Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc merge from Benjamin Herrenschmidt:
 "Here's the powerpc batch for this merge window.  It is going to be a
  bit more nasty than usual as in touching things outside of
  arch/powerpc mostly due to the big iSeriesectomy :-) We finally got
  rid of the bugger (legacy iSeries support) which was a PITA to
  maintain and that nobody really used anymore.

  Here are some of the highlights:

   - Legacy iSeries is gone.  Thanks Stephen ! There's still some bits
     and pieces remaining if you do a grep -ir series arch/powerpc but
     they are harmless and will be removed in the next few weeks
     hopefully.

   - The 'fadump' functionality (Firmware Assisted Dump) replaces the
     previous (equivalent) "pHyp assisted dump"...  it's a rewrite of a
     mechanism to get the hypervisor to do crash dumps on pSeries, the
     new implementation hopefully being much more reliable.  Thanks
     Mahesh Salgaonkar.

   - The "EEH" code (pSeries PCI error handling & recovery) got a big
     spring cleaning, motivated by the need to be able to implement a
     new backend for it on top of some new different type of firwmare.

     The work isn't complete yet, but a good chunk of the cleanups is
     there.  Note that this adds a field to struct device_node which is
     not very nice and which Grant objects to.  I will have a patch soon
     that moves that to a powerpc private data structure (hopefully
     before rc1) and we'll improve things further later on (hopefully
     getting rid of the need for that pointer completely).  Thanks Gavin
     Shan.

   - I dug into our exception & interrupt handling code to improve the
     way we do lazy interrupt handling (and make it work properly with
     "edge" triggered interrupt sources), and while at it found & fixed
     a wagon of issues in those areas, including adding support for page
     fault retry & fatal signals on page faults.

   - Your usual random batch of small fixes & updates, including a bunch
     of new embedded boards, both Freescale and APM based ones, etc..."

I fixed up some conflicts with the generalized irq-domain changes from
Grant Likely, hopefully correctly.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits)
  powerpc/ps3: Do not adjust the wrapper load address
  powerpc: Remove the rest of the legacy iSeries include files
  powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces
  init: Remove CONFIG_PPC_ISERIES
  powerpc: Remove FW_FEATURE ISERIES from arch code
  tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable
  powerpc/spufs: Fix double unlocks
  powerpc/5200: convert mpc5200 to use of_platform_populate()
  powerpc/mpc5200: add options to mpc5200_defconfig
  powerpc/mpc52xx: add a4m072 board support
  powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
  Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup
  powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board
  powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board
  MAINTAINERS: Update PowerPC 4xx tree
  powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board
  powerpc: document the FSL MPIC message register binding
  powerpc: add support for MPIC message register API
  powerpc/fsl: Added aliased MSIIR register address to MSI node in dts
  powerpc/85xx: mpc8548cds - add 36-bit dts
  ...

1 files changed, 21 insertions, 41 deletions

diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 06c7251..58bddee 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -32,13 +32,13 @@
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/hvcall.h>
-#include <asm/iseries/lpar_map.h>
 #include <asm/thread_info.h>
 #include <asm/firmware.h>
 #include <asm/page_64.h>
 #include <asm/irqflags.h>
 #include <asm/kvm_book3s_asm.h>
 #include <asm/ptrace.h>
+#include <asm/hw_irq.h>
 
 /* The physical memory is laid out such that the secondary processor
  * spin code sits at 0x0000...0x00ff. On server, the vectors follow
@@ -57,10 +57,6 @@
  *	entry in r9 for debugging purposes
  *   2. Secondary processors enter at 0x60 with PIR in gpr3
  *
- *  For iSeries:
- *   1. The MMU is on (as it always is for iSeries)
- *   2. The kernel is entered at system_reset_iSeries
- *
  *  For Book3E processors:
  *   1. The MMU is on running in AS0 in a state defined in ePAPR
  *   2. The kernel is entered at __start
@@ -93,15 +89,6 @@ __secondary_hold_spinloop:
 __secondary_hold_acknowledge:
 	.llong	0x0
 
-#ifdef CONFIG_PPC_ISERIES
-	/*
-	 * At offset 0x20, there is a pointer to iSeries LPAR data.
-	 * This is required by the hypervisor
-	 */
-	. = 0x20
-	.llong hvReleaseData-KERNELBASE
-#endif /* CONFIG_PPC_ISERIES */
-
 #ifdef CONFIG_RELOCATABLE
 	/* This flag is set to 1 by a loader if the kernel should run
 	 * at the loaded address instead of the linked address.  This
@@ -564,7 +551,8 @@ _GLOBAL(pmac_secondary_start)
 	 */
 	li	r0,0
 	stb	r0,PACASOFTIRQEN(r13)
-	stb	r0,PACAHARDIRQEN(r13)
+	li	r0,PACA_IRQ_HARD_DIS
+	stb	r0,PACAIRQHAPPENED(r13)
 
 	/* Create a temp kernel stack for use before relocation is on.	*/
 	ld	r1,PACAEMERGSP(r13)
@@ -582,7 +570,7 @@ _GLOBAL(pmac_secondary_start)
  *   1. Processor number
  *   2. Segment table pointer (virtual address)
  * On entry the following are set:
- *   r1	       = stack pointer.  vaddr for iSeries, raddr (temp stack) for pSeries
+ *   r1	       = stack pointer (real addr of temp stack)
  *   r24       = cpu# (in Linux terms)
  *   r13       = paca virtual address
  *   SPRG_PACA = paca virtual address
@@ -595,7 +583,7 @@ __secondary_start:
 	/* Set thread priority to MEDIUM */
 	HMT_MEDIUM
 
-	/* Initialize the kernel stack.  Just a repeat for iSeries.	 */
+	/* Initialize the kernel stack */
 	LOAD_REG_ADDR(r3, current_set)
 	sldi	r28,r24,3		/* get current_set[cpu#]	 */
 	ldx	r14,r3,r28
@@ -615,20 +603,16 @@ __secondary_start:
 	li	r7,0
 	mtlr	r7
 
+	/* Mark interrupts soft and hard disabled (they might be enabled
+	 * in the PACA when doing hotplug)
+	 */
+	stb	r7,PACASOFTIRQEN(r13)
+	li	r0,PACA_IRQ_HARD_DIS
+	stb	r0,PACAIRQHAPPENED(r13)
+
 	/* enable MMU and jump to start_secondary */
 	LOAD_REG_ADDR(r3, .start_secondary_prolog)
 	LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	ori	r4,r4,MSR_EE
-	li	r8,1
-	stb	r8,PACAHARDIRQEN(r13)
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif
-BEGIN_FW_FTR_SECTION
-	stb	r7,PACAHARDIRQEN(r13)
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
-	stb	r7,PACASOFTIRQEN(r13)
 
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
@@ -771,22 +755,18 @@ _INIT_GLOBAL(start_here_common)
 	/* Load the TOC (virtual address) */
 	ld	r2,PACATOC(r13)
 
+	/* Do more system initializations in virtual mode */
 	bl	.setup_system
 
-	/* Load up the kernel context */
-5:
-	li	r5,0
-	stb	r5,PACASOFTIRQEN(r13)	/* Soft Disabled */
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	mfmsr	r5
-	ori	r5,r5,MSR_EE		/* Hard Enabled on iSeries*/
-	mtmsrd	r5
-	li	r5,1
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif
-	stb	r5,PACAHARDIRQEN(r13)	/* Hard Disabled on others */
+	/* Mark interrupts soft and hard disabled (they might be enabled
+	 * in the PACA when doing hotplug)
+	 */
+	li	r0,0
+	stb	r0,PACASOFTIRQEN(r13)
+	li	r0,PACA_IRQ_HARD_DIS
+	stb	r0,PACAIRQHAPPENED(r13)
 
+	/* Generic kernel entry */
 	bl	.start_kernel
 
 	/* Not reached */