diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/ppc64/kernel/maple_pci.c | |
download | op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'arch/ppc64/kernel/maple_pci.c')
-rw-r--r-- | arch/ppc64/kernel/maple_pci.c | 521 |
1 files changed, 521 insertions, 0 deletions
diff --git a/arch/ppc64/kernel/maple_pci.c b/arch/ppc64/kernel/maple_pci.c new file mode 100644 index 0000000..5399399 --- /dev/null +++ b/arch/ppc64/kernel/maple_pci.c @@ -0,0 +1,521 @@ +/* + * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), + * IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#define DEBUG + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> + +#include <asm/sections.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/iommu.h> + +#include "pci.h" + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +static struct pci_controller *u3_agp, *u3_ht; + +static int __init fixup_one_level_bus_range(struct device_node *node, int higher) +{ + for (; node != 0;node = node->sibling) { + int * bus_range; + unsigned int *class_code; + int len; + + /* For PCI<->PCI bridges or CardBus bridges, we go down */ + class_code = (unsigned int *) get_property(node, "class-code", NULL); + if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && + (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) + continue; + bus_range = (int *) get_property(node, "bus-range", &len); + if (bus_range != NULL && len > 2 * sizeof(int)) { + if (bus_range[1] > higher) + higher = bus_range[1]; + } + higher = fixup_one_level_bus_range(node->child, higher); + } + return higher; +} + +/* This routine fixes the "bus-range" property of all bridges in the + * system since they tend to have their "last" member wrong on macs + * + * Note that the bus numbers manipulated here are OF bus numbers, they + * are not Linux bus numbers. + */ +static void __init fixup_bus_range(struct device_node *bridge) +{ + int * bus_range; + int len; + + /* Lookup the "bus-range" property for the hose */ + bus_range = (int *) get_property(bridge, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s\n", + bridge->full_name); + return; + } + bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); +} + + +#define U3_AGP_CFA0(devfn, off) \ + ((1 << (unsigned long)PCI_SLOT(dev_fn)) \ + | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \ + | (((unsigned long)(off)) & 0xFCUL)) + +#define U3_AGP_CFA1(bus, devfn, off) \ + ((((unsigned long)(bus)) << 16) \ + |(((unsigned long)(devfn)) << 8) \ + |(((unsigned long)(off)) & 0xFCUL) \ + |1UL) + +static unsigned long u3_agp_cfg_access(struct pci_controller* hose, + u8 bus, u8 dev_fn, u8 offset) +{ + unsigned int caddr; + + if (bus == hose->first_busno) { + if (dev_fn < (11 << 3)) + return 0; + caddr = U3_AGP_CFA0(dev_fn, offset); + } else + caddr = U3_AGP_CFA1(bus, dev_fn, offset); + + /* Uninorth will return garbage if we don't read back the value ! */ + do { + out_le32(hose->cfg_addr, caddr); + } while (in_le32(hose->cfg_addr) != caddr); + + offset &= 0x07; + return ((unsigned long)hose->cfg_data) + offset; +} + +static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_agp_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u3_agp_pci_ops = +{ + u3_agp_read_config, + u3_agp_write_config +}; + + +#define U3_HT_CFA0(devfn, off) \ + ((((unsigned long)devfn) << 8) | offset) +#define U3_HT_CFA1(bus, devfn, off) \ + (U3_HT_CFA0(devfn, off) \ + + (((unsigned long)bus) << 16) \ + + 0x01000000UL) + +static unsigned long u3_ht_cfg_access(struct pci_controller* hose, + u8 bus, u8 devfn, u8 offset) +{ + if (bus == hose->first_busno) { + if (PCI_SLOT(devfn) == 0) + return 0; + return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset); + } else + return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset); +} + +static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + *val = in_8((u8 *)addr); + break; + case 2: + *val = in_le16((u16 *)addr); + break; + default: + *val = in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose; + unsigned long addr; + + hose = pci_bus_to_host(bus); + if (hose == NULL) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = u3_ht_cfg_access(hose, bus->number, devfn, offset); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + switch (len) { + case 1: + out_8((u8 *)addr, val); + (void) in_8((u8 *)addr); + break; + case 2: + out_le16((u16 *)addr, val); + (void) in_le16((u16 *)addr); + break; + default: + out_le32((u32 *)addr, val); + (void) in_le32((u32 *)addr); + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops u3_ht_pci_ops = +{ + u3_ht_read_config, + u3_ht_write_config +}; + +static void __init setup_u3_agp(struct pci_controller* hose) +{ + /* On G5, we move AGP up to high bus number so we don't need + * to reassign bus numbers for HT. If we ever have P2P bridges + * on AGP, we'll have to move pci_assign_all_busses to the + * pci_controller structure so we enable it for AGP and not for + * HT childs. + * We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->first_busno = 0xf0; + hose->last_busno = 0xff; + hose->ops = &u3_agp_pci_ops; + hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000); + hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000); + + u3_agp = hose; +} + +static void __init setup_u3_ht(struct pci_controller* hose) +{ + hose->ops = &u3_ht_pci_ops; + + /* We hard code the address because of the different size of + * the reg address cell, we shall fix that by killing struct + * reg_property and using some accessor functions instead + */ + hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + + hose->first_busno = 0; + hose->last_busno = 0xef; + + u3_ht = hose; +} + +static int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + char* disp_name; + int *bus_range; + int primary = 1; + struct property *of_prop; + + DBG("Adding PCI host bridge %s\n", dev->full_name); + + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", + dev->full_name); + } + + hose = alloc_bootmem(sizeof(struct pci_controller)); + if (hose == NULL) + return -ENOMEM; + pci_setup_pci_controller(hose); + + hose->arch_data = dev; + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + of_prop = alloc_bootmem(sizeof(struct property) + + sizeof(hose->global_number)); + if (of_prop) { + memset(of_prop, 0, sizeof(struct property)); + of_prop->name = "linux,pci-domain"; + of_prop->length = sizeof(hose->global_number); + of_prop->value = (unsigned char *)&of_prop[1]; + memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number)); + prom_add_property(dev, of_prop); + } + + disp_name = NULL; + if (device_is_compatible(dev, "u3-agp")) { + setup_u3_agp(hose); + disp_name = "U3-AGP"; + primary = 0; + } else if (device_is_compatible(dev, "u3-ht")) { + setup_u3_ht(hose); + disp_name = "U3-HT"; + primary = 1; + } + printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n", + disp_name, hose->first_busno, hose->last_busno); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev); + pci_setup_phb_io(hose, primary); + + /* Fixup "bus-range" OF property */ + fixup_bus_range(dev); + + return 0; +} + + +void __init maple_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + DBG(" -> maple_pcibios_fixup\n"); + + for_each_pci_dev(dev) + pci_read_irq_line(dev); + + /* Do the mapping of the IO space */ + phbs_remap_io(); + + DBG(" <- maple_pcibios_fixup\n"); +} + +static void __init maple_fixup_phb_resources(void) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base; + hose->io_resource.start += offset; + hose->io_resource.end += offset; + printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n", + hose->global_number, + hose->io_resource.start, hose->io_resource.end); + } +} + +void __init maple_pci_init(void) +{ + struct device_node *np, *root; + struct device_node *ht = NULL; + + /* Probe root PCI hosts, that is on U3 the AGP host and the + * HyperTransport host. That one is actually "kept" around + * and actually added last as it's resource management relies + * on the AGP resources to have been setup first + */ + root = of_find_node_by_path("/"); + if (root == NULL) { + printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n"); + return; + } + for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) { + if (np->name == NULL) + continue; + if (strcmp(np->name, "pci") == 0) { + if (add_bridge(np) == 0) + of_node_get(np); + } + if (strcmp(np->name, "ht") == 0) { + of_node_get(np); + ht = np; + } + } + of_node_put(root); + + /* Now setup the HyperTransport host if we found any + */ + if (ht && add_bridge(ht) != 0) + of_node_put(ht); + + /* Fixup the IO resources on our host bridges as the common code + * does it only for childs of the host bridges + */ + maple_fixup_phb_resources(); + + /* Setup the linkage between OF nodes and PHBs */ + pci_devs_phb_init(); + + /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We + * assume there is no P2P bridge on the AGP bus, which should be a + * safe assumptions hopefully. + */ + if (u3_agp) { + struct device_node *np = u3_agp->arch_data; + np->busno = 0xf0; + for (np = np->child; np; np = np->sibling) + np->busno = 0xf0; + } + + /* Tell pci.c to use the common resource allocation mecanism */ + pci_probe_only = 0; + + /* Allow all IO */ + io_page_mask = -1; +} + +int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) +{ + struct device_node *np; + int irq = channel ? 15 : 14; + + if (pdev->vendor != PCI_VENDOR_ID_AMD || + pdev->device != PCI_DEVICE_ID_AMD_8111_IDE) + return irq; + + np = pci_device_to_OF_node(pdev); + if (np == NULL) + return irq; + if (np->n_intrs < 2) + return irq; + return np->intrs[channel & 0x1].line; +} + +/* XXX: To remove once all firmwares are ok */ +static void fixup_maple_ide(struct pci_dev* dev) +{ +#if 0 /* Enable this to enable IDE port 0 */ + { + u8 v; + + pci_read_config_byte(dev, 0x40, &v); + v |= 2; + pci_write_config_byte(dev, 0x40, v); + } +#endif +#if 0 /* fix bus master base */ + pci_write_config_dword(dev, 0x20, 0xcc01); + printk("old ide resource: %lx -> %lx \n", + dev->resource[4].start, dev->resource[4].end); + dev->resource[4].start = 0xcc00; + dev->resource[4].end = 0xcc10; +#endif +#if 1 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */ + { + struct pci_dev *apicdev; + u32 v; + + apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0)); + if (apicdev == NULL) + printk("IDE Fixup IRQ: Can't find IO-APIC !\n"); + else { + pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14); + pci_read_config_dword(apicdev, 0xf4, &v); + v &= ~0x00000022; + pci_write_config_dword(apicdev, 0xf4, v); + pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15); + pci_read_config_dword(apicdev, 0xf4, &v); + v &= ~0x00000022; + pci_write_config_dword(apicdev, 0xf4, v); + pci_dev_put(apicdev); + } + } +#endif +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, + fixup_maple_ide); |