powerpc/powernv: Invoke opal call to handle hmi.

When we hit the HMI in Linux, invoke opal call to handle/recover from HMI
errors in real mode and then in virtual mode during check_irq_replay()
invoke opal_poll_events()/opal_do_notifier() to retrieve HMI event from
OPAL and act accordingly.

Now that we are ready to handle HMI interrupt directly in linux, remove
the HMI interrupt registration with firmware.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

2 files changed, 48 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index efc16c3..b2f8ce1 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -148,6 +148,7 @@ struct opal_sg_list {
 #define OPAL_DUMP_RESEND			91
 #define OPAL_DUMP_INFO2				94
 #define OPAL_PCI_EEH_FREEZE_SET			97
+#define OPAL_HANDLE_HMI				98
 
 #ifndef __ASSEMBLY__
 
@@ -245,6 +246,7 @@ enum OpalMessageType {
 	OPAL_MSG_MEM_ERR,
 	OPAL_MSG_EPOW,
 	OPAL_MSG_SHUTDOWN,
+	OPAL_MSG_HMI_EVT,
 	OPAL_MSG_TYPE_MAX,
 };
 
@@ -513,6 +515,50 @@ struct OpalMemoryErrorData {
 	} u;
 };
 
+/* HMI interrupt event */
+enum OpalHMI_Version {
+	OpalHMIEvt_V1 = 1,
+};
+
+enum OpalHMI_Severity {
+	OpalHMI_SEV_NO_ERROR = 0,
+	OpalHMI_SEV_WARNING = 1,
+	OpalHMI_SEV_ERROR_SYNC = 2,
+	OpalHMI_SEV_FATAL = 3,
+};
+
+enum OpalHMI_Disposition {
+	OpalHMI_DISPOSITION_RECOVERED = 0,
+	OpalHMI_DISPOSITION_NOT_RECOVERED = 1,
+};
+
+enum OpalHMI_ErrType {
+	OpalHMI_ERROR_MALFUNC_ALERT	= 0,
+	OpalHMI_ERROR_PROC_RECOV_DONE,
+	OpalHMI_ERROR_PROC_RECOV_DONE_AGAIN,
+	OpalHMI_ERROR_PROC_RECOV_MASKED,
+	OpalHMI_ERROR_TFAC,
+	OpalHMI_ERROR_TFMR_PARITY,
+	OpalHMI_ERROR_HA_OVERFLOW_WARN,
+	OpalHMI_ERROR_XSCOM_FAIL,
+	OpalHMI_ERROR_XSCOM_DONE,
+	OpalHMI_ERROR_SCOM_FIR,
+	OpalHMI_ERROR_DEBUG_TRIG_FIR,
+	OpalHMI_ERROR_HYP_RESOURCE,
+};
+
+struct OpalHMIEvent {
+	uint8_t		version;	/* 0x00 */
+	uint8_t		severity;	/* 0x01 */
+	uint8_t		type;		/* 0x02 */
+	uint8_t		disposition;	/* 0x03 */
+	uint8_t		reserved_1[4];	/* 0x04 */
+
+	__be64		hmer;
+	/* TFMR register. Valid only for TFAC and TFMR_PARITY error type. */
+	__be64		tfmr;
+};
+
 enum {
 	OPAL_P7IOC_DIAG_TYPE_NONE	= 0,
 	OPAL_P7IOC_DIAG_TYPE_RGC	= 1,
@@ -873,6 +919,7 @@ int64_t opal_get_param(uint64_t token, uint32_t param_id, uint64_t buffer,
 int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer,
 		uint64_t length);
 int64_t opal_sensor_read(uint32_t sensor_hndl, int token, __be32 *sensor_data);
+int64_t opal_handle_hmi(void);
 
 /* Internal functions */
 extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 5abde4e..a5139ea 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -167,6 +167,7 @@ struct paca_struct {
 	 * and already using emergency stack.
 	 */
 	u16 in_mce;
+	u8 hmi_event_available;		 /* HMI event is available */
 #endif
 
 	/* Stuff for accurate time accounting */