powerpc/5200: Add support for the Media5200 board from Freescale

This patch adds board support for the Media5200 platform.  Changes are:
- add the media5200 device tree
- add the media5200 platform support code and cascaded interrupt controller
- add media5200 to the build targets.

Note: this patch also includes a minor tweak to the lite5200(b) target
images list to add the .dtb files to the image list.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

2 files changed, 321 insertions, 1 deletions

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index e84df33..8244813 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -235,7 +235,9 @@ image-$(CONFIG_PPC_ADDER875)		+= cuImage.adder875-uboot \
 					   dtbImage.adder875-redboot
 
 # Board ports in arch/powerpc/platform/52xx/Kconfig
-image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200 cuImage.lite5200b
+image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200 lite5200.dtb
+image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200b lite5200b.dtb
+image-$(CONFIG_PPC_MEDIA5200)		+= cuImage.media5200 media5200.dtb
 
 # Board ports in arch/powerpc/platform/82xx/Kconfig
 image-$(CONFIG_MPC8272_ADS)		+= cuImage.mpc8272ads
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
new file mode 100644
index 0000000..e297d8b
--- /dev/null
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -0,0 +1,318 @@
+/*
+ * Freescale Media5200 board Device Tree Source
+ *
+ * Copyright 2009 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely@secretlab.ca>
+ * Steven Cavanagh <scavanagh@secretlab.ca>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,media5200";
+	compatible = "fsl,media5200";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	aliases {
+		console = &console;
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		linux,stdout-path = &console;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;		// L1, 16K
+			i-cache-size = <0x4000>;		// L1, 16K
+			timebase-frequency = <33000000>;	// 33 MHz, these were configured by U-Boot
+			bus-frequency = <132000000>;		// 132 MHz
+			clock-frequency = <396000000>;		// 396 MHz
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB RAM
+	};
+
+	soc@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <132000000>;// 132 MHz
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		timer@610 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+		};
+
+		timer@620 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+		};
+
+		timer@630 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+		};
+
+		timer@640 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+		};
+
+		timer@650 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+		};
+
+		timer@660 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x660 0x10>;
+			interrupts = <1 15 0>;
+		};
+
+		timer@670 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x670 0x10>;
+			interrupts = <1 16 0>;
+		};
+
+		rtc@800 {	// Real time clock
+			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
+			reg = <0x800 0x100>;
+			interrupts = <1 5 0 1 6 0>;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi@f00 {
+			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+			reg = <0xf00 0x20>;
+			interrupts = <2 13 0 2 14 0>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0x100>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		// PSC6 in uart mode
+		console: serial@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			cell-index = <5>;
+			port-number = <0>;  // Logical port assignment
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		eth0: ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d00 0x40>;
+			interrupts = <2 15 0>;
+			fsl5200-clocking;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+			fsl5200-clocking;
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
+				 0xc000 0 0 2 &media5200_fpga 0 3
+				 0xc000 0 0 3 &media5200_fpga 0 4
+				 0xc000 0 0 4 &media5200_fpga 0 5
+
+				 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot
+				 0xc800 0 0 2 &media5200_fpga 0 4
+				 0xc800 0 0 3 &media5200_fpga 0 5
+				 0xc800 0 0 4 &media5200_fpga 0 2
+
+				 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI
+				 0xd000 0 0 2 &media5200_fpga 0 5
+
+				 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
+				>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		interrupt-parent = <&mpc5200_pic>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = < 0 0 0xfc000000 0x02000000
+			   1 0 0xfe000000 0x02000000
+			   2 0 0xf0010000 0x00010000
+			   3 0 0xf0020000 0x00010000 >;
+
+		flash@0,0 {
+			compatible = "amd,am29lv28ml", "cfi-flash";
+			reg = <0 0x0 0x2000000>;		// 32 MB
+			bank-width = <4>;			// Width in bytes of the flash bank
+			device-width = <2>;			// Two devices on each bank
+		};
+
+		flash@1,0 {
+			compatible = "amd,am29lv28ml", "cfi-flash";
+			reg = <1 0 0x2000000>;			// 32 MB
+			bank-width = <4>;			// Width in bytes of the flash bank
+			device-width = <2>;			// Two devices on each bank
+		};
+
+		media5200_fpga: fpga@2,0 {
+			compatible = "fsl,media5200-fpga";
+			interrupt-controller;
+			#interrupt-cells = <2>;	// 0:bank 1:id; no type field
+			reg = <2 0 0x10000>;
+
+			interrupt-parent = <&mpc5200_pic>;
+			interrupts = <0 0 3	// IRQ bank 0
+			              1 1 3>;	// IRQ bank 1
+		};
+
+		uart@3,0 {
+			compatible = "ti,tl16c752bpt";
+			reg = <3 0 0x10000>;
+			interrupt-parent = <&media5200_fpga>;
+			interrupts = <0 0  0 1>; // 2 irqs
+		};
+	};
+};