powerpc: Fix checkstop in native_hpte_clear() with lockdep

native_hpte_clear() is called in real mode from two places:
- Early in boot during htab initialisation if firmware assisted dump is
  active.
- Late in the kexec path.

In both contexts there is no need to disable interrupts are they are
already disabled. Furthermore, locking around the tlbie() is only required
for pre POWER5 hardware.

On POWER5 or newer hardware concurrent tlbie()s work as expected and on pre
POWER5 hardware concurrent tlbie()s could result in deadlock. This code
would only be executed at crashdump time, during which all bets are off,
concurrent tlbie()s are unlikely and taking locks is unsafe therefore the
best course of action is to simply do nothing. Concurrent tlbie()s are not
possible in the first case as secondary CPUs have not come up yet.

Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1 files changed, 11 insertions, 12 deletions

diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index 13befa35..c8822af 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -582,13 +582,21 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
  * be when they isi), and we are the only one left.  We rely on our kernel
  * mapping being 0xC0's and the hardware ignoring those two real bits.
  *
+ * This must be called with interrupts disabled.
+ *
+ * Taking the native_tlbie_lock is unsafe here due to the possibility of
+ * lockdep being on. On pre POWER5 hardware, not taking the lock could
+ * cause deadlock. POWER5 and newer not taking the lock is fine. This only
+ * gets called during boot before secondary CPUs have come up and during
+ * crashdump and all bets are off anyway.
+ *
  * TODO: add batching support when enabled.  remember, no dynamic memory here,
  * athough there is the control page available...
  */
 static void native_hpte_clear(void)
 {
 	unsigned long vpn = 0;
-	unsigned long slot, slots, flags;
+	unsigned long slot, slots;
 	struct hash_pte *hptep = htab_address;
 	unsigned long hpte_v;
 	unsigned long pteg_count;
@@ -596,13 +604,6 @@ static void native_hpte_clear(void)
 
 	pteg_count = htab_hash_mask + 1;
 
-	local_irq_save(flags);
-
-	/* we take the tlbie lock and hold it.  Some hardware will
-	 * deadlock if we try to tlbie from two processors at once.
-	 */
-	raw_spin_lock(&native_tlbie_lock);
-
 	slots = pteg_count * HPTES_PER_GROUP;
 
 	for (slot = 0; slot < slots; slot++, hptep++) {
@@ -614,8 +615,8 @@ static void native_hpte_clear(void)
 		hpte_v = be64_to_cpu(hptep->v);
 
 		/*
-		 * Call __tlbie() here rather than tlbie() since we
-		 * already hold the native_tlbie_lock.
+		 * Call __tlbie() here rather than tlbie() since we can't take the
+		 * native_tlbie_lock.
 		 */
 		if (hpte_v & HPTE_V_VALID) {
 			hpte_decode(hptep, slot, &psize, &apsize, &ssize, &vpn);
@@ -625,8 +626,6 @@ static void native_hpte_clear(void)
 	}
 
 	asm volatile("eieio; tlbsync; ptesync":::"memory");
-	raw_spin_unlock(&native_tlbie_lock);
-	local_irq_restore(flags);
 }
 
 /*