Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

32 files changed, 3243 insertions, 249 deletions

diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 11899f0..54a0a9b 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -481,6 +481,53 @@ config WINCEPT
 
 endchoice
 
+menu "Freescale Ethernet driver platform-specific options"
+	depends on FS_ENET
+
+	config MPC8xx_SECOND_ETH
+	bool "Second Ethernet channel"
+	depends on (MPC885ADS || MPC86XADS)
+	default y
+	help
+	  This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
+	  The latter will use SCC1, for 885ADS you can select it below.
+
+	choice
+		prompt "Second Ethernet channel"
+		depends on MPC8xx_SECOND_ETH
+		default MPC8xx_SECOND_ETH_FEC2
+
+		config MPC8xx_SECOND_ETH_FEC2
+		bool "FEC2"
+		depends on MPC885ADS
+		help
+		  Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
+		  (often 2-nd UART) will not work if this is enabled.
+
+		config MPC8xx_SECOND_ETH_SCC1
+		bool "SCC1"
+		depends on MPC86XADS
+		select MPC8xx_SCC_ENET_FIXED
+		help
+		  Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1
+		  (often 1-nd UART) will not work if this is enabled.
+
+		config MPC8xx_SECOND_ETH_SCC3
+		bool "SCC3"
+		depends on MPC885ADS
+		help
+		  Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
+		  (often 1-nd UART) will not work if this is enabled.
+
+	endchoice
+
+	config MPC8xx_SCC_ENET_FIXED
+	depends on MPC8xx_SECOND_ETH_SCC
+	default n
+	bool "Use fixed MII-less mode for SCC Ethernet"
+
+endmenu
+
 choice
 	prompt "Machine Type"
 	depends on 6xx || POWER3
diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug
index 61653cb..8cc75ab 100644
--- a/arch/ppc/Kconfig.debug
+++ b/arch/ppc/Kconfig.debug
@@ -67,7 +67,7 @@ config SERIAL_TEXT_DEBUG
 
 config PPC_OCP
 	bool
-	depends on IBM_OCP || XILINX_OCP
+	depends on IBM_OCP
 	default y
 
 endmenu
diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c
index 26818bb..4f00c93 100644
--- a/arch/ppc/boot/common/ns16550.c
+++ b/arch/ppc/boot/common/ns16550.c
@@ -8,6 +8,9 @@
 #include <linux/serial_reg.h>
 #include <asm/serial.h>
 
+#if defined(CONFIG_XILINX_VIRTEX)
+#include <platforms/4xx/xparameters/xparameters.h>
+#endif
 #include "nonstdio.h"
 #include "serial.h"
 
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
index 9533f8d..28be01b 100644
--- a/arch/ppc/boot/simple/Makefile
+++ b/arch/ppc/boot/simple/Makefile
@@ -192,6 +192,7 @@ boot-$(CONFIG_8xx)		+= embed_config.o
 boot-$(CONFIG_8260)		+= embed_config.o
 boot-$(CONFIG_EP405)		+= embed_config.o
 boot-$(CONFIG_XILINX_ML300)	+= embed_config.o
+boot-$(CONFIG_XILINX_ML403)	+= embed_config.o
 boot-$(CONFIG_BSEIP)		+= iic.o
 boot-$(CONFIG_MBX)		+= iic.o pci.o qspan_pci.o
 boot-$(CONFIG_MV64X60)		+= misc-mv64x60.o
diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c
index 491a691..3a51b10 100644
--- a/arch/ppc/boot/simple/embed_config.c
+++ b/arch/ppc/boot/simple/embed_config.c
@@ -21,6 +21,9 @@
 #ifdef CONFIG_40x
 #include <asm/io.h>
 #endif
+#ifdef CONFIG_XILINX_VIRTEX
+#include <platforms/4xx/xparameters/xparameters.h>
+#endif
 extern unsigned long timebase_period_ns;
 
 /* For those boards that don't provide one.
@@ -742,7 +745,7 @@ embed_config(bd_t **bdp)
 }
 #endif /* WILLOW */
 
-#ifdef CONFIG_XILINX_ML300
+#if defined(CONFIG_XILINX_ML300) || defined(CONFIG_XILINX_ML403)
 void
 embed_config(bd_t ** bdp)
 {
@@ -779,7 +782,7 @@ embed_config(bd_t ** bdp)
 	timebase_period_ns = 1000000000 / bd->bi_tbfreq;
 	/* see bi_tbfreq definition in arch/ppc/platforms/4xx/xilinx_ml300.h */
 }
-#endif /* CONFIG_XILINX_ML300 */
+#endif /* CONFIG_XILINX_ML300 || CONFIG_XILINX_ML403 */
 
 #ifdef CONFIG_IBM_OPENBIOS
 /* This could possibly work for all treeboot roms.
diff --git a/arch/ppc/boot/simple/head.S b/arch/ppc/boot/simple/head.S
index 5e4adc2..119b9dc 100644
--- a/arch/ppc/boot/simple/head.S
+++ b/arch/ppc/boot/simple/head.S
@@ -65,6 +65,13 @@ start_:
 			 */
 #endif
 
+#if defined(CONFIG_XILINX_VIRTEX_4_FX)
+	/* PPC errata 213: only for Virtex-4 FX */
+	mfccr0  0
+	oris    0,0,0x50000000@h
+	mtccr0  0
+#endif
+
 	mflr	r3	/* Save our actual starting address. */
 
 	/* The following functions we call must not modify r3 or r4.....
diff --git a/arch/ppc/configs/ml300_defconfig b/arch/ppc/configs/ml300_defconfig
new file mode 100644
index 0000000..4a33aca
--- /dev/null
+++ b/arch/ppc/configs/ml300_defconfig
@@ -0,0 +1,739 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16-rc1
+# Wed Jan 18 00:49:20 2006
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_LBD=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_POWER3 is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_4xx=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# IBM 4xx options
+#
+# CONFIG_BUBINGA is not set
+# CONFIG_CPCI405 is not set
+# CONFIG_EP405 is not set
+# CONFIG_REDWOOD_5 is not set
+# CONFIG_REDWOOD_6 is not set
+# CONFIG_SYCAMORE is not set
+# CONFIG_WALNUT is not set
+CONFIG_XILINX_ML300=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_EMBEDDEDBOOT=y
+# CONFIG_PPC4xx_DMA is not set
+CONFIG_PPC_GEN550=y
+CONFIG_UART0_TTYS0=y
+# CONFIG_UART0_TTYS1 is not set
+CONFIG_NOT_COHERENT_CACHE=y
+
+#
+# Platform options
+#
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,9600"
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_IBM_EMAC is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# IBM 40x options
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KGDB is not set
+CONFIG_XMON=y
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ppc/configs/ml403_defconfig b/arch/ppc/configs/ml403_defconfig
new file mode 100644
index 0000000..fafd251
--- /dev/null
+++ b/arch/ppc/configs/ml403_defconfig
@@ -0,0 +1,740 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16-rc1
+# Wed Jan 18 01:11:41 2006
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_PPC=y
+CONFIG_PPC32=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_LBD=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor
+#
+# CONFIG_6xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_POWER3 is not set
+# CONFIG_8xx is not set
+# CONFIG_E200 is not set
+# CONFIG_E500 is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_4xx=y
+# CONFIG_WANT_EARLY_SERIAL is not set
+
+#
+# IBM 4xx options
+#
+# CONFIG_BUBINGA is not set
+# CONFIG_CPCI405 is not set
+# CONFIG_EP405 is not set
+# CONFIG_REDWOOD_5 is not set
+# CONFIG_REDWOOD_6 is not set
+# CONFIG_SYCAMORE is not set
+# CONFIG_WALNUT is not set
+# CONFIG_XILINX_ML300 is not set
+CONFIG_XILINX_ML403=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_EMBEDDEDBOOT=y
+# CONFIG_PPC4xx_DMA is not set
+CONFIG_PPC_GEN550=y
+CONFIG_UART0_TTYS0=y
+# CONFIG_UART0_TTYS1 is not set
+CONFIG_NOT_COHERENT_CACHE=y
+
+#
+# Platform options
+#
+# CONFIG_PC_KEYBOARD is not set
+# CONFIG_HIGHMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,9600"
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Macintosh device drivers
+#
+# CONFIG_WINDFARM is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_IBM_EMAC is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# IBM 40x options
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KGDB is not set
+CONFIG_XMON=y
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S
index 3e6ca7f..c1e89ad 100644
--- a/arch/ppc/kernel/head_8xx.S
+++ b/arch/ppc/kernel/head_8xx.S
@@ -810,13 +810,16 @@ initial_mmu:
 	mtspr	SPRN_MD_TWC, r9
 	li	r11, MI_BOOTINIT	/* Create RPN for address 0 */
 	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r8
+	mtspr	SPRN_MD_RPN, r11
+
+	addi	r10, r10, 0x0100
+	mtspr	SPRN_MD_CTR, r10
 
 	addis	r8, r8, 0x0080		/* Add 8M */
 	mtspr	SPRN_MD_EPN, r8
 	mtspr	SPRN_MD_TWC, r9
 	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r8
+	mtspr	SPRN_MD_RPN, r11
 #endif
 
 	/* Since the cache is enabled according to the information we
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index d883791..174ddbc 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -57,6 +57,10 @@ config XILINX_ML300
 	help
 	  This option enables support for the Xilinx ML300 evaluation board.
 
+config XILINX_ML403
+	bool "Xilinx-ML403"
+	help
+	  This option enables support for the Xilinx ML403 evaluation board.
 endchoice
 
 choice
@@ -172,11 +176,6 @@ config IBM_OCP
 	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
 	default y
 
-config XILINX_OCP
-	bool
-	depends on XILINX_ML300
-	default y
-
 config IBM_EMAC4
 	bool
 	depends on 440GX || 440SP || 440SPE
@@ -208,11 +207,21 @@ config 405GPR
 	depends on SYCAMORE
 	default y
 
-config VIRTEX_II_PRO
+config XILINX_VIRTEX_II_PRO
 	bool
 	depends on XILINX_ML300
 	default y
 
+config XILINX_VIRTEX_4_FX
+	bool
+	depends on XILINX_ML403
+	default y
+
+config XILINX_VIRTEX
+	bool
+	depends on XILINX_VIRTEX_II_PRO || XILINX_VIRTEX_4_FX
+	default y
+
 config STB03xxx
 	bool
 	depends on REDWOOD_5 || REDWOOD_6
@@ -220,7 +229,7 @@ config STB03xxx
 
 config EMBEDDEDBOOT
 	bool
-	depends on EP405 || XILINX_ML300
+	depends on EP405 || XILINX_ML300 || XILINX_ML403
 	default y
 
 config IBM_OPENBIOS
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index c9bb611..a04a0d0 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_REDWOOD_6)		+= redwood6.o
 obj-$(CONFIG_SYCAMORE)		+= sycamore.o
 obj-$(CONFIG_WALNUT)		+= walnut.o
 obj-$(CONFIG_XILINX_ML300)	+= xilinx_ml300.o
+obj-$(CONFIG_XILINX_ML403)	+= xilinx_ml403.o
 
 obj-$(CONFIG_405GP)		+= ibm405gp.o
 obj-$(CONFIG_REDWOOD_5)		+= ibmstb4.o
@@ -26,4 +27,5 @@ obj-$(CONFIG_440SP)		+= ibm440sp.o
 obj-$(CONFIG_440SPE)		+= ppc440spe.o
 obj-$(CONFIG_405EP)		+= ibm405ep.o
 obj-$(CONFIG_405GPR)		+= ibm405gpr.o
-obj-$(CONFIG_VIRTEX_II_PRO)	+= virtex-ii_pro.o
+obj-$(CONFIG_XILINX_VIRTEX)	+= virtex.o
+
diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.c b/arch/ppc/platforms/4xx/virtex-ii_pro.c
deleted file mode 100644
index 097cc9d5..0000000
--- a/arch/ppc/platforms/4xx/virtex-ii_pro.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/virtex-ii_pro.c
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <asm/ocp.h>
-#include "virtex-ii_pro.h"
-
-/* Have OCP take care of the serial ports. */
-struct ocp_def core_ocp[] = {
-#ifdef XPAR_UARTNS550_0_BASEADDR
-	{ .vendor	= OCP_VENDOR_XILINX,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= XPAR_UARTNS550_0_BASEADDR,
-	  .irq		= XPAR_INTC_0_UARTNS550_0_VEC_ID,
-	  .pm		= OCP_CPM_NA
-	},
-#ifdef XPAR_UARTNS550_1_BASEADDR
-	{ .vendor	= OCP_VENDOR_XILINX,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= XPAR_UARTNS550_1_BASEADDR,
-	  .irq		= XPAR_INTC_0_UARTNS550_1_VEC_ID,
-	  .pm		= OCP_CPM_NA
-	},
-#ifdef XPAR_UARTNS550_2_BASEADDR
-	{ .vendor	= OCP_VENDOR_XILINX,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= XPAR_UARTNS550_2_BASEADDR,
-	  .irq		= XPAR_INTC_0_UARTNS550_2_VEC_ID,
-	  .pm		= OCP_CPM_NA
-	},
-#ifdef XPAR_UARTNS550_3_BASEADDR
-	{ .vendor	= OCP_VENDOR_XILINX,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 3,
-	  .paddr	= XPAR_UARTNS550_3_BASEADDR,
-	  .irq		= XPAR_INTC_0_UARTNS550_3_VEC_ID,
-	  .pm		= OCP_CPM_NA
-	},
-#ifdef XPAR_UARTNS550_4_BASEADDR
-#error Edit this file to add more devices.
-#endif			/* 4 */
-#endif			/* 3 */
-#endif			/* 2 */
-#endif			/* 1 */
-#endif			/* 0 */
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.h b/arch/ppc/platforms/4xx/virtex-ii_pro.h
deleted file mode 100644
index 9014c48..0000000
--- a/arch/ppc/platforms/4xx/virtex-ii_pro.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/virtex-ii_pro.h
- *
- * Include file that defines the Xilinx Virtex-II Pro processor
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_VIRTEXIIPRO_H__
-#define __ASM_VIRTEXIIPRO_H__
-
-#include <linux/config.h>
-#include <asm/xparameters.h>
-
-/* serial defines */
-
-#define RS_TABLE_SIZE  4	/* change this and add more devices below
-				   if you have more then 4 16x50 UARTs */
-
-#define BASE_BAUD		(XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16)
-
-/* The serial ports in the Virtex-II Pro have each I/O byte in the
- * LSByte of a word.  This means that iomem_reg_shift needs to be 2 to
- * change the byte offsets into word offsets.  In addition the base
- * addresses need to have 3 added to them to get to the LSByte.
- */
-#define STD_UART_OP(num)						 \
-	{ 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID,	 \
-		ASYNC_BOOT_AUTOCONF,		 			 \
-		.iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \
-		.iomem_reg_shift = 2,					 \
-		.io_type = SERIAL_IO_MEM},
-
-#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define ML300_UART0 STD_UART_OP(0)
-#else
-#define ML300_UART0
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define ML300_UART1 STD_UART_OP(1)
-#else
-#define ML300_UART1
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define ML300_UART2 STD_UART_OP(2)
-#else
-#define ML300_UART2
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define ML300_UART3 STD_UART_OP(3)
-#else
-#define ML300_UART3
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID)
-#error Edit this file to add more devices.
-#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define NR_SER_PORTS	4
-#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define NR_SER_PORTS	3
-#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define NR_SER_PORTS	2
-#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define NR_SER_PORTS	1
-#else
-#define NR_SER_PORTS	0
-#endif
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_PORT_DFNS	\
-	ML300_UART0		\
-	ML300_UART1		\
-	ML300_UART2		\
-	ML300_UART3
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_PORT_DFNS	\
-	ML300_UART1		\
-	ML300_UART0		\
-	ML300_UART2		\
-	ML300_UART3
-#endif
-
-#define DCRN_CPMFR_BASE	0
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_VIRTEXIIPRO_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c
new file mode 100644
index 0000000..133a831
--- /dev/null
+++ b/arch/ppc/platforms/4xx/virtex.c
@@ -0,0 +1,56 @@
+/*
+ * Virtex-II Pro & Virtex-4 FX common infrastructure
+ *
+ * Maintainer: Grant Likely <grant.likely@secretlab.ca>
+ *
+ * Copyright 2005 Secret Lab Technologies Ltd.
+ * Copyright 2005 General Dynamics Canada Ltd.
+ * Copyright 2005 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/serial_8250.h>
+#include <asm/ppc_sys.h>
+#include <platforms/4xx/virtex.h>
+#include <platforms/4xx/xparameters/xparameters.h>
+
+#define XPAR_UART(num) { \
+		.mapbase  = XPAR_UARTNS550_##num##_BASEADDR + 3, \
+		.irq	  = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
+		.iotype	  = UPIO_MEM, \
+		.uartclk  = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \
+		.flags	  = UPF_BOOT_AUTOCONF, \
+		.regshift = 2, \
+	}
+
+struct plat_serial8250_port serial_platform_data[] = {
+#ifdef XPAR_UARTNS550_0_BASEADDR
+	XPAR_UART(0),
+#endif
+#ifdef XPAR_UARTNS550_1_BASEADDR
+	XPAR_UART(1),
+#endif
+#ifdef XPAR_UARTNS550_2_BASEADDR
+	XPAR_UART(2),
+#endif
+#ifdef XPAR_UARTNS550_3_BASEADDR
+	XPAR_UART(3),
+#endif
+	{ }, /* terminated by empty record */
+};
+
+struct platform_device ppc_sys_platform_devices[] = {
+	[VIRTEX_UART] = {
+		.name		= "serial8250",
+		.id		= 0,
+		.dev.platform_data = serial_platform_data,
+	},
+};
+
diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h
new file mode 100644
index 0000000..1a01b81
--- /dev/null
+++ b/arch/ppc/platforms/4xx/virtex.h
@@ -0,0 +1,35 @@
+/*
+ * arch/ppc/platforms/4xx/virtex.h
+ *
+ * Include file that defines the Xilinx Virtex-II Pro processor
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2.  This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_VIRTEX_H__
+#define __ASM_VIRTEX_H__
+
+/* serial defines */
+
+#include <asm/ibm405.h>
+
+/* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */
+#if !defined(BASE_BAUD)
+ #define BASE_BAUD		(0) /* dummy value; not used */
+#endif
+  
+/* Device type enumeration for platform bus definitions */
+#ifndef __ASSEMBLY__
+enum ppc_sys_devices {
+	VIRTEX_UART,
+};
+#endif
+  
+#endif				/* __ASM_VIRTEX_H__ */
+#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
index 0b1b77d..267afb5 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml300.c
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.c
@@ -17,12 +17,14 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/serialP.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
-#include <asm/ocp.h>
+#include <asm/ppc_sys.h>
 
-#include <platforms/4xx/virtex-ii_pro.h>	/* for NR_SER_PORTS */
+#include <syslib/gen550.h>
+#include <platforms/4xx/xparameters/xparameters.h>
 
 /*
  * As an overview of how the following functions (platform_init,
@@ -54,6 +56,22 @@
  *          ppc4xx_pic_init			arch/ppc/syslib/xilinx_pic.c
  */
 
+/* Board specifications structures */
+struct ppc_sys_spec *cur_ppc_sys_spec;
+struct ppc_sys_spec ppc_sys_specs[] = {
+	{
+		/* Only one entry, always assume the same design */
+		.ppc_sys_name	= "Xilinx ML300 Reference Design",
+		.mask 		= 0x00000000,
+		.value 		= 0x00000000,
+		.num_devices	= 1,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			VIRTEX_UART,
+		},
+	},
+};
+
 #if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
 
 static volatile unsigned *powerdown_base =
@@ -80,28 +98,39 @@ ml300_map_io(void)
 #endif
 }
 
+/* Early serial support functions */
 static void __init
+ml300_early_serial_init(int num, struct plat_serial8250_port *pdata)
+{
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	struct uart_port serial_req;
+
+	memset(&serial_req, 0, sizeof(serial_req));
+	serial_req.mapbase	= pdata->mapbase;
+	serial_req.membase	= pdata->membase;
+	serial_req.irq		= pdata->irq;
+	serial_req.uartclk	= pdata->uartclk;
+	serial_req.regshift	= pdata->regshift;
+	serial_req.iotype	= pdata->iotype;
+	serial_req.flags	= pdata->flags;
+	gen550_init(num, &serial_req);
+#endif
+}
+
+void __init
 ml300_early_serial_map(void)
 {
 #ifdef CONFIG_SERIAL_8250
-	struct serial_state old_ports[] = { SERIAL_PORT_DFNS };
-	struct uart_port port;
-	int i;
-
-	/* Setup ioremapped serial port access */
-	for (i = 0; i < ARRAY_SIZE(old_ports); i++ ) {
-		memset(&port, 0, sizeof(port));
-		port.membase = ioremap((phys_addr_t)(old_ports[i].iomem_base), 16);
-		port.irq = old_ports[i].irq;
-		port.uartclk = old_ports[i].baud_base * 16;
-		port.regshift = old_ports[i].iomem_reg_shift;
-		port.iotype = SERIAL_IO_MEM;
-		port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
-		port.line = i;
-
-		if (early_serial_setup(&port) != 0) {
-			printk("Early serial init of port %d failed\n", i);
-		}
+	struct plat_serial8250_port *pdata;
+	int i = 0;
+
+	pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART);
+	while(pdata && pdata->flags)
+	{
+		pdata->membase = ioremap(pdata->mapbase, 0x100);
+		ml300_early_serial_init(i, pdata);
+		pdata++;
+		i++;
 	}
 #endif /* CONFIG_SERIAL_8250 */
 }
@@ -109,9 +138,8 @@ ml300_early_serial_map(void)
 void __init
 ml300_setup_arch(void)
 {
-	ppc4xx_setup_arch();	/* calls ppc4xx_find_bridges() */
-
 	ml300_early_serial_map();
+	ppc4xx_setup_arch();	/* calls ppc4xx_find_bridges() */
 
 	/* Identify the system */
 	printk(KERN_INFO "Xilinx Virtex-II Pro port\n");
@@ -131,6 +159,8 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 {
 	ppc4xx_init(r3, r4, r5, r6, r7);
 
+	identify_ppc_sys_by_id(mfspr(SPRN_PVR));
+
 	ppc_md.setup_arch = ml300_setup_arch;
 	ppc_md.setup_io_mappings = ml300_map_io;
 	ppc_md.init_IRQ = ml300_init_irq;
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.h b/arch/ppc/platforms/4xx/xilinx_ml300.h
index f8c5884..ae8bf13 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml300.h
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.h
@@ -16,7 +16,7 @@
 #define __ASM_XILINX_ML300_H__
 
 /* ML300 has a Xilinx Virtex-II Pro processor */
-#include <platforms/4xx/virtex-ii_pro.h>
+#include <platforms/4xx/virtex.h>
 
 #ifndef __ASSEMBLY__
 
@@ -41,7 +41,7 @@ typedef struct board_info {
 #define PPC4xx_ONB_IO_VADDR	0u
 #define PPC4xx_ONB_IO_SIZE	0u
 
-#define PPC4xx_MACHINE_NAME "Xilinx ML300"
+#define PPC4xx_MACHINE_NAME "Xilinx ML300 Reference System"
 
 #endif /* __ASM_XILINX_ML300_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.c b/arch/ppc/platforms/4xx/xilinx_ml403.c
new file mode 100644
index 0000000..4c0c7e4
--- /dev/null
+++ b/arch/ppc/platforms/4xx/xilinx_ml403.c
@@ -0,0 +1,177 @@
+/*
+ * arch/ppc/platforms/4xx/xilinx_ml403.c
+ *
+ * Xilinx ML403 evaluation board initialization
+ *
+ * Author: Grant Likely <grant.likely@secretlab.ca>
+ *
+ * 2005 (c) Secret Lab Technologies Ltd.
+ * 2002-2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/serialP.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ppc_sys.h>
+
+#include <syslib/gen550.h>
+#include <platforms/4xx/xparameters/xparameters.h>
+
+/*
+ * As an overview of how the following functions (platform_init,
+ * ml403_map_io, ml403_setup_arch and ml403_init_IRQ) fit into the
+ * kernel startup procedure, here's a call tree:
+ *
+ * start_here					arch/ppc/kernel/head_4xx.S
+ *  early_init					arch/ppc/kernel/setup.c
+ *  machine_init				arch/ppc/kernel/setup.c
+ *    platform_init				this file
+ *      ppc4xx_init				arch/ppc/syslib/ppc4xx_setup.c
+ *        parse_bootinfo
+ *          find_bootinfo
+ *        "setup some default ppc_md pointers"
+ *  MMU_init					arch/ppc/mm/init.c
+ *    *ppc_md.setup_io_mappings == ml403_map_io	this file
+ *      ppc4xx_map_io				arch/ppc/syslib/ppc4xx_setup.c
+ *  start_kernel				init/main.c
+ *    setup_arch				arch/ppc/kernel/setup.c
+ * #if defined(CONFIG_KGDB)
+ *      *ppc_md.kgdb_map_scc() == gen550_kgdb_map_scc
+ * #endif
+ *      *ppc_md.setup_arch == ml403_setup_arch	this file
+ *        ppc4xx_setup_arch			arch/ppc/syslib/ppc4xx_setup.c
+ *          ppc4xx_find_bridges			arch/ppc/syslib/ppc405_pci.c
+ *    init_IRQ					arch/ppc/kernel/irq.c
+ *      *ppc_md.init_IRQ == ml403_init_IRQ	this file
+ *        ppc4xx_init_IRQ			arch/ppc/syslib/ppc4xx_setup.c
+ *          ppc4xx_pic_init			arch/ppc/syslib/xilinx_pic.c
+ */
+
+/* Board specifications structures */
+struct ppc_sys_spec *cur_ppc_sys_spec;
+struct ppc_sys_spec ppc_sys_specs[] = {
+	{
+		/* Only one entry, always assume the same design */
+		.ppc_sys_name	= "Xilinx ML403 Reference Design",
+		.mask 		= 0x00000000,
+		.value 		= 0x00000000,
+		.num_devices	= 1,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			VIRTEX_UART,
+		},
+	},
+};
+
+#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
+
+static volatile unsigned *powerdown_base =
+    (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR;
+
+static void
+xilinx_power_off(void)
+{
+	local_irq_disable();
+	out_be32(powerdown_base, XPAR_POWER_0_POWERDOWN_VALUE);
+	while (1) ;
+}
+#endif
+
+void __init
+ml403_map_io(void)
+{
+	ppc4xx_map_io();
+
+#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
+	powerdown_base = ioremap((unsigned long) powerdown_base,
+				 XPAR_POWER_0_POWERDOWN_HIGHADDR -
+				 XPAR_POWER_0_POWERDOWN_BASEADDR + 1);
+#endif
+}
+
+/* Early serial support functions */
+static void __init
+ml403_early_serial_init(int num, struct plat_serial8250_port *pdata)
+{
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+	struct uart_port serial_req;
+
+	memset(&serial_req, 0, sizeof(serial_req));
+	serial_req.mapbase	= pdata->mapbase;
+	serial_req.membase	= pdata->membase;
+	serial_req.irq		= pdata->irq;
+	serial_req.uartclk	= pdata->uartclk;
+	serial_req.regshift	= pdata->regshift;
+	serial_req.iotype	= pdata->iotype;
+	serial_req.flags	= pdata->flags;
+	gen550_init(num, &serial_req);
+#endif
+}
+
+void __init
+ml403_early_serial_map(void)
+{
+#ifdef CONFIG_SERIAL_8250
+	struct plat_serial8250_port *pdata;
+	int i = 0;
+
+	pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART);
+	while(pdata && pdata->flags)
+	{
+		pdata->membase = ioremap(pdata->mapbase, 0x100);
+		ml403_early_serial_init(i, pdata);
+		pdata++;
+		i++;
+	}
+#endif /* CONFIG_SERIAL_8250 */
+}
+
+void __init
+ml403_setup_arch(void)
+{
+	ml403_early_serial_map();
+	ppc4xx_setup_arch();	/* calls ppc4xx_find_bridges() */
+
+	/* Identify the system */
+	printk(KERN_INFO "Xilinx ML403 Reference System (Virtex-4 FX)\n");
+}
+
+/* Called after board_setup_irq from ppc4xx_init_IRQ(). */
+void __init
+ml403_init_irq(void)
+{
+	ppc4xx_init_IRQ();
+}
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	      unsigned long r6, unsigned long r7)
+{
+	ppc4xx_init(r3, r4, r5, r6, r7);
+
+	identify_ppc_sys_by_id(mfspr(SPRN_PVR));
+
+	ppc_md.setup_arch = ml403_setup_arch;
+	ppc_md.setup_io_mappings = ml403_map_io;
+	ppc_md.init_IRQ = ml403_init_irq;
+
+#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
+	ppc_md.power_off = xilinx_power_off;
+#endif
+
+#ifdef CONFIG_KGDB
+	ppc_md.early_serial_map = ml403_early_serial_map;
+#endif
+}
+
diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.h b/arch/ppc/platforms/4xx/xilinx_ml403.h
new file mode 100644
index 0000000..4735969
--- /dev/null
+++ b/arch/ppc/platforms/4xx/xilinx_ml403.h
@@ -0,0 +1,49 @@
+/*
+ * arch/ppc/platforms/4xx/xilinx_ml403.h
+ *
+ * Include file that defines the Xilinx ML403 reference design
+ *
+ * Author: Grant Likely <grant.likely@secretlab.ca>
+ *
+ * 2005 (c) Secret Lab Technologies Ltd.
+ * 2002-2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_XILINX_ML403_H__
+#define __ASM_XILINX_ML403_H__
+
+/* ML403 has a Xilinx Virtex-4 FPGA with a PPC405 hard core */
+#include <platforms/4xx/virtex.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+typedef struct board_info {
+	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */
+	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */
+	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */
+	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */
+	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */
+} bd_t;
+
+/* Some 4xx parts use a different timebase frequency from the internal clock.
+*/
+#define bi_tbfreq bi_intfreq
+
+#endif /* !__ASSEMBLY__ */
+
+/* We don't need anything mapped.  Size of zero will accomplish that. */
+#define PPC4xx_ONB_IO_PADDR	0u
+#define PPC4xx_ONB_IO_VADDR	0u
+#define PPC4xx_ONB_IO_SIZE	0u
+
+#define PPC4xx_MACHINE_NAME "Xilinx ML403 Reference Design"
+
+#endif /* __ASM_XILINX_ML403_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h
new file mode 100644
index 0000000..4cf21f2
--- /dev/null
+++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-ppc/xparameters.h
+ *
+ * This file includes the correct xparameters.h for the CONFIG'ed board plus
+ * fixups to translate board specific XPAR values to a common set of names
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * 2004 (c) MontaVista Software, Inc.  This file is licensed under the terms
+ * of the GNU General Public License version 2.  This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+
+#if defined(CONFIG_XILINX_ML300)
+  #include "xparameters_ml300.h"
+#elif defined(CONFIG_XILINX_ML403)
+  #include "xparameters_ml403.h"
+#else
+  /* Add other board xparameter includes here before the #else */
+  #error No xparameters_*.h file included
+#endif
+
+#ifndef SERIAL_PORT_DFNS
+  /* zImage serial port definitions */
+  #define RS_TABLE_SIZE 1
+  #define SERIAL_PORT_DFNS {						\
+	.baud_base	 = XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16,		\
+	.irq		 = XPAR_INTC_0_UARTNS550_0_VEC_ID,		\
+	.flags		 = ASYNC_BOOT_AUTOCONF,				\
+	.iomem_base	 = (u8 *)XPAR_UARTNS550_0_BASEADDR + 3,		\
+	.iomem_reg_shift = 2,						\
+	.io_type	 = SERIAL_IO_MEM,				\
+  },
+#endif
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h b/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
new file mode 100644
index 0000000..5cacdcb
--- /dev/null
+++ b/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
@@ -0,0 +1,243 @@
+
+/*******************************************************************
+*
+* CAUTION: This file is automatically generated by libgen.
+* Version: Xilinx EDK 7.1.2 EDK_H.12.5.1
+* DO NOT EDIT.
+*
+* Copyright (c) 2005 Xilinx, Inc.  All rights reserved. 
+* 
+* Description: Driver parameters
+*
+*******************************************************************/
+
+#define XPAR_PLB_BRAM_IF_CNTLR_0_BASEADDR 0xFFFF0000
+#define XPAR_PLB_BRAM_IF_CNTLR_0_HIGHADDR 0xFFFFFFFF
+
+/******************************************************************/
+
+#define XPAR_OPB_EMC_0_MEM0_BASEADDR 0x20000000
+#define XPAR_OPB_EMC_0_MEM0_HIGHADDR 0x200FFFFF
+#define XPAR_OPB_EMC_0_MEM1_BASEADDR 0x28000000
+#define XPAR_OPB_EMC_0_MEM1_HIGHADDR 0x287FFFFF
+#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
+#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
+#define XPAR_OPB_EMC_USB_0_MEM0_BASEADDR 0xA5000000
+#define XPAR_OPB_EMC_USB_0_MEM0_HIGHADDR 0xA50000FF
+#define XPAR_PLB_DDR_0_MEM0_BASEADDR 0x00000000
+#define XPAR_PLB_DDR_0_MEM0_HIGHADDR 0x0FFFFFFF
+
+/******************************************************************/
+
+#define XPAR_XEMAC_NUM_INSTANCES 1
+#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
+#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
+#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
+#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
+#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
+
+/******************************************************************/
+
+#define XPAR_XUARTNS550_NUM_INSTANCES 1
+#define XPAR_XUARTNS550_CLOCK_HZ 100000000
+#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
+#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
+#define XPAR_OPB_UART16550_0_DEVICE_ID 0
+
+/******************************************************************/
+
+#define XPAR_XGPIO_NUM_INSTANCES 3
+#define XPAR_OPB_GPIO_0_BASEADDR 0x90000000
+#define XPAR_OPB_GPIO_0_HIGHADDR 0x900001FF
+#define XPAR_OPB_GPIO_0_DEVICE_ID 0
+#define XPAR_OPB_GPIO_0_INTERRUPT_PRESENT 0
+#define XPAR_OPB_GPIO_0_IS_DUAL 1
+#define XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR 0x90001000
+#define XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR 0x900011FF
+#define XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID 1
+#define XPAR_OPB_GPIO_EXP_HDR_0_INTERRUPT_PRESENT 0
+#define XPAR_OPB_GPIO_EXP_HDR_0_IS_DUAL 1
+#define XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR 0x90002000
+#define XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR 0x900021FF
+#define XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID 2
+#define XPAR_OPB_GPIO_CHAR_LCD_0_INTERRUPT_PRESENT 0
+#define XPAR_OPB_GPIO_CHAR_LCD_0_IS_DUAL 0
+
+/******************************************************************/
+
+#define XPAR_XPS2_NUM_INSTANCES 2
+#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
+#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
+#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
+#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
+#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
+#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
+
+/******************************************************************/
+
+#define XPAR_XIIC_NUM_INSTANCES 1
+#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
+#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
+#define XPAR_OPB_IIC_0_DEVICE_ID 0
+#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
+#define XPAR_OPB_IIC_0_GPO_WIDTH 1
+
+/******************************************************************/
+
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS 10
+#define XPAR_XINTC_HAS_IPR 1
+#define XPAR_XINTC_USE_DCR 0
+#define XPAR_XINTC_NUM_INSTANCES 1
+#define XPAR_OPB_INTC_0_BASEADDR 0xD1000FC0
+#define XPAR_OPB_INTC_0_HIGHADDR 0xD1000FDF
+#define XPAR_OPB_INTC_0_DEVICE_ID 0
+#define XPAR_OPB_INTC_0_KIND_OF_INTR 0x00000000
+
+/******************************************************************/
+
+#define XPAR_INTC_SINGLE_BASEADDR 0xD1000FC0
+#define XPAR_INTC_SINGLE_HIGHADDR 0xD1000FDF
+#define XPAR_INTC_SINGLE_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID
+#define XPAR_OPB_ETHERNET_0_IP2INTC_IRPT_MASK 0X000001
+#define XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 0
+#define XPAR_SYSTEM_USB_HPI_INT_MASK 0X000002
+#define XPAR_OPB_INTC_0_SYSTEM_USB_HPI_INT_INTR 1
+#define XPAR_MISC_LOGIC_0_PHY_MII_INT_MASK 0X000004
+#define XPAR_OPB_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 2
+#define XPAR_OPB_SYSACE_0_SYSACE_IRQ_MASK 0X000008
+#define XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 3
+#define XPAR_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_MASK 0X000010
+#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 4
+#define XPAR_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_MASK 0X000020
+#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 5
+#define XPAR_OPB_IIC_0_IP2INTC_IRPT_MASK 0X000040
+#define XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 6
+#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR2_MASK 0X000080
+#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 7
+#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR1_MASK 0X000100
+#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
+#define XPAR_OPB_UART16550_0_IP2INTC_IRPT_MASK 0X000200
+#define XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 9
+
+/******************************************************************/
+
+#define XPAR_XTFT_NUM_INSTANCES 1
+#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
+#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
+#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
+
+/******************************************************************/
+
+#define XPAR_XSYSACE_MEM_WIDTH 16
+#define XPAR_XSYSACE_NUM_INSTANCES 1
+#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
+#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
+#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
+#define XPAR_OPB_SYSACE_0_MEM_WIDTH 16
+
+/******************************************************************/
+
+#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
+
+/******************************************************************/
+
+
+/******************************************************************/
+
+/* Linux Redefines */
+
+/******************************************************************/
+
+#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
+#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
+#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
+#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_INTC_0_BASEADDR XPAR_OPB_INTC_0_BASEADDR
+#define XPAR_INTC_0_HIGHADDR XPAR_OPB_INTC_0_HIGHADDR
+#define XPAR_INTC_0_KIND_OF_INTR XPAR_OPB_INTC_0_KIND_OF_INTR
+#define XPAR_INTC_0_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_INTC_0_EMAC_0_VEC_ID XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR
+#define XPAR_INTC_0_SYSACE_0_VEC_ID XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR
+#define XPAR_INTC_0_IIC_0_VEC_ID XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR
+#define XPAR_INTC_0_PS2_1_VEC_ID XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR
+#define XPAR_INTC_0_PS2_0_VEC_ID XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR
+#define XPAR_INTC_0_UARTNS550_0_VEC_ID XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR
+
+/******************************************************************/
+
+#define XPAR_TFT_0_BASEADDR XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR
+
+/******************************************************************/
+
+#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
+#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
+#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
+#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
+#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
+#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_GPIO_0_BASEADDR XPAR_OPB_GPIO_0_BASEADDR_0
+#define XPAR_GPIO_0_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR_0
+#define XPAR_GPIO_0_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID_0
+#define XPAR_GPIO_1_BASEADDR XPAR_OPB_GPIO_0_BASEADDR_1
+#define XPAR_GPIO_1_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR_1
+#define XPAR_GPIO_1_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID_1
+#define XPAR_GPIO_2_BASEADDR XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR_0
+#define XPAR_GPIO_2_HIGHADDR XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR_0
+#define XPAR_GPIO_2_DEVICE_ID XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID_0
+#define XPAR_GPIO_3_BASEADDR XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR_1
+#define XPAR_GPIO_3_HIGHADDR XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR_1
+#define XPAR_GPIO_3_DEVICE_ID XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID_1
+#define XPAR_GPIO_4_BASEADDR XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR
+#define XPAR_GPIO_4_HIGHADDR XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR
+#define XPAR_GPIO_4_DEVICE_ID XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_PS2_0_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0
+#define XPAR_PS2_0_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0
+#define XPAR_PS2_0_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0
+#define XPAR_PS2_1_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1
+#define XPAR_PS2_1_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1
+#define XPAR_PS2_1_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1
+
+/******************************************************************/
+
+#define XPAR_SYSACE_0_BASEADDR XPAR_OPB_SYSACE_0_BASEADDR
+#define XPAR_SYSACE_0_HIGHADDR XPAR_OPB_SYSACE_0_HIGHADDR
+#define XPAR_SYSACE_0_DEVICE_ID XPAR_OPB_SYSACE_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
+#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
+#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
+#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
+#define XPAR_DDR_0_SIZE 0x4000000
+
+/******************************************************************/
+
+#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
+#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
+#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
+
+/******************************************************************/
+
+#define XPAR_PCI_0_CLOCK_FREQ_HZ    0
+
+/******************************************************************/
+
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
index 51430e2..e8b91a3 100644
--- a/arch/ppc/platforms/Makefile
+++ b/arch/ppc/platforms/Makefile
@@ -37,6 +37,9 @@ obj-$(CONFIG_SBC82xx)		+= sbc82xx.o
 obj-$(CONFIG_SPRUCE)		+= spruce.o
 obj-$(CONFIG_LITE5200)		+= lite5200.o
 obj-$(CONFIG_EV64360)		+= ev64360.o
+obj-$(CONFIG_MPC86XADS)		+= mpc866ads_setup.o
+obj-$(CONFIG_MPC885ADS)		+= mpc885ads_setup.o
+obj-$(CONFIG_ADS8272)		+= mpc8272ads_setup.o
 
 ifeq ($(CONFIG_SMP),y)
 obj-$(CONFIG_PPC_CHRP)		+= chrp_smp.o
diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h
index a48fb8d..e1c0b1b 100644
--- a/arch/ppc/platforms/fads.h
+++ b/arch/ppc/platforms/fads.h
@@ -112,7 +112,7 @@
 
 /* CPM Ethernet through SCC1 or SCC2 */
 
-#ifdef CONFIG_SCC1_ENET		/* Probably 860 variant */
+#if defined(CONFIG_SCC1_ENET) || defined(CONFIG_MPC8xx_SECOND_ETH_SCC1)		/* Probably 860 variant */
 /* Bits in parallel I/O port registers that have to be set/cleared
  * to configure the pins for SCC1 use.
  * TCLK - CLK1, RCLK - CLK2.
diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c
new file mode 100644
index 0000000..bc9b94f
--- /dev/null
+++ b/arch/ppc/platforms/mpc8272ads_setup.c
@@ -0,0 +1,236 @@
+/*
+ * arch/ppc/platforms/82xx/pq2ads_pd.c
+ *
+ * MPC82xx Board-specific PlatformDevice descriptions
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/fs_enet_pd.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/mpc8260.h>
+#include <asm/cpm2.h>
+#include <asm/immap_cpm2.h>
+#include <asm/irq.h>
+#include <asm/ppc_sys.h>
+#include <asm/ppcboot.h>
+
+#include "pq2ads_pd.h"
+
+static void init_fcc1_ioports(void);
+static void init_fcc2_ioports(void);
+
+static struct fs_mii_bus_info mii_bus_info = {
+	.method                 = fsmii_bitbang,
+	.id                     = 0,
+	.i.bitbang = {
+		.mdio_port	= fsiop_portc,
+		.mdio_bit	= 18,
+		.mdc_port	= fsiop_portc,
+		.mdc_bit	= 19,
+		.delay		= 1,
+	},
+};
+
+static struct fs_platform_info mpc82xx_fcc1_pdata = {
+	.fs_no		= fsid_fcc1,
+	.cp_page	= CPM_CR_FCC1_PAGE,
+	.cp_block 	= CPM_CR_FCC1_SBLOCK,
+	.clk_trx 	= (PC_F1RXCLK | PC_F1TXCLK),
+	.clk_route	= CMX1_CLK_ROUTE,
+	.clk_mask	= CMX1_CLK_MASK,
+	.init_ioports 	= init_fcc1_ioports,
+
+	.phy_addr	= 0,
+#ifdef PHY_INTERRUPT
+	.phy_irq	= PHY_INTERRUPT,
+#else
+	.phy_irq	= -1;
+#endif
+	.mem_offset	= FCC1_MEM_OFFSET,
+	.bus_info	= &mii_bus_info,
+	.rx_ring	= 32,
+	.tx_ring	= 32,
+	.rx_copybreak	= 240,
+	.use_napi	= 0,
+	.napi_weight	= 17,
+};
+
+static struct fs_platform_info mpc82xx_fcc2_pdata = {
+	.fs_no		= fsid_fcc2,
+	.cp_page	= CPM_CR_FCC2_PAGE,
+	.cp_block 	= CPM_CR_FCC2_SBLOCK,
+	.clk_trx 	= (PC_F2RXCLK | PC_F2TXCLK),
+	.clk_route	= CMX2_CLK_ROUTE,
+	.clk_mask	= CMX2_CLK_MASK,
+	.init_ioports	= init_fcc2_ioports,
+
+	.phy_addr	= 3,
+#ifdef PHY_INTERRUPT
+	.phy_irq	= PHY_INTERRUPT,
+#else
+	.phy_irq	= -1;
+#endif
+	.mem_offset	= FCC2_MEM_OFFSET,
+	.bus_info	= &mii_bus_info,
+	.rx_ring	= 32,
+	.tx_ring	= 32,
+	.rx_copybreak	= 240,
+	.use_napi	= 0,
+	.napi_weight	= 17,
+};
+
+static void init_fcc1_ioports(void)
+{
+	struct io_port *io;
+	u32 tempval;
+	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
+	u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
+
+	io = &immap->im_ioport;
+
+	/* Enable the PHY */
+	clrbits32(bcsr, BCSR1_FETHIEN);
+	setbits32(bcsr, BCSR1_FETH_RST);
+
+	/* FCC1 pins are on port A/C. */
+	/* Configure port A and C pins for FCC1 Ethernet. */
+
+	tempval = in_be32(&io->iop_pdira);
+	tempval &= ~PA1_DIRA0;
+	tempval |= PA1_DIRA1;
+	out_be32(&io->iop_pdira, tempval);
+
+	tempval = in_be32(&io->iop_psora);
+	tempval &= ~PA1_PSORA0;
+	tempval |= PA1_PSORA1;
+	out_be32(&io->iop_psora, tempval);
+
+	setbits32(&io->iop_ppara,PA1_DIRA0 | PA1_DIRA1);
+
+	/* Alter clocks */
+	tempval = PC_F1TXCLK|PC_F1RXCLK;
+
+	clrbits32(&io->iop_psorc, tempval);
+	clrbits32(&io->iop_pdirc, tempval);
+	setbits32(&io->iop_pparc, tempval);
+
+	clrbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_MASK);
+	setbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_ROUTE);
+	iounmap(bcsr);
+	iounmap(immap);
+}
+
+static void init_fcc2_ioports(void)
+{
+	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
+	u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32));
+
+	struct io_port *io;
+	u32 tempval;
+
+	immap = cpm2_immr;
+
+	io = &immap->im_ioport;
+
+	/* Enable the PHY */
+	clrbits32(bcsr, BCSR3_FETHIEN2);
+	setbits32(bcsr, BCSR3_FETH2_RST);
+
+	/* FCC2 are port B/C. */
+	/* Configure port A and C pins for FCC2 Ethernet. */
+
+	tempval = in_be32(&io->iop_pdirb);
+	tempval &= ~PB2_DIRB0;
+	tempval |= PB2_DIRB1;
+	out_be32(&io->iop_pdirb, tempval);
+
+	tempval = in_be32(&io->iop_psorb);
+	tempval &= ~PB2_PSORB0;
+	tempval |= PB2_PSORB1;
+	out_be32(&io->iop_psorb, tempval);
+
+	setbits32(&io->iop_pparb,PB2_DIRB0 | PB2_DIRB1);
+
+	tempval = PC_F2RXCLK|PC_F2TXCLK;
+
+	/* Alter clocks */
+	clrbits32(&io->iop_psorc,tempval);
+	clrbits32(&io->iop_pdirc,tempval);
+	setbits32(&io->iop_pparc,tempval);
+
+	clrbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_MASK);
+	setbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_ROUTE);
+
+	iounmap(bcsr);
+	iounmap(immap);
+}
+
+
+static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev,
+					      int idx)
+{
+	bd_t* bi = (void*)__res;
+	int fs_no = fsid_fcc1+pdev->id-1;
+
+	mpc82xx_fcc1_pdata.dpram_offset = mpc82xx_fcc2_pdata.dpram_offset = (u32)cpm2_immr->im_dprambase;
+	mpc82xx_fcc1_pdata.fcc_regs_c = mpc82xx_fcc2_pdata.fcc_regs_c = (u32)cpm2_immr->im_fcc_c;
+
+	switch(fs_no) {
+		case fsid_fcc1:
+			memcpy(&mpc82xx_fcc1_pdata.macaddr,bi->bi_enetaddr,6);
+			pdev->dev.platform_data = &mpc82xx_fcc1_pdata;
+		break;
+		case fsid_fcc2:
+			memcpy(&mpc82xx_fcc2_pdata.macaddr,bi->bi_enetaddr,6);
+			mpc82xx_fcc2_pdata.macaddr[5] ^= 1;
+			pdev->dev.platform_data = &mpc82xx_fcc2_pdata;
+		break;
+	}
+}
+
+static int mpc8272ads_platform_notify(struct device *dev)
+{
+	static const struct platform_notify_dev_map dev_map[] = {
+		{
+			.bus_id = "fsl-cpm-fcc",
+			.rtn = mpc8272ads_fixup_enet_pdata
+		},
+		{
+			.bus_id = NULL
+		}
+	};
+	platform_notify_map(dev_map,dev);
+
+	return 0;
+
+}
+
+int __init mpc8272ads_init(void)
+{
+	printk(KERN_NOTICE "mpc8272ads: Init\n");
+
+	platform_notify = mpc8272ads_platform_notify;
+
+	ppc_sys_device_initfunc();
+
+	ppc_sys_device_disable_all();
+	ppc_sys_device_enable(MPC82xx_CPM_FCC1);
+	ppc_sys_device_enable(MPC82xx_CPM_FCC2);
+
+	return 0;
+}
+
+arch_initcall(mpc8272ads_init);
diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c
new file mode 100644
index 0000000..ac8fcc6
--- /dev/null
+++ b/arch/ppc/platforms/mpc866ads_setup.c
@@ -0,0 +1,273 @@
+/*arch/ppc/platforms/mpc885ads-setup.c
+ *
+ * Platform setup for the Freescale mpc885ads board
+ *
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+
+#include <linux/fs_enet_pd.h>
+#include <linux/mii.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/ppcboot.h>
+#include <asm/8xx_immap.h>
+#include <asm/commproc.h>
+#include <asm/ppc_sys.h>
+#include <asm/mpc8xx.h>
+
+extern unsigned char __res[];
+
+static struct fs_mii_bus_info fec_mii_bus_info = {
+	.method = fsmii_fec,
+	.id = 0,
+};
+
+static struct fs_mii_bus_info scc_mii_bus_info = {
+	.method = fsmii_fixed,
+	.id = 0,
+	.i.fixed.speed = 10,
+	.i.fixed.duplex = 0,
+};
+
+static struct fs_platform_info mpc8xx_fec_pdata[] = {
+	{
+	 .rx_ring = 128,
+	 .tx_ring = 16,
+	 .rx_copybreak = 240,
+
+	 .use_napi = 1,
+	 .napi_weight = 17,
+
+	 .phy_addr = 15,
+	 .phy_irq = -1,
+
+	 .use_rmii = 0,
+
+	 .bus_info = &fec_mii_bus_info,
+	 }
+};
+
+static struct fs_platform_info mpc8xx_scc_pdata = {
+	.rx_ring = 64,
+	.tx_ring = 8,
+	.rx_copybreak = 240,
+
+	.use_napi = 1,
+	.napi_weight = 17,
+
+	.phy_addr = -1,
+	.phy_irq = -1,
+
+	.bus_info = &scc_mii_bus_info,
+};
+
+void __init board_init(void)
+{
+	volatile cpm8xx_t *cp = cpmp;
+	unsigned *bcsr_io;
+
+	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+	if (bcsr_io == NULL) {
+		printk(KERN_CRIT "Could not remap BCSR1\n");
+		return;
+	}
+#ifdef CONFIG_SERIAL_CPM_SMC1
+	cp->cp_simode &= ~(0xe0000000 >> 17);	/* brg1 */
+	clrbits32(bcsr_io,(0x80000000 >> 7));
+#else
+	setbits32(bcsr_io,(0x80000000 >> 7));
+
+	cp->cp_pbpar &= ~(0x000000c0);
+	cp->cp_pbdir |= 0x000000c0;
+	cp->cp_smc[0].smc_smcmr = 0;
+	cp->cp_smc[0].smc_smce = 0;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC2
+	cp->cp_simode &= ~(0xe0000000 >> 1);
+	cp->cp_simode |= (0x20000000 >> 1);	/* brg2 */
+	clrbits32(bcsr_io,(0x80000000 >> 13));
+#else
+	clrbits32(bcsr_io,(0x80000000 >> 13));
+	cp->cp_pbpar &= ~(0x00000c00);
+	cp->cp_pbdir |= 0x00000c00;
+	cp->cp_smc[1].smc_smcmr = 0;
+	cp->cp_smc[1].smc_smce = 0;
+#endif
+	iounmap(bcsr_io);
+}
+
+static void setup_fec1_ioports(void)
+{
+	immap_t *immap = (immap_t *) IMAP_ADDR;
+
+	setbits16(&immap->im_ioport.iop_pdpar, 0x1fff);
+	setbits16(&immap->im_ioport.iop_pddir, 0x1fff);
+}
+
+static void setup_scc1_ioports(void)
+{
+	immap_t *immap = (immap_t *) IMAP_ADDR;
+	unsigned *bcsr_io;
+
+	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+	if (bcsr_io == NULL) {
+		printk(KERN_CRIT "Could not remap BCSR1\n");
+		return;
+	}
+
+	/* Enable the PHY.
+	 */
+	clrbits32(bcsr_io,BCSR1_ETHEN);
+
+	/* Configure port A pins for Txd and Rxd.
+	 */
+	/* Disable receive and transmit in case EPPC-Bug started it.
+	 */
+	setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
+	clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);
+	clrbits16(&immap->im_ioport.iop_paodr, PA_ENET_TXD);
+
+	/* Configure port C pins to enable CLSN and RENA.
+	 */
+	clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
+	clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
+	setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
+	/* Configure port A for TCLK and RCLK.
+	 */
+	setbits16(&immap->im_ioport.iop_papar, PA_ENET_TCLK | PA_ENET_RCLK);
+	clrbits16(&immap->im_ioport.iop_padir, PA_ENET_TCLK | PA_ENET_RCLK);
+	clrbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA);
+	clrbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA);
+
+	/* Configure Serial Interface clock routing.
+	 * First, clear all SCC bits to zero, then set the ones we want.
+	 */
+	clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
+	setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);
+
+	/* In the original SCC enet driver the following code is placed at
+	the end of the initialization */
+	setbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA);
+	setbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA);
+
+}
+
+static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
+{
+	struct fs_platform_info *fpi = pdev->dev.platform_data;
+
+	volatile cpm8xx_t *cp;
+	bd_t *bd = (bd_t *) __res;
+	char *e;
+	int i;
+
+	/* Get pointer to Communication Processor */
+	cp = cpmp;
+	switch (fs_no) {
+	case fsid_fec1:
+		fpi = &mpc8xx_fec_pdata[0];
+		fpi->init_ioports = &setup_fec1_ioports;
+
+		break;
+	case fsid_scc1:
+		fpi = &mpc8xx_scc_pdata;
+		fpi->init_ioports = &setup_scc1_ioports;
+
+		break;
+	default:
+		printk(KERN_WARNING"Device %s is not supported!\n", pdev->name);
+		return;
+	}
+
+	pdev->dev.platform_data = fpi;
+	fpi->fs_no = fs_no;
+
+	e = (unsigned char *)&bd->bi_enetaddr;
+	for (i = 0; i < 6; i++)
+		fpi->macaddr[i] = *e++;
+
+	fpi->macaddr[5 - pdev->id]++;
+
+}
+
+static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev,
+					   int idx)
+{
+	/* This is for FEC devices only */
+	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
+		return;
+	mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
+}
+
+static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
+					   int idx)
+{
+	/* This is for SCC devices only */
+	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
+		return;
+
+	mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
+}
+
+static int mpc866ads_platform_notify(struct device *dev)
+{
+	static const struct platform_notify_dev_map dev_map[] = {
+		{
+			.bus_id = "fsl-cpm-fec",
+			.rtn = mpc866ads_fixup_fec_enet_pdata,
+		},
+		{
+			.bus_id = "fsl-cpm-scc",
+			.rtn = mpc866ads_fixup_scc_enet_pdata,
+		},
+		{
+			.bus_id = NULL
+		}
+	};
+
+	platform_notify_map(dev_map,dev);
+
+	return 0;
+}
+
+int __init mpc866ads_init(void)
+{
+	printk(KERN_NOTICE "mpc866ads: Init\n");
+
+	platform_notify = mpc866ads_platform_notify;
+
+	ppc_sys_device_initfunc();
+	ppc_sys_device_disable_all();
+
+#ifdef MPC8xx_SECOND_ETH_SCC1
+	ppc_sys_device_enable(MPC8xx_CPM_SCC1);
+#endif
+	ppc_sys_device_enable(MPC8xx_CPM_FEC1);
+
+	return 0;
+}
+
+arch_initcall(mpc866ads_init);
diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c
new file mode 100644
index 0000000..50a99e5
--- /dev/null
+++ b/arch/ppc/platforms/mpc885ads_setup.c
@@ -0,0 +1,389 @@
+/*arch/ppc/platforms/mpc885ads-setup.c
+ *
+ * Platform setup for the Freescale mpc885ads board
+ *
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+
+#include <linux/fs_enet_pd.h>
+#include <linux/mii.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/ppcboot.h>
+#include <asm/8xx_immap.h>
+#include <asm/commproc.h>
+#include <asm/ppc_sys.h>
+
+extern unsigned char __res[];
+
+static void __init mpc885ads_scc_phy_init(char);
+
+static struct fs_mii_bus_info fec_mii_bus_info = {
+	.method = fsmii_fec,
+	.id = 0,
+};
+
+static struct fs_mii_bus_info scc_mii_bus_info = {
+#ifdef CONFIG_SCC_ENET_8xx_FIXED
+	.method = fsmii_fixed,
+#else
+	.method = fsmii_fec,
+#endif
+
+	.id = 0,
+};
+
+static struct fs_platform_info mpc8xx_fec_pdata[] = {
+	{
+	 .rx_ring = 128,
+	 .tx_ring = 16,
+	 .rx_copybreak = 240,
+
+	 .use_napi = 1,
+	 .napi_weight = 17,
+
+	 .phy_addr = 0,
+	 .phy_irq = SIU_IRQ7,
+
+	 .bus_info = &fec_mii_bus_info,
+	 }, {
+	     .rx_ring = 128,
+	     .tx_ring = 16,
+	     .rx_copybreak = 240,
+
+	     .use_napi = 1,
+	     .napi_weight = 17,
+
+	     .phy_addr = 1,
+	     .phy_irq = SIU_IRQ7,
+
+	     .bus_info = &fec_mii_bus_info,
+	     }
+};
+
+static struct fs_platform_info mpc8xx_scc_pdata = {
+	.rx_ring = 64,
+	.tx_ring = 8,
+	.rx_copybreak = 240,
+
+	.use_napi = 1,
+	.napi_weight = 17,
+
+	.phy_addr = 2,
+#ifdef CONFIG_MPC8xx_SCC_ENET_FIXED
+	.phy_irq = -1,
+#else
+	.phy_irq = SIU_IRQ7,
+#endif
+
+	.bus_info = &scc_mii_bus_info,
+};
+
+void __init board_init(void)
+{
+	volatile cpm8xx_t *cp = cpmp;
+	unsigned int *bcsr_io;
+
+#ifdef CONFIG_FS_ENET
+	immap_t *immap = (immap_t *) IMAP_ADDR;
+#endif
+	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+	if (bcsr_io == NULL) {
+		printk(KERN_CRIT "Could not remap BCSR\n");
+		return;
+	}
+#ifdef CONFIG_SERIAL_CPM_SMC1
+	cp->cp_simode &= ~(0xe0000000 >> 17);	/* brg1 */
+	clrbits32(bcsr_io, BCSR1_RS232EN_1);
+#else
+	setbits32(bcsr_io,BCSR1_RS232EN_1);
+	cp->cp_smc[0].smc_smcmr = 0;
+	cp->cp_smc[0].smc_smce = 0;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC2
+	cp->cp_simode &= ~(0xe0000000 >> 1);
+	cp->cp_simode |= (0x20000000 >> 1);	/* brg2 */
+	clrbits32(bcsr_io,BCSR1_RS232EN_2);
+#else
+	setbits32(bcsr_io,BCSR1_RS232EN_2);
+	cp->cp_smc[1].smc_smcmr = 0;
+	cp->cp_smc[1].smc_smce = 0;
+#endif
+	iounmap(bcsr_io);
+
+#ifdef CONFIG_FS_ENET
+	/* use MDC for MII (common) */
+	setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
+	clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
+#endif
+}
+
+static void setup_fec1_ioports(void)
+{
+	immap_t *immap = (immap_t *) IMAP_ADDR;
+
+	/* configure FEC1 pins  */
+	setbits16(&immap->im_ioport.iop_papar, 0xf830);
+	setbits16(&immap->im_ioport.iop_padir, 0x0830);
+	clrbits16(&immap->im_ioport.iop_padir, 0xf000);
+	setbits32(&immap->im_cpm.cp_pbpar, 0x00001001);
+
+	clrbits32(&immap->im_cpm.cp_pbdir, 0x00001001);
+	setbits16(&immap->im_ioport.iop_pcpar, 0x000c);
+	clrbits16(&immap->im_ioport.iop_pcdir, 0x000c);
+	setbits32(&immap->im_cpm.cp_pepar, 0x00000003);
+
+	setbits32(&immap->im_cpm.cp_pedir, 0x00000003);
+	clrbits32(&immap->im_cpm.cp_peso, 0x00000003);
+	clrbits32(&immap->im_cpm.cp_cptr, 0x00000100);
+}
+
+static void setup_fec2_ioports(void)
+{
+	immap_t *immap = (immap_t *) IMAP_ADDR;
+
+	/* configure FEC2 pins */
+	setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc);
+	setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc);
+	setbits32(&immap->im_cpm.cp_peso, 0x00037800);
+	clrbits32(&immap->im_cpm.cp_peso, 0x000087fc);
+	clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
+}
+
+static void setup_scc3_ioports(void)
+{
+	immap_t *immap = (immap_t *) IMAP_ADDR;
+	unsigned *bcsr_io;
+
+	bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
+
+	if (bcsr_io == NULL) {
+		printk(KERN_CRIT "Could not remap BCSR\n");
+		return;
+	}
+
+	/* Enable the PHY.
+	 */
+	setbits32(bcsr_io+4, BCSR4_ETH10_RST);
+	/* Configure port A pins for Txd and Rxd.
+	 */
+	setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
+	clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);
+
+	/* Configure port C pins to enable CLSN and RENA.
+	 */
+	clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
+	clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
+	setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
+
+	/* Configure port E for TCLK and RCLK.
+	 */
+	setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK);
+	clrbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
+	clrbits32(&immap->im_cpm.cp_pedir,
+		  PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA);
+	clrbits32(&immap->im_cpm.cp_peso, PE_ENET_TCLK | PE_ENET_RCLK);
+	setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
+
+	/* Configure Serial Interface clock routing.
+	 * First, clear all SCC bits to zero, then set the ones we want.
+	 */
+	clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
+	setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);
+
+	/* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used.
+	 */
+	immap->im_cpm.cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+	/* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode
+	 * by H/W setting after reset. SCC ethernet controller support only half duplex.
+	 * This discrepancy of modes causes a lot of carrier lost errors.
+	 */
+
+	/* In the original SCC enet driver the following code is placed at
+	   the end of the initialization */
+	setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
+	clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA);
+	setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
+
+	setbits32(bcsr_io+1, BCSR1_ETHEN);
+	iounmap(bcsr_io);
+}
+
+static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
+{
+	struct fs_platform_info *fpi = pdev->dev.platform_data;
+
+	volatile cpm8xx_t *cp;
+	bd_t *bd = (bd_t *) __res;
+	char *e;
+	int i;
+
+	/* Get pointer to Communication Processor */
+	cp = cpmp;
+	switch (fs_no) {
+	case fsid_fec1:
+		fpi = &mpc8xx_fec_pdata[0];
+		fpi->init_ioports = &setup_fec1_ioports;
+		break;
+	case fsid_fec2:
+		fpi = &mpc8xx_fec_pdata[1];
+		fpi->init_ioports = &setup_fec2_ioports;
+		break;
+	case fsid_scc3:
+		fpi = &mpc8xx_scc_pdata;
+		fpi->init_ioports = &setup_scc3_ioports;
+		mpc885ads_scc_phy_init(fpi->phy_addr);
+		break;
+	default:
+    	        printk(KERN_WARNING"Device %s is not supported!\n", pdev->name);
+	        return;
+	}
+
+	pdev->dev.platform_data = fpi;
+	fpi->fs_no = fs_no;
+
+	e = (unsigned char *)&bd->bi_enetaddr;
+	for (i = 0; i < 6; i++)
+		fpi->macaddr[i] = *e++;
+
+	fpi->macaddr[5 - pdev->id]++;
+
+}
+
+static void mpc885ads_fixup_fec_enet_pdata(struct platform_device *pdev,
+					   int idx)
+{
+	/* This is for FEC devices only */
+	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
+		return;
+	mpc885ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
+}
+
+static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev,
+						  int idx)
+{
+	/* This is for SCC devices only */
+	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
+		return;
+
+	mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
+}
+
+/* SCC ethernet controller does not have MII management channel. FEC1 MII
+ * channel is used to communicate with the 10Mbit PHY.
+ */
+
+#define MII_ECNTRL_PINMUX        0x4
+#define FEC_ECNTRL_PINMUX        0x00000004
+#define FEC_RCNTRL_MII_MODE        0x00000004
+
+/* Make MII read/write commands.
+ */
+#define mk_mii_write(REG, VAL, PHY_ADDR)    (0x50020000 | (((REG) & 0x1f) << 18) | \
+                ((VAL) & 0xffff) | ((PHY_ADDR) << 23))
+
+static void mpc885ads_scc_phy_init(char phy_addr)
+{
+	volatile immap_t *immap;
+	volatile fec_t *fecp;
+	bd_t *bd;
+
+	bd = (bd_t *) __res;
+	immap = (immap_t *) IMAP_ADDR;	/* pointer to internal registers */
+	fecp = &(immap->im_cpm.cp_fec);
+
+	/* Enable MII pins of the FEC1
+	 */
+	setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
+	clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
+	/* Set MII speed to 2.5 MHz
+	 */
+	out_be32(&fecp->fec_mii_speed,
+		 ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1);
+
+	/* Enable FEC pin MUX
+	 */
+	setbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX);
+	setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
+
+	out_be32(&fecp->fec_mii_data,
+		 mk_mii_write(MII_BMCR, BMCR_ISOLATE, phy_addr));
+	udelay(100);
+	out_be32(&fecp->fec_mii_data,
+		 mk_mii_write(MII_ADVERTISE,
+			      ADVERTISE_10HALF | ADVERTISE_CSMA, phy_addr));
+	udelay(100);
+
+	/* Disable FEC MII settings
+	 */
+	clrbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX);
+	clrbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
+	out_be32(&fecp->fec_mii_speed, 0);
+}
+
+static int mpc885ads_platform_notify(struct device *dev)
+{
+
+	static const struct platform_notify_dev_map dev_map[] = {
+		{
+			.bus_id = "fsl-cpm-fec",
+			.rtn = mpc885ads_fixup_fec_enet_pdata,
+		},
+		{
+			.bus_id = "fsl-cpm-scc",
+			.rtn = mpc885ads_fixup_scc_enet_pdata,
+		},
+		{
+			.bus_id = NULL
+		}
+	};
+
+	platform_notify_map(dev_map,dev);
+
+}
+
+int __init mpc885ads_init(void)
+{
+	printk(KERN_NOTICE "mpc885ads: Init\n");
+
+	platform_notify = mpc885ads_platform_notify;
+
+	ppc_sys_device_initfunc();
+	ppc_sys_device_disable_all();
+
+	ppc_sys_device_enable(MPC8xx_CPM_FEC1);
+
+#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
+	ppc_sys_device_enable(MPC8xx_CPM_SCC1);
+
+#endif
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+	ppc_sys_device_enable(MPC8xx_CPM_FEC2);
+#endif
+
+	return 0;
+}
+
+arch_initcall(mpc885ads_init);
diff --git a/arch/ppc/platforms/pq2ads.h b/arch/ppc/platforms/pq2ads.h
index 067d9a5..6b26dd3 100644
--- a/arch/ppc/platforms/pq2ads.h
+++ b/arch/ppc/platforms/pq2ads.h
@@ -13,6 +13,10 @@
 
 #include <asm/ppcboot.h>
 
+#if defined(CONFIG_ADS8272)
+#define BOARD_CHIP_NAME "8272"
+#endif
+
 /* Memory map is configured by the PROM startup.
  * We just map a few things we need.  The CSR is actually 4 byte-wide
  * registers that can be accessed as 8-, 16-, or 32-bit values.
diff --git a/arch/ppc/platforms/pq2ads_pd.h b/arch/ppc/platforms/pq2ads_pd.h
new file mode 100644
index 0000000..8f14a43
--- /dev/null
+++ b/arch/ppc/platforms/pq2ads_pd.h
@@ -0,0 +1,114 @@
+#ifndef __PQ2ADS_PD_H
+#define __PQ2ADS_PD_H
+/*
+ * arch/ppc/platforms/82xx/pq2ads_pd.h
+ *
+ * Some defines for MPC82xx board-specific PlatformDevice descriptions
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/* FCC1 Clock Source Configuration.  These can be redefined in the board specific file.
+   Can only choose from CLK9-12 */
+
+#define F1_RXCLK	11
+#define F1_TXCLK	10
+
+/* FCC2 Clock Source Configuration.  These can be redefined in the board specific file.
+   Can only choose from CLK13-16 */
+#define F2_RXCLK	15
+#define F2_TXCLK	16
+
+/* FCC3 Clock Source Configuration.  These can be redefined in the board specific file.
+   Can only choose from CLK13-16 */
+#define F3_RXCLK	13
+#define F3_TXCLK	14
+
+/* Automatically generates register configurations */
+#define PC_CLK(x)	((uint)(1<<(x-1)))	/* FCC CLK I/O ports */
+
+#define CMXFCR_RF1CS(x)	((uint)((x-5)<<27))	/* FCC1 Receive Clock Source */
+#define CMXFCR_TF1CS(x)	((uint)((x-5)<<24))	/* FCC1 Transmit Clock Source */
+#define CMXFCR_RF2CS(x)	((uint)((x-9)<<19))	/* FCC2 Receive Clock Source */
+#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16))	/* FCC2 Transmit Clock Source */
+#define CMXFCR_RF3CS(x)	((uint)((x-9)<<11))	/* FCC3 Receive Clock Source */
+#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8))	/* FCC3 Transmit Clock Source */
+
+#define PC_F1RXCLK	PC_CLK(F1_RXCLK)
+#define PC_F1TXCLK	PC_CLK(F1_TXCLK)
+#define CMX1_CLK_ROUTE	(CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
+#define CMX1_CLK_MASK	((uint)0xff000000)
+
+#define PC_F2RXCLK	PC_CLK(F2_RXCLK)
+#define PC_F2TXCLK	PC_CLK(F2_TXCLK)
+#define CMX2_CLK_ROUTE	(CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
+#define CMX2_CLK_MASK	((uint)0x00ff0000)
+
+#define PC_F3RXCLK	PC_CLK(F3_RXCLK)
+#define PC_F3TXCLK	PC_CLK(F3_TXCLK)
+#define CMX3_CLK_ROUTE	(CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
+#define CMX3_CLK_MASK	((uint)0x0000ff00)
+
+/* I/O Pin assignment for FCC1.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PA1_COL		0x00000001U
+#define PA1_CRS		0x00000002U
+#define PA1_TXER	0x00000004U
+#define PA1_TXEN	0x00000008U
+#define PA1_RXDV	0x00000010U
+#define PA1_RXER	0x00000020U
+#define PA1_TXDAT	0x00003c00U
+#define PA1_RXDAT	0x0003c000U
+#define PA1_PSORA0	(PA1_RXDAT | PA1_TXDAT)
+#define PA1_PSORA1	(PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
+		PA1_RXDV | PA1_RXER)
+#define PA1_DIRA0	(PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
+#define PA1_DIRA1	(PA1_TXDAT | PA1_TXEN | PA1_TXER)
+
+
+/* I/O Pin assignment for FCC2.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB2_TXER	0x00000001U
+#define PB2_RXDV	0x00000002U
+#define PB2_TXEN	0x00000004U
+#define PB2_RXER	0x00000008U
+#define PB2_COL		0x00000010U
+#define PB2_CRS		0x00000020U
+#define PB2_TXDAT	0x000003c0U
+#define PB2_RXDAT	0x00003c00U
+#define PB2_PSORB0	(PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
+		PB2_RXER | PB2_RXDV | PB2_TXER)
+#define PB2_PSORB1	(PB2_TXEN)
+#define PB2_DIRB0	(PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
+#define PB2_DIRB1	(PB2_TXDAT | PB2_TXEN | PB2_TXER)
+
+
+/* I/O Pin assignment for FCC3.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB3_RXDV	0x00004000U
+#define PB3_RXER	0x00008000U
+#define PB3_TXER	0x00010000U
+#define PB3_TXEN	0x00020000U
+#define PB3_COL		0x00040000U
+#define PB3_CRS		0x00080000U
+#define PB3_TXDAT	0x0f000000U
+#define PB3_RXDAT	0x00f00000U
+#define PB3_PSORB0	(PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
+		PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
+#define PB3_PSORB1	0
+#define PB3_DIRB0	(PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
+#define PB3_DIRB1	(PB3_TXDAT | PB3_TXEN | PB3_TXER)
+
+#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
+#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
+#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
+
+#endif
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 159dcd9..5cb62c6 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -17,8 +17,8 @@ obj-$(CONFIG_440GX)		+= ibm440gx_common.o
 obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
 obj-$(CONFIG_440SPE)		+= ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o
 ifeq ($(CONFIG_4xx),y)
-ifeq ($(CONFIG_VIRTEX_II_PRO),y)
-obj-$(CONFIG_40x)		+= xilinx_pic.o
+ifeq ($(CONFIG_XILINX_VIRTEX),y)
+obj-$(CONFIG_40x)		+= xilinx_pic.o ppc_sys.o
 else
 ifeq ($(CONFIG_403),y)
 obj-$(CONFIG_40x)		+= ppc403_pic.o
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
index 94ea346..1f01b7e 100644
--- a/arch/ppc/syslib/mv64x60.c
+++ b/arch/ppc/syslib/mv64x60.c
@@ -313,7 +313,7 @@ static struct platform_device mpsc1_device = {
 };
 #endif
 
-#ifdef CONFIG_MV643XX_ETH
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
 static struct resource mv64x60_eth_shared_resources[] = {
 	[0] = {
 		.name	= "ethernet shared base",
@@ -456,7 +456,7 @@ static struct platform_device *mv64x60_pd_devs[] __initdata = {
 	&mpsc0_device,
 	&mpsc1_device,
 #endif
-#ifdef CONFIG_MV643XX_ETH
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
 	&mv64x60_eth_shared_device,
 #endif
 #ifdef CONFIG_MV643XX_ETH_0
diff --git a/arch/ppc/syslib/ppc4xx_pm.c b/arch/ppc/syslib/ppc4xx_pm.c
deleted file mode 100644
index 60a4792..0000000
--- a/arch/ppc/syslib/ppc4xx_pm.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * This an attempt to get Power Management going for the IBM 4xx processor.
- * This was derived from the ppc4xx._setup.c file
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-
-#include <asm/ibm4xx.h>
-
-void __init
-ppc4xx_pm_init(void)
-{
-
-	unsigned int value = 0;
-
-	/* turn off unused hardware to save power */
-#ifdef CONFIG_405GP
-	value |= CPM_DCP;	/* CodePack */
-#endif
-
-#if !defined(CONFIG_IBM_OCP_GPIO)
-	value |= CPM_GPIO0;
-#endif
-
-#if !defined(CONFIG_PPC405_I2C_ADAP)
-	value |= CPM_IIC0;
-#ifdef CONFIG_STB03xxx
-	value |= CPM_IIC1;
-#endif
-#endif
-
-
-#if !defined(CONFIG_405_DMA)
-	value |= CPM_DMA;
-#endif
-
-	mtdcr(DCRN_CPMFR, value);
-
-}
diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c
index 47f04c7..848fb51 100644
--- a/arch/ppc/syslib/xilinx_pic.c
+++ b/arch/ppc/syslib/xilinx_pic.c
@@ -15,7 +15,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/io.h>
-#include <asm/xparameters.h>
+#include <platforms/4xx/xparameters/xparameters.h>
 #include <asm/ibm4xx.h>
 #include <asm/machdep.h>