powerpc: Merge xmon

The merged version follows the ppc64 version pretty closely mostly,
and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version.
The main difference for ppc64 is that the 'p' command to call
show_state (which was always pretty dodgy) has been replaced by
the ppc32 'p' command, which calls a given procedure (so in fact
the old 'p' command behaviour can be achieved with 'p $show_state').

Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 135 insertions, 0 deletions

diff --git a/arch/powerpc/xmon/setjmp.S b/arch/powerpc/xmon/setjmp.S
new file mode 100644
index 0000000..f8e40df
--- /dev/null
+++ b/arch/powerpc/xmon/setjmp.S
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 1996 Paul Mackerras.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ * NOTE: assert(sizeof(buf) > 23 * sizeof(long))
+ */
+#include <asm/processor.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+_GLOBAL(xmon_setjmp)
+	mflr	r0
+	STL	r0,0(r3)
+	STL	r1,SZL(r3)
+	STL	r2,2*SZL(r3)
+	mfcr	r0
+	STL	r0,3*SZL(r3)
+	STL	r13,4*SZL(r3)
+	STL	r14,5*SZL(r3)
+	STL	r15,6*SZL(r3)
+	STL	r16,7*SZL(r3)
+	STL	r17,8*SZL(r3)
+	STL	r18,9*SZL(r3)
+	STL	r19,10*SZL(r3)
+	STL	r20,11*SZL(r3)
+	STL	r21,12*SZL(r3)
+	STL	r22,13*SZL(r3)
+	STL	r23,14*SZL(r3)
+	STL	r24,15*SZL(r3)
+	STL	r25,16*SZL(r3)
+	STL	r26,17*SZL(r3)
+	STL	r27,18*SZL(r3)
+	STL	r28,19*SZL(r3)
+	STL	r29,20*SZL(r3)
+	STL	r30,21*SZL(r3)
+	STL	r31,22*SZL(r3)
+	li	r3,0
+	blr
+
+_GLOBAL(xmon_longjmp)
+	CMPI	r4,0
+	bne	1f
+	li	r4,1
+1:	LDL	r13,4*SZL(r3)
+	LDL	r14,5*SZL(r3)
+	LDL	r15,6*SZL(r3)
+	LDL	r16,7*SZL(r3)
+	LDL	r17,8*SZL(r3)
+	LDL	r18,9*SZL(r3)
+	LDL	r19,10*SZL(r3)
+	LDL	r20,11*SZL(r3)
+	LDL	r21,12*SZL(r3)
+	LDL	r22,13*SZL(r3)
+	LDL	r23,14*SZL(r3)
+	LDL	r24,15*SZL(r3)
+	LDL	r25,16*SZL(r3)
+	LDL	r26,17*SZL(r3)
+	LDL	r27,18*SZL(r3)
+	LDL	r28,19*SZL(r3)
+	LDL	r29,20*SZL(r3)
+	LDL	r30,21*SZL(r3)
+	LDL	r31,22*SZL(r3)
+	LDL	r0,3*SZL(r3)
+	mtcrf	0x38,r0
+	LDL	r0,0(r3)
+	LDL	r1,SZL(r3)
+	LDL	r2,2*SZL(r3)
+	mtlr	r0
+	mr	r3,r4
+	blr
+
+/*
+ * Grab the register values as they are now.
+ * This won't do a particularily good job because we really
+ * want our caller's caller's registers, and our caller has
+ * already executed its prologue.
+ * ToDo: We could reach back into the caller's save area to do
+ * a better job of representing the caller's state (note that
+ * that will be different for 32-bit and 64-bit, because of the
+ * different ABIs, though).
+ */
+_GLOBAL(xmon_save_regs)
+	STL	r0,0*SZL(r3)
+	STL	r2,2*SZL(r3)
+	STL	r3,3*SZL(r3)
+	STL	r4,4*SZL(r3)
+	STL	r5,5*SZL(r3)
+	STL	r6,6*SZL(r3)
+	STL	r7,7*SZL(r3)
+	STL	r8,8*SZL(r3)
+	STL	r9,9*SZL(r3)
+	STL	r10,10*SZL(r3)
+	STL	r11,11*SZL(r3)
+	STL	r12,12*SZL(r3)
+	STL	r13,13*SZL(r3)
+	STL	r14,14*SZL(r3)
+	STL	r15,15*SZL(r3)
+	STL	r16,16*SZL(r3)
+	STL	r17,17*SZL(r3)
+	STL	r18,18*SZL(r3)
+	STL	r19,19*SZL(r3)
+	STL	r20,20*SZL(r3)
+	STL	r21,21*SZL(r3)
+	STL	r22,22*SZL(r3)
+	STL	r23,23*SZL(r3)
+	STL	r24,24*SZL(r3)
+	STL	r25,25*SZL(r3)
+	STL	r26,26*SZL(r3)
+	STL	r27,27*SZL(r3)
+	STL	r28,28*SZL(r3)
+	STL	r29,29*SZL(r3)
+	STL	r30,30*SZL(r3)
+	STL	r31,31*SZL(r3)
+	/* go up one stack frame for SP */
+	LDL	r4,0(r1)
+	STL	r4,1*SZL(r3)
+	/* get caller's LR */
+	LDL	r0,LRSAVE(r4)
+	STL	r0,_NIP-STACK_FRAME_OVERHEAD(r3)
+	STL	r0,_LINK-STACK_FRAME_OVERHEAD(r3)
+	mfmsr	r0
+	STL	r0,_MSR-STACK_FRAME_OVERHEAD(r3)
+	mfctr	r0
+	STL	r0,_CTR-STACK_FRAME_OVERHEAD(r3)
+	mfxer	r0
+	STL	r0,_XER-STACK_FRAME_OVERHEAD(r3)
+	mfcr	r0
+	STL	r0,_CCR-STACK_FRAME_OVERHEAD(r3)
+	li	r0,0
+	STL	r0,_TRAP-STACK_FRAME_OVERHEAD(r3)
+	blr