summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2006-01-10 08:28:32 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2006-01-10 08:28:32 -0800
commita62e68488dd5ddb07776555fd7e0435c6d021ac1 (patch)
treed6cec15baa1ddfee108ef77b315dfdea5e3fa71c /arch/powerpc
parentab396e91bfe953db26fa1083d9c3e7a4fbe0334a (diff)
parent3b212db9217d02e623eaa12f41c9b5f8c6a99535 (diff)
downloadop-kernel-dev-a62e68488dd5ddb07776555fd7e0435c6d021ac1.zip
op-kernel-dev-a62e68488dd5ddb07776555fd7e0435c6d021ac1.tar.gz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/Kconfig11
-rw-r--r--arch/powerpc/kernel/Makefile2
-rw-r--r--arch/powerpc/kernel/pci_64.c2
-rw-r--r--arch/powerpc/kernel/ppc_ksyms.c1
-rw-r--r--arch/powerpc/kernel/rtas_pci.c2
-rw-r--r--arch/powerpc/kernel/setup_32.c2
-rw-r--r--arch/powerpc/kernel/setup_64.c2
-rw-r--r--arch/powerpc/kernel/sys_ppc32.c24
-rw-r--r--arch/powerpc/kernel/systbl.S6
-rw-r--r--arch/powerpc/mm/pgtable_64.c2
-rw-r--r--arch/powerpc/platforms/maple/setup.c3
-rw-r--r--arch/powerpc/platforms/pseries/Makefile2
-rw-r--r--arch/powerpc/platforms/pseries/eeh.c489
-rw-r--r--arch/powerpc/platforms/pseries/eeh_cache.c316
-rw-r--r--arch/powerpc/platforms/pseries/eeh_driver.c376
-rw-r--r--arch/powerpc/platforms/pseries/eeh_event.c39
16 files changed, 854 insertions, 425 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 28004f0..935d965 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -275,6 +275,7 @@ config PPC_PSERIES
select PPC_I8259
select PPC_RTAS
select RTAS_ERROR_LOGGING
+ select PPC_UDBG_16550
default y
config PPC_CHRP
@@ -284,6 +285,7 @@ config PPC_CHRP
select PPC_INDIRECT_PCI
select PPC_RTAS
select PPC_MPC106
+ select PPC_UDBG_16550
default y
config PPC_PMAC
@@ -306,6 +308,7 @@ config PPC_PREP
depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
select PPC_I8259
select PPC_INDIRECT_PCI
+ select PPC_UDBG_16550
default y
config PPC_MAPLE
@@ -314,6 +317,7 @@ config PPC_MAPLE
select U3_DART
select MPIC_BROKEN_U3
select GENERIC_TBSYNC
+ select PPC_UDBG_16550
default n
help
This option enables support for the Maple 970FX Evaluation Board.
@@ -324,6 +328,7 @@ config PPC_CELL
depends on PPC_MULTIPLATFORM && PPC64
select PPC_RTAS
select MMIO_NVRAM
+ select PPC_UDBG_16550
config PPC_OF
def_bool y
@@ -370,6 +375,10 @@ config MPIC_BROKEN_U3
depends on PPC_MAPLE
default y
+config PPC_UDBG_16550
+ bool
+ default n
+
config CELL_IIC
depends on PPC_CELL
bool
@@ -403,7 +412,7 @@ config PPC_MPC106
config GENERIC_TBSYNC
bool
- default y if CONFIG_PPC32 && CONFIG_SMP
+ default y if PPC32 && SMP
default n
source "drivers/cpufreq/Kconfig"
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 17ed501..144e284 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -54,7 +54,7 @@ obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_6xx) += idle_6xx.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_SERIAL_8250) += legacy_serial.o udbg_16550.o
+obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
module-$(CONFIG_PPC64) += module_64.o
obj-$(CONFIG_MODULES) += $(module-y)
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index fc60a77..ba21a6c 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -381,7 +381,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
- dev->cfg_size = 256; /*pci_cfg_space_size(dev);*/
+ dev->cfg_size = pci_cfg_space_size(dev);
sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index b275814..16d9a90 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -244,7 +244,6 @@ EXPORT_SYMBOL(set_context);
extern long mol_trampoline;
EXPORT_SYMBOL(mol_trampoline); /* For MOL */
EXPORT_SYMBOL(flush_hash_pages); /* For MOL */
-EXPORT_SYMBOL_GPL(__handle_mm_fault); /* For MOL */
#ifdef CONFIG_SMP
extern int mmu_hash_lock;
EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 45b8109..5579f65 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -72,7 +72,7 @@ static int of_device_available(struct device_node * dn)
return 0;
}
-static int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
+int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
{
int returnval = -1;
unsigned long buid, addr;
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index e5d285a..db72a92 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -299,9 +299,7 @@ void __init setup_arch(char **cmdline_p)
if (ppc_md.init_early)
ppc_md.init_early();
-#ifdef CONFIG_SERIAL_8250
find_legacy_serial_ports();
-#endif
finish_device_tree();
smp_setup_cpu_maps();
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 81567e9..c4b7696 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -472,9 +472,7 @@ void __init setup_system(void)
* hash table management for us, thus ioremap works. We do that early
* so that further code can be debugged
*/
-#ifdef CONFIG_SERIAL_8250
find_legacy_serial_ports();
-#endif
/*
* "Finish" the device-tree, that is do the actual parsing of
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index 0ee44be..475249d 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -552,30 +552,6 @@ asmlinkage long compat_sys_sched_rr_get_interval(u32 pid, struct compat_timespec
return ret;
}
-asmlinkage int compat_sys_pciconfig_read(u32 bus, u32 dfn, u32 off, u32 len, u32 ubuf)
-{
- return sys_pciconfig_read((unsigned long) bus,
- (unsigned long) dfn,
- (unsigned long) off,
- (unsigned long) len,
- compat_ptr(ubuf));
-}
-
-asmlinkage int compat_sys_pciconfig_write(u32 bus, u32 dfn, u32 off, u32 len, u32 ubuf)
-{
- return sys_pciconfig_write((unsigned long) bus,
- (unsigned long) dfn,
- (unsigned long) off,
- (unsigned long) len,
- compat_ptr(ubuf));
-}
-
-asmlinkage int compat_sys_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn)
-{
- return sys_pciconfig_iobase(which, in_bus, in_devfn);
-}
-
-
/* Note: it is necessary to treat mode as an unsigned int,
* with the corresponding cast to a signed int to insure that the
* proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index dd2ab85..6801317 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -239,9 +239,9 @@ SYS32ONLY(ftruncate64)
SYSX(sys_ni_syscall,sys_stat64,sys_stat64)
SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64)
SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64)
-COMPAT_SYS(pciconfig_read)
-COMPAT_SYS(pciconfig_write)
-COMPAT_SYS(pciconfig_iobase)
+SYSCALL(pciconfig_read)
+SYSCALL(pciconfig_write)
+SYSCALL(pciconfig_iobase)
SYSCALL(ni_syscall)
SYSCALL(getdents64)
SYSCALL(pivot_root)
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 2ffca63..7b278d83 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -174,7 +174,7 @@ void __iomem * __ioremap(unsigned long addr, unsigned long size,
pa = addr & PAGE_MASK;
size = PAGE_ALIGN(addr + size) - pa;
- if (size == 0)
+ if ((size == 0) || (pa == 0))
return NULL;
if (mem_init_done) {
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index dd73e38..a1cb4d2 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -71,9 +71,6 @@
#define DBG(fmt...)
#endif
-extern void generic_find_legacy_serial_ports(u64 *physport,
- unsigned int *default_speed);
-
static void maple_restart(char *cmd)
{
unsigned int maple_nvram_base;
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 6accdd1..61616d1 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -4,7 +4,7 @@ obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_XICS) += xics.o
obj-$(CONFIG_SCANLOG) += scanlog.o
-obj-$(CONFIG_EEH) += eeh.o eeh_event.o
+obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
obj-$(CONFIG_HVCS) += hvcserver.o
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 7fbfd16..17cea7f 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -76,15 +76,14 @@
*/
#define EEH_MAX_FAILS 100000
-/* Misc forward declaraions */
-static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn);
-
/* RTAS tokens */
static int ibm_set_eeh_option;
static int ibm_set_slot_reset;
static int ibm_read_slot_reset_state;
static int ibm_read_slot_reset_state2;
static int ibm_slot_error_detail;
+static int ibm_get_config_addr_info;
+static int ibm_configure_bridge;
int eeh_subsystem_enabled;
EXPORT_SYMBOL(eeh_subsystem_enabled);
@@ -98,308 +97,23 @@ static DEFINE_SPINLOCK(slot_errbuf_lock);
static int eeh_error_buf_size;
/* System monitoring statistics */
-static DEFINE_PER_CPU(unsigned long, no_device);
-static DEFINE_PER_CPU(unsigned long, no_dn);
-static DEFINE_PER_CPU(unsigned long, no_cfg_addr);
-static DEFINE_PER_CPU(unsigned long, ignored_check);
-static DEFINE_PER_CPU(unsigned long, total_mmio_ffs);
-static DEFINE_PER_CPU(unsigned long, false_positives);
-static DEFINE_PER_CPU(unsigned long, ignored_failures);
-static DEFINE_PER_CPU(unsigned long, slot_resets);
-
-/**
- * The pci address cache subsystem. This subsystem places
- * PCI device address resources into a red-black tree, sorted
- * according to the address range, so that given only an i/o
- * address, the corresponding PCI device can be **quickly**
- * found. It is safe to perform an address lookup in an interrupt
- * context; this ability is an important feature.
- *
- * Currently, the only customer of this code is the EEH subsystem;
- * thus, this code has been somewhat tailored to suit EEH better.
- * In particular, the cache does *not* hold the addresses of devices
- * for which EEH is not enabled.
- *
- * (Implementation Note: The RB tree seems to be better/faster
- * than any hash algo I could think of for this problem, even
- * with the penalty of slow pointer chases for d-cache misses).
- */
-struct pci_io_addr_range
-{
- struct rb_node rb_node;
- unsigned long addr_lo;
- unsigned long addr_hi;
- struct pci_dev *pcidev;
- unsigned int flags;
-};
-
-static struct pci_io_addr_cache
-{
- struct rb_root rb_root;
- spinlock_t piar_lock;
-} pci_io_addr_cache_root;
-
-static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr)
-{
- struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node;
-
- while (n) {
- struct pci_io_addr_range *piar;
- piar = rb_entry(n, struct pci_io_addr_range, rb_node);
-
- if (addr < piar->addr_lo) {
- n = n->rb_left;
- } else {
- if (addr > piar->addr_hi) {
- n = n->rb_right;
- } else {
- pci_dev_get(piar->pcidev);
- return piar->pcidev;
- }
- }
- }
-
- return NULL;
-}
-
-/**
- * pci_get_device_by_addr - Get device, given only address
- * @addr: mmio (PIO) phys address or i/o port number
- *
- * Given an mmio phys address, or a port number, find a pci device
- * that implements this address. Be sure to pci_dev_put the device
- * when finished. I/O port numbers are assumed to be offset
- * from zero (that is, they do *not* have pci_io_addr added in).
- * It is safe to call this function within an interrupt.
- */
-static struct pci_dev *pci_get_device_by_addr(unsigned long addr)
-{
- struct pci_dev *dev;
- unsigned long flags;
-
- spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
- dev = __pci_get_device_by_addr(addr);
- spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
- return dev;
-}
-
-#ifdef DEBUG
-/*
- * Handy-dandy debug print routine, does nothing more
- * than print out the contents of our addr cache.
- */
-static void pci_addr_cache_print(struct pci_io_addr_cache *cache)
-{
- struct rb_node *n;
- int cnt = 0;
-
- n = rb_first(&cache->rb_root);
- while (n) {
- struct pci_io_addr_range *piar;
- piar = rb_entry(n, struct pci_io_addr_range, rb_node);
- printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n",
- (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt,
- piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev));
- cnt++;
- n = rb_next(n);
- }
-}
-#endif
-
-/* Insert address range into the rb tree. */
-static struct pci_io_addr_range *
-pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
- unsigned long ahi, unsigned int flags)
-{
- struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node;
- struct rb_node *parent = NULL;
- struct pci_io_addr_range *piar;
-
- /* Walk tree, find a place to insert into tree */
- while (*p) {
- parent = *p;
- piar = rb_entry(parent, struct pci_io_addr_range, rb_node);
- if (ahi < piar->addr_lo) {
- p = &parent->rb_left;
- } else if (alo > piar->addr_hi) {
- p = &parent->rb_right;
- } else {
- if (dev != piar->pcidev ||
- alo != piar->addr_lo || ahi != piar->addr_hi) {
- printk(KERN_WARNING "PIAR: overlapping address range\n");
- }
- return piar;
- }
- }
- piar = (struct pci_io_addr_range *)kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC);
- if (!piar)
- return NULL;
+static unsigned long no_device;
+static unsigned long no_dn;
+static unsigned long no_cfg_addr;
+static unsigned long ignored_check;
+static unsigned long total_mmio_ffs;
+static unsigned long false_positives;
+static unsigned long ignored_failures;
+static unsigned long slot_resets;
- piar->addr_lo = alo;
- piar->addr_hi = ahi;
- piar->pcidev = dev;
- piar->flags = flags;
-
-#ifdef DEBUG
- printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n",
- alo, ahi, pci_name (dev));
-#endif
-
- rb_link_node(&piar->rb_node, parent, p);
- rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
-
- return piar;
-}
-
-static void __pci_addr_cache_insert_device(struct pci_dev *dev)
-{
- struct device_node *dn;
- struct pci_dn *pdn;
- int i;
- int inserted = 0;
-
- dn = pci_device_to_OF_node(dev);
- if (!dn) {
- printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev));
- return;
- }
-
- /* Skip any devices for which EEH is not enabled. */
- pdn = PCI_DN(dn);
- if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
- pdn->eeh_mode & EEH_MODE_NOCHECK) {
-#ifdef DEBUG
- printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n",
- pci_name(dev), pdn->node->full_name);
-#endif
- return;
- }
-
- /* The cache holds a reference to the device... */
- pci_dev_get(dev);
-
- /* Walk resources on this device, poke them into the tree */
- for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
- unsigned long start = pci_resource_start(dev,i);
- unsigned long end = pci_resource_end(dev,i);
- unsigned int flags = pci_resource_flags(dev,i);
-
- /* We are interested only bus addresses, not dma or other stuff */
- if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM)))
- continue;
- if (start == 0 || ~start == 0 || end == 0 || ~end == 0)
- continue;
- pci_addr_cache_insert(dev, start, end, flags);
- inserted = 1;
- }
-
- /* If there was nothing to add, the cache has no reference... */
- if (!inserted)
- pci_dev_put(dev);
-}
-
-/**
- * pci_addr_cache_insert_device - Add a device to the address cache
- * @dev: PCI device whose I/O addresses we are interested in.
- *
- * In order to support the fast lookup of devices based on addresses,
- * we maintain a cache of devices that can be quickly searched.
- * This routine adds a device to that cache.
- */
-static void pci_addr_cache_insert_device(struct pci_dev *dev)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
- __pci_addr_cache_insert_device(dev);
- spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
-}
-
-static inline void __pci_addr_cache_remove_device(struct pci_dev *dev)
-{
- struct rb_node *n;
- int removed = 0;
-
-restart:
- n = rb_first(&pci_io_addr_cache_root.rb_root);
- while (n) {
- struct pci_io_addr_range *piar;
- piar = rb_entry(n, struct pci_io_addr_range, rb_node);
-
- if (piar->pcidev == dev) {
- rb_erase(n, &pci_io_addr_cache_root.rb_root);
- removed = 1;
- kfree(piar);
- goto restart;
- }
- n = rb_next(n);
- }
-
- /* The cache no longer holds its reference to this device... */
- if (removed)
- pci_dev_put(dev);
-}
-
-/**
- * pci_addr_cache_remove_device - remove pci device from addr cache
- * @dev: device to remove
- *
- * Remove a device from the addr-cache tree.
- * This is potentially expensive, since it will walk
- * the tree multiple times (once per resource).
- * But so what; device removal doesn't need to be that fast.
- */
-static void pci_addr_cache_remove_device(struct pci_dev *dev)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
- __pci_addr_cache_remove_device(dev);
- spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
-}
-
-/**
- * pci_addr_cache_build - Build a cache of I/O addresses
- *
- * Build a cache of pci i/o addresses. This cache will be used to
- * find the pci device that corresponds to a given address.
- * This routine scans all pci busses to build the cache.
- * Must be run late in boot process, after the pci controllers
- * have been scaned for devices (after all device resources are known).
- */
-void __init pci_addr_cache_build(void)
-{
- struct device_node *dn;
- struct pci_dev *dev = NULL;
-
- if (!eeh_subsystem_enabled)
- return;
-
- spin_lock_init(&pci_io_addr_cache_root.piar_lock);
-
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
- /* Ignore PCI bridges ( XXX why ??) */
- if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) {
- continue;
- }
- pci_addr_cache_insert_device(dev);
-
- /* Save the BAR's; firmware doesn't restore these after EEH reset */
- dn = pci_device_to_OF_node(dev);
- eeh_save_bars(dev, PCI_DN(dn));
- }
-
-#ifdef DEBUG
- /* Verify tree built up above, echo back the list of addrs. */
- pci_addr_cache_print(&pci_io_addr_cache_root);
-#endif
-}
+#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
/* --------------------------------------------------------------- */
-/* Above lies the PCI Address Cache. Below lies the EEH event infrastructure */
+/* Below lies the EEH event infrastructure */
void eeh_slot_error_detail (struct pci_dn *pdn, int severity)
{
+ int config_addr;
unsigned long flags;
int rc;
@@ -407,8 +121,13 @@ void eeh_slot_error_detail (struct pci_dn *pdn, int severity)
spin_lock_irqsave(&slot_errbuf_lock, flags);
memset(slot_errbuf, 0, eeh_error_buf_size);
+ /* Use PE configuration address, if present */
+ config_addr = pdn->eeh_config_addr;
+ if (pdn->eeh_pe_config_addr)
+ config_addr = pdn->eeh_pe_config_addr;
+
rc = rtas_call(ibm_slot_error_detail,
- 8, 1, NULL, pdn->eeh_config_addr,
+ 8, 1, NULL, config_addr,
BUID_HI(pdn->phb->buid),
BUID_LO(pdn->phb->buid), NULL, 0,
virt_to_phys(slot_errbuf),
@@ -428,6 +147,7 @@ void eeh_slot_error_detail (struct pci_dn *pdn, int severity)
static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
{
int token, outputs;
+ int config_addr;
if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
token = ibm_read_slot_reset_state2;
@@ -438,7 +158,12 @@ static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
outputs = 3;
}
- return rtas_call(token, 3, outputs, rets, pdn->eeh_config_addr,
+ /* Use PE configuration address, if present */
+ config_addr = pdn->eeh_config_addr;
+ if (pdn->eeh_pe_config_addr)
+ config_addr = pdn->eeh_pe_config_addr;
+
+ return rtas_call(token, 3, outputs, rets, config_addr,
BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid));
}
@@ -462,7 +187,7 @@ static inline unsigned long eeh_token_to_phys(unsigned long token)
/**
* Return the "partitionable endpoint" (pe) under which this device lies
*/
-static struct device_node * find_device_pe(struct device_node *dn)
+struct device_node * find_device_pe(struct device_node *dn)
{
while ((dn->parent) && PCI_DN(dn->parent) &&
(PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
@@ -485,6 +210,11 @@ static void __eeh_mark_slot (struct device_node *dn, int mode_flag)
if (PCI_DN(dn)) {
PCI_DN(dn)->eeh_mode |= mode_flag;
+ /* Mark the pci device driver too */
+ struct pci_dev *dev = PCI_DN(dn)->pcidev;
+ if (dev && dev->driver)
+ dev->error_state = pci_channel_io_frozen;
+
if (dn->child)
__eeh_mark_slot (dn->child, mode_flag);
}
@@ -495,6 +225,11 @@ static void __eeh_mark_slot (struct device_node *dn, int mode_flag)
void eeh_mark_slot (struct device_node *dn, int mode_flag)
{
dn = find_device_pe (dn);
+
+ /* Back up one, since config addrs might be shared */
+ if (PCI_DN(dn) && PCI_DN(dn)->eeh_pe_config_addr)
+ dn = dn->parent;
+
PCI_DN(dn)->eeh_mode |= mode_flag;
__eeh_mark_slot (dn->child, mode_flag);
}
@@ -516,7 +251,13 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag)
{
unsigned long flags;
spin_lock_irqsave(&confirm_error_lock, flags);
+
dn = find_device_pe (dn);
+
+ /* Back up one, since config addrs might be shared */
+ if (PCI_DN(dn) && PCI_DN(dn)->eeh_pe_config_addr)
+ dn = dn->parent;
+
PCI_DN(dn)->eeh_mode &= ~mode_flag;
PCI_DN(dn)->eeh_check_count = 0;
__eeh_clear_slot (dn->child, mode_flag);
@@ -544,15 +285,16 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
int rets[3];
unsigned long flags;
struct pci_dn *pdn;
+ enum pci_channel_state state;
int rc = 0;
- __get_cpu_var(total_mmio_ffs)++;
+ total_mmio_ffs++;
if (!eeh_subsystem_enabled)
return 0;
if (!dn) {
- __get_cpu_var(no_dn)++;
+ no_dn++;
return 0;
}
pdn = PCI_DN(dn);
@@ -560,7 +302,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
/* Access to IO BARs might get this far and still not want checking. */
if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
pdn->eeh_mode & EEH_MODE_NOCHECK) {
- __get_cpu_var(ignored_check)++;
+ ignored_check++;
#ifdef DEBUG
printk ("EEH:ignored check (%x) for %s %s\n",
pdn->eeh_mode, pci_name (dev), dn->full_name);
@@ -568,8 +310,8 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
return 0;
}
- if (!pdn->eeh_config_addr) {
- __get_cpu_var(no_cfg_addr)++;
+ if (!pdn->eeh_config_addr && !pdn->eeh_pe_config_addr) {
+ no_cfg_addr++;
return 0;
}
@@ -611,7 +353,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
if (ret != 0) {
printk(KERN_WARNING "EEH: read_slot_reset_state() failed; rc=%d dn=%s\n",
ret, dn->full_name);
- __get_cpu_var(false_positives)++;
+ false_positives++;
rc = 0;
goto dn_unlock;
}
@@ -620,14 +362,14 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
if (rets[1] != 1) {
printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n",
ret, dn->full_name);
- __get_cpu_var(false_positives)++;
+ false_positives++;
rc = 0;
goto dn_unlock;
}
/* If not the kind of error we know about, punt. */
if (rets[0] != 2 && rets[0] != 4 && rets[0] != 5) {
- __get_cpu_var(false_positives)++;
+ false_positives++;
rc = 0;
goto dn_unlock;
}
@@ -635,12 +377,12 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
/* Note that config-io to empty slots may fail;
* we recognize empty because they don't have children. */
if ((rets[0] == 5) && (dn->child == NULL)) {
- __get_cpu_var(false_positives)++;
+ false_positives++;
rc = 0;
goto dn_unlock;
}
- __get_cpu_var(slot_resets)++;
+ slot_resets++;
/* Avoid repeated reports of this failure, including problems
* with other functions on this device, and functions under
@@ -648,8 +390,13 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
eeh_mark_slot (dn, EEH_MODE_ISOLATED);
spin_unlock_irqrestore(&confirm_error_lock, flags);
- eeh_send_failure_event (dn, dev, rets[0], rets[2]);
-
+ state = pci_channel_io_normal;
+ if ((rets[0] == 2) || (rets[0] == 4))
+ state = pci_channel_io_frozen;
+ if (rets[0] == 5)
+ state = pci_channel_io_perm_failure;
+ eeh_send_failure_event (dn, dev, state, rets[2]);
+
/* Most EEH events are due to device driver bugs. Having
* a stack trace will help the device-driver authors figure
* out what happened. So print that out. */
@@ -685,7 +432,7 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
addr = eeh_token_to_phys((unsigned long __force) token);
dev = pci_get_device_by_addr(addr);
if (!dev) {
- __get_cpu_var(no_device)++;
+ no_device++;
return val;
}
@@ -716,11 +463,16 @@ eeh_slot_availability(struct pci_dn *pdn)
if (rc) return rc;
if (rets[1] == 0) return -1; /* EEH is not supported */
- if (rets[0] == 0) return 0; /* Oll Korrect */
+ if (rets[0] == 0) return 0; /* Oll Korrect */
if (rets[0] == 5) {
if (rets[2] == 0) return -1; /* permanently unavailable */
return rets[2]; /* number of millisecs to wait */
}
+ if (rets[0] == 1)
+ return 250;
+
+ printk (KERN_ERR "EEH: Slot unavailable: rc=%d, rets=%d %d %d\n",
+ rc, rets[0], rets[1], rets[2]);
return -1;
}
@@ -737,6 +489,7 @@ eeh_slot_availability(struct pci_dn *pdn)
static void
rtas_pci_slot_reset(struct pci_dn *pdn, int state)
{
+ int config_addr;
int rc;
BUG_ON (pdn==NULL);
@@ -747,8 +500,13 @@ rtas_pci_slot_reset(struct pci_dn *pdn, int state)
return;
}
+ /* Use PE configuration address, if present */
+ config_addr = pdn->eeh_config_addr;
+ if (pdn->eeh_pe_config_addr)
+ config_addr = pdn->eeh_pe_config_addr;
+
rc = rtas_call(ibm_set_slot_reset,4,1, NULL,
- pdn->eeh_config_addr,
+ config_addr,
BUID_HI(pdn->phb->buid),
BUID_LO(pdn->phb->buid),
state);
@@ -761,9 +519,11 @@ rtas_pci_slot_reset(struct pci_dn *pdn, int state)
/** rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
* dn -- device node to be reset.
+ *
+ * Return 0 if success, else a non-zero value.
*/
-void
+int
rtas_set_slot_reset(struct pci_dn *pdn)
{
int i, rc;
@@ -793,10 +553,21 @@ rtas_set_slot_reset(struct pci_dn *pdn)
* ready to be used; if not, wait for recovery. */
for (i=0; i<10; i++) {
rc = eeh_slot_availability (pdn);
- if (rc <= 0) break;
+ if (rc < 0)
+ printk (KERN_ERR "EEH: failed (%d) to reset slot %s\n", rc, pdn->node->full_name);
+ if (rc == 0)
+ return 0;
+ if (rc < 0)
+ return -1;
msleep (rc+100);
}
+
+ rc = eeh_slot_availability (pdn);
+ if (rc)
+ printk (KERN_ERR "EEH: timeout resetting slot %s\n", pdn->node->full_name);
+
+ return rc;
}
/* ------------------------------------------------------- */
@@ -851,7 +622,7 @@ void eeh_restore_bars(struct pci_dn *pdn)
if (!pdn)
return;
- if (! pdn->eeh_is_bridge)
+ if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code))
__restore_bars (pdn);
dn = pdn->node->child;
@@ -869,30 +640,30 @@ void eeh_restore_bars(struct pci_dn *pdn)
* PCI devices are added individuallly; but, for the restore,
* an entire slot is reset at a time.
*/
-static void eeh_save_bars(struct pci_dev * pdev, struct pci_dn *pdn)
+static void eeh_save_bars(struct pci_dn *pdn)
{
int i;
- if (!pdev || !pdn )
+ if (!pdn )
return;
for (i = 0; i < 16; i++)
- pci_read_config_dword(pdev, i * 4, &pdn->config_space[i]);
-
- if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- pdn->eeh_is_bridge = 1;
+ rtas_read_config(pdn, i * 4, 4, &pdn->config_space[i]);
}
void
rtas_configure_bridge(struct pci_dn *pdn)
{
- int token = rtas_token ("ibm,configure-bridge");
+ int config_addr;
int rc;
- if (token == RTAS_UNKNOWN_SERVICE)
- return;
- rc = rtas_call(token,3,1, NULL,
- pdn->eeh_config_addr,
+ /* Use PE configuration address, if present */
+ config_addr = pdn->eeh_config_addr;
+ if (pdn->eeh_pe_config_addr)
+ config_addr = pdn->eeh_pe_config_addr;
+
+ rc = rtas_call(ibm_configure_bridge,3,1, NULL,
+ config_addr,
BUID_HI(pdn->phb->buid),
BUID_LO(pdn->phb->buid));
if (rc) {
@@ -927,6 +698,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
int enable;
struct pci_dn *pdn = PCI_DN(dn);
+ pdn->class_code = 0;
pdn->eeh_mode = 0;
pdn->eeh_check_count = 0;
pdn->eeh_freeze_count = 0;
@@ -943,6 +715,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
pdn->eeh_mode |= EEH_MODE_NOCHECK;
return NULL;
}
+ pdn->class_code = *class_code;
/*
* Now decide if we are going to "Disable" EEH checking
@@ -953,8 +726,10 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
* But there are a few cases like display devices that make sense.
*/
enable = 1; /* i.e. we will do checking */
+#if 0
if ((*class_code >> 16) == PCI_BASE_CLASS_DISPLAY)
enable = 0;
+#endif
if (!enable)
pdn->eeh_mode |= EEH_MODE_NOCHECK;
@@ -973,8 +748,22 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
eeh_subsystem_enabled = 1;
pdn->eeh_mode |= EEH_MODE_SUPPORTED;
pdn->eeh_config_addr = regs[0];
+
+ /* If the newer, better, ibm,get-config-addr-info is supported,
+ * then use that instead. */
+ pdn->eeh_pe_config_addr = 0;
+ if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
+ unsigned int rets[2];
+ ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets,
+ pdn->eeh_config_addr,
+ info->buid_hi, info->buid_lo,
+ 0);
+ if (ret == 0)
+ pdn->eeh_pe_config_addr = rets[0];
+ }
#ifdef DEBUG
- printk(KERN_DEBUG "EEH: %s: eeh enabled\n", dn->full_name);
+ printk(KERN_DEBUG "EEH: %s: eeh enabled, config=%x pe_config=%x\n",
+ dn->full_name, pdn->eeh_config_addr, pdn->eeh_pe_config_addr);
#endif
} else {
@@ -993,6 +782,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
dn->full_name);
}
+ eeh_save_bars(pdn);
return NULL;
}
@@ -1026,6 +816,8 @@ void __init eeh_init(void)
ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2");
ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state");
ibm_slot_error_detail = rtas_token("ibm,slot-error-detail");
+ ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
+ ibm_configure_bridge = rtas_token ("ibm,configure-bridge");
if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE)
return;
@@ -1080,12 +872,10 @@ void eeh_add_device_early(struct device_node *dn)
if (!dn || !PCI_DN(dn))
return;
phb = PCI_DN(dn)->phb;
- if (NULL == phb || 0 == phb->buid) {
- printk(KERN_WARNING "EEH: Expected buid but found none for %s\n",
- dn->full_name);
- dump_stack();
+
+ /* USB Bus children of PCI devices will not have BUID's */
+ if (NULL == phb || 0 == phb->buid)
return;
- }
info.buid_hi = BUID_HI(phb->buid);
info.buid_lo = BUID_LO(phb->buid);
@@ -1127,7 +917,6 @@ void eeh_add_device_late(struct pci_dev *dev)
pdn->pcidev = dev;
pci_addr_cache_insert_device (dev);
- eeh_save_bars(dev, pdn);
}
EXPORT_SYMBOL_GPL(eeh_add_device_late);
@@ -1175,25 +964,9 @@ EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
static int proc_eeh_show(struct seq_file *m, void *v)
{
- unsigned int cpu;
- unsigned long ffs = 0, positives = 0, failures = 0;
- unsigned long resets = 0;
- unsigned long no_dev = 0, no_dn = 0, no_cfg = 0, no_check = 0;
-
- for_each_cpu(cpu) {
- ffs += per_cpu(total_mmio_ffs, cpu);
- positives += per_cpu(false_positives, cpu);
- failures += per_cpu(ignored_failures, cpu);
- resets += per_cpu(slot_resets, cpu);
- no_dev += per_cpu(no_device, cpu);
- no_dn += per_cpu(no_dn, cpu);
- no_cfg += per_cpu(no_cfg_addr, cpu);
- no_check += per_cpu(ignored_check, cpu);
- }
-
if (0 == eeh_subsystem_enabled) {
seq_printf(m, "EEH Subsystem is globally disabled\n");
- seq_printf(m, "eeh_total_mmio_ffs=%ld\n", ffs);
+ seq_printf(m, "eeh_total_mmio_ffs=%ld\n", total_mmio_ffs);
} else {
seq_printf(m, "EEH Subsystem is enabled\n");
seq_printf(m,
@@ -1205,8 +978,10 @@ static int proc_eeh_show(struct seq_file *m, void *v)
"eeh_false_positives=%ld\n"
"eeh_ignored_failures=%ld\n"
"eeh_slot_resets=%ld\n",
- no_dev, no_dn, no_cfg, no_check,
- ffs, positives, failures, resets);
+ no_device, no_dn, no_cfg_addr,
+ ignored_check, total_mmio_ffs,
+ false_positives, ignored_failures,
+ slot_resets);
}
return 0;
diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c
new file mode 100644
index 0000000..d4a402c
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/eeh_cache.c
@@ -0,0 +1,316 @@
+/*
+ * eeh_cache.c
+ * PCI address cache; allows the lookup of PCI devices based on I/O address
+ *
+ * Copyright (C) 2004 Linas Vepstas <linas@austin.ibm.com> IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/rbtree.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+
+#undef DEBUG
+
+/**
+ * The pci address cache subsystem. This subsystem places
+ * PCI device address resources into a red-black tree, sorted
+ * according to the address range, so that given only an i/o
+ * address, the corresponding PCI device can be **quickly**
+ * found. It is safe to perform an address lookup in an interrupt
+ * context; this ability is an important feature.
+ *
+ * Currently, the only customer of this code is the EEH subsystem;
+ * thus, this code has been somewhat tailored to suit EEH better.
+ * In particular, the cache does *not* hold the addresses of devices
+ * for which EEH is not enabled.
+ *
+ * (Implementation Note: The RB tree seems to be better/faster
+ * than any hash algo I could think of for this problem, even
+ * with the penalty of slow pointer chases for d-cache misses).
+ */
+struct pci_io_addr_range
+{
+ struct rb_node rb_node;
+ unsigned long addr_lo;
+ unsigned long addr_hi;
+ struct pci_dev *pcidev;
+ unsigned int flags;
+};
+
+static struct pci_io_addr_cache
+{
+ struct rb_root rb_root;
+ spinlock_t piar_lock;
+} pci_io_addr_cache_root;
+
+static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr)
+{
+ struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node;
+
+ while (n) {
+ struct pci_io_addr_range *piar;
+ piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+
+ if (addr < piar->addr_lo) {
+ n = n->rb_left;
+ } else {
+ if (addr > piar->addr_hi) {
+ n = n->rb_right;
+ } else {
+ pci_dev_get(piar->pcidev);
+ return piar->pcidev;
+ }
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * pci_get_device_by_addr - Get device, given only address
+ * @addr: mmio (PIO) phys address or i/o port number
+ *
+ * Given an mmio phys address, or a port number, find a pci device
+ * that implements this address. Be sure to pci_dev_put the device
+ * when finished. I/O port numbers are assumed to be offset
+ * from zero (that is, they do *not* have pci_io_addr added in).
+ * It is safe to call this function within an interrupt.
+ */
+struct pci_dev *pci_get_device_by_addr(unsigned long addr)
+{
+ struct pci_dev *dev;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+ dev = __pci_get_device_by_addr(addr);
+ spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+ return dev;
+}
+
+#ifdef DEBUG
+/*
+ * Handy-dandy debug print routine, does nothing more
+ * than print out the contents of our addr cache.
+ */
+static void pci_addr_cache_print(struct pci_io_addr_cache *cache)
+{
+ struct rb_node *n;
+ int cnt = 0;
+
+ n = rb_first(&cache->rb_root);
+ while (n) {
+ struct pci_io_addr_range *piar;
+ piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+ printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n",
+ (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt,
+ piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev));
+ cnt++;
+ n = rb_next(n);
+ }
+}
+#endif
+
+/* Insert address range into the rb tree. */
+static struct pci_io_addr_range *
+pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
+ unsigned long ahi, unsigned int flags)
+{
+ struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node;
+ struct rb_node *parent = NULL;
+ struct pci_io_addr_range *piar;
+
+ /* Walk tree, find a place to insert into tree */
+ while (*p) {
+ parent = *p;
+ piar = rb_entry(parent, struct pci_io_addr_range, rb_node);
+ if (ahi < piar->addr_lo) {
+ p = &parent->rb_left;
+ } else if (alo > piar->addr_hi) {
+ p = &parent->rb_right;
+ } else {
+ if (dev != piar->pcidev ||
+ alo != piar->addr_lo || ahi != piar->addr_hi) {
+ printk(KERN_WARNING "PIAR: overlapping address range\n");
+ }
+ return piar;
+ }
+ }
+ piar = (struct pci_io_addr_range *)kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC);
+ if (!piar)
+ return NULL;
+
+ piar->addr_lo = alo;
+ piar->addr_hi = ahi;
+ piar->pcidev = dev;
+ piar->flags = flags;
+
+#ifdef DEBUG
+ printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n",
+ alo, ahi, pci_name (dev));
+#endif
+
+ rb_link_node(&piar->rb_node, parent, p);
+ rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root);
+
+ return piar;
+}
+
+static void __pci_addr_cache_insert_device(struct pci_dev *dev)
+{
+ struct device_node *dn;
+ struct pci_dn *pdn;
+ int i;
+ int inserted = 0;
+
+ dn = pci_device_to_OF_node(dev);
+ if (!dn) {
+ printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", pci_name(dev));
+ return;
+ }
+
+ /* Skip any devices for which EEH is not enabled. */
+ pdn = PCI_DN(dn);
+ if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
+ pdn->eeh_mode & EEH_MODE_NOCHECK) {
+#ifdef DEBUG
+ printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n",
+ pci_name(dev), pdn->node->full_name);
+#endif
+ return;
+ }
+
+ /* The cache holds a reference to the device... */
+ pci_dev_get(dev);
+
+ /* Walk resources on this device, poke them into the tree */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ unsigned long start = pci_resource_start(dev,i);
+ unsigned long end = pci_resource_end(dev,i);
+ unsigned int flags = pci_resource_flags(dev,i);
+
+ /* We are interested only bus addresses, not dma or other stuff */
+ if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+ continue;
+ if (start == 0 || ~start == 0 || end == 0 || ~end == 0)
+ continue;
+ pci_addr_cache_insert(dev, start, end, flags);
+ inserted = 1;
+ }
+
+ /* If there was nothing to add, the cache has no reference... */
+ if (!inserted)
+ pci_dev_put(dev);
+}
+
+/**
+ * pci_addr_cache_insert_device - Add a device to the address cache
+ * @dev: PCI device whose I/O addresses we are interested in.
+ *
+ * In order to support the fast lookup of devices based on addresses,
+ * we maintain a cache of devices that can be quickly searched.
+ * This routine adds a device to that cache.
+ */
+void pci_addr_cache_insert_device(struct pci_dev *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+ __pci_addr_cache_insert_device(dev);
+ spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+}
+
+static inline void __pci_addr_cache_remove_device(struct pci_dev *dev)
+{
+ struct rb_node *n;
+ int removed = 0;
+
+restart:
+ n = rb_first(&pci_io_addr_cache_root.rb_root);
+ while (n) {
+ struct pci_io_addr_range *piar;
+ piar = rb_entry(n, struct pci_io_addr_range, rb_node);
+
+ if (piar->pcidev == dev) {
+ rb_erase(n, &pci_io_addr_cache_root.rb_root);
+ removed = 1;
+ kfree(piar);
+ goto restart;
+ }
+ n = rb_next(n);
+ }
+
+ /* The cache no longer holds its reference to this device... */
+ if (removed)
+ pci_dev_put(dev);
+}
+
+/**
+ * pci_addr_cache_remove_device - remove pci device from addr cache
+ * @dev: device to remove
+ *
+ * Remove a device from the addr-cache tree.
+ * This is potentially expensive, since it will walk
+ * the tree multiple times (once per resource).
+ * But so what; device removal doesn't need to be that fast.
+ */
+void pci_addr_cache_remove_device(struct pci_dev *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
+ __pci_addr_cache_remove_device(dev);
+ spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
+}
+
+/**
+ * pci_addr_cache_build - Build a cache of I/O addresses
+ *
+ * Build a cache of pci i/o addresses. This cache will be used to
+ * find the pci device that corresponds to a given address.
+ * This routine scans all pci busses to build the cache.
+ * Must be run late in boot process, after the pci controllers
+ * have been scaned for devices (after all device resources are known).
+ */
+void __init pci_addr_cache_build(void)
+{
+ struct device_node *dn;
+ struct pci_dev *dev = NULL;
+
+ spin_lock_init(&pci_io_addr_cache_root.piar_lock);
+
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ /* Ignore PCI bridges */
+ if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+ continue;
+
+ pci_addr_cache_insert_device(dev);
+
+ dn = pci_device_to_OF_node(dev);
+ pci_dev_get (dev); /* matching put is in eeh_remove_device() */
+ PCI_DN(dn)->pcidev = dev;
+ }
+
+#ifdef DEBUG
+ /* Verify tree built up above, echo back the list of addrs. */
+ pci_addr_cache_print(&pci_io_addr_cache_root);
+#endif
+}
+
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
new file mode 100644
index 0000000..6373372
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -0,0 +1,376 @@
+/*
+ * PCI Error Recovery Driver for RPA-compliant PPC64 platform.
+ * Copyright (C) 2004, 2005 Linas Vepstas <linas@linas.org>
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <linas@us.ibm.com>
+ *
+ */
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/pci.h>
+#include <asm/eeh.h>
+#include <asm/eeh_event.h>
+#include <asm/ppc-pci.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+
+
+static inline const char * pcid_name (struct pci_dev *pdev)
+{
+ if (pdev->dev.driver)
+ return pdev->dev.driver->name;
+ return "";
+}
+
+#ifdef DEBUG
+static void print_device_node_tree (struct pci_dn *pdn, int dent)
+{
+ int i;
+ if (!pdn) return;
+ for (i=0;i<dent; i++)
+ printk(" ");
+ printk("dn=%s mode=%x \tcfg_addr=%x pe_addr=%x \tfull=%s\n",
+ pdn->node->name, pdn->eeh_mode, pdn->eeh_config_addr,
+ pdn->eeh_pe_config_addr, pdn->node->full_name);
+ dent += 3;
+ struct device_node *pc = pdn->node->child;
+ while (pc) {
+ print_device_node_tree(PCI_DN(pc), dent);
+ pc = pc->sibling;
+ }
+}
+#endif
+
+/**
+ * irq_in_use - return true if this irq is being used
+ */
+static int irq_in_use(unsigned int irq)
+{
+ int rc = 0;
+ unsigned long flags;
+ struct irq_desc *desc = irq_desc + irq;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ if (desc->action)
+ rc = 1;
+ spin_unlock_irqrestore(&desc->lock, flags);
+ return rc;
+}
+
+/* ------------------------------------------------------- */
+/** eeh_report_error - report an EEH error to each device,
+ * collect up and merge the device responses.
+ */
+
+static void eeh_report_error(struct pci_dev *dev, void *userdata)
+{
+ enum pci_ers_result rc, *res = userdata;
+ struct pci_driver *driver = dev->driver;
+
+ dev->error_state = pci_channel_io_frozen;
+
+ if (!driver)
+ return;
+
+ if (irq_in_use (dev->irq)) {
+ struct device_node *dn = pci_device_to_OF_node(dev);
+ PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
+ disable_irq_nosync(dev->irq);
+ }
+ if (!driver->err_handler)
+ return;
+ if (!driver->err_handler->error_detected)
+ return;
+
+ rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen);
+ if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+ if (*res == PCI_ERS_RESULT_NEED_RESET) return;
+ if (*res == PCI_ERS_RESULT_DISCONNECT &&
+ rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
+}
+
+/** eeh_report_reset -- tell this device that the pci slot
+ * has been reset.
+ */
+
+static void eeh_report_reset(struct pci_dev *dev, void *userdata)
+{
+ struct pci_driver *driver = dev->driver;
+ struct device_node *dn = pci_device_to_OF_node(dev);
+
+ if (!driver)
+ return;
+
+ if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
+ PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
+ enable_irq(dev->irq);
+ }
+ if (!driver->err_handler)
+ return;
+ if (!driver->err_handler->slot_reset)
+ return;
+
+ driver->err_handler->slot_reset(dev);
+}
+
+static void eeh_report_resume(struct pci_dev *dev, void *userdata)
+{
+ struct pci_driver *driver = dev->driver;
+
+ dev->error_state = pci_channel_io_normal;
+
+ if (!driver)
+ return;
+ if (!driver->err_handler)
+ return;
+ if (!driver->err_handler->resume)
+ return;
+
+ driver->err_handler->resume(dev);
+}
+
+static void eeh_report_failure(struct pci_dev *dev, void *userdata)
+{
+ struct pci_driver *driver = dev->driver;
+
+ dev->error_state = pci_channel_io_perm_failure;
+
+ if (!driver)
+ return;
+
+ if (irq_in_use (dev->irq)) {
+ struct device_node *dn = pci_device_to_OF_node(dev);
+ PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
+ disable_irq_nosync(dev->irq);
+ }
+ if (!driver->err_handler)
+ return;
+ if (!driver->err_handler->error_detected)
+ return;
+ driver->err_handler->error_detected(dev, pci_channel_io_perm_failure);
+}
+
+/* ------------------------------------------------------- */
+/**
+ * handle_eeh_events -- reset a PCI device after hard lockup.
+ *
+ * pSeries systems will isolate a PCI slot if the PCI-Host
+ * bridge detects address or data parity errors, DMA's
+ * occuring to wild addresses (which usually happen due to
+ * bugs in device drivers or in PCI adapter firmware).
+ * Slot isolations also occur if #SERR, #PERR or other misc
+ * PCI-related errors are detected.
+ *
+ * Recovery process consists of unplugging the device driver
+ * (which generated hotplug events to userspace), then issuing
+ * a PCI #RST to the device, then reconfiguring the PCI config
+ * space for all bridges & devices under this slot, and then
+ * finally restarting the device drivers (which cause a second
+ * set of hotplug events to go out to userspace).
+ */
+
+/**
+ * eeh_reset_device() -- perform actual reset of a pci slot
+ * Args: bus: pointer to the pci bus structure corresponding
+ * to the isolated slot. A non-null value will
+ * cause all devices under the bus to be removed
+ * and then re-added.
+ * pe_dn: pointer to a "Partionable Endpoint" device node.
+ * This is the top-level structure on which pci
+ * bus resets can be performed.
+ */
+
+static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus)
+{
+ int rc;
+ if (bus)
+ pcibios_remove_pci_devices(bus);
+
+ /* Reset the pci controller. (Asserts RST#; resets config space).
+ * Reconfigure bridges and devices. Don't try to bring the system
+ * up if the reset failed for some reason. */
+ rc = rtas_set_slot_reset(pe_dn);
+ if (rc)
+ return rc;
+
+ /* New-style config addrs might be shared across multiple devices,
+ * Walk over all functions on this device */
+ if (pe_dn->eeh_pe_config_addr) {
+ struct device_node *pe = pe_dn->node;
+ pe = pe->parent->child;
+ while (pe) {
+ struct pci_dn *ppe = PCI_DN(pe);
+ if (pe_dn->eeh_pe_config_addr == ppe->eeh_pe_config_addr) {
+ rtas_configure_bridge(ppe);
+ eeh_restore_bars(ppe);
+ }
+ pe = pe->sibling;
+ }
+ } else {
+ rtas_configure_bridge(pe_dn);
+ eeh_restore_bars(pe_dn);
+ }
+
+ /* Give the system 5 seconds to finish running the user-space
+ * hotplug shutdown scripts, e.g. ifdown for ethernet. Yes,
+ * this is a hack, but if we don't do this, and try to bring
+ * the device up before the scripts have taken it down,
+ * potentially weird things happen.
+ */
+ if (bus) {
+ ssleep (5);
+ pcibios_add_pci_devices(bus);
+ }
+
+ return 0;
+}
+
+/* The longest amount of time to wait for a pci device
+ * to come back on line, in seconds.
+ */
+#define MAX_WAIT_FOR_RECOVERY 15
+
+void handle_eeh_events (struct eeh_event *event)
+{
+ struct device_node *frozen_dn;
+ struct pci_dn *frozen_pdn;
+ struct pci_bus *frozen_bus;
+ int rc = 0;
+ enum pci_ers_result result = PCI_ERS_RESULT_NONE;
+
+ frozen_dn = find_device_pe(event->dn);
+ frozen_bus = pcibios_find_pci_bus(frozen_dn);
+
+ if (!frozen_dn) {
+ printk(KERN_ERR "EEH: Error: Cannot find partition endpoint for %s\n",
+ pci_name(event->dev));
+ return;
+ }
+
+ /* There are two different styles for coming up with the PE.
+ * In the old style, it was the highest EEH-capable device
+ * which was always an EADS pci bridge. In the new style,
+ * there might not be any EADS bridges, and even when there are,
+ * the firmware marks them as "EEH incapable". So another
+ * two-step is needed to find the pci bus.. */
+ if (!frozen_bus)
+ frozen_bus = pcibios_find_pci_bus (frozen_dn->parent);
+
+ if (!frozen_bus) {
+ printk(KERN_ERR "EEH: Cannot find PCI bus for %s\n",
+ frozen_dn->full_name);
+ return;
+ }
+
+#if 0
+ /* We may get "permanent failure" messages on empty slots.
+ * These are false alarms. Empty slots have no child dn. */
+ if ((event->state == pci_channel_io_perm_failure) && (frozen_device == NULL))
+ return;
+#endif
+
+ frozen_pdn = PCI_DN(frozen_dn);
+ frozen_pdn->eeh_freeze_count++;
+
+ if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES)
+ goto hard_fail;
+
+ /* If the reset state is a '5' and the time to reset is 0 (infinity)
+ * or is more then 15 seconds, then mark this as a permanent failure.
+ */
+ if ((event->state == pci_channel_io_perm_failure) &&
+ ((event->time_unavail <= 0) ||
+ (event->time_unavail > MAX_WAIT_FOR_RECOVERY*1000)))
+ goto hard_fail;
+
+ eeh_slot_error_detail(frozen_pdn, 1 /* Temporary Error */);
+ printk(KERN_WARNING
+ "EEH: This PCI device has failed %d times since last reboot: %s - %s\n",
+ frozen_pdn->eeh_freeze_count,
+ pci_name (frozen_pdn->pcidev),
+ pcid_name(frozen_pdn->pcidev));
+
+ /* Walk the various device drivers attached to this slot through
+ * a reset sequence, giving each an opportunity to do what it needs
+ * to accomplish the reset. Each child gets a report of the
+ * status ... if any child can't handle the reset, then the entire
+ * slot is dlpar removed and added.
+ */
+ pci_walk_bus(frozen_bus, eeh_report_error, &result);
+
+ /* If all device drivers were EEH-unaware, then shut
+ * down all of the device drivers, and hope they
+ * go down willingly, without panicing the system.
+ */
+ if (result == PCI_ERS_RESULT_NONE) {
+ rc = eeh_reset_device(frozen_pdn, frozen_bus);
+ if (rc)
+ goto hard_fail;
+ }
+
+ /* If any device called out for a reset, then reset the slot */
+ if (result == PCI_ERS_RESULT_NEED_RESET) {
+ rc = eeh_reset_device(frozen_pdn, NULL);
+ if (rc)
+ goto hard_fail;
+ pci_walk_bus(frozen_bus, eeh_report_reset, 0);
+ }
+
+ /* If all devices reported they can proceed, the re-enable PIO */
+ if (result == PCI_ERS_RESULT_CAN_RECOVER) {
+ /* XXX Not supported; we brute-force reset the device */
+ rc = eeh_reset_device(frozen_pdn, NULL);
+ if (rc)
+ goto hard_fail;
+ pci_walk_bus(frozen_bus, eeh_report_reset, 0);
+ }
+
+ /* Tell all device drivers that they can resume operations */
+ pci_walk_bus(frozen_bus, eeh_report_resume, 0);
+
+ return;
+
+hard_fail:
+ /*
+ * About 90% of all real-life EEH failures in the field
+ * are due to poorly seated PCI cards. Only 10% or so are
+ * due to actual, failed cards.
+ */
+ printk(KERN_ERR
+ "EEH: PCI device %s - %s has failed %d times \n"
+ "and has been permanently disabled. Please try reseating\n"
+ "this device or replacing it.\n",
+ pci_name (frozen_pdn->pcidev),
+ pcid_name(frozen_pdn->pcidev),
+ frozen_pdn->eeh_freeze_count);
+
+ eeh_slot_error_detail(frozen_pdn, 2 /* Permanent Error */);
+
+ /* Notify all devices that they're about to go down. */
+ pci_walk_bus(frozen_bus, eeh_report_failure, 0);
+
+ /* Shut down the device drivers for good. */
+ pcibios_remove_pci_devices(frozen_bus);
+}
+
+/* ---------- end of file ---------- */
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index 9249733..9a9961f 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -21,6 +21,7 @@
#include <linux/list.h>
#include <linux/pci.h>
#include <asm/eeh_event.h>
+#include <asm/ppc-pci.h>
/** Overview:
* EEH error states may be detected within exception handlers;
@@ -37,31 +38,6 @@ static void eeh_thread_launcher(void *);
DECLARE_WORK(eeh_event_wq, eeh_thread_launcher, NULL);
/**
- * eeh_panic - call panic() for an eeh event that cannot be handled.
- * The philosophy of this routine is that it is better to panic and
- * halt the OS than it is to risk possible data corruption by
- * oblivious device drivers that don't know better.
- *
- * @dev pci device that had an eeh event
- * @reset_state current reset state of the device slot
- */
-static void eeh_panic(struct pci_dev *dev, int reset_state)
-{
- /*
- * Since the panic_on_oops sysctl is used to halt the system
- * in light of potential corruption, we can use it here.
- */
- if (panic_on_oops) {
- panic("EEH: MMIO failure (%d) on device:%s\n", reset_state,
- pci_name(dev));
- }
- else {
- printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n",
- reset_state, pci_name(dev));
- }
-}
-
-/**
* eeh_event_handler - dispatch EEH events. The detection of a frozen
* slot can occur inside an interrupt, where it can be hard to do
* anything about it. The goal of this routine is to pull these
@@ -82,10 +58,16 @@ static int eeh_event_handler(void * dummy)
spin_lock_irqsave(&eeh_eventlist_lock, flags);
event = NULL;
+
+ /* Unqueue the event, get ready to process. */
if (!list_empty(&eeh_eventlist)) {
event = list_entry(eeh_eventlist.next, struct eeh_event, list);
list_del(&event->list);
}
+
+ if (event)
+ eeh_mark_slot(event->dn, EEH_MODE_RECOVERING);
+
spin_unlock_irqrestore(&eeh_eventlist_lock, flags);
if (event == NULL)
break;
@@ -93,8 +75,11 @@ static int eeh_event_handler(void * dummy)
printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n",
pci_name(event->dev));
- eeh_panic (event->dev, event->state);
+ handle_eeh_events(event);
+
+ eeh_clear_slot(event->dn, EEH_MODE_RECOVERING);
+ pci_dev_put(event->dev);
kfree(event);
}
@@ -122,7 +107,7 @@ static void eeh_thread_launcher(void *dummy)
*/
int eeh_send_failure_event (struct device_node *dn,
struct pci_dev *dev,
- int state,
+ enum pci_channel_state state,
int time_unavail)
{
unsigned long flags;
OpenPOWER on IntegriCloud