summaryrefslogtreecommitdiffstats
path: root/arch/nios2
diff options
context:
space:
mode:
authorMathieu Malaterre <malat@debian.org>2018-02-11 22:59:18 +0800
committerLey Foon Tan <ley.foon.tan@intel.com>2018-02-11 23:04:47 +0800
commit5d13c73179983f8692adf397e65f2f57c613a917 (patch)
tree80458c02e8798b906aa83f621a8d354ca161fe22 /arch/nios2
parentd8a5b80568a9cb66810e75b182018e9edb68e8ff (diff)
downloadop-kernel-dev-5d13c73179983f8692adf397e65f2f57c613a917.zip
op-kernel-dev-5d13c73179983f8692adf397e65f2f57c613a917.tar.gz
nios2: dts: Remove leading 0x and 0s from bindings notation
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Diffstat (limited to 'arch/nios2')
-rw-r--r--arch/nios2/boot/dts/3c120_devboard.dts16
1 files changed, 8 insertions, 8 deletions
diff --git a/arch/nios2/boot/dts/3c120_devboard.dts b/arch/nios2/boot/dts/3c120_devboard.dts
index 36ccdf0..56f4b5d 100644
--- a/arch/nios2/boot/dts/3c120_devboard.dts
+++ b/arch/nios2/boot/dts/3c120_devboard.dts
@@ -29,7 +29,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu: cpu@0x0 {
+ cpu: cpu@0 {
device_type = "cpu";
compatible = "altr,nios2-1.0";
reg = <0x00000000>;
@@ -69,7 +69,7 @@
compatible = "altr,avalon", "simple-bus";
bus-frequency = <125000000>;
- pb_cpu_to_io: bridge@0x8000000 {
+ pb_cpu_to_io: bridge@8000000 {
compatible = "simple-bus";
reg = <0x08000000 0x00800000>;
#address-cells = <1>;
@@ -83,7 +83,7 @@
<0x00008000 0x08008000 0x00000020>,
<0x00400000 0x08400000 0x00000020>;
- timer_1ms: timer@0x400000 {
+ timer_1ms: timer@400000 {
compatible = "altr,timer-1.0";
reg = <0x00400000 0x00000020>;
interrupt-parent = <&cpu>;
@@ -91,7 +91,7 @@
clock-frequency = <125000000>;
};
- timer_0: timer@0x8000 {
+ timer_0: timer@8000 {
compatible = "altr,timer-1.0";
reg = < 0x00008000 0x00000020 >;
interrupt-parent = < &cpu >;
@@ -99,14 +99,14 @@
clock-frequency = < 125000000 >;
};
- jtag_uart: serial@0x4d50 {
+ jtag_uart: serial@4d50 {
compatible = "altr,juart-1.0";
reg = <0x00004d50 0x00000008>;
interrupt-parent = <&cpu>;
interrupts = <1>;
};
- tse_mac: ethernet@0x4000 {
+ tse_mac: ethernet@4000 {
compatible = "altr,tse-1.0";
reg = <0x00004000 0x00000400>,
<0x00004400 0x00000040>,
@@ -133,7 +133,7 @@
};
};
- uart: serial@0x4c80 {
+ uart: serial@4c80 {
compatible = "altr,uart-1.0";
reg = <0x00004c80 0x00000020>;
interrupt-parent = <&cpu>;
@@ -143,7 +143,7 @@
};
};
- cfi_flash_64m: flash@0x0 {
+ cfi_flash_64m: flash@0 {
compatible = "cfi-flash";
reg = <0x00000000 0x04000000>;
bank-width = <2>;
OpenPOWER on IntegriCloud