Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits)
  [POWERPC] Add memchr() to the bootwrapper
  [POWERPC] Implement logging of unhandled signals
  [POWERPC] Add legacy serial support for OPB with flattened device tree
  [POWERPC] Use 1TB segments
  [POWERPC] XilinxFB: Allow fixed framebuffer base address
  [POWERPC] XilinxFB: Add support for custom screen resolution
  [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters
  [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci
  [POWERPC] 4xx: Kilauea defconfig file
  [POWERPC] 4xx: Kilauea DTS
  [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x
  [POWERPC] 4xx: Add AMCC 405EX support to cputable.c
  [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable
  [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers
  [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig
  [POWERPC] 85xx: Killed <asm/mpc85xx.h>
  [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS
  [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.
  [POWERPC] mpc8272ads: Remove muram from the CPM reg property.
  [POWERPC] Make clockevents work on PPC601 processors
  ...

Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.

1 files changed, 0 insertions, 42 deletions

diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h
index 7c31aec..a507666 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads.h
+++ b/arch/powerpc/platforms/8xx/mpc885ads.h
@@ -15,31 +15,12 @@
 #ifndef __ASM_MPC885ADS_H__
 #define __ASM_MPC885ADS_H__
 
-#include <asm/ppcboot.h>
 #include <sysdev/fsl_soc.h>
 
-/* U-Boot maps BCSR to 0xff080000 */
-#define BCSR_ADDR		((uint)0xff080000)
-#define BCSR_SIZE		((uint)32)
-#define BCSR0			((uint)(BCSR_ADDR + 0x00))
-#define BCSR1			((uint)(BCSR_ADDR + 0x04))
-#define BCSR2			((uint)(BCSR_ADDR + 0x08))
-#define BCSR3			((uint)(BCSR_ADDR + 0x0c))
-#define BCSR4			((uint)(BCSR_ADDR + 0x10))
-
-#define CFG_PHYDEV_ADDR		((uint)0xff0a0000)
-#define BCSR5			((uint)(CFG_PHYDEV_ADDR + 0x300))
-
-#define IMAP_ADDR		(get_immrbase())
-#define IMAP_SIZE		((uint)(64 * 1024))
-
 #define MPC8xx_CPM_OFFSET	(0x9c0)
 #define CPM_MAP_ADDR		(get_immrbase() + MPC8xx_CPM_OFFSET)
 #define CPM_IRQ_OFFSET		16     // for compability with cpm_uart driver
 
-#define PCMCIA_MEM_ADDR		((uint)0xff020000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-
 /* Bits of interest in the BCSRs.
  */
 #define BCSR1_ETHEN		((uint)0x20000000)
@@ -68,28 +49,5 @@
 #define BCSR5_MII1_EN		0x02
 #define BCSR5_MII1_RST		0x01
 
-/* Interrupt level assignments */
-#define PHY_INTERRUPT	SIU_IRQ7	/* PHY link change interrupt */
-#define SIU_INT_FEC1	SIU_LEVEL1	/* FEC1 interrupt */
-#define SIU_INT_FEC2	SIU_LEVEL3	/* FEC2 interrupt */
-#define FEC_INTERRUPT	SIU_INT_FEC1	/* FEC interrupt */
-
-/* We don't use the 8259 */
-#define NR_8259_INTS	0
-
-/* CPM Ethernet through SCC3 */
-#define PA_ENET_RXD	((ushort)0x0040)
-#define PA_ENET_TXD	((ushort)0x0080)
-#define PE_ENET_TCLK	((uint)0x00004000)
-#define PE_ENET_RCLK	((uint)0x00008000)
-#define PE_ENET_TENA	((uint)0x00000010)
-#define PC_ENET_CLSN	((ushort)0x0400)
-#define PC_ENET_RENA	((ushort)0x0800)
-
-/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to
- * SCC3.  Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */
-#define SICR_ENET_MASK	((uint)0x00ff0000)
-#define SICR_ENET_CLKRT	((uint)0x002c0000)
-
 #endif /* __ASM_MPC885ADS_H__ */
 #endif /* __KERNEL__ */