summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/mm/slb.c
diff options
context:
space:
mode:
authorPaul Mackerras <paulus@samba.org>2007-08-10 21:04:07 +1000
committerPaul Mackerras <paulus@samba.org>2007-08-10 21:04:07 +1000
commitedd0622bd2e8f755c960827e15aa6908c3c5aa94 (patch)
treea53acb20f1d326ff736d45ecda66a848604a65b2 /arch/powerpc/mm/slb.c
parentac07860264bd2b18834d3fa3be47032115524cea (diff)
downloadop-kernel-dev-edd0622bd2e8f755c960827e15aa6908c3c5aa94.zip
op-kernel-dev-edd0622bd2e8f755c960827e15aa6908c3c5aa94.tar.gz
[POWERPC] Fix potential duplicate entry in SLB shadow buffer
We were getting a duplicate entry in the SLB shadow buffer in slb_flush_and_rebolt() if the kernel stack was in the same segment as PAGE_OFFSET, which on POWER6 causes the hypervisor to terminate the partition with an error. This fixes it. Also we were not creating an SLB entry (or an SLB shadow buffer entry) for the kernel stack on secondary CPUs when starting the CPU. This isn't a major problem, since an appropriate entry will be created on demand, but this fixes that also for consistency. Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/powerpc/mm/slb.c')
-rw-r--r--arch/powerpc/mm/slb.c45
1 files changed, 16 insertions, 29 deletions
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index b069701..a73d2d7 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -69,20 +69,9 @@ static inline void slb_shadow_update(unsigned long ea,
smp_wmb();
}
-static inline void create_shadowed_slbe(unsigned long ea, unsigned long flags,
- unsigned long entry)
+static inline void slb_shadow_clear(unsigned long entry)
{
- /*
- * Updating the shadow buffer before writing the SLB ensures
- * we don't get a stale entry here if we get preempted by PHYP
- * between these two statements.
- */
- slb_shadow_update(ea, flags, entry);
-
- asm volatile("slbmte %0,%1" :
- : "r" (mk_vsid_data(ea, flags)),
- "r" (mk_esid_data(ea, entry))
- : "memory" );
+ get_slb_shadow()->save_area[entry].esid = 0;
}
void slb_flush_and_rebolt(void)
@@ -100,11 +89,13 @@ void slb_flush_and_rebolt(void)
vflags = SLB_VSID_KERNEL | vmalloc_llp;
ksp_esid_data = mk_esid_data(get_paca()->kstack, 2);
- if ((ksp_esid_data & ESID_MASK) == PAGE_OFFSET)
+ if ((ksp_esid_data & ESID_MASK) == PAGE_OFFSET) {
ksp_esid_data &= ~SLB_ESID_V;
-
- /* Only third entry (stack) may change here so only resave that */
- slb_shadow_update(get_paca()->kstack, lflags, 2);
+ slb_shadow_clear(2);
+ } else {
+ /* Update stack entry; others don't change */
+ slb_shadow_update(get_paca()->kstack, lflags, 2);
+ }
/* We need to do this all in asm, so we're sure we don't touch
* the stack between the slbia and rebolting it. */
@@ -235,16 +226,12 @@ void slb_initialize(void)
vflags = SLB_VSID_KERNEL | vmalloc_llp;
/* Invalidate the entire SLB (even slot 0) & all the ERATS */
- asm volatile("isync":::"memory");
- asm volatile("slbmte %0,%0"::"r" (0) : "memory");
- asm volatile("isync; slbia; isync":::"memory");
- create_shadowed_slbe(PAGE_OFFSET, lflags, 0);
-
- create_shadowed_slbe(VMALLOC_START, vflags, 1);
-
- /* We don't bolt the stack for the time being - we're in boot,
- * so the stack is in the bolted segment. By the time it goes
- * elsewhere, we'll call _switch() which will bolt in the new
- * one. */
- asm volatile("isync":::"memory");
+ slb_shadow_update(PAGE_OFFSET, lflags, 0);
+ asm volatile("isync; slbia; sync; slbmte %0,%1; isync" ::
+ "r" (get_slb_shadow()->save_area[0].vsid),
+ "r" (get_slb_shadow()->save_area[0].esid) : "memory");
+
+ slb_shadow_update(VMALLOC_START, vflags, 1);
+
+ slb_flush_and_rebolt();
}
OpenPOWER on IntegriCloud