powerpc/pci: move pci_64.c device tree scanning code into pci-common.c

The PCI device tree scanning code in pci_64.c is some useful functionality.
It allows PCI devices to be described in the device tree instead of being
probed for, which in turn allows pci devices to use all of the device tree
facilities to describe complex PCI bus architectures like GPIO and IRQ
routing (perhaps not a common situation for desktop or server systems,
but useful for embedded systems with on-board PCI devices).

This patch moves the device tree scanning into pci-common.c so it is
available for 32-bit powerpc machines too.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

1 files changed, 0 insertions, 289 deletions

diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 9e8902f..4d5b4ced 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -43,295 +43,6 @@ unsigned long pci_probe_only = 1;
 unsigned long pci_io_base = ISA_IO_BASE;
 EXPORT_SYMBOL(pci_io_base);
 
-static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
-{
-	const u32 *prop;
-	int len;
-
-	prop = of_get_property(np, name, &len);
-	if (prop && len >= 4)
-		return *prop;
-	return def;
-}
-
-static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
-{
-	unsigned int flags = 0;
-
-	if (addr0 & 0x02000000) {
-		flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
-		flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
-		flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
-		if (addr0 & 0x40000000)
-			flags |= IORESOURCE_PREFETCH
-				 | PCI_BASE_ADDRESS_MEM_PREFETCH;
-		/* Note: We don't know whether the ROM has been left enabled
-		 * by the firmware or not. We mark it as disabled (ie, we do
-		 * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
-		 * do a config space read, it will be force-enabled if needed
-		 */
-		if (!bridge && (addr0 & 0xff) == 0x30)
-			flags |= IORESOURCE_READONLY;
-	} else if (addr0 & 0x01000000)
-		flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
-	if (flags)
-		flags |= IORESOURCE_SIZEALIGN;
-	return flags;
-}
-
-
-static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
-{
-	u64 base, size;
-	unsigned int flags;
-	struct resource *res;
-	const u32 *addrs;
-	u32 i;
-	int proplen;
-
-	addrs = of_get_property(node, "assigned-addresses", &proplen);
-	if (!addrs)
-		return;
-	pr_debug("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
-	for (; proplen >= 20; proplen -= 20, addrs += 5) {
-		flags = pci_parse_of_flags(addrs[0], 0);
-		if (!flags)
-			continue;
-		base = of_read_number(&addrs[1], 2);
-		size = of_read_number(&addrs[3], 2);
-		if (!size)
-			continue;
-		i = addrs[0] & 0xff;
-		pr_debug("  base: %llx, size: %llx, i: %x\n",
-			 (unsigned long long)base,
-			 (unsigned long long)size, i);
-
-		if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
-			res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
-		} else if (i == dev->rom_base_reg) {
-			res = &dev->resource[PCI_ROM_RESOURCE];
-			flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
-		} else {
-			printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
-			continue;
-		}
-		res->start = base;
-		res->end = base + size - 1;
-		res->flags = flags;
-		res->name = pci_name(dev);
-	}
-}
-
-struct pci_dev *of_create_pci_dev(struct device_node *node,
-				 struct pci_bus *bus, int devfn)
-{
-	struct pci_dev *dev;
-	const char *type;
-
-	dev = alloc_pci_dev();
-	if (!dev)
-		return NULL;
-	type = of_get_property(node, "device_type", NULL);
-	if (type == NULL)
-		type = "";
-
-	pr_debug("    create device, devfn: %x, type: %s\n", devfn, type);
-
-	dev->bus = bus;
-	dev->sysdata = node;
-	dev->dev.parent = bus->bridge;
-	dev->dev.bus = &pci_bus_type;
-	dev->devfn = devfn;
-	dev->multifunction = 0;		/* maybe a lie? */
-
-	dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
-	dev->device = get_int_prop(node, "device-id", 0xffff);
-	dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
-	dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
-
-	dev->cfg_size = pci_cfg_space_size(dev);
-
-	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
-		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
-	dev->class = get_int_prop(node, "class-code", 0);
-	dev->revision = get_int_prop(node, "revision-id", 0);
-
-	pr_debug("    class: 0x%x\n", dev->class);
-	pr_debug("    revision: 0x%x\n", dev->revision);
-
-	dev->current_state = 4;		/* unknown power state */
-	dev->error_state = pci_channel_io_normal;
-	dev->dma_mask = 0xffffffff;
-
-	if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
-		/* a PCI-PCI bridge */
-		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
-		dev->rom_base_reg = PCI_ROM_ADDRESS1;
-	} else if (!strcmp(type, "cardbus")) {
-		dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
-	} else {
-		dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
-		dev->rom_base_reg = PCI_ROM_ADDRESS;
-		/* Maybe do a default OF mapping here */
-		dev->irq = NO_IRQ;
-	}
-
-	pci_parse_of_addrs(node, dev);
-
-	pr_debug("    adding to system ...\n");
-
-	pci_device_add(dev, bus);
-
-	return dev;
-}
-EXPORT_SYMBOL(of_create_pci_dev);
-
-static void __devinit __of_scan_bus(struct device_node *node,
-				    struct pci_bus *bus, int rescan_existing)
-{
-	struct device_node *child;
-	const u32 *reg;
-	int reglen, devfn;
-	struct pci_dev *dev;
-
-	pr_debug("of_scan_bus(%s) bus no %d... \n",
-		 node->full_name, bus->number);
-
-	/* Scan direct children */
-	for_each_child_of_node(node, child) {
-		pr_debug("  * %s\n", child->full_name);
-		reg = of_get_property(child, "reg", &reglen);
-		if (reg == NULL || reglen < 20)
-			continue;
-		devfn = (reg[0] >> 8) & 0xff;
-
-		/* create a new pci_dev for this device */
-		dev = of_create_pci_dev(child, bus, devfn);
-		if (!dev)
-			continue;
-		pr_debug("    dev header type: %x\n", dev->hdr_type);
-	}
-
-	/* Apply all fixups necessary. We don't fixup the bus "self"
-	 * for an existing bridge that is being rescanned
-	 */
-	if (!rescan_existing)
-		pcibios_setup_bus_self(bus);
-	pcibios_setup_bus_devices(bus);
-
-	/* Now scan child busses */
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
-		    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
-			struct device_node *child = pci_device_to_OF_node(dev);
-			if (dev)
-				of_scan_pci_bridge(child, dev);
-		}
-	}
-}
-
-void __devinit of_scan_bus(struct device_node *node,
-			   struct pci_bus *bus)
-{
-	__of_scan_bus(node, bus, 0);
-}
-EXPORT_SYMBOL_GPL(of_scan_bus);
-
-void __devinit of_rescan_bus(struct device_node *node,
-			     struct pci_bus *bus)
-{
-	__of_scan_bus(node, bus, 1);
-}
-EXPORT_SYMBOL_GPL(of_rescan_bus);
-
-void __devinit of_scan_pci_bridge(struct device_node *node,
-				  struct pci_dev *dev)
-{
-	struct pci_bus *bus;
-	const u32 *busrange, *ranges;
-	int len, i, mode;
-	struct resource *res;
-	unsigned int flags;
-	u64 size;
-
-	pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
-
-	/* parse bus-range property */
-	busrange = of_get_property(node, "bus-range", &len);
-	if (busrange == NULL || len != 8) {
-		printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
-		       node->full_name);
-		return;
-	}
-	ranges = of_get_property(node, "ranges", &len);
-	if (ranges == NULL) {
-		printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
-		       node->full_name);
-		return;
-	}
-
-	bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
-	if (!bus) {
-		printk(KERN_ERR "Failed to create pci bus for %s\n",
-		       node->full_name);
-		return;
-	}
-
-	bus->primary = dev->bus->number;
-	bus->subordinate = busrange[1];
-	bus->bridge_ctl = 0;
-	bus->sysdata = node;
-
-	/* parse ranges property */
-	/* PCI #address-cells == 3 and #size-cells == 2 always */
-	res = &dev->resource[PCI_BRIDGE_RESOURCES];
-	for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
-		res->flags = 0;
-		bus->resource[i] = res;
-		++res;
-	}
-	i = 1;
-	for (; len >= 32; len -= 32, ranges += 8) {
-		flags = pci_parse_of_flags(ranges[0], 1);
-		size = of_read_number(&ranges[6], 2);
-		if (flags == 0 || size == 0)
-			continue;
-		if (flags & IORESOURCE_IO) {
-			res = bus->resource[0];
-			if (res->flags) {
-				printk(KERN_ERR "PCI: ignoring extra I/O range"
-				       " for bridge %s\n", node->full_name);
-				continue;
-			}
-		} else {
-			if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
-				printk(KERN_ERR "PCI: too many memory ranges"
-				       " for bridge %s\n", node->full_name);
-				continue;
-			}
-			res = bus->resource[i];
-			++i;
-		}
-		res->start = of_read_number(&ranges[1], 2);
-		res->end = res->start + size - 1;
-		res->flags = flags;
-	}
-	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
-		bus->number);
-	pr_debug("    bus name: %s\n", bus->name);
-
-	mode = PCI_PROBE_NORMAL;
-	if (ppc_md.pci_probe_mode)
-		mode = ppc_md.pci_probe_mode(bus);
-	pr_debug("    probe mode: %d\n", mode);
-
-	if (mode == PCI_PROBE_DEVTREE)
-		of_scan_bus(node, bus);
-	else if (mode == PCI_PROBE_NORMAL)
-		pci_scan_child_bus(bus);
-}
-EXPORT_SYMBOL(of_scan_pci_bridge);
-
 void __devinit scan_phb(struct pci_controller *hose)
 {
 	struct pci_bus *bus;