Merge branch 'kconfig' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.22

6 files changed, 99 insertions, 129 deletions

diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 4110716..de7fce9 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -1,56 +1,36 @@
-menu "Platform support"
-       depends on PPC_82xx
-
 choice
-       prompt "Machine Type"
-       default MPC82xx_ADS
+	prompt "Machine Type"
+	depends on PPC_82xx
+	default MPC82xx_ADS
 
 config MPC82xx_ADS
-       bool "Freescale MPC82xx ADS"
-       select DEFAULT_UIMAGE
-       select PQ2ADS
-       select 8272
-       select 8260
-       select CPM2
-       select FSL_SOC
-       help
-         This option enables support for the MPC8272 ADS board
+	bool "Freescale MPC82xx ADS"
+	select DEFAULT_UIMAGE
+	select PQ2ADS
+	select 8272
+	select 8260
+	select FSL_SOC
+	help
+	This option enables support for the MPC8272 ADS board
 
 endchoice
 
 config PQ2ADS
 	bool
-	depends on ADS8272
-	default y
-
-config ADS8272
-	bool
+	default n
 
 config 8260
-	bool "CPM2 Support" if WILLOW
+	bool
 	depends on 6xx
-	default y if PQ2FADS
+	select CPM2
 	help
-	  The MPC8260 is a typical embedded CPU made by Motorola.  Selecting
+	  The MPC8260 is a typical embedded CPU made by Freescale.  Selecting
 	  this option means that you wish to build a kernel for a machine with
 	  an 8260 class CPU.
 
 config 8272
 	bool
-	depends on 6xx
-	default y if ADS8272
 	select 8260
 	help
 	  The MPC8272 CPM has a different internal dpram setup than other CPM2
 	  devices
-
-config CPM2
-	bool
-	depends on 8260 || MPC8560 || MPC8555
-	default y
-	help
-	  The CPM2 (Communications Processor Module) is a coprocessor on
-	  embedded CPUs made by Motorola.  Selecting this option means that
-	  you wish to build a kernel for a machine with a CPM2 coprocessor
-	  on it (826x, 827x, 8560).
-endmenu
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 2a23392..19cafdf 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -1,8 +1,6 @@
-menu "Platform support"
-	depends on PPC_83xx
-
 choice
 	prompt "Machine Type"
+	depends on PPC_83xx
 	default MPC834x_MDS
 
 config MPC8313_RDB
@@ -77,5 +75,3 @@ config PPC_MPC836x
 	select PPC_UDBG_16550
 	select PPC_INDIRECT_PCI
 	default y if MPC836x_MDS
-
-endmenu
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 329fcd4..629926e 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -1,8 +1,6 @@
-menu "Platform support"
-	depends on PPC_85xx
-
 choice
 	prompt "Machine Type"
+	depends on PPC_85xx
 	default MPC8540_ADS
 
 config MPC8540_ADS
@@ -46,34 +44,15 @@ config MPC8540
 
 config MPC8560
 	bool
-	select PPC_INDIRECT_PCI
+	select CPM2
 	default y if MPC8560_ADS
 
 config MPC85xx
 	bool
 	select PPC_UDBG_16550
 	select PPC_INDIRECT_PCI
+	select PPC_INDIRECT_PCI_BE
+	select MPIC
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
 	default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS \
 		|| MPC85xx_MDS || MPC8544_DS
-
-config PPC_INDIRECT_PCI_BE
-	bool
-	depends on PPC_85xx
-	default y
-
-config MPIC
-	bool
-	default y
-
-config CPM2
-	bool
-	depends on MPC8560
-	default y
-	help
-	  The CPM2 (Communications Processor Module) is a coprocessor on
-	  embedded CPUs made by Motorola.  Selecting this option means that
-	  you wish to build a kernel for a machine with a CPM2 coprocessor
-	  on it.
-
-endmenu
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 0c70944..d1bcff5 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -1,8 +1,6 @@
-menu "Platform Support"
-	depends on PPC_86xx
-
 choice
 	prompt "Machine Type"
+	depends on PPC_86xx
 	default MPC8641_HPCN
 
 config MPC8641_HPCN
@@ -14,20 +12,10 @@ config MPC8641_HPCN
 
 endchoice
 
-
 config MPC8641
 	bool
 	select PPC_INDIRECT_PCI
+	select PPC_INDIRECT_PCI_BE
 	select PPC_UDBG_16550
+	select MPIC
 	default y if MPC8641_HPCN
-
-config MPIC
-	bool
-	default y
-
-config PPC_INDIRECT_PCI_BE
-	bool
-	depends on PPC_86xx
-	default y
-
-endmenu
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index beea683..39bb8c5 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -1,6 +1,3 @@
-menu "Platform support"
-        depends on PPC_8xx
-
 config FADS
 	bool
 
@@ -9,6 +6,7 @@ config CPM1
 
 choice
 	prompt "8xx Machine Type"
+	depends on PPC_8xx
 	depends on 8xx
 	default MPC885ADS
 
@@ -36,38 +34,36 @@ config MPC885ADS
 endchoice
 
 menu "Freescale Ethernet driver platform-specific options"
-        depends on (FS_ENET && MPC885ADS)
-
-        config MPC8xx_SECOND_ETH
-        bool "Second Ethernet channel"
-        depends on MPC885ADS
-        default y
-        help
-          This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
-          The latter will use SCC1, for 885ADS you can select it below.
-
-        choice
-                prompt "Second Ethernet channel"
-                depends on MPC8xx_SECOND_ETH
-                default MPC8xx_SECOND_ETH_FEC2
-
-                config MPC8xx_SECOND_ETH_FEC2
-                bool "FEC2"
-                depends on MPC885ADS
-                help
-                  Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
-                  (often 2-nd UART) will not work if this is enabled.
-
-                config MPC8xx_SECOND_ETH_SCC3
-                bool "SCC3"
-                depends on MPC885ADS
-                help
-                  Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
-                  (often 1-nd UART) will not work if this is enabled.
-
-        endchoice
+	depends on (FS_ENET && MPC885ADS)
 
-endmenu
+	config MPC8xx_SECOND_ETH
+	bool "Second Ethernet channel"
+	depends on MPC885ADS
+	default y
+	help
+	  This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
+	  The latter will use SCC1, for 885ADS you can select it below.
+
+	choice
+		prompt "Second Ethernet channel"
+		depends on MPC8xx_SECOND_ETH
+		default MPC8xx_SECOND_ETH_FEC2
+
+		config MPC8xx_SECOND_ETH_FEC2
+		bool "FEC2"
+		depends on MPC885ADS
+		help
+		  Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
+		  (often 2-nd UART) will not work if this is enabled.
+
+		config MPC8xx_SECOND_ETH_SCC3
+		bool "SCC3"
+		depends on MPC885ADS
+		help
+		  Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
+		  (often 1-nd UART) will not work if this is enabled.
+
+	endchoice
 
 endmenu
 
@@ -98,7 +94,7 @@ config 8xx_CPU6
 	  require workarounds for Linux (and most other OSes to work).  If you
 	  get a BUG() very early in boot, this might fix the problem.  For
 	  more details read the document entitled "MPC860 Family Device Errata
-	  Reference" on Motorola's website.  This option also incurs a
+	  Reference" on Freescale's website.  This option also incurs a
 	  performance hit.
 
 	  If in doubt, say N here.
@@ -135,4 +131,3 @@ config UCODE_PATCH
 	depends on !NO_UCODE_PATCH
 
 endmenu
-
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 161ab79..86be82a 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -1,8 +1,8 @@
 menu "Platform support"
-	depends on PPC64 || CLASSIC32
 
 choice
 	prompt "Machine type"
+	depends on PPC64 || CLASSIC32
 	default PPC_MULTIPLATFORM
 
 config PPC_MULTIPLATFORM
@@ -25,14 +25,6 @@ config APUS
 	  <http://linux-apus.sourceforge.net/>.
 endchoice
 
-config QUICC_ENGINE
-	bool
-	help
-	  The QUICC Engine (QE) is a new generation of communications
-	  coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
-	  Selecting this option means that you wish to build a kernel
-	  for a machine with a QE coprocessor.
-
 source "arch/powerpc/platforms/pseries/Kconfig"
 source "arch/powerpc/platforms/iseries/Kconfig"
 source "arch/powerpc/platforms/chrp/Kconfig"
@@ -41,9 +33,16 @@ source "arch/powerpc/platforms/powermac/Kconfig"
 source "arch/powerpc/platforms/prep/Kconfig"
 source "arch/powerpc/platforms/maple/Kconfig"
 source "arch/powerpc/platforms/pasemi/Kconfig"
-source arch/powerpc/platforms/celleb/Kconfig
-source arch/powerpc/platforms/ps3/Kconfig
-source arch/powerpc/platforms/cell/Kconfig
+source "arch/powerpc/platforms/celleb/Kconfig"
+source "arch/powerpc/platforms/ps3/Kconfig"
+source "arch/powerpc/platforms/cell/Kconfig"
+source "arch/powerpc/platforms/8xx/Kconfig"
+source "arch/powerpc/platforms/82xx/Kconfig"
+source "arch/powerpc/platforms/83xx/Kconfig"
+source "arch/powerpc/platforms/85xx/Kconfig"
+source "arch/powerpc/platforms/86xx/Kconfig"
+source "arch/powerpc/platforms/embedded6xx/Kconfig"
+#source "arch/powerpc/platforms/4xx/Kconfig
 
 config PPC_NATIVE
 	bool
@@ -68,6 +67,18 @@ config XICS
 	bool
 	default y
 
+config MPIC
+	bool
+	default n
+
+config MPIC_WEIRD
+	bool
+	default n
+
+config PPC_I8259
+	bool
+	default n
+
 config U3_DART
 	bool
 	depends on PPC_MULTIPLATFORM && PPC64
@@ -137,6 +148,9 @@ config GENERIC_IOMAP
 	bool
 	default n
 
+menu "CPU Frequency support"
+	depends on PPC64 || CLASSIC32
+
 source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_PMAC
@@ -155,6 +169,7 @@ config CPU_FREQ_PMAC64
 	help
 	  This adds support for frequency switching on Apple iMac G5,
 	  and some of the more recent desktop G5 machines as well.
+endmenu
 
 config PPC601_SYNC_FIX
 	bool "Workarounds for PPC601 bugs"
@@ -172,7 +187,7 @@ config PPC601_SYNC_FIX
 
 config TAU
 	bool "On-chip CPU temperature sensor support"
-	depends on 6xx
+	depends on CLASSIC32
 	help
 	  G3 and G4 processors have an on-chip temperature sensor called the
 	  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
@@ -214,4 +229,21 @@ config TAU_AVERAGE
 
 	  If in doubt, say N here.
 
+config QUICC_ENGINE
+	bool
+	help
+	  The QUICC Engine (QE) is a new generation of communications
+	  coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
+	  Selecting this option means that you wish to build a kernel
+	  for a machine with a QE coprocessor.
+
+config CPM2
+	bool
+	default n
+	help
+	  The CPM2 (Communications Processor Module) is a coprocessor on
+	  embedded CPUs made by Freescale.  Selecting this option means that
+	  you wish to build a kernel for a machine with a CPM2 coprocessor
+	  on it (826x, 827x, 8560).
+
 endmenu