POWERPC: Move generic cpm2 stuff to powerpc

This moves the cpm2 common code and PIC stuff to the powerpc. Most of the files
were just copied from ppc/, with minor tuning to make it compile, and, subsequently, work.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>

1 files changed, 256 insertions, 0 deletions

diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
new file mode 100644
index 0000000..c804475
--- /dev/null
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -0,0 +1,256 @@
+/*
+ * Platform information definitions.
+ *
+ * Copied from arch/ppc/syslib/cpm2_pic.c with minor subsequent updates
+ * to make in work in arch/powerpc/. Original (c) belongs to Dan Malek.
+ *
+ * Author:  Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * 1999-2001 (c) Dan Malek <dan@embeddedalley.com>
+ * 2006 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/* The CPM2 internal interrupt controller.  It is usually
+ * the only interrupt controller.
+ * There are two 32-bit registers (high/low) for up to 64
+ * possible interrupts.
+ *
+ * Now, the fun starts.....Interrupt Numbers DO NOT MAP
+ * in a simple arithmetic fashion to mask or pending registers.
+ * That is, interrupt 4 does not map to bit position 4.
+ * We create two tables, indexed by vector number, to indicate
+ * which register to use and which bit in the register to use.
+ */
+
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/irq.h>
+
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+
+#include "cpm2_pic.h"
+
+static struct device_node *cpm2_pic_node;
+static struct irq_host *cpm2_pic_host;
+#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
+static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+
+static const u_char irq_to_siureg[] = {
+	1, 1, 1, 1, 1, 1, 1, 1,
+	1, 1, 1, 1, 1, 1, 1, 1,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	1, 1, 1, 1, 1, 1, 1, 1,
+	1, 1, 1, 1, 1, 1, 1, 1,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/* bit numbers do not match the docs, these are precomputed so the bit for
+ * a given irq is (1 << irq_to_siubit[irq]) */
+static const u_char irq_to_siubit[] = {
+	 0, 15, 14, 13, 12, 11, 10,  9,
+	 8,  7,  6,  5,  4,  3,  2,  1,
+	 2,  1,  0, 14, 13, 12, 11, 10,
+	 9,  8,  7,  6,  5,  4,  3,  0,
+	31, 30, 29, 28, 27, 26, 25, 24,
+	23, 22, 21, 20, 19, 18, 17, 16,
+	16, 17, 18, 19, 20, 21, 22, 23,
+	24, 25, 26, 27, 28, 29, 30, 31,
+};
+
+static void cpm2_mask_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr;
+
+	irq_nr -= CPM_IRQ_OFFSET;
+
+	bit = irq_to_siubit[irq_nr];
+	word = irq_to_siureg[irq_nr];
+
+	simr = &(cpm2_immr->im_intctl.ic_simrh);
+	ppc_cached_irq_mask[word] &= ~(1 << bit);
+	simr[word] = ppc_cached_irq_mask[word];
+}
+
+static void cpm2_unmask_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr;
+
+	irq_nr -= CPM_IRQ_OFFSET;
+
+	bit = irq_to_siubit[irq_nr];
+	word = irq_to_siureg[irq_nr];
+
+	simr = &(cpm2_immr->im_intctl.ic_simrh);
+	ppc_cached_irq_mask[word] |= 1 << bit;
+	simr[word] = ppc_cached_irq_mask[word];
+}
+
+static void cpm2_mask_and_ack(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr, *sipnr;
+
+	irq_nr -= CPM_IRQ_OFFSET;
+
+	bit = irq_to_siubit[irq_nr];
+	word = irq_to_siureg[irq_nr];
+
+	simr = &(cpm2_immr->im_intctl.ic_simrh);
+	sipnr = &(cpm2_immr->im_intctl.ic_sipnrh);
+	ppc_cached_irq_mask[word] &= ~(1 << bit);
+	simr[word] = ppc_cached_irq_mask[word];
+	sipnr[word] = 1 << bit;
+}
+
+static void cpm2_end_irq(unsigned int irq_nr)
+{
+	int	bit, word;
+	volatile uint	*simr;
+
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+			&& irq_desc[irq_nr].action) {
+
+		irq_nr -= CPM_IRQ_OFFSET;
+		bit = irq_to_siubit[irq_nr];
+		word = irq_to_siureg[irq_nr];
+
+		simr = &(cpm2_immr->im_intctl.ic_simrh);
+		ppc_cached_irq_mask[word] |= 1 << bit;
+		simr[word] = ppc_cached_irq_mask[word];
+		/*
+		 * Work around large numbers of spurious IRQs on PowerPC 82xx
+		 * systems.
+		 */
+		mb();
+	}
+}
+
+static struct irq_chip cpm2_pic = {
+	.typename = " CPM2 SIU ",
+	.enable = cpm2_unmask_irq,
+	.disable = cpm2_mask_irq,
+	.unmask = cpm2_unmask_irq,
+	.mask_ack = cpm2_mask_and_ack,
+	.end = cpm2_end_irq,
+};
+
+int cpm2_get_irq(struct pt_regs *regs)
+{
+	int irq;
+	unsigned long bits;
+
+	/* For CPM2, read the SIVEC register and shift the bits down
+	 * to get the irq number.*/
+	bits = cpm2_immr->im_intctl.ic_sivec;
+	irq = bits >> 26;
+
+	if (irq == 0)
+		return(-1);
+	return irq+CPM_IRQ_OFFSET;
+}
+
+static int cpm2_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+	return cpm2_pic_node == NULL || cpm2_pic_node == node;
+}
+
+static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq,
+			  irq_hw_number_t hw)
+{
+	pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw);
+
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &cpm2_pic, handle_level_irq);
+	return 0;
+}
+
+static void cpm2_host_unmap(struct irq_host *h, unsigned int virq)
+{
+	/* Make sure irq is masked in hardware */
+	cpm2_mask_irq(virq);
+
+	/* remove chip and handler */
+	set_irq_chip_and_handler(virq, NULL, NULL);
+}
+
+static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct,
+			    u32 *intspec, unsigned int intsize,
+			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+	static const unsigned char map_cpm2_senses[4] = {
+		IRQ_TYPE_LEVEL_LOW,
+		IRQ_TYPE_LEVEL_HIGH,
+		IRQ_TYPE_EDGE_FALLING,
+		IRQ_TYPE_EDGE_RISING,
+	};
+
+	*out_hwirq = intspec[0];
+	if (intsize > 1 && intspec[1] < 4)
+		*out_flags = map_cpm2_senses[intspec[1]];
+	else
+		*out_flags = IRQ_TYPE_NONE;
+
+	return 0;
+}
+
+static struct irq_host_ops cpm2_pic_host_ops = {
+	.match = cpm2_pic_host_match,
+	.map = cpm2_pic_host_map,
+	.unmap = cpm2_host_unmap,
+	.xlate = cpm2_pic_host_xlate,
+};
+
+void cpm2_pic_init(struct device_node *node)
+{
+	int i;
+
+	/* Clear the CPM IRQ controller, in case it has any bits set
+	 * from the bootloader
+	 */
+
+	/* Mask out everything */
+
+	cpm2_immr->im_intctl.ic_simrh = 0x00000000;
+	cpm2_immr->im_intctl.ic_simrl = 0x00000000;
+
+	wmb();
+
+	/* Ack everything */
+	cpm2_immr->im_intctl.ic_sipnrh = 0xffffffff;
+	cpm2_immr->im_intctl.ic_sipnrl = 0xffffffff;
+	wmb();
+
+	/* Dummy read of the vector */
+	i = cpm2_immr->im_intctl.ic_sivec;
+	rmb();
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	cpm2_immr->im_intctl.ic_sicr = 0;
+	cpm2_immr->im_intctl.ic_scprrh = 0x05309770;
+	cpm2_immr->im_intctl.ic_scprrl = 0x05309770;
+
+	/* create a legacy host */
+	if (node)
+		cpm2_pic_node = of_node_get(node);
+
+	cpm2_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 64, &cpm2_pic_host_ops, 64);
+	if (cpm2_pic_host == NULL) {
+		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
+		return;
+	}
+}