summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/prpmc800.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/ppc/platforms/prpmc800.h
downloadop-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/ppc/platforms/prpmc800.h')
-rw-r--r--arch/ppc/platforms/prpmc800.h82
1 files changed, 82 insertions, 0 deletions
diff --git a/arch/ppc/platforms/prpmc800.h b/arch/ppc/platforms/prpmc800.h
new file mode 100644
index 0000000..e53ec9b
--- /dev/null
+++ b/arch/ppc/platforms/prpmc800.h
@@ -0,0 +1,82 @@
+/*
+ * include/asm-ppc/platforms/prpmc800.h
+ *
+ * Definitions for Motorola PrPMC800 board support
+ *
+ * Author: Dale Farnsworth <dale.farnsworth@mvista.com>
+ *
+ * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+ /*
+ * From Processor to PCI:
+ * PCI Mem Space: 0x80000000 - 0xa0000000 -> 0x80000000 - 0xa0000000 (512 MB)
+ * PCI I/O Space: 0xfe400000 - 0xfeef0000 -> 0x00000000 - 0x00b00000 (11 MB)
+ * Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
+ *
+ * From PCI to Processor:
+ * System Memory: 0x00000000 -> 0x00000000
+ */
+
+#ifndef __ASMPPC_PRPMC800_H
+#define __ASMPPC_PRPMC800_H
+
+#define PRPMC800_PCI_CONFIG_ADDR 0xfe000cf8
+#define PRPMC800_PCI_CONFIG_DATA 0xfe000cfc
+
+#define PRPMC800_PROC_PCI_IO_START 0xfe400000U
+#define PRPMC800_PROC_PCI_IO_END 0xfeefffffU
+#define PRPMC800_PCI_IO_START 0x00000000U
+#define PRPMC800_PCI_IO_END 0x00afffffU
+
+#define PRPMC800_PROC_PCI_MEM_START 0x80000000U
+#define PRPMC800_PROC_PCI_MEM_END 0x9fffffffU
+#define PRPMC800_PCI_MEM_START 0x80000000U
+#define PRPMC800_PCI_MEM_END 0x9fffffffU
+
+#define PRPMC800_NM_PROC_PCI_MEM_START 0x40000000U
+#define PRPMC800_NM_PROC_PCI_MEM_END 0xdfffffffU
+#define PRPMC800_NM_PCI_MEM_START 0x40000000U
+#define PRPMC800_NM_PCI_MEM_END 0xdfffffffU
+
+#define PRPMC800_PCI_DRAM_OFFSET 0x00000000U
+#define PRPMC800_PCI_PHY_MEM_OFFSET 0x00000000U
+
+#define PRPMC800_ISA_IO_BASE PRPMC800_PROC_PCI_IO_START
+#define PRPMC800_ISA_MEM_BASE 0x00000000U
+
+#define PRPMC800_HARRIER_XCSR_BASE HARRIER_DEFAULT_XCSR_BASE
+#define PRPMC800_HARRIER_MPIC_BASE 0xff000000
+
+#define PRPMC800_SERIAL_1 0xfeff00c0
+
+#define PRPMC800_BASE_BAUD 1843200
+
+/*
+ * interrupt vector number and priority for harrier internal interrupt
+ * sources
+ */
+#define PRPMC800_INT_IRQ 16
+#define PRPMC800_INT_PRI 15
+
+/* UART Defines. */
+#define RS_TABLE_SIZE 4
+
+/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
+#define BASE_BAUD (PRPMC800_BASE_BAUD / 16)
+
+#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
+
+/* UARTS are at IRQ 16 */
+#define STD_SERIAL_PORT_DFNS \
+ { 0, BASE_BAUD, PRPMC800_SERIAL_1, 16, STD_COM_FLAGS, /* ttyS0 */\
+ iomem_base: (unsigned char *)PRPMC800_SERIAL_1, \
+ iomem_reg_shift: 0, \
+ io_type: SERIAL_IO_MEM },
+
+#define SERIAL_PORT_DFNS \
+ STD_SERIAL_PORT_DFNS
+
+#endif /* __ASMPPC_PRPMC800_H */
OpenPOWER on IntegriCloud