summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/entry_32.S
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2009-06-17 17:43:59 +0000
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>2009-06-26 14:37:27 +1000
commit5d38902c483881645ba16058cffaa478b81e5cfa (patch)
tree1ed21b6a245c772a6d86cac7cd8ebe566dd970bb /arch/powerpc/kernel/entry_32.S
parent04a85d1234d7e1682a612565e663e6b760918643 (diff)
downloadop-kernel-dev-5d38902c483881645ba16058cffaa478b81e5cfa.zip
op-kernel-dev-5d38902c483881645ba16058cffaa478b81e5cfa.tar.gz
powerpc: Add irqtrace support for 32-bit powerpc
Based on initial work from: Dale Farnsworth <dale@farnsworth.org> Add the low level irq tracing hooks for 32-bit powerpc needed to enable full lockdep functionality. The approach taken to deal with the code in entry_32.S is that we don't trace all the transitions of MSR:EE when we just turn it off to peek at TI_FLAGS without races. Only when we are calling into C code or returning from exceptions with a state that have changed from what lockdep thinks. There's a little bugger though: If we take an exception that keeps interrupts enabled (such as an alignment exception) while interrupts are enabled, we will call trace_hardirqs_on() on the way back spurriously. Not a big deal, but to get rid of it would require remembering in pt_regs that the exception was one of the type that kept interrupts enabled which we don't know at this stage. (Well, we could test all cases for regs->trap but that sucks too much). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc/kernel/entry_32.S')
-rw-r--r--arch/powerpc/kernel/entry_32.S127
1 files changed, 123 insertions, 4 deletions
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 4dd38f1..3cadba6 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -191,11 +191,49 @@ transfer_to_handler_cont:
mflr r9
lwz r11,0(r9) /* virtual address of handler */
lwz r9,4(r9) /* where to go when done */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ lis r12,reenable_mmu@h
+ ori r12,r12,reenable_mmu@l
+ mtspr SPRN_SRR0,r12
+ mtspr SPRN_SRR1,r10
+ SYNC
+ RFI
+reenable_mmu: /* re-enable mmu so we can */
+ mfmsr r10
+ lwz r12,_MSR(r1)
+ xor r10,r10,r12
+ andi. r10,r10,MSR_EE /* Did EE change? */
+ beq 1f
+
+ /* Save handler and return address into the 2 unused words
+ * of the STACK_FRAME_OVERHEAD (sneak sneak sneak). Everything
+ * else can be recovered from the pt_regs except r3 which for
+ * normal interrupts has been set to pt_regs and for syscalls
+ * is an argument, so we temporarily use ORIG_GPR3 to save it
+ */
+ stw r9,8(r1)
+ stw r11,12(r1)
+ stw r3,ORIG_GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r0,GPR0(r1)
+ lwz r3,ORIG_GPR3(r1)
+ lwz r4,GPR4(r1)
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ lwz r9,8(r1)
+ lwz r11,12(r1)
+1: mtctr r11
+ mtlr r9
+ bctr /* jump to handler */
+#else /* CONFIG_TRACE_IRQFLAGS */
mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r10
mtlr r9
SYNC
RFI /* jump to handler, enable MMU */
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined (CONFIG_6xx) || defined(CONFIG_E500)
4: rlwinm r12,r12,0,~_TLF_NAPPING
@@ -251,6 +289,31 @@ _GLOBAL(DoSyscall)
#ifdef SHOW_SYSCALLS
bl do_show_syscall
#endif /* SHOW_SYSCALLS */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Return from syscalls can (and generally will) hard enable
+ * interrupts. You aren't supposed to call a syscall with
+ * interrupts disabled in the first place. However, to ensure
+ * that we get it right vs. lockdep if it happens, we force
+ * that hard enable here with appropriate tracing if we see
+ * that we have been called with interrupts off
+ */
+ mfmsr r11
+ andi. r12,r11,MSR_EE
+ bne+ 1f
+ /* We came in with interrupts disabled, we enable them now */
+ bl trace_hardirqs_on
+ mfmsr r11
+ lwz r0,GPR0(r1)
+ lwz r3,GPR3(r1)
+ lwz r4,GPR4(r1)
+ ori r11,r11,MSR_EE
+ lwz r5,GPR5(r1)
+ lwz r6,GPR6(r1)
+ lwz r7,GPR7(r1)
+ lwz r8,GPR8(r1)
+ mtmsr r11
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
rlwinm r10,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
lwz r11,TI_FLAGS(r10)
andi. r11,r11,_TIF_SYSCALL_T_OR_A
@@ -275,6 +338,7 @@ ret_from_syscall:
rlwinm r12,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */
/* disable interrupts so current_thread_info()->flags can't change */
LOAD_MSR_KERNEL(r10,MSR_KERNEL) /* doesn't include MSR_EE */
+ /* Note: We don't bother telling lockdep about it */
SYNC
MTMSRD(r10)
lwz r9,TI_FLAGS(r12)
@@ -288,6 +352,19 @@ ret_from_syscall:
oris r11,r11,0x1000 /* Set SO bit in CR */
stw r11,_CCR(r1)
syscall_exit_cont:
+ lwz r8,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* If we are going to return from the syscall with interrupts
+ * off, we trace that here. It shouldn't happen though but we
+ * want to catch the bugger if it does right ?
+ */
+ andi. r10,r8,MSR_EE
+ bne+ 1f
+ stw r3,GPR3(r1)
+ bl trace_hardirqs_off
+ lwz r3,GPR3(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
/* If the process has its own DBCR0 value, load it up. The internal
debug mode bit tells us that dbcr0 should be loaded. */
@@ -311,7 +388,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
mtlr r4
mtcr r5
lwz r7,_NIP(r1)
- lwz r8,_MSR(r1)
FIX_SRR1(r8, r0)
lwz r2,GPR2(r1)
lwz r1,GPR1(r1)
@@ -394,7 +470,9 @@ syscall_exit_work:
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
beq ret_from_except
- /* Re-enable interrupts */
+ /* Re-enable interrupts. There is no need to trace that with
+ * lockdep as we are supposed to have IRQs on at this point
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10)
@@ -705,6 +783,7 @@ ret_from_except:
/* Hard-disable interrupts so that current_thread_info()->flags
* can't change between when we test it and when we return
* from the interrupt. */
+ /* Note: We don't bother telling lockdep about it */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC /* Some chip revs have problems here... */
MTMSRD(r10) /* disable interrupts */
@@ -744,11 +823,24 @@ resume_kernel:
beq+ restore
andi. r0,r3,MSR_EE /* interrupts off? */
beq restore /* don't schedule if so */
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep thinks irqs are enabled, we need to call
+ * preempt_schedule_irq with IRQs off, so we inform lockdep
+ * now that we -did- turn them off already
+ */
+ bl trace_hardirqs_off
+#endif
1: bl preempt_schedule_irq
rlwinm r9,r1,0,0,(31-THREAD_SHIFT)
lwz r3,TI_FLAGS(r9)
andi. r0,r3,_TIF_NEED_RESCHED
bne- 1b
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* And now, to properly rebalance the above, we tell lockdep they
+ * are being turned back on, which will happen when we return
+ */
+ bl trace_hardirqs_on
+#endif
#else
resume_kernel:
#endif /* CONFIG_PREEMPT */
@@ -765,6 +857,28 @@ restore:
stw r6,icache_44x_need_flush@l(r4)
1:
#endif /* CONFIG_44x */
+
+ lwz r9,_MSR(r1)
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Lockdep doesn't know about the fact that IRQs are temporarily turned
+ * off in this assembly code while peeking at TI_FLAGS() and such. However
+ * we need to inform it if the exception turned interrupts off, and we
+ * are about to trun them back on.
+ *
+ * The problem here sadly is that we don't know whether the exceptions was
+ * one that turned interrupts off or not. So we always tell lockdep about
+ * turning them on here when we go back to wherever we came from with EE
+ * on, even if that may meen some redudant calls being tracked. Maybe later
+ * we could encode what the exception did somewhere or test the exception
+ * type in the pt_regs but that sounds overkill
+ */
+ andi. r10,r9,MSR_EE
+ beq 1f
+ bl trace_hardirqs_on
+ lwz r9,_MSR(r1)
+1:
+#endif /* CONFIG_TRACE_IRQFLAGS */
+
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
@@ -782,7 +896,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
stwcx. r0,0,r1 /* to clear the reservation */
#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
- lwz r9,_MSR(r1)
andi. r10,r9,MSR_RI /* check if this exception occurred */
beql nonrecoverable /* at a bad place (MSR:RI = 0) */
@@ -805,7 +918,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
MTMSRD(r10) /* clear the RI bit */
.globl exc_exit_restart
exc_exit_restart:
- lwz r9,_MSR(r1)
lwz r12,_NIP(r1)
FIX_SRR1(r9,r10)
mtspr SPRN_SRR0,r12
@@ -1035,11 +1147,18 @@ do_work: /* r10 contains MSR_KERNEL here */
beq do_user_signal
do_resched: /* r10 contains MSR_KERNEL here */
+ /* Note: We don't need to inform lockdep that we are enabling
+ * interrupts here. As far as it knows, they are already enabled
+ */
ori r10,r10,MSR_EE
SYNC
MTMSRD(r10) /* hard-enable interrupts */
bl schedule
recheck:
+ /* Note: And we don't tell it we are disabling them again
+ * neither. Those disable/enable cycles used to peek at
+ * TI_FLAGS aren't advertised.
+ */
LOAD_MSR_KERNEL(r10,MSR_KERNEL)
SYNC
MTMSRD(r10) /* disable interrupts */
OpenPOWER on IntegriCloud