-		if (eflag & EFLAG_DIVZERO)
-			fpscr |= FPSCR_ZX;
-		if (eflag & EFLAG_INEXACT)
-			fpscr |= FPSCR_XX;
-		if (eflag & EFLAG_VXSNAN)
-			fpscr |= FPSCR_VXSNAN;
-		if (eflag & EFLAG_VXISI)
-			fpscr |= FPSCR_VXISI;
-		if (eflag & EFLAG_VXIDI)
-			fpscr |= FPSCR_VXIDI;
-		if (eflag & EFLAG_VXZDZ)
-			fpscr |= FPSCR_VXZDZ;
-		if (eflag & EFLAG_VXIMZ)
-			fpscr |= FPSCR_VXIMZ;
-		if (eflag & EFLAG_VXVC)
-			fpscr |= FPSCR_VXVC;
-		if (eflag & EFLAG_VXSOFT)
-			fpscr |= FPSCR_VXSOFT;
-		if (eflag & EFLAG_VXSQRT)
-			fpscr |= FPSCR_VXSQRT;
-		if (eflag & EFLAG_VXCVI)
-			fpscr |= FPSCR_VXCVI;
-	}
-
-	fpscr &= ~(FPSCR_VX);
-	if (fpscr & (FPSCR_VXSNAN | FPSCR_VXISI | FPSCR_VXIDI |
-		     FPSCR_VXZDZ | FPSCR_VXIMZ | FPSCR_VXVC |
-		     FPSCR_VXSOFT | FPSCR_VXSQRT | FPSCR_VXCVI))
-		fpscr |= FPSCR_VX;
-
-	fpscr &= ~(FPSCR_FEX);
-	if (((fpscr & FPSCR_VX) && (fpscr & FPSCR_VE)) ||
-	    ((fpscr & FPSCR_OX) && (fpscr & FPSCR_OE)) ||
-	    ((fpscr & FPSCR_UX) && (fpscr & FPSCR_UE)) ||
-	    ((fpscr & FPSCR_ZX) && (fpscr & FPSCR_ZE)) ||
-	    ((fpscr & FPSCR_XX) && (fpscr & FPSCR_XE)))
-		fpscr |= FPSCR_FEX;
-
-	__FPU_FPSCR = fpscr;
-
-	return (fpscr & FPSCR_FEX) ? 1 : 0;
-}
-#endif /* CONFIG_MATH_EMULATION */
-
-int
-do_mathemu(struct pt_regs *regs)
-{
-	void *op0 = 0, *op1 = 0, *op2 = 0, *op3 = 0;
-	unsigned long pc = regs->nip;
-	signed short sdisp;
-	u32 insn = 0;
-	int idx = 0;
-#ifdef CONFIG_MATH_EMULATION
-	int (*func)(void *, void *, void *, void *);
-	int type = 0;
-	int eflag, trap;
-#endif
-
-	if (get_user(insn, (u32 *)pc))
-		return -EFAULT;
-
-#ifndef CONFIG_MATH_EMULATION
-	switch (insn >> 26) {
-	case LFD:
-		idx = (insn >> 16) & 0x1f;
-		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
-		lfd(op0, op1, op2, op3);
-		break;
-	case LFDU:
-		idx = (insn >> 16) & 0x1f;
-		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
-		lfd(op0, op1, op2, op3);
-		regs->gpr[idx] = (unsigned long)op1;
-		break;
-	case STFD:
-		idx = (insn >> 16) & 0x1f;
-		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
-		stfd(op0, op1, op2, op3);
-		break;
-	case STFDU:
-		idx = (insn >> 16) & 0x1f;
-		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
-		stfd(op0, op1, op2, op3);
-		regs->gpr[idx] = (unsigned long)op1;
-		break;
-	case OP63:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
-		fmr(op0, op1, op2, op3);
-		break;
-	default:
-		goto illegal;
-	}
-#else /* CONFIG_MATH_EMULATION */
-	switch (insn >> 26) {
-	case LFS:	func = lfs;	type = D;	break;
-	case LFSU:	func = lfs;	type = DU;	break;
-	case LFD:	func = lfd;	type = D;	break;
-	case LFDU:	func = lfd;	type = DU;	break;
-	case STFS:	func = stfs;	type = D;	break;
-	case STFSU:	func = stfs;	type = DU;	break;
-	case STFD:	func = stfd;	type = D;	break;
-	case STFDU:	func = stfd;	type = DU;	break;
-
-	case OP31:
-		switch ((insn >> 1) & 0x3ff) {
-		case LFSX:	func = lfs;	type = XE;	break;
-		case LFSUX:	func = lfs;	type = XEU;	break;
-		case LFDX:	func = lfd;	type = XE;	break;
-		case LFDUX:	func = lfd;	type = XEU;	break;
-		case STFSX:	func = stfs;	type = XE;	break;
-		case STFSUX:	func = stfs;	type = XEU;	break;
-		case STFDX:	func = stfd;	type = XE;	break;
-		case STFDUX:	func = stfd;	type = XEU;	break;
-		case STFIWX:	func = stfiwx;	type = XE;	break;
-		default:
-			goto illegal;
-		}
-		break;
-
-	case OP59:
-		switch ((insn >> 1) & 0x1f) {
-		case FDIVS:	func = fdivs;	type = AB;	break;
-		case FSUBS:	func = fsubs;	type = AB;	break;
-		case FADDS:	func = fadds;	type = AB;	break;
-		case FSQRTS:	func = fsqrts;	type = AB;	break;
-		case FRES:	func = fres;	type = AB;	break;
-		case FMULS:	func = fmuls;	type = AC;	break;
-		case FMSUBS:	func = fmsubs;	type = ABC;	break;
-		case FMADDS:	func = fmadds;	type = ABC;	break;
-		case FNMSUBS:	func = fnmsubs;	type = ABC;	break;
-		case FNMADDS:	func = fnmadds;	type = ABC;	break;
-		default:
-			goto illegal;
-		}
-		break;
-
-	case OP63:
-		if (insn & 0x20) {
-			switch ((insn >> 1) & 0x1f) {
-			case FDIV:	func = fdiv;	type = AB;	break;
-			case FSUB:	func = fsub;	type = AB;	break;
-			case FADD:	func = fadd;	type = AB;	break;
-			case FSQRT:	func = fsqrt;	type = AB;	break;
-			case FSEL:	func = fsel;	type = ABC;	break;
-			case FMUL:	func = fmul;	type = AC;	break;
-			case FRSQRTE:	func = frsqrte;	type = AB;	break;
-			case FMSUB:	func = fmsub;	type = ABC;	break;
-			case FMADD:	func = fmadd;	type = ABC;	break;
-			case FNMSUB:	func = fnmsub;	type = ABC;	break;
-			case FNMADD:	func = fnmadd;	type = ABC;	break;
-			default:
-				goto illegal;
-			}
-			break;
-		}
-
-		switch ((insn >> 1) & 0x3ff) {
-		case FCMPU:	func = fcmpu;	type = XCR;	break;
-		case FRSP:	func = frsp;	type = XB;	break;
-		case FCTIW:	func = fctiw;	type = XB;	break;
-		case FCTIWZ:	func = fctiwz;	type = XB;	break;
-		case FCMPO:	func = fcmpo;	type = XCR;	break;
-		case MTFSB1:	func = mtfsb1;	type = XCRB;	break;
-		case FNEG:	func = fneg;	type = XB;	break;
-		case MCRFS:	func = mcrfs;	type = XCRL;	break;
-		case MTFSB0:	func = mtfsb0;	type = XCRB;	break;
-		case FMR:	func = fmr;	type = XB;	break;
-		case MTFSFI:	func = mtfsfi;	type = XCRI;	break;
-		case FNABS:	func = fnabs;	type = XB;	break;
-		case FABS:	func = fabs;	type = XB;	break;
-		case MFFS:	func = mffs;	type = X;	break;
-		case MTFSF:	func = mtfsf;	type = XFLB;	break;
-		default:
-			goto illegal;
-		}
-		break;
-
-	default:
-		goto illegal;
-	}
-
-	switch (type) {
-	case AB:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op2 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
-		break;
-
-	case AC:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op2 = (void *)&current->thread.fpr[(insn >>  6) & 0x1f];
-		break;
-
-	case ABC:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op2 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
-		op3 = (void *)&current->thread.fpr[(insn >>  6) & 0x1f];
-		break;
-
-	case D:
-		idx = (insn >> 16) & 0x1f;
-		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
-		break;
-
-	case DU:
-		idx = (insn >> 16) & 0x1f;
-		if (!idx)
-			goto illegal;
-
-		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)(regs->gpr[idx] + sdisp);
-		break;
-
-	case X:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		break;
-
-	case XA:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		break;
-
-	case XB:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
-		break;
-
-	case XE:
-		idx = (insn >> 16) & 0x1f;
-		if (!idx)
-			goto illegal;
-
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)(regs->gpr[idx] + regs->gpr[(insn >> 11) & 0x1f]);
-		break;
-
-	case XEU:
-		idx = (insn >> 16) & 0x1f;
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)((idx ? regs->gpr[idx] : 0)
-				+ regs->gpr[(insn >> 11) & 0x1f]);
-		break;
-
-	case XCR:
-		op0 = (void *)&regs->ccr;
-		op1 = (void *)((insn >> 23) & 0x7);
-		op2 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op3 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
-		break;
-
-	case XCRL:
-		op0 = (void *)&regs->ccr;
-		op1 = (void *)((insn >> 23) & 0x7);
-		op2 = (void *)((insn >> 18) & 0x7);
-		break;
-
-	case XCRB:
-		op0 = (void *)((insn >> 21) & 0x1f);
-		break;
-
-	case XCRI:
-		op0 = (void *)((insn >> 23) & 0x7);
-		op1 = (void *)((insn >> 12) & 0xf);
-		break;
-
-	case XFLB:
-		op0 = (void *)((insn >> 17) & 0xff);
-		op1 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
-		break;
-
-	default:
-		goto illegal;
-	}
-
-	eflag = func(op0, op1, op2, op3);
-
-	if (insn & 1) {
-		regs->ccr &= ~(0x0f000000);
-		regs->ccr |= (__FPU_FPSCR >> 4) & 0x0f000000;
-	}
-
-	trap = record_exception(regs, eflag);
-	if (trap)
-		return 1;
-
-	switch (type) {
-	case DU:
-	case XEU:
-		regs->gpr[idx] = (unsigned long)op1;
-		break;
-
-	default:
-		break;
-	}
-#endif /* CONFIG_MATH_EMULATION */
-
-	regs->nip += 4;
-	return 0;
-
-illegal:
-	return -ENOSYS;
-}
diff --git a/arch/ppc/math-emu/mcrfs.c b/arch/ppc/math-emu/mcrfs.c
deleted file mode 100644
index 106dd91..0000000
--- a/arch/ppc/math-emu/mcrfs.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-
-int
-mcrfs(u32 *ccr, u32 crfD, u32 crfS)
-{
-	u32 value, clear;
-
-#ifdef DEBUG
-	printk("%s: %p (%08x) %d %d\n", __FUNCTION__, ccr, *ccr, crfD, crfS);
-#endif
-
-	clear = 15 << ((7 - crfS) << 2);
-	if (!crfS)
-		clear = 0x90000000;
-
-	value = (__FPU_FPSCR >> ((7 - crfS) << 2)) & 15;
-	__FPU_FPSCR &= ~(clear);
-
-	*ccr &= ~(15 << ((7 - crfD) << 2));
-	*ccr |= (value << ((7 - crfD) << 2));
-
-#ifdef DEBUG
-	printk("CR: %08x\n", __FUNCTION__, *ccr);
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/mffs.c b/arch/ppc/math-emu/mffs.c
deleted file mode 100644
index f477c91..0000000
--- a/arch/ppc/math-emu/mffs.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-
-int
-mffs(u32 *frD)
-{
-	frD[1] = __FPU_FPSCR;
-
-#ifdef DEBUG
-	printk("%s: frD %p: %08x.%08x\n", __FUNCTION__, frD, frD[0], frD[1]);
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/mtfsb0.c b/arch/ppc/math-emu/mtfsb0.c
deleted file mode 100644
index 99bfd80..0000000
--- a/arch/ppc/math-emu/mtfsb0.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-
-int
-mtfsb0(int crbD)
-{
-	if ((crbD != 1) && (crbD != 2))
-		__FPU_FPSCR &= ~(1 << (31 - crbD));
-
-#ifdef DEBUG
-	printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/mtfsb1.c b/arch/ppc/math-emu/mtfsb1.c
deleted file mode 100644
index 3d9e7ed..0000000
--- a/arch/ppc/math-emu/mtfsb1.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-
-int
-mtfsb1(int crbD)
-{
-	if ((crbD != 1) && (crbD != 2))
-		__FPU_FPSCR |= (1 << (31 - crbD));
-
-#ifdef DEBUG
-	printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/mtfsf.c b/arch/ppc/math-emu/mtfsf.c
deleted file mode 100644
index d70cf71..0000000
--- a/arch/ppc/math-emu/mtfsf.c
+++ /dev/null
@@ -1,45 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-
-int
-mtfsf(unsigned int FM, u32 *frB)
-{
-	u32 mask;
-
-	if (FM == 0)
-		return 0;
-
-	if (FM == 0xff)
-		mask = 0x9fffffff;
-	else {
-		mask = 0;
-		if (FM & (1 << 0))
-			mask |= 0x90000000;
-		if (FM & (1 << 1))
-			mask |= 0x0f000000;
-		if (FM & (1 << 2))
-			mask |= 0x00f00000;
-		if (FM & (1 << 3))
-			mask |= 0x000f0000;
-		if (FM & (1 << 4))
-			mask |= 0x0000f000;
-		if (FM & (1 << 5))
-			mask |= 0x00000f00;
-		if (FM & (1 << 6))
-			mask |= 0x000000f0;
-		if (FM & (1 << 7))
-			mask |= 0x0000000f;
-	}
-
-	__FPU_FPSCR &= ~(mask);
-	__FPU_FPSCR |= (frB[1] & mask);
-
-#ifdef DEBUG
-	printk("%s: %02x %p: %08lx\n", __FUNCTION__, FM, frB, __FPU_FPSCR);
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/mtfsfi.c b/arch/ppc/math-emu/mtfsfi.c
deleted file mode 100644
index 71df854..0000000
--- a/arch/ppc/math-emu/mtfsfi.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-
-int
-mtfsfi(unsigned int crfD, unsigned int IMM)
-{
-	u32 mask = 0xf;
-
-	if (!crfD)
-		mask = 9;
-
-	__FPU_FPSCR &= ~(mask << ((7 - crfD) << 2));
-	__FPU_FPSCR |= (IMM & 0xf) << ((7 - crfD) << 2);
-
-#ifdef DEBUG
-	printk("%s: %d %x: %08lx\n", __FUNCTION__, crfD, IMM, __FPU_FPSCR);
-#endif
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/op-1.h b/arch/ppc/math-emu/op-1.h
deleted file mode 100644
index c92fa95..0000000
--- a/arch/ppc/math-emu/op-1.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * Basic one-word fraction declaration and manipulation.
- */
-
-#define _FP_FRAC_DECL_1(X)	_FP_W_TYPE X##_f
-#define _FP_FRAC_COPY_1(D,S)	(D##_f = S##_f)
-#define _FP_FRAC_SET_1(X,I)	(X##_f = I)
-#define _FP_FRAC_HIGH_1(X)	(X##_f)
-#define _FP_FRAC_LOW_1(X)	(X##_f)
-#define _FP_FRAC_WORD_1(X,w)	(X##_f)
-
-#define _FP_FRAC_ADDI_1(X,I)	(X##_f += I)
-#define _FP_FRAC_SLL_1(X,N)			\
-  do {						\
-    if (__builtin_constant_p(N) && (N) == 1)	\
-      X##_f += X##_f;				\
-    else					\
-      X##_f <<= (N);				\
-  } while (0)
-#define _FP_FRAC_SRL_1(X,N)	(X##_f >>= N)
-
-/* Right shift with sticky-lsb.  */
-#define _FP_FRAC_SRS_1(X,N,sz)	__FP_FRAC_SRS_1(X##_f, N, sz)
-
-#define __FP_FRAC_SRS_1(X,N,sz)						\
-   (X = (X >> (N) | (__builtin_constant_p(N) && (N) == 1		\
-		     ? X & 1 : (X << (_FP_W_TYPE_SIZE - (N))) != 0)))
-
-#define _FP_FRAC_ADD_1(R,X,Y)	(R##_f = X##_f + Y##_f)
-#define _FP_FRAC_SUB_1(R,X,Y)	(R##_f = X##_f - Y##_f)
-#define _FP_FRAC_CLZ_1(z, X)	__FP_CLZ(z, X##_f)
-
-/* Predicates */
-#define _FP_FRAC_NEGP_1(X)	((_FP_WS_TYPE)X##_f < 0)
-#define _FP_FRAC_ZEROP_1(X)	(X##_f == 0)
-#define _FP_FRAC_OVERP_1(fs,X)	(X##_f & _FP_OVERFLOW_##fs)
-#define _FP_FRAC_EQ_1(X, Y)	(X##_f == Y##_f)
-#define _FP_FRAC_GE_1(X, Y)	(X##_f >= Y##_f)
-#define _FP_FRAC_GT_1(X, Y)	(X##_f > Y##_f)
-
-#define _FP_ZEROFRAC_1		0
-#define _FP_MINFRAC_1		1
-
-/*
- * Unpack the raw bits of a native fp value.  Do not classify or
- * normalize the data.
- */
-
-#define _FP_UNPACK_RAW_1(fs, X, val)				\
-  do {								\
-    union _FP_UNION_##fs _flo; _flo.flt = (val);		\
-								\
-    X##_f = _flo.bits.frac;					\
-    X##_e = _flo.bits.exp;					\
-    X##_s = _flo.bits.sign;					\
-  } while (0)
-
-
-/*
- * Repack the raw bits of a native fp value.
- */
-
-#define _FP_PACK_RAW_1(fs, val, X)				\
-  do {								\
-    union _FP_UNION_##fs _flo;					\
-								\
-    _flo.bits.frac = X##_f;					\
-    _flo.bits.exp  = X##_e;					\
-    _flo.bits.sign = X##_s;					\
-								\
-    (val) = _flo.flt;						\
-  } while (0)
-
-
-/*
- * Multiplication algorithms:
- */
-
-/* Basic.  Assuming the host word size is >= 2*FRACBITS, we can do the
-   multiplication immediately.  */
-
-#define _FP_MUL_MEAT_1_imm(fs, R, X, Y)					\
-  do {									\
-    R##_f = X##_f * Y##_f;						\
-    /* Normalize since we know where the msb of the multiplicands	\
-       were (bit B), we know that the msb of the of the product is	\
-       at either 2B or 2B-1.  */					\
-    _FP_FRAC_SRS_1(R, _FP_WFRACBITS_##fs-1, 2*_FP_WFRACBITS_##fs);	\
-  } while (0)
-
-/* Given a 1W * 1W => 2W primitive, do the extended multiplication.  */
-
-#define _FP_MUL_MEAT_1_wide(fs, R, X, Y, doit)				\
-  do {									\
-    _FP_W_TYPE _Z_f0, _Z_f1;						\
-    doit(_Z_f1, _Z_f0, X##_f, Y##_f);					\
-    /* Normalize since we know where the msb of the multiplicands	\
-       were (bit B), we know that the msb of the of the product is	\
-       at either 2B or 2B-1.  */					\
-    _FP_FRAC_SRS_2(_Z, _FP_WFRACBITS_##fs-1, 2*_FP_WFRACBITS_##fs);	\
-    R##_f = _Z_f0;							\
-  } while (0)
-
-/* Finally, a simple widening multiply algorithm.  What fun!  */
-
-#define _FP_MUL_MEAT_1_hard(fs, R, X, Y)				\
-  do {									\
-    _FP_W_TYPE _xh, _xl, _yh, _yl, _z_f0, _z_f1, _a_f0, _a_f1;		\
-									\
-    /* split the words in half */					\
-    _xh = X##_f >> (_FP_W_TYPE_SIZE/2);					\
-    _xl = X##_f & (((_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2)) - 1);		\
-    _yh = Y##_f >> (_FP_W_TYPE_SIZE/2);					\
-    _yl = Y##_f & (((_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2)) - 1);		\
-									\
-    /* multiply the pieces */						\
-    _z_f0 = _xl * _yl;							\
-    _a_f0 = _xh * _yl;							\
-    _a_f1 = _xl * _yh;							\
-    _z_f1 = _xh * _yh;							\
-									\
-    /* reassemble into two full words */				\
-    if ((_a_f0 += _a_f1) < _a_f1)					\
-      _z_f1 += (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE/2);			\
-    _a_f1 = _a_f0 >> (_FP_W_TYPE_SIZE/2);				\
-    _a_f0 = _a_f0 << (_FP_W_TYPE_SIZE/2);				\
-    _FP_FRAC_ADD_2(_z, _z, _a);						\
-									\
-    /* normalize */							\
-    _FP_FRAC_SRS_2(_z, _FP_WFRACBITS_##fs - 1, 2*_FP_WFRACBITS_##fs);	\
-    R##_f = _z_f0;							\
-  } while (0)
-
-
-/*
- * Division algorithms:
- */
-
-/* Basic.  Assuming the host word size is >= 2*FRACBITS, we can do the
-   division immediately.  Give this macro either _FP_DIV_HELP_imm for
-   C primitives or _FP_DIV_HELP_ldiv for the ISO function.  Which you
-   choose will depend on what the compiler does with divrem4.  */
-
-#define _FP_DIV_MEAT_1_imm(fs, R, X, Y, doit)		\
-  do {							\
-    _FP_W_TYPE _q, _r;					\
-    X##_f <<= (X##_f < Y##_f				\
-	       ? R##_e--, _FP_WFRACBITS_##fs		\
-	       : _FP_WFRACBITS_##fs - 1);		\
-    doit(_q, _r, X##_f, Y##_f);				\
-    R##_f = _q | (_r != 0);				\
-  } while (0)
-
-/* GCC's longlong.h defines a 2W / 1W => (1W,1W) primitive udiv_qrnnd
-   that may be useful in this situation.  This first is for a primitive
-   that requires normalization, the second for one that does not.  Look
-   for UDIV_NEEDS_NORMALIZATION to tell which your machine needs.  */
-
-#define _FP_DIV_MEAT_1_udiv_norm(fs, R, X, Y)				\
-  do {									\
-    _FP_W_TYPE _nh, _nl, _q, _r;					\
-									\
-    /* Normalize Y -- i.e. make the most significant bit set.  */	\
-    Y##_f <<= _FP_WFRACXBITS_##fs - 1;					\
-									\
-    /* Shift X op correspondingly high, that is, up one full word.  */	\
-    if (X##_f <= Y##_f)							\
-      {									\
-	_nl = 0;							\
-	_nh = X##_f;							\
-      }									\
-    else								\
-      {									\
-	R##_e++;							\
-	_nl = X##_f << (_FP_W_TYPE_SIZE-1);				\
-	_nh = X##_f >> 1;						\
-      }									\
-    									\
-    udiv_qrnnd(_q, _r, _nh, _nl, Y##_f);				\
-    R##_f = _q | (_r != 0);						\
-  } while (0)
-
-#define _FP_DIV_MEAT_1_udiv(fs, R, X, Y)		\
-  do {							\
-    _FP_W_TYPE _nh, _nl, _q, _r;			\
-    if (X##_f < Y##_f)					\
-      {							\
-	R##_e--;					\
-	_nl = X##_f << _FP_WFRACBITS_##fs;		\
-	_nh = X##_f >> _FP_WFRACXBITS_##fs;		\
-      }							\
-    else						\
-      {							\
-	_nl = X##_f << (_FP_WFRACBITS_##fs - 1);	\
-	_nh = X##_f >> (_FP_WFRACXBITS_##fs + 1);	\
-      }							\
-    udiv_qrnnd(_q, _r, _nh, _nl, Y##_f);		\
-    R##_f = _q | (_r != 0);				\
-  } while (0)
-
-
-/*
- * Square root algorithms:
- * We have just one right now, maybe Newton approximation
- * should be added for those machines where division is fast.
- */
-
-#define _FP_SQRT_MEAT_1(R, S, T, X, q)			\
-  do {							\
-    while (q)						\
-      {							\
-        T##_f = S##_f + q;				\
-        if (T##_f <= X##_f)				\
-          {						\
-            S##_f = T##_f + q;				\
-            X##_f -= T##_f;				\
-            R##_f += q;					\
-          }						\
-        _FP_FRAC_SLL_1(X, 1);				\
-        q >>= 1;					\
-      }							\
-  } while (0)
-
-/*
- * Assembly/disassembly for converting to/from integral types.
- * No shifting or overflow handled here.
- */
-
-#define _FP_FRAC_ASSEMBLE_1(r, X, rsize)	(r = X##_f)
-#define _FP_FRAC_DISASSEMBLE_1(X, r, rsize)	(X##_f = r)
-
-
-/*
- * Convert FP values between word sizes
- */
-
-#define _FP_FRAC_CONV_1_1(dfs, sfs, D, S)				\
-  do {									\
-    D##_f = S##_f;							\
-    if (_FP_WFRACBITS_##sfs > _FP_WFRACBITS_##dfs)			\
-      _FP_FRAC_SRS_1(D, (_FP_WFRACBITS_##sfs-_FP_WFRACBITS_##dfs),	\
-		     _FP_WFRACBITS_##sfs);				\
-    else								\
-      D##_f <<= _FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs;		\
-  } while (0)
diff --git a/arch/ppc/math-emu/op-2.h b/arch/ppc/math-emu/op-2.h
deleted file mode 100644
index b9b06b4..0000000
--- a/arch/ppc/math-emu/op-2.h
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * Basic two-word fraction declaration and manipulation.
- */
-
-#define _FP_FRAC_DECL_2(X)	_FP_W_TYPE X##_f0, X##_f1
-#define _FP_FRAC_COPY_2(D,S)	(D##_f0 = S##_f0, D##_f1 = S##_f1)
-#define _FP_FRAC_SET_2(X,I)	__FP_FRAC_SET_2(X, I)
-#define _FP_FRAC_HIGH_2(X)	(X##_f1)
-#define _FP_FRAC_LOW_2(X)	(X##_f0)
-#define _FP_FRAC_WORD_2(X,w)	(X##_f##w)
-
-#define _FP_FRAC_SLL_2(X,N)						\
-  do {									\
-    if ((N) < _FP_W_TYPE_SIZE)						\
-      {									\
-        if (__builtin_constant_p(N) && (N) == 1) 			\
-          {								\
-            X##_f1 = X##_f1 + X##_f1 + (((_FP_WS_TYPE)(X##_f0)) < 0);	\
-            X##_f0 += X##_f0;						\
-          }								\
-        else								\
-          {								\
-	    X##_f1 = X##_f1 << (N) | X##_f0 >> (_FP_W_TYPE_SIZE - (N));	\
-	    X##_f0 <<= (N);						\
-	  }								\
-      }									\
-    else								\
-      {									\
-	X##_f1 = X##_f0 << ((N) - _FP_W_TYPE_SIZE);			\
-	X##_f0 = 0;							\
-      }									\
-  } while (0)
-
-#define _FP_FRAC_SRL_2(X,N)						\
-  do {									\
-    if ((N) < _FP_W_TYPE_SIZE)						\
-      {									\
-	X##_f0 = X##_f0 >> (N) | X##_f1 << (_FP_W_TYPE_SIZE - (N));	\
-	X##_f1 >>= (N);							\
-      }									\
-    else								\
-      {									\
-	X##_f0 = X##_f1 >> ((N) - _FP_W_TYPE_SIZE);			\
-	X##_f1 = 0;							\
-      }									\
-  } while (0)
-
-/* Right shift with sticky-lsb.  */
-#define _FP_FRAC_SRS_2(X,N,sz)						\
-  do {									\
-    if ((N) < _FP_W_TYPE_SIZE)						\
-      {									\
-	X##_f0 = (X##_f1 << (_FP_W_TYPE_SIZE - (N)) | X##_f0 >> (N) |	\
-		  (__builtin_constant_p(N) && (N) == 1			\
-		   ? X##_f0 & 1						\
-		   : (X##_f0 << (_FP_W_TYPE_SIZE - (N))) != 0));	\
-	X##_f1 >>= (N);							\
-      }									\
-    else								\
-      {									\
-	X##_f0 = (X##_f1 >> ((N) - _FP_W_TYPE_SIZE) |			\
-	          (((X##_f1 << (sz - (N))) | X##_f0) != 0));		\
-	X##_f1 = 0;							\
-      }									\
-  } while (0)
-
-#define _FP_FRAC_ADDI_2(X,I) \
-  __FP_FRAC_ADDI_2(X##_f1, X##_f0, I)
-
-#define _FP_FRAC_ADD_2(R,X,Y) \
-  __FP_FRAC_ADD_2(R##_f1, R##_f0, X##_f1, X##_f0, Y##_f1, Y##_f0)
-
-#define _FP_FRAC_SUB_2(R,X,Y) \
-  __FP_FRAC_SUB_2(R##_f1, R##_f0, X##_f1, X##_f0, Y##_f1, Y##_f0)
-
-#define _FP_FRAC_CLZ_2(R,X)	\
-  do {				\
-    if (X##_f1)			\
-      __FP_CLZ(R,X##_f1);	\
-    else 			\
-    {				\
-      __FP_CLZ(R,X##_f0);	\
-      R += _FP_W_TYPE_SIZE;	\
-    }				\
-  } while(0)
-
-/* Predicates */
-#define _FP_FRAC_NEGP_2(X)	((_FP_WS_TYPE)X##_f1 < 0)
-#define _FP_FRAC_ZEROP_2(X)	((X##_f1 | X##_f0) == 0)
-#define _FP_FRAC_OVERP_2(fs,X)	(X##_f1 & _FP_OVERFLOW_##fs)
-#define _FP_FRAC_EQ_2(X, Y)	(X##_f1 == Y##_f1 && X##_f0 == Y##_f0)
-#define _FP_FRAC_GT_2(X, Y)	\
-  ((X##_f1 > Y##_f1) || (X##_f1 == Y##_f1 && X##_f0 > Y##_f0))
-#define _FP_FRAC_GE_2(X, Y)	\
-  ((X##_f1 > Y##_f1) || (X##_f1 == Y##_f1 && X##_f0 >= Y##_f0))
-
-#define _FP_ZEROFRAC_2		0, 0
-#define _FP_MINFRAC_2		0, 1
-
-/*
- * Internals
- */
-
-#define __FP_FRAC_SET_2(X,I1,I0)	(X##_f0 = I0, X##_f1 = I1)
-
-#define __FP_CLZ_2(R, xh, xl)	\
-  do {				\
-    if (xh)			\
-      __FP_CLZ(R,xl);		\
-    else 			\
-    {				\
-      __FP_CLZ(R,xl);		\
-      R += _FP_W_TYPE_SIZE;	\
-    }				\
-  } while(0)
-
-#if 0
-
-#ifndef __FP_FRAC_ADDI_2
-#define __FP_FRAC_ADDI_2(xh, xl, i) \
-  (xh += ((xl += i) < i))
-#endif
-#ifndef __FP_FRAC_ADD_2
-#define __FP_FRAC_ADD_2(rh, rl, xh, xl, yh, yl) \
-  (rh = xh + yh + ((rl = xl + yl) < xl))
-#endif
-#ifndef __FP_FRAC_SUB_2
-#define __FP_FRAC_SUB_2(rh, rl, xh, xl, yh, yl) \
-  (rh = xh - yh - ((rl = xl - yl) > xl))
-#endif
-
-#else
-
-#undef __FP_FRAC_ADDI_2
-#define __FP_FRAC_ADDI_2(xh, xl, i)	add_ssaaaa(xh, xl, xh, xl, 0, i)
-#undef __FP_FRAC_ADD_2
-#define __FP_FRAC_ADD_2			add_ssaaaa
-#undef __FP_FRAC_SUB_2
-#define __FP_FRAC_SUB_2			sub_ddmmss
-
-#endif
-
-/*
- * Unpack the raw bits of a native fp value.  Do not classify or
- * normalize the data.
- */
-
-#define _FP_UNPACK_RAW_2(fs, X, val)			\
-  do {							\
-    union _FP_UNION_##fs _flo; _flo.flt = (val);	\
-							\
-    X##_f0 = _flo.bits.frac0;				\
-    X##_f1 = _flo.bits.frac1;				\
-    X##_e  = _flo.bits.exp;				\
-    X##_s  = _flo.bits.sign;				\
-  } while (0)
-
-
-/*
- * Repack the raw bits of a native fp value.
- */
-
-#define _FP_PACK_RAW_2(fs, val, X)			\
-  do {							\
-    union _FP_UNION_##fs _flo;				\
-							\
-    _flo.bits.frac0 = X##_f0;				\
-    _flo.bits.frac1 = X##_f1;				\
-    _flo.bits.exp   = X##_e;				\
-    _flo.bits.sign  = X##_s;				\
-							\
-    (val) = _flo.flt;					\
-  } while (0)
-
-
-/*
- * Multiplication algorithms:
- */
-
-/* Given a 1W * 1W => 2W primitive, do the extended multiplication.  */
-
-#define _FP_MUL_MEAT_2_wide(fs, R, X, Y, doit)				\
-  do {									\
-    _FP_FRAC_DECL_4(_z); _FP_FRAC_DECL_2(_b); _FP_FRAC_DECL_2(_c);	\
-									\
-    doit(_FP_FRAC_WORD_4(_z,1), _FP_FRAC_WORD_4(_z,0), X##_f0, Y##_f0); \
-    doit(_b_f1, _b_f0, X##_f0, Y##_f1);					\
-    doit(_c_f1, _c_f0, X##_f1, Y##_f0);					\
-    doit(_FP_FRAC_WORD_4(_z,3), _FP_FRAC_WORD_4(_z,2), X##_f1, Y##_f1); \
-									\
-    __FP_FRAC_ADD_4(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
-		    _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0),	\
-		    0, _b_f1, _b_f0, 0,					\
-		    _FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
-		    _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0));	\
-    __FP_FRAC_ADD_4(_FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
-		    _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0),	\
-		    0, _c_f1, _c_f0, 0,					\
-		    _FP_FRAC_WORD_4(_z,3),_FP_FRAC_WORD_4(_z,2),	\
-		    _FP_FRAC_WORD_4(_z,1),_FP_FRAC_WORD_4(_z,0));	\
-									\
-    /* Normalize since we know where the msb of the multiplicands	\
-       were (bit B), we know that the msb of the of the product is	\
-       at either 2B or 2B-1.  */					\
-    _FP_FRAC_SRS_4(_z, _FP_WFRACBITS_##fs-1, 2*_FP_WFRACBITS_##fs);	\
-    R##_f0 = _FP_FRAC_WORD_4(_z,0);					\
-    R##_f1 = _FP_FRAC_WORD_4(_z,1);					\
-  } while (0)
-
-/* This next macro appears to be totally broken. Fortunately nowhere
- * seems to use it :-> The problem is that we define _z[4] but
- * then use it in _FP_FRAC_SRS_4, which will attempt to access
- * _z_f[n] which will cause an error. The fix probably involves
- * declaring it with _FP_FRAC_DECL_4, see previous macro. -- PMM 02/1998
- */
-#define _FP_MUL_MEAT_2_gmp(fs, R, X, Y)					\
-  do {									\
-    _FP_W_TYPE _x[2], _y[2], _z[4];					\
-    _x[0] = X##_f0; _x[1] = X##_f1;					\
-    _y[0] = Y##_f0; _y[1] = Y##_f1;					\
-									\
-    mpn_mul_n(_z, _x, _y, 2);						\
-									\
-    /* Normalize since we know where the msb of the multiplicands	\
-       were (bit B), we know that the msb of the of the product is	\
-       at either 2B or 2B-1.  */					\
-    _FP_FRAC_SRS_4(_z, _FP_WFRACBITS##_fs-1, 2*_FP_WFRACBITS_##fs);	\
-    R##_f0 = _z[0];							\
-    R##_f1 = _z[1];							\
-  } while (0)
-
-
-/*
- * Division algorithms:
- * This seems to be giving me difficulties -- PMM
- * Look, NetBSD seems to be able to comment algorithms. Can't you?
- * I've thrown printks at the problem.
- * This now appears to work, but I still don't really know why.
- * Also, I don't think the result is properly normalised...
- */
-
-#define _FP_DIV_MEAT_2_udiv_64(fs, R, X, Y)				\
-  do {									\
-    extern void _fp_udivmodti4(_FP_W_TYPE q[2], _FP_W_TYPE r[2],	\
-			       _FP_W_TYPE n1, _FP_W_TYPE n0,		\
-			       _FP_W_TYPE d1, _FP_W_TYPE d0);		\
-    _FP_W_TYPE _n_f3, _n_f2, _n_f1, _n_f0, _r_f1, _r_f0;		\
-    _FP_W_TYPE _q_f1, _q_f0, _m_f1, _m_f0;				\
-    _FP_W_TYPE _rmem[2], _qmem[2];					\
-    /* I think this check is to ensure that the result is normalised.   \
-     * Assuming X,Y normalised (ie in [1.0,2.0)) X/Y will be in         \
-     * [0.5,2.0). Furthermore, it will be less than 1.0 iff X < Y.      \
-     * In this case we tweak things. (this is based on comments in      \
-     * the NetBSD FPU emulation code. )                                 \
-     * We know X,Y are normalised because we ensure this as part of     \
-     * the unpacking process. -- PMM                                    \
-     */									\
-    if (_FP_FRAC_GT_2(X, Y))						\
-      {									\
-/*	R##_e++; */							\
-	_n_f3 = X##_f1 >> 1;						\
-	_n_f2 = X##_f1 << (_FP_W_TYPE_SIZE - 1) | X##_f0 >> 1;		\
-	_n_f1 = X##_f0 << (_FP_W_TYPE_SIZE - 1);			\
-	_n_f0 = 0;							\
-      }									\
-    else								\
-      {									\
-	R##_e--;							\
-	_n_f3 = X##_f1;							\
-	_n_f2 = X##_f0;							\
-	_n_f1 = _n_f0 = 0;						\
-      }									\
-									\
-    /* Normalize, i.e. make the most significant bit of the 		\
-       denominator set.  CHANGED: - 1 to nothing -- PMM */		\
-    _FP_FRAC_SLL_2(Y, _FP_WFRACXBITS_##fs /* -1 */);			\
-									\
-    /* Do the 256/128 bit division given the 128-bit _fp_udivmodtf4 	\
-       primitive snagged from libgcc2.c.  */				\
-									\
-    _fp_udivmodti4(_qmem, _rmem, _n_f3, _n_f2, 0, Y##_f1);		\
-    _q_f1 = _qmem[0];							\
-    umul_ppmm(_m_f1, _m_f0, _q_f1, Y##_f0);				\
-    _r_f1 = _rmem[0];							\
-    _r_f0 = _n_f1;							\
-    if (_FP_FRAC_GT_2(_m, _r))						\
-      {									\
-	_q_f1--;							\
-	_FP_FRAC_ADD_2(_r, _r, Y);					\
-	if (_FP_FRAC_GE_2(_r, Y) && _FP_FRAC_GT_2(_m, _r))		\
-	  {								\
-	    _q_f1--;							\
-	    _FP_FRAC_ADD_2(_r, _r, Y);					\
-	  }								\
-      }									\
-    _FP_FRAC_SUB_2(_r, _r, _m);						\
-									\
-    _fp_udivmodti4(_qmem, _rmem, _r_f1, _r_f0, 0, Y##_f1);		\
-    _q_f0 = _qmem[0];							\
-    umul_ppmm(_m_f1, _m_f0, _q_f0, Y##_f0);				\
-    _r_f1 = _rmem[0];							\
-    _r_f0 = _n_f0;							\
-    if (_FP_FRAC_GT_2(_m, _r))						\
-      {									\
-	_q_f0--;							\
-	_FP_FRAC_ADD_2(_r, _r, Y);					\
-	if (_FP_FRAC_GE_2(_r, Y) && _FP_FRAC_GT_2(_m, _r))		\
-	  {								\
-	    _q_f0--;							\
-	    _FP_FRAC_ADD_2(_r, _r, Y);					\
-	  }								\
-      }									\
-    _FP_FRAC_SUB_2(_r, _r, _m);						\
-									\
-    R##_f1 = _q_f1;							\
-    R##_f0 = _q_f0 | ((_r_f1 | _r_f0) != 0);				\
-    /* adjust so answer is normalized again. I'm not sure what the 	\
-     * final sz param should be. In practice it's never used since      \
-     * N is 1 which is always going to be < _FP_W_TYPE_SIZE...		\
-     */									\
-    /* _FP_FRAC_SRS_2(R,1,_FP_WFRACBITS_##fs);	*/			\
-  } while (0)
-
-
-#define _FP_DIV_MEAT_2_gmp(fs, R, X, Y)					\
-  do {									\
-    _FP_W_TYPE _x[4], _y[2], _z[4];					\
-    _y[0] = Y##_f0; _y[1] = Y##_f1;					\
-    _x[0] = _x[3] = 0;							\
-    if (_FP_FRAC_GT_2(X, Y))						\
-      {									\
-	R##_e++;							\
-	_x[1] = (X##_f0 << (_FP_WFRACBITS-1 - _FP_W_TYPE_SIZE) |	\
-		 X##_f1 >> (_FP_W_TYPE_SIZE -				\
-			    (_FP_WFRACBITS-1 - _FP_W_TYPE_SIZE)));	\
-	_x[2] = X##_f1 << (_FP_WFRACBITS-1 - _FP_W_TYPE_SIZE);		\
-      }									\
-    else								\
-      {									\
-	_x[1] = (X##_f0 << (_FP_WFRACBITS - _FP_W_TYPE_SIZE) |		\
-		 X##_f1 >> (_FP_W_TYPE_SIZE -				\
-			    (_FP_WFRACBITS - _FP_W_TYPE_SIZE)));	\
-	_x[2] = X##_f1 << (_FP_WFRACBITS - _FP_W_TYPE_SIZE);		\
-      }									\
-									\
-    (void) mpn_divrem (_z, 0, _x, 4, _y, 2);				\
-    R##_f1 = _z[1];							\
-    R##_f0 = _z[0] | ((_x[0] | _x[1]) != 0);				\
-  } while (0)
-
-
-/*
- * Square root algorithms:
- * We have just one right now, maybe Newton approximation
- * should be added for those machines where division is fast.
- */
-
-#define _FP_SQRT_MEAT_2(R, S, T, X, q)			\
-  do {							\
-    while (q)						\
-      {							\
-        T##_f1 = S##_f1 + q;				\
-        if (T##_f1 <= X##_f1)				\
-          {						\
-            S##_f1 = T##_f1 + q;			\
-            X##_f1 -= T##_f1;				\
-            R##_f1 += q;				\
-          }						\
-        _FP_FRAC_SLL_2(X, 1);				\
-        q >>= 1;					\
-      }							\
-    q = (_FP_W_TYPE)1 << (_FP_W_TYPE_SIZE - 1);		\
-    while (q)						\
-      {							\
-        T##_f0 = S##_f0 + q;				\
-        T##_f1 = S##_f1;				\
-        if (T##_f1 < X##_f1 || 				\
-            (T##_f1 == X##_f1 && T##_f0 < X##_f0))	\
-          {						\
-            S##_f0 = T##_f0 + q;			\
-            if (((_FP_WS_TYPE)T##_f0) < 0 &&		\
-                ((_FP_WS_TYPE)S##_f0) >= 0)		\
-              S##_f1++;					\
-            _FP_FRAC_SUB_2(X, X, T);			\
-            R##_f0 += q;				\
-          }						\
-        _FP_FRAC_SLL_2(X, 1);				\
-        q >>= 1;					\
-      }							\
-  } while (0)
-
-
-/*
- * Assembly/disassembly for converting to/from integral types.
- * No shifting or overflow handled here.
- */
-
-#define _FP_FRAC_ASSEMBLE_2(r, X, rsize)	\
-  do {						\
-    if (rsize <= _FP_W_TYPE_SIZE)		\
-      r = X##_f0;				\
-    else					\
-      {						\
-	r = X##_f1;				\
-	r <<= _FP_W_TYPE_SIZE;			\
-	r += X##_f0;				\
-      }						\
-  } while (0)
-
-#define _FP_FRAC_DISASSEMBLE_2(X, r, rsize)				\
-  do {									\
-    X##_f0 = r;								\
-    X##_f1 = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE);	\
-  } while (0)
-
-/*
- * Convert FP values between word sizes
- */
-
-#define _FP_FRAC_CONV_1_2(dfs, sfs, D, S)				\
-  do {									\
-    _FP_FRAC_SRS_2(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs),	\
-		   _FP_WFRACBITS_##sfs);				\
-    D##_f = S##_f0;							\
-  } while (0)
-
-#define _FP_FRAC_CONV_2_1(dfs, sfs, D, S)				\
-  do {									\
-    D##_f0 = S##_f;							\
-    D##_f1 = 0;								\
-    _FP_FRAC_SLL_2(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs));	\
-  } while (0)
-
diff --git a/arch/ppc/math-emu/op-4.h b/arch/ppc/math-emu/op-4.h
deleted file mode 100644
index fcdd6d0..0000000
--- a/arch/ppc/math-emu/op-4.h
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * Basic four-word fraction declaration and manipulation.
- *
- * When adding quadword support for 32 bit machines, we need
- * to be a little careful as double multiply uses some of these
- * macros: (in op-2.h)
- * _FP_MUL_MEAT_2_wide() uses _FP_FRAC_DECL_4, _FP_FRAC_WORD_4,
- * _FP_FRAC_ADD_4, _FP_FRAC_SRS_4
- * _FP_MUL_MEAT_2_gmp() uses _FP_FRAC_SRS_4 (and should use
- * _FP_FRAC_DECL_4: it appears to be broken and is not used
- * anywhere anyway. )
- *
- * I've now fixed all the macros that were here from the sparc64 code.
- * [*none* of the shift macros were correct!] -- PMM 02/1998
- *
- * The only quadword stuff that remains to be coded is:
- * 1) the conversion to/from ints, which requires
- * that we check (in op-common.h) that the following do the right thing
- * for quadwords: _FP_TO_INT(Q,4,r,X,rsz,rsg), _FP_FROM_INT(Q,4,X,r,rs,rt)
- * 2) multiply, divide and sqrt, which require:
- * _FP_MUL_MEAT_4_*(R,X,Y), _FP_DIV_MEAT_4_*(R,X,Y), _FP_SQRT_MEAT_4(R,S,T,X,q),
- * This also needs _FP_MUL_MEAT_Q and _FP_DIV_MEAT_Q to be defined to
- * some suitable _FP_MUL_MEAT_4_* macros in sfp-machine.h.
- * [we're free to choose whatever FP_MUL_MEAT_4_* macros we need for
- * these; they are used nowhere else. ]
- */
-
-#define _FP_FRAC_DECL_4(X)	_FP_W_TYPE X##_f[4]
-#define _FP_FRAC_COPY_4(D,S)			\
-  (D##_f[0] = S##_f[0], D##_f[1] = S##_f[1],	\
-   D##_f[2] = S##_f[2], D##_f[3] = S##_f[3])
-/* The _FP_FRAC_SET_n(X,I) macro is intended for use with another
- * macro such as _FP_ZEROFRAC_n which returns n comma separated values.
- * The result is that we get an expansion of __FP_FRAC_SET_n(X,I0,I1,I2,I3)
- * which just assigns the In values to the array X##_f[].
- * This is why the number of parameters doesn't appear to match
- * at first glance...      -- PMM
- */
-#define _FP_FRAC_SET_4(X,I)	__FP_FRAC_SET_4(X, I)
-#define _FP_FRAC_HIGH_4(X)	(X##_f[3])
-#define _FP_FRAC_LOW_4(X)	(X##_f[0])
-#define _FP_FRAC_WORD_4(X,w)	(X##_f[w])
-
-#define _FP_FRAC_SLL_4(X,N)						\
-  do {									\
-    _FP_I_TYPE _up, _down, _skip, _i;					\
-    _skip = (N) / _FP_W_TYPE_SIZE;					\
-    _up = (N) % _FP_W_TYPE_SIZE;					\
-    _down = _FP_W_TYPE_SIZE - _up;					\
-    for (_i = 3; _i > _skip; --_i)					\
-      X##_f[_i] = X##_f[_i-_skip] << _up | X##_f[_i-_skip-1] >> _down;	\
-/* bugfixed: was X##_f[_i] <<= _up;  -- PMM 02/1998 */                  \
-    X##_f[_i] = X##_f[0] << _up; 	                                \
-    for (--_i; _i >= 0; --_i)						\
-      X##_f[_i] = 0;							\
-  } while (0)
-
-/* This one was broken too */
-#define _FP_FRAC_SRL_4(X,N)						\
-  do {									\
-    _FP_I_TYPE _up, _down, _skip, _i;					\
-    _skip = (N) / _FP_W_TYPE_SIZE;					\
-    _down = (N) % _FP_W_TYPE_SIZE;					\
-    _up = _FP_W_TYPE_SIZE - _down;					\
-    for (_i = 0; _i < 3-_skip; ++_i)					\
-      X##_f[_i] = X##_f[_i+_skip] >> _down | X##_f[_i+_skip+1] << _up;	\
-    X##_f[_i] = X##_f[3] >> _down;			         	\
-    for (++_i; _i < 4; ++_i)						\
-      X##_f[_i] = 0;							\
-  } while (0)
-
-
-/* Right shift with sticky-lsb.
- * What this actually means is that we do a standard right-shift,
- * but that if any of the bits that fall off the right hand side
- * were one then we always set the LSbit.
- */
-#define _FP_FRAC_SRS_4(X,N,size)					\
-  do {									\
-    _FP_I_TYPE _up, _down, _skip, _i;					\
-    _FP_W_TYPE _s;							\
-    _skip = (N) / _FP_W_TYPE_SIZE;					\
-    _down = (N) % _FP_W_TYPE_SIZE;					\
-    _up = _FP_W_TYPE_SIZE - _down;					\
-    for (_s = _i = 0; _i < _skip; ++_i)					\
-      _s |= X##_f[_i];							\
-    _s |= X##_f[_i] << _up;						\
-/* s is now != 0 if we want to set the LSbit */                         \
-    for (_i = 0; _i < 3-_skip; ++_i)					\
-      X##_f[_i] = X##_f[_i+_skip] >> _down | X##_f[_i+_skip+1] << _up;	\
-    X##_f[_i] = X##_f[3] >> _down;					\
-    for (++_i; _i < 4; ++_i)						\
-      X##_f[_i] = 0;							\
-    /* don't fix the LSB until the very end when we're sure f[0] is stable */ \
-    X##_f[0] |= (_s != 0);                                              \
-  } while (0)
-
-#define _FP_FRAC_ADD_4(R,X,Y)						\
-  __FP_FRAC_ADD_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0],		\
-		  X##_f[3], X##_f[2], X##_f[1], X##_f[0],		\
-		  Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0])
-
-#define _FP_FRAC_SUB_4(R,X,Y)                                           \
-  __FP_FRAC_SUB_4(R##_f[3], R##_f[2], R##_f[1], R##_f[0],		\
-		  X##_f[3], X##_f[2], X##_f[1], X##_f[0],		\
-		  Y##_f[3], Y##_f[2], Y##_f[1], Y##_f[0])
-
-#define _FP_FRAC_ADDI_4(X,I)                                            \
-  __FP_FRAC_ADDI_4(X##_f[3], X##_f[2], X##_f[1], X##_f[0], I)
-
-#define _FP_ZEROFRAC_4  0,0,0,0
-#define _FP_MINFRAC_4   0,0,0,1
-
-#define _FP_FRAC_ZEROP_4(X)     ((X##_f[0] | X##_f[1] | X##_f[2] | X##_f[3]) == 0)
-#define _FP_FRAC_NEGP_4(X)      ((_FP_WS_TYPE)X##_f[3] < 0)
-#define _FP_FRAC_OVERP_4(fs,X)  (X##_f[0] & _FP_OVERFLOW_##fs)
-
-#define _FP_FRAC_EQ_4(X,Y)                              \
- (X##_f[0] == Y##_f[0] && X##_f[1] == Y##_f[1]          \
-  && X##_f[2] == Y##_f[2] && X##_f[3] == Y##_f[3])
-
-#define _FP_FRAC_GT_4(X,Y)                              \
- (X##_f[3] > Y##_f[3] ||                                \
-  (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] ||      \
-   (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] ||     \
-    (X##_f[1] == Y##_f[1] && X##_f[0] > Y##_f[0])       \
-   ))                                                   \
-  ))                                                    \
- )
-
-#define _FP_FRAC_GE_4(X,Y)                              \
- (X##_f[3] > Y##_f[3] ||                                \
-  (X##_f[3] == Y##_f[3] && (X##_f[2] > Y##_f[2] ||      \
-   (X##_f[2] == Y##_f[2] && (X##_f[1] > Y##_f[1] ||     \
-    (X##_f[1] == Y##_f[1] && X##_f[0] >= Y##_f[0])      \
-   ))                                                   \
-  ))                                                    \
- )
-
-
-#define _FP_FRAC_CLZ_4(R,X)             \
-  do {                                  \
-    if (X##_f[3])                       \
-    {                                   \
-        __FP_CLZ(R,X##_f[3]);           \
-    }                                   \
-    else if (X##_f[2])                  \
-    {                                   \
-        __FP_CLZ(R,X##_f[2]);           \
-        R += _FP_W_TYPE_SIZE;           \
-    }                                   \
-    else if (X##_f[1])                  \
-    {                                   \
-        __FP_CLZ(R,X##_f[2]);           \
-        R += _FP_W_TYPE_SIZE*2;         \
-    }                                   \
-    else                                \
-    {                                   \
-        __FP_CLZ(R,X##_f[0]);           \
-        R += _FP_W_TYPE_SIZE*3;         \
-    }                                   \
-  } while(0)
-
-
-#define _FP_UNPACK_RAW_4(fs, X, val)                            \
-  do {                                                          \
-    union _FP_UNION_##fs _flo; _flo.flt = (val);        	\
-    X##_f[0] = _flo.bits.frac0;                                 \
-    X##_f[1] = _flo.bits.frac1;                                 \
-    X##_f[2] = _flo.bits.frac2;                                 \
-    X##_f[3] = _flo.bits.frac3;                                 \
-    X##_e  = _flo.bits.exp;                                     \
-    X##_s  = _flo.bits.sign;                                    \
-  } while (0)
-
-#define _FP_PACK_RAW_4(fs, val, X)                              \
-  do {                                                          \
-    union _FP_UNION_##fs _flo;					\
-    _flo.bits.frac0 = X##_f[0];                                 \
-    _flo.bits.frac1 = X##_f[1];                                 \
-    _flo.bits.frac2 = X##_f[2];                                 \
-    _flo.bits.frac3 = X##_f[3];                                 \
-    _flo.bits.exp   = X##_e;                                    \
-    _flo.bits.sign  = X##_s;                                    \
-    (val) = _flo.flt;                                   	\
-  } while (0)
-
-
-/*
- * Internals
- */
-
-#define __FP_FRAC_SET_4(X,I3,I2,I1,I0)					\
-  (X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0)
-
-#ifndef __FP_FRAC_ADD_4
-#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)		\
-  (r0 = x0 + y0,							\
-   r1 = x1 + y1 + (r0 < x0),						\
-   r2 = x2 + y2 + (r1 < x1),						\
-   r3 = x3 + y3 + (r2 < x2))
-#endif
-
-#ifndef __FP_FRAC_SUB_4
-#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)		\
-  (r0 = x0 - y0,                                                        \
-   r1 = x1 - y1 - (r0 > x0),                                            \
-   r2 = x2 - y2 - (r1 > x1),                                            \
-   r3 = x3 - y3 - (r2 > x2))
-#endif
-
-#ifndef __FP_FRAC_ADDI_4
-/* I always wanted to be a lisp programmer :-> */
-#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i)                                 \
-  (x3 += ((x2 += ((x1 += ((x0 += i) < x0)) < x1) < x2)))
-#endif
-
-/* Convert FP values between word sizes. This appears to be more
- * complicated than I'd have expected it to be, so these might be
- * wrong... These macros are in any case somewhat bogus because they
- * use information about what various FRAC_n variables look like
- * internally [eg, that 2 word vars are X_f0 and x_f1]. But so do
- * the ones in op-2.h and op-1.h.
- */
-#define _FP_FRAC_CONV_1_4(dfs, sfs, D, S)                               \
-   do {                                                                 \
-     _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs),     \
-                        _FP_WFRACBITS_##sfs);                           \
-     D##_f = S##_f[0];                                                   \
-  } while (0)
-
-#define _FP_FRAC_CONV_2_4(dfs, sfs, D, S)                               \
-   do {                                                                 \
-     _FP_FRAC_SRS_4(S, (_FP_WFRACBITS_##sfs - _FP_WFRACBITS_##dfs),     \
-                        _FP_WFRACBITS_##sfs);                           \
-     D##_f0 = S##_f[0];                                                  \
-     D##_f1 = S##_f[1];                                                  \
-  } while (0)
-
-/* Assembly/disassembly for converting to/from integral types.
- * No shifting or overflow handled here.
- */
-/* Put the FP value X into r, which is an integer of size rsize. */
-#define _FP_FRAC_ASSEMBLE_4(r, X, rsize)                                \
-  do {                                                                  \
-    if (rsize <= _FP_W_TYPE_SIZE)                                       \
-      r = X##_f[0];                                                     \
-    else if (rsize <= 2*_FP_W_TYPE_SIZE)                                \
-    {                                                                   \
-      r = X##_f[1];                                                     \
-      r <<= _FP_W_TYPE_SIZE;                                            \
-      r += X##_f[0];                                                    \
-    }                                                                   \
-    else                                                                \
-    {                                                                   \
-      /* I'm feeling lazy so we deal with int == 3words (implausible)*/ \
-      /* and int == 4words as a single case.                         */ \
-      r = X##_f[3];                                                     \
-      r <<= _FP_W_TYPE_SIZE;                                            \
-      r += X##_f[2];                                                    \
-      r <<= _FP_W_TYPE_SIZE;                                            \
-      r += X##_f[1];                                                    \
-      r <<= _FP_W_TYPE_SIZE;                                            \
-      r += X##_f[0];                                                    \
-    }                                                                   \
-  } while (0)
-
-/* "No disassemble Number Five!" */
-/* move an integer of size rsize into X's fractional part. We rely on
- * the _f[] array consisting of words of size _FP_W_TYPE_SIZE to avoid
- * having to mask the values we store into it.
- */
-#define _FP_FRAC_DISASSEMBLE_4(X, r, rsize)                             \
-  do {                                                                  \
-    X##_f[0] = r;                                                       \
-    X##_f[1] = (rsize <= _FP_W_TYPE_SIZE ? 0 : r >> _FP_W_TYPE_SIZE);   \
-    X##_f[2] = (rsize <= 2*_FP_W_TYPE_SIZE ? 0 : r >> 2*_FP_W_TYPE_SIZE); \
-    X##_f[3] = (rsize <= 3*_FP_W_TYPE_SIZE ? 0 : r >> 3*_FP_W_TYPE_SIZE); \
-  } while (0)
-
-#define _FP_FRAC_CONV_4_1(dfs, sfs, D, S)                               \
-   do {                                                                 \
-     D##_f[0] = S##_f;                                                  \
-     D##_f[1] = D##_f[2] = D##_f[3] = 0;                                \
-     _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs));    \
-   } while (0)
-
-#define _FP_FRAC_CONV_4_2(dfs, sfs, D, S)                               \
-   do {                                                                 \
-     D##_f[0] = S##_f0;                                                 \
-     D##_f[1] = S##_f1;                                                 \
-     D##_f[2] = D##_f[3] = 0;                                           \
-     _FP_FRAC_SLL_4(D, (_FP_WFRACBITS_##dfs - _FP_WFRACBITS_##sfs));    \
-   } while (0)
-
-/* FIXME! This has to be written */
-#define _FP_SQRT_MEAT_4(R, S, T, X, q)
diff --git a/arch/ppc/math-emu/op-common.h b/arch/ppc/math-emu/op-common.h
deleted file mode 100644
index afb82b6..0000000
--- a/arch/ppc/math-emu/op-common.h
+++ /dev/null
@@ -1,688 +0,0 @@
-#define _FP_DECL(wc, X)			\
-  _FP_I_TYPE X##_c, X##_s, X##_e;	\
-  _FP_FRAC_DECL_##wc(X)
-
-/*
- * Finish truely unpacking a native fp value by classifying the kind
- * of fp value and normalizing both the exponent and the fraction.
- */
-
-#define _FP_UNPACK_CANONICAL(fs, wc, X)					\
-do {									\
-  switch (X##_e)							\
-  {									\
-  default:								\
-    _FP_FRAC_HIGH_##wc(X) |= _FP_IMPLBIT_##fs;				\
-    _FP_FRAC_SLL_##wc(X, _FP_WORKBITS);					\
-    X##_e -= _FP_EXPBIAS_##fs;						\
-    X##_c = FP_CLS_NORMAL;						\
-    break;								\
-									\
-  case 0:								\
-    if (_FP_FRAC_ZEROP_##wc(X))						\
-      X##_c = FP_CLS_ZERO;						\
-    else								\
-      {									\
-	/* a denormalized number */					\
-	_FP_I_TYPE _shift;						\
-	_FP_FRAC_CLZ_##wc(_shift, X);					\
-	_shift -= _FP_FRACXBITS_##fs;					\
-	_FP_FRAC_SLL_##wc(X, (_shift+_FP_WORKBITS));			\
-	X##_e -= _FP_EXPBIAS_##fs - 1 + _shift;				\
-	X##_c = FP_CLS_NORMAL;						\
-      }									\
-    break;								\
-									\
-  case _FP_EXPMAX_##fs:							\
-    if (_FP_FRAC_ZEROP_##wc(X))						\
-      X##_c = FP_CLS_INF;						\
-    else								\
-      /* we don't differentiate between signaling and quiet nans */	\
-      X##_c = FP_CLS_NAN;						\
-    break;								\
-  }									\
-} while (0)
-
-
-/*
- * Before packing the bits back into the native fp result, take care
- * of such mundane things as rounding and overflow.  Also, for some
- * kinds of fp values, the original parts may not have been fully
- * extracted -- but that is ok, we can regenerate them now.
- */
-
-#define _FP_PACK_CANONICAL(fs, wc, X)				\
-({int __ret = 0;						\
-  switch (X##_c)						\
-  {								\
-  case FP_CLS_NORMAL:						\
-    X##_e += _FP_EXPBIAS_##fs;					\
-    if (X##_e > 0)						\
-      {								\
-	__ret |= _FP_ROUND(wc, X);				\
-	if (_FP_FRAC_OVERP_##wc(fs, X))				\
-	  {							\
-	    _FP_FRAC_SRL_##wc(X, (_FP_WORKBITS+1));		\
-	    X##_e++;						\
-	  }							\
-	else							\
-	  _FP_FRAC_SRL_##wc(X, _FP_WORKBITS);			\
-	if (X##_e >= _FP_EXPMAX_##fs)				\
-	  {							\
-	    /* overflow to infinity */				\
-	    X##_e = _FP_EXPMAX_##fs;				\
-	    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);		\
-            __ret |= EFLAG_OVERFLOW;				\
-	  }							\
-      }								\
-    else							\
-      {								\
-	/* we've got a denormalized number */			\
-	X##_e = -X##_e + 1;					\
-	if (X##_e <= _FP_WFRACBITS_##fs)			\
-	  {							\
-	    _FP_FRAC_SRS_##wc(X, X##_e, _FP_WFRACBITS_##fs);	\
-	    _FP_FRAC_SLL_##wc(X, 1);				\
-	    if (_FP_FRAC_OVERP_##wc(fs, X))			\
-	      {							\
-	        X##_e = 1;					\
-	        _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);	\
-	      }							\
-	    else						\
-	      {							\
-		X##_e = 0;					\
-		_FP_FRAC_SRL_##wc(X, _FP_WORKBITS+1);		\
-                __ret |= EFLAG_UNDERFLOW;			\
-	      }							\
-	  }							\
-	else							\
-	  {							\
-	    /* underflow to zero */				\
-	    X##_e = 0;						\
-	    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);		\
-            __ret |= EFLAG_UNDERFLOW;				\
-	  }							\
-      }								\
-    break;							\
-								\
-  case FP_CLS_ZERO:						\
-    X##_e = 0;							\
-    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			\
-    break;							\
-								\
-  case FP_CLS_INF:						\
-    X##_e = _FP_EXPMAX_##fs;					\
-    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			\
-    break;							\
-								\
-  case FP_CLS_NAN:						\
-    X##_e = _FP_EXPMAX_##fs;					\
-    if (!_FP_KEEPNANFRACP)					\
-      {								\
-	_FP_FRAC_SET_##wc(X, _FP_NANFRAC_##fs);			\
-	X##_s = 0;						\
-      }								\
-    else							\
-      _FP_FRAC_HIGH_##wc(X) |= _FP_QNANBIT_##fs;		\
-    break;							\
-  }								\
-  __ret;							\
-})
-
-
-/*
- * Main addition routine.  The input values should be cooked.
- */
-
-#define _FP_ADD(fs, wc, R, X, Y)					     \
-do {									     \
-  switch (_FP_CLS_COMBINE(X##_c, Y##_c))				     \
-  {									     \
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):			     \
-    {									     \
-      /* shift the smaller number so that its exponent matches the larger */ \
-      _FP_I_TYPE diff = X##_e - Y##_e;					     \
-									     \
-      if (diff < 0)							     \
-	{								     \
-	  diff = -diff;							     \
-	  if (diff <= _FP_WFRACBITS_##fs)				     \
-	    _FP_FRAC_SRS_##wc(X, diff, _FP_WFRACBITS_##fs);		     \
-	  else if (!_FP_FRAC_ZEROP_##wc(X))				     \
-	    _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc);			     \
-	  else								     \
-	    _FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			     \
-	  R##_e = Y##_e;						     \
-	}								     \
-      else								     \
-	{								     \
-	  if (diff > 0)							     \
-	    {								     \
-	      if (diff <= _FP_WFRACBITS_##fs)				     \
-	        _FP_FRAC_SRS_##wc(Y, diff, _FP_WFRACBITS_##fs);		     \
-	      else if (!_FP_FRAC_ZEROP_##wc(Y))				     \
-	        _FP_FRAC_SET_##wc(Y, _FP_MINFRAC_##wc);			     \
-	      else							     \
-	        _FP_FRAC_SET_##wc(Y, _FP_ZEROFRAC_##wc);		     \
-	    }								     \
-	  R##_e = X##_e;						     \
-	}								     \
-									     \
-      R##_c = FP_CLS_NORMAL;						     \
-									     \
-      if (X##_s == Y##_s)						     \
-	{								     \
-	  R##_s = X##_s;						     \
-	  _FP_FRAC_ADD_##wc(R, X, Y);					     \
-	  if (_FP_FRAC_OVERP_##wc(fs, R))				     \
-	    {								     \
-	      _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs);		     \
-	      R##_e++;							     \
-	    }								     \
-	}								     \
-      else								     \
-	{								     \
-	  R##_s = X##_s;						     \
-	  _FP_FRAC_SUB_##wc(R, X, Y);					     \
-	  if (_FP_FRAC_ZEROP_##wc(R))					     \
-	    {								     \
-	      /* return an exact zero */				     \
-	      if (FP_ROUNDMODE == FP_RND_MINF)				     \
-		R##_s |= Y##_s;						     \
-	      else							     \
-		R##_s &= Y##_s;						     \
-	      R##_c = FP_CLS_ZERO;					     \
-	    }								     \
-	  else								     \
-	    {								     \
-	      if (_FP_FRAC_NEGP_##wc(R))				     \
-		{							     \
-		  _FP_FRAC_SUB_##wc(R, Y, X);				     \
-		  R##_s = Y##_s;					     \
-		}							     \
-									     \
-	      /* renormalize after subtraction */			     \
-	      _FP_FRAC_CLZ_##wc(diff, R);				     \
-	      diff -= _FP_WFRACXBITS_##fs;				     \
-	      if (diff)							     \
-		{							     \
-		  R##_e -= diff;					     \
-		  _FP_FRAC_SLL_##wc(R, diff);				     \
-		}							     \
-	    }								     \
-	}								     \
-      break;								     \
-    }									     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):				     \
-    _FP_CHOOSENAN(fs, wc, R, X, Y);					     \
-    break;								     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):			     \
-    R##_e = X##_e;							     \
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):			     \
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):				     \
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):				     \
-    _FP_FRAC_COPY_##wc(R, X);						     \
-    R##_s = X##_s;							     \
-    R##_c = X##_c;							     \
-    break;								     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):			     \
-    R##_e = Y##_e;							     \
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):			     \
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):				     \
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):				     \
-    _FP_FRAC_COPY_##wc(R, Y);						     \
-    R##_s = Y##_s;							     \
-    R##_c = Y##_c;							     \
-    break;								     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):				     \
-    if (X##_s != Y##_s)							     \
-      {									     \
-	/* +INF + -INF => NAN */					     \
-	_FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);				     \
-	R##_s = X##_s ^ Y##_s;						     \
-	R##_c = FP_CLS_NAN;						     \
-	break;								     \
-      }									     \
-    /* FALLTHRU */							     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):			     \
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):				     \
-    R##_s = X##_s;							     \
-    R##_c = FP_CLS_INF;							     \
-    break;								     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):			     \
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):				     \
-    R##_s = Y##_s;							     \
-    R##_c = FP_CLS_INF;							     \
-    break;								     \
-									     \
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):			     \
-    /* make sure the sign is correct */					     \
-    if (FP_ROUNDMODE == FP_RND_MINF)					     \
-      R##_s = X##_s | Y##_s;						     \
-    else								     \
-      R##_s = X##_s & Y##_s;						     \
-    R##_c = FP_CLS_ZERO;						     \
-    break;								     \
-									     \
-  default:								     \
-    abort();								     \
-  }									     \
-} while (0)
-
-
-/*
- * Main negation routine.  FIXME -- when we care about setting exception
- * bits reliably, this will not do.  We should examine all of the fp classes.
- */
-
-#define _FP_NEG(fs, wc, R, X)		\
-  do {					\
-    _FP_FRAC_COPY_##wc(R, X);		\
-    R##_c = X##_c;			\
-    R##_e = X##_e;			\
-    R##_s = 1 ^ X##_s;			\
-  } while (0)
-
-
-/*
- * Main multiplication routine.  The input values should be cooked.
- */
-
-#define _FP_MUL(fs, wc, R, X, Y)			\
-do {							\
-  R##_s = X##_s ^ Y##_s;				\
-  switch (_FP_CLS_COMBINE(X##_c, Y##_c))		\
-  {							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):	\
-    R##_c = FP_CLS_NORMAL;				\
-    R##_e = X##_e + Y##_e + 1;				\
-							\
-    _FP_MUL_MEAT_##fs(R,X,Y);				\
-							\
-    if (_FP_FRAC_OVERP_##wc(fs, R))			\
-      _FP_FRAC_SRS_##wc(R, 1, _FP_WFRACBITS_##fs);	\
-    else						\
-      R##_e--;						\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):		\
-    _FP_CHOOSENAN(fs, wc, R, X, Y);			\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):	\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):		\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):		\
-    R##_s = X##_s;					\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):		\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):	\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):	\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):	\
-    _FP_FRAC_COPY_##wc(R, X);				\
-    R##_c = X##_c;					\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):	\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):		\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):		\
-    R##_s = Y##_s;					\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):	\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):	\
-    _FP_FRAC_COPY_##wc(R, Y);				\
-    R##_c = Y##_c;					\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):		\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):		\
-    R##_c = FP_CLS_NAN;					\
-    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);		\
-    break;						\
-							\
-  default:						\
-    abort();						\
-  }							\
-} while (0)
-
-
-/*
- * Main division routine.  The input values should be cooked.
- */
-
-#define _FP_DIV(fs, wc, R, X, Y)			\
-do {							\
-  R##_s = X##_s ^ Y##_s;				\
-  switch (_FP_CLS_COMBINE(X##_c, Y##_c))		\
-  {							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NORMAL):	\
-    R##_c = FP_CLS_NORMAL;				\
-    R##_e = X##_e - Y##_e;				\
-							\
-    _FP_DIV_MEAT_##fs(R,X,Y);				\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NAN):		\
-    _FP_CHOOSENAN(fs, wc, R, X, Y);			\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_NORMAL):	\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_INF):		\
-  case _FP_CLS_COMBINE(FP_CLS_NAN,FP_CLS_ZERO):		\
-    R##_s = X##_s;					\
-    _FP_FRAC_COPY_##wc(R, X);				\
-    R##_c = X##_c;					\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_NAN):	\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NAN):		\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NAN):		\
-    R##_s = Y##_s;					\
-    _FP_FRAC_COPY_##wc(R, Y);				\
-    R##_c = Y##_c;					\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_INF):	\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_INF):		\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_NORMAL):	\
-    R##_c = FP_CLS_ZERO;				\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_NORMAL,FP_CLS_ZERO):	\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_ZERO):		\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_NORMAL):	\
-    R##_c = FP_CLS_INF;					\
-    break;						\
-							\
-  case _FP_CLS_COMBINE(FP_CLS_INF,FP_CLS_INF):		\
-  case _FP_CLS_COMBINE(FP_CLS_ZERO,FP_CLS_ZERO):	\
-    R##_c = FP_CLS_NAN;					\
-    _FP_FRAC_SET_##wc(R, _FP_NANFRAC_##fs);		\
-    break;						\
-							\
-  default:						\
-    abort();						\
-  }							\
-} while (0)
-
-
-/*
- * Main differential comparison routine.  The inputs should be raw not
- * cooked.  The return is -1,0,1 for normal values, 2 otherwise.
- */
-
-#define _FP_CMP(fs, wc, ret, X, Y, un)					\
-  do {									\
-    /* NANs are unordered */						\
-    if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(X))		\
-	|| (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(Y)))	\
-      {									\
-	ret = un;							\
-      }									\
-    else								\
-      {									\
-        int __x_zero = (!X##_e && _FP_FRAC_ZEROP_##wc(X)) ? 1 : 0;	\
-        int __y_zero = (!Y##_e && _FP_FRAC_ZEROP_##wc(Y)) ? 1 : 0;	\
-									\
-	if (__x_zero && __y_zero)					\
-	  ret = 0;							\
-	else if (__x_zero)						\
-	  ret = Y##_s ? 1 : -1;						\
-	else if (__y_zero)						\
-	  ret = X##_s ? -1 : 1;						\
-	else if (X##_s != Y##_s)					\
-	  ret = X##_s ? -1 : 1;						\
-	else if (X##_e > Y##_e)						\
-	  ret = X##_s ? -1 : 1;						\
-	else if (X##_e < Y##_e)						\
-	  ret = X##_s ? 1 : -1;						\
-	else if (_FP_FRAC_GT_##wc(X, Y))				\
-	  ret = X##_s ? -1 : 1;						\
-	else if (_FP_FRAC_GT_##wc(Y, X))				\
-	  ret = X##_s ? 1 : -1;						\
-	else								\
-	  ret = 0;							\
-      }									\
-  } while (0)
-
-
-/* Simplification for strict equality.  */
-
-#define _FP_CMP_EQ(fs, wc, ret, X, Y)					  \
-  do {									  \
-    /* NANs are unordered */						  \
-    if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(X))		  \
-	|| (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc(Y)))	  \
-      {									  \
-	ret = 1;							  \
-      }									  \
-    else								  \
-      {									  \
-	ret = !(X##_e == Y##_e						  \
-		&& _FP_FRAC_EQ_##wc(X, Y)				  \
-		&& (X##_s == Y##_s || !X##_e && _FP_FRAC_ZEROP_##wc(X))); \
-      }									  \
-  } while (0)
-
-/*
- * Main square root routine.  The input value should be cooked.
- */
-
-#define _FP_SQRT(fs, wc, R, X)						\
-do {									\
-    _FP_FRAC_DECL_##wc(T); _FP_FRAC_DECL_##wc(S);			\
-    _FP_W_TYPE q;							\
-    switch (X##_c)							\
-    {									\
-    case FP_CLS_NAN:							\
-    	R##_s = 0;							\
-    	R##_c = FP_CLS_NAN;						\
-    	_FP_FRAC_SET_##wc(X, _FP_ZEROFRAC_##wc);			\
-    	break;								\
-    case FP_CLS_INF:							\
-    	if (X##_s)							\
-    	  {								\
-    	    R##_s = 0;							\
-	    R##_c = FP_CLS_NAN; /* sNAN */				\
-    	  }								\
-    	else								\
-    	  {								\
-    	    R##_s = 0;							\
-    	    R##_c = FP_CLS_INF; /* sqrt(+inf) = +inf */			\
-    	  }								\
-    	break;								\
-    case FP_CLS_ZERO:							\
-	R##_s = X##_s;							\
-    	R##_c = FP_CLS_ZERO; /* sqrt(+-0) = +-0 */			\
-	break;								\
-    case FP_CLS_NORMAL:							\
-    	R##_s = 0;							\
-        if (X##_s)							\
-          {								\
-	    R##_c = FP_CLS_NAN; /* sNAN */				\
-	    break;							\
-          }								\
-    	R##_c = FP_CLS_NORMAL;						\
-        if (X##_e & 1)							\
-          _FP_FRAC_SLL_##wc(X, 1);					\
-        R##_e = X##_e >> 1;						\
-        _FP_FRAC_SET_##wc(S, _FP_ZEROFRAC_##wc);			\
-        _FP_FRAC_SET_##wc(R, _FP_ZEROFRAC_##wc);			\
-        q = _FP_OVERFLOW_##fs;						\
-        _FP_FRAC_SLL_##wc(X, 1);					\
-        _FP_SQRT_MEAT_##wc(R, S, T, X, q);				\
-        _FP_FRAC_SRL_##wc(R, 1);					\
-    }									\
-  } while (0)
-
-/*
- * Convert from FP to integer
- */
-
-/* "When a NaN, infinity, large positive argument >= 2147483648.0, or
- * large negative argument <= -2147483649.0 is converted to an integer,
- * the invalid_current bit...should be set and fp_exception_IEEE_754 should
- * be raised. If the floating point invalid trap is disabled, no trap occurs
- * and a numerical result is generated: if the sign bit of the operand
- * is 0, the result is 2147483647; if the sign bit of the operand is 1,
- * the result is -2147483648."
- * Similarly for conversion to extended ints, except that the boundaries
- * are >= 2^63, <= -(2^63 + 1), and the results are 2^63 + 1 for s=0 and
- * -2^63 for s=1.
- * -- SPARC Architecture Manual V9, Appendix B, which specifies how
- * SPARCs resolve implementation dependencies in the IEEE-754 spec.
- * I don't believe that the code below follows this. I'm not even sure
- * it's right!
- * It doesn't cope with needing to convert to an n bit integer when there
- * is no n bit integer type. Fortunately gcc provides long long so this
- * isn't a problem for sparc32.
- * I have, however, fixed its NaN handling to conform as above.
- *         -- PMM 02/1998
- * NB: rsigned is not 'is r declared signed?' but 'should the value stored
- * in r be signed or unsigned?'. r is always(?) declared unsigned.
- * Comments below are mine, BTW -- PMM
- */
-#define _FP_TO_INT(fs, wc, r, X, rsize, rsigned)			\
-  do {									\
-    switch (X##_c)							\
-      {									\
-      case FP_CLS_NORMAL:						\
-	if (X##_e < 0)							\
-	  {								\
-	  /* case FP_CLS_NAN: see above! */				\
-	  case FP_CLS_ZERO:						\
-	    r = 0;							\
-	  }								\
-	else if (X##_e >= rsize - (rsigned != 0))			\
-	  {	/* overflow */						\
-	  case FP_CLS_NAN:                                              \
-          case FP_CLS_INF:						\
-	    if (rsigned)						\
-	      {								\
-		r = 1;							\
-		r <<= rsize - 1;					\
-		r -= 1 - X##_s;						\
-	      }								\
-	    else							\
-	      {								\
-		r = 0;							\
-		if (!X##_s)						\
-		  r = ~r;						\
-	      }								\
-	  }								\
-	else								\
-	  {								\
-	    if (_FP_W_TYPE_SIZE*wc < rsize)				\
-	      {								\
-		_FP_FRAC_ASSEMBLE_##wc(r, X, rsize);			\
-		r <<= X##_e - _FP_WFRACBITS_##fs;			\
-	      }								\
-	    else							\
-	      {								\
-		if (X##_e >= _FP_WFRACBITS_##fs)			\
-		  _FP_FRAC_SLL_##wc(X, (X##_e - _FP_WFRACBITS_##fs + 1));\
-		else							\
-		  _FP_FRAC_SRL_##wc(X, (_FP_WFRACBITS_##fs - X##_e - 1));\
-		_FP_FRAC_ASSEMBLE_##wc(r, X, rsize);			\
-	      }								\
-	    if (rsigned && X##_s)					\
-	      r = -r;							\
-	  }								\
-	break;								\
-      }									\
-  } while (0)
-
-#define _FP_FROM_INT(fs, wc, X, r, rsize, rtype)			\
-  do {									\
-    if (r)								\
-      {									\
-	X##_c = FP_CLS_NORMAL;						\
-									\
-	if ((X##_s = (r < 0)))						\
-	  r = -r;							\
-	/* Note that `r' is now considered unsigned, so we don't have	\
-	   to worry about the single signed overflow case.  */		\
-									\
-	if (rsize <= _FP_W_TYPE_SIZE)					\
-	  __FP_CLZ(X##_e, r);						\
-	else								\
-	  __FP_CLZ_2(X##_e, (_FP_W_TYPE)(r >> _FP_W_TYPE_SIZE), 	\
-		     (_FP_W_TYPE)r);					\
-	if (rsize < _FP_W_TYPE_SIZE)					\
-		X##_e -= (_FP_W_TYPE_SIZE - rsize);			\
-	X##_e = rsize - X##_e - 1;					\
-									\
-	if (_FP_FRACBITS_##fs < rsize && _FP_WFRACBITS_##fs < X##_e)	\
-	  __FP_FRAC_SRS_1(r, (X##_e - _FP_WFRACBITS_##fs), rsize);	\
-	r &= ~((_FP_W_TYPE)1 << X##_e);					\
-	_FP_FRAC_DISASSEMBLE_##wc(X, ((unsigned rtype)r), rsize);	\
-	_FP_FRAC_SLL_##wc(X, (_FP_WFRACBITS_##fs - X##_e - 1));		\
-      }									\
-    else								\
-      {									\
-	X##_c = FP_CLS_ZERO, X##_s = 0;					\
-      }									\
-  } while (0)
-
-
-#define FP_CONV(dfs,sfs,dwc,swc,D,S)			\
-  do {							\
-    _FP_FRAC_CONV_##dwc##_##swc(dfs, sfs, D, S);	\
-    D##_e = S##_e;					\
-    D##_c = S##_c;					\
-    D##_s = S##_s;					\
-  } while (0)
-
-/*
- * Helper primitives.
- */
-
-/* Count leading zeros in a word.  */
-
-#ifndef __FP_CLZ
-#if _FP_W_TYPE_SIZE < 64
-/* this is just to shut the compiler up about shifts > word length -- PMM 02/1998 */
-#define __FP_CLZ(r, x)				\
-  do {						\
-    _FP_W_TYPE _t = (x);			\
-    r = _FP_W_TYPE_SIZE - 1;			\
-    if (_t > 0xffff) r -= 16;			\
-    if (_t > 0xffff) _t >>= 16;			\
-    if (_t > 0xff) r -= 8;			\
-    if (_t > 0xff) _t >>= 8;			\
-    if (_t & 0xf0) r -= 4;			\
-    if (_t & 0xf0) _t >>= 4;			\
-    if (_t & 0xc) r -= 2;			\
-    if (_t & 0xc) _t >>= 2;			\
-    if (_t & 0x2) r -= 1;			\
-  } while (0)
-#else /* not _FP_W_TYPE_SIZE < 64 */
-#define __FP_CLZ(r, x)				\
-  do {						\
-    _FP_W_TYPE _t = (x);			\
-    r = _FP_W_TYPE_SIZE - 1;			\
-    if (_t > 0xffffffff) r -= 32;		\
-    if (_t > 0xffffffff) _t >>= 32;		\
-    if (_t > 0xffff) r -= 16;			\
-    if (_t > 0xffff) _t >>= 16;			\
-    if (_t > 0xff) r -= 8;			\
-    if (_t > 0xff) _t >>= 8;			\
-    if (_t & 0xf0) r -= 4;			\
-    if (_t & 0xf0) _t >>= 4;			\
-    if (_t & 0xc) r -= 2;			\
-    if (_t & 0xc) _t >>= 2;			\
-    if (_t & 0x2) r -= 1;			\
-  } while (0)
-#endif /* not _FP_W_TYPE_SIZE < 64 */
-#endif /* ndef __FP_CLZ */
-
-#define _FP_DIV_HELP_imm(q, r, n, d)		\
-  do {						\
-    q = n / d, r = n % d;			\
-  } while (0)
-
diff --git a/arch/ppc/math-emu/sfp-machine.h b/arch/ppc/math-emu/sfp-machine.h
deleted file mode 100644
index 4b17d83..0000000
--- a/arch/ppc/math-emu/sfp-machine.h
+++ /dev/null
@@ -1,377 +0,0 @@
-/* Machine-dependent software floating-point definitions.  PPC version.
-   Copyright (C) 1997 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Library General Public License as
-   published by the Free Software Foundation; either version 2 of the
-   License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Library General Public License for more details.
-
-   You should have received a copy of the GNU Library General Public
-   License along with the GNU C Library; see the file COPYING.LIB.  If
-   not, write to the Free Software Foundation, Inc.,
-   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-   Actually, this is a PPC (32bit) version, written based on the
-   i386, sparc, and sparc64 versions, by me,
-   Peter Maydell (pmaydell@chiark.greenend.org.uk).
-   Comments are by and large also mine, although they may be inaccurate.
-
-   In picking out asm fragments I've gone with the lowest common
-   denominator, which also happens to be the hardware I have :->
-   That is, a SPARC without hardware multiply and divide.
- */
-
-/* basic word size definitions */
-#define _FP_W_TYPE_SIZE		32
-#define _FP_W_TYPE		unsigned long
-#define _FP_WS_TYPE		signed long
-#define _FP_I_TYPE		long
-
-#define __ll_B			((UWtype) 1 << (W_TYPE_SIZE / 2))
-#define __ll_lowpart(t)		((UWtype) (t) & (__ll_B - 1))
-#define __ll_highpart(t)	((UWtype) (t) >> (W_TYPE_SIZE / 2))
-
-/* You can optionally code some things like addition in asm. For
- * example, i386 defines __FP_FRAC_ADD_2 as asm. If you don't
- * then you get a fragment of C code [if you change an #ifdef 0
- * in op-2.h] or a call to add_ssaaaa (see below).
- * Good places to look for asm fragments to use are gcc and glibc.
- * gcc's longlong.h is useful.
- */
-
-/* We need to know how to multiply and divide. If the host word size
- * is >= 2*fracbits you can use FP_MUL_MEAT_n_imm(t,R,X,Y) which
- * codes the multiply with whatever gcc does to 'a * b'.
- * _FP_MUL_MEAT_n_wide(t,R,X,Y,f) is used when you have an asm
- * function that can multiply two 1W values and get a 2W result.
- * Otherwise you're stuck with _FP_MUL_MEAT_n_hard(t,R,X,Y) which
- * does bitshifting to avoid overflow.
- * For division there is FP_DIV_MEAT_n_imm(t,R,X,Y,f) for word size
- * >= 2*fracbits, where f is either _FP_DIV_HELP_imm or
- * _FP_DIV_HELP_ldiv (see op-1.h).
- * _FP_DIV_MEAT_udiv() is if you have asm to do 2W/1W => (1W, 1W).
- * [GCC and glibc have longlong.h which has the asm macro udiv_qrnnd
- * to do this.]
- * In general, 'n' is the number of words required to hold the type,
- * and 't' is either S, D or Q for single/double/quad.
- *           -- PMM
- */
-/* Example: SPARC64:
- * #define _FP_MUL_MEAT_S(R,X,Y)	_FP_MUL_MEAT_1_imm(S,R,X,Y)
- * #define _FP_MUL_MEAT_D(R,X,Y)	_FP_MUL_MEAT_1_wide(D,R,X,Y,umul_ppmm)
- * #define _FP_MUL_MEAT_Q(R,X,Y)	_FP_MUL_MEAT_2_wide(Q,R,X,Y,umul_ppmm)
- *
- * #define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
- * #define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_1_udiv(D,R,X,Y)
- * #define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_2_udiv_64(Q,R,X,Y)
- *
- * Example: i386:
- * #define _FP_MUL_MEAT_S(R,X,Y)   _FP_MUL_MEAT_1_wide(S,R,X,Y,_i386_mul_32_64)
- * #define _FP_MUL_MEAT_D(R,X,Y)   _FP_MUL_MEAT_2_wide(D,R,X,Y,_i386_mul_32_64)
- *
- * #define _FP_DIV_MEAT_S(R,X,Y)   _FP_DIV_MEAT_1_udiv(S,R,X,Y,_i386_div_64_32)
- * #define _FP_DIV_MEAT_D(R,X,Y)   _FP_DIV_MEAT_2_udiv_64(D,R,X,Y)
- */
-
-#define _FP_MUL_MEAT_S(R,X,Y)   _FP_MUL_MEAT_1_wide(S,R,X,Y,umul_ppmm)
-#define _FP_MUL_MEAT_D(R,X,Y)   _FP_MUL_MEAT_2_wide(D,R,X,Y,umul_ppmm)
-
-#define _FP_DIV_MEAT_S(R,X,Y)   _FP_DIV_MEAT_1_udiv(S,R,X,Y)
-#define _FP_DIV_MEAT_D(R,X,Y)   _FP_DIV_MEAT_2_udiv_64(D,R,X,Y)
-
-/* These macros define what NaN looks like. They're supposed to expand to
- * a comma-separated set of 32bit unsigned ints that encode NaN.
- */
-#define _FP_NANFRAC_S		_FP_QNANBIT_S
-#define _FP_NANFRAC_D		_FP_QNANBIT_D, 0
-#define _FP_NANFRAC_Q           _FP_QNANBIT_Q, 0, 0, 0
-
-#define _FP_KEEPNANFRACP 1
-
-/* This macro appears to be called when both X and Y are NaNs, and
- * has to choose one and copy it to R. i386 goes for the larger of the
- * two, sparc64 just picks Y. I don't understand this at all so I'll
- * go with sparc64 because it's shorter :->   -- PMM
- */
-#define _FP_CHOOSENAN(fs, wc, R, X, Y)			\
-  do {							\
-    R##_s = Y##_s;					\
-    _FP_FRAC_COPY_##wc(R,Y);				\
-    R##_c = FP_CLS_NAN;					\
-  } while (0)
-
-
-extern void fp_unpack_d(long *, unsigned long *, unsigned long *,
-			long *, long *, void *);
-extern int  fp_pack_d(void *, long, unsigned long, unsigned long, long, long);
-extern int  fp_pack_ds(void *, long, unsigned long, unsigned long, long, long);
-
-#define __FP_UNPACK_RAW_1(fs, X, val)			\
-  do {							\
-    union _FP_UNION_##fs *_flo =			\
-    	(union _FP_UNION_##fs *)val;			\
-							\
-    X##_f = _flo->bits.frac;				\
-    X##_e = _flo->bits.exp;				\
-    X##_s = _flo->bits.sign;				\
-  } while (0)
-
-#define __FP_UNPACK_RAW_2(fs, X, val)			\
-  do {							\
-    union _FP_UNION_##fs *_flo =			\
-    	(union _FP_UNION_##fs *)val;			\
-							\
-    X##_f0 = _flo->bits.frac0;				\
-    X##_f1 = _flo->bits.frac1;				\
-    X##_e  = _flo->bits.exp;				\
-    X##_s  = _flo->bits.sign;				\
-  } while (0)
-
-#define __FP_UNPACK_S(X,val)		\
-  do {					\
-    __FP_UNPACK_RAW_1(S,X,val);		\
-    _FP_UNPACK_CANONICAL(S,1,X);	\
-  } while (0)
-
-#define __FP_UNPACK_D(X,val)		\
-	fp_unpack_d(&X##_s, &X##_f1, &X##_f0, &X##_e, &X##_c, val)
-
-#define __FP_PACK_RAW_1(fs, val, X)			\
-  do {							\
-    union _FP_UNION_##fs *_flo =			\
-    	(union _FP_UNION_##fs *)val;			\
-							\
-    _flo->bits.frac = X##_f;				\
-    _flo->bits.exp  = X##_e;				\
-    _flo->bits.sign = X##_s;				\
-  } while (0)
-
-#define __FP_PACK_RAW_2(fs, val, X)			\
-  do {							\
-    union _FP_UNION_##fs *_flo =			\
-    	(union _FP_UNION_##fs *)val;			\
-							\
-    _flo->bits.frac0 = X##_f0;				\
-    _flo->bits.frac1 = X##_f1;				\
-    _flo->bits.exp   = X##_e;				\
-    _flo->bits.sign  = X##_s;				\
-  } while (0)
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#define __FPU_FPSCR	(current->thread.fpscr.val)
-
-/* We only actually write to the destination register
- * if exceptions signalled (if any) will not trap.
- */
-#define __FPU_ENABLED_EXC \
-({						\
-	(__FPU_FPSCR >> 3) & 0x1f;	\
-})
-
-#define __FPU_TRAP_P(bits) \
-	((__FPU_ENABLED_EXC & (bits)) != 0)
-
-#define __FP_PACK_S(val,X)			\
-({  int __exc = _FP_PACK_CANONICAL(S,1,X);	\
-    if(!__exc || !__FPU_TRAP_P(__exc))		\
-        __FP_PACK_RAW_1(S,val,X);		\
-    __exc;					\
-})
-
-#define __FP_PACK_D(val,X)			\
-	fp_pack_d(val, X##_s, X##_f1, X##_f0, X##_e, X##_c)
-
-#define __FP_PACK_DS(val,X)			\
-	fp_pack_ds(val, X##_s, X##_f1, X##_f0, X##_e, X##_c)
-
-/* Obtain the current rounding mode. */
-#define FP_ROUNDMODE			\
-({					\
-	__FPU_FPSCR & 0x3;		\
-})
-
-/* the asm fragments go here: all these are taken from glibc-2.0.5's
- * stdlib/longlong.h
- */
-
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/* add_ssaaaa is used in op-2.h and should be equivalent to
- * #define add_ssaaaa(sh,sl,ah,al,bh,bl) (sh = ah+bh+ (( sl = al+bl) < al))
- * add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1,
- * high_addend_2, low_addend_2) adds two UWtype integers, composed by
- * HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and LOW_ADDEND_2
- * respectively.  The result is placed in HIGH_SUM and LOW_SUM.  Overflow
- * (i.e. carry out) is not stored anywhere, and is lost.
- */
-#define add_ssaaaa(sh, sl, ah, al, bh, bl)				\
-  do {									\
-    if (__builtin_constant_p (bh) && (bh) == 0)				\
-      __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2"		\
-	     : "=r" ((USItype)(sh)),					\
-	       "=&r" ((USItype)(sl))					\
-	     : "%r" ((USItype)(ah)),					\
-	       "%r" ((USItype)(al)),					\
-	       "rI" ((USItype)(bl)));					\
-    else if (__builtin_constant_p (bh) && (bh) ==~(USItype) 0)		\
-      __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2"		\
-	     : "=r" ((USItype)(sh)),					\
-	       "=&r" ((USItype)(sl))					\
-	     : "%r" ((USItype)(ah)),					\
-	       "%r" ((USItype)(al)),					\
-	       "rI" ((USItype)(bl)));					\
-    else								\
-      __asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3"		\
-	     : "=r" ((USItype)(sh)),					\
-	       "=&r" ((USItype)(sl))					\
-	     : "%r" ((USItype)(ah)),					\
-	       "r" ((USItype)(bh)),					\
-	       "%r" ((USItype)(al)),					\
-	       "rI" ((USItype)(bl)));					\
-  } while (0)
-
-/* sub_ddmmss is used in op-2.h and udivmodti4.c and should be equivalent to
- * #define sub_ddmmss(sh, sl, ah, al, bh, bl) (sh = ah-bh - ((sl = al-bl) > al))
- * sub_ddmmss(high_difference, low_difference, high_minuend, low_minuend,
- * high_subtrahend, low_subtrahend) subtracts two two-word UWtype integers,
- * composed by HIGH_MINUEND_1 and LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and
- * LOW_SUBTRAHEND_2 respectively.  The result is placed in HIGH_DIFFERENCE
- * and LOW_DIFFERENCE.  Overflow (i.e. carry out) is not stored anywhere,
- * and is lost.
- */
-#define sub_ddmmss(sh, sl, ah, al, bh, bl)				\
-  do {									\
-    if (__builtin_constant_p (ah) && (ah) == 0)				\
-      __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2"	\
-	       : "=r" ((USItype)(sh)),					\
-		 "=&r" ((USItype)(sl))					\
-	       : "r" ((USItype)(bh)),					\
-		 "rI" ((USItype)(al)),					\
-		 "r" ((USItype)(bl)));					\
-    else if (__builtin_constant_p (ah) && (ah) ==~(USItype) 0)		\
-      __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2"	\
-	       : "=r" ((USItype)(sh)),					\
-		 "=&r" ((USItype)(sl))					\
-	       : "r" ((USItype)(bh)),					\
-		 "rI" ((USItype)(al)),					\
-		 "r" ((USItype)(bl)));					\
-    else if (__builtin_constant_p (bh) && (bh) == 0)			\
-      __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2"		\
-	       : "=r" ((USItype)(sh)),					\
-		 "=&r" ((USItype)(sl))					\
-	       : "r" ((USItype)(ah)),					\
-		 "rI" ((USItype)(al)),					\
-		 "r" ((USItype)(bl)));					\
-    else if (__builtin_constant_p (bh) && (bh) ==~(USItype) 0)		\
-      __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2"		\
-	       : "=r" ((USItype)(sh)),					\
-		 "=&r" ((USItype)(sl))					\
-	       : "r" ((USItype)(ah)),					\
-		 "rI" ((USItype)(al)),					\
-		 "r" ((USItype)(bl)));					\
-    else								\
-      __asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2"	\
-	       : "=r" ((USItype)(sh)),					\
-		 "=&r" ((USItype)(sl))					\
-	       : "r" ((USItype)(ah)),					\
-		 "r" ((USItype)(bh)),					\
-		 "rI" ((USItype)(al)),					\
-		 "r" ((USItype)(bl)));					\
-  } while (0)
-
-/* asm fragments for mul and div */
-
-/* umul_ppmm(high_prod, low_prod, multipler, multiplicand) multiplies two
- * UWtype integers MULTIPLER and MULTIPLICAND, and generates a two UWtype
- * word product in HIGH_PROD and LOW_PROD.
- */
-#define umul_ppmm(ph, pl, m0, m1)					\
-  do {									\
-    USItype __m0 = (m0), __m1 = (m1);					\
-    __asm__ ("mulhwu %0,%1,%2"						\
-	     : "=r" ((USItype)(ph))					\
-	     : "%r" (__m0),						\
-               "r" (__m1));						\
-    (pl) = __m0 * __m1;							\
-  } while (0)
-
-/* udiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
- * denominator) divides a UDWtype, composed by the UWtype integers
- * HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and places the quotient
- * in QUOTIENT and the remainder in REMAINDER.  HIGH_NUMERATOR must be less
- * than DENOMINATOR for correct operation.  If, in addition, the most
- * significant bit of DENOMINATOR must be 1, then the pre-processor symbol
- * UDIV_NEEDS_NORMALIZATION is defined to 1.
- */
-#define udiv_qrnnd(q, r, n1, n0, d)					\
-  do {									\
-    UWtype __d1, __d0, __q1, __q0, __r1, __r0, __m;			\
-    __d1 = __ll_highpart (d);						\
-    __d0 = __ll_lowpart (d);						\
-									\
-    __r1 = (n1) % __d1;							\
-    __q1 = (n1) / __d1;							\
-    __m = (UWtype) __q1 * __d0;						\
-    __r1 = __r1 * __ll_B | __ll_highpart (n0);				\
-    if (__r1 < __m)							\
-      {									\
-	__q1--, __r1 += (d);						\
-	if (__r1 >= (d)) /* we didn't get carry when adding to __r1 */	\
-	  if (__r1 < __m)						\
-	    __q1--, __r1 += (d);					\
-      }									\
-    __r1 -= __m;							\
-									\
-    __r0 = __r1 % __d1;							\
-    __q0 = __r1 / __d1;							\
-    __m = (UWtype) __q0 * __d0;						\
-    __r0 = __r0 * __ll_B | __ll_lowpart (n0);				\
-    if (__r0 < __m)							\
-      {									\
-	__q0--, __r0 += (d);						\
-	if (__r0 >= (d))						\
-	  if (__r0 < __m)						\
-	    __q0--, __r0 += (d);					\
-      }									\
-    __r0 -= __m;							\
-									\
-    (q) = (UWtype) __q1 * __ll_B | __q0;				\
-    (r) = __r0;								\
-  } while (0)
-
-#define UDIV_NEEDS_NORMALIZATION 1
-
-#define abort()								\
-	return 0
-
-#ifdef __BIG_ENDIAN
-#define __BYTE_ORDER __BIG_ENDIAN
-#else
-#define __BYTE_ORDER __LITTLE_ENDIAN
-#endif
-
-/* Exception flags. */
-#define EFLAG_INVALID		(1 << (31 - 2))
-#define EFLAG_OVERFLOW		(1 << (31 - 3))
-#define EFLAG_UNDERFLOW		(1 << (31 - 4))
-#define EFLAG_DIVZERO		(1 << (31 - 5))
-#define EFLAG_INEXACT		(1 << (31 - 6))
-
-#define EFLAG_VXSNAN		(1 << (31 - 7))
-#define EFLAG_VXISI		(1 << (31 - 8))
-#define EFLAG_VXIDI		(1 << (31 - 9))
-#define EFLAG_VXZDZ		(1 << (31 - 10))
-#define EFLAG_VXIMZ		(1 << (31 - 11))
-#define EFLAG_VXVC		(1 << (31 - 12))
-#define EFLAG_VXSOFT		(1 << (31 - 21))
-#define EFLAG_VXSQRT		(1 << (31 - 22))
-#define EFLAG_VXCVI		(1 << (31 - 23))
diff --git a/arch/ppc/math-emu/single.h b/arch/ppc/math-emu/single.h
deleted file mode 100644
index f19d994..0000000
--- a/arch/ppc/math-emu/single.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Definitions for IEEE Single Precision
- */
-
-#if _FP_W_TYPE_SIZE < 32
-#error "Here's a nickel kid.  Go buy yourself a real computer."
-#endif
-
-#define _FP_FRACBITS_S		24
-#define _FP_FRACXBITS_S		(_FP_W_TYPE_SIZE - _FP_FRACBITS_S)
-#define _FP_WFRACBITS_S		(_FP_WORKBITS + _FP_FRACBITS_S)
-#define _FP_WFRACXBITS_S	(_FP_W_TYPE_SIZE - _FP_WFRACBITS_S)
-#define _FP_EXPBITS_S		8
-#define _FP_EXPBIAS_S		127
-#define _FP_EXPMAX_S		255
-#define _FP_QNANBIT_S		((_FP_W_TYPE)1 << (_FP_FRACBITS_S-2))
-#define _FP_IMPLBIT_S		((_FP_W_TYPE)1 << (_FP_FRACBITS_S-1))
-#define _FP_OVERFLOW_S		((_FP_W_TYPE)1 << (_FP_WFRACBITS_S))
-
-/* The implementation of _FP_MUL_MEAT_S and _FP_DIV_MEAT_S should be
-   chosen by the target machine.  */
-
-union _FP_UNION_S
-{
-  float flt;
-  struct {
-#if __BYTE_ORDER == __BIG_ENDIAN
-    unsigned sign : 1;
-    unsigned exp  : _FP_EXPBITS_S;
-    unsigned frac : _FP_FRACBITS_S - (_FP_IMPLBIT_S != 0);
-#else
-    unsigned frac : _FP_FRACBITS_S - (_FP_IMPLBIT_S != 0);
-    unsigned exp  : _FP_EXPBITS_S;
-    unsigned sign : 1;
-#endif
-  } bits __attribute__((packed));
-};
-
-#define FP_DECL_S(X)		_FP_DECL(1,X)
-#define FP_UNPACK_RAW_S(X,val)	_FP_UNPACK_RAW_1(S,X,val)
-#define FP_PACK_RAW_S(val,X)	_FP_PACK_RAW_1(S,val,X)
-
-#define FP_UNPACK_S(X,val)		\
-  do {					\
-    _FP_UNPACK_RAW_1(S,X,val);		\
-    _FP_UNPACK_CANONICAL(S,1,X);	\
-  } while (0)
-
-#define FP_PACK_S(val,X)		\
-  do {					\
-    _FP_PACK_CANONICAL(S,1,X);		\
-    _FP_PACK_RAW_1(S,val,X);		\
-  } while (0)
-
-#define FP_NEG_S(R,X)		_FP_NEG(S,1,R,X)
-#define FP_ADD_S(R,X,Y)		_FP_ADD(S,1,R,X,Y)
-#define FP_SUB_S(R,X,Y)		_FP_SUB(S,1,R,X,Y)
-#define FP_MUL_S(R,X,Y)		_FP_MUL(S,1,R,X,Y)
-#define FP_DIV_S(R,X,Y)		_FP_DIV(S,1,R,X,Y)
-#define FP_SQRT_S(R,X)		_FP_SQRT(S,1,R,X)
-
-#define FP_CMP_S(r,X,Y,un)	_FP_CMP(S,1,r,X,Y,un)
-#define FP_CMP_EQ_S(r,X,Y)	_FP_CMP_EQ(S,1,r,X,Y)
-
-#define FP_TO_INT_S(r,X,rsz,rsg)  _FP_TO_INT(S,1,r,X,rsz,rsg)
-#define FP_FROM_INT_S(X,r,rs,rt)  _FP_FROM_INT(S,1,X,r,rs,rt)
diff --git a/arch/ppc/math-emu/soft-fp.h b/arch/ppc/math-emu/soft-fp.h
deleted file mode 100644
index cca3959..0000000
--- a/arch/ppc/math-emu/soft-fp.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef SOFT_FP_H
-#define SOFT_FP_H
-
-#include "sfp-machine.h"
-
-#define _FP_WORKBITS		3
-#define _FP_WORK_LSB		((_FP_W_TYPE)1 << 3)
-#define _FP_WORK_ROUND		((_FP_W_TYPE)1 << 2)
-#define _FP_WORK_GUARD		((_FP_W_TYPE)1 << 1)
-#define _FP_WORK_STICKY		((_FP_W_TYPE)1 << 0)
-
-#ifndef FP_RND_NEAREST
-# define FP_RND_NEAREST		0
-# define FP_RND_ZERO		1
-# define FP_RND_PINF		2
-# define FP_RND_MINF		3
-#ifndef FP_ROUNDMODE
-# define FP_ROUNDMODE		FP_RND_NEAREST
-#endif
-#endif
-
-#define _FP_ROUND_NEAREST(wc, X)			\
-({  int __ret = 0;					\
-    int __frac = _FP_FRAC_LOW_##wc(X) & 15;		\
-    if (__frac & 7) {					\
-      __ret = EFLAG_INEXACT;				\
-      if ((__frac & 7) != _FP_WORK_ROUND)		\
-        _FP_FRAC_ADDI_##wc(X, _FP_WORK_ROUND);		\
-      else if (__frac & _FP_WORK_LSB)			\
-        _FP_FRAC_ADDI_##wc(X, _FP_WORK_ROUND);		\
-    }							\
-    __ret;						\
-})
-
-#define _FP_ROUND_ZERO(wc, X)				\
-({  int __ret = 0;					\
-    if (_FP_FRAC_LOW_##wc(X) & 7)			\
-      __ret = EFLAG_INEXACT;				\
-    __ret;						\
-})
-
-#define _FP_ROUND_PINF(wc, X)				\
-({  int __ret = EFLAG_INEXACT;				\
-    if (!X##_s && (_FP_FRAC_LOW_##wc(X) & 7))		\
-      _FP_FRAC_ADDI_##wc(X, _FP_WORK_LSB);		\
-    else __ret = 0;					\
-    __ret;						\
-})
-
-#define _FP_ROUND_MINF(wc, X)				\
-({  int __ret = EFLAG_INEXACT;				\
-    if (X##_s && (_FP_FRAC_LOW_##wc(X) & 7))		\
-      _FP_FRAC_ADDI_##wc(X, _FP_WORK_LSB);		\
-    else __ret = 0;					\
-    __ret;						\
-})
-
-#define _FP_ROUND(wc, X)			\
-({	int __ret = 0;				\
-	switch (FP_ROUNDMODE)			\
-	{					\
-	  case FP_RND_NEAREST:			\
-	    __ret |= _FP_ROUND_NEAREST(wc,X);	\
-	    break;				\
-	  case FP_RND_ZERO:			\
-	    __ret |= _FP_ROUND_ZERO(wc,X);	\
-	    break;				\
-	  case FP_RND_PINF:			\
-	    __ret |= _FP_ROUND_PINF(wc,X);	\
-	    break;				\
-	  case FP_RND_MINF:			\
-	    __ret |= _FP_ROUND_MINF(wc,X);	\
-	    break;				\
-	};					\
-	__ret;					\
-})
-
-#define FP_CLS_NORMAL		0
-#define FP_CLS_ZERO		1
-#define FP_CLS_INF		2
-#define FP_CLS_NAN		3
-
-#define _FP_CLS_COMBINE(x,y)	(((x) << 2) | (y))
-
-#include "op-1.h"
-#include "op-2.h"
-#include "op-4.h"
-#include "op-common.h"
-
-/* Sigh.  Silly things longlong.h needs.  */
-#define UWtype		_FP_W_TYPE
-#define W_TYPE_SIZE	_FP_W_TYPE_SIZE
-
-typedef int SItype __attribute__((mode(SI)));
-typedef int DItype __attribute__((mode(DI)));
-typedef unsigned int USItype __attribute__((mode(SI)));
-typedef unsigned int UDItype __attribute__((mode(DI)));
-#if _FP_W_TYPE_SIZE == 32
-typedef unsigned int UHWtype __attribute__((mode(HI)));
-#elif _FP_W_TYPE_SIZE == 64
-typedef USItype UHWtype;
-#endif
-
-#endif
diff --git a/arch/ppc/math-emu/stfd.c b/arch/ppc/math-emu/stfd.c
deleted file mode 100644
index 3f8c255..0000000
--- a/arch/ppc/math-emu/stfd.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-int
-stfd(void *frS, void *ea)
-{
-#if 0
-#ifdef DEBUG
-	printk("%s: S %p, ea %p: ", __FUNCTION__, frS, ea);
-	dump_double(frS);
-	printk("\n");
-#endif
-#endif
-
-	if (copy_to_user(ea, frS, sizeof(double)))
-		return -EFAULT;
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/stfiwx.c b/arch/ppc/math-emu/stfiwx.c
deleted file mode 100644
index 95caaee..0000000
--- a/arch/ppc/math-emu/stfiwx.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-int
-stfiwx(u32 *frS, void *ea)
-{
-#ifdef DEBUG
-	printk("%s: %p %p\n", __FUNCTION__, frS, ea);
-#endif
-
-	if (copy_to_user(ea, &frS[1], sizeof(frS[1])))
-		return -EFAULT;
-
-	return 0;
-}
diff --git a/arch/ppc/math-emu/stfs.c b/arch/ppc/math-emu/stfs.c
deleted file mode 100644
index e87ca23..0000000
--- a/arch/ppc/math-emu/stfs.c
+++ /dev/null
@@ -1,41 +0,0 @@
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <asm/uaccess.h>
-
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-int
-stfs(void *frS, void *ea)
-{
-	FP_DECL_D(A);
-	FP_DECL_S(R);
-	float f;
-	int err;
-
-#ifdef DEBUG
-	printk("%s: S %p, ea %p\n", __FUNCTION__, frS, ea);
-#endif
-
-	__FP_UNPACK_D(A, frS);
-
-#ifdef DEBUG
-	printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
-#endif
-
-	FP_CONV(S, D, 1, 2, R, A);
-
-#ifdef DEBUG
-	printk("R: %ld %lu %ld (%ld)\n", R_s, R_f, R_e, R_c);
-#endif
-
-	err = _FP_PACK_CANONICAL(S, 1, R);
-	if (!err || !__FPU_TRAP_P(err)) {
-		__FP_PACK_RAW_1(S, &f, R);
-		if (copy_to_user(ea, &f, sizeof(float)))
-			return -EFAULT;
-	}
-
-	return err;
-}
diff --git a/arch/ppc/math-emu/types.c b/arch/ppc/math-emu/types.c
deleted file mode 100644
index e1ed15d..0000000
--- a/arch/ppc/math-emu/types.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include "soft-fp.h"
-#include "double.h"
-#include "single.h"
-
-void
-fp_unpack_d(long *_s, unsigned long *_f1, unsigned long *_f0,
-	    long *_e, long *_c, void *val)
-{
-	FP_DECL_D(X);
-
-	__FP_UNPACK_RAW_2(D, X, val);
-
-	_FP_UNPACK_CANONICAL(D, 2, X);
-
-	*_s = X_s;
-	*_f1 = X_f1;
-	*_f0 = X_f0;
-	*_e = X_e;
-	*_c = X_c;
-}
-
-int
-fp_pack_d(void *val, long X_s, unsigned long X_f1,
-	  unsigned long X_f0, long X_e, long X_c)
-{
-	int exc;
-
-	exc = _FP_PACK_CANONICAL(D, 2, X);
-	if (!exc || !__FPU_TRAP_P(exc))
-		__FP_PACK_RAW_2(D, val, X);
-	return exc;
-}
-
-int
-fp_pack_ds(void *val, long X_s, unsigned long X_f1,
-	   unsigned long X_f0, long X_e, long X_c)
-{
-	FP_DECL_S(__X);
-	int exc;
-
-	FP_CONV(S, D, 1, 2, __X, X);
-	exc = _FP_PACK_CANONICAL(S, 1, __X);
-	if (!exc || !__FPU_TRAP_P(exc)) {
-		_FP_UNPACK_CANONICAL(S, 1, __X);
-		FP_CONV(D, S, 2, 1, X, __X);
-		exc |= _FP_PACK_CANONICAL(D, 2, X);
-		if (!exc || !__FPU_TRAP_P(exc))
-			__FP_PACK_RAW_2(D, val, X);
-	}
-	return exc;
-}
diff --git a/arch/ppc/math-emu/udivmodti4.c b/arch/ppc/math-emu/udivmodti4.c
deleted file mode 100644
index 7e112dc..0000000
--- a/arch/ppc/math-emu/udivmodti4.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/* This has so very few changes over libgcc2's __udivmoddi4 it isn't funny.  */
-
-#include "soft-fp.h"
-
-#undef count_leading_zeros
-#define count_leading_zeros  __FP_CLZ
-
-void
-_fp_udivmodti4(_FP_W_TYPE q[2], _FP_W_TYPE r[2],
-	       _FP_W_TYPE n1, _FP_W_TYPE n0,
-	       _FP_W_TYPE d1, _FP_W_TYPE d0)
-{
-  _FP_W_TYPE q0, q1, r0, r1;
-  _FP_I_TYPE b, bm;
-
-  if (d1 == 0)
-    {
-#if !UDIV_NEEDS_NORMALIZATION
-      if (d0 > n1)
-	{
-	  /* 0q = nn / 0D */
-
-	  udiv_qrnnd (q0, n0, n1, n0, d0);
-	  q1 = 0;
-
-	  /* Remainder in n0.  */
-	}
-      else
-	{
-	  /* qq = NN / 0d */
-
-	  if (d0 == 0)
-	    d0 = 1 / d0;	/* Divide intentionally by zero.  */
-
-	  udiv_qrnnd (q1, n1, 0, n1, d0);
-	  udiv_qrnnd (q0, n0, n1, n0, d0);
-
-	  /* Remainder in n0.  */
-	}
-
-      r0 = n0;
-      r1 = 0;
-
-#else /* UDIV_NEEDS_NORMALIZATION */
-
-      if (d0 > n1)
-	{
-	  /* 0q = nn / 0D */
-
-	  count_leading_zeros (bm, d0);
-
-	  if (bm != 0)
-	    {
-	      /* Normalize, i.e. make the most significant bit of the
-		 denominator set.  */
-
-	      d0 = d0 << bm;
-	      n1 = (n1 << bm) | (n0 >> (_FP_W_TYPE_SIZE - bm));
-	      n0 = n0 << bm;
-	    }
-
-	  udiv_qrnnd (q0, n0, n1, n0, d0);
-	  q1 = 0;
-
-	  /* Remainder in n0 >> bm.  */
-	}
-      else
-	{
-	  /* qq = NN / 0d */
-
-	  if (d0 == 0)
-	    d0 = 1 / d0;	/* Divide intentionally by zero.  */
-
-	  count_leading_zeros (bm, d0);
-
-	  if (bm == 0)
-	    {
-	      /* From (n1 >= d0) /\ (the most significant bit of d0 is set),
-		 conclude (the most significant bit of n1 is set) /\ (the
-		 leading quotient digit q1 = 1).
-
-		 This special case is necessary, not an optimization.
-		 (Shifts counts of SI_TYPE_SIZE are undefined.)  */
-
-	      n1 -= d0;
-	      q1 = 1;
-	    }
-	  else
-	    {
-	      _FP_W_TYPE n2;
-
-	      /* Normalize.  */
-
-	      b = _FP_W_TYPE_SIZE - bm;
-
-	      d0 = d0 << bm;
-	      n2 = n1 >> b;
-	      n1 = (n1 << bm) | (n0 >> b);
-	      n0 = n0 << bm;
-
-	      udiv_qrnnd (q1, n1, n2, n1, d0);
-	    }
-
-	  /* n1 != d0...  */
-
-	  udiv_qrnnd (q0, n0, n1, n0, d0);
-
-	  /* Remainder in n0 >> bm.  */
-	}
-
-      r0 = n0 >> bm;
-      r1 = 0;
-#endif /* UDIV_NEEDS_NORMALIZATION */
-    }
-  else
-    {
-      if (d1 > n1)
-	{
-	  /* 00 = nn / DD */
-
-	  q0 = 0;
-	  q1 = 0;
-
-	  /* Remainder in n1n0.  */
-	  r0 = n0;
-	  r1 = n1;
-	}
-      else
-	{
-	  /* 0q = NN / dd */
-
-	  count_leading_zeros (bm, d1);
-	  if (bm == 0)
-	    {
-	      /* From (n1 >= d1) /\ (the most significant bit of d1 is set),
-		 conclude (the most significant bit of n1 is set) /\ (the
-		 quotient digit q0 = 0 or 1).
-
-		 This special case is necessary, not an optimization.  */
-
-	      /* The condition on the next line takes advantage of that
-		 n1 >= d1 (true due to program flow).  */
-	      if (n1 > d1 || n0 >= d0)
-		{
-		  q0 = 1;
-		  sub_ddmmss (n1, n0, n1, n0, d1, d0);
-		}
-	      else
-		q0 = 0;
-
-	      q1 = 0;
-
-	      r0 = n0;
-	      r1 = n1;
-	    }
-	  else
-	    {
-	      _FP_W_TYPE m1, m0, n2;
-
-	      /* Normalize.  */
-
-	      b = _FP_W_TYPE_SIZE - bm;
-
-	      d1 = (d1 << bm) | (d0 >> b);
-	      d0 = d0 << bm;
-	      n2 = n1 >> b;
-	      n1 = (n1 << bm) | (n0 >> b);
-	      n0 = n0 << bm;
-
-	      udiv_qrnnd (q0, n1, n2, n1, d1);
-	      umul_ppmm (m1, m0, q0, d0);
-
-	      if (m1 > n1 || (m1 == n1 && m0 > n0))
-		{
-		  q0--;
-		  sub_ddmmss (m1, m0, m1, m0, d1, d0);
-		}
-
-	      q1 = 0;
-
-	      /* Remainder in (n1n0 - m1m0) >> bm.  */
-	      sub_ddmmss (n1, n0, n1, n0, m1, m0);
-	      r0 = (n1 << b) | (n0 >> bm);
-	      r1 = n1 >> bm;
-	    }
-	}
-    }
-
-  q[0] = q0; q[1] = q1;
-  r[0] = r0, r[1] = r1;
-}
diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c
index 0217188..8e08ca3 100644
--- a/arch/ppc/mm/fault.c
+++ b/arch/ppc/mm/fault.c
@@ -202,6 +202,7 @@ good_area:
 	/* an exec  - 4xx/Book-E allows for per-page execute permission */
 	} else if (TRAP(regs) == 0x400) {
 		pte_t *ptep;
+		pmd_t *pmdp;
 
 #if 0
 		/* It would be nice to actually enforce the VM execute
@@ -215,21 +216,24 @@ good_area:
 		/* Since 4xx/Book-E supports per-page execute permission,
 		 * we lazily flush dcache to icache. */
 		ptep = NULL;
-		if (get_pteptr(mm, address, &ptep) && pte_present(*ptep)) {
-			struct page *page = pte_page(*ptep);
-
-			if (! test_bit(PG_arch_1, &page->flags)) {
-				flush_dcache_icache_page(page);
-				set_bit(PG_arch_1, &page->flags);
+		if (get_pteptr(mm, address, &ptep, &pmdp)) {
+			spinlock_t *ptl = pte_lockptr(mm, pmdp);
+			spin_lock(ptl);
+			if (pte_present(*ptep)) {
+				struct page *page = pte_page(*ptep);
+
+				if (!test_bit(PG_arch_1, &page->flags)) {
+					flush_dcache_icache_page(page);
+					set_bit(PG_arch_1, &page->flags);
+				}
+				pte_update(ptep, 0, _PAGE_HWEXEC);
+				_tlbie(address);
+				pte_unmap_unlock(ptep, ptl);
+				up_read(&mm->mmap_sem);
+				return 0;
 			}
-			pte_update(ptep, 0, _PAGE_HWEXEC);
-			_tlbie(address);
-			pte_unmap(ptep);
-			up_read(&mm->mmap_sem);
-			return 0;
+			pte_unmap_unlock(ptep, ptl);
 		}
-		if (ptep != NULL)
-			pte_unmap(ptep);
 #endif
 	/* a read */
 	} else {
diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S
index f09fa88..31d0a92 100644
--- a/arch/ppc/mm/hashtable.S
+++ b/arch/ppc/mm/hashtable.S
@@ -74,12 +74,6 @@ _GLOBAL(hash_page_sync)
  */
 	.text
 _GLOBAL(hash_page)
-#ifdef CONFIG_PPC64BRIDGE
-	mfmsr	r0
-	clrldi	r0,r0,1		/* make sure it's in 32-bit mode */
-	MTMSRD(r0)
-	isync
-#endif
 	tophys(r7,0)			/* gets -KERNELBASE into r7 */
 #ifdef CONFIG_SMP
 	addis	r8,r7,mmu_hash_lock@h
@@ -303,7 +297,6 @@ Hash_base = 0xc0180000
 Hash_bits = 12				/* e.g. 256kB hash table */
 Hash_msk = (((1 << Hash_bits) - 1) * 64)
 
-#ifndef CONFIG_PPC64BRIDGE
 /* defines for the PTE format for 32-bit PPCs */
 #define PTE_SIZE	8
 #define PTEG_SIZE	64
@@ -317,21 +310,6 @@ Hash_msk = (((1 << Hash_bits) - 1) * 64)
 #define SET_V(r)	oris r,r,PTE_V@h
 #define CLR_V(r,t)	rlwinm r,r,0,1,31
 
-#else
-/* defines for the PTE format for 64-bit PPCs */
-#define PTE_SIZE	16
-#define PTEG_SIZE	128
-#define LG_PTEG_SIZE	7
-#define LDPTEu		ldu
-#define STPTE		std
-#define CMPPTE		cmpd
-#define PTE_H		2
-#define PTE_V		1
-#define TST_V(r)	andi. r,r,PTE_V
-#define SET_V(r)	ori r,r,PTE_V
-#define CLR_V(r,t)	li t,PTE_V; andc r,r,t
-#endif /* CONFIG_PPC64BRIDGE */
-
 #define HASH_LEFT	31-(LG_PTEG_SIZE+Hash_bits-1)
 #define HASH_RIGHT	31-LG_PTEG_SIZE
 
@@ -349,14 +327,8 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
 
 	/* Construct the high word of the PPC-style PTE (r5) */
-#ifndef CONFIG_PPC64BRIDGE
 	rlwinm	r5,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
 	rlwimi	r5,r4,10,26,31		/* put in API (abbrev page index) */
-#else /* CONFIG_PPC64BRIDGE */
-	clrlwi	r3,r3,8			/* reduce vsid to 24 bits */
-	sldi	r5,r3,12		/* shift vsid into position */
-	rlwimi	r5,r4,16,20,24		/* put in API (abbrev page index) */
-#endif /* CONFIG_PPC64BRIDGE */
 	SET_V(r5)			/* set V (valid) bit */
 
 	/* Get the address of the primary PTE group in the hash table (r3) */
@@ -540,14 +512,8 @@ _GLOBAL(flush_hash_pages)
 	add	r3,r3,r0		/* note code below trims to 24 bits */
 
 	/* Construct the high word of the PPC-style PTE (r11) */
-#ifndef CONFIG_PPC64BRIDGE
 	rlwinm	r11,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
 	rlwimi	r11,r4,10,26,31		/* put in API (abbrev page index) */
-#else /* CONFIG_PPC64BRIDGE */
-	clrlwi	r3,r3,8			/* reduce vsid to 24 bits */
-	sldi	r11,r3,12		/* shift vsid into position */
-	rlwimi	r11,r4,16,20,24		/* put in API (abbrev page index) */
-#endif /* CONFIG_PPC64BRIDGE */
 	SET_V(r11)			/* set V (valid) bit */
 
 #ifdef CONFIG_SMP
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index cb1c294..386e000 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -412,14 +412,6 @@ void __init mem_init(void)
 	}
 #endif /* CONFIG_BLK_DEV_INITRD */
 
-#ifdef CONFIG_PPC_OF
-	/* mark the RTAS pages as reserved */
-	if ( rtas_data )
-		for (addr = (ulong)__va(rtas_data);
-		     addr < PAGE_ALIGN((ulong)__va(rtas_data)+rtas_size) ;
-		     addr += PAGE_SIZE)
-			SetPageReserved(virt_to_page(addr));
-#endif
 	for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory;
 	     addr += PAGE_SIZE) {
 		if (!PageReserved(virt_to_page(addr)))
@@ -494,11 +486,6 @@ set_phys_avail(unsigned long total_memory)
 				  initrd_end - initrd_start, 1);
 	}
 #endif /* CONFIG_BLK_DEV_INITRD */
-#ifdef CONFIG_PPC_OF
-	/* remove the RTAS pages from the available memory */
-	if (rtas_data)
-		mem_pieces_remove(&phys_avail, rtas_data, rtas_size, 1);
-#endif
 }
 
 /* Mark some memory as reserved by removing it from phys_avail. */
diff --git a/arch/ppc/mm/mmu_context.c b/arch/ppc/mm/mmu_context.c
index a8816e0..b4a4b3f 100644
--- a/arch/ppc/mm/mmu_context.c
+++ b/arch/ppc/mm/mmu_context.c
@@ -2,7 +2,7 @@
  * This file contains the routines for handling the MMU on those
  * PowerPC implementations where the MMU substantially follows the
  * architecture specification.  This includes the 6xx, 7xx, 7xxx,
- * 8260, and POWER3 implementations but excludes the 8xx and 4xx.
+ * 8260, and 83xx implementations but excludes the 8xx and 4xx.
  *  -- paulus
  *
  *  Derived from arch/ppc/mm/init.c:
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
index 6ea9185..706bca8 100644
--- a/arch/ppc/mm/pgtable.c
+++ b/arch/ppc/mm/pgtable.c
@@ -39,7 +39,7 @@ unsigned long ioremap_base;
 unsigned long ioremap_bot;
 int io_bat_index;
 
-#if defined(CONFIG_6xx) || defined(CONFIG_POWER3)
+#if defined(CONFIG_6xx)
 #define HAVE_BATS	1
 #endif
 
@@ -368,7 +368,7 @@ void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
  * the PTE pointer is unmodified if PTE is not found.
  */
 int
-get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
+get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp)
 {
         pgd_t	*pgd;
         pmd_t	*pmd;
@@ -383,6 +383,8 @@ get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
                         if (pte) {
 				retval = 1;
 				*ptep = pte;
+				if (pmdp)
+					*pmdp = pmd;
 				/* XXX caller needs to do pte_unmap, yuck */
                         }
                 }
@@ -420,7 +422,7 @@ unsigned long iopa(unsigned long addr)
 		mm = &init_mm;
 
 	pa = 0;
-	if (get_pteptr(mm, addr, &pte)) {
+	if (get_pteptr(mm, addr, &pte, NULL)) {
 		pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
 		pte_unmap(pte);
 	}
diff --git a/arch/ppc/mm/ppc_mmu.c b/arch/ppc/mm/ppc_mmu.c
index 9a381ed5..25bb6f3 100644
--- a/arch/ppc/mm/ppc_mmu.c
+++ b/arch/ppc/mm/ppc_mmu.c
@@ -2,7 +2,7 @@
  * This file contains the routines for handling the MMU on those
  * PowerPC implementations where the MMU substantially follows the
  * architecture specification.  This includes the 6xx, 7xx, 7xxx,
- * 8260, and POWER3 implementations but excludes the 8xx and 4xx.
+ * 8260, and 83xx implementations but excludes the 8xx and 4xx.
  *  -- paulus
  *
  *  Derived from arch/ppc/mm/init.c:
@@ -42,11 +42,7 @@ unsigned long _SDR1;
 
 union ubat {			/* BAT register values to be loaded */
 	BAT	bat;
-#ifdef CONFIG_PPC64BRIDGE
-	u64	word[2];
-#else
 	u32	word[2];
-#endif
 } BATS[4][2];			/* 4 pairs of IBAT, DBAT */
 
 struct batrange {		/* stores address ranges mapped by BATs */
@@ -83,9 +79,6 @@ unsigned long p_mapped_by_bats(unsigned long pa)
 
 unsigned long __init mmu_mapin_ram(void)
 {
-#ifdef CONFIG_POWER4
-	return 0;
-#else
 	unsigned long tot, bl, done;
 	unsigned long max_size = (256<<20);
 	unsigned long align;
@@ -122,7 +115,6 @@ unsigned long __init mmu_mapin_ram(void)
 	}
 
 	return done;
-#endif
 }
 
 /*
@@ -205,27 +197,10 @@ void __init MMU_init_hw(void)
 
 	if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105);
 
-#ifdef CONFIG_PPC64BRIDGE
-#define LG_HPTEG_SIZE	7		/* 128 bytes per HPTEG */
-#define SDR1_LOW_BITS	(lg_n_hpteg - 11)
-#define MIN_N_HPTEG	2048		/* min 256kB hash table */
-#else
 #define LG_HPTEG_SIZE	6		/* 64 bytes per HPTEG */
 #define SDR1_LOW_BITS	((n_hpteg - 1) >> 10)
 #define MIN_N_HPTEG	1024		/* min 64kB hash table */
-#endif
-
-#ifdef CONFIG_POWER4
-	/* The hash table has already been allocated and initialized
-	   in prom.c */
-	n_hpteg = Hash_size >> LG_HPTEG_SIZE;
-	lg_n_hpteg = __ilog2(n_hpteg);
-
-	/* Remove the hash table from the available memory */
-	if (Hash)
-		reserve_phys_mem(__pa(Hash), Hash_size);
 
-#else /* CONFIG_POWER4 */
 	/*
 	 * Allow 1 HPTE (1/8 HPTEG) for each page of memory.
 	 * This is less than the recommended amount, but then
@@ -248,7 +223,6 @@ void __init MMU_init_hw(void)
 	Hash = mem_pieces_find(Hash_size, Hash_size);
 	cacheable_memzero(Hash, Hash_size);
 	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
-#endif /* CONFIG_POWER4 */
 
 	Hash_end = (PTE *) ((unsigned long)Hash + Hash_size);
 
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
index e8b91a3..90c6222 100644
--- a/arch/ppc/platforms/Makefile
+++ b/arch/ppc/platforms/Makefile
@@ -2,18 +2,10 @@
 # Makefile for the linux kernel.
 #
 
-# Extra CFLAGS so we don't have to do relative includes
-CFLAGS_chrp_setup.o	+= -Iarch/$(ARCH)/mm
-
 obj-$(CONFIG_APUS)		+= apus_setup.o
 ifeq ($(CONFIG_APUS),y)
 obj-$(CONFIG_PCI)		+= apus_pci.o
 endif
-obj-$(CONFIG_PPC_CHRP)		+= chrp_setup.o chrp_time.o chrp_pci.o \
-					chrp_pegasos_eth.o
-ifeq ($(CONFIG_PPC_CHRP),y)
-obj-$(CONFIG_NVRAM)		+= chrp_nvram.o
-endif
 obj-$(CONFIG_PPC_PREP)		+= prep_pci.o prep_setup.o
 obj-$(CONFIG_PREP_RESIDUAL)	+= residual.o
 obj-$(CONFIG_PQ2ADS)		+= pq2ads.o
@@ -40,7 +32,3 @@ obj-$(CONFIG_EV64360)		+= ev64360.o
 obj-$(CONFIG_MPC86XADS)		+= mpc866ads_setup.o
 obj-$(CONFIG_MPC885ADS)		+= mpc885ads_setup.o
 obj-$(CONFIG_ADS8272)		+= mpc8272ads_setup.o
-
-ifeq ($(CONFIG_SMP),y)
-obj-$(CONFIG_PPC_CHRP)		+= chrp_smp.o
-endif
diff --git a/arch/ppc/platforms/chrp_nvram.c b/arch/ppc/platforms/chrp_nvram.c
deleted file mode 100644
index 465ba9b..0000000
--- a/arch/ppc/platforms/chrp_nvram.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  c 2001 PPC 64 Team, IBM Corp
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- *
- * /dev/nvram driver for PPC
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <asm/uaccess.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-
-static unsigned int nvram_size;
-static unsigned char nvram_buf[4];
-static DEFINE_SPINLOCK(nvram_lock);
-
-static unsigned char chrp_nvram_read(int addr)
-{
-	unsigned long done, flags;
-	unsigned char ret;
-
-	if (addr >= nvram_size) {
-		printk(KERN_DEBUG "%s: read addr %d > nvram_size %u\n",
-		       current->comm, addr, nvram_size);
-		return 0xff;
-	}
-	spin_lock_irqsave(&nvram_lock, flags);
-	if ((call_rtas("nvram-fetch", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done)
-		ret = 0xff;
-	else
-		ret = nvram_buf[0];
-	spin_unlock_irqrestore(&nvram_lock, flags);
-
-	return ret;
-}
-
-static void chrp_nvram_write(int addr, unsigned char val)
-{
-	unsigned long done, flags;
-
-	if (addr >= nvram_size) {
-		printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n",
-		       current->comm, addr, nvram_size);
-		return;
-	}
-	spin_lock_irqsave(&nvram_lock, flags);
-	nvram_buf[0] = val;
-	if ((call_rtas("nvram-store", 3, 2, &done, addr, __pa(nvram_buf), 1) != 0) || 1 != done)
-		printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr);
-	spin_unlock_irqrestore(&nvram_lock, flags);
-}
-
-void __init chrp_nvram_init(void)
-{
-	struct device_node *nvram;
-	unsigned int *nbytes_p, proplen;
-
-	nvram = of_find_node_by_type(NULL, "nvram");
-	if (nvram == NULL)
-		return;
-
-	nbytes_p = (unsigned int *)get_property(nvram, "#bytes", &proplen);
-	if (nbytes_p == NULL || proplen != sizeof(unsigned int))
-		return;
-
-	nvram_size = *nbytes_p;
-
-	printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size);
-	of_node_put(nvram);
-
-	ppc_md.nvram_read_val = chrp_nvram_read;
-	ppc_md.nvram_write_val = chrp_nvram_write;
-
-	return;
-}
diff --git a/arch/ppc/platforms/chrp_pci.c b/arch/ppc/platforms/chrp_pci.c
deleted file mode 100644
index c7fe618..0000000
--- a/arch/ppc/platforms/chrp_pci.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * CHRP pci routines.
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/hydra.h>
-#include <asm/prom.h>
-#include <asm/gg2.h>
-#include <asm/machdep.h>
-#include <asm/sections.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-
-/* LongTrail */
-void __iomem *gg2_pci_config_base;
-
-/*
- * The VLSI Golden Gate II has only 512K of PCI configuration space, so we
- * limit the bus number to 3 bits
- */
-
-int gg2_read_config(struct pci_bus *bus, unsigned int devfn, int off,
-			   int len, u32 *val)
-{
-	volatile void __iomem *cfg_data;
-	struct pci_controller *hose = bus->sysdata;
-
-	if (bus->number > 7)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	/*
-	 * Note: the caller has already checked that off is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
-	switch (len) {
-	case 1:
-		*val =  in_8(cfg_data);
-		break;
-	case 2:
-		*val = in_le16(cfg_data);
-		break;
-	default:
-		*val = in_le32(cfg_data);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int gg2_write_config(struct pci_bus *bus, unsigned int devfn, int off,
-			    int len, u32 val)
-{
-	volatile void __iomem *cfg_data;
-	struct pci_controller *hose = bus->sysdata;
-
-	if (bus->number > 7)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	/*
-	 * Note: the caller has already checked that off is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + ((bus->number<<16) | (devfn<<8) | off);
-	switch (len) {
-	case 1:
-		out_8(cfg_data, val);
-		break;
-	case 2:
-		out_le16(cfg_data, val);
-		break;
-	default:
-		out_le32(cfg_data, val);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops gg2_pci_ops =
-{
-	gg2_read_config,
-	gg2_write_config
-};
-
-/*
- * Access functions for PCI config space using RTAS calls.
- */
-int
-rtas_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		 int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
-		| (((bus->number - hose->first_busno) & 0xff) << 16)
-		| (hose->index << 24);
-        unsigned long ret = ~0UL;
-	int rval;
-
-	rval = call_rtas("read-pci-config", 2, 2, &ret, addr, len);
-	*val = ret;
-	return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
-}
-
-int
-rtas_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		  int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	unsigned long addr = (offset & 0xff) | ((devfn & 0xff) << 8)
-		| (((bus->number - hose->first_busno) & 0xff) << 16)
-		| (hose->index << 24);
-	int rval;
-
-	rval = call_rtas("write-pci-config", 3, 1, NULL, addr, len, val);
-	return rval? PCIBIOS_DEVICE_NOT_FOUND: PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops rtas_pci_ops =
-{
-	rtas_read_config,
-	rtas_write_config
-};
-
-volatile struct Hydra __iomem *Hydra = NULL;
-
-int __init
-hydra_init(void)
-{
-	struct device_node *np;
-
-	np = find_devices("mac-io");
-	if (np == NULL || np->n_addrs == 0)
-		return 0;
-	Hydra = ioremap(np->addrs[0].address, np->addrs[0].size);
-	printk("Hydra Mac I/O at %x\n", np->addrs[0].address);
-	printk("Hydra Feature_Control was %x",
-	       in_le32(&Hydra->Feature_Control));
-	out_le32(&Hydra->Feature_Control, (HYDRA_FC_SCC_CELL_EN |
-					   HYDRA_FC_SCSI_CELL_EN |
-					   HYDRA_FC_SCCA_ENABLE |
-					   HYDRA_FC_SCCB_ENABLE |
-					   HYDRA_FC_ARB_BYPASS |
-					   HYDRA_FC_MPIC_ENABLE |
-					   HYDRA_FC_SLOW_SCC_PCLK |
-					   HYDRA_FC_MPIC_IS_MASTER));
-	printk(", now %x\n", in_le32(&Hydra->Feature_Control));
-	return 1;
-}
-
-void __init
-chrp_pcibios_fixup(void)
-{
-	struct pci_dev *dev = NULL;
-	struct device_node *np;
-
-	/* PCI interrupts are controlled by the OpenPIC */
-	for_each_pci_dev(dev) {
-		np = pci_device_to_OF_node(dev);
-		if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0))
-			dev->irq = np->intrs[0].line;
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-}
-
-#define PRG_CL_RESET_VALID 0x00010000
-
-static void __init
-setup_python(struct pci_controller *hose, struct device_node *dev)
-{
-	u32 __iomem *reg;
-	u32 val;
-	unsigned long addr = dev->addrs[0].address;
-
-	setup_indirect_pci(hose, addr + 0xf8000, addr + 0xf8010);
-
-	/* Clear the magic go-slow bit */
-	reg = ioremap(dev->addrs[0].address + 0xf6000, 0x40);
-	val = in_be32(&reg[12]);
-	if (val & PRG_CL_RESET_VALID) {
-		out_be32(&reg[12], val & ~PRG_CL_RESET_VALID);
-		in_be32(&reg[12]);
-	}
-	iounmap(reg);
-}
-
-/* Marvell Discovery II based Pegasos 2 */
-static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev)
-{
-	struct device_node *root = find_path_device("/");
-	struct device_node *rtas;
-
-	rtas = of_find_node_by_name (root, "rtas");
-	if (rtas) {
-		hose->ops = &rtas_pci_ops;
-	} else {
-		printk ("RTAS supporting Pegasos OF not found, please upgrade"
-			" your firmware\n");
-	}
-	pci_assign_all_buses = 1;
-}
-
-void __init
-chrp_find_bridges(void)
-{
-	struct device_node *dev;
-	int *bus_range;
-	int len, index = -1;
-	struct pci_controller *hose;
-	unsigned int *dma;
-	char *model, *machine;
-	int is_longtrail = 0, is_mot = 0, is_pegasos = 0;
-	struct device_node *root = find_path_device("/");
-
-	/*
-	 * The PCI host bridge nodes on some machines don't have
-	 * properties to adequately identify them, so we have to
-	 * look at what sort of machine this is as well.
-	 */
-	machine = get_property(root, "model", NULL);
-	if (machine != NULL) {
-		is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0;
-		is_mot = strncmp(machine, "MOT", 3) == 0;
-		if (strncmp(machine, "Pegasos2", 8) == 0)
-			is_pegasos = 2;
-		else if (strncmp(machine, "Pegasos", 7) == 0)
-			is_pegasos = 1;
-	}
-	for (dev = root->child; dev != NULL; dev = dev->sibling) {
-		if (dev->type == NULL || strcmp(dev->type, "pci") != 0)
-			continue;
-		++index;
-		/* The GG2 bridge on the LongTrail doesn't have an address */
-		if (dev->n_addrs < 1 && !is_longtrail) {
-			printk(KERN_WARNING "Can't use %s: no address\n",
-			       dev->full_name);
-			continue;
-		}
-		bus_range = (int *) get_property(dev, "bus-range", &len);
-		if (bus_range == NULL || len < 2 * sizeof(int)) {
-			printk(KERN_WARNING "Can't get bus-range for %s\n",
-				dev->full_name);
-			continue;
-		}
-		if (bus_range[1] == bus_range[0])
-			printk(KERN_INFO "PCI bus %d", bus_range[0]);
-		else
-			printk(KERN_INFO "PCI buses %d..%d",
-			       bus_range[0], bus_range[1]);
-		printk(" controlled by %s", dev->type);
-		if (dev->n_addrs > 0)
-			printk(" at %x", dev->addrs[0].address);
-		printk("\n");
-
-		hose = pcibios_alloc_controller();
-		if (!hose) {
-			printk("Can't allocate PCI controller structure for %s\n",
-				dev->full_name);
-			continue;
-		}
-		hose->arch_data = dev;
-		hose->first_busno = bus_range[0];
-		hose->last_busno = bus_range[1];
-
-		model = get_property(dev, "model", NULL);
-		if (model == NULL)
-			model = "<none>";
-		if (device_is_compatible(dev, "IBM,python")) {
-			setup_python(hose, dev);
-		} else if (is_mot
-			   || strncmp(model, "Motorola, Grackle", 17) == 0) {
-			setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
-		} else if (is_longtrail) {
-			void __iomem *p = ioremap(GG2_PCI_CONFIG_BASE, 0x80000);
-			hose->ops = &gg2_pci_ops;
-			hose->cfg_data = p;
-			gg2_pci_config_base = p;
-		} else if (is_pegasos == 1) {
-			setup_indirect_pci(hose, 0xfec00cf8, 0xfee00cfc);
-		} else if (is_pegasos == 2) {
-			setup_peg2(hose, dev);
-		} else {
-			printk("No methods for %s (model %s), using RTAS\n",
-			       dev->full_name, model);
-			hose->ops = &rtas_pci_ops;
-		}
-
-		pci_process_bridge_OF_ranges(hose, dev, index == 0);
-
-		/* check the first bridge for a property that we can
-		   use to set pci_dram_offset */
-		dma = (unsigned int *)
-			get_property(dev, "ibm,dma-ranges", &len);
-		if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) {
-			pci_dram_offset = dma[2] - dma[3];
-			printk("pci_dram_offset = %lx\n", pci_dram_offset);
-		}
-	}
-
-	/* Do not fixup interrupts from OF tree on pegasos */
-	if (is_pegasos == 0)
-		ppc_md.pcibios_fixup = chrp_pcibios_fixup;
-}
diff --git a/arch/ppc/platforms/chrp_pegasos_eth.c b/arch/ppc/platforms/chrp_pegasos_eth.c
deleted file mode 100644
index 9305c8a..0000000
--- a/arch/ppc/platforms/chrp_pegasos_eth.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- *  Copyright (C) 2005 Sven Luther <sl@bplan-gmbh.de>
- *  Thanks to :
- *	Dale Farnsworth <dale@farnsworth.org>
- *	Mark A. Greer <mgreer@mvista.com>
- *	Nicolas DET <nd@bplan-gmbh.de>
- *	Benjamin Herrenschmidt <benh@kernel.crashing.org>
- *  And anyone else who helped me on this.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx.h>
-#include <linux/pci.h>
-
-#define PEGASOS2_MARVELL_REGBASE 		(0xf1000000)
-#define PEGASOS2_MARVELL_REGSIZE 		(0x00004000)
-#define PEGASOS2_SRAM_BASE 			(0xf2000000)
-#define PEGASOS2_SRAM_SIZE			(256*1024)
-
-#define PEGASOS2_SRAM_BASE_ETH0			(PEGASOS2_SRAM_BASE)
-#define PEGASOS2_SRAM_BASE_ETH1			(PEGASOS2_SRAM_BASE_ETH0 + (PEGASOS2_SRAM_SIZE / 2) )
-
-
-#define PEGASOS2_SRAM_RXRING_SIZE		(PEGASOS2_SRAM_SIZE/4)
-#define PEGASOS2_SRAM_TXRING_SIZE		(PEGASOS2_SRAM_SIZE/4)
-
-#undef BE_VERBOSE
-
-static struct resource mv643xx_eth_shared_resources[] = {
-	[0] = {
-		.name	= "ethernet shared base",
-		.start	= 0xf1000000 + MV643XX_ETH_SHARED_REGS,
-		.end	= 0xf1000000 + MV643XX_ETH_SHARED_REGS +
-					MV643XX_ETH_SHARED_REGS_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mv643xx_eth_shared_device = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv643xx_eth_shared_resources),
-	.resource	= mv643xx_eth_shared_resources,
-};
-
-static struct resource mv643xx_eth0_resources[] = {
-	[0] = {
-		.name	= "eth0 irq",
-		.start	= 9,
-		.end	= 9,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-
-static struct mv643xx_eth_platform_data eth0_pd = {
-	.tx_sram_addr = PEGASOS2_SRAM_BASE_ETH0,
-	.tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
-	.tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
-
-	.rx_sram_addr = PEGASOS2_SRAM_BASE_ETH0 + PEGASOS2_SRAM_TXRING_SIZE,
-	.rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE,
-	.rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16,
-};
-
-static struct platform_device eth0_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv643xx_eth0_resources),
-	.resource	= mv643xx_eth0_resources,
-	.dev = {
-		.platform_data = &eth0_pd,
-	},
-};
-
-static struct resource mv643xx_eth1_resources[] = {
-	[0] = {
-		.name	= "eth1 irq",
-		.start	= 9,
-		.end	= 9,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth1_pd = {
-	.tx_sram_addr = PEGASOS2_SRAM_BASE_ETH1,
-	.tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE,
-	.tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16,
-
-	.rx_sram_addr = PEGASOS2_SRAM_BASE_ETH1 + PEGASOS2_SRAM_TXRING_SIZE,
-	.rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE,
-	.rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16,
-};
-
-static struct platform_device eth1_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(mv643xx_eth1_resources),
-	.resource	= mv643xx_eth1_resources,
-	.dev = {
-		.platform_data = &eth1_pd,
-	},
-};
-
-static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
-	&mv643xx_eth_shared_device,
-	&eth0_device,
-	&eth1_device,
-};
-
-/***********/
-/***********/
-#define MV_READ(offset,val) 	{ val = readl(mv643xx_reg_base + offset); }
-#define MV_WRITE(offset,data) writel(data, mv643xx_reg_base + offset)
-
-static void __iomem *mv643xx_reg_base;
-
-static int Enable_SRAM(void)
-{
-	u32 ALong;
-
-	if (mv643xx_reg_base == NULL)
-		mv643xx_reg_base = ioremap(PEGASOS2_MARVELL_REGBASE,
-					PEGASOS2_MARVELL_REGSIZE);
-
-	if (mv643xx_reg_base == NULL)
-		return -ENOMEM;
-
-#ifdef BE_VERBOSE
-	printk("Pegasos II/Marvell MV64361: register remapped from %p to %p\n",
-		(void *)PEGASOS2_MARVELL_REGBASE, (void *)mv643xx_reg_base);
-#endif
-
-	MV_WRITE(MV64340_SRAM_CONFIG, 0);
-
-	MV_WRITE(MV64340_INTEGRATED_SRAM_BASE_ADDR, PEGASOS2_SRAM_BASE >> 16);
-
-	MV_READ(MV64340_BASE_ADDR_ENABLE, ALong);
-	ALong &= ~(1 << 19);
-	MV_WRITE(MV64340_BASE_ADDR_ENABLE, ALong);
-
-	ALong = 0x02;
-	ALong |= PEGASOS2_SRAM_BASE & 0xffff0000;
-	MV_WRITE(MV643XX_ETH_BAR_4, ALong);
-
-	MV_WRITE(MV643XX_ETH_SIZE_REG_4, (PEGASOS2_SRAM_SIZE-1) & 0xffff0000);
-
-	MV_READ(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong);
-	ALong &= ~(1 << 4);
-	MV_WRITE(MV643XX_ETH_BASE_ADDR_ENABLE_REG, ALong);
-
-#ifdef BE_VERBOSE
-	printk("Pegasos II/Marvell MV64361: register unmapped\n");
-	printk("Pegasos II/Marvell MV64361: SRAM at %p, size=%x\n", (void*) PEGASOS2_SRAM_BASE, PEGASOS2_SRAM_SIZE);
-#endif
-
-	iounmap(mv643xx_reg_base);
-	mv643xx_reg_base = NULL;
-
-	return 1;
-}
-
-
-/***********/
-/***********/
-int mv643xx_eth_add_pds(void)
-{
-	int ret = 0;
-	static struct pci_device_id pci_marvell_mv64360[] = {
-		{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360) },
-		{ }
-	};
-
-#ifdef BE_VERBOSE
-	printk("Pegasos II/Marvell MV64361: init\n");
-#endif
-
-	if (pci_dev_present(pci_marvell_mv64360)) {
-		ret = platform_add_devices(mv643xx_eth_pd_devs,
-				ARRAY_SIZE(mv643xx_eth_pd_devs));
-
-		if ( Enable_SRAM() < 0)
-		{
-			eth0_pd.tx_sram_addr = 0;
-			eth0_pd.tx_sram_size = 0;
-			eth0_pd.rx_sram_addr = 0;
-			eth0_pd.rx_sram_size = 0;
-
-			eth1_pd.tx_sram_addr = 0;
-			eth1_pd.tx_sram_size = 0;
-			eth1_pd.rx_sram_addr = 0;
-			eth1_pd.rx_sram_size = 0;
-
-#ifdef BE_VERBOSE
-			printk("Pegasos II/Marvell MV64361: Can't enable the "
-				"SRAM\n");
-#endif
-		}
-	}
-
-#ifdef BE_VERBOSE
-	printk("Pegasos II/Marvell MV64361: init is over\n");
-#endif
-
-	return ret;
-}
-
-device_initcall(mv643xx_eth_add_pds);
diff --git a/arch/ppc/platforms/chrp_setup.c b/arch/ppc/platforms/chrp_setup.c
deleted file mode 100644
index f9fd3f4..0000000
--- a/arch/ppc/platforms/chrp_setup.c
+++ /dev/null
@@ -1,669 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- */
-
-/*
- * bootup setup stuff..
- */
-
-#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/version.h>
-#include <linux/adb.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/module.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/prom.h>
-#include <asm/gg2.h>
-#include <asm/pci-bridge.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/irq.h>
-#include <asm/hydra.h>
-#include <asm/sections.h>
-#include <asm/time.h>
-#include <asm/btext.h>
-#include <asm/i8259.h>
-#include <asm/open_pic.h>
-#include <asm/xmon.h>
-#include "mem_pieces.h"
-
-unsigned long chrp_get_rtc_time(void);
-int chrp_set_rtc_time(unsigned long nowtime);
-void chrp_calibrate_decr(void);
-long chrp_time_init(void);
-
-void chrp_find_bridges(void);
-void chrp_event_scan(void);
-void rtas_display_progress(char *, unsigned short);
-void rtas_indicator_progress(char *, unsigned short);
-void btext_progress(char *, unsigned short);
-
-extern int of_show_percpuinfo(struct seq_file *, int);
-
-int _chrp_type;
-EXPORT_SYMBOL(_chrp_type);
-
-/*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems.  -- paulus
- */
-extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
-
-extern dev_t boot_dev;
-
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-extern int probingmem;
-extern unsigned long loops_per_jiffy;
-static int max_width;
-
-#ifdef CONFIG_SMP
-extern struct smp_ops_t chrp_smp_ops;
-#endif
-
-static const char *gg2_memtypes[4] = {
-	"FPM", "SDRAM", "EDO", "BEDO"
-};
-static const char *gg2_cachesizes[4] = {
-	"256 KB", "512 KB", "1 MB", "Reserved"
-};
-static const char *gg2_cachetypes[4] = {
-	"Asynchronous", "Reserved", "Flow-Through Synchronous",
-	"Pipelined Synchronous"
-};
-static const char *gg2_cachemodes[4] = {
-	"Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
-};
-
-int
-chrp_show_cpuinfo(struct seq_file *m)
-{
-	int i, sdramen;
-	unsigned int t;
-	struct device_node *root;
-	const char *model = "";
-
-	root = find_path_device("/");
-	if (root)
-		model = get_property(root, "model", NULL);
-	seq_printf(m, "machine\t\t: CHRP %s\n", model);
-
-	/* longtrail (goldengate) stuff */
-	if (!strncmp(model, "IBM,LongTrail", 13)) {
-		/* VLSI VAS96011/12 `Golden Gate 2' */
-		/* Memory banks */
-		sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
-			   >>31) & 1;
-		for (i = 0; i < (sdramen ? 4 : 6); i++) {
-			t = in_le32(gg2_pci_config_base+
-						 GG2_PCI_DRAM_BANK0+
-						 i*4);
-			if (!(t & 1))
-				continue;
-			switch ((t>>8) & 0x1f) {
-			case 0x1f:
-				model = "4 MB";
-				break;
-			case 0x1e:
-				model = "8 MB";
-				break;
-			case 0x1c:
-				model = "16 MB";
-				break;
-			case 0x18:
-				model = "32 MB";
-				break;
-			case 0x10:
-				model = "64 MB";
-				break;
-			case 0x00:
-				model = "128 MB";
-				break;
-			default:
-				model = "Reserved";
-				break;
-			}
-			seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
-				   gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
-		}
-		/* L2 cache */
-		t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL);
-		seq_printf(m, "board l2\t: %s %s (%s)\n",
-			   gg2_cachesizes[(t>>7) & 3],
-			   gg2_cachetypes[(t>>2) & 3],
-			   gg2_cachemodes[t & 3]);
-	}
-	return 0;
-}
-
-/*
- *  Fixes for the National Semiconductor PC78308VUL SuperI/O
- *
- *  Some versions of Open Firmware incorrectly initialize the IRQ settings
- *  for keyboard and mouse
- */
-static inline void __init sio_write(u8 val, u8 index)
-{
-	outb(index, 0x15c);
-	outb(val, 0x15d);
-}
-
-static inline u8 __init sio_read(u8 index)
-{
-	outb(index, 0x15c);
-	return inb(0x15d);
-}
-
-static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
-				     u8 type)
-{
-	u8 level0, type0, active;
-
-	/* select logical device */
-	sio_write(device, 0x07);
-	active = sio_read(0x30);
-	level0 = sio_read(0x70);
-	type0 = sio_read(0x71);
-	if (level0 != level || type0 != type || !active) {
-		printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
-		       "remapping to level %d, type %d, active\n",
-		       name, level0, type0, !active ? "in" : "", level, type);
-		sio_write(0x01, 0x30);
-		sio_write(level, 0x70);
-		sio_write(type, 0x71);
-	}
-}
-
-static void __init sio_init(void)
-{
-	struct device_node *root;
-
-	if ((root = find_path_device("/")) &&
-	    !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) {
-		/* logical device 0 (KBC/Keyboard) */
-		sio_fixup_irq("keyboard", 0, 1, 2);
-		/* select logical device 1 (KBC/Mouse) */
-		sio_fixup_irq("mouse", 1, 12, 2);
-	}
-}
-
-
-static void __init pegasos_set_l2cr(void)
-{
-	struct device_node *np;
-
-	/* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
-	if (_chrp_type != _CHRP_Pegasos)
-		return;
-
-	/* Enable L2 cache if needed */
-	np = find_type_devices("cpu");
-	if (np != NULL) {
-		unsigned int *l2cr = (unsigned int *)
-			get_property (np, "l2cr", NULL);
-		if (l2cr == NULL) {
-			printk ("Pegasos l2cr : no cpu l2cr property found\n");
-			return;
-		}
-		if (!((*l2cr) & 0x80000000)) {
-			printk ("Pegasos l2cr : L2 cache was not active, "
-				"activating\n");
-			_set_L2CR(0);
-			_set_L2CR((*l2cr) | 0x80000000);
-		}
-	}
-}
-
-void __init chrp_setup_arch(void)
-{
-	struct device_node *device;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000/HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* this is fine for chrp */
-	initrd_below_start_ok = 1;
-
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-		ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */
-
-	/* On pegasos, enable the L2 cache if not already done by OF */
-	pegasos_set_l2cr();
-
-	/* Lookup PCI host bridges */
-	chrp_find_bridges();
-
-#ifndef CONFIG_PPC64BRIDGE
-	/*
-	 *  Temporary fixes for PCI devices.
-	 *  -- Geert
-	 */
-	hydra_init();		/* Mac I/O */
-
-#endif /* CONFIG_PPC64BRIDGE */
-
-	/*
-	 *  Fix the Super I/O configuration
-	 */
-	sio_init();
-
-	/* Get the event scan rate for the rtas so we know how
-	 * often it expects a heartbeat. -- Cort
-	 */
-	if ( rtas_data ) {
-		struct property *p;
-		device = find_devices("rtas");
-		for ( p = device->properties;
-		      p && strncmp(p->name, "rtas-event-scan-rate", 20);
-		      p = p->next )
-			/* nothing */ ;
-		if ( p && *(unsigned long *)p->value ) {
-			ppc_md.heartbeat = chrp_event_scan;
-			ppc_md.heartbeat_reset = (HZ/(*(unsigned long *)p->value)*30)-1;
-			ppc_md.heartbeat_count = 1;
-			printk("RTAS Event Scan Rate: %lu (%lu jiffies)\n",
-			       *(unsigned long *)p->value, ppc_md.heartbeat_reset );
-		}
-	}
-
-	pci_create_OF_bus_map();
-}
-
-void
-chrp_event_scan(void)
-{
-	unsigned char log[1024];
-	unsigned long ret = 0;
-	/* XXX: we should loop until the hardware says no more error logs -- Cort */
-	call_rtas( "event-scan", 4, 1, &ret, 0xffffffff, 0,
-		   __pa(log), 1024 );
-	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-}
-
-void
-chrp_restart(char *cmd)
-{
-	printk("RTAS system-reboot returned %d\n",
-	       call_rtas("system-reboot", 0, 1, NULL));
-	for (;;);
-}
-
-void
-chrp_power_off(void)
-{
-	/* allow power on only with power button press */
-	printk("RTAS power-off returned %d\n",
-	       call_rtas("power-off", 2, 1, NULL,0xffffffff,0xffffffff));
-	for (;;);
-}
-
-void
-chrp_halt(void)
-{
-	chrp_power_off();
-}
-
-/*
- * Finds the open-pic node and sets OpenPIC_Addr based on its reg property.
- * Then checks if it has an interrupt-ranges property.  If it does then
- * we have a distributed open-pic, so call openpic_set_sources to tell
- * the openpic code where to find the interrupt source registers.
- */
-static void __init chrp_find_openpic(void)
-{
-	struct device_node *np;
-	int len, i;
-	unsigned int *iranges;
-	void __iomem *isu;
-
-	np = find_type_devices("open-pic");
-	if (np == NULL || np->n_addrs == 0)
-		return;
-	printk(KERN_INFO "OpenPIC at %x (size %x)\n",
-	       np->addrs[0].address, np->addrs[0].size);
-	OpenPIC_Addr = ioremap(np->addrs[0].address, 0x40000);
-	if (OpenPIC_Addr == NULL) {
-		printk(KERN_ERR "Failed to map OpenPIC!\n");
-		return;
-	}
-
-	iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
-	if (iranges == NULL || len < 2 * sizeof(unsigned int))
-		return;		/* not distributed */
-
-	/*
-	 * The first pair of cells in interrupt-ranges refers to the
-	 * IDU; subsequent pairs refer to the ISUs.
-	 */
-	len /= 2 * sizeof(unsigned int);
-	if (np->n_addrs < len) {
-		printk(KERN_ERR "Insufficient addresses for distributed"
-		       " OpenPIC (%d < %d)\n", np->n_addrs, len);
-		return;
-	}
-	if (iranges[1] != 0) {
-		printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
-		       iranges[0], iranges[0] + iranges[1] - 1);
-		openpic_set_sources(iranges[0], iranges[1], NULL);
-	}
-	for (i = 1; i < len; ++i) {
-		iranges += 2;
-		printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x (%x)\n",
-		       iranges[0], iranges[0] + iranges[1] - 1,
-		       np->addrs[i].address, np->addrs[i].size);
-		isu = ioremap(np->addrs[i].address, np->addrs[i].size);
-		if (isu != NULL)
-			openpic_set_sources(iranges[0], iranges[1], isu);
-		else
-			printk(KERN_ERR "Failed to map OpenPIC ISU at %x!\n",
-			       np->addrs[i].address);
-	}
-}
-
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
-static struct irqaction xmon_irqaction = {
-	.handler = xmon_irq,
-	.mask = CPU_MASK_NONE,
-	.name = "XMON break",
-};
-#endif
-
-void __init chrp_init_IRQ(void)
-{
-	struct device_node *np;
-	unsigned long chrp_int_ack = 0;
-	unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
-	struct device_node *kbd;
-#endif
-
-	for (np = find_devices("pci"); np != NULL; np = np->next) {
-		unsigned int *addrp = (unsigned int *)
-			get_property(np, "8259-interrupt-acknowledge", NULL);
-
-		if (addrp == NULL)
-			continue;
-		chrp_int_ack = addrp[prom_n_addr_cells(np)-1];
-		break;
-	}
-	if (np == NULL)
-		printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
-
-	chrp_find_openpic();
-
-	if (OpenPIC_Addr) {
-		prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS);
-		OpenPIC_InitSenses = init_senses;
-		OpenPIC_NumInitSenses = NR_IRQS - NUM_8259_INTERRUPTS;
-
-		openpic_init(NUM_8259_INTERRUPTS);
-		/* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
-		openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-				       i8259_irq);
-
-	}
-	i8259_init(chrp_int_ack, 0);
-
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
-	/* see if there is a keyboard in the device tree
-	   with a parent of type "adb" */
-	for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next)
-		if (kbd->parent && kbd->parent->type
-		    && strcmp(kbd->parent->type, "adb") == 0)
-			break;
-	if (kbd)
-		setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
-#endif
-}
-
-void __init
-chrp_init2(void)
-{
-#ifdef CONFIG_NVRAM
-	chrp_nvram_init();
-#endif
-
-	request_region(0x20,0x20,"pic1");
-	request_region(0xa0,0x20,"pic2");
-	request_region(0x00,0x20,"dma1");
-	request_region(0x40,0x20,"timer");
-	request_region(0x80,0x10,"dma page reg");
-	request_region(0xc0,0x20,"dma2");
-
-	if (ppc_md.progress)
-		ppc_md.progress("  Have fun!    ", 0x7777);
-}
-
-static struct device_node *memory_node;
-
-static int __init get_mem_prop(char *name, struct mem_pieces *mp)
-{
-	struct reg_property *rp;
-	int i, s;
-	unsigned int *ip;
-	int nac = prom_n_addr_cells(memory_node);
-	int nsc = prom_n_size_cells(memory_node);
-
-	ip = (unsigned int *) get_property(memory_node, name, &s);
-	if (ip == NULL) {
-		printk(KERN_ERR "error: couldn't get %s property on /memory\n",
-		       name);
-		return 0;
-	}
-	s /= (nsc + nac) * 4;
-	rp = mp->regions;
-	for (i = 0; i < s; ++i, ip += nac+nsc) {
-		if (nac >= 2 && ip[nac-2] != 0)
-			continue;
-		rp->address = ip[nac-1];
-		if (nsc >= 2 && ip[nac+nsc-2] != 0)
-			rp->size = ~0U;
-		else
-			rp->size = ip[nac+nsc-1];
-		++rp;
-	}
-	mp->n_regions = rp - mp->regions;
-
-	/* Make sure the pieces are sorted. */
-	mem_pieces_sort(mp);
-	mem_pieces_coalesce(mp);
-	return 1;
-}
-
-static unsigned long __init chrp_find_end_of_memory(void)
-{
-	unsigned long a, total;
-	struct mem_pieces phys_mem;
-
-	/*
-	 * Find out where physical memory is, and check that it
-	 * starts at 0 and is contiguous.  It seems that RAM is
-	 * always physically contiguous on Power Macintoshes.
-	 *
-	 * Supporting discontiguous physical memory isn't hard,
-	 * it just makes the virtual <-> physical mapping functions
-	 * more complicated (or else you end up wasting space
-	 * in mem_map).
-	 */
-	memory_node = find_devices("memory");
-	if (memory_node == NULL || !get_mem_prop("reg", &phys_mem)
-	    || phys_mem.n_regions == 0)
-		panic("No RAM??");
-	a = phys_mem.regions[0].address;
-	if (a != 0)
-		panic("RAM doesn't start at physical address 0");
-	total = phys_mem.regions[0].size;
-
-	if (phys_mem.n_regions > 1) {
-		printk("RAM starting at 0x%x is not contiguous\n",
-		       phys_mem.regions[1].address);
-		printk("Using RAM from 0 to 0x%lx\n", total-1);
-	}
-
-	return total;
-}
-
-void __init
-chrp_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	  unsigned long r6, unsigned long r7)
-{
-	struct device_node *root = find_path_device ("/");
-	char *machine = NULL;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if ( r6 )
-	{
-		initrd_start = r6 + KERNELBASE;
-		initrd_end = r6 + r7 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	ISA_DMA_THRESHOLD = ~0L;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	isa_io_base = CHRP_ISA_IO_BASE;		/* default value */
-	ppc_do_canonicalize_irqs = 1;
-
-	if (root)
-		machine = get_property(root, "model", NULL);
-	if (machine && strncmp(machine, "Pegasos", 7) == 0) {
-		_chrp_type = _CHRP_Pegasos;
-	} else if (machine && strncmp(machine, "IBM", 3) == 0) {
-		_chrp_type = _CHRP_IBM;
-	} else if (machine && strncmp(machine, "MOT", 3) == 0) {
-		_chrp_type = _CHRP_Motorola;
-	} else {
-		/* Let's assume it is an IBM chrp if all else fails */
-		_chrp_type = _CHRP_IBM;
-	}
-
-	ppc_md.setup_arch     = chrp_setup_arch;
-	ppc_md.show_percpuinfo = of_show_percpuinfo;
-	ppc_md.show_cpuinfo   = chrp_show_cpuinfo;
-
-	ppc_md.init_IRQ       = chrp_init_IRQ;
-	if (_chrp_type == _CHRP_Pegasos)
-		ppc_md.get_irq        = i8259_irq;
-	else
-		ppc_md.get_irq        = openpic_get_irq;
-
-	ppc_md.init           = chrp_init2;
-
-	ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
-
-	ppc_md.restart        = chrp_restart;
-	ppc_md.power_off      = chrp_power_off;
-	ppc_md.halt           = chrp_halt;
-
-	ppc_md.time_init      = chrp_time_init;
-	ppc_md.set_rtc_time   = chrp_set_rtc_time;
-	ppc_md.get_rtc_time   = chrp_get_rtc_time;
-	ppc_md.calibrate_decr = chrp_calibrate_decr;
-
-	ppc_md.find_end_of_memory = chrp_find_end_of_memory;
-
-	if (rtas_data) {
-		struct device_node *rtas;
-		unsigned int *p;
-
-		rtas = find_devices("rtas");
-		if (rtas != NULL) {
-			if (get_property(rtas, "display-character", NULL)) {
-				ppc_md.progress = rtas_display_progress;
-				p = (unsigned int *) get_property
-				       (rtas, "ibm,display-line-length", NULL);
-				if (p)
-					max_width = *p;
-			} else if (get_property(rtas, "set-indicator", NULL))
-				ppc_md.progress = rtas_indicator_progress;
-		}
-	}
-#ifdef CONFIG_BOOTX_TEXT
-	if (ppc_md.progress == NULL && boot_text_mapped)
-		ppc_md.progress = btext_progress;
-#endif
-
-#ifdef CONFIG_SMP
-	smp_ops = &chrp_smp_ops;
-#endif /* CONFIG_SMP */
-
-	/*
-	 * Print the banner, then scroll down so boot progress
-	 * can be printed.  -- Cort
-	 */
-	if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
-}
-
-void
-rtas_display_progress(char *s, unsigned short hex)
-{
-	int width;
-	char *os = s;
-
-	if ( call_rtas( "display-character", 1, 1, NULL, '\r' ) )
-		return;
-
-	width = max_width;
-	while ( *os )
-	{
-		if ( (*os == '\n') || (*os == '\r') )
-			width = max_width;
-		else
-			width--;
-		call_rtas( "display-character", 1, 1, NULL, *os++ );
-		/* if we overwrite the screen length */
-		if ( width == 0 )
-			while ( (*os != 0) && (*os != '\n') && (*os != '\r') )
-				os++;
-	}
-
-	/*while ( width-- > 0 )*/
-	call_rtas( "display-character", 1, 1, NULL, ' ' );
-}
-
-void
-rtas_indicator_progress(char *s, unsigned short hex)
-{
-	call_rtas("set-indicator", 3, 1, NULL, 6, 0, hex);
-}
-
-#ifdef CONFIG_BOOTX_TEXT
-void
-btext_progress(char *s, unsigned short hex)
-{
-	prom_print(s);
-	prom_print("\n");
-}
-#endif /* CONFIG_BOOTX_TEXT */
diff --git a/arch/ppc/platforms/chrp_smp.c b/arch/ppc/platforms/chrp_smp.c
deleted file mode 100644
index 97e5395..0000000
--- a/arch/ppc/platforms/chrp_smp.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Smp support for CHRP machines.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great
- * deal of code from the sparc and intel versions.
- *
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- *
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/residual.h>
-#include <asm/time.h>
-#include <asm/open_pic.h>
-#include <asm/machdep.h>
-
-extern unsigned long smp_chrp_cpu_nr;
-
-static int __init
-smp_chrp_probe(void)
-{
-	if (smp_chrp_cpu_nr > 1)
-		openpic_request_IPIs();
-
-	return smp_chrp_cpu_nr;
-}
-
-static void __devinit
-smp_chrp_kick_cpu(int nr)
-{
-	*(unsigned long *)KERNELBASE = nr;
-	asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
-}
-
-static void __devinit
-smp_chrp_setup_cpu(int cpu_nr)
-{
-	if (OpenPIC_Addr)
-		do_openpic_setup_cpu();
-}
-
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-
-void __devinit
-smp_chrp_give_timebase(void)
-{
-	spin_lock(&timebase_lock);
-	call_rtas("freeze-time-base", 0, 1, NULL);
-	timebase_upper = get_tbu();
-	timebase_lower = get_tbl();
-	spin_unlock(&timebase_lock);
-
-	while (timebase_upper || timebase_lower)
-		barrier();
-	call_rtas("thaw-time-base", 0, 1, NULL);
-}
-
-void __devinit
-smp_chrp_take_timebase(void)
-{
-	while (!(timebase_upper || timebase_lower))
-		barrier();
-	spin_lock(&timebase_lock);
-	set_tb(timebase_upper, timebase_lower);
-	timebase_upper = 0;
-	timebase_lower = 0;
-	spin_unlock(&timebase_lock);
-	printk("CPU %i taken timebase\n", smp_processor_id());
-}
-
-/* CHRP with openpic */
-struct smp_ops_t chrp_smp_ops = {
-	.message_pass = smp_openpic_message_pass,
-	.probe = smp_chrp_probe,
-	.kick_cpu = smp_chrp_kick_cpu,
-	.setup_cpu = smp_chrp_setup_cpu,
-	.give_timebase = smp_chrp_give_timebase,
-	.take_timebase = smp_chrp_take_timebase,
-};
diff --git a/arch/ppc/platforms/chrp_time.c b/arch/ppc/platforms/chrp_time.c
deleted file mode 100644
index c862777..0000000
--- a/arch/ppc/platforms/chrp_time.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
- *
- * Adapted for PowerPC (PReP) by Gary Thomas
- * Modified by Cort Dougan (cort@cs.nmt.edu).
- * Copied and modified from arch/i386/kernel/time.c
- *
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/init.h>
-#include <linux/bcd.h>
-
-#include <asm/io.h>
-#include <asm/nvram.h>
-#include <asm/prom.h>
-#include <asm/sections.h>
-#include <asm/time.h>
-
-extern spinlock_t rtc_lock;
-
-static int nvram_as1 = NVRAM_AS1;
-static int nvram_as0 = NVRAM_AS0;
-static int nvram_data = NVRAM_DATA;
-
-long __init chrp_time_init(void)
-{
-	struct device_node *rtcs;
-	int base;
-
-	rtcs = find_compatible_devices("rtc", "pnpPNP,b00");
-	if (rtcs == NULL)
-		rtcs = find_compatible_devices("rtc", "ds1385-rtc");
-	if (rtcs == NULL || rtcs->addrs == NULL)
-		return 0;
-	base = rtcs->addrs[0].address;
-	nvram_as1 = 0;
-	nvram_as0 = base;
-	nvram_data = base + 1;
-
-	return 0;
-}
-
-int chrp_cmos_clock_read(int addr)
-{
-	if (nvram_as1 != 0)
-		outb(addr>>8, nvram_as1);
-	outb(addr, nvram_as0);
-	return (inb(nvram_data));
-}
-
-void chrp_cmos_clock_write(unsigned long val, int addr)
-{
-	if (nvram_as1 != 0)
-		outb(addr>>8, nvram_as1);
-	outb(addr, nvram_as0);
-	outb(val, nvram_data);
-	return;
-}
-
-/*
- * Set the hardware clock. -- Cort
- */
-int chrp_set_rtc_time(unsigned long nowtime)
-{
-	unsigned char save_control, save_freq_select;
-	struct rtc_time tm;
-
-	spin_lock(&rtc_lock);
-	to_tm(nowtime, &tm);
-
-	save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */
-
-	chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL);
-
-	save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */
-
-	chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-        tm.tm_year -= 1900;
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BIN_TO_BCD(tm.tm_sec);
-		BIN_TO_BCD(tm.tm_min);
-		BIN_TO_BCD(tm.tm_hour);
-		BIN_TO_BCD(tm.tm_mon);
-		BIN_TO_BCD(tm.tm_mday);
-		BIN_TO_BCD(tm.tm_year);
-	}
-	chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS);
-	chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES);
-	chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS);
-	chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH);
-	chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH);
-	chrp_cmos_clock_write(tm.tm_year,RTC_YEAR);
-
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
-	 */
-	chrp_cmos_clock_write(save_control, RTC_CONTROL);
-	chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT);
-
-	spin_unlock(&rtc_lock);
-	return 0;
-}
-
-unsigned long chrp_get_rtc_time(void)
-{
-	unsigned int year, mon, day, hour, min, sec;
-	int uip, i;
-
-	/* The Linux interpretation of the CMOS clock register contents:
-	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
-	 * RTC registers show the second which has precisely just started.
-	 * Let's hope other operating systems interpret the RTC the same way.
-	 */
-
-	/* Since the UIP flag is set for about 2.2 ms and the clock
-	 * is typically written with a precision of 1 jiffy, trying
-	 * to obtain a precision better than a few milliseconds is
-	 * an illusion. Only consistency is interesting, this also
-	 * allows to use the routine for /dev/rtc without a potential
-	 * 1 second kernel busy loop triggered by any reader of /dev/rtc.
-	 */
-
-	for ( i = 0; i<1000000; i++) {
-		uip = chrp_cmos_clock_read(RTC_FREQ_SELECT);
-		sec = chrp_cmos_clock_read(RTC_SECONDS);
-		min = chrp_cmos_clock_read(RTC_MINUTES);
-		hour = chrp_cmos_clock_read(RTC_HOURS);
-		day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH);
-		mon = chrp_cmos_clock_read(RTC_MONTH);
-		year = chrp_cmos_clock_read(RTC_YEAR);
-		uip |= chrp_cmos_clock_read(RTC_FREQ_SELECT);
-		if ((uip & RTC_UIP)==0) break;
-	}
-
-	if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-	  {
-	    BCD_TO_BIN(sec);
-	    BCD_TO_BIN(min);
-	    BCD_TO_BIN(hour);
-	    BCD_TO_BIN(day);
-	    BCD_TO_BIN(mon);
-	    BCD_TO_BIN(year);
-	  }
-	if ((year += 1900) < 1970)
-		year += 100;
-	return mktime(year, mon, day, hour, min, sec);
-}
-
-/*
- * Calibrate the decrementer frequency with the VIA timer 1.
- */
-#define VIA_TIMER_FREQ_6	4700000	/* time 1 frequency * 6 */
-
-/* VIA registers */
-#define RS		0x200		/* skip between registers */
-#define T1CL		(4*RS)		/* Timer 1 ctr/latch (low 8 bits) */
-#define T1CH		(5*RS)		/* Timer 1 counter (high 8 bits) */
-#define T1LL		(6*RS)		/* Timer 1 latch (low 8 bits) */
-#define T1LH		(7*RS)		/* Timer 1 latch (high 8 bits) */
-#define ACR		(11*RS)		/* Auxiliary control register */
-#define IFR		(13*RS)		/* Interrupt flag register */
-
-/* Bits in ACR */
-#define T1MODE		0xc0		/* Timer 1 mode */
-#define T1MODE_CONT	0x40		/*  continuous interrupts */
-
-/* Bits in IFR and IER */
-#define T1_INT		0x40		/* Timer 1 interrupt */
-
-static int __init chrp_via_calibrate_decr(void)
-{
-	struct device_node *vias;
-	volatile unsigned char __iomem *via;
-	int count = VIA_TIMER_FREQ_6 / 100;
-	unsigned int dstart, dend;
-
-	vias = find_devices("via-cuda");
-	if (vias == 0)
-		vias = find_devices("via");
-	if (vias == 0 || vias->n_addrs == 0)
-		return 0;
-	via = ioremap(vias->addrs[0].address, vias->addrs[0].size);
-
-	/* set timer 1 for continuous interrupts */
-	out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
-	/* set the counter to a small value */
-	out_8(&via[T1CH], 2);
-	/* set the latch to `count' */
-	out_8(&via[T1LL], count);
-	out_8(&via[T1LH], count >> 8);
-	/* wait until it hits 0 */
-	while ((in_8(&via[IFR]) & T1_INT) == 0)
-		;
-	dstart = get_dec();
-	/* clear the interrupt & wait until it hits 0 again */
-	in_8(&via[T1CL]);
-	while ((in_8(&via[IFR]) & T1_INT) == 0)
-		;
-	dend = get_dec();
-
-	tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100);
-	tb_to_us = mulhwu_scale_factor(dstart - dend, 60000);
-
-	printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n",
-	       tb_ticks_per_jiffy, dstart - dend);
-
-	iounmap(via);
-	
-	return 1;
-}
-
-void __init chrp_calibrate_decr(void)
-{
-	struct device_node *cpu;
-	unsigned int freq, *fp;
-
-	if (chrp_via_calibrate_decr())
-		return;
-
-	/*
-	 * The cpu node should have a timebase-frequency property
-	 * to tell us the rate at which the decrementer counts.
-	 */
-	freq = 16666000;		/* hardcoded default */
-	cpu = find_type_devices("cpu");
-	if (cpu != 0) {
-		fp = (unsigned int *)
-			get_property(cpu, "timebase-frequency", NULL);
-		if (fp != 0)
-			freq = *fp;
-	}
-	printk("time_init: decrementer frequency = %u.%.6u MHz\n",
- 	       freq/1000000, freq%1000000);
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c
index 5171b53..fecbe9a 100644
--- a/arch/ppc/platforms/lite5200.c
+++ b/arch/ppc/platforms/lite5200.c
@@ -34,8 +34,7 @@
 #include <asm/mpc52xx.h>
 #include <asm/ppc_sys.h>
 #include <asm/machdep.h>
-
-#include <syslib/mpc52xx_pci.h>
+#include <asm/pci-bridge.h>
 
 
 extern int powersave_nap;
@@ -68,44 +67,53 @@ lite5200_show_cpuinfo(struct seq_file *m)
 }
 
 #ifdef CONFIG_PCI
+#ifdef CONFIG_LITE5200B
+static int
+lite5200_map_irq(struct pci_dev *dev, unsigned char idsel,
+		    unsigned char pin)
+{
+	static char pci_irq_table[][4] =
+	/*
+	 *      PCI IDSEL/INTPIN->INTLINE
+	 *        A             B             C             D
+	 */
+	{
+		{MPC52xx_IRQ0, MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3},
+		{MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3, MPC52xx_IRQ0},
+	};
+
+	const long min_idsel = 24, max_idsel = 25, irqs_per_slot = 4;
+	return PCI_IRQ_TABLE_LOOKUP;
+}
+#else /* Original Lite */
 static int
 lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
 {
 	return (pin == 1) && (idsel==24) ? MPC52xx_IRQ0 : -1;
 }
 #endif
+#endif
 
 static void __init
 lite5200_setup_cpu(void)
 {
-	struct mpc52xx_cdm  __iomem *cdm;
 	struct mpc52xx_gpio __iomem *gpio;
 	struct mpc52xx_intr __iomem *intr;
-	struct mpc52xx_xlb  __iomem *xlb;
 
 	u32 port_config;
 	u32 intr_ctrl;
 
 	/* Map zones */
-	cdm  = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
 	gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
-	xlb  = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
 	intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
 
-	if (!cdm || !gpio || !xlb || !intr) {
-		printk("lite5200.c: Error while mapping CDM/GPIO/XLB/INTR during"
-				"lite5200_setup_cpu\n");
+	if (!gpio || !intr) {
+		printk(KERN_ERR __FILE__ ": "
+			"Error while mapping GPIO/INTR during "
+			"lite5200_setup_cpu\n");
 		goto unmap_regs;
 	}
 
-	/* Use internal 48 Mhz */
-	out_8(&cdm->ext_48mhz_en, 0x00);
-	out_8(&cdm->fd_enable, 0x01);
-	if (in_be32(&cdm->rstcfg) & 0x40)	/* Assumes 33Mhz clock */
-		out_be16(&cdm->fd_counters, 0x0001);
-	else
-		out_be16(&cdm->fd_counters, 0x5555);
-
 	/* Get port mux config */
 	port_config = in_be32(&gpio->port_config);
 
@@ -116,29 +124,29 @@ lite5200_setup_cpu(void)
 	port_config &= ~0x00007000;	/* Differential mode - USB1 only */
 	port_config |=  0x00001000;
 
+	/* ATA CS is on csb_4/5 */
+	port_config &= ~0x03000000;
+	port_config |=  0x01000000;
+
 	/* Commit port config */
 	out_be32(&gpio->port_config, port_config);
 
-	/* Configure the XLB Arbiter */
-	out_be32(&xlb->master_pri_enable, 0xff);
-	out_be32(&xlb->master_priority, 0x11111111);
-
-	/* Enable ram snooping for 1GB window */
-	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
-	out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
-
-	/* IRQ[0-3] setup : IRQ0     - Level Active Low  */
-	/*                  IRQ[1-3] - Level Active High */
+	/* IRQ[0-3] setup */
 	intr_ctrl = in_be32(&intr->ctrl);
 	intr_ctrl &= ~0x00ff0000;
-	intr_ctrl |=  0x00c00000;
+#ifdef CONFIG_LITE5200B
+	/* IRQ[0-3] Level Active Low */
+	intr_ctrl |=  0x00ff0000;
+#else
+	/* IRQ0 Level Active Low
+	 * IRQ[1-3] Level Active High */
+ 	intr_ctrl |=  0x00c00000;
+#endif
 	out_be32(&intr->ctrl, intr_ctrl);
 
 	/* Unmap reg zone */
 unmap_regs:
-	if (cdm)  iounmap(cdm);
 	if (gpio) iounmap(gpio);
-	if (xlb)  iounmap(xlb);
 	if (intr) iounmap(intr);
 }
 
@@ -146,7 +154,8 @@ static void __init
 lite5200_setup_arch(void)
 {
 	/* CPU & Port mux setup */
-	lite5200_setup_cpu();
+	mpc52xx_setup_cpu();	/* Generic */
+	lite5200_setup_cpu();	/* Platform specific */
 
 #ifdef CONFIG_PCI
 	/* PCI Bridge setup */
diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c
index a0fc628..e86f615 100644
--- a/arch/ppc/platforms/prep_setup.c
+++ b/arch/ppc/platforms/prep_setup.c
@@ -736,7 +736,7 @@ ibm_statusled_progress(char *s, unsigned short hex)
 		hex = 0xfff;
 		if (!notifier_installed) {
 			++notifier_installed;
-			notifier_chain_register(&panic_notifier_list,
+			atomic_notifier_chain_register(&panic_notifier_list,
 						&ibm_statusled_block);
 		}
 	}
@@ -1067,15 +1067,13 @@ prep_map_io(void)
 static int __init
 prep_request_io(void)
 {
-	if (_machine == _MACH_prep) {
 #ifdef CONFIG_NVRAM
-		request_region(PREP_NVRAM_AS0, 0x8, "nvram");
+	request_region(PREP_NVRAM_AS0, 0x8, "nvram");
 #endif
-		request_region(0x00,0x20,"dma1");
-		request_region(0x40,0x20,"timer");
-		request_region(0x80,0x10,"dma page reg");
-		request_region(0xc0,0x20,"dma2");
-	}
+	request_region(0x00,0x20,"dma1");
+	request_region(0x40,0x20,"timer");
+	request_region(0x80,0x10,"dma page reg");
+	request_region(0xc0,0x20,"dma2");
 
 	return 0;
 }
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 5cb62c6..490749c 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -38,8 +38,6 @@ endif
 obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \
 				   ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o
 obj-$(CONFIG_PCI_QSPAN)		+= qspan_pci.o
-obj-$(CONFIG_PPC_OF)		+= prom_init.o prom.o
-obj-$(CONFIG_PPC_CHRP)		+= open_pic.o
 obj-$(CONFIG_PPC_PREP)		+= open_pic.o todc_time.o
 obj-$(CONFIG_BAMBOO)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_CPCI690)		+= todc_time.o pci_auto.o
diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c
index 9ec525f..5a5a7a9 100644
--- a/arch/ppc/syslib/mpc52xx_pci.c
+++ b/arch/ppc/syslib/mpc52xx_pci.c
@@ -225,7 +225,8 @@ mpc52xx_pci_fixup_resources(struct pci_dev *dev)
 	/* The PCI Host bridge of MPC52xx has a prefetch memory resource
 	   fixed to 1Gb. Doesn't fit in the resource system so we remove it */
 	if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
-	     (dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200) ) {
+	     (   dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200
+	      || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) {
 		struct resource *res = &dev->resource[1];
 		res->start = res->end = res->flags = 0;
 	}
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
index 2ee48ce..ee6379b 100644
--- a/arch/ppc/syslib/mpc52xx_setup.c
+++ b/arch/ppc/syslib/mpc52xx_setup.c
@@ -24,6 +24,8 @@
 #include <asm/pgtable.h>
 #include <asm/ppcboot.h>
 
+#include <syslib/mpc52xx_pci.h>
+
 extern bd_t __res;
 
 static int core_mult[] = {		/* CPU Frequency multiplier, taken    */
@@ -216,6 +218,52 @@ mpc52xx_calibrate_decr(void)
 	tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000);
 }
 
+
+void __init
+mpc52xx_setup_cpu(void)
+{
+	struct mpc52xx_cdm  __iomem *cdm;
+	struct mpc52xx_xlb  __iomem *xlb;
+
+	/* Map zones */
+	cdm  = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
+	xlb  = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
+
+	if (!cdm || !xlb) {
+		printk(KERN_ERR __FILE__ ": "
+			"Error while mapping CDM/XLB during "
+			"mpc52xx_setup_cpu\n");
+		goto unmap_regs;
+	}
+
+	/* Use internal 48 Mhz */
+	out_8(&cdm->ext_48mhz_en, 0x00);
+	out_8(&cdm->fd_enable, 0x01);
+	if (in_be32(&cdm->rstcfg) & 0x40)	/* Assumes 33Mhz clock */
+		out_be16(&cdm->fd_counters, 0x0001);
+	else
+		out_be16(&cdm->fd_counters, 0x5555);
+
+	/* Configure the XLB Arbiter priorities */
+	out_be32(&xlb->master_pri_enable, 0xff);
+	out_be32(&xlb->master_priority, 0x11111111);
+
+	/* Enable ram snooping for 1GB window */
+	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
+	out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
+
+	/* Disable XLB pipelining */
+	/* (cfr errate 292. We could do this only just before ATA PIO
+	    transaction and re-enable it after ...) */
+	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
+
+	/* Unmap reg zone */
+unmap_regs:
+	if (cdm)  iounmap(cdm);
+	if (xlb)  iounmap(xlb);
+}
+
+
 int mpc52xx_match_psc_function(int psc_idx, const char *func)
 {
 	struct mpc52xx_psc_func *cf = mpc52xx_psc_functions;
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index 38e5b93..70456c8 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -216,7 +216,7 @@ static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask,
 u_int openpic_read_IPI(volatile u_int __iomem * addr)
 {
          u_int val = 0;
-#if defined(OPENPIC_BIG_ENDIAN) || defined(CONFIG_POWER3)
+#if defined(OPENPIC_BIG_ENDIAN)
         val = in_be32(addr);
 #else
         val = in_le32(addr);
diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c
deleted file mode 100644
index 482f837..0000000
--- a/arch/ppc/syslib/prom.c
+++ /dev/null
@@ -1,1429 +0,0 @@
-/*
- * Procedures for interfacing to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * In particular, we are interested in the device tree
- * and in using some of its services (exit, write to stdout).
- *
- * Paul Mackerras	August 1996.
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <stdarg.h>
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/bitops.h>
-
-#include <asm/sections.h>
-#include <asm/prom.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/system.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/bootinfo.h>
-#include <asm/btext.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-
-
-struct pci_address {
-	unsigned a_hi;
-	unsigned a_mid;
-	unsigned a_lo;
-};
-
-struct pci_reg_property {
-	struct pci_address addr;
-	unsigned size_hi;
-	unsigned size_lo;
-};
-
-struct isa_reg_property {
-	unsigned space;
-	unsigned address;
-	unsigned size;
-};
-
-typedef unsigned long interpret_func(struct device_node *, unsigned long,
-				     int, int);
-static interpret_func interpret_pci_props;
-static interpret_func interpret_dbdma_props;
-static interpret_func interpret_isa_props;
-static interpret_func interpret_macio_props;
-static interpret_func interpret_root_props;
-
-extern char *klimit;
-
-/* Set for a newworld or CHRP machine */
-int use_of_interrupt_tree;
-struct device_node *dflt_interrupt_controller;
-int num_interrupt_controllers;
-
-extern unsigned int rtas_entry;  /* physical pointer */
-
-extern struct device_node *allnodes;
-
-static unsigned long finish_node(struct device_node *, unsigned long,
-				 interpret_func *, int, int);
-static unsigned long finish_node_interrupts(struct device_node *, unsigned long);
-static struct device_node *find_phandle(phandle);
-
-extern void enter_rtas(void *);
-void phys_call_rtas(int, int, int, ...);
-
-extern char cmd_line[512];	/* XXX */
-extern boot_infos_t *boot_infos;
-unsigned long dev_tree_size;
-
-void
-phys_call_rtas(int service, int nargs, int nret, ...)
-{
-	va_list list;
-	union {
-		unsigned long words[16];
-		double align;
-	} u;
-	void (*rtas)(void *, unsigned long);
-	int i;
-
-	u.words[0] = service;
-	u.words[1] = nargs;
-	u.words[2] = nret;
-	va_start(list, nret);
-	for (i = 0; i < nargs; ++i)
-		u.words[i+3] = va_arg(list, unsigned long);
-	va_end(list);
-
-	rtas = (void (*)(void *, unsigned long)) rtas_entry;
-	rtas(&u, rtas_data);
-}
-
-/*
- * finish_device_tree is called once things are running normally
- * (i.e. with text and data mapped to the address they were linked at).
- * It traverses the device tree and fills in the name, type,
- * {n_}addrs and {n_}intrs fields of each node.
- */
-void __init
-finish_device_tree(void)
-{
-	unsigned long mem = (unsigned long) klimit;
-	struct device_node *np;
-
-	/* All CHRPs now use the interrupt tree */
-	for (np = allnodes; np != NULL; np = np->allnext) {
-		if (get_property(np, "interrupt-parent", NULL)) {
-			use_of_interrupt_tree = 1;
-			break;
-		}
-	}
-
-	if (use_of_interrupt_tree) {
-		/*
-		 * We want to find out here how many interrupt-controller
-		 * nodes there are, and if we are booted from BootX,
-		 * we need a pointer to the first (and hopefully only)
-		 * such node.  But we can't use find_devices here since
-		 * np->name has not been set yet.  -- paulus
-		 */
-		int n = 0;
-		char *name, *ic;
-		int iclen;
-
-		for (np = allnodes; np != NULL; np = np->allnext) {
-			ic = get_property(np, "interrupt-controller", &iclen);
-			name = get_property(np, "name", NULL);
-			/* checking iclen makes sure we don't get a false
-			   match on /chosen.interrupt_controller */
-			if ((name != NULL
-			     && strcmp(name, "interrupt-controller") == 0)
-			    || (ic != NULL && iclen == 0 && strcmp(name, "AppleKiwi"))) {
-				if (n == 0)
-					dflt_interrupt_controller = np;
-				++n;
-			}
-		}
-		num_interrupt_controllers = n;
-	}
-
-	mem = finish_node(allnodes, mem, NULL, 1, 1);
-	dev_tree_size = mem - (unsigned long) allnodes;
-	klimit = (char *) mem;
-}
-
-static unsigned long __init
-finish_node(struct device_node *np, unsigned long mem_start,
-	    interpret_func *ifunc, int naddrc, int nsizec)
-{
-	struct device_node *child;
-	int *ip;
-
-	np->name = get_property(np, "name", NULL);
-	np->type = get_property(np, "device_type", NULL);
-
-	if (!np->name)
-		np->name = "<NULL>";
-	if (!np->type)
-		np->type = "<NULL>";
-
-	/* get the device addresses and interrupts */
-	if (ifunc != NULL)
-		mem_start = ifunc(np, mem_start, naddrc, nsizec);
-
-	if (use_of_interrupt_tree)
-		mem_start = finish_node_interrupts(np, mem_start);
-
-	/* Look for #address-cells and #size-cells properties. */
-	ip = (int *) get_property(np, "#address-cells", NULL);
-	if (ip != NULL)
-		naddrc = *ip;
-	ip = (int *) get_property(np, "#size-cells", NULL);
-	if (ip != NULL)
-		nsizec = *ip;
-
-	if (np->parent == NULL)
-		ifunc = interpret_root_props;
-	else if (np->type == 0)
-		ifunc = NULL;
-	else if (!strcmp(np->type, "pci") || !strcmp(np->type, "vci"))
-		ifunc = interpret_pci_props;
-	else if (!strcmp(np->type, "dbdma"))
-		ifunc = interpret_dbdma_props;
-	else if (!strcmp(np->type, "mac-io")
-		 || ifunc == interpret_macio_props)
-		ifunc = interpret_macio_props;
-	else if (!strcmp(np->type, "isa"))
-		ifunc = interpret_isa_props;
-	else if (!strcmp(np->name, "uni-n") || !strcmp(np->name, "u3"))
-		ifunc = interpret_root_props;
-	else if (!((ifunc == interpret_dbdma_props
-		    || ifunc == interpret_macio_props)
-		   && (!strcmp(np->type, "escc")
-		       || !strcmp(np->type, "media-bay"))))
-		ifunc = NULL;
-
-	/* if we were booted from BootX, convert the full name */
-	if (boot_infos
-	    && strncmp(np->full_name, "Devices:device-tree", 19) == 0) {
-		if (np->full_name[19] == 0) {
-			strcpy(np->full_name, "/");
-		} else if (np->full_name[19] == ':') {
-			char *p = np->full_name + 19;
-			np->full_name = p;
-			for (; *p; ++p)
-				if (*p == ':')
-					*p = '/';
-		}
-	}
-
-	for (child = np->child; child != NULL; child = child->sibling)
-		mem_start = finish_node(child, mem_start, ifunc,
-					naddrc, nsizec);
-
-	return mem_start;
-}
-
-/*
- * Find the interrupt parent of a node.
- */
-static struct device_node * __init
-intr_parent(struct device_node *p)
-{
-	phandle *parp;
-
-	parp = (phandle *) get_property(p, "interrupt-parent", NULL);
-	if (parp == NULL)
-		return p->parent;
-	p = find_phandle(*parp);
-	if (p != NULL)
-		return p;
-	/*
-	 * On a powermac booted with BootX, we don't get to know the
-	 * phandles for any nodes, so find_phandle will return NULL.
-	 * Fortunately these machines only have one interrupt controller
-	 * so there isn't in fact any ambiguity.  -- paulus
-	 */
-	if (num_interrupt_controllers == 1)
-		p = dflt_interrupt_controller;
-	return p;
-}
-
-/*
- * Find out the size of each entry of the interrupts property
- * for a node.
- */
-static int __init
-prom_n_intr_cells(struct device_node *np)
-{
-	struct device_node *p;
-	unsigned int *icp;
-
-	for (p = np; (p = intr_parent(p)) != NULL; ) {
-		icp = (unsigned int *)
-			get_property(p, "#interrupt-cells", NULL);
-		if (icp != NULL)
-			return *icp;
-		if (get_property(p, "interrupt-controller", NULL) != NULL
-		    || get_property(p, "interrupt-map", NULL) != NULL) {
-			printk("oops, node %s doesn't have #interrupt-cells\n",
-			       p->full_name);
-			return 1;
-		}
-	}
-	printk("prom_n_intr_cells failed for %s\n", np->full_name);
-	return 1;
-}
-
-/*
- * Map an interrupt from a device up to the platform interrupt
- * descriptor.
- */
-static int __init
-map_interrupt(unsigned int **irq, struct device_node **ictrler,
-	      struct device_node *np, unsigned int *ints, int nintrc)
-{
-	struct device_node *p, *ipar;
-	unsigned int *imap, *imask, *ip;
-	int i, imaplen, match;
-	int newintrc = 1, newaddrc = 1;
-	unsigned int *reg;
-	int naddrc;
-
-	reg = (unsigned int *) get_property(np, "reg", NULL);
-	naddrc = prom_n_addr_cells(np);
-	p = intr_parent(np);
-	while (p != NULL) {
-		if (get_property(p, "interrupt-controller", NULL) != NULL)
-			/* this node is an interrupt controller, stop here */
-			break;
-		imap = (unsigned int *)
-			get_property(p, "interrupt-map", &imaplen);
-		if (imap == NULL) {
-			p = intr_parent(p);
-			continue;
-		}
-		imask = (unsigned int *)
-			get_property(p, "interrupt-map-mask", NULL);
-		if (imask == NULL) {
-			printk("oops, %s has interrupt-map but no mask\n",
-			       p->full_name);
-			return 0;
-		}
-		imaplen /= sizeof(unsigned int);
-		match = 0;
-		ipar = NULL;
-		while (imaplen > 0 && !match) {
-			/* check the child-interrupt field */
-			match = 1;
-			for (i = 0; i < naddrc && match; ++i)
-				match = ((reg[i] ^ imap[i]) & imask[i]) == 0;
-			for (; i < naddrc + nintrc && match; ++i)
-				match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0;
-			imap += naddrc + nintrc;
-			imaplen -= naddrc + nintrc;
-			/* grab the interrupt parent */
-			ipar = find_phandle((phandle) *imap++);
-			--imaplen;
-			if (ipar == NULL && num_interrupt_controllers == 1)
-				/* cope with BootX not giving us phandles */
-				ipar = dflt_interrupt_controller;
-			if (ipar == NULL) {
-				printk("oops, no int parent %x in map of %s\n",
-				       imap[-1], p->full_name);
-				return 0;
-			}
-			/* find the parent's # addr and intr cells */
-			ip = (unsigned int *)
-				get_property(ipar, "#interrupt-cells", NULL);
-			if (ip == NULL) {
-				printk("oops, no #interrupt-cells on %s\n",
-				       ipar->full_name);
-				return 0;
-			}
-			newintrc = *ip;
-			ip = (unsigned int *)
-				get_property(ipar, "#address-cells", NULL);
-			newaddrc = (ip == NULL)? 0: *ip;
-			imap += newaddrc + newintrc;
-			imaplen -= newaddrc + newintrc;
-		}
-		if (imaplen < 0) {
-			printk("oops, error decoding int-map on %s, len=%d\n",
-			       p->full_name, imaplen);
-			return 0;
-		}
-		if (!match) {
-			printk("oops, no match in %s int-map for %s\n",
-			       p->full_name, np->full_name);
-			return 0;
-		}
-		p = ipar;
-		naddrc = newaddrc;
-		nintrc = newintrc;
-		ints = imap - nintrc;
-		reg = ints - naddrc;
-	}
-	if (p == NULL)
-		printk("hmmm, int tree for %s doesn't have ctrler\n",
-		       np->full_name);
-	*irq = ints;
-	*ictrler = p;
-	return nintrc;
-}
-
-/*
- * New version of finish_node_interrupts.
- */
-static unsigned long __init
-finish_node_interrupts(struct device_node *np, unsigned long mem_start)
-{
-	unsigned int *ints;
-	int intlen, intrcells;
-	int i, j, n, offset;
-	unsigned int *irq;
-	struct device_node *ic;
-
-	ints = (unsigned int *) get_property(np, "interrupts", &intlen);
-	if (ints == NULL)
-		return mem_start;
-	intrcells = prom_n_intr_cells(np);
-	intlen /= intrcells * sizeof(unsigned int);
-	np->n_intrs = intlen;
-	np->intrs = (struct interrupt_info *) mem_start;
-	mem_start += intlen * sizeof(struct interrupt_info);
-
-	for (i = 0; i < intlen; ++i) {
-		np->intrs[i].line = 0;
-		np->intrs[i].sense = 1;
-		n = map_interrupt(&irq, &ic, np, ints, intrcells);
-		if (n <= 0)
-			continue;
-		offset = 0;
-		/*
-		 * On a CHRP we have an 8259 which is subordinate to
-		 * the openpic in the interrupt tree, but we want the
-		 * openpic's interrupt numbers offsetted, not the 8259's.
-		 * So we apply the offset if the controller is at the
-		 * root of the interrupt tree, i.e. has no interrupt-parent.
-		 * This doesn't cope with the general case of multiple
-		 * cascaded interrupt controllers, but then neither will
-		 * irq.c at the moment either.  -- paulus
-		 * The G5 triggers that code, I add a machine test. On
-		 * those machines, we want to offset interrupts from the
-		 * second openpic by 128 -- BenH
-		 */
-		if (num_interrupt_controllers > 1
-		    && ic != NULL
-		    && get_property(ic, "interrupt-parent", NULL) == NULL)
-			offset = 16;
-
-		np->intrs[i].line = irq[0] + offset;
-		if (n > 1)
-			np->intrs[i].sense = irq[1];
-		if (n > 2) {
-			printk("hmmm, got %d intr cells for %s:", n,
-			       np->full_name);
-			for (j = 0; j < n; ++j)
-				printk(" %d", irq[j]);
-			printk("\n");
-		}
-		ints += intrcells;
-	}
-
-	return mem_start;
-}
-
-/*
- * When BootX makes a copy of the device tree from the MacOS
- * Name Registry, it is in the format we use but all of the pointers
- * are offsets from the start of the tree.
- * This procedure updates the pointers.
- */
-void __init
-relocate_nodes(void)
-{
-	unsigned long base;
-	struct device_node *np;
-	struct property *pp;
-
-#define ADDBASE(x)	(x = (typeof (x))((x)? ((unsigned long)(x) + base): 0))
-
-	base = (unsigned long) boot_infos + boot_infos->deviceTreeOffset;
-	allnodes = (struct device_node *)(base + 4);
-	for (np = allnodes; np != 0; np = np->allnext) {
-		ADDBASE(np->full_name);
-		ADDBASE(np->properties);
-		ADDBASE(np->parent);
-		ADDBASE(np->child);
-		ADDBASE(np->sibling);
-		ADDBASE(np->allnext);
-		for (pp = np->properties; pp != 0; pp = pp->next) {
-			ADDBASE(pp->name);
-			ADDBASE(pp->value);
-			ADDBASE(pp->next);
-		}
-	}
-}
-
-int
-prom_n_addr_cells(struct device_node* np)
-{
-	int* ip;
-	do {
-		if (np->parent)
-			np = np->parent;
-		ip = (int *) get_property(np, "#address-cells", NULL);
-		if (ip != NULL)
-			return *ip;
-	} while (np->parent);
-	/* No #address-cells property for the root node, default to 1 */
-	return 1;
-}
-
-int
-prom_n_size_cells(struct device_node* np)
-{
-	int* ip;
-	do {
-		if (np->parent)
-			np = np->parent;
-		ip = (int *) get_property(np, "#size-cells", NULL);
-		if (ip != NULL)
-			return *ip;
-	} while (np->parent);
-	/* No #size-cells property for the root node, default to 1 */
-	return 1;
-}
-
-static unsigned long __init
-map_addr(struct device_node *np, unsigned long space, unsigned long addr)
-{
-	int na;
-	unsigned int *ranges;
-	int rlen = 0;
-	unsigned int type;
-
-	type = (space >> 24) & 3;
-	if (type == 0)
-		return addr;
-
-	while ((np = np->parent) != NULL) {
-		if (strcmp(np->type, "pci") != 0)
-			continue;
-		/* PCI bridge: map the address through the ranges property */
-		na = prom_n_addr_cells(np);
-		ranges = (unsigned int *) get_property(np, "ranges", &rlen);
-		while ((rlen -= (na + 5) * sizeof(unsigned int)) >= 0) {
-			if (((ranges[0] >> 24) & 3) == type
-			    && ranges[2] <= addr
-			    && addr - ranges[2] < ranges[na+4]) {
-				/* ok, this matches, translate it */
-				addr += ranges[na+2] - ranges[2];
-				break;
-			}
-			ranges += na + 5;
-		}
-	}
-	return addr;
-}
-
-static unsigned long __init
-interpret_pci_props(struct device_node *np, unsigned long mem_start,
-		    int naddrc, int nsizec)
-{
-	struct address_range *adr;
-	struct pci_reg_property *pci_addrs;
-	int i, l, *ip;
-
-	pci_addrs = (struct pci_reg_property *)
-		get_property(np, "assigned-addresses", &l);
-	if (pci_addrs != 0 && l >= sizeof(struct pci_reg_property)) {
-		i = 0;
-		adr = (struct address_range *) mem_start;
-		while ((l -= sizeof(struct pci_reg_property)) >= 0) {
-			adr[i].space = pci_addrs[i].addr.a_hi;
-			adr[i].address = map_addr(np, pci_addrs[i].addr.a_hi,
-						  pci_addrs[i].addr.a_lo);
-			adr[i].size = pci_addrs[i].size_lo;
-			++i;
-		}
-		np->addrs = adr;
-		np->n_addrs = i;
-		mem_start += i * sizeof(struct address_range);
-	}
-
-	if (use_of_interrupt_tree)
-		return mem_start;
-
-	ip = (int *) get_property(np, "AAPL,interrupts", &l);
-	if (ip == 0 && np->parent)
-		ip = (int *) get_property(np->parent, "AAPL,interrupts", &l);
-	if (ip == 0)
-		ip = (int *) get_property(np, "interrupts", &l);
-	if (ip != 0) {
-		np->intrs = (struct interrupt_info *) mem_start;
-		np->n_intrs = l / sizeof(int);
-		mem_start += np->n_intrs * sizeof(struct interrupt_info);
-		for (i = 0; i < np->n_intrs; ++i) {
-			np->intrs[i].line = *ip++;
-			np->intrs[i].sense = 1;
-		}
-	}
-
-	return mem_start;
-}
-
-static unsigned long __init
-interpret_dbdma_props(struct device_node *np, unsigned long mem_start,
-		      int naddrc, int nsizec)
-{
-	struct reg_property *rp;
-	struct address_range *adr;
-	unsigned long base_address;
-	int i, l, *ip;
-	struct device_node *db;
-
-	base_address = 0;
-	for (db = np->parent; db != NULL; db = db->parent) {
-		if (!strcmp(db->type, "dbdma") && db->n_addrs != 0) {
-			base_address = db->addrs[0].address;
-			break;
-		}
-	}
-
-	rp = (struct reg_property *) get_property(np, "reg", &l);
-	if (rp != 0 && l >= sizeof(struct reg_property)) {
-		i = 0;
-		adr = (struct address_range *) mem_start;
-		while ((l -= sizeof(struct reg_property)) >= 0) {
-			adr[i].space = 2;
-			adr[i].address = rp[i].address + base_address;
-			adr[i].size = rp[i].size;
-			++i;
-		}
-		np->addrs = adr;
-		np->n_addrs = i;
-		mem_start += i * sizeof(struct address_range);
-	}
-
-	if (use_of_interrupt_tree)
-		return mem_start;
-
-	ip = (int *) get_property(np, "AAPL,interrupts", &l);
-	if (ip == 0)
-		ip = (int *) get_property(np, "interrupts", &l);
-	if (ip != 0) {
-		np->intrs = (struct interrupt_info *) mem_start;
-		np->n_intrs = l / sizeof(int);
-		mem_start += np->n_intrs * sizeof(struct interrupt_info);
-		for (i = 0; i < np->n_intrs; ++i) {
-			np->intrs[i].line = *ip++;
-			np->intrs[i].sense = 1;
-		}
-	}
-
-	return mem_start;
-}
-
-static unsigned long __init
-interpret_macio_props(struct device_node *np, unsigned long mem_start,
-		      int naddrc, int nsizec)
-{
-	struct reg_property *rp;
-	struct address_range *adr;
-	unsigned long base_address;
-	int i, l, *ip;
-	struct device_node *db;
-
-	base_address = 0;
-	for (db = np->parent; db != NULL; db = db->parent) {
-		if (!strcmp(db->type, "mac-io") && db->n_addrs != 0) {
-			base_address = db->addrs[0].address;
-			break;
-		}
-	}
-
-	rp = (struct reg_property *) get_property(np, "reg", &l);
-	if (rp != 0 && l >= sizeof(struct reg_property)) {
-		i = 0;
-		adr = (struct address_range *) mem_start;
-		while ((l -= sizeof(struct reg_property)) >= 0) {
-			adr[i].space = 2;
-			adr[i].address = rp[i].address + base_address;
-			adr[i].size = rp[i].size;
-			++i;
-		}
-		np->addrs = adr;
-		np->n_addrs = i;
-		mem_start += i * sizeof(struct address_range);
-	}
-
-	if (use_of_interrupt_tree)
-		return mem_start;
-
-	ip = (int *) get_property(np, "interrupts", &l);
-	if (ip == 0)
-		ip = (int *) get_property(np, "AAPL,interrupts", &l);
-	if (ip != 0) {
-		np->intrs = (struct interrupt_info *) mem_start;
-		np->n_intrs = l / sizeof(int);
-		for (i = 0; i < np->n_intrs; ++i) {
-			np->intrs[i].line = *ip++;
-			np->intrs[i].sense = 1;
-		}
-		mem_start += np->n_intrs * sizeof(struct interrupt_info);
-	}
-
-	return mem_start;
-}
-
-static unsigned long __init
-interpret_isa_props(struct device_node *np, unsigned long mem_start,
-		    int naddrc, int nsizec)
-{
-	struct isa_reg_property *rp;
-	struct address_range *adr;
-	int i, l, *ip;
-
-	rp = (struct isa_reg_property *) get_property(np, "reg", &l);
-	if (rp != 0 && l >= sizeof(struct isa_reg_property)) {
-		i = 0;
-		adr = (struct address_range *) mem_start;
-		while ((l -= sizeof(struct reg_property)) >= 0) {
-			adr[i].space = rp[i].space;
-			adr[i].address = rp[i].address
-				+ (adr[i].space? 0: _ISA_MEM_BASE);
-			adr[i].size = rp[i].size;
-			++i;
-		}
-		np->addrs = adr;
-		np->n_addrs = i;
-		mem_start += i * sizeof(struct address_range);
-	}
-
-	if (use_of_interrupt_tree)
-		return mem_start;
-
-	ip = (int *) get_property(np, "interrupts", &l);
-	if (ip != 0) {
-		np->intrs = (struct interrupt_info *) mem_start;
-		np->n_intrs = l / (2 * sizeof(int));
-		mem_start += np->n_intrs * sizeof(struct interrupt_info);
-		for (i = 0; i < np->n_intrs; ++i) {
-			np->intrs[i].line = *ip++;
-			np->intrs[i].sense = *ip++;
-		}
-	}
-
-	return mem_start;
-}
-
-static unsigned long __init
-interpret_root_props(struct device_node *np, unsigned long mem_start,
-		     int naddrc, int nsizec)
-{
-	struct address_range *adr;
-	int i, l, *ip;
-	unsigned int *rp;
-	int rpsize = (naddrc + nsizec) * sizeof(unsigned int);
-
-	rp = (unsigned int *) get_property(np, "reg", &l);
-	if (rp != 0 && l >= rpsize) {
-		i = 0;
-		adr = (struct address_range *) mem_start;
-		while ((l -= rpsize) >= 0) {
-			adr[i].space = (naddrc >= 2? rp[naddrc-2]: 2);
-			adr[i].address = rp[naddrc - 1];
-			adr[i].size = rp[naddrc + nsizec - 1];
-			++i;
-			rp += naddrc + nsizec;
-		}
-		np->addrs = adr;
-		np->n_addrs = i;
-		mem_start += i * sizeof(struct address_range);
-	}
-
-	if (use_of_interrupt_tree)
-		return mem_start;
-
-	ip = (int *) get_property(np, "AAPL,interrupts", &l);
-	if (ip == 0)
-		ip = (int *) get_property(np, "interrupts", &l);
-	if (ip != 0) {
-		np->intrs = (struct interrupt_info *) mem_start;
-		np->n_intrs = l / sizeof(int);
-		mem_start += np->n_intrs * sizeof(struct interrupt_info);
-		for (i = 0; i < np->n_intrs; ++i) {
-			np->intrs[i].line = *ip++;
-			np->intrs[i].sense = 1;
-		}
-	}
-
-	return mem_start;
-}
-
-/*
- * Work out the sense (active-low level / active-high edge)
- * of each interrupt from the device tree.
- */
-void __init
-prom_get_irq_senses(unsigned char *senses, int off, int max)
-{
-	struct device_node *np;
-	int i, j;
-
-	/* default to level-triggered */
-	memset(senses, 1, max - off);
-	if (!use_of_interrupt_tree)
-		return;
-
-	for (np = allnodes; np != 0; np = np->allnext) {
-		for (j = 0; j < np->n_intrs; j++) {
-			i = np->intrs[j].line;
-			if (i >= off && i < max) {
-				if (np->intrs[j].sense == 1)
-					senses[i-off] = (IRQ_SENSE_LEVEL
-						| IRQ_POLARITY_NEGATIVE);
-				else
-					senses[i-off] = (IRQ_SENSE_EDGE
-						| IRQ_POLARITY_POSITIVE);
-			}
-		}
-	}
-}
-
-/*
- * Construct and return a list of the device_nodes with a given name.
- */
-struct device_node *
-find_devices(const char *name)
-{
-	struct device_node *head, **prevp, *np;
-
-	prevp = &head;
-	for (np = allnodes; np != 0; np = np->allnext) {
-		if (np->name != 0 && strcasecmp(np->name, name) == 0) {
-			*prevp = np;
-			prevp = &np->next;
-		}
-	}
-	*prevp = NULL;
-	return head;
-}
-
-/*
- * Construct and return a list of the device_nodes with a given type.
- */
-struct device_node *
-find_type_devices(const char *type)
-{
-	struct device_node *head, **prevp, *np;
-
-	prevp = &head;
-	for (np = allnodes; np != 0; np = np->allnext) {
-		if (np->type != 0 && strcasecmp(np->type, type) == 0) {
-			*prevp = np;
-			prevp = &np->next;
-		}
-	}
-	*prevp = NULL;
-	return head;
-}
-
-/*
- * Returns all nodes linked together
- */
-struct device_node *
-find_all_nodes(void)
-{
-	struct device_node *head, **prevp, *np;
-
-	prevp = &head;
-	for (np = allnodes; np != 0; np = np->allnext) {
-		*prevp = np;
-		prevp = &np->next;
-	}
-	*prevp = NULL;
-	return head;
-}
-
-/* Checks if the given "compat" string matches one of the strings in
- * the device's "compatible" property
- */
-int
-device_is_compatible(struct device_node *device, const char *compat)
-{
-	const char* cp;
-	int cplen, l;
-
-	cp = (char *) get_property(device, "compatible", &cplen);
-	if (cp == NULL)
-		return 0;
-	while (cplen > 0) {
-		if (strncasecmp(cp, compat, strlen(compat)) == 0)
-			return 1;
-		l = strlen(cp) + 1;
-		cp += l;
-		cplen -= l;
-	}
-
-	return 0;
-}
-
-
-/*
- * Indicates whether the root node has a given value in its
- * compatible property.
- */
-int
-machine_is_compatible(const char *compat)
-{
-	struct device_node *root;
-
-	root = find_path_device("/");
-	if (root == 0)
-		return 0;
-	return device_is_compatible(root, compat);
-}
-
-/*
- * Construct and return a list of the device_nodes with a given type
- * and compatible property.
- */
-struct device_node *
-find_compatible_devices(const char *type, const char *compat)
-{
-	struct device_node *head, **prevp, *np;
-
-	prevp = &head;
-	for (np = allnodes; np != 0; np = np->allnext) {
-		if (type != NULL
-		    && !(np->type != 0 && strcasecmp(np->type, type) == 0))
-			continue;
-		if (device_is_compatible(np, compat)) {
-			*prevp = np;
-			prevp = &np->next;
-		}
-	}
-	*prevp = NULL;
-	return head;
-}
-
-/*
- * Find the device_node with a given full_name.
- */
-struct device_node *
-find_path_device(const char *path)
-{
-	struct device_node *np;
-
-	for (np = allnodes; np != 0; np = np->allnext)
-		if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0)
-			return np;
-	return NULL;
-}
-
-/*******
- *
- * New implementation of the OF "find" APIs, return a refcounted
- * object, call of_node_put() when done. Currently, still lacks
- * locking as old implementation, this is beeing done for ppc64.
- *
- * Note that property management will need some locking as well,
- * this isn't dealt with yet
- *
- *******/
-
-/**
- *	of_find_node_by_name - Find a node by it's "name" property
- *	@from:	The node to start searching from or NULL, the node
- *		you pass will not be searched, only the next one
- *		will; typically, you pass what the previous call
- *		returned. of_node_put() will be called on it
- *	@name:	The name string to match against
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_name(struct device_node *from,
-	const char *name)
-{
-	struct device_node *np = from ? from->allnext : allnodes;
-
-	for (; np != 0; np = np->allnext)
-		if (np->name != 0 && strcasecmp(np->name, name) == 0)
-			break;
-	if (from)
-		of_node_put(from);
-	return of_node_get(np);
-}
-
-/**
- *	of_find_node_by_type - Find a node by it's "device_type" property
- *	@from:	The node to start searching from or NULL, the node
- *		you pass will not be searched, only the next one
- *		will; typically, you pass what the previous call
- *		returned. of_node_put() will be called on it
- *	@name:	The type string to match against
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_type(struct device_node *from,
-	const char *type)
-{
-	struct device_node *np = from ? from->allnext : allnodes;
-
-	for (; np != 0; np = np->allnext)
-		if (np->type != 0 && strcasecmp(np->type, type) == 0)
-			break;
-	if (from)
-		of_node_put(from);
-	return of_node_get(np);
-}
-
-/**
- *	of_find_compatible_node - Find a node based on type and one of the
- *                                tokens in it's "compatible" property
- *	@from:		The node to start searching from or NULL, the node
- *			you pass will not be searched, only the next one
- *			will; typically, you pass what the previous call
- *			returned. of_node_put() will be called on it
- *	@type:		The type string to match "device_type" or NULL to ignore
- *	@compatible:	The string to match to one of the tokens in the device
- *			"compatible" list.
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_compatible_node(struct device_node *from,
-	const char *type, const char *compatible)
-{
-	struct device_node *np = from ? from->allnext : allnodes;
-
-	for (; np != 0; np = np->allnext) {
-		if (type != NULL
-		    && !(np->type != 0 && strcasecmp(np->type, type) == 0))
-			continue;
-		if (device_is_compatible(np, compatible))
-			break;
-	}
-	if (from)
-		of_node_put(from);
-	return of_node_get(np);
-}
-
-/**
- *	of_find_node_by_path - Find a node matching a full OF path
- *	@path:	The full path to match
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_path(const char *path)
-{
-	struct device_node *np = allnodes;
-
-	for (; np != 0; np = np->allnext)
-		if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0)
-			break;
-	return of_node_get(np);
-}
-
-/**
- *	of_find_all_nodes - Get next node in global list
- *	@prev:	Previous node or NULL to start iteration
- *		of_node_put() will be called on it
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_all_nodes(struct device_node *prev)
-{
-	return of_node_get(prev ? prev->allnext : allnodes);
-}
-
-/**
- *	of_get_parent - Get a node's parent if any
- *	@node:	Node to get parent
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_get_parent(const struct device_node *node)
-{
-	return node ? of_node_get(node->parent) : NULL;
-}
-
-/**
- *	of_get_next_child - Iterate a node childs
- *	@node:	parent node
- *	@prev:	previous child of the parent node, or NULL to get first
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_get_next_child(const struct device_node *node,
-				      struct device_node *prev)
-{
-	struct device_node *next = prev ? prev->sibling : node->child;
-
-	for (; next != 0; next = next->sibling)
-		if (of_node_get(next))
-			break;
-	if (prev)
-		of_node_put(prev);
-	return next;
-}
-
-/**
- *	of_node_get - Increment refcount of a node
- *	@node:	Node to inc refcount, NULL is supported to
- *		simplify writing of callers
- *
- *	Returns the node itself or NULL if gone. Current implementation
- *	does nothing as we don't yet do dynamic node allocation on ppc32
- */
-struct device_node *of_node_get(struct device_node *node)
-{
-	return node;
-}
-
-/**
- *	of_node_put - Decrement refcount of a node
- *	@node:	Node to dec refcount, NULL is supported to
- *		simplify writing of callers
- *
- *	Current implementation does nothing as we don't yet do dynamic node
- *	allocation on ppc32
- */
-void  of_node_put(struct device_node *node)
-{
-}
-
-/*
- * Find the device_node with a given phandle.
- */
-static struct device_node * __init
-find_phandle(phandle ph)
-{
-	struct device_node *np;
-
-	for (np = allnodes; np != 0; np = np->allnext)
-		if (np->node == ph)
-			return np;
-	return NULL;
-}
-
-/*
- * Find a property with a given name for a given node
- * and return the value.
- */
-unsigned char *
-get_property(struct device_node *np, const char *name, int *lenp)
-{
-	struct property *pp;
-
-	for (pp = np->properties; pp != 0; pp = pp->next)
-		if (pp->name != NULL && strcmp(pp->name, name) == 0) {
-			if (lenp != 0)
-				*lenp = pp->length;
-			return pp->value;
-		}
-	return NULL;
-}
-
-/*
- * Add a property to a node
- */
-int
-prom_add_property(struct device_node* np, struct property* prop)
-{
-	struct property **next = &np->properties;
-
-	prop->next = NULL;
-	while (*next)
-		next = &(*next)->next;
-	*next = prop;
-
-	return 0;
-}
-
-/* I quickly hacked that one, check against spec ! */
-static inline unsigned long
-bus_space_to_resource_flags(unsigned int bus_space)
-{
-	u8 space = (bus_space >> 24) & 0xf;
-	if (space == 0)
-		space = 0x02;
-	if (space == 0x02)
-		return IORESOURCE_MEM;
-	else if (space == 0x01)
-		return IORESOURCE_IO;
-	else {
-		printk(KERN_WARNING "prom.c: bus_space_to_resource_flags(), space: %x\n",
-		    	bus_space);
-		return 0;
-	}
-}
-
-static struct resource*
-find_parent_pci_resource(struct pci_dev* pdev, struct address_range *range)
-{
-	unsigned long mask;
-	int i;
-
-	/* Check this one */
-	mask = bus_space_to_resource_flags(range->space);
-	for (i=0; i<DEVICE_COUNT_RESOURCE; i++) {
-		if ((pdev->resource[i].flags & mask) == mask &&
-			pdev->resource[i].start <= range->address &&
-			pdev->resource[i].end > range->address) {
-				if ((range->address + range->size - 1) > pdev->resource[i].end) {
-					/* Add better message */
-					printk(KERN_WARNING "PCI/OF resource overlap !\n");
-					return NULL;
-				}
-				break;
-			}
-	}
-	if (i == DEVICE_COUNT_RESOURCE)
-		return NULL;
-	return &pdev->resource[i];
-}
-
-/*
- * Request an OF device resource. Currently handles child of PCI devices,
- * or other nodes attached to the root node. Ultimately, put some
- * link to resources in the OF node.
- */
-struct resource*
-request_OF_resource(struct device_node* node, int index, const char* name_postfix)
-{
-	struct pci_dev* pcidev;
-	u8 pci_bus, pci_devfn;
-	unsigned long iomask;
-	struct device_node* nd;
-	struct resource* parent;
-	struct resource *res = NULL;
-	int nlen, plen;
-
-	if (index >= node->n_addrs)
-		goto fail;
-
-	/* Sanity check on bus space */
-	iomask = bus_space_to_resource_flags(node->addrs[index].space);
-	if (iomask & IORESOURCE_MEM)
-		parent = &iomem_resource;
-	else if (iomask & IORESOURCE_IO)
-		parent = &ioport_resource;
-	else
-		goto fail;
-
-	/* Find a PCI parent if any */
-	nd = node;
-	pcidev = NULL;
-	while(nd) {
-		if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn))
-			pcidev = pci_find_slot(pci_bus, pci_devfn);
-		if (pcidev) break;
-		nd = nd->parent;
-	}
-	if (pcidev)
-		parent = find_parent_pci_resource(pcidev, &node->addrs[index]);
-	if (!parent) {
-		printk(KERN_WARNING "request_OF_resource(%s), parent not found\n",
-			node->name);
-		goto fail;
-	}
-
-	res = __request_region(parent, node->addrs[index].address, node->addrs[index].size, NULL);
-	if (!res)
-		goto fail;
-	nlen = strlen(node->name);
-	plen = name_postfix ? strlen(name_postfix) : 0;
-	res->name = (const char *)kmalloc(nlen+plen+1, GFP_KERNEL);
-	if (res->name) {
-		strcpy((char *)res->name, node->name);
-		if (plen)
-			strcpy((char *)res->name+nlen, name_postfix);
-	}
-	return res;
-fail:
-	return NULL;
-}
-
-int
-release_OF_resource(struct device_node* node, int index)
-{
-	struct pci_dev* pcidev;
-	u8 pci_bus, pci_devfn;
-	unsigned long iomask, start, end;
-	struct device_node* nd;
-	struct resource* parent;
-	struct resource *res = NULL;
-
-	if (index >= node->n_addrs)
-		return -EINVAL;
-
-	/* Sanity check on bus space */
-	iomask = bus_space_to_resource_flags(node->addrs[index].space);
-	if (iomask & IORESOURCE_MEM)
-		parent = &iomem_resource;
-	else if (iomask & IORESOURCE_IO)
-		parent = &ioport_resource;
-	else
-		return -EINVAL;
-
-	/* Find a PCI parent if any */
-	nd = node;
-	pcidev = NULL;
-	while(nd) {
-		if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn))
-			pcidev = pci_find_slot(pci_bus, pci_devfn);
-		if (pcidev) break;
-		nd = nd->parent;
-	}
-	if (pcidev)
-		parent = find_parent_pci_resource(pcidev, &node->addrs[index]);
-	if (!parent) {
-		printk(KERN_WARNING "release_OF_resource(%s), parent not found\n",
-			node->name);
-		return -ENODEV;
-	}
-
-	/* Find us in the parent and its childs */
-	res = parent->child;
-	start = node->addrs[index].address;
-	end = start + node->addrs[index].size - 1;
-	while (res) {
-		if (res->start == start && res->end == end &&
-		    (res->flags & IORESOURCE_BUSY))
-		    	break;
-		if (res->start <= start && res->end >= end)
-			res = res->child;
-		else
-			res = res->sibling;
-	}
-	if (!res)
-		return -ENODEV;
-
-	kfree(res->name);
-	res->name = NULL;
-	release_resource(res);
-	kfree(res);
-
-	return 0;
-}
-
-#if 0
-void
-print_properties(struct device_node *np)
-{
-	struct property *pp;
-	char *cp;
-	int i, n;
-
-	for (pp = np->properties; pp != 0; pp = pp->next) {
-		printk(KERN_INFO "%s", pp->name);
-		for (i = strlen(pp->name); i < 16; ++i)
-			printk(" ");
-		cp = (char *) pp->value;
-		for (i = pp->length; i > 0; --i, ++cp)
-			if ((i > 1 && (*cp < 0x20 || *cp > 0x7e))
-			    || (i == 1 && *cp != 0))
-				break;
-		if (i == 0 && pp->length > 1) {
-			/* looks like a string */
-			printk(" %s\n", (char *) pp->value);
-		} else {
-			/* dump it in hex */
-			n = pp->length;
-			if (n > 64)
-				n = 64;
-			if (pp->length % 4 == 0) {
-				unsigned int *p = (unsigned int *) pp->value;
-
-				n /= 4;
-				for (i = 0; i < n; ++i) {
-					if (i != 0 && (i % 4) == 0)
-						printk("\n                ");
-					printk(" %08x", *p++);
-				}
-			} else {
-				unsigned char *bp = pp->value;
-
-				for (i = 0; i < n; ++i) {
-					if (i != 0 && (i % 16) == 0)
-						printk("\n                ");
-					printk(" %02x", *bp++);
-				}
-			}
-			printk("\n");
-			if (pp->length > 64)
-				printk("                 ... (length = %d)\n",
-				       pp->length);
-		}
-	}
-}
-#endif
-
-static DEFINE_SPINLOCK(rtas_lock);
-
-/* this can be called after setup -- Cort */
-int
-call_rtas(const char *service, int nargs, int nret,
-	  unsigned long *outputs, ...)
-{
-	va_list list;
-	int i;
-	unsigned long s;
-	struct device_node *rtas;
-	int *tokp;
-	union {
-		unsigned long words[16];
-		double align;
-	} u;
-
-	rtas = find_devices("rtas");
-	if (rtas == NULL)
-		return -1;
-	tokp = (int *) get_property(rtas, service, NULL);
-	if (tokp == NULL) {
-		printk(KERN_ERR "No RTAS service called %s\n", service);
-		return -1;
-	}
-	u.words[0] = *tokp;
-	u.words[1] = nargs;
-	u.words[2] = nret;
-	va_start(list, outputs);
-	for (i = 0; i < nargs; ++i)
-		u.words[i+3] = va_arg(list, unsigned long);
-	va_end(list);
-
-	/*
-	 * RTAS doesn't use floating point.
-	 * Or at least, according to the CHRP spec we enter RTAS
-	 * with FP disabled, and it doesn't change the FP registers.
-	 *  -- paulus.
-	 */
-	spin_lock_irqsave(&rtas_lock, s);
-	enter_rtas((void *)__pa(&u));
-	spin_unlock_irqrestore(&rtas_lock, s);
-
-	if (nret > 1 && outputs != NULL)
-		for (i = 0; i < nret-1; ++i)
-			outputs[i] = u.words[i+nargs+4];
-	return u.words[nargs+3];
-}
diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c
deleted file mode 100644
index df14422..0000000
--- a/arch/ppc/syslib/prom_init.c
+++ /dev/null
@@ -1,1011 +0,0 @@
-/*
- * Note that prom_init() and anything called from prom_init()
- * may be running at an address that is different from the address
- * that it was linked at.  References to static data items are
- * handled by compiling this file with -mrelocatable-lib.
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/bitops.h>
-
-#include <asm/sections.h>
-#include <asm/prom.h>
-#include <asm/page.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/system.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/bootinfo.h>
-#include <asm/btext.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/cacheflush.h>
-
-#ifdef CONFIG_LOGO_LINUX_CLUT224
-#include <linux/linux_logo.h>
-extern const struct linux_logo logo_linux_clut224;
-#endif
-
-/*
- * Properties whose value is longer than this get excluded from our
- * copy of the device tree.  This way we don't waste space storing
- * things like "driver,AAPL,MacOS,PowerPC" properties.  But this value
- * does need to be big enough to ensure that we don't lose things
- * like the interrupt-map property on a PCI-PCI bridge.
- */
-#define MAX_PROPERTY_LENGTH	4096
-
-#ifndef FB_MAX			/* avoid pulling in all of the fb stuff */
-#define FB_MAX	8
-#endif
-
-#define ALIGNUL(x) (((x) + sizeof(unsigned long)-1) & -sizeof(unsigned long))
-
-typedef u32 prom_arg_t;
-
-struct prom_args {
-	const char *service;
-	int nargs;
-	int nret;
-	prom_arg_t args[10];
-};
-
-struct pci_address {
-	unsigned a_hi;
-	unsigned a_mid;
-	unsigned a_lo;
-};
-
-struct pci_reg_property {
-	struct pci_address addr;
-	unsigned size_hi;
-	unsigned size_lo;
-};
-
-struct pci_range {
-	struct pci_address addr;
-	unsigned phys;
-	unsigned size_hi;
-	unsigned size_lo;
-};
-
-struct isa_reg_property {
-	unsigned space;
-	unsigned address;
-	unsigned size;
-};
-
-struct pci_intr_map {
-	struct pci_address addr;
-	unsigned dunno;
-	phandle int_ctrler;
-	unsigned intr;
-};
-
-static void prom_exit(void);
-static int  call_prom(const char *service, int nargs, int nret, ...);
-static int  call_prom_ret(const char *service, int nargs, int nret,
-			  prom_arg_t *rets, ...);
-static void prom_print_hex(unsigned int v);
-static int  prom_set_color(ihandle ih, int i, int r, int g, int b);
-static int  prom_next_node(phandle *nodep);
-static unsigned long check_display(unsigned long mem);
-static void setup_disp_fake_bi(ihandle dp);
-static unsigned long copy_device_tree(unsigned long mem_start,
-				unsigned long mem_end);
-static unsigned long inspect_node(phandle node, struct device_node *dad,
-				unsigned long mem_start, unsigned long mem_end,
-				struct device_node ***allnextpp);
-static void prom_hold_cpus(unsigned long mem);
-static void prom_instantiate_rtas(void);
-static void * early_get_property(unsigned long base, unsigned long node,
-				char *prop);
-
-prom_entry prom __initdata;
-ihandle prom_chosen __initdata;
-ihandle prom_stdout __initdata;
-
-static char *prom_display_paths[FB_MAX] __initdata;
-static phandle prom_display_nodes[FB_MAX] __initdata;
-static unsigned int prom_num_displays __initdata;
-static ihandle prom_disp_node __initdata;
-char *of_stdout_device __initdata;
-
-unsigned int rtas_data;   /* physical pointer */
-unsigned int rtas_entry;  /* physical pointer */
-unsigned int rtas_size;
-unsigned int old_rtas;
-
-boot_infos_t *boot_infos;
-char *bootpath;
-char *bootdevice;
-struct device_node *allnodes;
-
-extern char *klimit;
-
-static void __init
-prom_exit(void)
-{
-	struct prom_args args;
-
-	args.service = "exit";
-	args.nargs = 0;
-	args.nret = 0;
-	prom(&args);
-	for (;;)			/* should never get here */
-		;
-}
-
-static int __init
-call_prom(const char *service, int nargs, int nret, ...)
-{
-	va_list list;
-	int i;
-	struct prom_args prom_args;
-
-	prom_args.service = service;
-	prom_args.nargs = nargs;
-	prom_args.nret = nret;
-	va_start(list, nret);
-	for (i = 0; i < nargs; ++i)
-		prom_args.args[i] = va_arg(list, prom_arg_t);
-	va_end(list);
-	for (i = 0; i < nret; ++i)
-		prom_args.args[i + nargs] = 0;
-	prom(&prom_args);
-	return prom_args.args[nargs];
-}
-
-static int __init
-call_prom_ret(const char *service, int nargs, int nret, prom_arg_t *rets, ...)
-{
-	va_list list;
-	int i;
-	struct prom_args prom_args;
-
-	prom_args.service = service;
-	prom_args.nargs = nargs;
-	prom_args.nret = nret;
-	va_start(list, rets);
-	for (i = 0; i < nargs; ++i)
-		prom_args.args[i] = va_arg(list, int);
-	va_end(list);
-	for (i = 0; i < nret; ++i)
-		prom_args.args[i + nargs] = 0;
-	prom(&prom_args);
-	for (i = 1; i < nret; ++i)
-		rets[i-1] = prom_args.args[nargs + i];
-	return prom_args.args[nargs];
-}
-
-void __init
-prom_print(const char *msg)
-{
-	const char *p, *q;
-
-	if (prom_stdout == 0)
-		return;
-
-	for (p = msg; *p != 0; p = q) {
-		for (q = p; *q != 0 && *q != '\n'; ++q)
-			;
-		if (q > p)
-			call_prom("write", 3, 1, prom_stdout, p, q - p);
-		if (*q != 0) {
-			++q;
-			call_prom("write", 3, 1, prom_stdout, "\r\n", 2);
-		}
-	}
-}
-
-static void __init
-prom_print_hex(unsigned int v)
-{
-	char buf[16];
-	int i, c;
-
-	for (i = 0; i < 8; ++i) {
-		c = (v >> ((7-i)*4)) & 0xf;
-		c += (c >= 10)? ('a' - 10): '0';
-		buf[i] = c;
-	}
-	buf[i] = ' ';
-	buf[i+1] = 0;
-	prom_print(buf);
-}
-
-static int __init
-prom_set_color(ihandle ih, int i, int r, int g, int b)
-{
-	return call_prom("call-method", 6, 1, "color!", ih, i, b, g, r);
-}
-
-static int __init
-prom_next_node(phandle *nodep)
-{
-	phandle node;
-
-	if ((node = *nodep) != 0
-	    && (*nodep = call_prom("child", 1, 1, node)) != 0)
-		return 1;
-	if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
-		return 1;
-	for (;;) {
-		if ((node = call_prom("parent", 1, 1, node)) == 0)
-			return 0;
-		if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
-			return 1;
-	}
-}
-
-#ifdef CONFIG_POWER4
-/*
- * Set up a hash table with a set of entries in it to map the
- * first 64MB of RAM.  This is used on 64-bit machines since
- * some of them don't have BATs.
- */
-
-static inline void make_pte(unsigned long htab, unsigned int hsize,
-			    unsigned int va, unsigned int pa, int mode)
-{
-	unsigned int *pteg;
-	unsigned int hash, i, vsid;
-
-	vsid = ((va >> 28) * 0x111) << 12;
-	hash = ((va ^ vsid) >> 5) & 0x7fff80;
-	pteg = (unsigned int *)(htab + (hash & (hsize - 1)));
-	for (i = 0; i < 8; ++i, pteg += 4) {
-		if ((pteg[1] & 1) == 0) {
-			pteg[1] = vsid | ((va >> 16) & 0xf80) | 1;
-			pteg[3] = pa | mode;
-			break;
-		}
-	}
-}
-
-extern unsigned long _SDR1;
-extern PTE *Hash;
-extern unsigned long Hash_size;
-
-static void __init
-prom_alloc_htab(void)
-{
-	unsigned int hsize;
-	unsigned long htab;
-	unsigned int addr;
-
-	/*
-	 * Because of OF bugs we can't use the "claim" client
-	 * interface to allocate memory for the hash table.
-	 * This code is only used on 64-bit PPCs, and the only
-	 * 64-bit PPCs at the moment are RS/6000s, and their
-	 * OF is based at 0xc00000 (the 12M point), so we just
-	 * arbitrarily use the 0x800000 - 0xc00000 region for the
-	 * hash table.
-	 *  -- paulus.
-	 */
-	hsize = 4 << 20;	/* POWER4 has no BATs */
-	htab = (8 << 20);
-	call_prom("claim", 3, 1, htab, hsize, 0);
-	Hash = (void *)(htab + KERNELBASE);
-	Hash_size = hsize;
-	_SDR1 = htab + __ilog2(hsize) - 18;
-
-	/*
-	 * Put in PTEs for the first 64MB of RAM
-	 */
-	memset((void *)htab, 0, hsize);
-	for (addr = 0; addr < 0x4000000; addr += 0x1000)
-		make_pte(htab, hsize, addr + KERNELBASE, addr,
-			 _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX);
-#if 0 /* DEBUG stuff mapping the SCC */
-	make_pte(htab, hsize, 0x80013000, 0x80013000,
-		 _PAGE_ACCESSED | _PAGE_NO_CACHE | _PAGE_GUARDED | PP_RWXX);
-#endif
-}
-#endif /* CONFIG_POWER4 */
-
-
-/*
- * If we have a display that we don't know how to drive,
- * we will want to try to execute OF's open method for it
- * later.  However, OF will probably fall over if we do that
- * we've taken over the MMU.
- * So we check whether we will need to open the display,
- * and if so, open it now.
- */
-static unsigned long __init
-check_display(unsigned long mem)
-{
-	phandle node;
-	ihandle ih;
-	int i, j;
-	char type[16], *path;
-	static unsigned char default_colors[] = {
-		0x00, 0x00, 0x00,
-		0x00, 0x00, 0xaa,
-		0x00, 0xaa, 0x00,
-		0x00, 0xaa, 0xaa,
-		0xaa, 0x00, 0x00,
-		0xaa, 0x00, 0xaa,
-		0xaa, 0xaa, 0x00,
-		0xaa, 0xaa, 0xaa,
-		0x55, 0x55, 0x55,
-		0x55, 0x55, 0xff,
-		0x55, 0xff, 0x55,
-		0x55, 0xff, 0xff,
-		0xff, 0x55, 0x55,
-		0xff, 0x55, 0xff,
-		0xff, 0xff, 0x55,
-		0xff, 0xff, 0xff
-	};
-	const unsigned char *clut;
-
-	prom_disp_node = 0;
-
-	for (node = 0; prom_next_node(&node); ) {
-		type[0] = 0;
-		call_prom("getprop", 4, 1, node, "device_type",
-			  type, sizeof(type));
-		if (strcmp(type, "display") != 0)
-			continue;
-		/* It seems OF doesn't null-terminate the path :-( */
-		path = (char *) mem;
-		memset(path, 0, 256);
-		if (call_prom("package-to-path", 3, 1, node, path, 255) < 0)
-			continue;
-
-		/*
-		 * If this display is the device that OF is using for stdout,
-		 * move it to the front of the list.
-		 */
-		mem += strlen(path) + 1;
-		i = prom_num_displays++;
-		if (of_stdout_device != 0 && i > 0
-		    && strcmp(of_stdout_device, path) == 0) {
-			for (; i > 0; --i) {
-				prom_display_paths[i]
-					= prom_display_paths[i-1];
-				prom_display_nodes[i]
-					= prom_display_nodes[i-1];
-			}
-		}
-		prom_display_paths[i] = path;
-		prom_display_nodes[i] = node;
-		if (i == 0)
-			prom_disp_node = node;
-		if (prom_num_displays >= FB_MAX)
-			break;
-	}
-
-	for (j=0; j<prom_num_displays; j++) {
-		path = prom_display_paths[j];
-		node = prom_display_nodes[j];
-		prom_print("opening display ");
-		prom_print(path);
-		ih = call_prom("open", 1, 1, path);
-		if (ih == 0 || ih == (ihandle) -1) {
-			prom_print("... failed\n");
-			for (i=j+1; i<prom_num_displays; i++) {
-				prom_display_paths[i-1] = prom_display_paths[i];
-				prom_display_nodes[i-1] = prom_display_nodes[i];
-			}
-			if (--prom_num_displays > 0) {
-				prom_disp_node = prom_display_nodes[j];
-				j--;
-			} else
-				prom_disp_node = 0;
-			continue;
-		} else {
-			prom_print("... ok\n");
-			call_prom("setprop", 4, 1, node, "linux,opened", 0, 0);
-
-			/*
-			 * Setup a usable color table when the appropriate
-			 * method is available.
-			 * Should update this to use set-colors.
-			 */
-			clut = default_colors;
-			for (i = 0; i < 32; i++, clut += 3)
-				if (prom_set_color(ih, i, clut[0], clut[1],
-						   clut[2]) != 0)
-					break;
-
-#ifdef CONFIG_LOGO_LINUX_CLUT224
-			clut = PTRRELOC(logo_linux_clut224.clut);
-			for (i = 0; i < logo_linux_clut224.clutsize;
-			     i++, clut += 3)
-				if (prom_set_color(ih, i + 32, clut[0],
-						   clut[1], clut[2]) != 0)
-					break;
-#endif /* CONFIG_LOGO_LINUX_CLUT224 */
-		}
-	}
-	
-	if (prom_stdout) {
-		phandle p;
-		p = call_prom("instance-to-package", 1, 1, prom_stdout);
-		if (p && p != -1) {
-			type[0] = 0;
-			call_prom("getprop", 4, 1, p, "device_type",
-				  type, sizeof(type));
-			if (strcmp(type, "display") == 0)
-				call_prom("setprop", 4, 1, p, "linux,boot-display",
-					  0, 0);
-		}
-	}
-
-	return ALIGNUL(mem);
-}
-
-/* This function will enable the early boot text when doing OF booting. This
- * way, xmon output should work too
- */
-static void __init
-setup_disp_fake_bi(ihandle dp)
-{
-#ifdef CONFIG_BOOTX_TEXT
-	int width = 640, height = 480, depth = 8, pitch;
-	unsigned address;
-	struct pci_reg_property addrs[8];
-	int i, naddrs;
-	char name[32];
-	char *getprop = "getprop";
-
-	prom_print("Initializing fake screen: ");
-
-	memset(name, 0, sizeof(name));
-	call_prom(getprop, 4, 1, dp, "name", name, sizeof(name));
-	name[sizeof(name)-1] = 0;
-	prom_print(name);
-	prom_print("\n");
-	call_prom(getprop, 4, 1, dp, "width", &width, sizeof(width));
-	call_prom(getprop, 4, 1, dp, "height", &height, sizeof(height));
-	call_prom(getprop, 4, 1, dp, "depth", &depth, sizeof(depth));
-	pitch = width * ((depth + 7) / 8);
-	call_prom(getprop, 4, 1, dp, "linebytes",
-		  &pitch, sizeof(pitch));
-	if (pitch == 1)
-		pitch = 0x1000;		/* for strange IBM display */
-	address = 0;
-	call_prom(getprop, 4, 1, dp, "address",
-		  &address, sizeof(address));
-	if (address == 0) {
-		/* look for an assigned address with a size of >= 1MB */
-		naddrs = call_prom(getprop, 4, 1, dp, "assigned-addresses",
-				   addrs, sizeof(addrs));
-		naddrs /= sizeof(struct pci_reg_property);
-		for (i = 0; i < naddrs; ++i) {
-			if (addrs[i].size_lo >= (1 << 20)) {
-				address = addrs[i].addr.a_lo;
-				/* use the BE aperture if possible */
-				if (addrs[i].size_lo >= (16 << 20))
-					address += (8 << 20);
-				break;
-			}
-		}
-		if (address == 0) {
-			prom_print("Failed to get address\n");
-			return;
-		}
-	}
-	/* kludge for valkyrie */
-	if (strcmp(name, "valkyrie") == 0)
-		address += 0x1000;
-
-#ifdef CONFIG_POWER4
-#if CONFIG_TASK_SIZE > 0x80000000
-#error CONFIG_TASK_SIZE cannot be above 0x80000000 with BOOTX_TEXT on G5
-#endif
-	{
-		extern boot_infos_t disp_bi;
-		unsigned long va, pa, i, offset;
-       		va = 0x90000000;
-		pa = address & 0xfffff000ul;
-		offset = address & 0x00000fff;
-
-		for (i=0; i<0x4000; i++) {  
-			make_pte((unsigned long)Hash - KERNELBASE, Hash_size, va, pa, 
-				 _PAGE_ACCESSED | _PAGE_NO_CACHE |
-				 _PAGE_GUARDED | PP_RWXX);
-			va += 0x1000;
-			pa += 0x1000;
-		}
-		btext_setup_display(width, height, depth, pitch, 0x90000000 | offset);
-		disp_bi.dispDeviceBase = (u8 *)address;
-	}
-#else /* CONFIG_POWER4 */
-	btext_setup_display(width, height, depth, pitch, address);
-	btext_prepare_BAT();
-#endif /* CONFIG_POWER4 */
-#endif /* CONFIG_BOOTX_TEXT */
-}
-
-/*
- * Make a copy of the device tree from the PROM.
- */
-static unsigned long __init
-copy_device_tree(unsigned long mem_start, unsigned long mem_end)
-{
-	phandle root;
-	unsigned long new_start;
-	struct device_node **allnextp;
-
-	root = call_prom("peer", 1, 1, (phandle)0);
-	if (root == (phandle)0) {
-		prom_print("couldn't get device tree root\n");
-		prom_exit();
-	}
-	allnextp = &allnodes;
-	mem_start = ALIGNUL(mem_start);
-	new_start = inspect_node(root, NULL, mem_start, mem_end, &allnextp);
-	*allnextp = NULL;
-	return new_start;
-}
-
-static unsigned long __init
-inspect_node(phandle node, struct device_node *dad,
-	     unsigned long mem_start, unsigned long mem_end,
-	     struct device_node ***allnextpp)
-{
-	int l;
-	phandle child;
-	struct device_node *np;
-	struct property *pp, **prev_propp;
-	char *prev_name, *namep;
-	unsigned char *valp;
-
-	np = (struct device_node *) mem_start;
-	mem_start += sizeof(struct device_node);
-	memset(np, 0, sizeof(*np));
-	np->node = node;
-	**allnextpp = PTRUNRELOC(np);
-	*allnextpp = &np->allnext;
-	if (dad != 0) {
-		np->parent = PTRUNRELOC(dad);
-		/* we temporarily use the `next' field as `last_child'. */
-		if (dad->next == 0)
-			dad->child = PTRUNRELOC(np);
-		else
-			dad->next->sibling = PTRUNRELOC(np);
-		dad->next = np;
-	}
-
-	/* get and store all properties */
-	prev_propp = &np->properties;
-	prev_name = "";
-	for (;;) {
-		pp = (struct property *) mem_start;
-		namep = (char *) (pp + 1);
-		pp->name = PTRUNRELOC(namep);
-		if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0)
-			break;
-		mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1);
-		prev_name = namep;
-		valp = (unsigned char *) mem_start;
-		pp->value = PTRUNRELOC(valp);
-		pp->length = call_prom("getprop", 4, 1, node, namep,
-				       valp, mem_end - mem_start);
-		if (pp->length < 0)
-			continue;
-#ifdef MAX_PROPERTY_LENGTH
-		if (pp->length > MAX_PROPERTY_LENGTH)
-			continue; /* ignore this property */
-#endif
-		mem_start = ALIGNUL(mem_start + pp->length);
-		*prev_propp = PTRUNRELOC(pp);
-		prev_propp = &pp->next;
-	}
-	if (np->node != 0) {
-		/* Add a "linux,phandle" property" */
-		pp = (struct property *) mem_start;
-		*prev_propp = PTRUNRELOC(pp);
-		prev_propp = &pp->next;
-		namep = (char *) (pp + 1);
-		pp->name = PTRUNRELOC(namep);
-		strcpy(namep, "linux,phandle");
-		mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1);
-		pp->value = (unsigned char *) PTRUNRELOC(&np->node);
-		pp->length = sizeof(np->node);
-	}
-	*prev_propp = NULL;
-
-	/* get the node's full name */
-	l = call_prom("package-to-path", 3, 1, node,
-		      mem_start, mem_end - mem_start);
-	if (l >= 0) {
-		char *p, *ep;
-
-		np->full_name = PTRUNRELOC((char *) mem_start);
-		*(char *)(mem_start + l) = 0;
-		/* Fixup an Apple bug where they have bogus \0 chars in the
-		 * middle of the path in some properties
-		 */
-		for (p = (char *)mem_start, ep = p + l; p < ep; p++)
-			if ((*p) == '\0') {
-				memmove(p, p+1, ep - p);
-				ep--;
-			}
-		mem_start = ALIGNUL(mem_start + l + 1);
-	}
-
-	/* do all our children */
-	child = call_prom("child", 1, 1, node);
-	while (child != 0) {
-		mem_start = inspect_node(child, np, mem_start, mem_end,
-					 allnextpp);
-		child = call_prom("peer", 1, 1, child);
-	}
-
-	return mem_start;
-}
-
-unsigned long smp_chrp_cpu_nr __initdata = 0;
-
-/*
- * With CHRP SMP we need to use the OF to start the other
- * processors so we can't wait until smp_boot_cpus (the OF is
- * trashed by then) so we have to put the processors into
- * a holding pattern controlled by the kernel (not OF) before
- * we destroy the OF.
- *
- * This uses a chunk of high memory, puts some holding pattern
- * code there and sends the other processors off to there until
- * smp_boot_cpus tells them to do something.  We do that by using
- * physical address 0x0.  The holding pattern checks that address
- * until its cpu # is there, when it is that cpu jumps to
- * __secondary_start().  smp_boot_cpus() takes care of setting those
- * values.
- *
- * We also use physical address 0x4 here to tell when a cpu
- * is in its holding pattern code.
- *
- * -- Cort
- *
- * Note that we have to do this if we have more than one CPU,
- * even if this is a UP kernel.  Otherwise when we trash OF
- * the other CPUs will start executing some random instructions
- * and crash the system.  -- paulus
- */
-static void __init
-prom_hold_cpus(unsigned long mem)
-{
-	extern void __secondary_hold(void);
-	unsigned long i;
-	int cpu;
-	phandle node;
-	char type[16], *path;
-	unsigned int reg;
-
-	/*
-	 * XXX: hack to make sure we're chrp, assume that if we're
-	 *      chrp we have a device_type property -- Cort
-	 */
-	node = call_prom("finddevice", 1, 1, "/");
-	if (call_prom("getprop", 4, 1, node,
-		      "device_type", type, sizeof(type)) <= 0)
-		return;
-
-	/* copy the holding pattern code to someplace safe (0) */
-	/* the holding pattern is now within the first 0x100
-	   bytes of the kernel image -- paulus */
-	memcpy((void *)0, _stext, 0x100);
-	flush_icache_range(0, 0x100);
-
-	/* look for cpus */
-	*(unsigned long *)(0x0) = 0;
-	asm volatile("dcbf 0,%0": : "r" (0) : "memory");
-	for (node = 0; prom_next_node(&node); ) {
-		type[0] = 0;
-		call_prom("getprop", 4, 1, node, "device_type",
-			  type, sizeof(type));
-		if (strcmp(type, "cpu") != 0)
-			continue;
-		path = (char *) mem;
-		memset(path, 0, 256);
-		if (call_prom("package-to-path", 3, 1, node, path, 255) < 0)
-			continue;
-		reg = -1;
-		call_prom("getprop", 4, 1, node, "reg", &reg, sizeof(reg));
-		cpu = smp_chrp_cpu_nr++;
-#ifdef CONFIG_SMP
-		smp_hw_index[cpu] = reg;
-#endif /* CONFIG_SMP */
-		/* XXX: hack - don't start cpu 0, this cpu -- Cort */
-		if (cpu == 0)
-			continue;
-		prom_print("starting cpu ");
-		prom_print(path);
-		*(ulong *)(0x4) = 0;
-		call_prom("start-cpu", 3, 0, node,
-			  (char *)__secondary_hold - _stext, cpu);
-		prom_print("...");
-		for ( i = 0 ; (i < 10000) && (*(ulong *)(0x4) == 0); i++ )
-			;
-		if (*(ulong *)(0x4) == cpu)
-			prom_print("ok\n");
-		else {
-			prom_print("failed: ");
-			prom_print_hex(*(ulong *)0x4);
-			prom_print("\n");
-		}
-	}
-}
-
-static void __init
-prom_instantiate_rtas(void)
-{
-	ihandle prom_rtas;
-	prom_arg_t result;
-
-	prom_rtas = call_prom("finddevice", 1, 1, "/rtas");
-	if (prom_rtas == -1)
-		return;
-
-	rtas_size = 0;
-	call_prom("getprop", 4, 1, prom_rtas,
-		  "rtas-size", &rtas_size, sizeof(rtas_size));
-	prom_print("instantiating rtas");
-	if (rtas_size == 0) {
-		rtas_data = 0;
-	} else {
-		/*
-		 * Ask OF for some space for RTAS.
-		 * Actually OF has bugs so we just arbitrarily
-		 * use memory at the 6MB point.
-		 */
-		rtas_data = 6 << 20;
-		prom_print(" at ");
-		prom_print_hex(rtas_data);
-	}
-
-	prom_rtas = call_prom("open", 1, 1, "/rtas");
-	prom_print("...");
-	rtas_entry = 0;
-	if (call_prom_ret("call-method", 3, 2, &result,
-			  "instantiate-rtas", prom_rtas, rtas_data) == 0)
-		rtas_entry = result;
-	if ((rtas_entry == -1) || (rtas_entry == 0))
-		prom_print(" failed\n");
-	else
-		prom_print(" done\n");
-}
-
-/*
- * We enter here early on, when the Open Firmware prom is still
- * handling exceptions and the MMU hash table for us.
- */
-unsigned long __init
-prom_init(int r3, int r4, prom_entry pp)
-{
-	unsigned long mem;
-	ihandle prom_mmu;
-	unsigned long offset = reloc_offset();
-	int i, l;
-	char *p, *d;
- 	unsigned long phys;
-	prom_arg_t result[3];
-	char model[32];
-	phandle node;
-	int rc;
-
- 	/* Default */
- 	phys = (unsigned long) &_stext;
-
-	/* First get a handle for the stdout device */
-	prom = pp;
-	prom_chosen = call_prom("finddevice", 1, 1, "/chosen");
-	if (prom_chosen == -1)
-		prom_exit();
-	if (call_prom("getprop", 4, 1, prom_chosen, "stdout",
-		      &prom_stdout, sizeof(prom_stdout)) <= 0)
-		prom_exit();
-
-	/* Get the full OF pathname of the stdout device */
-	mem = (unsigned long) klimit + offset;
-	p = (char *) mem;
-	memset(p, 0, 256);
-	call_prom("instance-to-path", 3, 1, prom_stdout, p, 255);
-	of_stdout_device = p;
-	mem += strlen(p) + 1;
-
-	/* Get the boot device and translate it to a full OF pathname. */
-	p = (char *) mem;
-	l = call_prom("getprop", 4, 1, prom_chosen, "bootpath", p, 1<<20);
-	if (l > 0) {
-		p[l] = 0;	/* should already be null-terminated */
-		bootpath = PTRUNRELOC(p);
-		mem += l + 1;
-		d = (char *) mem;
-		*d = 0;
-		call_prom("canon", 3, 1, p, d, 1<<20);
-		bootdevice = PTRUNRELOC(d);
-		mem = ALIGNUL(mem + strlen(d) + 1);
-	}
-
-	prom_instantiate_rtas();
-
-#ifdef CONFIG_POWER4
-	/*
-	 * Find out how much memory we have and allocate a
-	 * suitably-sized hash table.
-	 */
-	prom_alloc_htab();
-#endif
-	mem = check_display(mem);
-
-	prom_print("copying OF device tree...");
-	mem = copy_device_tree(mem, mem + (1<<20));
-	prom_print("done\n");
-
-	prom_hold_cpus(mem);
-
-	klimit = (char *) (mem - offset);
-
-	node = call_prom("finddevice", 1, 1, "/");
-	rc = call_prom("getprop", 4, 1, node, "model", model, sizeof(model));
-	if (rc > 0 && !strncmp (model, "Pegasos", 7)
-		&& strncmp (model, "Pegasos2", 8)) {
-		/* Pegasos 1 has a broken translate method in the OF,
-		 * and furthermore the BATs are mapped 1:1 so the phys
-		 * address calculated above is correct, so let's use
-		 * it directly.
-		 */
-	} else if (offset == 0) {
-		/* If we are already running at 0xc0000000, we assume we were
-	 	 * loaded by an OF bootloader which did set a BAT for us.
-	 	 * This breaks OF translate so we force phys to be 0.
-	 	 */
-		prom_print("(already at 0xc0000000) phys=0\n");
-		phys = 0;
-	} else if (call_prom("getprop", 4, 1, prom_chosen, "mmu",
-			     &prom_mmu, sizeof(prom_mmu)) <= 0) {
-		prom_print(" no MMU found\n");
-	} else if (call_prom_ret("call-method", 4, 4, result, "translate",
-				 prom_mmu, &_stext, 1) != 0) {
-		prom_print(" (translate failed)\n");
-	} else {
-		/* We assume the phys. address size is 3 cells */
-		phys = result[2];
-	}
-
-	if (prom_disp_node != 0)
-		setup_disp_fake_bi(prom_disp_node);
-
-	/* Use quiesce call to get OF to shut down any devices it's using */
-	prom_print("Calling quiesce ...\n");
-	call_prom("quiesce", 0, 0);
-
-	/* Relocate various pointers which will be used once the
-	   kernel is running at the address it was linked at. */
-	for (i = 0; i < prom_num_displays; ++i)
-		prom_display_paths[i] = PTRUNRELOC(prom_display_paths[i]);
-
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-	/* Relocate the of stdout for console autodetection */
-	of_stdout_device = PTRUNRELOC(of_stdout_device);
-#endif
-
-	prom_print("returning 0x");
-	prom_print_hex(phys);
-	prom_print("from prom_init\n");
-	prom_stdout = 0;
-
-	return phys;
-}
-
-/*
- * early_get_property is used to access the device tree image prepared
- * by BootX very early on, before the pointers in it have been relocated.
- */
-static void * __init
-early_get_property(unsigned long base, unsigned long node, char *prop)
-{
-	struct device_node *np = (struct device_node *)(base + node);
-	struct property *pp;
-
-	for (pp = np->properties; pp != 0; pp = pp->next) {
-		pp = (struct property *) (base + (unsigned long)pp);
-		if (strcmp((char *)((unsigned long)pp->name + base),
-			   prop) == 0) {
-			return (void *)((unsigned long)pp->value + base);
-		}
-	}
-	return NULL;
-}
-
-/* Is boot-info compatible ? */
-#define BOOT_INFO_IS_COMPATIBLE(bi)		((bi)->compatible_version <= BOOT_INFO_VERSION)
-#define BOOT_INFO_IS_V2_COMPATIBLE(bi)	((bi)->version >= 2)
-#define BOOT_INFO_IS_V4_COMPATIBLE(bi)	((bi)->version >= 4)
-
-void __init
-bootx_init(unsigned long r4, unsigned long phys)
-{
-	boot_infos_t *bi = (boot_infos_t *) r4;
-	unsigned long space;
-	unsigned long ptr, x;
-	char *model;
-
-	boot_infos = PTRUNRELOC(bi);
-	if (!BOOT_INFO_IS_V2_COMPATIBLE(bi))
-		bi->logicalDisplayBase = NULL;
-
-#ifdef CONFIG_BOOTX_TEXT
-	btext_init(bi);
-
-	/*
-	 * Test if boot-info is compatible.  Done only in config
-	 * CONFIG_BOOTX_TEXT since there is nothing much we can do
-	 * with an incompatible version, except display a message
-	 * and eventually hang the processor...
-	 *
-	 * I'll try to keep enough of boot-info compatible in the
-	 * future to always allow display of this message;
-	 */
-	if (!BOOT_INFO_IS_COMPATIBLE(bi)) {
-		btext_drawstring(" !!! WARNING - Incompatible version of BootX !!!\n\n\n");
-		btext_flushscreen();
-	}
-#endif	/* CONFIG_BOOTX_TEXT */
-
-	/* New BootX enters kernel with MMU off, i/os are not allowed
-	   here. This hack will have been done by the boostrap anyway.
-	*/
-	if (bi->version < 4) {
-		/*
-		 * XXX If this is an iMac, turn off the USB controller.
-		 */
-		model = (char *) early_get_property
-			(r4 + bi->deviceTreeOffset, 4, "model");
-		if (model
-		    && (strcmp(model, "iMac,1") == 0
-			|| strcmp(model, "PowerMac1,1") == 0)) {
-			out_le32((unsigned *)0x80880008, 1);	/* XXX */
-		}
-	}
-
-	/* Move klimit to enclose device tree, args, ramdisk, etc... */
-	if (bi->version < 5) {
-		space = bi->deviceTreeOffset + bi->deviceTreeSize;
-		if (bi->ramDisk)
-			space = bi->ramDisk + bi->ramDiskSize;
-	} else
-		space = bi->totalParamsSize;
-	klimit = PTRUNRELOC((char *) bi + space);
-
-	/* New BootX will have flushed all TLBs and enters kernel with
-	   MMU switched OFF, so this should not be useful anymore.
-	*/
-	if (bi->version < 4) {
-		/*
-		 * Touch each page to make sure the PTEs for them
-		 * are in the hash table - the aim is to try to avoid
-		 * getting DSI exceptions while copying the kernel image.
-		 */
-		for (ptr = ((unsigned long) &_stext) & PAGE_MASK;
-		     ptr < (unsigned long)bi + space; ptr += PAGE_SIZE)
-			x = *(volatile unsigned long *)ptr;
-	}
-
-#ifdef CONFIG_BOOTX_TEXT
-	/*
-	 * Note that after we call btext_prepare_BAT, we can't do
-	 * prom_draw*, flushscreen or clearscreen until we turn the MMU
-	 * on, since btext_prepare_BAT sets disp_bi.logicalDisplayBase
-	 * to a virtual address.
-	 */
-	btext_prepare_BAT();
-#endif
-}
diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c
index ff86b2d..cfc2d6a 100644
--- a/arch/ppc/xmon/start.c
+++ b/arch/ppc/xmon/start.c
@@ -58,7 +58,7 @@ static struct sysrq_key_op sysrq_xmon_op =
 void
 xmon_map_scc(void)
 {
-#ifdef CONFIG_PPC_MULTIPLATFORM
+#ifdef CONFIG_PPC_PREP
 	volatile unsigned char *base;
 
 #elif defined(CONFIG_GEMINI)