summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/Kconfig.debug
diff options
context:
space:
mode:
authorScott Wood <scottwood@freescale.com>2007-07-16 11:43:43 -0500
committerKumar Gala <galak@kernel.crashing.org>2007-10-03 20:35:43 -0500
commitc374e00e17f1c10768d5af922a1ff33e43df2eb0 (patch)
treefc6149e7f3b86bb202c475d4414a926c481761b8 /arch/powerpc/Kconfig.debug
parente631ae3b164158fbf486fbed5adb597696c4f0e5 (diff)
downloadop-kernel-dev-c374e00e17f1c10768d5af922a1ff33e43df2eb0.zip
op-kernel-dev-c374e00e17f1c10768d5af922a1ff33e43df2eb0.tar.gz
[POWERPC] Add early debug console for CPM serial ports.
This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc/Kconfig.debug')
-rw-r--r--arch/powerpc/Kconfig.debug21
1 files changed, 21 insertions, 0 deletions
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index c38bc22..f4e5d22 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -221,6 +221,15 @@ config PPC_EARLY_DEBUG_44x
Select this to enable early debugging for IBM 44x chips via the
inbuilt serial port.
+config PPC_EARLY_DEBUG_CPM
+ bool "Early serial debugging for Freescale CPM-based serial ports"
+ depends on SERIAL_CPM
+ select PIN_TLB if PPC_8xx
+ help
+ Select this to enable early debugging for Freescale chips
+ using a CPM-based serial port. This assumes that the bootwrapper
+ has run, and set up the CPM in a particular way.
+
endchoice
config PPC_EARLY_DEBUG_44x_PHYSLOW
@@ -233,4 +242,16 @@ config PPC_EARLY_DEBUG_44x_PHYSHIGH
depends PPC_EARLY_DEBUG_44x
default "0x1"
+config PPC_EARLY_DEBUG_CPM_ADDR
+ hex "CPM UART early debug transmit descriptor address"
+ depends on PPC_EARLY_DEBUG_CPM
+ default "0xfa202808" if PPC_EP88XC
+ default "0xf0000808" if CPM2
+ default "0xff002808" if CPM1
+ help
+ This specifies the address of the transmit descriptor
+ used for early debug output. Because it is needed before
+ platform probing is done, all platforms selected must
+ share the same address.
+
endmenu
OpenPOWER on IntegriCloud