powerpc/85xx: add alternate dts file for sbc8548 boot via SODIMM

By moving the two JP12 jumpers 90 degrees, and switching the
setting of SW2.8, the sbc8548 can be configured to boot off
the alternate 64MB SODIMM, which when populated with u-boot
can be a handy recovery option, in case the u-boot in the
8MB soldered on flash gets corrupted.  Here we add an alternate
dts file to match that configuration.

To better highlight the differences, the output from the u-boot
"fli" command is shown for the normal configuration and then
the alternate configuration.

Normal:
 -----------------------
Bank # 1: CFI conformant flash (8 x 8)  Size: 8 MB in 64 Sectors
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x17
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 2 ms, buffer size: 32 bytes

  Sector Start Addresses:
  FF800000 E      FF820000 E      FF840000 E      FF860000 E      FF880000 E
 [...]
  FFEE0000 E      FFF00000 E      FFF20000 E      FFF40000 E      FFF60000 E
  FFF80000        FFFA0000   RO   FFFC0000   RO   FFFE0000   RO

Bank # 2: CFI conformant flash (32 x 8)  Size: 64 MB in 128 Sectors
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x18
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 2 ms, buffer size: 32 bytes

  Sector Start Addresses:
  EC000000 E      EC080000 E      EC100000 E      EC180000 E      EC200000 E
 [...]
  EFC00000 E      EFC80000 E      EFD00000 E      EFD80000 E      EFE00000 E
  EFE80000 E      EFF00000        EFF80000
 -----------------------

Alternate:
 -----------------------
Bank # 1: CFI conformant flash (32 x 8)  Size: 64 MB in 128 Sectors
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x18
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 2 ms, buffer size: 32 bytes

  Sector Start Addresses:
  FC000000 E      FC080000 E      FC100000 E      FC180000 E      FC200000 E
 [...]
  FFC00000 E      FFC80000 E      FFD00000 E      FFD80000 E      FFE00000 E
  FFE80000 E      FFF00000   RO   FFF80000   RO

Bank # 2: CFI conformant flash (8 x 8)  Size: 8 MB in 64 Sectors
  Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x17
  Erase timeout: 4096 ms, write timeout: 1 ms
  Buffer write timeout: 2 ms, buffer size: 32 bytes

  Sector Start Addresses:
  EF800000 E      EF820000 E      EF840000 E      EF860000 E      EF880000 E
 [...]
  EFEE0000 E      EFF00000 E      EFF20000 E      EFF40000 E      EFF60000 E
  EFF80000 E      EFFA0000        EFFC0000        EFFE0000
 -----------------------

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 115 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/sbc8548-altflash.dts b/arch/powerpc/boot/dts/sbc8548-altflash.dts
new file mode 100644
index 0000000..0b38a0d
--- /dev/null
+++ b/arch/powerpc/boot/dts/sbc8548-altflash.dts
@@ -0,0 +1,115 @@
+/*
+ * SBC8548 Device Tree Source
+ *
+ * Configured for booting off the alternate (64MB SODIMM) flash.
+ * Requires switching JP12 jumpers and changing SW2.8 setting.
+ *
+ * Copyright 2013 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/dts-v1/;
+
+/include/ "sbc8548-pre.dtsi"
+
+/{
+	localbus@e0000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		reg = <0xe0000000 0x5000>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0x0 0x0 0xfc000000 0x04000000		/*64MB Flash*/
+			  0x3 0x0 0xf0000000 0x04000000		/*64MB SDRAM*/
+			  0x4 0x0 0xf4000000 0x04000000 	/*64MB SDRAM*/
+			  0x5 0x0 0xf8000000 0x00b10000		/* EPLD */
+			  0x6 0x0 0xef800000 0x00800000>;	/*8MB Flash*/
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x0 0x04000000>;
+			compatible = "intel,JS28F128", "cfi-flash";
+			bank-width = <4>;
+			device-width = <1>;
+			partition@0x0 {
+				label = "space";
+				/* FC000000 -> FFEFFFFF */
+				reg = <0x00000000 0x03f00000>;
+			};
+			partition@0x03f00000 {
+				label = "bootloader";
+				/* FFF00000 -> FFFFFFFF */
+				reg = <0x03f00000 0x00100000>;
+				read-only;
+			};
+                };
+
+
+		epld@5,0 {
+			compatible = "wrs,epld-localbus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			reg = <0x5 0x0 0x00b10000>;
+			ranges = <
+				0x0 0x0 0x5 0x000000 0x1fff	/* LED */
+				0x1 0x0 0x5 0x100000 0x1fff	/* Switches */
+				0x3 0x0 0x5 0x300000 0x1fff	/* HW Rev. */
+				0xb 0x0	0x5 0xb00000 0x1fff	/* EEPROM */
+			>;
+
+			led@0,0 {
+				compatible = "led";
+				reg = <0x0 0x0 0x1fff>;
+			};
+
+			switches@1,0 {
+				compatible = "switches";
+				reg = <0x1 0x0 0x1fff>;
+			};
+
+			hw-rev@3,0 {
+				compatible = "hw-rev";
+				reg = <0x3 0x0 0x1fff>;
+			};
+
+			eeprom@b,0 {
+				compatible = "eeprom";
+				reg = <0xb 0 0x1fff>;
+			};
+
+		};
+
+		alt-flash@6,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "intel,JS28F640", "cfi-flash";
+			reg = <0x6 0x0 0x800000>;
+			bank-width = <1>;
+			device-width = <1>;
+			partition@0x0 {
+				label = "space";
+				/* EF800000 -> EFF9FFFF */
+				reg = <0x00000000 0x007a0000>;
+			};
+			partition@0x7a0000 {
+				label = "bootloader";
+				/* EFFA0000 -> EFFFFFFF */
+				reg = <0x007a0000 0x00060000>;
+				read-only;
+			};
+		};
+
+
+        };
+};
+
+/include/ "sbc8548-post.dtsi"